1 /* Extended regular expression matching and search library,
3 (Implements POSIX draft P10003.2/D11.2, except for
4 internationalization features.)
6 Copyright (C) 1993, 1994, 1995 Free Software Foundation, Inc.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2, or (at your option)
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
22 /* AIX requires this to be the first thing in the file. */
23 #if defined (_AIX) && !defined (REGEX_MALLOC)
33 /* We need this for `regex.h', and perhaps for the Emacs include files. */
34 #include <sys/types.h>
36 /* This is for other GNU distributions with internationalized messages. */
37 #if HAVE_LIBINTL_H || defined (_LIBC)
40 # define gettext(msgid) (msgid)
43 /* The `emacs' switch turns on certain matching commands
44 that make sense only in Emacs. */
53 /* If we are not linking with Emacs proper,
54 we can't use the relocating allocator
55 even if config.h says that we can. */
58 #if defined (STDC_HEADERS) || defined (_LIBC)
65 /* We used to test for `BSTRING' here, but only GCC and Emacs define
66 `BSTRING', as far as I know, and neither of them use this code. */
67 #ifndef INHIBIT_STRING_HEADER
68 #if HAVE_STRING_H || STDC_HEADERS || defined (_LIBC)
71 #define bcmp(s1, s2, n) memcmp ((s1), (s2), (n))
74 #define bcopy(s, d, n) memcpy ((d), (s), (n))
77 #define bzero(s, n) memset ((s), 0, (n))
84 /* Define the syntax stuff for \<, \>, etc. */
86 /* This must be nonzero for the wordchar and notwordchar pattern
87 commands in re_match_2. */
92 #ifdef SWITCH_ENUM_BUG
93 #define SWITCH_ENUM_CAST(x) ((int)(x))
95 #define SWITCH_ENUM_CAST(x) (x)
100 extern char *re_syntax_table;
102 #else /* not SYNTAX_TABLE */
104 /* How many characters in the character set. */
105 #define CHAR_SET_SIZE 256
107 static char re_syntax_table[CHAR_SET_SIZE];
118 bzero (re_syntax_table, sizeof re_syntax_table);
120 for (c = 'a'; c <= 'z'; c++)
121 re_syntax_table[c] = Sword;
123 for (c = 'A'; c <= 'Z'; c++)
124 re_syntax_table[c] = Sword;
126 for (c = '0'; c <= '9'; c++)
127 re_syntax_table[c] = Sword;
129 re_syntax_table['_'] = Sword;
134 #endif /* not SYNTAX_TABLE */
136 #define SYNTAX(c) re_syntax_table[c]
138 #endif /* not emacs */
140 /* Get the interface, including the syntax bits. */
143 /* isalpha etc. are used for the character classes. */
146 /* Jim Meyering writes:
148 "... Some ctype macros are valid only for character codes that
149 isascii says are ASCII (SGI's IRIX-4.0.5 is one such system --when
150 using /bin/cc or gcc but without giving an ansi option). So, all
151 ctype uses should be through macros like ISPRINT... If
152 STDC_HEADERS is defined, then autoconf has verified that the ctype
153 macros don't need to be guarded with references to isascii. ...
154 Defining isascii to 1 should let any compiler worth its salt
155 eliminate the && through constant folding." */
157 #if defined (STDC_HEADERS) || (!defined (isascii) && !defined (HAVE_ISASCII))
160 #define ISASCII(c) isascii(c)
164 #define ISBLANK(c) (ISASCII (c) && isblank (c))
166 #define ISBLANK(c) ((c) == ' ' || (c) == '\t')
169 #define ISGRAPH(c) (ISASCII (c) && isgraph (c))
171 #define ISGRAPH(c) (ISASCII (c) && isprint (c) && !isspace (c))
174 #define ISPRINT(c) (ISASCII (c) && isprint (c))
175 #define ISDIGIT(c) (ISASCII (c) && isdigit (c))
176 #define ISALNUM(c) (ISASCII (c) && isalnum (c))
177 #define ISALPHA(c) (ISASCII (c) && isalpha (c))
178 #define ISCNTRL(c) (ISASCII (c) && iscntrl (c))
179 #define ISLOWER(c) (ISASCII (c) && islower (c))
180 #define ISPUNCT(c) (ISASCII (c) && ispunct (c))
181 #define ISSPACE(c) (ISASCII (c) && isspace (c))
182 #define ISUPPER(c) (ISASCII (c) && isupper (c))
183 #define ISXDIGIT(c) (ISASCII (c) && isxdigit (c))
189 /* We remove any previous definition of `SIGN_EXTEND_CHAR',
190 since ours (we hope) works properly with all combinations of
191 machines, compilers, `char' and `unsigned char' argument types.
192 (Per Bothner suggested the basic approach.) */
193 #undef SIGN_EXTEND_CHAR
195 #define SIGN_EXTEND_CHAR(c) ((signed char) (c))
196 #else /* not __STDC__ */
197 /* As in Harbison and Steele. */
198 #define SIGN_EXTEND_CHAR(c) ((((unsigned char) (c)) ^ 128) - 128)
201 /* Should we use malloc or alloca? If REGEX_MALLOC is not defined, we
202 use `alloca' instead of `malloc'. This is because using malloc in
203 re_search* or re_match* could cause memory leaks when C-g is used in
204 Emacs; also, malloc is slower and causes storage fragmentation. On
205 the other hand, malloc is more portable, and easier to debug.
207 Because we sometimes use alloca, some routines have to be macros,
208 not functions -- `alloca'-allocated space disappears at the end of the
209 function it is called in. */
213 #define REGEX_ALLOCATE malloc
214 #define REGEX_REALLOCATE(source, osize, nsize) realloc (source, nsize)
215 #define REGEX_FREE free
217 #else /* not REGEX_MALLOC */
219 /* Emacs already defines alloca, sometimes. */
222 /* Make alloca work the best possible way. */
224 #define alloca __builtin_alloca
225 #else /* not __GNUC__ */
228 #else /* not __GNUC__ or HAVE_ALLOCA_H */
229 #ifndef _AIX /* Already did AIX, up at the top. */
231 #endif /* not _AIX */
232 #endif /* not HAVE_ALLOCA_H */
233 #endif /* not __GNUC__ */
235 #endif /* not alloca */
237 #define REGEX_ALLOCATE alloca
239 /* Assumes a `char *destination' variable. */
240 #define REGEX_REALLOCATE(source, osize, nsize) \
241 (destination = (char *) alloca (nsize), \
242 bcopy (source, destination, osize), \
245 /* No need to do anything to free, after alloca. */
246 #define REGEX_FREE(arg) (0)
248 #endif /* not REGEX_MALLOC */
250 /* Define how to allocate the failure stack. */
253 #define REGEX_ALLOCATE_STACK(size) \
254 r_alloc (&failure_stack_ptr, (size))
255 #define REGEX_REALLOCATE_STACK(source, osize, nsize) \
256 r_re_alloc (&failure_stack_ptr, (nsize))
257 #define REGEX_FREE_STACK(ptr) \
258 r_alloc_free (&failure_stack_ptr)
260 #else /* not REL_ALLOC */
264 #define REGEX_ALLOCATE_STACK malloc
265 #define REGEX_REALLOCATE_STACK(source, osize, nsize) realloc (source, nsize)
266 #define REGEX_FREE_STACK free
268 #else /* not REGEX_MALLOC */
270 #define REGEX_ALLOCATE_STACK alloca
272 #define REGEX_REALLOCATE_STACK(source, osize, nsize) \
273 REGEX_REALLOCATE (source, osize, nsize)
274 /* No need to explicitly free anything. */
275 #define REGEX_FREE_STACK(arg)
277 #endif /* not REGEX_MALLOC */
278 #endif /* not REL_ALLOC */
281 /* True if `size1' is non-NULL and PTR is pointing anywhere inside
282 `string1' or just past its end. This works if PTR is NULL, which is
284 #define FIRST_STRING_P(ptr) \
285 (size1 && string1 <= (ptr) && (ptr) <= string1 + size1)
287 /* (Re)Allocate N items of type T using malloc, or fail. */
288 #define TALLOC(n, t) ((t *) malloc ((n) * sizeof (t)))
289 #define RETALLOC(addr, n, t) ((addr) = (t *) realloc (addr, (n) * sizeof (t)))
290 #define RETALLOC_IF(addr, n, t) \
291 if (addr) RETALLOC((addr), (n), t); else (addr) = TALLOC ((n), t)
292 #define REGEX_TALLOC(n, t) ((t *) REGEX_ALLOCATE ((n) * sizeof (t)))
294 #define BYTEWIDTH 8 /* In bits. */
296 #define STREQ(s1, s2) ((strcmp (s1, s2) == 0))
300 #define MAX(a, b) ((a) > (b) ? (a) : (b))
301 #define MIN(a, b) ((a) < (b) ? (a) : (b))
303 typedef char boolean;
307 static int re_match_2_internal ();
309 /* These are the command codes that appear in compiled regular
310 expressions. Some opcodes are followed by argument bytes. A
311 command code can specify any interpretation whatsoever for its
312 arguments. Zero bytes may appear in the compiled regular expression. */
318 /* Succeed right away--no more backtracking. */
321 /* Followed by one byte giving n, then by n literal bytes. */
324 /* Matches any (more or less) character. */
327 /* Matches any one char belonging to specified set. First
328 following byte is number of bitmap bytes. Then come bytes
329 for a bitmap saying which chars are in. Bits in each byte
330 are ordered low-bit-first. A character is in the set if its
331 bit is 1. A character too large to have a bit in the map is
332 automatically not in the set. */
335 /* Same parameters as charset, but match any character that is
336 not one of those specified. */
339 /* Start remembering the text that is matched, for storing in a
340 register. Followed by one byte with the register number, in
341 the range 0 to one less than the pattern buffer's re_nsub
342 field. Then followed by one byte with the number of groups
343 inner to this one. (This last has to be part of the
344 start_memory only because we need it in the on_failure_jump
348 /* Stop remembering the text that is matched and store it in a
349 memory register. Followed by one byte with the register
350 number, in the range 0 to one less than `re_nsub' in the
351 pattern buffer, and one byte with the number of inner groups,
352 just like `start_memory'. (We need the number of inner
353 groups here because we don't have any easy way of finding the
354 corresponding start_memory when we're at a stop_memory.) */
357 /* Match a duplicate of something remembered. Followed by one
358 byte containing the register number. */
361 /* Fail unless at beginning of line. */
364 /* Fail unless at end of line. */
367 /* Succeeds if at beginning of buffer (if emacs) or at beginning
368 of string to be matched (if not). */
371 /* Analogously, for end of buffer/string. */
374 /* Followed by two byte relative address to which to jump. */
377 /* Same as jump, but marks the end of an alternative. */
380 /* Followed by two-byte relative address of place to resume at
381 in case of failure. */
384 /* Like on_failure_jump, but pushes a placeholder instead of the
385 current string position when executed. */
386 on_failure_keep_string_jump,
388 /* Throw away latest failure point and then jump to following
389 two-byte relative address. */
392 /* Change to pop_failure_jump if know won't have to backtrack to
393 match; otherwise change to jump. This is used to jump
394 back to the beginning of a repeat. If what follows this jump
395 clearly won't match what the repeat does, such that we can be
396 sure that there is no use backtracking out of repetitions
397 already matched, then we change it to a pop_failure_jump.
398 Followed by two-byte address. */
401 /* Jump to following two-byte address, and push a dummy failure
402 point. This failure point will be thrown away if an attempt
403 is made to use it for a failure. A `+' construct makes this
404 before the first repeat. Also used as an intermediary kind
405 of jump when compiling an alternative. */
408 /* Push a dummy failure point and continue. Used at the end of
412 /* Followed by two-byte relative address and two-byte number n.
413 After matching N times, jump to the address upon failure. */
416 /* Followed by two-byte relative address, and two-byte number n.
417 Jump to the address N times, then fail. */
420 /* Set the following two-byte relative address to the
421 subsequent two-byte number. The address *includes* the two
425 wordchar, /* Matches any word-constituent character. */
426 notwordchar, /* Matches any char that is not a word-constituent. */
428 wordbeg, /* Succeeds if at word beginning. */
429 wordend, /* Succeeds if at word end. */
431 wordbound, /* Succeeds if at a word boundary. */
432 notwordbound /* Succeeds if not at a word boundary. */
435 ,before_dot, /* Succeeds if before point. */
436 at_dot, /* Succeeds if at point. */
437 after_dot, /* Succeeds if after point. */
439 /* Matches any character whose syntax is specified. Followed by
440 a byte which contains a syntax code, e.g., Sword. */
443 /* Matches any character whose syntax is not that specified. */
448 /* Common operations on the compiled pattern. */
450 /* Store NUMBER in two contiguous bytes starting at DESTINATION. */
452 #define STORE_NUMBER(destination, number) \
454 (destination)[0] = (number) & 0377; \
455 (destination)[1] = (number) >> 8; \
458 /* Same as STORE_NUMBER, except increment DESTINATION to
459 the byte after where the number is stored. Therefore, DESTINATION
460 must be an lvalue. */
462 #define STORE_NUMBER_AND_INCR(destination, number) \
464 STORE_NUMBER (destination, number); \
465 (destination) += 2; \
468 /* Put into DESTINATION a number stored in two contiguous bytes starting
471 #define EXTRACT_NUMBER(destination, source) \
473 (destination) = *(source) & 0377; \
474 (destination) += SIGN_EXTEND_CHAR (*((source) + 1)) << 8; \
479 extract_number (dest, source)
481 unsigned char *source;
483 int temp = SIGN_EXTEND_CHAR (*(source + 1));
484 *dest = *source & 0377;
488 #ifndef EXTRACT_MACROS /* To debug the macros. */
489 #undef EXTRACT_NUMBER
490 #define EXTRACT_NUMBER(dest, src) extract_number (&dest, src)
491 #endif /* not EXTRACT_MACROS */
495 /* Same as EXTRACT_NUMBER, except increment SOURCE to after the number.
496 SOURCE must be an lvalue. */
498 #define EXTRACT_NUMBER_AND_INCR(destination, source) \
500 EXTRACT_NUMBER (destination, source); \
506 extract_number_and_incr (destination, source)
508 unsigned char **source;
510 extract_number (destination, *source);
514 #ifndef EXTRACT_MACROS
515 #undef EXTRACT_NUMBER_AND_INCR
516 #define EXTRACT_NUMBER_AND_INCR(dest, src) \
517 extract_number_and_incr (&dest, &src)
518 #endif /* not EXTRACT_MACROS */
522 /* If DEBUG is defined, Regex prints many voluminous messages about what
523 it is doing (if the variable `debug' is nonzero). If linked with the
524 main program in `iregex.c', you can enter patterns and strings
525 interactively. And if linked with the main program in `main.c' and
526 the other test files, you can run the already-written tests. */
530 /* We use standard I/O for debugging. */
533 /* It is useful to test things that ``must'' be true when debugging. */
536 static int debug = 0;
538 #define DEBUG_STATEMENT(e) e
539 #define DEBUG_PRINT1(x) if (debug) printf (x)
540 #define DEBUG_PRINT2(x1, x2) if (debug) printf (x1, x2)
541 #define DEBUG_PRINT3(x1, x2, x3) if (debug) printf (x1, x2, x3)
542 #define DEBUG_PRINT4(x1, x2, x3, x4) if (debug) printf (x1, x2, x3, x4)
543 #define DEBUG_PRINT_COMPILED_PATTERN(p, s, e) \
544 if (debug) print_partial_compiled_pattern (s, e)
545 #define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2) \
546 if (debug) print_double_string (w, s1, sz1, s2, sz2)
549 /* Print the fastmap in human-readable form. */
552 print_fastmap (fastmap)
555 unsigned was_a_range = 0;
558 while (i < (1 << BYTEWIDTH))
564 while (i < (1 << BYTEWIDTH) && fastmap[i])
580 /* Print a compiled pattern string in human-readable form, starting at
581 the START pointer into it and ending just before the pointer END. */
584 print_partial_compiled_pattern (start, end)
585 unsigned char *start;
589 unsigned char *p = start;
590 unsigned char *pend = end;
598 /* Loop over pattern commands. */
601 printf ("%d:\t", p - start);
603 switch ((re_opcode_t) *p++)
611 printf ("/exactn/%d", mcnt);
622 printf ("/start_memory/%d/%d", mcnt, *p++);
627 printf ("/stop_memory/%d/%d", mcnt, *p++);
631 printf ("/duplicate/%d", *p++);
641 register int c, last = -100;
642 register int in_range = 0;
644 printf ("/charset [%s",
645 (re_opcode_t) *(p - 1) == charset_not ? "^" : "");
647 assert (p + *p < pend);
649 for (c = 0; c < 256; c++)
651 && (p[1 + (c/8)] & (1 << (c % 8))))
653 /* Are we starting a range? */
654 if (last + 1 == c && ! in_range)
659 /* Have we broken a range? */
660 else if (last + 1 != c && in_range)
689 case on_failure_jump:
690 extract_number_and_incr (&mcnt, &p);
691 printf ("/on_failure_jump to %d", p + mcnt - start);
694 case on_failure_keep_string_jump:
695 extract_number_and_incr (&mcnt, &p);
696 printf ("/on_failure_keep_string_jump to %d", p + mcnt - start);
699 case dummy_failure_jump:
700 extract_number_and_incr (&mcnt, &p);
701 printf ("/dummy_failure_jump to %d", p + mcnt - start);
704 case push_dummy_failure:
705 printf ("/push_dummy_failure");
709 extract_number_and_incr (&mcnt, &p);
710 printf ("/maybe_pop_jump to %d", p + mcnt - start);
713 case pop_failure_jump:
714 extract_number_and_incr (&mcnt, &p);
715 printf ("/pop_failure_jump to %d", p + mcnt - start);
719 extract_number_and_incr (&mcnt, &p);
720 printf ("/jump_past_alt to %d", p + mcnt - start);
724 extract_number_and_incr (&mcnt, &p);
725 printf ("/jump to %d", p + mcnt - start);
729 extract_number_and_incr (&mcnt, &p);
730 extract_number_and_incr (&mcnt2, &p);
731 printf ("/succeed_n to %d, %d times", p + mcnt - start, mcnt2);
735 extract_number_and_incr (&mcnt, &p);
736 extract_number_and_incr (&mcnt2, &p);
737 printf ("/jump_n to %d, %d times", p + mcnt - start, mcnt2);
741 extract_number_and_incr (&mcnt, &p);
742 extract_number_and_incr (&mcnt2, &p);
743 printf ("/set_number_at location %d to %d", p + mcnt - start, mcnt2);
747 printf ("/wordbound");
751 printf ("/notwordbound");
763 printf ("/before_dot");
771 printf ("/after_dot");
775 printf ("/syntaxspec");
777 printf ("/%d", mcnt);
781 printf ("/notsyntaxspec");
783 printf ("/%d", mcnt);
788 printf ("/wordchar");
792 printf ("/notwordchar");
804 printf ("?%d", *(p-1));
810 printf ("%d:\tend of pattern.\n", p - start);
815 print_compiled_pattern (bufp)
816 struct re_pattern_buffer *bufp;
818 unsigned char *buffer = bufp->buffer;
820 print_partial_compiled_pattern (buffer, buffer + bufp->used);
821 printf ("%d bytes used/%d bytes allocated.\n", bufp->used, bufp->allocated);
823 if (bufp->fastmap_accurate && bufp->fastmap)
825 printf ("fastmap: ");
826 print_fastmap (bufp->fastmap);
829 printf ("re_nsub: %d\t", bufp->re_nsub);
830 printf ("regs_alloc: %d\t", bufp->regs_allocated);
831 printf ("can_be_null: %d\t", bufp->can_be_null);
832 printf ("newline_anchor: %d\n", bufp->newline_anchor);
833 printf ("no_sub: %d\t", bufp->no_sub);
834 printf ("not_bol: %d\t", bufp->not_bol);
835 printf ("not_eol: %d\t", bufp->not_eol);
836 printf ("syntax: %d\n", bufp->syntax);
837 /* Perhaps we should print the translate table? */
842 print_double_string (where, string1, size1, string2, size2)
855 if (FIRST_STRING_P (where))
857 for (this_char = where - string1; this_char < size1; this_char++)
858 putchar (string1[this_char]);
863 for (this_char = where - string2; this_char < size2; this_char++)
864 putchar (string2[this_char]);
868 #else /* not DEBUG */
873 #define DEBUG_STATEMENT(e)
874 #define DEBUG_PRINT1(x)
875 #define DEBUG_PRINT2(x1, x2)
876 #define DEBUG_PRINT3(x1, x2, x3)
877 #define DEBUG_PRINT4(x1, x2, x3, x4)
878 #define DEBUG_PRINT_COMPILED_PATTERN(p, s, e)
879 #define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2)
881 #endif /* not DEBUG */
883 /* Set by `re_set_syntax' to the current regexp syntax to recognize. Can
884 also be assigned to arbitrarily: each pattern buffer stores its own
885 syntax, so it can be changed between regex compilations. */
886 /* This has no initializer because initialized variables in Emacs
887 become read-only after dumping. */
888 reg_syntax_t re_syntax_options;
891 /* Specify the precise syntax of regexps for compilation. This provides
892 for compatibility for various utilities which historically have
893 different, incompatible syntaxes.
