Remove (accidentally prematurely added).

[gnulib.git] / doc / gnulib.texi

\input texinfo   @c -*-texinfo-*-
@comment $Id: gnulib.texi,v 1.6 2004-09-29 10:58:47 haible Exp $
@comment %**start of header
@setfilename gnulib.info
@settitle GNU Gnulib
@syncodeindex fn cp
@syncodeindex pg cp
@comment %**end of header

@set UPDATED $Date: 2004-09-29 10:58:47 $

@copying
This manual is for GNU Gnulib (updated @value{UPDATED}),
which is a library of common routines intended to be shared at the
source level.

Copyright @copyright{} 2004 Free Software Foundation, Inc.

@quotation
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with the Front-Cover Texts being ``A GNU Manual,''
and with the Back-Cover Texts as in (a) below.  A copy of the
license is included in the section entitled ``GNU Free Documentation
License.''

(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
this GNU Manual, like GNU software.  Copies published by the Free
Software Foundation raise funds for GNU development.''
@end quotation
@end copying

@dircategory Software development
@direntry
* Gnulib: (gnulib).             Source files to share among distributions.
@end direntry

@titlepage
@title GNU Gnulib
@subtitle updated @value{UPDATED}
@author @email{bug-gnulib@@gnu.org}
@page
@vskip 0pt plus 1filll
@insertcopying
@end titlepage

@contents

@ifnottex
@node Top
@top GNU Gnulib

@insertcopying
@end ifnottex

@menu
* Gnulib::
* Invoking gnulib-tool::
* Copying This Manual::
* Index::
@end menu


@node Gnulib
@chapter Gnulib

This is not a real manual.  It's just a place to store random notes
until someone (you?) gets around to actually writing a manual.

Getting started:

@itemize
@item Gnulib is hosted at Savannah:
      @url{http://savannah.gnu.org/projects/gnulib}.  Get the sources
      through CVS from there.
@item The Gnulib home page:
      @url{http://www.gnu.org/software/gnulib/}.
@end itemize

@menu
* Comments::
* Header files::
* ctime::
* inet_ntoa::
* Out of memory handling::
@end menu

@node Comments
@section Comments

@cindex comments describing functions
@cindex describing functions, locating
Where to put comments describing functions: Because of risk of
divergence, we prefer to keep most function describing comments in
only one place: just above the actual function definition.  Some
people prefer to put that documentation in the .h file.  In any case,
it should appear in just one place unless you can ensure that the
multiple copies will always remain identical.


@node Header files
@section Header files

@cindex double inclusion of header files
@cindex header file include protection
It is a tradition to use CPP tricks to avoid parsing the same header
file more than once, which might cause warnings.  The trick is to wrap
the content of the header file (say, @file{foo.h}) in a block, as in:

@example
#ifndef FOO_H
# define FOO_H
...
body of header file goes here
...
#endif /* FOO_H */
@end example

Whether to use @code{FOO_H} or @code{_FOO_H} is a matter of taste and
style.  The C89 and C99 standards reserve all identifiers that begin with an
underscore and either an uppercase letter or another underscore, for
any use.  Thus, in theory, an application might not safely assume that
@code{_FOO_H} has not already been defined by a library.  On the other
hand, using @code{FOO_H} will likely lead the higher risk of
collisions with other symbols (e.g., @code{KEY_H}, @code{XK_H}, @code{BPF_H},
which are CPP macro constants, or @code{COFF_LONG_H}, which is a CPP
macro function).  Your preference may depend on whether you consider
the header file under discussion as part of the application (which has
its own namespace for CPP symbols) or a supporting library (that
shouldn't interfere with the application's CPP symbol namespace).

@cindex C++ header files
@cindex Header files and C++
Adapting C header files for use in C++ applications can use another
CPP trick, as in:

@example
# ifdef __cplusplus
extern "C"
@{
# endif
...
body of header file goes here
...
# ifdef __cplusplus
@}
# endif
@end example

The idea here is that @code{__cplusplus} is defined only by C++
implementations, which will wrap the header file in an @samp{extern "C"}
block.  Again, whether to use this trick is a matter of taste and
style.  While the above can be seen as harmless, it could be argued
that the header file is written in C, and any C++ application using it
should explicitly use the @samp{extern "C"} block itself.  Your
preference might depend on whether you consider the API exported by
your header file as something available for C programs only, or for C
and C++ programs alike.

@node ctime
@section ctime
@findex ctime

The @code{ctime} function need not be reentrant, and consequently is
not required to be thread safe.  Implementations of @code{ctime}
typically write the time stamp into static buffer.  If two threads
call @code{ctime} at roughly the same time, you might end up with the
wrong date in one of the threads, or some undefined string.  There is
a re-entrant interface @code{ctime_r}, that take a pre-allocated
buffer and length of the buffer, and return @code{NULL} on errors.
The input buffer should be at least 26 bytes in size.  The output
string is locale-independent.  However, years can have more than 4
digits if @code{time_t} is sufficiently wide, so the length of the
required output buffer is not easy to determine.  Increasing the
buffer size when @code{ctime_r} return @code{NULL} is not necessarily
sufficient. The @code{NULL} return value could mean some other error
condition, which will not go away by increasing the buffer size.

