+# Don't use Texinfo's @acronym{}.
+# http://lists.gnu.org/archive/html/bug-gnulib/2010-03/msg00321.html
+texinfo_suffix_re_ ?= \.(txi|texi(nfo)?)$$
+sc_texinfo_acronym:
+ @prohibit='@acronym\{' \
+ in_vc_files='$(texinfo_suffix_re_)' \
+ halt='found use of Texinfo @acronym{}' \
+ $(_sc_search_regexp)
+
+cvs_keywords = \
+ Author|Date|Header|Id|Name|Locker|Log|RCSfile|Revision|Source|State
+
+sc_prohibit_cvs_keyword:
+ @prohibit='\$$($(cvs_keywords))\$$' \
+ halt='do not use CVS keyword expansion' \
+ $(_sc_search_regexp)
+
+# This Perl code is slightly obfuscated. Not only is each "$" doubled
+# because it's in a Makefile, but the $$c's are comments; we cannot
+# use "#" due to the way the script ends up concatenated onto one line.
+# It would be much more concise, and would produce better output (including
+# counts) if written as:
+# perl -ln -0777 -e '/\n(\n+)$/ and print "$ARGV: ".length $1' ...
+# but that would be far less efficient, reading the entire contents
+# of each file, rather than just the last two bytes of each.
+# In addition, while the code below detects both blank lines and a missing
+# newline at EOF, the above detects only the former.
+#
+# This is a perl script that is expected to be the single-quoted argument
+# to a command-line "-le". The remaining arguments are file names.
+# Print the name of each file that ends in exactly one newline byte.
+# I.e., warn if there are blank lines (2 or more newlines), or if the
+# last byte is not a newline. However, currently we don't complain
+# about any file that contains exactly one byte.
+# Exit nonzero if at least one such file is found, otherwise, exit 0.
+# Warn about, but otherwise ignore open failure. Ignore seek/read failure.
+#
+# Use this if you want to remove trailing empty lines from selected files:
+# perl -pi -0777 -e 's/\n\n+$/\n/' files...
+#
+require_exactly_one_NL_at_EOF_ = \
+ foreach my $$f (@ARGV) \
+ { \
+ open F, "<", $$f or (warn "failed to open $$f: $$!\n"), next; \
+ my $$p = sysseek (F, -2, 2); \
+ my $$c = "seek failure probably means file has < 2 bytes; ignore"; \
+ my $$last_two_bytes; \
+ defined $$p and $$p = sysread F, $$last_two_bytes, 2; \
+ close F; \
+ $$c = "ignore read failure"; \
+ $$p && ($$last_two_bytes eq "\n\n" \
+ || substr ($$last_two_bytes,1) ne "\n") \
+ and (print $$f), $$fail=1; \
+ } \
+ END { exit defined $$fail }
+sc_prohibit_empty_lines_at_EOF:
+ @perl -le '$(require_exactly_one_NL_at_EOF_)' $$($(VC_LIST_EXCEPT)) \
+ || { echo '$(ME): empty line(s) or no newline at EOF' \
+ 1>&2; exit 1; } || :
+
+# Make sure we don't use st_blocks. Use ST_NBLOCKS instead.
+# This is a bit of a kludge, since it prevents use of the string
+# even in comments, but for now it does the job with no false positives.
+sc_prohibit_stat_st_blocks:
+ @prohibit='[.>]st_blocks' \
+ halt='do not use st_blocks; use ST_NBLOCKS' \
+ $(_sc_search_regexp)
+
+# Make sure we don't define any S_IS* macros in src/*.c files.
+# They're already defined via gnulib's sys/stat.h replacement.
+sc_prohibit_S_IS_definition:
+ @prohibit='^ *# *define *S_IS' \
+ halt='do not define S_IS* macros; include <sys/stat.h>' \
+ $(_sc_search_regexp)
+
+# Perl block to convert a match to FILE_NAME:LINENO:TEST,
+# that is shared by two definitions below.
+perl_filename_lineno_text_ = \
+ -e ' {' \
+ -e ' $$n = ($$` =~ tr/\n/\n/ + 1);' \
+ -e ' ($$v = $$&) =~ s/\n/\\n/g;' \
+ -e ' print "$$ARGV:$$n:$$v\n";' \
+ -e ' }'
+
+prohibit_doubled_word_RE_ ?= \
+ /\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt]o)\s+\1\b/gims
+prohibit_doubled_word_ = \
+ -e 'while ($(prohibit_doubled_word_RE_))' \
+ $(perl_filename_lineno_text_)
+
+# Define this to a regular expression that matches
+# any filename:dd:match lines you want to ignore.