895 The argument SYNTAX is a bit mask comprised of the various bits
896 defined in regex.h. We return the old syntax. */
899 re_set_syntax (syntax)
902 reg_syntax_t ret = re_syntax_options;
904 re_syntax_options = syntax;
908 /* This table gives an error message for each of the error codes listed
909 in regex.h. Obviously the order here has to be same as there.
910 POSIX doesn't require that we do anything for REG_NOERROR,
911 but why not be nice? */
913 static const char *re_error_msgid[] =
914 { "Success", /* REG_NOERROR */
915 "No match", /* REG_NOMATCH */
916 "Invalid regular expression", /* REG_BADPAT */
917 "Invalid collation character", /* REG_ECOLLATE */
918 "Invalid character class name", /* REG_ECTYPE */
919 "Trailing backslash", /* REG_EESCAPE */
920 "Invalid back reference", /* REG_ESUBREG */
921 "Unmatched [ or [^", /* REG_EBRACK */
922 "Unmatched ( or \\(", /* REG_EPAREN */
923 "Unmatched \\{", /* REG_EBRACE */
924 "Invalid content of \\{\\}", /* REG_BADBR */
925 "Invalid range end", /* REG_ERANGE */
926 "Memory exhausted", /* REG_ESPACE */
927 "Invalid preceding regular expression", /* REG_BADRPT */
928 "Premature end of regular expression", /* REG_EEND */
929 "Regular expression too big", /* REG_ESIZE */
930 "Unmatched ) or \\)", /* REG_ERPAREN */
933 /* Avoiding alloca during matching, to placate r_alloc. */
935 /* Define MATCH_MAY_ALLOCATE unless we need to make sure that the
936 searching and matching functions should not call alloca. On some
937 systems, alloca is implemented in terms of malloc, and if we're
938 using the relocating allocator routines, then malloc could cause a
939 relocation, which might (if the strings being searched are in the
940 ralloc heap) shift the data out from underneath the regexp
943 Here's another reason to avoid allocation: Emacs
944 processes input from X in a signal handler; processing X input may
945 call malloc; if input arrives while a matching routine is calling
946 malloc, then we're scrod. But Emacs can't just block input while
947 calling matching routines; then we don't notice interrupts when
948 they come in. So, Emacs blocks input around all regexp calls
949 except the matching calls, which it leaves unprotected, in the
950 faith that they will not malloc. */
952 /* Normally, this is fine. */
953 #define MATCH_MAY_ALLOCATE
955 /* When using GNU C, we are not REALLY using the C alloca, no matter
956 what config.h may say. So don't take precautions for it. */
961 /* The match routines may not allocate if (1) they would do it with malloc
962 and (2) it's not safe for them to use malloc.
963 Note that if REL_ALLOC is defined, matching would not use malloc for the
964 failure stack, but we would still use it for the register vectors;
965 so REL_ALLOC should not affect this. */
966 #if (defined (C_ALLOCA) || defined (REGEX_MALLOC)) && defined (emacs)
967 #undef MATCH_MAY_ALLOCATE
971 /* Failure stack declarations and macros; both re_compile_fastmap and
972 re_match_2 use a failure stack. These have to be macros because of
973 REGEX_ALLOCATE_STACK. */
976 /* Number of failure points for which to initially allocate space
977 when matching. If this number is exceeded, we allocate more
978 space, so it is not a hard limit. */
979 #ifndef INIT_FAILURE_ALLOC
980 #define INIT_FAILURE_ALLOC 5
983 /* Roughly the maximum number of failure points on the stack. Would be
984 exactly that if always used MAX_FAILURE_SPACE each time we failed.
985 This is a variable only so users of regex can assign to it; we never
986 change it ourselves. */
987 #if defined (MATCH_MAY_ALLOCATE)
988 int re_max_failures = 200000;
990 int re_max_failures = 2000;
995 unsigned char *pointer;
999 typedef union fail_stack_elt fail_stack_elt_t;
1003 fail_stack_elt_t *stack;
1005 unsigned avail; /* Offset of next open position. */
1008 #define FAIL_STACK_EMPTY() (fail_stack.avail == 0)
1009 #define FAIL_STACK_PTR_EMPTY() (fail_stack_ptr->avail == 0)
1010 #define FAIL_STACK_FULL() (fail_stack.avail == fail_stack.size)
1013 /* Define macros to initialize and free the failure stack.
1014 Do `return -2' if the alloc fails. */
1016 #ifdef MATCH_MAY_ALLOCATE
1017 #define INIT_FAIL_STACK() \
1019 fail_stack.stack = (fail_stack_elt_t *) \
1020 REGEX_ALLOCATE_STACK (INIT_FAILURE_ALLOC * sizeof (fail_stack_elt_t)); \
1022 if (fail_stack.stack == NULL) \
1025 fail_stack.size = INIT_FAILURE_ALLOC; \
1026 fail_stack.avail = 0; \
1029 #define RESET_FAIL_STACK() REGEX_FREE_STACK (fail_stack.stack)
1031 #define INIT_FAIL_STACK() \
1033 fail_stack.avail = 0; \
1036 #define RESET_FAIL_STACK()
1040 /* Double the size of FAIL_STACK, up to approximately `re_max_failures' items.
1042 Return 1 if succeeds, and 0 if either ran out of memory
1043 allocating space for it or it was already too large.
1045 REGEX_REALLOCATE_STACK requires `destination' be declared. */
1047 #define DOUBLE_FAIL_STACK(fail_stack) \
1048 ((fail_stack).size > re_max_failures * MAX_FAILURE_ITEMS \
1050 : ((fail_stack).stack = (fail_stack_elt_t *) \
1051 REGEX_REALLOCATE_STACK ((fail_stack).stack, \
1052 (fail_stack).size * sizeof (fail_stack_elt_t), \
1053 ((fail_stack).size << 1) * sizeof (fail_stack_elt_t)), \
1055 (fail_stack).stack == NULL \
1057 : ((fail_stack).size <<= 1, \
1061 /* Push pointer POINTER on FAIL_STACK.
1062 Return 1 if was able to do so and 0 if ran out of memory allocating
1064 #define PUSH_PATTERN_OP(POINTER, FAIL_STACK) \
1065 ((FAIL_STACK_FULL () \
1066 && !DOUBLE_FAIL_STACK (FAIL_STACK)) \
1068 : ((FAIL_STACK).stack[(FAIL_STACK).avail++].pointer = POINTER, \
1071 /* Push a pointer value onto the failure stack.
1072 Assumes the variable `fail_stack'. Probably should only
1073 be called from within `PUSH_FAILURE_POINT'. */
1074 #define PUSH_FAILURE_POINTER(item) \
1075 fail_stack.stack[fail_stack.avail++].pointer = (unsigned char *) (item)
1077 /* This pushes an integer-valued item onto the failure stack.
1078 Assumes the variable `fail_stack'. Probably should only
1079 be called from within `PUSH_FAILURE_POINT'. */
1080 #define PUSH_FAILURE_INT(item) \
1081 fail_stack.stack[fail_stack.avail++].integer = (item)
1083 /* Push a fail_stack_elt_t value onto the failure stack.
1084 Assumes the variable `fail_stack'. Probably should only
1085 be called from within `PUSH_FAILURE_POINT'. */
1086 #define PUSH_FAILURE_ELT(item) \
1087 fail_stack.stack[fail_stack.avail++] = (item)
1089 /* These three POP... operations complement the three PUSH... operations.
1090 All assume that `fail_stack' is nonempty. */
1091 #define POP_FAILURE_POINTER() fail_stack.stack[--fail_stack.avail].pointer
1092 #define POP_FAILURE_INT() fail_stack.stack[--fail_stack.avail].integer
1093 #define POP_FAILURE_ELT() fail_stack.stack[--fail_stack.avail]
1095 /* Used to omit pushing failure point id's when we're not debugging. */
1097 #define DEBUG_PUSH PUSH_FAILURE_INT
1098 #define DEBUG_POP(item_addr) *(item_addr) = POP_FAILURE_INT ()
1100 #define DEBUG_PUSH(item)
1101 #define DEBUG_POP(item_addr)
1105 /* Push the information about the state we will need
1106 if we ever fail back to it.
1108 Requires variables fail_stack, regstart, regend, reg_info, and
1109 num_regs be declared. DOUBLE_FAIL_STACK requires `destination' be
1112 Does `return FAILURE_CODE' if runs out of memory. */
1114 #define PUSH_FAILURE_POINT(pattern_place, string_place, failure_code) \
1116 char *destination; \
1117 /* Must be int, so when we don't save any registers, the arithmetic \
1118 of 0 + -1 isn't done as unsigned. */ \
1121 DEBUG_STATEMENT (failure_id++); \
1122 DEBUG_STATEMENT (nfailure_points_pushed++); \
1123 DEBUG_PRINT2 ("\nPUSH_FAILURE_POINT #%u:\n", failure_id); \
1124 DEBUG_PRINT2 (" Before push, next avail: %d\n", (fail_stack).avail);\
1125 DEBUG_PRINT2 (" size: %d\n", (fail_stack).size);\
1127 DEBUG_PRINT2 (" slots needed: %d\n", NUM_FAILURE_ITEMS); \
1128 DEBUG_PRINT2 (" available: %d\n", REMAINING_AVAIL_SLOTS); \
1130 /* Ensure we have enough space allocated for what we will push. */ \
1131 while (REMAINING_AVAIL_SLOTS < NUM_FAILURE_ITEMS) \
1133 if (!DOUBLE_FAIL_STACK (fail_stack)) \
1134 return failure_code; \
1136 DEBUG_PRINT2 ("\n Doubled stack; size now: %d\n", \
1137 (fail_stack).size); \
1138 DEBUG_PRINT2 (" slots available: %d\n", REMAINING_AVAIL_SLOTS);\
1141 /* Push the info, starting with the registers. */ \
1142 DEBUG_PRINT1 ("\n"); \
1144 for (this_reg = lowest_active_reg; this_reg <= highest_active_reg; \
1147 DEBUG_PRINT2 (" Pushing reg: %d\n", this_reg); \
1148 DEBUG_STATEMENT (num_regs_pushed++); \
1150 DEBUG_PRINT2 (" start: 0x%x\n", regstart[this_reg]); \
1151 PUSH_FAILURE_POINTER (regstart[this_reg]); \
1153 DEBUG_PRINT2 (" end: 0x%x\n", regend[this_reg]); \
1154 PUSH_FAILURE_POINTER (regend[this_reg]); \
1156 DEBUG_PRINT2 (" info: 0x%x\n ", reg_info[this_reg]); \
1157 DEBUG_PRINT2 (" match_null=%d", \
1158 REG_MATCH_NULL_STRING_P (reg_info[this_reg])); \
1159 DEBUG_PRINT2 (" active=%d", IS_ACTIVE (reg_info[this_reg])); \
1160 DEBUG_PRINT2 (" matched_something=%d", \
1161 MATCHED_SOMETHING (reg_info[this_reg])); \
1162 DEBUG_PRINT2 (" ever_matched=%d", \
1163 EVER_MATCHED_SOMETHING (reg_info[this_reg])); \
1164 DEBUG_PRINT1 ("\n"); \
1165 PUSH_FAILURE_ELT (reg_info[this_reg].word); \
1168 DEBUG_PRINT2 (" Pushing low active reg: %d\n", lowest_active_reg);\
1169 PUSH_FAILURE_INT (lowest_active_reg); \
1171 DEBUG_PRINT2 (" Pushing high active reg: %d\n", highest_active_reg);\
1172 PUSH_FAILURE_INT (highest_active_reg); \
1174 DEBUG_PRINT2 (" Pushing pattern 0x%x: ", pattern_place); \
1175 DEBUG_PRINT_COMPILED_PATTERN (bufp, pattern_place, pend); \
1176 PUSH_FAILURE_POINTER (pattern_place); \
1178 DEBUG_PRINT2 (" Pushing string 0x%x: `", string_place); \
1179 DEBUG_PRINT_DOUBLE_STRING (string_place, string1, size1, string2, \
1181 DEBUG_PRINT1 ("'\n"); \
1182 PUSH_FAILURE_POINTER (string_place); \
1184 DEBUG_PRINT2 (" Pushing failure id: %u\n", failure_id); \
1185 DEBUG_PUSH (failure_id); \
1188 /* This is the number of items that are pushed and popped on the stack
1189 for each register. */
1190 #define NUM_REG_ITEMS 3
1192 /* Individual items aside from the registers. */
1194 #define NUM_NONREG_ITEMS 5 /* Includes failure point id. */
1196 #define NUM_NONREG_ITEMS 4
1199 /* We push at most this many items on the stack. */
1200 #define MAX_FAILURE_ITEMS ((num_regs - 1) * NUM_REG_ITEMS + NUM_NONREG_ITEMS)
1202 /* We actually push this many items. */
1203 #define NUM_FAILURE_ITEMS \
1204 ((highest_active_reg - lowest_active_reg + 1) * NUM_REG_ITEMS \
1207 /* How many items can still be added to the stack without overflowing it. */
1208 #define REMAINING_AVAIL_SLOTS ((fail_stack).size - (fail_stack).avail)
1211 /* Pops what PUSH_FAIL_STACK pushes.
1213 We restore into the parameters, all of which should be lvalues:
1214 STR -- the saved data position.
1215 PAT -- the saved pattern position.
1216 LOW_REG, HIGH_REG -- the highest and lowest active registers.
1217 REGSTART, REGEND -- arrays of string positions.
1218 REG_INFO -- array of information about each subexpression.
1220 Also assumes the variables `fail_stack' and (if debugging), `bufp',
1221 `pend', `string1', `size1', `string2', and `size2'. */
1223 #define POP_FAILURE_POINT(str, pat, low_reg, high_reg, regstart, regend, reg_info)\
1225 DEBUG_STATEMENT (fail_stack_elt_t failure_id;) \
1227 const unsigned char *string_temp; \
1229 assert (!FAIL_STACK_EMPTY ()); \
1231 /* Remove failure points and point to how many regs pushed. */ \
1232 DEBUG_PRINT1 ("POP_FAILURE_POINT:\n"); \
1233 DEBUG_PRINT2 (" Before pop, next avail: %d\n", fail_stack.avail); \
1234 DEBUG_PRINT2 (" size: %d\n", fail_stack.size); \
1236 assert (fail_stack.avail >= NUM_NONREG_ITEMS); \
1238 DEBUG_POP (&failure_id); \
1239 DEBUG_PRINT2 (" Popping failure id: %u\n", failure_id); \
1241 /* If the saved string location is NULL, it came from an \
1242 on_failure_keep_string_jump opcode, and we want to throw away the \
1243 saved NULL, thus retaining our current position in the string. */ \
1244 string_temp = POP_FAILURE_POINTER (); \
1245 if (string_temp != NULL) \
1246 str = (const char *) string_temp; \
1248 DEBUG_PRINT2 (" Popping string 0x%x: `", str); \
1249 DEBUG_PRINT_DOUBLE_STRING (str, string1, size1, string2, size2); \
1250 DEBUG_PRINT1 ("'\n"); \
1252 pat = (unsigned char *) POP_FAILURE_POINTER (); \
1253 DEBUG_PRINT2 (" Popping pattern 0x%x: ", pat); \
1254 DEBUG_PRINT_COMPILED_PATTERN (bufp, pat, pend); \
1256 /* Restore register info. */ \
1257 high_reg = (unsigned) POP_FAILURE_INT (); \
1258 DEBUG_PRINT2 (" Popping high active reg: %d\n", high_reg); \
1260 low_reg = (unsigned) POP_FAILURE_INT (); \
1261 DEBUG_PRINT2 (" Popping low active reg: %d\n", low_reg); \
1263 for (this_reg = high_reg; this_reg >= low_reg; this_reg--) \
1265 DEBUG_PRINT2 (" Popping reg: %d\n", this_reg); \
1267 reg_info[this_reg].word = POP_FAILURE_ELT (); \
1268 DEBUG_PRINT2 (" info: 0x%x\n", reg_info[this_reg]); \
1270 regend[this_reg] = (const char *) POP_FAILURE_POINTER (); \
1271 DEBUG_PRINT2 (" end: 0x%x\n", regend[this_reg]); \
1273 regstart[this_reg] = (const char *) POP_FAILURE_POINTER (); \
1274 DEBUG_PRINT2 (" start: 0x%x\n", regstart[this_reg]); \
1277 set_regs_matched_done = 0; \
1278 DEBUG_STATEMENT (nfailure_points_popped++); \
1279 } /* POP_FAILURE_POINT */
1283 /* Structure for per-register (a.k.a. per-group) information.
