% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2005-08-04.11}
+\def\texinfoversion{2007-01-02.19}
%
% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software
-% Foundation, Inc.
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
+% 2007 Free Software Foundation, Inc.
%
% This texinfo.tex file is free software; you can redistribute it and/or
% modify it under the terms of the GNU General Public License as
\everyjob{\message{[Texinfo version \texinfoversion]}%
\catcode`+=\active \catcode`\_=\active}
-\message{Basics,}
+
\chardef\other=12
% We never want plain's \outer definition of \+ in Texinfo.
\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
-% In some macros, we cannot use the `\? notation---the left quote is
-% in some cases the escape char.
-\chardef\backChar = `\\
+% Since the category of space is not known, we have to be careful.
+\chardef\spacecat = 10
+\def\spaceisspace{\catcode`\ =\spacecat}
+
+% sometimes characters are active, so we need control sequences.
\chardef\colonChar = `\:
\chardef\commaChar = `\,
+\chardef\dashChar = `\-
\chardef\dotChar = `\.
\chardef\exclamChar= `\!
-\chardef\plusChar = `\+
+\chardef\lquoteChar= `\`
\chardef\questChar = `\?
+\chardef\rquoteChar= `\'
\chardef\semiChar = `\;
\chardef\underChar = `\_
-\chardef\spaceChar = `\ %
-\chardef\spacecat = 10
-\def\spaceisspace{\catcode\spaceChar=\spacecat}
-
-{% for help with debugging.
- % example usage: \expandafter\show\activebackslash
- \catcode`\! = 0 \catcode`\\ = \active
- !global!def!activebackslash{\}
-}
-
% Ignore a token.
%
\def\gobble#1{}
% before the \shipout runs.
%
\indexdummies % don't expand commands in the output.
+ \normalturnoffactive % \ in index entries must not stay \, e.g., if
+ % the page break happens to be in the middle of an example.
+ % We don't want .vr (or whatever) entries like this:
+ % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
+ % "\acronym" won't work when it's read back in;
+ % it needs to be
+ % {\code {{\tt \backslashcurfont }acronym}
\shipout\vbox{%
% Do this early so pdf references go to the beginning of the page.
\ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
\pagebody{#1}%
\ifdim\ht\footlinebox > 0pt
% Only leave this space if the footline is nonempty.
- % (We lessened \vsize for it in \oddfootingxxx.)
+ % (We lessened \vsize for it in \oddfootingyyy.)
% The \baselineskip=24pt in plain's \makefootline has no effect.
- \vskip 2\baselineskip
+ \vskip 24pt
\unvbox\footlinebox
\fi
%
%
\def\parsearg{\parseargusing{}}
\def\parseargusing#1#2{%
- \def\next{#2}%
+ \def\argtorun{#2}%
\begingroup
\obeylines
\spaceisspace
\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
\def\temp{#3}%
\ifx\temp\empty
- % We cannot use \next here, as it holds the macro to run;
- % thus we reuse \temp.
+ % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
\let\temp\finishparsearg
\else
\let\temp\argcheckspaces
% If a _delimited_ argument is enclosed in braces, they get stripped; so
% to get _exactly_ the rest of the line, we had to prevent such situation.
% We prepended an \empty token at the very beginning and we expand it now,
-% just before passing the control to \next.
+% just before passing the control to \argtorun.
% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
% either the null string, or it ends with \^^M---thus there is no danger
% that a pair of braces would be stripped.
%
% But first, we have to remove the trailing space token.
%
-\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}}
+\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
% \parseargdef\foo{...}
% is roughly equivalent to
% _ active, and distinguish by seeing if the current family is \slfam,
% which is what @var uses.
{
- \catcode\underChar = \active
+ \catcode`\_ = \active
\gdef\mathunderscore{%
- \catcode\underChar=\active
+ \catcode`\_=\active
\def_{\ifnum\fam=\slfam \_\else\sb\fi}%
}
}
\def\minus{$-$}
% @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em. So do
+% whichever is larger.