+# The default is to ignore no matches.
+ignore_doubled_word_match_RE_ ?= ^$$
+
+sc_prohibit_doubled_word:
+ @perl -n -0777 $(prohibit_doubled_word_) $$($(VC_LIST_EXCEPT)) \
+ | grep -vE '$(ignore_doubled_word_match_RE_)' \
+ | grep . && { echo '$(ME): doubled words' 1>&2; exit 1; } || :
+
+# A regular expression matching undesirable combinations of words like
+# "can not"; this matches them even when the two words appear on different
+# lines, but not when there is an intervening delimiter like "#" or "*".
+prohibit_undesirable_word_seq_RE_ ?= \
+ /\bcan\s+not\b/gims
+prohibit_undesirable_word_seq_ = \
+ -e 'while ($(prohibit_undesirable_word_seq_RE_))' \
+ $(perl_filename_lineno_text_)
+# Define this to a regular expression that matches
+# any filename:dd:match lines you want to ignore.
+# The default is to ignore no matches.
+ignore_undesirable_word_sequence_RE_ ?= ^$$
+
+sc_prohibit_undesirable_word_seq:
+ @perl -n -0777 $(prohibit_undesirable_word_seq_) \
+ $$($(VC_LIST_EXCEPT)) \
+ | grep -vE '$(ignore_undesirable_word_sequence_RE_)' | grep . \
+ && { echo '$(ME): undesirable word sequence' >&2; exit 1; } || :
+
+_ptm1 = use "test C1 && test C2", not "test C1 -''a C2"
+_ptm2 = use "test C1 || test C2", not "test C1 -''o C2"
+# Using test's -a and -o operators is not portable.
+# We prefer test over [, since the latter is spelled [[ in configure.ac.
+sc_prohibit_test_minus_ao:
+ @prohibit='(\<test| \[+) .+ -[ao] ' \
+ halt='$(_ptm1); $(_ptm2)' \
+ $(_sc_search_regexp)
+
+# Avoid a test bashism.
+sc_prohibit_test_double_equal:
+ @prohibit='(\<test| \[+) .+ == ' \
+ containing='#! */bin/[a-z]*sh' \
+ halt='use "test x = x", not "test x =''= x"' \
+ $(_sc_search_regexp)
+
+# Each program that uses proper_name_utf8 must link with one of the
+# ICONV libraries. Otherwise, some ICONV library must appear in LDADD.
+# The perl -0777 invocation below extracts the possibly-multi-line
+# definition of LDADD from the appropriate Makefile.am and exits 0
+# when it contains "ICONV".
+sc_proper_name_utf8_requires_ICONV:
+ @progs=$$(grep -l 'proper_name_utf8 ''("' $$($(VC_LIST_EXCEPT)));\
+ if test "x$$progs" != x; then \
+ fail=0; \
+ for p in $$progs; do \
+ dir=$$(dirname "$$p"); \
+ perl -0777 \
+ -ne 'exit !(/^LDADD =(.+?[^\\]\n)/ms && $$1 =~ /ICONV/)' \
+ $$dir/Makefile.am && continue; \
+ base=$$(basename "$$p" .c); \
+ grep "$${base}_LDADD.*ICONV)" $$dir/Makefile.am > /dev/null \
+ || { fail=1; echo 1>&2 "$(ME): $$p uses proper_name_utf8"; }; \
+ done; \
+ test $$fail = 1 && \
+ { echo 1>&2 '$(ME): the above do not link with any ICONV library'; \
+ exit 1; } || :; \
+ fi
+
+# Warn about "c0nst struct Foo const foo[]",
+# but not about "char const *const foo" or "#define const const".
+sc_redundant_const:
+ @prohibit='\bconst\b[[:space:][:alnum:]]{2,}\bconst\b' \
+ halt='redundant "const" in declarations' \
+ $(_sc_search_regexp)
+
+sc_const_long_option:
+ @grep '^ *static.*struct option ' $$($(VC_LIST_EXCEPT)) \
+ | grep -Ev 'const struct option|struct option const' && { \
+ echo 1>&2 '$(ME): add "const" to the above declarations'; \
+ exit 1; } || :
+
+NEWS_hash = \
+ $$(sed -n '/^\*.* $(PREV_VERSION_REGEXP) ([0-9-]*)/,$$p' \
+ $(srcdir)/NEWS \
+ | perl -0777 -pe \
+ 's/^Copyright.+?Free\sSoftware\sFoundation,\sInc\.\n//ms' \
+ | md5sum - \
+ | sed 's/ .*//')
+
+# Ensure that we don't accidentally insert an entry into an old NEWS block.