1284 Other register information, such as the
1285 starting and ending positions (which are addresses), and the list of
1286 inner groups (which is a bits list) are maintained in separate
1289 We are making a (strictly speaking) nonportable assumption here: that
1290 the compiler will pack our bit fields into something that fits into
1291 the type of `word', i.e., is something that fits into one item on the
1296 fail_stack_elt_t word;
1299 /* This field is one if this group can match the empty string,
1300 zero if not. If not yet determined, `MATCH_NULL_UNSET_VALUE'. */
1301 #define MATCH_NULL_UNSET_VALUE 3
1302 unsigned match_null_string_p : 2;
1303 unsigned is_active : 1;
1304 unsigned matched_something : 1;
1305 unsigned ever_matched_something : 1;
1307 } register_info_type;
1309 #define REG_MATCH_NULL_STRING_P(R) ((R).bits.match_null_string_p)
1310 #define IS_ACTIVE(R) ((R).bits.is_active)
1311 #define MATCHED_SOMETHING(R) ((R).bits.matched_something)
1312 #define EVER_MATCHED_SOMETHING(R) ((R).bits.ever_matched_something)
1315 /* Call this when have matched a real character; it sets `matched' flags
1316 for the subexpressions which we are currently inside. Also records
1317 that those subexprs have matched. */
1318 #define SET_REGS_MATCHED() \
1321 if (!set_regs_matched_done) \
1324 set_regs_matched_done = 1; \
1325 for (r = lowest_active_reg; r <= highest_active_reg; r++) \
1327 MATCHED_SOMETHING (reg_info[r]) \
1328 = EVER_MATCHED_SOMETHING (reg_info[r]) \
1335 /* Registers are set to a sentinel when they haven't yet matched. */
1336 static char reg_unset_dummy;
1337 #define REG_UNSET_VALUE (®_unset_dummy)
1338 #define REG_UNSET(e) ((e) == REG_UNSET_VALUE)
1340 /* Subroutine declarations and macros for regex_compile. */
1342 static void store_op1 (), store_op2 ();
1343 static void insert_op1 (), insert_op2 ();
1344 static boolean at_begline_loc_p (), at_endline_loc_p ();
1345 static boolean group_in_compile_stack ();
1346 static reg_errcode_t compile_range ();
1348 /* Fetch the next character in the uncompiled pattern---translating it
1349 if necessary. Also cast from a signed character in the constant
1350 string passed to us by the user to an unsigned char that we can use
1351 as an array index (in, e.g., `translate'). */
1352 #define PATFETCH(c) \
1353 do {if (p == pend) return REG_EEND; \
1354 c = (unsigned char) *p++; \
1355 if (translate) c = translate[c]; \
1358 /* Fetch the next character in the uncompiled pattern, with no
1360 #define PATFETCH_RAW(c) \
1361 do {if (p == pend) return REG_EEND; \
1362 c = (unsigned char) *p++; \
1365 /* Go backwards one character in the pattern. */
1366 #define PATUNFETCH p--
1369 /* If `translate' is non-null, return translate[D], else just D. We
1370 cast the subscript to translate because some data is declared as
1371 `char *', to avoid warnings when a string constant is passed. But
1372 when we use a character as a subscript we must make it unsigned. */
1373 #define TRANSLATE(d) (translate ? translate[(unsigned char) (d)] : (d))
1376 /* Macros for outputting the compiled pattern into `buffer'. */
1378 /* If the buffer isn't allocated when it comes in, use this. */
1379 #define INIT_BUF_SIZE 32
1381 /* Make sure we have at least N more bytes of space in buffer. */
1382 #define GET_BUFFER_SPACE(n) \
1383 while (b - bufp->buffer + (n) > bufp->allocated) \
1386 /* Make sure we have one more byte of buffer space and then add C to it. */
1387 #define BUF_PUSH(c) \
1389 GET_BUFFER_SPACE (1); \
1390 *b++ = (unsigned char) (c); \
1394 /* Ensure we have two more bytes of buffer space and then append C1 and C2. */
1395 #define BUF_PUSH_2(c1, c2) \
1397 GET_BUFFER_SPACE (2); \
1398 *b++ = (unsigned char) (c1); \
1399 *b++ = (unsigned char) (c2); \
1403 /* As with BUF_PUSH_2, except for three bytes. */
1404 #define BUF_PUSH_3(c1, c2, c3) \
1406 GET_BUFFER_SPACE (3); \
1407 *b++ = (unsigned char) (c1); \
1408 *b++ = (unsigned char) (c2); \
1409 *b++ = (unsigned char) (c3); \
1413 /* Store a jump with opcode OP at LOC to location TO. We store a
1414 relative address offset by the three bytes the jump itself occupies. */
1415 #define STORE_JUMP(op, loc, to) \
1416 store_op1 (op, loc, (to) - (loc) - 3)
1418 /* Likewise, for a two-argument jump. */
1419 #define STORE_JUMP2(op, loc, to, arg) \
1420 store_op2 (op, loc, (to) - (loc) - 3, arg)
1422 /* Like `STORE_JUMP', but for inserting. Assume `b' is the buffer end. */
1423 #define INSERT_JUMP(op, loc, to) \
1424 insert_op1 (op, loc, (to) - (loc) - 3, b)
1426 /* Like `STORE_JUMP2', but for inserting. Assume `b' is the buffer end. */
1427 #define INSERT_JUMP2(op, loc, to, arg) \
1428 insert_op2 (op, loc, (to) - (loc) - 3, arg, b)
1431 /* This is not an arbitrary limit: the arguments which represent offsets
1432 into the pattern are two bytes long. So if 2^16 bytes turns out to
1433 be too small, many things would have to change. */
1434 #define MAX_BUF_SIZE (1L << 16)
1437 /* Extend the buffer by twice its current size via realloc and
1438 reset the pointers that pointed into the old block to point to the
1439 correct places in the new one. If extending the buffer results in it
1440 being larger than MAX_BUF_SIZE, then flag memory exhausted. */
1441 #define EXTEND_BUFFER() \
1443 unsigned char *old_buffer = bufp->buffer; \
1444 if (bufp->allocated == MAX_BUF_SIZE) \
1446 bufp->allocated <<= 1; \
1447 if (bufp->allocated > MAX_BUF_SIZE) \
1448 bufp->allocated = MAX_BUF_SIZE; \
1449 bufp->buffer = (unsigned char *) realloc (bufp->buffer, bufp->allocated);\
1450 if (bufp->buffer == NULL) \
1451 return REG_ESPACE; \
1452 /* If the buffer moved, move all the pointers into it. */ \
1453 if (old_buffer != bufp->buffer) \
1455 b = (b - old_buffer) + bufp->buffer; \
1456 begalt = (begalt - old_buffer) + bufp->buffer; \
1457 if (fixup_alt_jump) \
1458 fixup_alt_jump = (fixup_alt_jump - old_buffer) + bufp->buffer;\
1460 laststart = (laststart - old_buffer) + bufp->buffer; \
1461 if (pending_exact) \
1462 pending_exact = (pending_exact - old_buffer) + bufp->buffer; \
1467 /* Since we have one byte reserved for the register number argument to
1468 {start,stop}_memory, the maximum number of groups we can report
1469 things about is what fits in that byte. */
1470 #define MAX_REGNUM 255
1472 /* But patterns can have more than `MAX_REGNUM' registers. We just
1473 ignore the excess. */
1474 typedef unsigned regnum_t;
1477 /* Macros for the compile stack. */
1479 /* Since offsets can go either forwards or backwards, this type needs to
1480 be able to hold values from -(MAX_BUF_SIZE - 1) to MAX_BUF_SIZE - 1. */
1481 typedef int pattern_offset_t;
1485 pattern_offset_t begalt_offset;
1486 pattern_offset_t fixup_alt_jump;
1487 pattern_offset_t inner_group_offset;
1488 pattern_offset_t laststart_offset;
1490 } compile_stack_elt_t;
1495 compile_stack_elt_t *stack;
1497 unsigned avail; /* Offset of next open position. */
1498 } compile_stack_type;
1501 #define INIT_COMPILE_STACK_SIZE 32
1503 #define COMPILE_STACK_EMPTY (compile_stack.avail == 0)
1504 #define COMPILE_STACK_FULL (compile_stack.avail == compile_stack.size)
1506 /* The next available element. */
1507 #define COMPILE_STACK_TOP (compile_stack.stack[compile_stack.avail])
1510 /* Set the bit for character C in a list. */
1511 #define SET_LIST_BIT(c) \
1512 (b[((unsigned char) (c)) / BYTEWIDTH] \
1513 |= 1 << (((unsigned char) c) % BYTEWIDTH))
1516 /* Get the next unsigned number in the uncompiled pattern. */
1517 #define GET_UNSIGNED_NUMBER(num) \
1521 while (ISDIGIT (c)) \
1525 num = num * 10 + c - '0'; \
1533 #define CHAR_CLASS_MAX_LENGTH 6 /* Namely, `xdigit'. */
1535 #define IS_CHAR_CLASS(string) \
1536 (STREQ (string, "alpha") || STREQ (string, "upper") \
1537 || STREQ (string, "lower") || STREQ (string, "digit") \
1538 || STREQ (string, "alnum") || STREQ (string, "xdigit") \
1539 || STREQ (string, "space") || STREQ (string, "print") \
1540 || STREQ (string, "punct") || STREQ (string, "graph") \
1541 || STREQ (string, "cntrl") || STREQ (string, "blank"))
1543 #ifndef MATCH_MAY_ALLOCATE
1545 /* If we cannot allocate large objects within re_match_2_internal,
1546 we make the fail stack and register vectors global.
1547 The fail stack, we grow to the maximum size when a regexp
1549 The register vectors, we adjust in size each time we
1550 compile a regexp, according to the number of registers it needs. */
1552 static fail_stack_type fail_stack;
1554 /* Size with which the following vectors are currently allocated.
1555 That is so we can make them bigger as needed,
1556 but never make them smaller. */
1557 static int regs_allocated_size;
1559 static const char ** regstart, ** regend;
1560 static const char ** old_regstart, ** old_regend;
1561 static const char **best_regstart, **best_regend;
1562 static register_info_type *reg_info;
1563 static const char **reg_dummy;
1564 static register_info_type *reg_info_dummy;
1566 /* Make the register vectors big enough for NUM_REGS registers,
1567 but don't make them smaller. */
1570 regex_grow_registers (num_regs)
1573 if (num_regs > regs_allocated_size)
1575 RETALLOC_IF (regstart, num_regs, const char *);
1576 RETALLOC_IF (regend, num_regs, const char *);
1577 RETALLOC_IF (old_regstart, num_regs, const char *);
1578 RETALLOC_IF (old_regend, num_regs, const char *);
1579 RETALLOC_IF (best_regstart, num_regs, const char *);
1580 RETALLOC_IF (best_regend, num_regs, const char *);
1581 RETALLOC_IF (reg_info, num_regs, register_info_type);
1582 RETALLOC_IF (reg_dummy, num_regs, const char *);
1583 RETALLOC_IF (reg_info_dummy, num_regs, register_info_type);
1585 regs_allocated_size = num_regs;
1589 #endif /* not MATCH_MAY_ALLOCATE */
1591 /* `regex_compile' compiles PATTERN (of length SIZE) according to SYNTAX.
1592 Returns one of error codes defined in `regex.h', or zero for success.
1594 Assumes the `allocated' (and perhaps `buffer') and `translate'
1595 fields are set in BUFP on entry.
1597 If it succeeds, results are put in BUFP (if it returns an error, the
1598 contents of BUFP are undefined):
1599 `buffer' is the compiled pattern;
1600 `syntax' is set to SYNTAX;
1601 `used' is set to the length of the compiled pattern;
1602 `fastmap_accurate' is zero;
1603 `re_nsub' is the number of subexpressions in PATTERN;
1604 `not_bol' and `not_eol' are zero;
1606 The `fastmap' and `newline_anchor' fields are neither
1607 examined nor set. */
1609 /* Return, freeing storage we allocated. */
1610 #define FREE_STACK_RETURN(value) \
1611 return (free (compile_stack.stack), value)
1613 static reg_errcode_t
1614 regex_compile (pattern, size, syntax, bufp)
1615 const char *pattern;
1617 reg_syntax_t syntax;
1618 struct re_pattern_buffer *bufp;
1620 /* We fetch characters from PATTERN here. Even though PATTERN is
1621 `char *' (i.e., signed), we declare these variables as unsigned, so
1622 they can be reliably used as array indices. */
1623 register unsigned char c, c1;
1625 /* A random temporary spot in PATTERN. */
1628 /* Points to the end of the buffer, where we should append. */
1629 register unsigned char *b;
1631 /* Keeps track of unclosed groups. */
1632 compile_stack_type compile_stack;
1634 /* Points to the current (ending) position in the pattern. */
1635 const char *p = pattern;
1636 const char *pend = pattern + size;
1638 /* How to translate the characters in the pattern. */
1639 char *translate = bufp->translate;
1641 /* Address of the count-byte of the most recently inserted `exactn'
1642 command. This makes it possible to tell if a new exact-match
1643 character can be added to that command or if the character requires
1644 a new `exactn' command. */
1645 unsigned char *pending_exact = 0;
1647 /* Address of start of the most recently finished expression.
1648 This tells, e.g., postfix * where to find the start of its
1649 operand. Reset at the beginning of groups and alternatives. */
1650 unsigned char *laststart = 0;
1652 /* Address of beginning of regexp, or inside of last group. */
1653 unsigned char *begalt;
1655 /* Place in the uncompiled pattern (i.e., the {) to
1656 which to go back if the interval is invalid. */
1657 const char *beg_interval;
1659 /* Address of the place where a forward jump should go to the end of
1660 the containing expression. Each alternative of an `or' -- except the
1661 last -- ends with a forward jump of this sort. */
1662 unsigned char *fixup_alt_jump = 0;
1664 /* Counts open-groups as they are encountered. Remembered for the
1665 matching close-group on the compile stack, so the same register
1666 number is put in the stop_memory as the start_memory. */
1667 regnum_t regnum = 0;
1670 DEBUG_PRINT1 ("\nCompiling pattern: ");
1673 unsigned debug_count;
1675 for (debug_count = 0; debug_count < size; debug_count++)
1676 putchar (pattern[debug_count]);
1681 /* Initialize the compile stack. */
1682 compile_stack.stack = TALLOC (INIT_COMPILE_STACK_SIZE, compile_stack_elt_t);
1683 if (compile_stack.stack == NULL)
1686 compile_stack.size = INIT_COMPILE_STACK_SIZE;
1687 compile_stack.avail = 0;
1689 /* Initialize the pattern buffer. */
1690 bufp->syntax = syntax;
1691 bufp->fastmap_accurate = 0;
1692 bufp->not_bol = bufp->not_eol = 0;
1694 /* Set `used' to zero, so that if we return an error, the pattern
1695 printer (for debugging) will think there's no pattern. We reset it
1699 /* Always count groups, whether or not bufp->no_sub is set. */
1702 #if !defined (emacs) && !defined (SYNTAX_TABLE)
1703 /* Initialize the syntax table. */
1704 init_syntax_once ();
1707 if (bufp->allocated == 0)
1710 { /* If zero allocated, but buffer is non-null, try to realloc
1711 enough space. This loses if buffer's address is bogus, but
1712 that is the user's responsibility. */
1713 RETALLOC (bufp->buffer, INIT_BUF_SIZE, unsigned char);
1716 { /* Caller did not allocate a buffer. Do it for them. */
1717 bufp->buffer = TALLOC (INIT_BUF_SIZE, unsigned char);
1719 if (!bufp->buffer) FREE_STACK_RETURN (REG_ESPACE);
1721 bufp->allocated = INIT_BUF_SIZE;
1724 begalt = b = bufp->buffer;
1726 /* Loop through the uncompiled pattern until we're at the end. */
1735 if ( /* If at start of pattern, it's an operator. */
1737 /* If context independent, it's an operator. */
1738 || syntax & RE_CONTEXT_INDEP_ANCHORS
1739 /* Otherwise, depends on what's come before. */
1740 || at_begline_loc_p (pattern, p, syntax))
1750 if ( /* If at end of pattern, it's an operator. */
1752 /* If context independent, it's an operator. */
1753 || syntax & RE_CONTEXT_INDEP_ANCHORS
1754 /* Otherwise, depends on what's next. */
1755 || at_endline_loc_p (p, pend, syntax))
1765 if ((syntax & RE_BK_PLUS_QM)
1766 || (syntax & RE_LIMITED_OPS))
1770 /* If there is no previous pattern... */
1773 if (syntax & RE_CONTEXT_INVALID_OPS)
1774 FREE_STACK_RETURN (REG_BADRPT);
1775 else if (!(syntax & RE_CONTEXT_INDEP_OPS))
1780 /* Are we optimizing this jump? */
1781 boolean keep_string_p = false;
1783 /* 1 means zero (many) matches is allowed. */
1784 char zero_times_ok = 0, many_times_ok = 0;
1786 /* If there is a sequence of repetition chars, collapse it
1787 down to just one (the right one). We can't combine
1788 interval operators with these because of, e.g., `a{2}*',
1789 which should only match an even number of `a's. */
1793 zero_times_ok |= c != '+';
1794 many_times_ok |= c != '?';
1802 || (!(syntax & RE_BK_PLUS_QM) && (c == '+' || c == '?')))
1805 else if (syntax & RE_BK_PLUS_QM && c == '\\')
1807 if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
1810 if (!(c1 == '+' || c1 == '?'))
1825 /* If we get here, we found another repeat character. */
1828 /* Star, etc. applied to an empty pattern is equivalent
1829 to an empty pattern. */
1833 /* Now we know whether or not zero matches is allowed
1834 and also whether or not two or more matches is allowed. */
1836 { /* More than one repetition is allowed, so put in at the
1837 end a backward relative jump from `b' to before the next
1838 jump we're going to put in below (which jumps from
1839 laststart to after this jump).
1841 But if we are at the `*' in the exact sequence `.*\n',
1842 insert an unconditional jump backwards to the .,
1843 instead of the beginning of the loop. This way we only
1844 push a failure point once, instead of every time
1845 through the loop. */
1846 assert (p - 1 > pattern);
1848 /* Allocate the space for the jump. */
1849 GET_BUFFER_SPACE (3);
1851 /* We know we are not at the first character of the pattern,
1852 because laststart was nonzero. And we've already
1853 incremented `p', by the way, to be the character after
1854 the `*'. Do we have to do something analogous here
1855 for null bytes, because of RE_DOT_NOT_NULL? */
1856 if (TRANSLATE (*(p - 2)) == TRANSLATE ('.')