A more flexible function is @code{strftime}.  However, note that it is
locale dependent.


@node inet_ntoa
@section inet_ntoa
@findex inet_ntoa

The @code{inet_ntoa} function need not be reentrant, and consequently
is not required to be thread safe.  Implementations of
@code{inet_ntoa} typically write the time stamp into static buffer.
If two threads call @code{inet_ntoa} at roughly the same time, you
might end up with the wrong date in one of the threads, or some
undefined string.  Further, @code{inet_ntoa} is specific for
@acronym{IPv4} addresses.

A protocol independent function is @code{inet_ntop}.


@node Out of memory handling
@section Out of memory handling

@cindex Out of Memory handling
@cindex Memory allocation failure
The GSS API does not have a standard error code for the out of memory
error condition.  Instead of adding a non-standard error code, this
library has chosen to adopt a different strategy.  Out of memory
handling happens in rare situations, but performing the out of memory
error handling after almost all API function invocations pollute your
source code and might make it harder to spot more serious problems.
The strategy chosen improve code readability and robustness.

@cindex Aborting execution
For most applications, aborting the application with an error message
when the out of memory situation occur is the best that can be wished
for.  This is how the library behaves by default.

@vindex xalloc_fail_func
However, we realize that some applications may not want to have the
GSS library abort execution in any situation.  The GSS library support
a hook to let the application regain control and perform its own
cleanups when an out of memory situation has occured.  The application
can define a function (having a @code{void} prototype, i.e., no return
value and no parameters) and set the library variable
@code{xalloc_fail_func} to that function.  The variable should be
declared as follows.

@example
extern void (*xalloc_fail_func) (void);
@end example

The GSS library will invoke this function if an out of memory error
occurs.  Note that after this the GSS library is in an undefined
state, so you must unload or restart the application to continue call
GSS library functions.  The hook is only intended to allow the
application to log the situation in a special way.  Of course, care
must be taken to not allocate more memory, as that will likely also
fail.


@node Invoking gnulib-tool
@chapter Invoking gnulib-tool

@pindex gnulib-tool
@cindex invoking @command{gnulib-tool}

Run @samp{gnulib-tool --help}, and use the source.
@command{gnulib-tool} is the way to import Gnulib modules.

@menu
* Initial import::              First import of Gnulib modules.
* Importing updated files::     Subsequent imports.
* Finishing touches::           Simplifying imports.
@end menu


@node Initial import
@section Initial import
@cindex initial import

Gnulib assumes your project uses Autoconf and Automake.  Invoking
@samp{gnulib-tool --import} will copy source files, create a
@file{Makefile.am} to build them, and generate a @file{gnulib.m4} with
Autoconf M4 macro declarations used by @file{configure.ac}.

Our example will be a library that uses Autoconf, Automake and
Libtool.  It calls @code{strdup}, and you wish to use gnulib to make
the package portable to C89 (which doesn't have @code{strdup}).

@example
~/src/libfoo$ gnulib-tool --import strdup
Module list with included dependencies:
  strdup
File list:
  lib/strdup.c
  lib/strdup.h
  m4/onceonly_2_57.m4
  m4/strdup.m4
Creating ./lib/Makefile.am...
Creating ./m4/gnulib.m4...
Finished.

Don't forget to add "lib/Makefile"
to AC_CONFIG_FILES in "./configure.ac" and to mention
"lib" in SUBDIRS in some Makefile.am.
~/src/libfoo$
@end example

By default, the source code is copied into @file{lib/} and the M4
macros in @file{m4/}.  You can override these paths by using
@code{--source-base=DIRECTORY} and @code{--m4-base=DIRECTORY}, or by
adding @samp{gl_SOURCE_BASE(DIRECTORY)} and
@samp{gl_M4_BASE(DIRECTORY)} to your @file{configure.ac}.

@code{gnulib-tool} will overwrite any pre-existing files, in
particular @file{Makefile.am}.  Unfortunately, separating the
generated @file{Makefile.am} content (for building the gnulib library)
into a separate file, say @file{gnulib.mk}, that could be included
by your handwritten @file{Makefile.am} is not possible, due to how
variable assignments are handled by Automake.

Consequently, it can be a good idea to chose directories that are not
already used by your projects, to separate gnulib imported files from
your own files.  This approach can also be useful if you want to avoid
conflicts between other tools (e.g., @code{getextize} that also copy
M4 files into your package.  Simon Josefsson successfully uses a source
base of @file{gl/}, and a M4 base of @file{gl/m4/}, in several
packages.

A few manual steps are required to finish the initial import.