+sc_immutable_NEWS:
+ @if test -f $(srcdir)/NEWS; then \
+ test "$(NEWS_hash)" = '$(old_NEWS_hash)' && : || \
+ { echo '$(ME): you have modified old NEWS' 1>&2; exit 1; }; \
+ fi
+
+# Update the hash stored above. Do this after each release and
+# for any corrections to old entries.
+update-NEWS-hash: NEWS
+ perl -pi -e 's/^(old_NEWS_hash[ \t]+:?=[ \t]+).*/$${1}'"$(NEWS_hash)/" \
+ $(srcdir)/cfg.mk
+
+# Ensure that we use only the standard $(VAR) notation,
+# not @...@ in Makefile.am, now that we can rely on automake
+# to emit a definition for each substituted variable.
+# However, there is still one case in which @VAR@ use is not just
+# legitimate, but actually required: when augmenting an automake-defined
+# variable with a prefix. For example, gettext uses this:
+# MAKEINFO = env LANG= LC_MESSAGES= LC_ALL= LANGUAGE= @MAKEINFO@
+# otherwise, makeinfo would put German or French (current locale)
+# navigation hints in the otherwise-English documentation.
+#
+# Allow the package to add exceptions via a hook in cfg.mk;
+# for example, @PRAGMA_SYSTEM_HEADER@ can be permitted by
+# setting this to ' && !/PRAGMA_SYSTEM_HEADER/'.
+_makefile_at_at_check_exceptions ?=
+sc_makefile_at_at_check:
+ @perl -ne '/\@[A-Z_0-9]+\@/' \
+ -e ' && !/([A-Z_0-9]+)\s+=.*\@\1\@$$/' \
+ -e ''$(_makefile_at_at_check_exceptions) \
+ -e 'and (print "$$ARGV:$$.: $$_"), $$m=1; END {exit !$$m}' \
+ $$($(VC_LIST_EXCEPT) | grep -E '(^|/)(Makefile\.am|[^/]+\.mk)$$') \
+ && { echo '$(ME): use $$(...), not @...@' 1>&2; exit 1; } || :
+
+news-check: NEWS
+ if sed -n $(news-check-lines-spec)p $(srcdir)/NEWS \
+ | grep -E $(news-check-regexp) >/dev/null; then \
+ :; \
+ else \
+ echo 'NEWS: $$(news-check-regexp) failed to match' 1>&2; \
+ exit 1; \
+ fi
+
+sc_makefile_TAB_only_indentation:
+ @prohibit='^ [ ]{8}' \
+ in_vc_files='akefile|\.mk$$' \
+ halt='found TAB-8-space indentation' \
+ $(_sc_search_regexp)
+
+sc_m4_quote_check:
+ @prohibit='(AC_DEFINE(_UNQUOTED)?|AC_DEFUN)\([^[]' \
+ in_vc_files='(^configure\.ac|\.m4)$$' \
+ halt='quote the first arg to AC_DEF*' \
+ $(_sc_search_regexp)
+
+fix_po_file_diag = \
+'you have changed the set of files with translatable diagnostics;\n\
+apply the above patch\n'
+
+# Verify that all source files using _() are listed in po/POTFILES.in.