1858 && p < pend && TRANSLATE (*p) == TRANSLATE ('\n')
1859 && !(syntax & RE_DOT_NEWLINE))
1860 { /* We have .*\n. */
1861 STORE_JUMP (jump, b, laststart);
1862 keep_string_p = true;
1865 /* Anything else. */
1866 STORE_JUMP (maybe_pop_jump, b, laststart - 3);
1868 /* We've added more stuff to the buffer. */
1872 /* On failure, jump from laststart to b + 3, which will be the
1873 end of the buffer after this jump is inserted. */
1874 GET_BUFFER_SPACE (3);
1875 INSERT_JUMP (keep_string_p ? on_failure_keep_string_jump
1883 /* At least one repetition is required, so insert a
1884 `dummy_failure_jump' before the initial
1885 `on_failure_jump' instruction of the loop. This
1886 effects a skip over that instruction the first time
1887 we hit that loop. */
1888 GET_BUFFER_SPACE (3);
1889 INSERT_JUMP (dummy_failure_jump, laststart, laststart + 6);
1904 boolean had_char_class = false;
1906 if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
1908 /* Ensure that we have enough space to push a charset: the
1909 opcode, the length count, and the bitset; 34 bytes in all. */
1910 GET_BUFFER_SPACE (34);
1914 /* We test `*p == '^' twice, instead of using an if
1915 statement, so we only need one BUF_PUSH. */
1916 BUF_PUSH (*p == '^' ? charset_not : charset);
1920 /* Remember the first position in the bracket expression. */
1923 /* Push the number of bytes in the bitmap. */
1924 BUF_PUSH ((1 << BYTEWIDTH) / BYTEWIDTH);
1926 /* Clear the whole map. */
1927 bzero (b, (1 << BYTEWIDTH) / BYTEWIDTH);
1929 /* charset_not matches newline according to a syntax bit. */
1930 if ((re_opcode_t) b[-2] == charset_not
1931 && (syntax & RE_HAT_LISTS_NOT_NEWLINE))
1932 SET_LIST_BIT ('\n');
1934 /* Read in characters and ranges, setting map bits. */
1937 if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
1941 /* \ might escape characters inside [...] and [^...]. */
1942 if ((syntax & RE_BACKSLASH_ESCAPE_IN_LISTS) && c == '\\')
1944 if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
1951 /* Could be the end of the bracket expression. If it's
1952 not (i.e., when the bracket expression is `[]' so
1953 far), the ']' character bit gets set way below. */
1954 if (c == ']' && p != p1 + 1)
1957 /* Look ahead to see if it's a range when the last thing
1958 was a character class. */
1959 if (had_char_class && c == '-' && *p != ']')
1960 FREE_STACK_RETURN (REG_ERANGE);
1962 /* Look ahead to see if it's a range when the last thing
1963 was a character: if this is a hyphen not at the
1964 beginning or the end of a list, then it's the range
1967 && !(p - 2 >= pattern && p[-2] == '[')
1968 && !(p - 3 >= pattern && p[-3] == '[' && p[-2] == '^')
1972 = compile_range (&p, pend, translate, syntax, b);
1973 if (ret != REG_NOERROR) FREE_STACK_RETURN (ret);
1976 else if (p[0] == '-' && p[1] != ']')
1977 { /* This handles ranges made up of characters only. */
1980 /* Move past the `-'. */
1983 ret = compile_range (&p, pend, translate, syntax, b);
1984 if (ret != REG_NOERROR) FREE_STACK_RETURN (ret);
1987 /* See if we're at the beginning of a possible character
1990 else if (syntax & RE_CHAR_CLASSES && c == '[' && *p == ':')
1991 { /* Leave room for the null. */
1992 char str[CHAR_CLASS_MAX_LENGTH + 1];
1997 /* If pattern is `[[:'. */
1998 if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
2003 if (c == ':' || c == ']' || p == pend
2004 || c1 == CHAR_CLASS_MAX_LENGTH)
2010 /* If isn't a word bracketed by `[:' and:`]':
2011 undo the ending character, the letters, and leave
2012 the leading `:' and `[' (but set bits for them). */
2013 if (c == ':' && *p == ']')
2016 boolean is_alnum = STREQ (str, "alnum");
2017 boolean is_alpha = STREQ (str, "alpha");
2018 boolean is_blank = STREQ (str, "blank");
2019 boolean is_cntrl = STREQ (str, "cntrl");
2020 boolean is_digit = STREQ (str, "digit");
2021 boolean is_graph = STREQ (str, "graph");
2022 boolean is_lower = STREQ (str, "lower");
2023 boolean is_print = STREQ (str, "print");
2024 boolean is_punct = STREQ (str, "punct");
2025 boolean is_space = STREQ (str, "space");
2026 boolean is_upper = STREQ (str, "upper");
2027 boolean is_xdigit = STREQ (str, "xdigit");
2029 if (!IS_CHAR_CLASS (str))
2030 FREE_STACK_RETURN (REG_ECTYPE);
2032 /* Throw away the ] at the end of the character
2036 if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
2038 for (ch = 0; ch < 1 << BYTEWIDTH; ch++)
2040 /* This was split into 3 if's to
2041 avoid an arbitrary limit in some compiler. */
2042 if ( (is_alnum && ISALNUM (ch))
2043 || (is_alpha && ISALPHA (ch))
2044 || (is_blank && ISBLANK (ch))
2045 || (is_cntrl && ISCNTRL (ch)))
2047 if ( (is_digit && ISDIGIT (ch))
2048 || (is_graph && ISGRAPH (ch))
2049 || (is_lower && ISLOWER (ch))
2050 || (is_print && ISPRINT (ch)))
2052 if ( (is_punct && ISPUNCT (ch))
2053 || (is_space && ISSPACE (ch))
2054 || (is_upper && ISUPPER (ch))
2055 || (is_xdigit && ISXDIGIT (ch)))
2058 had_char_class = true;
2067 had_char_class = false;
2072 had_char_class = false;
2077 /* Discard any (non)matching list bytes that are all 0 at the
2078 end of the map. Decrease the map-length byte too. */
2079 while ((int) b[-1] > 0 && b[b[-1] - 1] == 0)
2087 if (syntax & RE_NO_BK_PARENS)
2094 if (syntax & RE_NO_BK_PARENS)
2101 if (syntax & RE_NEWLINE_ALT)
2108 if (syntax & RE_NO_BK_VBAR)
2115 if (syntax & RE_INTERVALS && syntax & RE_NO_BK_BRACES)
2116 goto handle_interval;
2122 if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
2124 /* Do not translate the character after the \, so that we can
2125 distinguish, e.g., \B from \b, even if we normally would
2126 translate, e.g., B to b. */
2132 if (syntax & RE_NO_BK_PARENS)
2133 goto normal_backslash;
2139 if (COMPILE_STACK_FULL)
2141 RETALLOC (compile_stack.stack, compile_stack.size << 1,
2142 compile_stack_elt_t);
2143 if (compile_stack.stack == NULL) return REG_ESPACE;
2145 compile_stack.size <<= 1;
2148 /* These are the values to restore when we hit end of this
2149 group. They are all relative offsets, so that if the
2150 whole pattern moves because of realloc, they will still
2152 COMPILE_STACK_TOP.begalt_offset = begalt - bufp->buffer;
2153 COMPILE_STACK_TOP.fixup_alt_jump
2154 = fixup_alt_jump ? fixup_alt_jump - bufp->buffer + 1 : 0;
2155 COMPILE_STACK_TOP.laststart_offset = b - bufp->buffer;
2156 COMPILE_STACK_TOP.regnum = regnum;
2158 /* We will eventually replace the 0 with the number of
2159 groups inner to this one. But do not push a
2160 start_memory for groups beyond the last one we can
2161 represent in the compiled pattern. */
2162 if (regnum <= MAX_REGNUM)
2164 COMPILE_STACK_TOP.inner_group_offset = b - bufp->buffer + 2;
2165 BUF_PUSH_3 (start_memory, regnum, 0);
2168 compile_stack.avail++;
2173 /* If we've reached MAX_REGNUM groups, then this open
2174 won't actually generate any code, so we'll have to
2175 clear pending_exact explicitly. */
2181 if (syntax & RE_NO_BK_PARENS) goto normal_backslash;
2183 if (COMPILE_STACK_EMPTY)
2184 if (syntax & RE_UNMATCHED_RIGHT_PAREN_ORD)
2185 goto normal_backslash;
2187 FREE_STACK_RETURN (REG_ERPAREN);
2191 { /* Push a dummy failure point at the end of the
2192 alternative for a possible future
2193 `pop_failure_jump' to pop. See comments at
2194 `push_dummy_failure' in `re_match_2'. */
2195 BUF_PUSH (push_dummy_failure);
2197 /* We allocated space for this jump when we assigned
2198 to `fixup_alt_jump', in the `handle_alt' case below. */
2199 STORE_JUMP (jump_past_alt, fixup_alt_jump, b - 1);
2202 /* See similar code for backslashed left paren above. */
2203 if (COMPILE_STACK_EMPTY)
2204 if (syntax & RE_UNMATCHED_RIGHT_PAREN_ORD)
2207 FREE_STACK_RETURN (REG_ERPAREN);
2209 /* Since we just checked for an empty stack above, this
2210 ``can't happen''. */
2211 assert (compile_stack.avail != 0);
2213 /* We don't just want to restore into `regnum', because
2214 later groups should continue to be numbered higher,
2215 as in `(ab)c(de)' -- the second group is #2. */
2216 regnum_t this_group_regnum;
2218 compile_stack.avail--;
2219 begalt = bufp->buffer + COMPILE_STACK_TOP.begalt_offset;
2221 = COMPILE_STACK_TOP.fixup_alt_jump
2222 ? bufp->buffer + COMPILE_STACK_TOP.fixup_alt_jump - 1
2224 laststart = bufp->buffer + COMPILE_STACK_TOP.laststart_offset;
2225 this_group_regnum = COMPILE_STACK_TOP.regnum;
2226 /* If we've reached MAX_REGNUM groups, then this open
2227 won't actually generate any code, so we'll have to
2228 clear pending_exact explicitly. */
2231 /* We're at the end of the group, so now we know how many
2232 groups were inside this one. */
2233 if (this_group_regnum <= MAX_REGNUM)
2235 unsigned char *inner_group_loc
2236 = bufp->buffer + COMPILE_STACK_TOP.inner_group_offset;
2238 *inner_group_loc = regnum - this_group_regnum;
2239 BUF_PUSH_3 (stop_memory, this_group_regnum,
2240 regnum - this_group_regnum);
2246 case '|': /* `\|'. */
2247 if (syntax & RE_LIMITED_OPS || syntax & RE_NO_BK_VBAR)
2248 goto normal_backslash;
2250 if (syntax & RE_LIMITED_OPS)
2253 /* Insert before the previous alternative a jump which
2254 jumps to this alternative if the former fails. */
2255 GET_BUFFER_SPACE (3);
2256 INSERT_JUMP (on_failure_jump, begalt, b + 6);
2260 /* The alternative before this one has a jump after it
2261 which gets executed if it gets matched. Adjust that
2262 jump so it will jump to this alternative's analogous
2263 jump (put in below, which in turn will jump to the next
2264 (if any) alternative's such jump, etc.). The last such
2265 jump jumps to the correct final destination. A picture:
2271 If we are at `b', then fixup_alt_jump right now points to a
2272 three-byte space after `a'. We'll put in the jump, set
2273 fixup_alt_jump to right after `b', and leave behind three
2274 bytes which we'll fill in when we get to after `c'. */
2277 STORE_JUMP (jump_past_alt, fixup_alt_jump, b);
2279 /* Mark and leave space for a jump after this alternative,
2280 to be filled in later either by next alternative or
2281 when know we're at the end of a series of alternatives. */
2283 GET_BUFFER_SPACE (3);
2292 /* If \{ is a literal. */
2293 if (!(syntax & RE_INTERVALS)
2294 /* If we're at `\{' and it's not the open-interval
2296 || ((syntax & RE_INTERVALS) && (syntax & RE_NO_BK_BRACES))
2297 || (p - 2 == pattern && p == pend))
2298 goto normal_backslash;
2302 /* If got here, then the syntax allows intervals. */
2304 /* At least (most) this many matches must be made. */
2305 int lower_bound = -1, upper_bound = -1;
2307 beg_interval = p - 1;
2311 if (syntax & RE_NO_BK_BRACES)
2312 goto unfetch_interval;
2314 FREE_STACK_RETURN (REG_EBRACE);
2317 GET_UNSIGNED_NUMBER (lower_bound);
2321 GET_UNSIGNED_NUMBER (upper_bound);
2322 if (upper_bound < 0) upper_bound = RE_DUP_MAX;
2325 /* Interval such as `{1}' => match exactly once. */
2326 upper_bound = lower_bound;
2328 if (lower_bound < 0 || upper_bound > RE_DUP_MAX
2329 || lower_bound > upper_bound)
2331 if (syntax & RE_NO_BK_BRACES)
2332 goto unfetch_interval;
2334 FREE_STACK_RETURN (REG_BADBR);
2337 if (!(syntax & RE_NO_BK_BRACES))
2339 if (c != '\\') FREE_STACK_RETURN (REG_EBRACE);
2346 if (syntax & RE_NO_BK_BRACES)
2347 goto unfetch_interval;
2349 FREE_STACK_RETURN (REG_BADBR);
2352 /* We just parsed a valid interval. */
2354 /* If it's invalid to have no preceding re. */
2357 if (syntax & RE_CONTEXT_INVALID_OPS)
2358 FREE_STACK_RETURN (REG_BADRPT);
2359 else if (syntax & RE_CONTEXT_INDEP_OPS)
2362 goto unfetch_interval;
2365 /* If the upper bound is zero, don't want to succeed at
2366 all; jump from `laststart' to `b + 3', which will be
2367 the end of the buffer after we insert the jump. */
2368 if (upper_bound == 0)
2370 GET_BUFFER_SPACE (3);
2371 INSERT_JUMP (jump, laststart, b + 3);
2375 /* Otherwise, we have a nontrivial interval. When
2376 we're all done, the pattern will look like:
2377 set_number_at <jump count> <upper bound>
2378 set_number_at <succeed_n count> <lower bound>
2379 succeed_n <after jump addr> <succeed_n count>
2381 jump_n <succeed_n addr> <jump count>
2382 (The upper bound and `jump_n' are omitted if
2383 `upper_bound' is 1, though.) */
2385 { /* If the upper bound is > 1, we need to insert
2386 more at the end of the loop. */
2387 unsigned nbytes = 10 + (upper_bound > 1) * 10;
2389 GET_BUFFER_SPACE (nbytes);
2391 /* Initialize lower bound of the `succeed_n', even
2392 though it will be set during matching by its
2393 attendant `set_number_at' (inserted next),
2394 because `re_compile_fastmap' needs to know.
2395 Jump to the `jump_n' we might insert below. */
2396 INSERT_JUMP2 (succeed_n, laststart,
2397 b + 5 + (upper_bound > 1) * 5,
2401 /* Code to initialize the lower bound. Insert
2402 before the `succeed_n'. The `5' is the last two
2403 bytes of this `set_number_at', plus 3 bytes of
2404 the following `succeed_n'. */
2405 insert_op2 (set_number_at, laststart, 5, lower_bound, b);
2408 if (upper_bound > 1)
2409 { /* More than one repetition is allowed, so
2410 append a backward jump to the `succeed_n'
2411 that starts this interval.
2413 When we've reached this during matching,
2414 we'll have matched the interval once, so
2415 jump back only `upper_bound - 1' times. */
2416 STORE_JUMP2 (jump_n, b, laststart + 5,
2420 /* The location we want to set is the second
2421 parameter of the `jump_n'; that is `b-2' as
2422 an absolute address. `laststart' will be
2423 the `set_number_at' we're about to insert;
2424 `laststart+3' the number to set, the source
2425 for the relative address. But we are
2426 inserting into the middle of the pattern --
2427 so everything is getting moved up by 5.
2428 Conclusion: (b - 2) - (laststart + 3) + 5,
2429 i.e., b - laststart.
2431 We insert this at the beginning of the loop
2432 so that if we fail during matching, we'll
2433 reinitialize the bounds. */
2434 insert_op2 (set_number_at, laststart, b - laststart,
2435 upper_bound - 1, b);
2440 beg_interval = NULL;
2445 /* If an invalid interval, match the characters as literals. */
2446 assert (beg_interval);
2448 beg_interval = NULL;
2450 /* normal_char and normal_backslash need `c'. */
2453 if (!(syntax & RE_NO_BK_BRACES))
2455 if (p > pattern && p[-1] == '\\')
2456 goto normal_backslash;
2461 /* There is no way to specify the before_dot and after_dot
2462 operators. rms says this is ok. --karl */
2470 BUF_PUSH_2 (syntaxspec, syntax_spec_code[c]);
2476 BUF_PUSH_2 (notsyntaxspec, syntax_spec_code[c]);
2483 BUF_PUSH (wordchar);
2489 BUF_PUSH (notwordchar);
2502 BUF_PUSH (wordbound);
2506 BUF_PUSH (notwordbound);
2517 case '1': case '2': case '3': case '4': case '5':
2518 case '6': case '7': case '8': case '9':
2519 if (syntax & RE_NO_BK_REFS)
2525 FREE_STACK_RETURN (REG_ESUBREG);
2527 /* Can't back reference to a subexpression if inside of it. */
2528 if (group_in_compile_stack (compile_stack, c1))
2532 BUF_PUSH_2 (duplicate, c1);
2538 if (syntax & RE_BK_PLUS_QM)
2541 goto normal_backslash;
2545 /* You might think it would be useful for \ to mean
2546 not to translate; but if we don't translate it
2547 it will never match anything. */
2555 /* Expects the character in `c'. */
2557 /* If no exactn currently being built. */
2560 /* If last exactn not at current position. */
2561 || pending_exact + *pending_exact + 1 != b
2563 /* We have only one byte following the exactn for the count. */
2564 || *pending_exact == (1 << BYTEWIDTH) - 1
2566 /* If followed by a repetition operator. */
2567 || *p == '*' || *p == '^'
2568 || ((syntax & RE_BK_PLUS_QM)
2569 ? *p == '\\' && (p[1] == '+' || p[1] == '?')
2570 : (*p == '+' || *p == '?'))
