#!/bin/sh
# gendocs.sh -- generate a GNU manual in many formats. This script is
# mentioned in maintain.texi. See the help message below for usage details.
-# $Id: gendocs.sh,v 1.1 2006-07-12 07:27:31 jas Exp $
-#
-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+
+scriptversion=2007-10-24.16
+
+# Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# the Free Software Foundation; either version 3 of the License,
+# or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can either send email to this
-# program's maintainer or write to: The Free Software Foundation,
-# Inc.; 51 Franklin Street, Fifth Floor; Boston, MA 02110-1301, USA.
-#
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
# Original author: Mohit Agarwal.
# Send bug reports and any other correspondence to bug-texinfo@gnu.org.
scripturl="http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/texinfo/texinfo/util/gendocs.sh"
templateurl="http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/texinfo/texinfo/util/gendocs_template"
+: ${SETLANG="env LANG= LC_MESSAGES= LC_ALL= LANGUAGE="}
: ${MAKEINFO="makeinfo"}
: ${TEXI2DVI="texi2dvi -t @finalout"}
: ${DVIPS="dvips"}
-: ${DOCBOOK2TXT="docbook2txt"}
: ${DOCBOOK2HTML="docbook2html"}
: ${DOCBOOK2PDF="docbook2pdf"}
: ${DOCBOOK2PS="docbook2ps"}
+: ${DOCBOOK2TXT="docbook2txt"}
: ${GENDOCS_TEMPLATE_DIR="."}
+: ${TEXI2HTML="texi2html"}
unset CDPATH
+unset use_texi2html
-rcs_revision='$Revision: 1.1 $'
-rcs_version=`set - $rcs_revision; echo $2`
-program=`echo "$0" | sed -e 's!.*/!!'`
-version="gendocs.sh $rcs_version
+version="gendocs.sh $scriptversion
-Copyright (C) 2006 Free Software Foundation, Inc.
+Copyright (C) 2007 Free Software Foundation, Inc.
There is NO warranty. You may redistribute this software
under the terms of the GNU General Public License.
For more information about these matters, see the files named COPYING."
Options:
-o OUTDIR write files into OUTDIR, instead of manual/.
--docbook convert to DocBook too (xml, txt, html, pdf and ps).
- --html ARG pass indicated ARG to makeinfo for HTML targets.
+ --html ARG pass indicated ARG to makeinfo or texi2html for HTML targets.
+ --texi2html use texi2html to generate HTML targets.
--help display this help and exit successfully.
--version display version information and exit successfully.
directory with -o each time. Then write (by hand) an overall index.html
with links to them all.
+If a manual's texinfo sources are spread across several directories,
+first copy or symlink all Texinfo sources into a single directory.
+(Part of the script's work is to make a tar.gz of the sources.)
+
You can set the environment variables MAKEINFO, TEXI2DVI, and DVIPS to
control the programs that get executed, and GENDOCS_TEMPLATE_DIR to
-control where the gendocs_template file is looked for.
+control where the gendocs_template file is looked for. (With --docbook,
+the environment variables DOCBOOK2HTML, DOCBOOK2PDF, DOCBOOK2PS, and
+DOCBOOK2TXT are also respected.)
+
+By default, makeinfo is run in the default (English) locale, since
+that's the language of most Texinfo manuals. If you happen to have a
+non-English manual and non-English web site, check the SETLANG setting
+in the source.
Email bug reports or enhancement requests to bug-texinfo@gnu.org.
"
-o) shift; outdir=$1;;
--docbook) docbook=yes;;
--html) shift; html=$1;;
+ --texi2html) use_texi2html=1
+ html="$html --node-files";;
-*)
echo "$0: Unknown or ambiguous option \`$1'." >&2
echo "$0: Try \`--help' for more information." >&2
echo Generating output formats for $srcfile
-cmd="${MAKEINFO} -o $PACKAGE.info \"$srcfile\""
+cmd="$SETLANG $MAKEINFO -o $PACKAGE.info \"$srcfile\""
echo "Generating info files... ($cmd)"
eval "$cmd"
mkdir -p $outdir/
pdf_size=`calcsize $PACKAGE.pdf`
mv $PACKAGE.pdf $outdir/
-cmd="${MAKEINFO} -o $PACKAGE.txt --no-split --no-headers \"$srcfile\""
+cmd="$SETLANG $MAKEINFO -o $PACKAGE.txt --no-split --no-headers \"$srcfile\""
echo "Generating ASCII... ($cmd)"
eval "$cmd"
ascii_size=`calcsize $PACKAGE.txt`
ascii_gz_size=`calcsize $outdir/$PACKAGE.txt.gz`
mv $PACKAGE.txt $outdir/