+po_file ?= $(srcdir)/po/POTFILES.in
+generated_files ?= $(srcdir)/lib/*.[ch]
+sc_po_check:
+ @if test -f $(po_file); then \
+ grep -E -v '^(#|$$)' $(po_file) \
+ | grep -v '^src/false\.c$$' | sort > $@-1; \
+ files=; \
+ for file in $$($(VC_LIST_EXCEPT)) $(generated_files); do \
+ test -r $$file || continue; \
+ case $$file in \
+ *.m4|*.mk) continue ;; \
+ *.?|*.??) ;; \
+ *) continue;; \
+ esac; \
+ case $$file in \
+ *.[ch]) \
+ base=`expr " $$file" : ' \(.*\)\..'`; \
+ { test -f $$base.l || test -f $$base.y; } && continue;; \
+ esac; \
+ files="$$files $$file"; \
+ done; \
+ grep -E -l '\b(N?_|gettext *)\([^)"]*("|$$)' $$files \
+ | sed 's|^$(_dot_escaped_srcdir)/||' | sort -u > $@-2; \
+ diff -u -L $(po_file) -L $(po_file) $@-1 $@-2 \
+ || { printf '$(ME): '$(fix_po_file_diag) 1>&2; exit 1; }; \
+ rm -f $@-1 $@-2; \
+ fi
+
+# Sometimes it is useful to change the PATH environment variable
+# in Makefiles. When doing so, it's better not to use the Unix-centric
+# path separator of `:', but rather the automake-provided `$(PATH_SEPARATOR)'.
+msg = '$(ME): Do not use `:'\'' above; use $$(PATH_SEPARATOR) instead'
+sc_makefile_path_separator_check:
+ @prohibit='PATH[=].*:' \
+ in_vc_files='akefile|\.mk$$' \
+ halt=$(msg) \
+ $(_sc_search_regexp)
+
+# Check that `make alpha' will not fail at the end of the process.
+writable-files:
+ if test -d $(release_archive_dir); then :; else \
+ for file in $(distdir).tar.gz \
+ $(release_archive_dir)/$(distdir).tar.gz; do \
+ test -e $$file || continue; \
+ test -w $$file \
+ || { echo ERROR: $$file is not writable; fail=1; }; \
+ done; \
+ test "$$fail" && exit 1 || : ; \
+ fi
+
+v_etc_file = $(gnulib_dir)/lib/version-etc.c
+sample-test = tests/sample-test
+texi = doc/$(PACKAGE).texi
+# Make sure that the copyright date in $(v_etc_file) is up to date.
+# Do the same for the $(sample-test) and the main doc/.texi file.
+sc_copyright_check:
+ @require='enum { COPYRIGHT_YEAR = '$$(date +%Y)' };' \
+ in_files=$(v_etc_file) \
+ halt='out of date copyright in $(v_etc_file); update it' \
+ $(_sc_search_regexp)
+ @require='# Copyright \(C\) '$$(date +%Y)' Free' \
+ in_vc_files=$(sample-test) \
+ halt='out of date copyright in $(sample-test); update it' \
+ $(_sc_search_regexp)
+ @require='Copyright @copyright\{\} .*'$$(date +%Y)' Free' \
+ in_vc_files=$(texi) \
+ halt='out of date copyright in $(texi); update it' \
+ $(_sc_search_regexp)
+
+# If tests/help-version exists and seems to be new enough, assume that its
+# use of init.sh and path_prepend_ is correct, and ensure that every other
+# use of init.sh is identical.
+# This is useful because help-version cross-checks prog --version
+# with $(VERSION), which verifies that its path_prepend_ invocation
+# sets PATH correctly. This is an inexpensive way to ensure that
+# the other init.sh-using tests also get it right.
+_hv_file ?= $(srcdir)/tests/help-version
+_hv_regex_weak ?= ^ *\. .*/init\.sh"
+# Fix syntax-highlighters "
+_hv_regex_strong ?= ^ *\. "\$${srcdir=\.}/init\.sh"
+sc_cross_check_PATH_usage_in_tests:
+ @if test -f $(_hv_file); then \
+ grep -l 'VERSION mismatch' $(_hv_file) >/dev/null \
+ || { echo "$@: skipped: no such file: $(_hv_file)" 1>&2; \
+ exit 0; }; \
+ grep -lE '$(_hv_regex_strong)' $(_hv_file) >/dev/null \
+ || { echo "$@: $(_hv_file) lacks conforming use of init.sh" 1>&2; \
+ exit 1; }; \
+ good=$$(grep -E '$(_hv_regex_strong)' $(_hv_file)); \
+ grep -LFx "$$good" \
+ $$(grep -lE '$(_hv_regex_weak)' $$($(VC_LIST_EXCEPT))) \
+ | grep . && \
+ { echo "$(ME): the above files use path_prepend_ inconsistently" \
+ 1>&2; exit 1; } || :; \
+ fi
+
+# #if HAVE_... will evaluate to false for any non numeric string.
+# That would be flagged by using -Wundef, however gnulib currently
+# tests many undefined macros, and so we can't enable that option.