%
\def\dots{%
\leavevmode
- \hbox to 1.5em{%
- \hskip 0pt plus 0.25fil
- .\hfil.\hfil.%
- \hskip 0pt plus 0.5fil
+ \setbox0=\hbox{...}% get width of three periods
+ \ifdim\wd0 > 1.5em
+ \dimen0 = \wd0
+ \else
+ \dimen0 = 1.5em
+ \fi
+ \hbox to \dimen0{%
+ \hskip 0pt plus.25fil
+ .\hskip 0pt plus1fil
+ .\hskip 0pt plus1fil
+ .\hskip 0pt plus.5fil
}%
}
\fi
\fi
-% PDF uses PostScript string constants for the names of xref targets, to
+% PDF uses PostScript string constants for the names of xref targets,
% for display in the outlines, and in other places. Thus, we have to
% double any backslashes. Otherwise, a name like "\node" will be
% interpreted as a newline (\n), followed by o, d, e. Not good.
% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
% (and related messages, the final outcome is that it is up to the TeX
% user to double the backslashes and otherwise make the string valid, so
-% that's we do).
+% that's what we do).
% double active backslashes.
%
{\catcode`\@=0 \catcode`\\=\active
- @gdef@activebackslash{@catcode`@\=@active @otherbackslash}
@gdef@activebackslashdouble{%
- @catcode@backChar=@active
+ @catcode`@\=@active
@let\=@doublebackslash}
}
% To handle parens, we must adopt a different approach, since parens are
% not active characters. hyperref.dtx (which has the same problem as
-% us) handles it with this amazing macro to replace tokens. I've
-% tinkered with it a little for texinfo, but it's definitely from there.
+% us) handles it with this amazing macro to replace tokens, with minor
+% changes for Texinfo. It is included here under the GPL by permission
+% from the author, Heiko Oberdiek.
%
% #1 is the tokens to replace.
% #2 is the replacement.
\def\backslashparens#1{%
\xdef#1{#1}% redefine it as its expansion; the definition is simply
% \lastnode when called from \setref -> \pdfmkdest.
- \HyPsdSubst{(}{\backslashlparen}{#1}%
- \HyPsdSubst{)}{\backslashrparen}{#1}%
+ \HyPsdSubst{(}{\realbackslash(}{#1}%
+ \HyPsdSubst{)}{\realbackslash)}{#1}%
}
-{\catcode\exclamChar = 0 \catcode\backChar = \other
- !gdef!backslashlparen{\(}%
- !gdef!backslashrparen{\)}%
-}
+\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
+with PDF output, and none of those formats could be found. (.eps cannot
+be supported due to the design of the PDF format; use regular TeX (DVI
+output) for that.)}
\ifpdf
\input pdfcolor
- \pdfcatalog{/PageMode /UseOutlines}%
+ \pdfcatalog{/PageMode /UseOutlines}
+ %
+ % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
\def\dopdfimage#1#2#3{%
- \def\imagewidth{#2}%
- \def\imageheight{#3}%
+ \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+ \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+ %
+ % pdftex (and the PDF format) support .png, .jpg, .pdf (among
+ % others). Let's try in that order.
+ \let\pdfimgext=\empty
+ \begingroup
+ \openin 1 #1.png \ifeof 1
+ \openin 1 #1.jpg \ifeof 1
+ \openin 1 #1.jpeg \ifeof 1
+ \openin 1 #1.JPG \ifeof 1
+ \openin 1 #1.pdf \ifeof 1
+ \errhelp = \nopdfimagehelp
+ \errmessage{Could not find image file #1 for pdf}%
+ \else \gdef\pdfimgext{pdf}%
+ \fi
+ \else \gdef\pdfimgext{JPG}%
+ \fi
+ \else \gdef\pdfimgext{jpeg}%
+ \fi
+ \else \gdef\pdfimgext{jpg}%
+ \fi
+ \else \gdef\pdfimgext{png}%
+ \fi
+ \closein 1
+ \endgroup
+ %
% without \immediate, pdftex seg faults when the same image is
% included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
\ifnum\pdftexversion < 14
\else
\immediate\pdfximage
\fi
- \ifx\empty\imagewidth\else width \imagewidth \fi
- \ifx\empty\imageheight\else height \imageheight \fi
+ \ifdim \wd0 >0pt width \imagewidth \fi
+ \ifdim \wd2 >0pt height \imageheight \fi
\ifnum\pdftexversion<13
- #1.pdf%
+ #1.\pdfimgext
\else
- {#1.pdf}%
+ {#1.\pdfimgext}%
\fi
\ifnum\pdftexversion < 14 \else
\pdfrefximage \pdflastximage
\fi}
+ %
\def\pdfmkdest#1{{%
% We have to set dummies so commands such as @code, and characters
% such as \, aren't expanded when present in a section title.