-cmd="${MAKEINFO} --no-split --html -o $PACKAGE.html $html \"$srcfile\""
-echo "Generating monolithic html... ($cmd)"
-rm -rf $PACKAGE.html # in case a directory is left over
-eval "$cmd"
-html_mono_size=`calcsize $PACKAGE.html`
-gzip -f -9 -c $PACKAGE.html >$outdir/$PACKAGE.html.gz
-html_mono_gz_size=`calcsize $outdir/$PACKAGE.html.gz`
-mv $PACKAGE.html $outdir/
+html_split() {
+ cmd="$SETLANG $TEXI2HTML --output $PACKAGE.html --split=$1 $html \"$srcfile\""
+ echo "Generating html by $1... ($cmd)"
+ eval "$cmd"
+ split_html_dir=$PACKAGE.html
+ (
+ cd ${split_html_dir} || exit 1
+ ln -sf ${PACKAGE}.html index.html
+ tar -czf ../$outdir/${PACKAGE}.html_$1.tar.gz -- *.html
+ )
+ eval html_$1_tgz_size=`calcsize $outdir/${PACKAGE}.html_$1.tar.gz`
+ rm -f $outdir/html_$1/*.html
+ mkdir -p $outdir/html_$1/
+ mv ${split_html_dir}/*.html $outdir/html_$1/
+ rmdir ${split_html_dir}
+}
-cmd="${MAKEINFO} --html -o $PACKAGE.html $html \"$srcfile\""
-echo "Generating html by node... ($cmd)"
-eval "$cmd"
-split_html_dir=$PACKAGE.html
-(
- cd ${split_html_dir} || exit 1
- tar -czf ../$outdir/${PACKAGE}.html_node.tar.gz -- *.html
-)
-html_node_tgz_size=`calcsize $outdir/${PACKAGE}.html_node.tar.gz`
-rm -f $outdir/html_node/*.html
-mkdir -p $outdir/html_node/
-mv ${split_html_dir}/*.html $outdir/html_node/
-rmdir ${split_html_dir}
+if test -z "$use_texi2html"; then
+ cmd="$SETLANG $MAKEINFO --no-split --html -o $PACKAGE.html $html \"$srcfile\""
+ echo "Generating monolithic html... ($cmd)"
+ rm -rf $PACKAGE.html # in case a directory is left over
+ eval "$cmd"
+ html_mono_size=`calcsize $PACKAGE.html`
+ gzip -f -9 -c $PACKAGE.html >$outdir/$PACKAGE.html.gz
+ html_mono_gz_size=`calcsize $outdir/$PACKAGE.html.gz`
+ mv $PACKAGE.html $outdir/
+
+ cmd="$SETLANG $MAKEINFO --html -o $PACKAGE.html $html \"$srcfile\""
+ echo "Generating html by node... ($cmd)"
+ eval "$cmd"
+ split_html_dir=$PACKAGE.html
+ (
+ cd ${split_html_dir} || exit 1
+ tar -czf ../$outdir/${PACKAGE}.html_node.tar.gz -- *.html
+ )
+ html_node_tgz_size=`calcsize $outdir/${PACKAGE}.html_node.tar.gz`
+ rm -f $outdir/html_node/*.html
+ mkdir -p $outdir/html_node/
+ mv ${split_html_dir}/*.html $outdir/html_node/
+ rmdir ${split_html_dir}
+else
+ cmd="$SETLANG $TEXI2HTML --output $PACKAGE.html $html \"$srcfile\""
+ echo "Generating monolithic html... ($cmd)"
+ rm -rf $PACKAGE.html # in case a directory is left over
+ eval "$cmd"
+ html_mono_size=`calcsize $PACKAGE.html`
+ gzip -f -9 -c $PACKAGE.html >$outdir/$PACKAGE.html.gz
+ html_mono_gz_size=`calcsize $outdir/$PACKAGE.html.gz`
+ mv $PACKAGE.html $outdir/
+
+ html_split node
+ html_split chapter
+ html_split section
+fi
echo Making .tar.gz for sources...
srcfiles=`ls *.texinfo *.texi *.txi *.eps 2>/dev/null`
texi_tgz_size=`calcsize $outdir/$PACKAGE.texi.tar.gz`
if test -n "$docbook"; then
- cmd="${MAKEINFO} -o - --docbook \"$srcfile\" > ${srcdir}/$PACKAGE-db.xml"
+ cmd="$SETLANG $MAKEINFO -o - --docbook \"$srcfile\" > ${srcdir}/$PACKAGE-db.xml"
echo "Generating docbook XML... $(cmd)"
eval "$cmd"
docbook_xml_size=`calcsize $PACKAGE-db.xml`
fi
echo Writing index file...
+if test -z "$use_texi2html"; then
+ CONDS="/%%IF *HTML_SECTION%%/,/%%ENDIF *HTML_SECTION%%/d;\
+ /%%IF *HTML_CHAPTER%%/,/%%ENDIF *HTML_CHAPTER%%/d"
+else
+ CONDS="/%%ENDIF.*%%/d;/%%IF *HTML_SECTION%%/d;/%%IF *HTML_CHAPTER%%/d"
+fi
curdate=`date '+%B %d, %Y'`
sed \
-e "s!%%TITLE%%!$MANUAL_TITLE!g" \
-e "s!%%HTML_MONO_SIZE%%!$html_mono_size!g" \
-e "s!%%HTML_MONO_GZ_SIZE%%!$html_mono_gz_size!g" \
-e "s!%%HTML_NODE_TGZ_SIZE%%!$html_node_tgz_size!g" \
+ -e "s!%%HTML_SECTION_TGZ_SIZE%%!$html_section_tgz_size!g" \
+ -e "s!%%HTML_CHAPTER_TGZ_SIZE%%!$html_chapter_tgz_size!g" \
-e "s!%%INFO_TGZ_SIZE%%!$info_tgz_size!g" \
-e "s!%%DVI_GZ_SIZE%%!$dvi_gz_size!g" \
-e "s!%%PDF_SIZE%%!$pdf_size!g" \
-e "s!%%DOCBOOK_XML_GZ_SIZE%%!$docbook_xml_gz_size!g" \
-e "s,%%SCRIPTURL%%,$scripturl,g" \
-e "s!%%SCRIPTNAME%%!$prog!g" \
+ -e "$CONDS" \
$GENDOCS_TEMPLATE_DIR/gendocs_template >$outdir/index.html
echo "Done! See $outdir/ subdirectory for new files."
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
projects / gnulib.git / blobdiff