2571 || ((syntax & RE_INTERVALS)
2572 && ((syntax & RE_NO_BK_BRACES)
2574 : (p[0] == '\\' && p[1] == '{'))))
2576 /* Start building a new exactn. */
2580 BUF_PUSH_2 (exactn, 0);
2581 pending_exact = b - 1;
2588 } /* while p != pend */
2591 /* Through the pattern now. */
2594 STORE_JUMP (jump_past_alt, fixup_alt_jump, b);
2596 if (!COMPILE_STACK_EMPTY)
2597 FREE_STACK_RETURN (REG_EPAREN);
2599 /* If we don't want backtracking, force success
2600 the first time we reach the end of the compiled pattern. */
2601 if (syntax & RE_NO_POSIX_BACKTRACKING)
2604 free (compile_stack.stack);
2606 /* We have succeeded; set the length of the buffer. */
2607 bufp->used = b - bufp->buffer;
2612 DEBUG_PRINT1 ("\nCompiled pattern: \n");
2613 print_compiled_pattern (bufp);
2617 #ifndef MATCH_MAY_ALLOCATE
2618 /* Initialize the failure stack to the largest possible stack. This
2619 isn't necessary unless we're trying to avoid calling alloca in
2620 the search and match routines. */
2622 int num_regs = bufp->re_nsub + 1;
2624 /* Since DOUBLE_FAIL_STACK refuses to double only if the current size
2625 is strictly greater than re_max_failures, the largest possible stack
2626 is 2 * re_max_failures failure points. */
2627 if (fail_stack.size < (2 * re_max_failures * MAX_FAILURE_ITEMS))
2629 fail_stack.size = (2 * re_max_failures * MAX_FAILURE_ITEMS);
2632 if (! fail_stack.stack)
2634 = (fail_stack_elt_t *) xmalloc (fail_stack.size
2635 * sizeof (fail_stack_elt_t));
2638 = (fail_stack_elt_t *) xrealloc (fail_stack.stack,
2640 * sizeof (fail_stack_elt_t)));
2641 #else /* not emacs */
2642 if (! fail_stack.stack)
2644 = (fail_stack_elt_t *) malloc (fail_stack.size
2645 * sizeof (fail_stack_elt_t));
2648 = (fail_stack_elt_t *) realloc (fail_stack.stack,
2650 * sizeof (fail_stack_elt_t)));
2651 #endif /* not emacs */
2654 regex_grow_registers (num_regs);
2656 #endif /* not MATCH_MAY_ALLOCATE */
2659 } /* regex_compile */
2661 /* Subroutines for `regex_compile'. */
2663 /* Store OP at LOC followed by two-byte integer parameter ARG. */
2666 store_op1 (op, loc, arg)
2671 *loc = (unsigned char) op;
2672 STORE_NUMBER (loc + 1, arg);
2676 /* Like `store_op1', but for two two-byte parameters ARG1 and ARG2. */
2679 store_op2 (op, loc, arg1, arg2)
2684 *loc = (unsigned char) op;
2685 STORE_NUMBER (loc + 1, arg1);
2686 STORE_NUMBER (loc + 3, arg2);
2690 /* Copy the bytes from LOC to END to open up three bytes of space at LOC
2691 for OP followed by two-byte integer parameter ARG. */
2694 insert_op1 (op, loc, arg, end)
2700 register unsigned char *pfrom = end;
2701 register unsigned char *pto = end + 3;
2703 while (pfrom != loc)
2706 store_op1 (op, loc, arg);
2710 /* Like `insert_op1', but for two two-byte parameters ARG1 and ARG2. */
2713 insert_op2 (op, loc, arg1, arg2, end)
2719 register unsigned char *pfrom = end;
2720 register unsigned char *pto = end + 5;
2722 while (pfrom != loc)
2725 store_op2 (op, loc, arg1, arg2);
2729 /* P points to just after a ^ in PATTERN. Return true if that ^ comes
2730 after an alternative or a begin-subexpression. We assume there is at
2731 least one character before the ^. */
2734 at_begline_loc_p (pattern, p, syntax)
2735 const char *pattern, *p;
2736 reg_syntax_t syntax;
2738 const char *prev = p - 2;
2739 boolean prev_prev_backslash = prev > pattern && prev[-1] == '\\';
2742 /* After a subexpression? */
2743 (*prev == '(' && (syntax & RE_NO_BK_PARENS || prev_prev_backslash))
2744 /* After an alternative? */
2745 || (*prev == '|' && (syntax & RE_NO_BK_VBAR || prev_prev_backslash));
2749 /* The dual of at_begline_loc_p. This one is for $. We assume there is
2750 at least one character after the $, i.e., `P < PEND'. */
2753 at_endline_loc_p (p, pend, syntax)
2754 const char *p, *pend;
2757 const char *next = p;
2758 boolean next_backslash = *next == '\\';
2759 const char *next_next = p + 1 < pend ? p + 1 : NULL;
2762 /* Before a subexpression? */
2763 (syntax & RE_NO_BK_PARENS ? *next == ')'
2764 : next_backslash && next_next && *next_next == ')')
2765 /* Before an alternative? */
2766 || (syntax & RE_NO_BK_VBAR ? *next == '|'
2767 : next_backslash && next_next && *next_next == '|');
2771 /* Returns true if REGNUM is in one of COMPILE_STACK's elements and
2772 false if it's not. */
2775 group_in_compile_stack (compile_stack, regnum)
2776 compile_stack_type compile_stack;
2781 for (this_element = compile_stack.avail - 1;
2784 if (compile_stack.stack[this_element].regnum == regnum)
2791 /* Read the ending character of a range (in a bracket expression) from the
2792 uncompiled pattern *P_PTR (which ends at PEND). We assume the
2793 starting character is in `P[-2]'. (`P[-1]' is the character `-'.)
2794 Then we set the translation of all bits between the starting and
2795 ending characters (inclusive) in the compiled pattern B.
2797 Return an error code.
2799 We use these short variable names so we can use the same macros as
2800 `regex_compile' itself. */
2802 static reg_errcode_t
2803 compile_range (p_ptr, pend, translate, syntax, b)
2804 const char **p_ptr, *pend;
2806 reg_syntax_t syntax;
2811 const char *p = *p_ptr;
2812 int range_start, range_end;
2817 /* Even though the pattern is a signed `char *', we need to fetch
2818 with unsigned char *'s; if the high bit of the pattern character
2819 is set, the range endpoints will be negative if we fetch using a
2822 We also want to fetch the endpoints without translating them; the
2823 appropriate translation is done in the bit-setting loop below. */
2824 /* The SVR4 compiler on the 3B2 had trouble with unsigned const char *. */
2825 range_start = ((const unsigned char *) p)[-2];
2826 range_end = ((const unsigned char *) p)[0];
2828 /* Have to increment the pointer into the pattern string, so the
2829 caller isn't still at the ending character. */
2832 /* If the start is after the end, the range is empty. */
2833 if (range_start > range_end)
2834 return syntax & RE_NO_EMPTY_RANGES ? REG_ERANGE : REG_NOERROR;
2836 /* Here we see why `this_char' has to be larger than an `unsigned
2837 char' -- the range is inclusive, so if `range_end' == 0xff
2838 (assuming 8-bit characters), we would otherwise go into an infinite
2839 loop, since all characters <= 0xff. */
2840 for (this_char = range_start; this_char <= range_end; this_char++)
2842 SET_LIST_BIT (TRANSLATE (this_char));
2848 /* re_compile_fastmap computes a ``fastmap'' for the compiled pattern in
2849 BUFP. A fastmap records which of the (1 << BYTEWIDTH) possible
2850 characters can start a string that matches the pattern. This fastmap
2851 is used by re_search to skip quickly over impossible starting points.
2853 The caller must supply the address of a (1 << BYTEWIDTH)-byte data
2854 area as BUFP->fastmap.
2856 We set the `fastmap', `fastmap_accurate', and `can_be_null' fields in
2859 Returns 0 if we succeed, -2 if an internal error. */
2862 re_compile_fastmap (bufp)
2863 struct re_pattern_buffer *bufp;
2866 #ifdef MATCH_MAY_ALLOCATE
2867 fail_stack_type fail_stack;
2869 #ifndef REGEX_MALLOC
2872 /* We don't push any register information onto the failure stack. */
2873 unsigned num_regs = 0;
2875 register char *fastmap = bufp->fastmap;
2876 unsigned char *pattern = bufp->buffer;
2877 unsigned long size = bufp->used;
2878 unsigned char *p = pattern;
2879 register unsigned char *pend = pattern + size;
2881 /* This holds the pointer to the failure stack, when
2882 it is allocated relocatably. */
2883 fail_stack_elt_t *failure_stack_ptr;
2885 /* Assume that each path through the pattern can be null until
2886 proven otherwise. We set this false at the bottom of switch
2887 statement, to which we get only if a particular path doesn't
2888 match the empty string. */
2889 boolean path_can_be_null = true;
2891 /* We aren't doing a `succeed_n' to begin with. */
2892 boolean succeed_n_p = false;
2894 assert (fastmap != NULL && p != NULL);
2897 bzero (fastmap, 1 << BYTEWIDTH); /* Assume nothing's valid. */
2898 bufp->fastmap_accurate = 1; /* It will be when we're done. */
2899 bufp->can_be_null = 0;
2903 if (p == pend || *p == succeed)
2905 /* We have reached the (effective) end of pattern. */
2906 if (!FAIL_STACK_EMPTY ())
2908 bufp->can_be_null |= path_can_be_null;
2910 /* Reset for next path. */
2911 path_can_be_null = true;
2913 p = fail_stack.stack[--fail_stack.avail].pointer;
2921 /* We should never be about to go beyond the end of the pattern. */
2924 switch (SWITCH_ENUM_CAST ((re_opcode_t) *p++))
2927 /* I guess the idea here is to simply not bother with a fastmap
2928 if a backreference is used, since it's too hard to figure out
2929 the fastmap for the corresponding group. Setting
2930 `can_be_null' stops `re_search_2' from using the fastmap, so
2931 that is all we do. */
2933 bufp->can_be_null = 1;
2937 /* Following are the cases which match a character. These end
2946 for (j = *p++ * BYTEWIDTH - 1; j >= 0; j--)
2947 if (p[j / BYTEWIDTH] & (1 << (j % BYTEWIDTH)))
2953 /* Chars beyond end of map must be allowed. */
2954 for (j = *p * BYTEWIDTH; j < (1 << BYTEWIDTH); j++)
2957 for (j = *p++ * BYTEWIDTH - 1; j >= 0; j--)
2958 if (!(p[j / BYTEWIDTH] & (1 << (j % BYTEWIDTH))))
2964 for (j = 0; j < (1 << BYTEWIDTH); j++)
2965 if (SYNTAX (j) == Sword)
2971 for (j = 0; j < (1 << BYTEWIDTH); j++)
2972 if (SYNTAX (j) != Sword)
2979 int fastmap_newline = fastmap['\n'];
2981 /* `.' matches anything ... */
2982 for (j = 0; j < (1 << BYTEWIDTH); j++)
2985 /* ... except perhaps newline. */
2986 if (!(bufp->syntax & RE_DOT_NEWLINE))
2987 fastmap['\n'] = fastmap_newline;
2989 /* Return if we have already set `can_be_null'; if we have,
2990 then the fastmap is irrelevant. Something's wrong here. */
2991 else if (bufp->can_be_null)
2994 /* Otherwise, have to check alternative paths. */
3001 for (j = 0; j < (1 << BYTEWIDTH); j++)
3002 if (SYNTAX (j) == (enum syntaxcode) k)
3009 for (j = 0; j < (1 << BYTEWIDTH); j++)
3010 if (SYNTAX (j) != (enum syntaxcode) k)
3015 /* All cases after this match the empty string. These end with
3023 #endif /* not emacs */
3035 case push_dummy_failure:
3040 case pop_failure_jump:
3041 case maybe_pop_jump:
3044 case dummy_failure_jump:
3045 EXTRACT_NUMBER_AND_INCR (j, p);
3050 /* Jump backward implies we just went through the body of a
3051 loop and matched nothing. Opcode jumped to should be
3052 `on_failure_jump' or `succeed_n'. Just treat it like an
3053 ordinary jump. For a * loop, it has pushed its failure
3054 point already; if so, discard that as redundant. */
3055 if ((re_opcode_t) *p != on_failure_jump
3056 && (re_opcode_t) *p != succeed_n)
3060 EXTRACT_NUMBER_AND_INCR (j, p);
3063 /* If what's on the stack is where we are now, pop it. */
3064 if (!FAIL_STACK_EMPTY ()
3065 && fail_stack.stack[fail_stack.avail - 1].pointer == p)
3071 case on_failure_jump:
3072 case on_failure_keep_string_jump:
3073 handle_on_failure_jump:
3074 EXTRACT_NUMBER_AND_INCR (j, p);
3076 /* For some patterns, e.g., `(a?)?', `p+j' here points to the
3077 end of the pattern. We don't want to push such a point,
3078 since when we restore it above, entering the switch will
3079 increment `p' past the end of the pattern. We don't need
3080 to push such a point since we obviously won't find any more
3081 fastmap entries beyond `pend'. Such a pattern can match
3082 the null string, though. */
3085 if (!PUSH_PATTERN_OP (p + j, fail_stack))
3087 RESET_FAIL_STACK ();
3092 bufp->can_be_null = 1;
3096 EXTRACT_NUMBER_AND_INCR (k, p); /* Skip the n. */
3097 succeed_n_p = false;
3104 /* Get to the number of times to succeed. */
3107 /* Increment p past the n for when k != 0. */
3108 EXTRACT_NUMBER_AND_INCR (k, p);
3112 succeed_n_p = true; /* Spaghetti code alert. */
3113 goto handle_on_failure_jump;
3130 abort (); /* We have listed all the cases. */
3133 /* Getting here means we have found the possible starting
3134 characters for one path of the pattern -- and that the empty
3135 string does not match. We need not follow this path further.
3136 Instead, look at the next alternative (remembered on the
3137 stack), or quit if no more. The test at the top of the loop
3138 does these things. */
3139 path_can_be_null = false;
3143 /* Set `can_be_null' for the last path (also the first path, if the
3144 pattern is empty). */
3145 bufp->can_be_null |= path_can_be_null;
3148 RESET_FAIL_STACK ();
3150 } /* re_compile_fastmap */
3152 /* Set REGS to hold NUM_REGS registers, storing them in STARTS and
3153 ENDS. Subsequent matches using PATTERN_BUFFER and REGS will use
3154 this memory for recording register information. STARTS and ENDS
3155 must be allocated using the malloc library routine, and must each
3156 be at least NUM_REGS * sizeof (regoff_t) bytes long.
3158 If NUM_REGS == 0, then subsequent matches should allocate their own
3161 Unless this function is called, the first search or match using
3162 PATTERN_BUFFER will allocate its own register data, without
3163 freeing the old data. */
3166 re_set_registers (bufp, regs, num_regs, starts, ends)
3167 struct re_pattern_buffer *bufp;
3168 struct re_registers *regs;
3170 regoff_t *starts, *ends;
3174 bufp->regs_allocated = REGS_REALLOCATE;
3175 regs->num_regs = num_regs;
3176 regs->start = starts;
3181 bufp->regs_allocated = REGS_UNALLOCATED;
3183 regs->start = regs->end = (regoff_t *) 0;
3187 /* Searching routines. */
3189 /* Like re_search_2, below, but only one string is specified, and
3190 doesn't let you say where to stop matching. */
3193 re_search (bufp, string, size, startpos, range, regs)
3194 struct re_pattern_buffer *bufp;
3196 int size, startpos, range;
3197 struct re_registers *regs;
3199 return re_search_2 (bufp, NULL, 0, string, size, startpos, range,
3204 /* Using the compiled pattern in BUFP->buffer, first tries to match the
3205 virtual concatenation of STRING1 and STRING2, starting first at index
3206 STARTPOS, then at STARTPOS + 1, and so on.
3208 STRING1 and STRING2 have length SIZE1 and SIZE2, respectively.
3210 RANGE is how far to scan while trying to match. RANGE = 0 means try
3211 only at STARTPOS; in general, the last start tried is STARTPOS +
3214 In REGS, return the indices of the virtual concatenation of STRING1
3215 and STRING2 that matched the entire BUFP->buffer and its contained
3218 Do not consider matching one past the index STOP in the virtual
3219 concatenation of STRING1 and STRING2.
3221 We return either the position in the strings at which the match was
3222 found, -1 if no match, or -2 if error (such as failure
3226 re_search_2 (bufp, string1, size1, string2, size2, startpos, range, regs, stop)
3227 struct re_pattern_buffer *bufp;
3228 const char *string1, *string2;
3232 struct re_registers *regs;
3236 register char *fastmap = bufp->fastmap;
3237 register char *translate = bufp->translate;
3238 int total_size = size1 + size2;
3239 int endpos = startpos + range;
3241 /* Check for out-of-range STARTPOS. */
3242 if (startpos < 0 || startpos > total_size)
3245 /* Fix up RANGE if it might eventually take us outside
3246 the virtual concatenation of STRING1 and STRING2. */
3248 range = -1 - startpos;
3249 else if (endpos > total_size)
3250 range = total_size - startpos;
3252 /* If the search isn't to be a backwards one, don't waste time in a
3253 search for a pattern that must be anchored. */
3254 if (bufp->used > 0 && (re_opcode_t) bufp->buffer[0] == begbuf && range > 0)
3262 /* Update the fastmap now if not correct already. */
3263 if (fastmap && !bufp->fastmap_accurate)
3264 if (re_compile_fastmap (bufp) == -2)
3267 /* Loop through the string, looking for a place to start matching. */
3270 /* If a fastmap is supplied, skip quickly over characters that
3271 cannot be the start of a match. If the pattern can match the
3272 null string, however, we don't need to skip characters; we want
3273 the first null string. */
3274 if (fastmap && startpos < total_size && !bufp->can_be_null)
3276 if (range > 0) /* Searching forwards. */
3278 register const char *d;
3279 register int lim = 0;
3282 if (startpos < size1 && startpos + range >= size1)
3283 lim = range - (size1 - startpos);
3285 d = (startpos >= size1 ? string2 - size1 : string1) + startpos;
3287 /* Written out as an if-else to avoid testing `translate'
3291 && !fastmap[(unsigned char)
3292 translate[(unsigned char) *d++]])
3295 while (range > lim && !fastmap[(unsigned char) *d++])
3298 startpos += irange - range;
3300 else /* Searching backwards. */
3302 register char c = (size1 == 0 || startpos >= size1
3303 ? string2[startpos - size1]
3304 : string1[startpos]);
3306 if (!fastmap[(unsigned char) TRANSLATE (c)])
3311 /* If can't match the null string, and that's all we have left, fail. */
3312 if (range >= 0 && startpos == total_size && fastmap
3313 && !bufp->can_be_null)
3316 val = re_match_2_internal (bufp, string1, size1, string2, size2,
3317 startpos, regs, stop);
3318 #ifndef REGEX_MALLOC
3347 /* Declarations and macros for re_match_2. */
3349 static int bcmp_translate ();
3350 static boolean alt_match_null_string_p (),
3351 common_op_match_null_string_p (),
3352 group_match_null_string_p ();
3354 /* This converts PTR, a pointer into one of the search strings `string1'
3355 and `string2' into an offset from the beginning of that string. */
3356 #define POINTER_TO_OFFSET(ptr) \
3357 (FIRST_STRING_P (ptr) \
3358 ? ((regoff_t) ((ptr) - string1)) \
3359 : ((regoff_t) ((ptr) - string2 + size1)))
3361 /* Macros for dealing with the split strings in re_match_2. */
3363 #define MATCHING_IN_FIRST_STRING (dend == end_match_1)
3365 /* Call before fetching a character with *d. This switches over to
3366 string2 if necessary. */
3367 #define PREFETCH() \
3370 /* End of string2 => fail. */ \
3371 if (dend == end_match_2) \
3373 /* End of string1 => advance to string2. */ \
3375 dend = end_match_2; \
3379 /* Test if at very beginning or at very end of the virtual concatenation
3380 of `string1' and `string2'. If only one string, it's `string2'. */
3381 #define AT_STRINGS_BEG(d) ((d) == (size1 ? string1 : string2) || !size2)
3382 #define AT_STRINGS_END(d) ((d) == end2)
3385 /* Test if D points to a character which is word-constituent. We have
3386 two special cases to check for: if past the end of string1, look at
3387 the first character in string2; and if before the beginning of
3388 string2, look at the last character in string1. */
3389 #define WORDCHAR_P(d) \
3390 (SYNTAX ((d) == end1 ? *string2 \
3391 : (d) == string2 - 1 ? *(end1 - 1) : *(d)) \
3394 /* Test if the character before D and the one at D differ with respect
3395 to being word-constituent. */
3396 #define AT_WORD_BOUNDARY(d) \
3397 (AT_STRINGS_BEG (d) || AT_STRINGS_END (d) \
3398 || WORDCHAR_P (d - 1) != WORDCHAR_P (d))
3401 /* Free everything we malloc. */
3402 #ifdef MATCH_MAY_ALLOCATE
3403 #define FREE_VAR(var) if (var) REGEX_FREE (var); var = NULL
3404 #define FREE_VARIABLES() \
3406 REGEX_FREE_STACK (fail_stack.stack); \
3407 FREE_VAR (regstart); \
3408 FREE_VAR (regend); \
3409 FREE_VAR (old_regstart); \
3410 FREE_VAR (old_regend); \
3411 FREE_VAR (best_regstart); \
3412 FREE_VAR (best_regend); \
3413 FREE_VAR (reg_info); \
3414 FREE_VAR (reg_dummy); \
3415 FREE_VAR (reg_info_dummy); \
3418 #define FREE_VARIABLES() ((void)0) /* Do nothing! But inhibit gcc warning. */
3419 #endif /* not MATCH_MAY_ALLOCATE */
3421 /* These values must meet several constraints. They must not be valid
3422 register values; since we have a limit of 255 registers (because
3423 we use only one byte in the pattern for the register number), we can
3424 use numbers larger than 255. They must differ by 1, because of
3425 NUM_FAILURE_ITEMS above. And the value for the lowest register must
3426 be larger than the value for the highest register, so we do not try
3427 to actually save any registers when none are active. */
3428 #define NO_HIGHEST_ACTIVE_REG (1 << BYTEWIDTH)
3429 #define NO_LOWEST_ACTIVE_REG (NO_HIGHEST_ACTIVE_REG + 1)
3431 /* Matching routines. */
3433 #ifndef emacs /* Emacs never uses this. */
3434 /* re_match is like re_match_2 except it takes only a single string. */
3437 re_match (bufp, string, size, pos, regs)
3438 struct re_pattern_buffer *bufp;
3441 struct re_registers *regs;
3443 int result = re_match_2_internal (bufp, NULL, 0, string, size,
3448 #endif /* not emacs */
3451 /* re_match_2 matches the compiled pattern in BUFP against the
3452 the (virtual) concatenation of STRING1 and STRING2 (of length SIZE1
3453 and SIZE2, respectively). We start matching at POS, and stop
3456 If REGS is non-null and the `no_sub' field of BUFP is nonzero, we
3457 store offsets for the substring each group matched in REGS. See the
3458 documentation for exactly how many groups we fill.