- \atdummies
+ \indexnofonts
+ \turnoffactive
\activebackslashdouble
\def\pdfdestname{#1}%
\backslashparens\pdfdestname
\pdfdest name{\pdfdestname} xyz%
- }}%
+ }}
%
% used to mark target names; must be expandable.
- \def\pdfmkpgn#1{#1}%
+ \def\pdfmkpgn#1{#1}
%
\let\linkcolor = \Blue % was Cyan, but that seems light?
\def\endlink{\Black\pdfendlink}
+ %
% Adding outlines to PDF; macros for calculating structure of outlines
% come from Petr Olsak
\def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
% now, I guess we'll just let the pdf reader have its way.
\indexnofonts
\setupdatafile
- \activebackslash
+ \catcode`\\=\active \otherbackslash
\input \jobname.toc
\endgroup
}
\else
\let \startlink \pdfstartlink
\fi
+ % make a live url in pdf output.
\def\pdfurl#1{%
\begingroup
- \normalturnoffactive\def\@{@}%
+ % it seems we really need yet another set of dummies; have not
+ % tried to figure out what each command should do in the context
+ % of @url. for now, just make @/ a no-op, that's the only one
+ % people have actually reported a problem with.
+ %
+ \normalturnoffactive
+ \def\@{@}%
+ \let\/=\empty
\makevalueexpandable
\leavevmode\Red
\startlink attr{/Border [0 0 0]}%
% We don't need math for this font style.
\def\ttsl{\setfontstyle{ttsl}}
+
% Default leading.
\newdimen\textleading \textleading = 13.2pt
}%
}
+
% Set the font macro #1 to the font named #2, adding on the
% specified font prefix (normally `cm').
% #3 is the font's design size, #4 is a scale factor
\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
+
% Use cm as the default font prefix.
% To specify the font prefix, you must define \fontprefix
% before you read in texinfo.tex.
\def\scshape{csc}
\def\scbshape{csc}
+% Definitions for a main text size of 11pt. This is the default in
+% Texinfo.
+%
+\def\definetextfontsizexi{
% Text fonts (11.2pt, magstep1).
\def\textnominalsize{11pt}
\edef\mainmagstep{\magstephalf}
\font\reducedi=cmmi10
\font\reducedsy=cmsy10
+% reset the current fonts
+\textfonts
+\rm
+} % end of 11pt text font size definitions
+
+
+% Definitions to make the main text be 10pt Computer Modern, with
+% section, chapter, etc., sizes following suit. This is for the GNU
+% Press printing of the Emacs 22 manual. Maybe other manuals in the
+% future. Used with @smallbook, which sets the leading to 12pt.
+%
+\def\definetextfontsizex{%
+% Text fonts (10pt).
+\def\textnominalsize{10pt}
+\edef\mainmagstep{1000}
+\setfont\textrm\rmshape{10}{\mainmagstep}
+\setfont\texttt\ttshape{10}{\mainmagstep}
+\setfont\textbf\bfshape{10}{\mainmagstep}
+\setfont\textit\itshape{10}{\mainmagstep}
+\setfont\textsl\slshape{10}{\mainmagstep}
+\setfont\textsf\sfshape{10}{\mainmagstep}
+\setfont\textsc\scshape{10}{\mainmagstep}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstephalf}
+\setfont\deftt\ttshape{10}{\magstephalf}
+\setfont\defttsl\ttslshape{10}{\magstephalf}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}
+\setfont\smalltt\ttshape{9}{1000}
+\setfont\smallbf\bfshape{10}{900}
+\setfont\smallit\itshape{9}{1000}
+\setfont\smallsl\slshape{9}{1000}
+\setfont\smallsf\sfshape{9}{1000}
+\setfont\smallsc\scshape{10}{900}
+\setfont\smallttsl\ttslshape{10}{900}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}
+\setfont\smallertt\ttshape{8}{1000}
+\setfont\smallerbf\bfshape{10}{800}
+\setfont\smallerit\itshape{8}{1000}
+\setfont\smallersl\slshape{8}{1000}
+\setfont\smallersf\sfshape{8}{1000}
+\setfont\smallersc\scshape{10}{800}
+\setfont\smallerttsl\ttslshape{10}{800}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}
+\setfont\titleit\itbshape{10}{\magstep4}
+\setfont\titlesl\slbshape{10}{\magstep4}
+\setfont\titlett\ttbshape{12}{\magstep3}
+\setfont\titlettsl\ttslshape{10}{\magstep4}
+\setfont\titlesf\sfbshape{17}{\magstep1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\authorrm{\secrm}
+\def\authortt{\sectt}
+
+% Chapter fonts (14.4pt).