+# So at least preclude common boolean strings as macro values.
+sc_Wundef_boolean:
+ @prohibit='^#define.*(yes|no|true|false)$$' \
+ in_files='$(CONFIG_INCLUDE)' \
+ halt='Use 0 or 1 for macro values' \
+ $(_sc_search_regexp)
+
+# Even if you use pathmax.h to guarantee that PATH_MAX is defined, it might
+# not be constant, or might overflow a stack. In general, use PATH_MAX as
+# a limit, not an array or alloca size.
+sc_prohibit_path_max_allocation:
+ @prohibit='(\balloca *\([^)]*|\[[^]]*)PATH_MAX' \
+ halt='Avoid stack allocations of size PATH_MAX' \
+ $(_sc_search_regexp)
+
+sc_vulnerable_makefile_CVE-2009-4029:
+ @prohibit='perm -777 -exec chmod a\+rwx|chmod 777 \$$\(distdir\)' \
+ in_files=$$(find $(srcdir) -name Makefile.in) \
+ halt=$$(printf '%s\n' \
+ 'the above files are vulnerable; beware of running' \
+ ' "make dist*" rules, and upgrade to fixed automake' \
+ ' see http://bugzilla.redhat.com/542609 for details') \
+ $(_sc_search_regexp)
+
+vc-diff-check:
+ (unset CDPATH; cd $(srcdir) && $(VC) diff) > vc-diffs || :
+ if test -s vc-diffs; then \
+ cat vc-diffs; \
+ echo "Some files are locally modified:" 1>&2; \
+ exit 1; \
+ else \
+ rm vc-diffs; \
+ fi
+
+rel-files = $(DIST_ARCHIVES)
+
+gnulib_dir ?= $(srcdir)/gnulib
+gnulib-version = $$(cd $(gnulib_dir) && git describe)
+bootstrap-tools ?= autoconf,automake,gnulib
+
+# If it's not already specified, derive the GPG key ID from
+# the signed tag we've just applied to mark this release.
+gpg_key_ID ?= \
+ $$(git cat-file tag v$(VERSION) > .ann-sig \
+ && gpgv .ann-sig - < /dev/null 2>&1 \
+ | sed -n '/.*key ID \([0-9A-F]*\)/s//\1/p'; rm -f .ann-sig)
+
+translation_project_ ?= coordinator@translationproject.org
+
+# Make info-gnu the default only for a stable release.
+ifeq ($(RELEASE_TYPE),stable)
+ announcement_Cc_ ?= $(translation_project_), $(PACKAGE_BUGREPORT)
+ announcement_mail_headers_ ?= \
+ To: info-gnu@gnu.org \
+ Cc: $(announcement_Cc_) \
+ Mail-Followup-To: $(PACKAGE_BUGREPORT)
+else
+ announcement_Cc_ ?= $(translation_project_)
+ announcement_mail_headers_ ?= \
+ To: $(PACKAGE_BUGREPORT) \
+ Cc: $(announcement_Cc_)
+endif
+
+announcement: NEWS ChangeLog $(rel-files)
+ @$(build_aux)/announce-gen \
+ --mail-headers='$(announcement_mail_headers_)' \
+ --release-type=$(RELEASE_TYPE) \
+ --package=$(PACKAGE) \
+ --prev=$(PREV_VERSION) \
+ --curr=$(VERSION) \
+ --gpg-key-id=$(gpg_key_ID) \
+ --news=$(srcdir)/NEWS \
+ --bootstrap-tools=$(bootstrap-tools) \
+ --gnulib-version=$(gnulib-version) \
+ --no-print-checksums \
+ $(addprefix --url-dir=, $(url_dir_list))
+
+## ---------------- ##
+## Updating files. ##
+## ---------------- ##
+
+ftp-gnu = ftp://ftp.gnu.org/gnu
+www-gnu = http://www.gnu.org
+
+upload_dest_dir_ ?= $(PACKAGE)
+emit_upload_commands:
+ @echo =====================================
+ @echo =====================================
+ @echo "$(build_aux)/gnupload $(GNUPLOADFLAGS) \\"
+ @echo " --to $(gnu_rel_host):$(upload_dest_dir_) \\"
+ @echo " $(rel-files)"
+ @echo '# send the ~/announce-$(my_distdir) e-mail'
+ @echo =====================================
+ @echo =====================================
+
+define emit-commit-log
+ printf '%s\n' 'maint: post-release administrivia' '' \
+ '* NEWS: Add header line for next release.' \
+ '* .prev-version: Record previous version.' \
+ '* cfg.mk (old_NEWS_hash): Auto-update.'