3460 We return -1 if no match, -2 if an internal error (such as the
3461 failure stack overflowing). Otherwise, we return the length of the
3462 matched substring. */
3465 re_match_2 (bufp, string1, size1, string2, size2, pos, regs, stop)
3466 struct re_pattern_buffer *bufp;
3467 const char *string1, *string2;
3470 struct re_registers *regs;
3473 int result = re_match_2_internal (bufp, string1, size1, string2, size2,
3479 /* This is a separate function so that we can force an alloca cleanup
3482 re_match_2_internal (bufp, string1, size1, string2, size2, pos, regs, stop)
3483 struct re_pattern_buffer *bufp;
3484 const char *string1, *string2;
3487 struct re_registers *regs;
3490 /* General temporaries. */
3494 /* Just past the end of the corresponding string. */
3495 const char *end1, *end2;
3497 /* Pointers into string1 and string2, just past the last characters in
3498 each to consider matching. */
3499 const char *end_match_1, *end_match_2;
3501 /* Where we are in the data, and the end of the current string. */
3502 const char *d, *dend;
3504 /* Where we are in the pattern, and the end of the pattern. */
3505 unsigned char *p = bufp->buffer;
3506 register unsigned char *pend = p + bufp->used;
3508 /* Mark the opcode just after a start_memory, so we can test for an
3509 empty subpattern when we get to the stop_memory. */
3510 unsigned char *just_past_start_mem = 0;
3512 /* We use this to map every character in the string. */
3513 char *translate = bufp->translate;
3515 /* Failure point stack. Each place that can handle a failure further
3516 down the line pushes a failure point on this stack. It consists of
3517 restart, regend, and reg_info for all registers corresponding to
3518 the subexpressions we're currently inside, plus the number of such
3519 registers, and, finally, two char *'s. The first char * is where
3520 to resume scanning the pattern; the second one is where to resume
3521 scanning the strings. If the latter is zero, the failure point is
3522 a ``dummy''; if a failure happens and the failure point is a dummy,
3523 it gets discarded and the next next one is tried. */
3524 #ifdef MATCH_MAY_ALLOCATE /* otherwise, this is global. */
3525 fail_stack_type fail_stack;
3528 static unsigned failure_id = 0;
3529 unsigned nfailure_points_pushed = 0, nfailure_points_popped = 0;
3532 /* This holds the pointer to the failure stack, when
3533 it is allocated relocatably. */
3534 fail_stack_elt_t *failure_stack_ptr;
3536 /* We fill all the registers internally, independent of what we
3537 return, for use in backreferences. The number here includes
3538 an element for register zero. */
3539 unsigned num_regs = bufp->re_nsub + 1;
3541 /* The currently active registers. */
3542 unsigned lowest_active_reg = NO_LOWEST_ACTIVE_REG;
3543 unsigned highest_active_reg = NO_HIGHEST_ACTIVE_REG;
3545 /* Information on the contents of registers. These are pointers into
3546 the input strings; they record just what was matched (on this
3547 attempt) by a subexpression part of the pattern, that is, the
3548 regnum-th regstart pointer points to where in the pattern we began
3549 matching and the regnum-th regend points to right after where we
3550 stopped matching the regnum-th subexpression. (The zeroth register
3551 keeps track of what the whole pattern matches.) */
3552 #ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global. */
3553 const char **regstart, **regend;
3556 /* If a group that's operated upon by a repetition operator fails to
3557 match anything, then the register for its start will need to be
3558 restored because it will have been set to wherever in the string we
3559 are when we last see its open-group operator. Similarly for a
3561 #ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global. */
3562 const char **old_regstart, **old_regend;
3565 /* The is_active field of reg_info helps us keep track of which (possibly
3566 nested) subexpressions we are currently in. The matched_something
3567 field of reg_info[reg_num] helps us tell whether or not we have
3568 matched any of the pattern so far this time through the reg_num-th
3569 subexpression. These two fields get reset each time through any
3570 loop their register is in. */
3571 #ifdef MATCH_MAY_ALLOCATE /* otherwise, this is global. */
3572 register_info_type *reg_info;
3575 /* The following record the register info as found in the above
3576 variables when we find a match better than any we've seen before.
3577 This happens as we backtrack through the failure points, which in
3578 turn happens only if we have not yet matched the entire string. */
3579 unsigned best_regs_set = false;
3580 #ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global. */
3581 const char **best_regstart, **best_regend;
3584 /* Logically, this is `best_regend[0]'. But we don't want to have to
3585 allocate space for that if we're not allocating space for anything
3586 else (see below). Also, we never need info about register 0 for
3587 any of the other register vectors, and it seems rather a kludge to
3588 treat `best_regend' differently than the rest. So we keep track of
3589 the end of the best match so far in a separate variable. We
3590 initialize this to NULL so that when we backtrack the first time
3591 and need to test it, it's not garbage. */
3592 const char *match_end = NULL;
3594 /* This helps SET_REGS_MATCHED avoid doing redundant work. */
3595 int set_regs_matched_done = 0;
3597 /* Used when we pop values we don't care about. */
3598 #ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global. */
3599 const char **reg_dummy;
3600 register_info_type *reg_info_dummy;
3604 /* Counts the total number of registers pushed. */
3605 unsigned num_regs_pushed = 0;
3608 DEBUG_PRINT1 ("\n\nEntering re_match_2.\n");
3612 #ifdef MATCH_MAY_ALLOCATE
3613 /* Do not bother to initialize all the register variables if there are
3614 no groups in the pattern, as it takes a fair amount of time. If
3615 there are groups, we include space for register 0 (the whole
3616 pattern), even though we never use it, since it simplifies the
3617 array indexing. We should fix this. */
3620 regstart = REGEX_TALLOC (num_regs, const char *);
3621 regend = REGEX_TALLOC (num_regs, const char *);
3622 old_regstart = REGEX_TALLOC (num_regs, const char *);
3623 old_regend = REGEX_TALLOC (num_regs, const char *);
3624 best_regstart = REGEX_TALLOC (num_regs, const char *);
3625 best_regend = REGEX_TALLOC (num_regs, const char *);
3626 reg_info = REGEX_TALLOC (num_regs, register_info_type);
3627 reg_dummy = REGEX_TALLOC (num_regs, const char *);
3628 reg_info_dummy = REGEX_TALLOC (num_regs, register_info_type);
3630 if (!(regstart && regend && old_regstart && old_regend && reg_info
3631 && best_regstart && best_regend && reg_dummy && reg_info_dummy))
3639 /* We must initialize all our variables to NULL, so that
3640 `FREE_VARIABLES' doesn't try to free them. */
3641 regstart = regend = old_regstart = old_regend = best_regstart
3642 = best_regend = reg_dummy = NULL;
3643 reg_info = reg_info_dummy = (register_info_type *) NULL;
3645 #endif /* MATCH_MAY_ALLOCATE */
3647 /* The starting position is bogus. */
3648 if (pos < 0 || pos > size1 + size2)
3654 /* Initialize subexpression text positions to -1 to mark ones that no
3655 start_memory/stop_memory has been seen for. Also initialize the
3656 register information struct. */
3657 for (mcnt = 1; mcnt < num_regs; mcnt++)
3659 regstart[mcnt] = regend[mcnt]
3660 = old_regstart[mcnt] = old_regend[mcnt] = REG_UNSET_VALUE;
3662 REG_MATCH_NULL_STRING_P (reg_info[mcnt]) = MATCH_NULL_UNSET_VALUE;
3663 IS_ACTIVE (reg_info[mcnt]) = 0;
3664 MATCHED_SOMETHING (reg_info[mcnt]) = 0;
3665 EVER_MATCHED_SOMETHING (reg_info[mcnt]) = 0;
3668 /* We move `string1' into `string2' if the latter's empty -- but not if
3669 `string1' is null. */
3670 if (size2 == 0 && string1 != NULL)
3677 end1 = string1 + size1;
3678 end2 = string2 + size2;
3680 /* Compute where to stop matching, within the two strings. */
3683 end_match_1 = string1 + stop;
3684 end_match_2 = string2;
3689 end_match_2 = string2 + stop - size1;
3692 /* `p' scans through the pattern as `d' scans through the data.
3693 `dend' is the end of the input string that `d' points within. `d'
3694 is advanced into the following input string whenever necessary, but
3695 this happens before fetching; therefore, at the beginning of the
3696 loop, `d' can be pointing at the end of a string, but it cannot
3698 if (size1 > 0 && pos <= size1)
3705 d = string2 + pos - size1;
3709 DEBUG_PRINT1 ("The compiled pattern is: ");
3710 DEBUG_PRINT_COMPILED_PATTERN (bufp, p, pend);
3711 DEBUG_PRINT1 ("The string to match is: `");
3712 DEBUG_PRINT_DOUBLE_STRING (d, string1, size1, string2, size2);
3713 DEBUG_PRINT1 ("'\n");
3715 /* This loops over pattern commands. It exits by returning from the
3716 function if the match is complete, or it drops through if the match
3717 fails at this starting point in the input data. */
3720 DEBUG_PRINT2 ("\n0x%x: ", p);
3723 { /* End of pattern means we might have succeeded. */
3724 DEBUG_PRINT1 ("end of pattern ... ");
3726 /* If we haven't matched the entire string, and we want the
3727 longest match, try backtracking. */
3728 if (d != end_match_2)
3730 /* 1 if this match ends in the same string (string1 or string2)
3731 as the best previous match. */
3732 boolean same_str_p = (FIRST_STRING_P (match_end)
3733 == MATCHING_IN_FIRST_STRING);
3734 /* 1 if this match is the best seen so far. */
3735 boolean best_match_p;
3737 /* AIX compiler got confused when this was combined
3738 with the previous declaration. */
3740 best_match_p = d > match_end;
3742 best_match_p = !MATCHING_IN_FIRST_STRING;
3744 DEBUG_PRINT1 ("backtracking.\n");
3746 if (!FAIL_STACK_EMPTY ())
3747 { /* More failure points to try. */
3749 /* If exceeds best match so far, save it. */
3750 if (!best_regs_set || best_match_p)
3752 best_regs_set = true;
3755 DEBUG_PRINT1 ("\nSAVING match as best so far.\n");
3757 for (mcnt = 1; mcnt < num_regs; mcnt++)
3759 best_regstart[mcnt] = regstart[mcnt];
3760 best_regend[mcnt] = regend[mcnt];
3766 /* If no failure points, don't restore garbage. And if
3767 last match is real best match, don't restore second
3769 else if (best_regs_set && !best_match_p)
3772 /* Restore best match. It may happen that `dend ==
3773 end_match_1' while the restored d is in string2.
3774 For example, the pattern `x.*y.*z' against the
3775 strings `x-' and `y-z-', if the two strings are
3776 not consecutive in memory. */
3777 DEBUG_PRINT1 ("Restoring best registers.\n");
3780 dend = ((d >= string1 && d <= end1)
3781 ? end_match_1 : end_match_2);
3783 for (mcnt = 1; mcnt < num_regs; mcnt++)
3785 regstart[mcnt] = best_regstart[mcnt];
3786 regend[mcnt] = best_regend[mcnt];
3789 } /* d != end_match_2 */
3792 DEBUG_PRINT1 ("Accepting match.\n");
3794 /* If caller wants register contents data back, do it. */
3795 if (regs && !bufp->no_sub)
3797 /* Have the register data arrays been allocated? */
3798 if (bufp->regs_allocated == REGS_UNALLOCATED)
3799 { /* No. So allocate them with malloc. We need one
3800 extra element beyond `num_regs' for the `-1' marker
3802 regs->num_regs = MAX (RE_NREGS, num_regs + 1);
3803 regs->start = TALLOC (regs->num_regs, regoff_t);
3804 regs->end = TALLOC (regs->num_regs, regoff_t);
3805 if (regs->start == NULL || regs->end == NULL)
3810 bufp->regs_allocated = REGS_REALLOCATE;
3812 else if (bufp->regs_allocated == REGS_REALLOCATE)
3813 { /* Yes. If we need more elements than were already
3814 allocated, reallocate them. If we need fewer, just
3816 if (regs->num_regs < num_regs + 1)
3818 regs->num_regs = num_regs + 1;
3819 RETALLOC (regs->start, regs->num_regs, regoff_t);
3820 RETALLOC (regs->end, regs->num_regs, regoff_t);
3821 if (regs->start == NULL || regs->end == NULL)
3830 /* These braces fend off a "empty body in an else-statement"
3831 warning under GCC when assert expands to nothing. */
3832 assert (bufp->regs_allocated == REGS_FIXED);
3835 /* Convert the pointer data in `regstart' and `regend' to
3836 indices. Register zero has to be set differently,
3837 since we haven't kept track of any info for it. */
3838 if (regs->num_regs > 0)
3840 regs->start[0] = pos;
3841 regs->end[0] = (MATCHING_IN_FIRST_STRING
3842 ? ((regoff_t) (d - string1))
3843 : ((regoff_t) (d - string2 + size1)));
3846 /* Go through the first `min (num_regs, regs->num_regs)'
3847 registers, since that is all we initialized. */
3848 for (mcnt = 1; mcnt < MIN (num_regs, regs->num_regs); mcnt++)
3850 if (REG_UNSET (regstart[mcnt]) || REG_UNSET (regend[mcnt]))
3851 regs->start[mcnt] = regs->end[mcnt] = -1;
3855 = (regoff_t) POINTER_TO_OFFSET (regstart[mcnt]);
3857 = (regoff_t) POINTER_TO_OFFSET (regend[mcnt]);
3861 /* If the regs structure we return has more elements than
3862 were in the pattern, set the extra elements to -1. If
3863 we (re)allocated the registers, this is the case,
3864 because we always allocate enough to have at least one
3866 for (mcnt = num_regs; mcnt < regs->num_regs; mcnt++)
3867 regs->start[mcnt] = regs->end[mcnt] = -1;
3868 } /* regs && !bufp->no_sub */
3870 DEBUG_PRINT4 ("%u failure points pushed, %u popped (%u remain).\n",
3871 nfailure_points_pushed, nfailure_points_popped,
3872 nfailure_points_pushed - nfailure_points_popped);
3873 DEBUG_PRINT2 ("%u registers pushed.\n", num_regs_pushed);
3875 mcnt = d - pos - (MATCHING_IN_FIRST_STRING
3879 DEBUG_PRINT2 ("Returning %d from re_match_2.\n", mcnt);
3885 /* Otherwise match next pattern command. */
3886 switch (SWITCH_ENUM_CAST ((re_opcode_t) *p++))
3888 /* Ignore these. Used to ignore the n of succeed_n's which
3889 currently have n == 0. */
3891 DEBUG_PRINT1 ("EXECUTING no_op.\n");
3895 DEBUG_PRINT1 ("EXECUTING succeed.\n");
3898 /* Match the next n pattern characters exactly. The following
3899 byte in the pattern defines n, and the n bytes after that
3900 are the characters to match. */
3903 DEBUG_PRINT2 ("EXECUTING exactn %d.\n", mcnt);
3905 /* This is written out as an if-else so we don't waste time
3906 testing `translate' inside the loop. */
3912 if (translate[(unsigned char) *d++] != (char) *p++)
3922 if (*d++ != (char) *p++) goto fail;
3926 SET_REGS_MATCHED ();
3930 /* Match any character except possibly a newline or a null. */
3932 DEBUG_PRINT1 ("EXECUTING anychar.\n");
3936 if ((!(bufp->syntax & RE_DOT_NEWLINE) && TRANSLATE (*d) == '\n')
3937 || (bufp->syntax & RE_DOT_NOT_NULL && TRANSLATE (*d) == '\000'))
3940 SET_REGS_MATCHED ();
3941 DEBUG_PRINT2 (" Matched `%d'.\n", *d);
3949 register unsigned char c;
3950 boolean not = (re_opcode_t) *(p - 1) == charset_not;
3952 DEBUG_PRINT2 ("EXECUTING charset%s.\n", not ? "_not" : "");
3955 c = TRANSLATE (*d); /* The character to match. */
3957 /* Cast to `unsigned' instead of `unsigned char' in case the
3958 bit list is a full 32 bytes long. */
3959 if (c < (unsigned) (*p * BYTEWIDTH)
3960 && p[1 + c / BYTEWIDTH] & (1 << (c % BYTEWIDTH)))
3965 if (!not) goto fail;
3967 SET_REGS_MATCHED ();
3973 /* The beginning of a group is represented by start_memory.