+\def\chapnominalsize{14pt}
+\setfont\chaprm\rmbshape{12}{\magstep1}
+\setfont\chapit\itbshape{10}{\magstep2}
+\setfont\chapsl\slbshape{10}{\magstep2}
+\setfont\chaptt\ttbshape{12}{\magstep1}
+\setfont\chapttsl\ttslshape{10}{\magstep2}
+\setfont\chapsf\sfbshape{12}{\magstep1}
+\let\chapbf\chaprm
+\setfont\chapsc\scbshape{10}{\magstep2}
+\font\chapi=cmmi12 scaled \magstep1
+\font\chapsy=cmsy10 scaled \magstep2
+
+% Section fonts (12pt).
+\def\secnominalsize{12pt}
+\setfont\secrm\rmbshape{12}{1000}
+\setfont\secit\itbshape{10}{\magstep1}
+\setfont\secsl\slbshape{10}{\magstep1}
+\setfont\sectt\ttbshape{12}{1000}
+\setfont\secttsl\ttslshape{10}{\magstep1}
+\setfont\secsf\sfbshape{12}{1000}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep1}
+\font\seci=cmmi12
+\font\secsy=cmsy10 scaled \magstep1
+
+% Subsection fonts (10pt).
+\def\ssecnominalsize{10pt}
+\setfont\ssecrm\rmbshape{10}{1000}
+\setfont\ssecit\itbshape{10}{1000}
+\setfont\ssecsl\slbshape{10}{1000}
+\setfont\ssectt\ttbshape{10}{1000}
+\setfont\ssecttsl\ttslshape{10}{1000}
+\setfont\ssecsf\sfbshape{10}{1000}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1000}
+\font\sseci=cmmi10
+\font\ssecsy=cmsy10
+
+% Reduced fonts for @acro in text (9pt).
+\def\reducednominalsize{9pt}
+\setfont\reducedrm\rmshape{9}{1000}
+\setfont\reducedtt\ttshape{9}{1000}
+\setfont\reducedbf\bfshape{10}{900}
+\setfont\reducedit\itshape{9}{1000}
+\setfont\reducedsl\slshape{9}{1000}
+\setfont\reducedsf\sfshape{9}{1000}
+\setfont\reducedsc\scshape{10}{900}
+\setfont\reducedttsl\ttslshape{10}{900}
+\font\reducedi=cmmi9
+\font\reducedsy=cmsy9
+
+% reduce space between paragraphs
+\divide\parskip by 2
+
+% reset the current fonts
+\textfonts
+\rm
+} % end of 10pt text font size definitions
+
+
+% We provide the user-level command
+% @fonttextsize 10
+% (or 11) to redefine the text font size. pt is assumed.
+%
+\def\xword{10}
+\def\xiword{11}
+%
+\parseargdef\fonttextsize{%
+ \def\textsizearg{#1}%
+ \wlog{doing @fonttextsize \textsizearg}%
+ %
+ % Set \globaldefs so that documents can use this inside @tex, since
+ % makeinfo 4.8 does not support it, but we need it nonetheless.
+ %
+ \begingroup \globaldefs=1
+ \ifx\textsizearg\xword \definetextfontsizex
+ \else \ifx\textsizearg\xiword \definetextfontsizexi
+ \else
+ \errhelp=\EMsimple
+ \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
+ \fi\fi
+ \endgroup
+}
+
+
% In order for the font changes to affect most math symbols and letters,
% we have to define the \textfont of the standard families. Since
% texinfo doesn't allow for producing subscripts and superscripts except
% Set up the default fonts, so we can use them for creating boxes.
%
-\textfonts \rm
+\definetextfontsizexi
% Define these so they can be easily changed for other fonts.