+endef
+
+.PHONY: no-submodule-changes
+no-submodule-changes:
+ if test -d $(srcdir)/.git; then \
+ diff=$$(cd $(srcdir) && git submodule -q foreach \
+ git diff-index --name-only HEAD) \
+ || exit 1; \
+ case $$diff in '') ;; \
+ *) echo '$(ME): submodule files are locally modified:'; \
+ echo "$$diff"; exit 1;; esac; \
+ else \
+ : ; \
+ fi
+
+submodule-checks ?= no-submodule-changes public-submodule-commit
+
+# Ensure that each sub-module commit we're using is public.
+# Without this, it is too easy to tag and release code that
+# cannot be built from a fresh clone.
+.PHONY: public-submodule-commit
+public-submodule-commit:
+ $(AM_V_GEN)if test -d $(srcdir)/.git; then \
+ cd $(srcdir) && \
+ git submodule --quiet foreach test '$$(git rev-parse $$sha1)' \
+ = '$$(git merge-base origin $$sha1)' \
+ || { echo '$(ME): found non-public submodule commit' >&2; \
+ exit 1; }; \
+ else \
+ : ; \
+ fi
+# This rule has a high enough utility/cost ratio that it should be a
+# dependent of "check" by default. However, some of us do occasionally
+# commit a temporary change that deliberately points to a non-public
+# submodule commit, and want to be able to use rules like "make check".
+# In that case, run e.g., "make check gl_public_submodule_commit="
+# to disable this test.
+gl_public_submodule_commit ?= public-submodule-commit
+check: $(gl_public_submodule_commit)
+
+.PHONY: alpha beta stable
+ALL_RECURSIVE_TARGETS += alpha beta stable
+alpha beta stable: $(local-check) writable-files $(submodule-checks)
+ test $@ = stable \
+ && { echo $(VERSION) | grep -E '^[0-9]+(\.[0-9]+)+$$' \
+ || { echo "invalid version string: $(VERSION)" 1>&2; exit 1;};}\
+ || :
+ $(MAKE) vc-diff-check
+ $(MAKE) news-check
+ $(MAKE) distcheck
+ $(MAKE) dist XZ_OPT=-9ev
+ $(MAKE) $(release-prep-hook) RELEASE_TYPE=$@
+ $(MAKE) -s emit_upload_commands RELEASE_TYPE=$@
+
+# Override this in cfg.mk if you follow different procedures.
+release-prep-hook ?= release-prep
+
+gl_noteworthy_news_ = * Noteworthy changes in release ?.? (????-??-??) [?]
+.PHONY: release-prep
+release-prep:
+ case $$RELEASE_TYPE in alpha|beta|stable) ;; \
+ *) echo "invalid RELEASE_TYPE: $$RELEASE_TYPE" 1>&2; exit 1;; esac
+ $(MAKE) --no-print-directory -s announcement > ~/announce-$(my_distdir)
+ if test -d $(release_archive_dir); then \
+ ln $(rel-files) $(release_archive_dir); \
+ chmod a-w $(rel-files); \
+ fi
+ echo $(VERSION) > $(prev_version_file)
+ $(MAKE) update-NEWS-hash
+ perl -pi -e '$$. == 3 and print "$(gl_noteworthy_news_)\n\n\n"' NEWS
+ $(emit-commit-log) > .ci-msg
+ $(VC) commit -F .ci-msg -a
+ rm .ci-msg
+
+# Override this with e.g., -s $(srcdir)/some_other_name.texi
+# if the default $(PACKAGE)-derived name doesn't apply.
+gendocs_options_ ?=
+
+.PHONY: web-manual
+web-manual:
+ @test -z "$(manual_title)" \
+ && { echo define manual_title in cfg.mk 1>&2; exit 1; } || :
+ @cd '$(srcdir)/doc'; \
+ $(SHELL) ../build-aux/gendocs.sh $(gendocs_options_) \
+ -o '$(abs_builddir)/doc/manual' \
+ --email $(PACKAGE_BUGREPORT) $(PACKAGE) \
+ "$(PACKAGE_NAME) - $(manual_title)"
+ @echo " *** Upload the doc/manual directory to web-cvs."