3974 The arguments are the register number in the next byte, and the
3975 number of groups inner to this one in the next. The text
3976 matched within the group is recorded (in the internal
3977 registers data structure) under the register number. */
3979 DEBUG_PRINT3 ("EXECUTING start_memory %d (%d):\n", *p, p[1]);
3981 /* Find out if this group can match the empty string. */
3982 p1 = p; /* To send to group_match_null_string_p. */
3984 if (REG_MATCH_NULL_STRING_P (reg_info[*p]) == MATCH_NULL_UNSET_VALUE)
3985 REG_MATCH_NULL_STRING_P (reg_info[*p])
3986 = group_match_null_string_p (&p1, pend, reg_info);
3988 /* Save the position in the string where we were the last time
3989 we were at this open-group operator in case the group is
3990 operated upon by a repetition operator, e.g., with `(a*)*b'
3991 against `ab'; then we want to ignore where we are now in
3992 the string in case this attempt to match fails. */
3993 old_regstart[*p] = REG_MATCH_NULL_STRING_P (reg_info[*p])
3994 ? REG_UNSET (regstart[*p]) ? d : regstart[*p]
3996 DEBUG_PRINT2 (" old_regstart: %d\n",
3997 POINTER_TO_OFFSET (old_regstart[*p]));
4000 DEBUG_PRINT2 (" regstart: %d\n", POINTER_TO_OFFSET (regstart[*p]));
4002 IS_ACTIVE (reg_info[*p]) = 1;
4003 MATCHED_SOMETHING (reg_info[*p]) = 0;
4005 /* Clear this whenever we change the register activity status. */
4006 set_regs_matched_done = 0;
4008 /* This is the new highest active register. */
4009 highest_active_reg = *p;
4011 /* If nothing was active before, this is the new lowest active
4013 if (lowest_active_reg == NO_LOWEST_ACTIVE_REG)
4014 lowest_active_reg = *p;
4016 /* Move past the register number and inner group count. */
4018 just_past_start_mem = p;
4023 /* The stop_memory opcode represents the end of a group. Its
4024 arguments are the same as start_memory's: the register
4025 number, and the number of inner groups. */
4027 DEBUG_PRINT3 ("EXECUTING stop_memory %d (%d):\n", *p, p[1]);
4029 /* We need to save the string position the last time we were at
4030 this close-group operator in case the group is operated
4031 upon by a repetition operator, e.g., with `((a*)*(b*)*)*'
4032 against `aba'; then we want to ignore where we are now in
4033 the string in case this attempt to match fails. */
4034 old_regend[*p] = REG_MATCH_NULL_STRING_P (reg_info[*p])
4035 ? REG_UNSET (regend[*p]) ? d : regend[*p]
4037 DEBUG_PRINT2 (" old_regend: %d\n",
4038 POINTER_TO_OFFSET (old_regend[*p]));
4041 DEBUG_PRINT2 (" regend: %d\n", POINTER_TO_OFFSET (regend[*p]));
4043 /* This register isn't active anymore. */
4044 IS_ACTIVE (reg_info[*p]) = 0;
4046 /* Clear this whenever we change the register activity status. */
4047 set_regs_matched_done = 0;
4049 /* If this was the only register active, nothing is active
4051 if (lowest_active_reg == highest_active_reg)
4053 lowest_active_reg = NO_LOWEST_ACTIVE_REG;
4054 highest_active_reg = NO_HIGHEST_ACTIVE_REG;
4057 { /* We must scan for the new highest active register, since
4058 it isn't necessarily one less than now: consider
4059 (a(b)c(d(e)f)g). When group 3 ends, after the f), the
4060 new highest active register is 1. */
4061 unsigned char r = *p - 1;
4062 while (r > 0 && !IS_ACTIVE (reg_info[r]))
4065 /* If we end up at register zero, that means that we saved
4066 the registers as the result of an `on_failure_jump', not
4067 a `start_memory', and we jumped to past the innermost
4068 `stop_memory'. For example, in ((.)*) we save
4069 registers 1 and 2 as a result of the *, but when we pop
4070 back to the second ), we are at the stop_memory 1.
4071 Thus, nothing is active. */
4074 lowest_active_reg = NO_LOWEST_ACTIVE_REG;
4075 highest_active_reg = NO_HIGHEST_ACTIVE_REG;
4078 highest_active_reg = r;
4081 /* If just failed to match something this time around with a
4082 group that's operated on by a repetition operator, try to
4083 force exit from the ``loop'', and restore the register
4084 information for this group that we had before trying this
4086 if ((!MATCHED_SOMETHING (reg_info[*p])
4087 || just_past_start_mem == p - 1)
4090 boolean is_a_jump_n = false;
4094 switch ((re_opcode_t) *p1++)
4098 case pop_failure_jump:
4099 case maybe_pop_jump:
4101 case dummy_failure_jump:
4102 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
4112 /* If the next operation is a jump backwards in the pattern
4113 to an on_failure_jump right before the start_memory
4114 corresponding to this stop_memory, exit from the loop
4115 by forcing a failure after pushing on the stack the
4116 on_failure_jump's jump in the pattern, and d. */
4117 if (mcnt < 0 && (re_opcode_t) *p1 == on_failure_jump
4118 && (re_opcode_t) p1[3] == start_memory && p1[4] == *p)
4120 /* If this group ever matched anything, then restore
4121 what its registers were before trying this last
4122 failed match, e.g., with `(a*)*b' against `ab' for
4123 regstart[1], and, e.g., with `((a*)*(b*)*)*'
4124 against `aba' for regend[3].
4126 Also restore the registers for inner groups for,
4127 e.g., `((a*)(b*))*' against `aba' (register 3 would
4128 otherwise get trashed). */
4130 if (EVER_MATCHED_SOMETHING (reg_info[*p]))
4134 EVER_MATCHED_SOMETHING (reg_info[*p]) = 0;
4136 /* Restore this and inner groups' (if any) registers. */
4137 for (r = *p; r < *p + *(p + 1); r++)
4139 regstart[r] = old_regstart[r];
4141 /* xx why this test? */
4142 if (old_regend[r] >= regstart[r])
4143 regend[r] = old_regend[r];
4147 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
4148 PUSH_FAILURE_POINT (p1 + mcnt, d, -2);
4154 /* Move past the register number and the inner group count. */
4159 /* \<digit> has been turned into a `duplicate' command which is
4160 followed by the numeric value of <digit> as the register number. */
4163 register const char *d2, *dend2;
4164 int regno = *p++; /* Get which register to match against. */
4165 DEBUG_PRINT2 ("EXECUTING duplicate %d.\n", regno);
4167 /* Can't back reference a group which we've never matched. */
4168 if (REG_UNSET (regstart[regno]) || REG_UNSET (regend[regno]))
4171 /* Where in input to try to start matching. */
4172 d2 = regstart[regno];
4174 /* Where to stop matching; if both the place to start and
4175 the place to stop matching are in the same string, then
4176 set to the place to stop, otherwise, for now have to use
4177 the end of the first string. */
4179 dend2 = ((FIRST_STRING_P (regstart[regno])
4180 == FIRST_STRING_P (regend[regno]))
4181 ? regend[regno] : end_match_1);
4184 /* If necessary, advance to next segment in register
4188 if (dend2 == end_match_2) break;
4189 if (dend2 == regend[regno]) break;
4191 /* End of string1 => advance to string2. */
4193 dend2 = regend[regno];
4195 /* At end of register contents => success */
4196 if (d2 == dend2) break;
4198 /* If necessary, advance to next segment in data. */
4201 /* How many characters left in this segment to match. */
4204 /* Want how many consecutive characters we can match in
4205 one shot, so, if necessary, adjust the count. */
4206 if (mcnt > dend2 - d2)
4209 /* Compare that many; failure if mismatch, else move
4212 ? bcmp_translate (d, d2, mcnt, translate)
4213 : bcmp (d, d2, mcnt))
4215 d += mcnt, d2 += mcnt;
4217 /* Do this because we've match some characters. */
4218 SET_REGS_MATCHED ();
4224 /* begline matches the empty string at the beginning of the string
4225 (unless `not_bol' is set in `bufp'), and, if
4226 `newline_anchor' is set, after newlines. */
4228 DEBUG_PRINT1 ("EXECUTING begline.\n");
4230 if (AT_STRINGS_BEG (d))
4232 if (!bufp->not_bol) break;
4234 else if (d[-1] == '\n' && bufp->newline_anchor)
4238 /* In all other cases, we fail. */
4242 /* endline is the dual of begline. */
4244 DEBUG_PRINT1 ("EXECUTING endline.\n");
4246 if (AT_STRINGS_END (d))
4248 if (!bufp->not_eol) break;
4251 /* We have to ``prefetch'' the next character. */
4252 else if ((d == end1 ? *string2 : *d) == '\n'
4253 && bufp->newline_anchor)
4260 /* Match at the very beginning of the data. */
4262 DEBUG_PRINT1 ("EXECUTING begbuf.\n");
4263 if (AT_STRINGS_BEG (d))
4268 /* Match at the very end of the data. */
4270 DEBUG_PRINT1 ("EXECUTING endbuf.\n");
4271 if (AT_STRINGS_END (d))
4276 /* on_failure_keep_string_jump is used to optimize `.*\n'. It
4277 pushes NULL as the value for the string on the stack. Then
4278 `pop_failure_point' will keep the current value for the
4279 string, instead of restoring it. To see why, consider
4280 matching `foo\nbar' against `.*\n'. The .* matches the foo;
4281 then the . fails against the \n. But the next thing we want
4282 to do is match the \n against the \n; if we restored the
4283 string value, we would be back at the foo.
4285 Because this is used only in specific cases, we don't need to
4286 check all the things that `on_failure_jump' does, to make
4287 sure the right things get saved on the stack. Hence we don't
4288 share its code. The only reason to push anything on the
4289 stack at all is that otherwise we would have to change
4290 `anychar's code to do something besides goto fail in this
4291 case; that seems worse than this. */
4292 case on_failure_keep_string_jump:
4293 DEBUG_PRINT1 ("EXECUTING on_failure_keep_string_jump");
4295 EXTRACT_NUMBER_AND_INCR (mcnt, p);
4296 DEBUG_PRINT3 (" %d (to 0x%x):\n", mcnt, p + mcnt);
4298 PUSH_FAILURE_POINT (p + mcnt, NULL, -2);
4302 /* Uses of on_failure_jump:
4304 Each alternative starts with an on_failure_jump that points
4305 to the beginning of the next alternative. Each alternative
4306 except the last ends with a jump that in effect jumps past
4307 the rest of the alternatives. (They really jump to the
4308 ending jump of the following alternative, because tensioning
4309 these jumps is a hassle.)
4311 Repeats start with an on_failure_jump that points past both
4312 the repetition text and either the following jump or
4313 pop_failure_jump back to this on_failure_jump. */
4314 case on_failure_jump:
4316 DEBUG_PRINT1 ("EXECUTING on_failure_jump");
4318 EXTRACT_NUMBER_AND_INCR (mcnt, p);
4319 DEBUG_PRINT3 (" %d (to 0x%x)", mcnt, p + mcnt);
4321 /* If this on_failure_jump comes right before a group (i.e.,
4322 the original * applied to a group), save the information
4323 for that group and all inner ones, so that if we fail back
4324 to this point, the group's information will be correct.
4325 For example, in \(a*\)*\1, we need the preceding group,
4326 and in \(\(a*\)b*\)\2, we need the inner group. */
4328 /* We can't use `p' to check ahead because we push
4329 a failure point to `p + mcnt' after we do this. */
4332 /* We need to skip no_op's before we look for the
4333 start_memory in case this on_failure_jump is happening as
4334 the result of a completed succeed_n, as in \(a\)\{1,3\}b\1
4336 while (p1 < pend && (re_opcode_t) *p1 == no_op)
4339 if (p1 < pend && (re_opcode_t) *p1 == start_memory)
4341 /* We have a new highest active register now. This will
4342 get reset at the start_memory we are about to get to,
4343 but we will have saved all the registers relevant to
4344 this repetition op, as described above. */
4345 highest_active_reg = *(p1 + 1) + *(p1 + 2);
4346 if (lowest_active_reg == NO_LOWEST_ACTIVE_REG)
4347 lowest_active_reg = *(p1 + 1);
4350 DEBUG_PRINT1 (":\n");
4351 PUSH_FAILURE_POINT (p + mcnt, d, -2);
4355 /* A smart repeat ends with `maybe_pop_jump'.
4356 We change it to either `pop_failure_jump' or `jump'. */
4357 case maybe_pop_jump:
4358 EXTRACT_NUMBER_AND_INCR (mcnt, p);
4359 DEBUG_PRINT2 ("EXECUTING maybe_pop_jump %d.\n", mcnt);
4361 register unsigned char *p2 = p;
4363 /* Compare the beginning of the repeat with what in the
4364 pattern follows its end. If we can establish that there
4365 is nothing that they would both match, i.e., that we
4366 would have to backtrack because of (as in, e.g., `a*a')
4367 then we can change to pop_failure_jump, because we'll
4368 never have to backtrack.
4370 This is not true in the case of alternatives: in
4371 `(a|ab)*' we do need to backtrack to the `ab' alternative
4372 (e.g., if the string was `ab'). But instead of trying to
4373 detect that here, the alternative has put on a dummy
4374 failure point which is what we will end up popping. */
4376 /* Skip over open/close-group commands.
4377 If what follows this loop is a ...+ construct,
4378 look at what begins its body, since we will have to
4379 match at least one of that. */
4383 && ((re_opcode_t) *p2 == stop_memory
4384 || (re_opcode_t) *p2 == start_memory))
4386 else if (p2 + 6 < pend
4387 && (re_opcode_t) *p2 == dummy_failure_jump)
4394 /* p1[0] ... p1[2] are the `on_failure_jump' corresponding
4395 to the `maybe_finalize_jump' of this case. Examine what
4398 /* If we're at the end of the pattern, we can change. */
4401 /* Consider what happens when matching ":\(.*\)"
4402 against ":/". I don't really understand this code
4404 p[-3] = (unsigned char) pop_failure_jump;
4406 (" End of pattern: change to `pop_failure_jump'.\n");
4409 else if ((re_opcode_t) *p2 == exactn
4410 || (bufp->newline_anchor && (re_opcode_t) *p2 == endline))
4412 register unsigned char c
4413 = *p2 == (unsigned char) endline ? '\n' : p2[2];
4415 if ((re_opcode_t) p1[3] == exactn && p1[5] != c)
4417 p[-3] = (unsigned char) pop_failure_jump;
4418 DEBUG_PRINT3 (" %c != %c => pop_failure_jump.\n",
4422 else if ((re_opcode_t) p1[3] == charset
4423 || (re_opcode_t) p1[3] == charset_not)
4425 int not = (re_opcode_t) p1[3] == charset_not;
4427 if (c < (unsigned char) (p1[4] * BYTEWIDTH)
4428 && p1[5 + c / BYTEWIDTH] & (1 << (c % BYTEWIDTH)))
4431 /* `not' is equal to 1 if c would match, which means
4432 that we can't change to pop_failure_jump. */
4435 p[-3] = (unsigned char) pop_failure_jump;
4436 DEBUG_PRINT1 (" No match => pop_failure_jump.\n");
4440 else if ((re_opcode_t) *p2 == charset)
4443 register unsigned char c
4444 = *p2 == (unsigned char) endline ? '\n' : p2[2];
4447 if ((re_opcode_t) p1[3] == exactn
4448 && ! ((int) p2[1] * BYTEWIDTH > (int) p1[4]
4449 && (p2[1 + p1[4] / BYTEWIDTH]
4450 & (1 << (p1[4] % BYTEWIDTH)))))
4452 p[-3] = (unsigned char) pop_failure_jump;
4453 DEBUG_PRINT3 (" %c != %c => pop_failure_jump.\n",
4457 else if ((re_opcode_t) p1[3] == charset_not)
4460 /* We win if the charset_not inside the loop
4461 lists every character listed in the charset after. */
4462 for (idx = 0; idx < (int) p2[1]; idx++)
4463 if (! (p2[2 + idx] == 0
4464 || (idx < (int) p1[4]
4465 && ((p2[2 + idx] & ~ p1[5 + idx]) == 0))))
4470 p[-3] = (unsigned char) pop_failure_jump;
4471 DEBUG_PRINT1 (" No match => pop_failure_jump.\n");
4474 else if ((re_opcode_t) p1[3] == charset)
4477 /* We win if the charset inside the loop
4478 has no overlap with the one after the loop. */
4480 idx < (int) p2[1] && idx < (int) p1[4];
4482 if ((p2[2 + idx] & p1[5 + idx]) != 0)
4485 if (idx == p2[1] || idx == p1[4])
4487 p[-3] = (unsigned char) pop_failure_jump;
4488 DEBUG_PRINT1 (" No match => pop_failure_jump.\n");
4493 p -= 2; /* Point at relative address again. */
4494 if ((re_opcode_t) p[-1] != pop_failure_jump)
4496 p[-1] = (unsigned char) jump;
4497 DEBUG_PRINT1 (" Match => jump.\n");
4498 goto unconditional_jump;
4500 /* Note fall through. */
4503 /* The end of a simple repeat has a pop_failure_jump back to
4504 its matching on_failure_jump, where the latter will push a
4505 failure point. The pop_failure_jump takes off failure
4506 points put on by this pop_failure_jump's matching
4507 on_failure_jump; we got through the pattern to here from the
4508 matching on_failure_jump, so didn't fail. */
4509 case pop_failure_jump:
4511 /* We need to pass separate storage for the lowest and
4512 highest registers, even though we don't care about the
4513 actual values. Otherwise, we will restore only one
4514 register from the stack, since lowest will == highest in
4515 `pop_failure_point'. */
4516 unsigned dummy_low_reg, dummy_high_reg;
4517 unsigned char *pdummy;
4520 DEBUG_PRINT1 ("EXECUTING pop_failure_jump.\n");
4521 POP_FAILURE_POINT (sdummy, pdummy,
4522 dummy_low_reg, dummy_high_reg,
4523 reg_dummy, reg_dummy, reg_info_dummy);
4525 /* Note fall through. */
4528 /* Unconditionally jump (without popping any failure points). */
4531 EXTRACT_NUMBER_AND_INCR (mcnt, p); /* Get the amount to jump. */
4532 DEBUG_PRINT2 ("EXECUTING jump %d ", mcnt);
4533 p += mcnt; /* Do the jump. */
4534 DEBUG_PRINT2 ("(to 0x%x).\n", p);
4538 /* We need this opcode so we can detect where alternatives end
4539 in `group_match_null_string_p' et al. */
4541 DEBUG_PRINT1 ("EXECUTING jump_past_alt.\n");
4542 goto unconditional_jump;
4545 /* Normally, the on_failure_jump pushes a failure point, which
4546 then gets popped at pop_failure_jump. We will end up at
4547 pop_failure_jump, also, and with a pattern of, say, `a+', we
4548 are skipping over the on_failure_jump, so we have to push
4549 something meaningless for pop_failure_jump to pop. */
4550 case dummy_failure_jump:
4551 DEBUG_PRINT1 ("EXECUTING dummy_failure_jump.\n");
4552 /* It doesn't matter what we push for the string here. What
4553 the code at `fail' tests is the value for the pattern. */
4554 PUSH_FAILURE_POINT (0, 0, -2);
4555 goto unconditional_jump;
4558 /* At the end of an alternative, we need to push a dummy failure
4559 point in case we are followed by a `pop_failure_jump', because
4560 we don't want the failure point for the alternative to be
4561 popped. For example, matching `(a|ab)*' against `aab'
4562 requires that we match the `ab' alternative. */
4563 case push_dummy_failure:
4564 DEBUG_PRINT1 ("EXECUTING push_dummy_failure.\n");
4565 /* See comments just above at `dummy_failure_jump' about the
4567 PUSH_FAILURE_POINT (0, 0, -2);
4570 /* Have to succeed matching what follows at least n times.