\def\angleleft{$\langle$}
\hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
\kern-0.4pt\hrule}%
\kern-.06em\raise0.4pt\hbox{\angleright}}}}
+\def\key #1{{\nohyphenation \uppercase{#1}}\null}
% The old definition, with no lozenge:
%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
% and arrange explicitly to hyphenate at a dash.
% -- rms.
{
- \catcode`\-=\active
- \catcode`\_=\active
+ \catcode`\-=\active \catcode`\_=\active
+ \catcode`\'=\active \catcode`\`=\active
%
\global\def\code{\begingroup
- \catcode`\-=\active \catcode`\_=\active
+ \catcode\rquoteChar=\active \catcode\lquoteChar=\active
+ \let'\codequoteright \let`\codequoteleft
+ %
+ \catcode\dashChar=\active \catcode\underChar=\active
\ifallowcodebreaks
\let-\codedash
\let_\codeunder
}$%
}
+% @textdegree - the normal degrees sign.
+%
+\def\textdegree{$^\circ$}
+
% Laurent Siebenmann reports \Orb undefined with:
% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38
% so we'll define it if necessary.
%
% Leave some space for the footline. Hopefully ok to assume
% @evenfooting will not be used by itself.
- \global\advance\pageheight by -\baselineskip
- \global\advance\vsize by -\baselineskip
+ \global\advance\pageheight by -12pt
+ \global\advance\vsize by -12pt
}
\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
\def\doignore#1{\begingroup
% Scan in ``verbatim'' mode:
+ \obeylines
\catcode`\@ = \other
\catcode`\{ = \other
\catcode`\} = \other
\gdef\dodoignore#1{%
% #1 contains the command name as a string, e.g., `ifinfo'.
%
- % Define a command to find the next `@end #1', which must be on a line
- % by itself.
- \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}%
+ % Define a command to find the next `@end #1'.
+ \long\def\doignoretext##1^^M@end #1{%
+ \doignoretextyyy##1^^M@#1\_STOP_}%
+ %
% And this command to find another #1 command, at the beginning of a
% line. (Otherwise, we would consider a line `@c @ifset', for
% example, to count as an @ifset for nesting.)
\long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
%
% And now expand that command.
- \obeylines %
\doignoretext ^^M%
}%
}
}
% Finish off ignored text.
-\def\enddoignore{\endgroup\ignorespaces}
+{ \obeylines%
+ % Ignore anything after the last `@end #1'; this matters in verbatim
+ % environments, where otherwise the newline after an ignored conditional
+ % would result in a blank line in the output.
+ \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
+}
% @set VAR sets the variable VAR to an empty value.
\escapechar = `\\ % use backslash in output files.
\def\@{@}% change to @@ when we switch to @ as escape char in index files.
\def\ {\realbackslash\space }%
+ %
% Need these in case \tex is in effect and \{ is a \delimiter again.
% But can't use \lbracecmd and \rbracecmd because texindex assumes
% braces and backslashes are used only as delimiters.
\let\{ = \mylbrace
\let\} = \myrbrace
%
+ % I don't entirely understand this, but when an index entry is
+ % generated from a macro call, the \endinput which \scanmacro inserts
+ % causes processing to be prematurely terminated. This is,
+ % apparently, because \indexsorttmp is fully expanded, and \endinput
+ % is an expandable command. The redefinition below makes \endinput
+ % disappear altogether for that purpose -- although logging shows that
+ % processing continues to some further point. On the other hand, it
+ % seems \endinput does not hurt in the printed index arg, since that
+ % is still getting written without apparent harm.
+ %
+ % Sample source (mac-idx3.tex, reported by Graham Percival to
+ % help-texinfo, 22may06):
+ % @macro funindex {WORD}
+ % @findex xyz
+ % @end macro
+ % ...
+ % @funindex commtest
+ %
+ % The above is not enough to reproduce the bug, but it gives the flavor.
+ %
+ % Sample whatsit resulting:
+ % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
+ %
+ % So:
+ \let\endinput = \empty
+ %
% Do the redefinitions.
\commondummies
}
%
% Do the redefinitions.
\commondummies
+ \otherbackslash
}
% Called from \indexdummies and \atdummies.
\definedummyword\point
\definedummyword\print
\definedummyword\result
+ \definedummyword\textdegree
%
% We want to disable all macros so that they are not expanded by \write.
\macrolist
% \commondummiesnofonts: common to \commondummies and \indexnofonts.
%
-% Better have this without active chars.