First, you need to make sure Autoconf can find the macro definitions
in @file{gnulib.m4}.  Use the @code{ACLOCAL_AMFLAGS} specifier in your
top-level @file{Makefile.am} file, as in:

@example
ACLOCAL_AMFLAGS = -I m4
@end example

Naturally, replace @file{m4} with the value from @code{--m4-base} or
@code{gl_M4_BASE}.  If the M4 base is @file{gl/m4} you would use:

@example
ACLOCAL_AMFLAGS = -I gl/m4
@end example

You are now ready to call the M4 macros in @code{gnulib.m4} from
@file{configure.ac}.  The macro @code{gl_EARLY} must be called as soon
as possible after verifying that the C compiler is working.
Typically, this is immediately after @code{AC_PROG_CC}, as in:

@example
...
AC_PROG_CC
gl_EARLY
...
@end example

The core part of the gnulib checks are done by the macro
@code{gl_INIT}.  Place it further down in the file, typically where
you normally check for header files or functions.  Or in a separate
section with other gnulib statements, such as @code{gl_SOURCE_BASE}.
For example:

@example
...
# For gnulib.
gl_INIT
...
@end example

You must also make sure that the gnulib library is built.  Add the
@code{Makefile} in the gnulib source base directory to
@code{AC_CONFIG_FILES}, as in:

@example
AC_CONFIG_FILES(... lib/Makefile ...)
@end example

If your gnulib source base is @file{gl}, you would use:

@example
AC_CONFIG_FILES(... gl/Makefile ...)
@end example

You must also make sure that @code{make} work in the gnulib directory.
Add the gnulib source base directory to a @code{SUBDIRS} Makefile.am
statement, as in:

@example
SUBDIRS = lib
@end example

or if you, more likely, already have a few entries in @code{SUBDIRS},
you can add something like:

@example
SUBDIRS += lib
@end example

If you are using a gnulib source base of @code{gl}, you would use:

@example
SUBDIRS += gl
@end example

Finally, you have add C flags and LD flags, so that you can make use
of the gnulib library.  For example:

@example
...
AM_CPPFLAGS = -I$(top_srcdir)/lib
...
LIBADD = lib/libgnu.la
...
@end example

Don't forget to @code{#include} the various header files.  In this
example, you would need to make sure that @samp{#include <strdup.h>}
is evaluated when compiling all source code files, that want to make
use of @code{strdup}.


@node Importing updated files
@section Importing updated files

From time to time, you may want to invoke @samp{gnulib-tool --import}
to update the files in your package.  Once you have set up your
package for gnulib, this step is quite simple.  For example:

@example
~/src/libfoo$ gnulib-tool --import --source-base gl --m4-base gl/m4 strdup
Module list with included dependencies:
  strdup
File list:
  lib/strdup.c
  lib/strdup.h
  m4/onceonly_2_57.m4
  m4/strdup.m4
Creating ./lib/Makefile.am...
Creating ./m4/gnulib.m4...
Finished.

Don't forget to add "lib/Makefile"
to AC_CONFIG_FILES in "./configure.ac" and to mention
"lib" in SUBDIRS in some Makefile.am.
~/src/libfoo$
@end example

If you don't recall how you invoked the tool last time, the commands
used (and the operations it resulted in) are placed in comments within
the generated @file{Makefile.am} and @file{gnulib.m4}, as in:

@example
...
# Invoked as: gnulib-tool --import strdup
# Reproduce by: gnulib-tool --import --dir=. --lib=libgnu --source-base=lib --m4-base=m4 --libtool strdup
...
@end example


@node Finishing touches
@section Finishing touches

Invoking @samp{gnulib-tool --import} with the proper parameters (e.g.,
@samp{--m4-base gl/m4}) and list of modules (e.g., @samp{strdup
snprintf getline minmax}) can be tedious.  To simplify this procedure,
you may put the command line parameters in your @file{configure.ac}.
For example:

@example
...
AC_PROG_CC
gl_EARLY
...
# For gnulib.
gl_SOURCE_BASE(gl)
gl_M4_BASE(gl/m4)
gl_LIB(libgl)
gl_MODULES(getopt progname strdup dummy exit error getpass-gnu getaddrinfo)
gl_INIT
...
@end example

This illustrate all macros defined in @file{gnulib.m4}.  With the
above, importing new files are as simple as running @samp{gnulib-tool
--import} with no additional parameters.

The macros @code{gl_EARLY}, @code{gl_INIT}, @code{gl_SOURCE_BASE}, and
@code{gl_M4_BASE} have been discussed earlier.  The @code{gl_LIB}
macro can be used if you wish to change the library name (by default
@file{libgnu.a} or @file{libgnu.la} if you use libtool).  The
@code{gl_MODULES} macro is used to specify which modules to import.


@node Copying This Manual
@appendix Copying This Manual

@menu
* GNU Free Documentation License::  License for copying this manual.
@end menu

@include fdl.texi


@node Index
@unnumbered Index

@printindex cp

@bye