4571 After that, handle like `on_failure_jump'. */
4573 EXTRACT_NUMBER (mcnt, p + 2);
4574 DEBUG_PRINT2 ("EXECUTING succeed_n %d.\n", mcnt);
4577 /* Originally, this is how many times we HAVE to succeed. */
4582 STORE_NUMBER_AND_INCR (p, mcnt);
4583 DEBUG_PRINT3 (" Setting 0x%x to %d.\n", p, mcnt);
4587 DEBUG_PRINT2 (" Setting two bytes from 0x%x to no_op.\n", p+2);
4588 p[2] = (unsigned char) no_op;
4589 p[3] = (unsigned char) no_op;
4595 EXTRACT_NUMBER (mcnt, p + 2);
4596 DEBUG_PRINT2 ("EXECUTING jump_n %d.\n", mcnt);
4598 /* Originally, this is how many times we CAN jump. */
4602 STORE_NUMBER (p + 2, mcnt);
4603 goto unconditional_jump;
4605 /* If don't have to jump any more, skip over the rest of command. */
4612 DEBUG_PRINT1 ("EXECUTING set_number_at.\n");
4614 EXTRACT_NUMBER_AND_INCR (mcnt, p);
4616 EXTRACT_NUMBER_AND_INCR (mcnt, p);
4617 DEBUG_PRINT3 (" Setting 0x%x to %d.\n", p1, mcnt);
4618 STORE_NUMBER (p1, mcnt);
4623 DEBUG_PRINT1 ("EXECUTING wordbound.\n");
4624 if (AT_WORD_BOUNDARY (d))
4629 DEBUG_PRINT1 ("EXECUTING notwordbound.\n");
4630 if (AT_WORD_BOUNDARY (d))
4635 DEBUG_PRINT1 ("EXECUTING wordbeg.\n");
4636 if (WORDCHAR_P (d) && (AT_STRINGS_BEG (d) || !WORDCHAR_P (d - 1)))
4641 DEBUG_PRINT1 ("EXECUTING wordend.\n");
4642 if (!AT_STRINGS_BEG (d) && WORDCHAR_P (d - 1)
4643 && (!WORDCHAR_P (d) || AT_STRINGS_END (d)))
4649 DEBUG_PRINT1 ("EXECUTING before_dot.\n");
4650 if (PTR_CHAR_POS ((unsigned char *) d) >= point)
4655 DEBUG_PRINT1 ("EXECUTING at_dot.\n");
4656 if (PTR_CHAR_POS ((unsigned char *) d) != point)
4661 DEBUG_PRINT1 ("EXECUTING after_dot.\n");
4662 if (PTR_CHAR_POS ((unsigned char *) d) <= point)
4665 #if 0 /* not emacs19 */
4667 DEBUG_PRINT1 ("EXECUTING at_dot.\n");
4668 if (PTR_CHAR_POS ((unsigned char *) d) + 1 != point)
4671 #endif /* not emacs19 */
4674 DEBUG_PRINT2 ("EXECUTING syntaxspec %d.\n", mcnt);
4679 DEBUG_PRINT1 ("EXECUTING Emacs wordchar.\n");
4683 /* Can't use *d++ here; SYNTAX may be an unsafe macro. */
4685 if (SYNTAX (d[-1]) != (enum syntaxcode) mcnt)
4687 SET_REGS_MATCHED ();
4691 DEBUG_PRINT2 ("EXECUTING notsyntaxspec %d.\n", mcnt);
4693 goto matchnotsyntax;
4696 DEBUG_PRINT1 ("EXECUTING Emacs notwordchar.\n");
4700 /* Can't use *d++ here; SYNTAX may be an unsafe macro. */
4702 if (SYNTAX (d[-1]) == (enum syntaxcode) mcnt)
4704 SET_REGS_MATCHED ();
4707 #else /* not emacs */
4709 DEBUG_PRINT1 ("EXECUTING non-Emacs wordchar.\n");
4711 if (!WORDCHAR_P (d))
4713 SET_REGS_MATCHED ();
4718 DEBUG_PRINT1 ("EXECUTING non-Emacs notwordchar.\n");
4722 SET_REGS_MATCHED ();
4725 #endif /* not emacs */
4730 continue; /* Successfully executed one pattern command; keep going. */
4733 /* We goto here if a matching operation fails. */
4735 if (!FAIL_STACK_EMPTY ())
4736 { /* A restart point is known. Restore to that state. */
4737 DEBUG_PRINT1 ("\nFAIL:\n");
4738 POP_FAILURE_POINT (d, p,
4739 lowest_active_reg, highest_active_reg,
4740 regstart, regend, reg_info);
4742 /* If this failure point is a dummy, try the next one. */
4746 /* If we failed to the end of the pattern, don't examine *p. */
4750 boolean is_a_jump_n = false;
4752 /* If failed to a backwards jump that's part of a repetition
4753 loop, need to pop this failure point and use the next one. */
4754 switch ((re_opcode_t) *p)
4758 case maybe_pop_jump:
4759 case pop_failure_jump:
4762 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
4765 if ((is_a_jump_n && (re_opcode_t) *p1 == succeed_n)
4767 && (re_opcode_t) *p1 == on_failure_jump))
4775 if (d >= string1 && d <= end1)
4779 break; /* Matching at this starting point really fails. */
4783 goto restore_best_regs;
4787 return -1; /* Failure to match. */
4790 /* Subroutine definitions for re_match_2. */
4793 /* We are passed P pointing to a register number after a start_memory.
4795 Return true if the pattern up to the corresponding stop_memory can
4796 match the empty string, and false otherwise.
4798 If we find the matching stop_memory, sets P to point to one past its number.
4799 Otherwise, sets P to an undefined byte less than or equal to END.
4801 We don't handle duplicates properly (yet). */
4804 group_match_null_string_p (p, end, reg_info)
4805 unsigned char **p, *end;
4806 register_info_type *reg_info;
4809 /* Point to after the args to the start_memory. */
4810 unsigned char *p1 = *p + 2;
4814 /* Skip over opcodes that can match nothing, and return true or
4815 false, as appropriate, when we get to one that can't, or to the
4816 matching stop_memory. */
4818 switch ((re_opcode_t) *p1)
4820 /* Could be either a loop or a series of alternatives. */
4821 case on_failure_jump:
4823 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
4825 /* If the next operation is not a jump backwards in the
4830 /* Go through the on_failure_jumps of the alternatives,
4831 seeing if any of the alternatives cannot match nothing.
4832 The last alternative starts with only a jump,
4833 whereas the rest start with on_failure_jump and end
4834 with a jump, e.g., here is the pattern for `a|b|c':
4836 /on_failure_jump/0/6/exactn/1/a/jump_past_alt/0/6
4837 /on_failure_jump/0/6/exactn/1/b/jump_past_alt/0/3
4840 So, we have to first go through the first (n-1)
4841 alternatives and then deal with the last one separately. */
4844 /* Deal with the first (n-1) alternatives, which start
4845 with an on_failure_jump (see above) that jumps to right
4846 past a jump_past_alt. */
4848 while ((re_opcode_t) p1[mcnt-3] == jump_past_alt)
4850 /* `mcnt' holds how many bytes long the alternative
4851 is, including the ending `jump_past_alt' and
4854 if (!alt_match_null_string_p (p1, p1 + mcnt - 3,
4858 /* Move to right after this alternative, including the
4862 /* Break if it's the beginning of an n-th alternative
4863 that doesn't begin with an on_failure_jump. */
4864 if ((re_opcode_t) *p1 != on_failure_jump)
4867 /* Still have to check that it's not an n-th
4868 alternative that starts with an on_failure_jump. */
4870 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
4871 if ((re_opcode_t) p1[mcnt-3] != jump_past_alt)
4873 /* Get to the beginning of the n-th alternative. */
4879 /* Deal with the last alternative: go back and get number
4880 of the `jump_past_alt' just before it. `mcnt' contains
4881 the length of the alternative. */
4882 EXTRACT_NUMBER (mcnt, p1 - 2);
4884 if (!alt_match_null_string_p (p1, p1 + mcnt, reg_info))
4887 p1 += mcnt; /* Get past the n-th alternative. */
4893 assert (p1[1] == **p);
4899 if (!common_op_match_null_string_p (&p1, end, reg_info))
4902 } /* while p1 < end */
4905 } /* group_match_null_string_p */
4908 /* Similar to group_match_null_string_p, but doesn't deal with alternatives:
4909 It expects P to be the first byte of a single alternative and END one
4910 byte past the last. The alternative can contain groups. */
4913 alt_match_null_string_p (p, end, reg_info)
4914 unsigned char *p, *end;
4915 register_info_type *reg_info;
4918 unsigned char *p1 = p;
4922 /* Skip over opcodes that can match nothing, and break when we get
4923 to one that can't. */
4925 switch ((re_opcode_t) *p1)
4928 case on_failure_jump:
4930 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
4935 if (!common_op_match_null_string_p (&p1, end, reg_info))
4938 } /* while p1 < end */
4941 } /* alt_match_null_string_p */
4944 /* Deals with the ops common to group_match_null_string_p and
4945 alt_match_null_string_p.
4947 Sets P to one after the op and its arguments, if any. */
4950 common_op_match_null_string_p (p, end, reg_info)
4951 unsigned char **p, *end;
4952 register_info_type *reg_info;
4957 unsigned char *p1 = *p;
4959 switch ((re_opcode_t) *p1++)
4979 assert (reg_no > 0 && reg_no <= MAX_REGNUM);
4980 ret = group_match_null_string_p (&p1, end, reg_info);
4982 /* Have to set this here in case we're checking a group which
4983 contains a group and a back reference to it. */
4985 if (REG_MATCH_NULL_STRING_P (reg_info[reg_no]) == MATCH_NULL_UNSET_VALUE)
4986 REG_MATCH_NULL_STRING_P (reg_info[reg_no]) = ret;
4992 /* If this is an optimized succeed_n for zero times, make the jump. */
4994 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
5002 /* Get to the number of times to succeed. */
5004 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
5009 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
5017 if (!REG_MATCH_NULL_STRING_P (reg_info[*p1]))
5025 /* All other opcodes mean we cannot match the empty string. */
5031 } /* common_op_match_null_string_p */
5034 /* Return zero if TRANSLATE[S1] and TRANSLATE[S2] are identical for LEN
5035 bytes; nonzero otherwise. */
5038 bcmp_translate (s1, s2, len, translate)
5039 unsigned char *s1, *s2;
5043 register unsigned char *p1 = s1, *p2 = s2;
5046 if (translate[*p1++] != translate[*p2++]) return 1;
5052 /* Entry points for GNU code. */
5054 /* re_compile_pattern is the GNU regular expression compiler: it
5055 compiles PATTERN (of length SIZE) and puts the result in BUFP.
5056 Returns 0 if the pattern was valid, otherwise an error string.
5058 Assumes the `allocated' (and perhaps `buffer') and `translate' fields
5059 are set in BUFP on entry.
5061 We call regex_compile to do the actual compilation. */
5064 re_compile_pattern (pattern, length, bufp)
5065 const char *pattern;
5067 struct re_pattern_buffer *bufp;
5071 /* GNU code is written to assume at least RE_NREGS registers will be set
5072 (and at least one extra will be -1). */
5073 bufp->regs_allocated = REGS_UNALLOCATED;
5075 /* And GNU code determines whether or not to get register information
5076 by passing null for the REGS argument to re_match, etc., not by
5080 /* Match anchors at newline. */
5081 bufp->newline_anchor = 1;
5083 ret = regex_compile (pattern, length, re_syntax_options, bufp);
5087 return gettext (re_error_msgid[(int) ret]);
5090 /* Entry points compatible with 4.2 BSD regex library. We don't define
5091 them unless specifically requested. */
5093 #ifdef _REGEX_RE_COMP
5095 /* BSD has one and only one pattern buffer. */
5096 static struct re_pattern_buffer re_comp_buf;
5106 if (!re_comp_buf.buffer)
5107 return gettext ("No previous regular expression");
5111 if (!re_comp_buf.buffer)
5113 re_comp_buf.buffer = (unsigned char *) malloc (200);
5114 if (re_comp_buf.buffer == NULL)
5115 return gettext (re_error_msgid[(int) REG_ESPACE]);
5116 re_comp_buf.allocated = 200;
5118 re_comp_buf.fastmap = (char *) malloc (1 << BYTEWIDTH);
5119 if (re_comp_buf.fastmap == NULL)
5120 return gettext (re_error_msgid[(int) REG_ESPACE]);
5123 /* Since `re_exec' always passes NULL for the `regs' argument, we
5124 don't need to initialize the pattern buffer fields which affect it. */
5126 /* Match anchors at newlines. */
5127 re_comp_buf.newline_anchor = 1;
5129 ret = regex_compile (s, strlen (s), re_syntax_options, &re_comp_buf);
5134 /* Yes, we're discarding `const' here if !HAVE_LIBINTL. */
5135 return (char *) gettext (re_error_msgid[(int) ret]);
5143 const int len = strlen (s);
5145 0 <= re_search (&re_comp_buf, s, len, 0, len, (struct re_registers *) 0);
5147 #endif /* _REGEX_RE_COMP */
5149 /* POSIX.2 functions. Don't define these for Emacs. */
5153 /* regcomp takes a regular expression as a string and compiles it.
5155 PREG is a regex_t *. We do not expect any fields to be initialized,
5156 since POSIX says we shouldn't. Thus, we set
5158 `buffer' to the compiled pattern;
5159 `used' to the length of the compiled pattern;
5160 `syntax' to RE_SYNTAX_POSIX_EXTENDED if the
5161 REG_EXTENDED bit in CFLAGS is set; otherwise, to
5162 RE_SYNTAX_POSIX_BASIC;
5163 `newline_anchor' to REG_NEWLINE being set in CFLAGS;
5164 `fastmap' and `fastmap_accurate' to zero;
5165 `re_nsub' to the number of subexpressions in PATTERN.
5167 PATTERN is the address of the pattern string.
5169 CFLAGS is a series of bits which affect compilation.
5171 If REG_EXTENDED is set, we use POSIX extended syntax; otherwise, we
5172 use POSIX basic syntax.
5174 If REG_NEWLINE is set, then . and [^...] don't match newline.
5175 Also, regexec will try a match beginning after every newline.
5177 If REG_ICASE is set, then we considers upper- and lowercase
5178 versions of letters to be equivalent when matching.
5180 If REG_NOSUB is set, then when PREG is passed to regexec, that
5181 routine will report only success or failure, and nothing about the
5184 It returns 0 if it succeeds, nonzero if it doesn't. (See regex.h for
5185 the return codes and their meanings.) */
5188 regcomp (preg, pattern, cflags)
5190 const char *pattern;
5195 = (cflags & REG_EXTENDED) ?
5196 RE_SYNTAX_POSIX_EXTENDED : RE_SYNTAX_POSIX_BASIC;
5198 /* regex_compile will allocate the space for the compiled pattern. */
5200 preg->allocated = 0;
5203 /* Don't bother to use a fastmap when searching. This simplifies the
5204 REG_NEWLINE case: if we used a fastmap, we'd have to put all the
5205 characters after newlines into the fastmap. This way, we just try
5209 if (cflags & REG_ICASE)
5213 preg->translate = (char *) malloc (CHAR_SET_SIZE);
5214 if (preg->translate == NULL)
5215 return (int) REG_ESPACE;
5217 /* Map uppercase characters to corresponding lowercase ones. */
5218 for (i = 0; i < CHAR_SET_SIZE; i++)
5219 preg->translate[i] = ISUPPER (i) ? tolower (i) : i;
5222 preg->translate = NULL;
5224 /* If REG_NEWLINE is set, newlines are treated differently. */
5225 if (cflags & REG_NEWLINE)
5226 { /* REG_NEWLINE implies neither . nor [^...] match newline. */
5227 syntax &= ~RE_DOT_NEWLINE;
5228 syntax |= RE_HAT_LISTS_NOT_NEWLINE;
5229 /* It also changes the matching behavior. */
5230 preg->newline_anchor = 1;
5233 preg->newline_anchor = 0;
5235 preg->no_sub = !!(cflags & REG_NOSUB);
5237 /* POSIX says a null character in the pattern terminates it, so we
5238 can use strlen here in compiling the pattern. */
5239 ret = regex_compile (pattern, strlen (pattern), syntax, preg);
5241 /* POSIX doesn't distinguish between an unmatched open-group and an
5242 unmatched close-group: both are REG_EPAREN. */
5243 if (ret == REG_ERPAREN) ret = REG_EPAREN;
5249 /* regexec searches for a given pattern, specified by PREG, in the
5252 If NMATCH is zero or REG_NOSUB was set in the cflags argument to
5253 `regcomp', we ignore PMATCH. Otherwise, we assume PMATCH has at
5254 least NMATCH elements, and we set them to the offsets of the
5255 corresponding matched substrings.
5257 EFLAGS specifies `execution flags' which affect matching: if
5258 REG_NOTBOL is set, then ^ does not match at the beginning of the
5259 string; if REG_NOTEOL is set, then $ does not match at the end.
5261 We return 0 if we find a match and REG_NOMATCH if not. */
5264 regexec (preg, string, nmatch, pmatch, eflags)
5265 const regex_t *preg;
5268 regmatch_t pmatch[];
5272 struct re_registers regs;
5273 regex_t private_preg;
5274 int len = strlen (string);
5275 boolean want_reg_info = !preg->no_sub && nmatch > 0;
5277 private_preg = *preg;
5279 private_preg.not_bol = !!(eflags & REG_NOTBOL);
5280 private_preg.not_eol = !!(eflags & REG_NOTEOL);
5282 /* The user has told us exactly how many registers to return
5283 information about, via `nmatch'. We have to pass that on to the
5284 matching routines. */
5285 private_preg.regs_allocated = REGS_FIXED;
5289 regs.num_regs = nmatch;
5290 regs.start = TALLOC (nmatch, regoff_t);
5291 regs.end = TALLOC (nmatch, regoff_t);
5292 if (regs.start == NULL || regs.end == NULL)
5293 return (int) REG_NOMATCH;
5296 /* Perform the searching operation. */
5297 ret = re_search (&private_preg, string, len,
5298 /* start: */ 0, /* range: */ len,
5299 want_reg_info ? ®s : (struct re_registers *) 0);
5301 /* Copy the register information to the POSIX structure. */
5308 for (r = 0; r < nmatch; r++)
5310 pmatch[r].rm_so = regs.start[r];
5311 pmatch[r].rm_eo = regs.end[r];
5315 /* If we needed the temporary register info, free the space now. */
5320 /* We want zero return to mean success, unlike `re_search'. */
5321 return ret >= 0 ? (int) REG_NOERROR : (int) REG_NOMATCH;
5325 /* Returns a message corresponding to an error code, ERRCODE, returned
5326 from either regcomp or regexec. We don't use PREG here. */
5329 regerror (errcode, preg, errbuf, errbuf_size)
5331 const regex_t *preg;
5339 || errcode >= (sizeof (re_error_msgid) / sizeof (re_error_msgid[0])))
5340 /* Only error codes returned by the rest of the code should be passed
5341 to this routine. If we are given anything else, or if other regex
5342 code generates an invalid error code, then the program has a bug.
5343 Dump core so we can fix it. */
5346 msg = gettext (re_error_msgid[errcode]);
5348 msg_size = strlen (msg) + 1; /* Includes the null. */
5350 if (errbuf_size != 0)
5352 if (msg_size > errbuf_size)
5354 strncpy (errbuf, msg, errbuf_size - 1);
5355 errbuf[errbuf_size - 1] = 0;
5358 strcpy (errbuf, msg);
5365 /* Free dynamically allocated space used by PREG. */
5371 if (preg->buffer != NULL)
5372 free (preg->buffer);
5373 preg->buffer = NULL;
5375 preg->allocated = 0;
5378 if (preg->fastmap != NULL)
5379 free (preg->fastmap);
5380 preg->fastmap = NULL;
5381 preg->fastmap_accurate = 0;
5383 if (preg->translate != NULL)
5384 free (preg->translate);
5385 preg->translate = NULL;
5388 #endif /* not emacs */
5392 make-backup-files: t
5394 trim-versions-without-asking: nil