-{
- \catcode`\~=\other
- \gdef\commondummiesnofonts{%
- % Control letters and accents.
- \definedummyletter\!%
- \definedummyaccent\"%
- \definedummyaccent\'%
- \definedummyletter\*%
- \definedummyaccent\,%
- \definedummyletter\.%
- \definedummyletter\/%
- \definedummyletter\:%
- \definedummyaccent\=%
- \definedummyletter\?%
- \definedummyaccent\^%
- \definedummyaccent\`%
- \definedummyaccent\~%
- \definedummyword\u
- \definedummyword\v
- \definedummyword\H
- \definedummyword\dotaccent
- \definedummyword\ringaccent
- \definedummyword\tieaccent
- \definedummyword\ubaraccent
- \definedummyword\udotaccent
- \definedummyword\dotless
- %
- % Texinfo font commands.
- \definedummyword\b
- \definedummyword\i
- \definedummyword\r
- \definedummyword\sc
- \definedummyword\t
- %
- % Commands that take arguments.
- \definedummyword\acronym
- \definedummyword\cite
- \definedummyword\code
- \definedummyword\command
- \definedummyword\dfn
- \definedummyword\emph
- \definedummyword\env
- \definedummyword\file
- \definedummyword\kbd
- \definedummyword\key
- \definedummyword\math
- \definedummyword\option
- \definedummyword\samp
- \definedummyword\strong
- \definedummyword\tie
- \definedummyword\uref
- \definedummyword\url
- \definedummyword\var
- \definedummyword\verb
- \definedummyword\w
- }
+\def\commondummiesnofonts{%
+ % Control letters and accents.
+ \definedummyletter\!%
+ \definedummyaccent\"%
+ \definedummyaccent\'%
+ \definedummyletter\*%
+ \definedummyaccent\,%
+ \definedummyletter\.%
+ \definedummyletter\/%
+ \definedummyletter\:%
+ \definedummyaccent\=%
+ \definedummyletter\?%
+ \definedummyaccent\^%
+ \definedummyaccent\`%
+ \definedummyaccent\~%
+ \definedummyword\u
+ \definedummyword\v
+ \definedummyword\H
+ \definedummyword\dotaccent
+ \definedummyword\ringaccent
+ \definedummyword\tieaccent
+ \definedummyword\ubaraccent
+ \definedummyword\udotaccent
+ \definedummyword\dotless
+ %
+ % Texinfo font commands.
+ \definedummyword\b
+ \definedummyword\i
+ \definedummyword\r
+ \definedummyword\sc
+ \definedummyword\t
+ %
+ % Commands that take arguments.
+ \definedummyword\acronym
+ \definedummyword\cite
+ \definedummyword\code
+ \definedummyword\command
+ \definedummyword\dfn
+ \definedummyword\emph
+ \definedummyword\env
+ \definedummyword\file
+ \definedummyword\kbd
+ \definedummyword\key
+ \definedummyword\math
+ \definedummyword\option
+ \definedummyword\pxref
+ \definedummyword\ref
+ \definedummyword\samp
+ \definedummyword\strong
+ \definedummyword\tie
+ \definedummyword\uref
+ \definedummyword\url
+ \definedummyword\var
+ \definedummyword\verb
+ \definedummyword\w
+ \definedummyword\xref
}
% \indexnofonts is used when outputting the strings to sort the index
\def\point{.}%
\def\print{-|}%
\def\result{=>}%
+ \def\textdegree{degrees}%
%
% We need to get rid of all macros, leaving only the arguments (if present).
% Of course this is not nearly correct, but it is the best we can do for now.
\endgroup
}
-% Like \dotfill except takes at least 1 em.
+% Like plain.tex's \dotfill, except uses up at least 1 em.
\def\indexdotfill{\cleaders
- \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
+ \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill}
\def\primary #1{\line{#1\hfil}}
\ifx\temptype\Ynothingkeyword
\setbox0 = \hbox{}%
\def\toctype{unnchap}%
+ \gdef\thischapternum{}%
\gdef\thischapter{#1}%
\else\ifx\temptype\Yomitfromtockeyword
\setbox0 = \hbox{}% contents like unnumbered, but no toc entry
\def\toctype{omit}%
+ \gdef\thischapternum{}%
\gdef\thischapter{}%
\else\ifx\temptype\Yappendixkeyword
\setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
\def\toctype{app}%
+ \xdef\thischapternum{\appendixletter}%
% We don't substitute the actual chapter name into \thischapter
% because we don't want its macros evaluated now. And we don't
% use \thissection because that changes with each section.
\else
\setbox0 = \hbox{#3\enspace}%
\def\toctype{numchap}%
+ \xdef\thischapternum{\the\chapno}%
\xdef\thischapter{\putwordChapter{} \the\chapno:
\noexpand\thischaptername}%
\fi\fi\fi
\gdef\thissection{#1}%
\fi\fi\fi
%
- % Write the toc entry (before \donoderef). See comments in \chfplain.
+ % Write the toc entry (before \donoderef). See comments in \chapmacro.
\writetocentry{\toctype\sectionlevel}{#1}{#4}%
%
% Write the node reference (= pdf destination for pdftex).
- % Again, see comments in \chfplain.
+ % Again, see comments in \chapmacro.
\donoderef{#3}%
%
+ % Interline glue will be inserted when the vbox is completed.
+ % That glue will be a valid breakpoint for the page, since it'll be
+ % preceded by a whatsit (usually from the \donoderef, or from the
+ % \writetocentry if there was no node). We don't want to allow that
+ % break, since then the whatsits could end up on page n while the
+ % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000.
+ \nobreak
+ %
% Output the actual section heading.
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
\hangindent=\wd0 % zero if no section number
\edef\temp{%
\write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
\temp
- }
+ }%
\fi
\fi
%
{\tentt \global\dimen0 = 3em}% Width of the box.
\dimen2 = .55pt % Thickness of rules
% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
+\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt}
%
\setbox\errorbox=\hbox to \dimen0{\hfil
\hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
\let\SETdispenvsize\relax
\def\setnormaldispenv{%
\ifx\SETdispenvsize\smallword
+ % end paragraph for sake of leading, in case document has no blank
+ % line. This is redundant with what happens in \aboveenvbreak, but
+ % we need to do it before changing the fonts, and it's inconvenient
+ % to change the fonts afterward.
+ \ifnum \lastpenalty=10000 \else \endgraf \fi
\smallexamplefonts \rm
\fi
}
\def\setsmalldispenv{%
\ifx\SETdispenvsize\nosmallword
\else
+ \ifnum \lastpenalty=10000 \else \endgraf \fi
\smallexamplefonts \rm
\fi
}
%
\maketwodispenvs {lisp}{example}{%
\nonfillstart
- \tt
+ \tt\quoteexpand
\let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
\gobble % eat return
}
-
% @display/@smalldisplay: same as @lisp except keep current font.
%
\makedispenv {display}{%
\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
%
\def\starttabbox{\setbox0=\hbox\bgroup}
+
+% Allow an option to not replace quotes with a regular directed right
+% quote/apostrophe (char 0x27), but instead use the undirected quote
+% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it
+% the default, but it works for pasting with more pdf viewers (at least
+% evince), the lilypond developers report. xpdf does work with the
+% regular 0x27.
+%
+\def\codequoteright{%
+ \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
+ '%
+ \else
+ \char'15
+ \fi
+}
+%
+% and a similar option for the left quote char vs. a grave accent.
+% Modern fonts display ASCII 0x60 as a grave accent, so some people like
+% the code environments to do likewise.
+%
+\def\codequoteleft{%
+ \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
+ `%
+ \else
+ \char'22
+ \fi
+}
+%
\begingroup
\catcode`\^^I=\active
\gdef\tabexpand{%
\wd0=\dimen0 \box0 \starttabbox
}%
}
+ \catcode`\'=\active
+ \gdef\rquoteexpand{\catcode\rquoteChar=\active \def'{\codequoteright}}%
+ %
+ \catcode`\`=\active
+ \gdef\lquoteexpand{\catcode\lquoteChar=\active \def`{\codequoteleft}}%
+ %
+ \gdef\quoteexpand{\rquoteexpand \lquoteexpand}%
\endgroup
+
+% start the verbatim environment.
\def\setupverbatim{%
\let\nonarrowing = t%
\nonfillstart
\def\par{\leavevmode\egroup\box0\endgraf}%
\catcode`\`=\active
\tabexpand
+ \quoteexpand
% Respect line breaks,
% print special symbols as themselves, and
% make each space count
\endgroup
}
+
\message{defuns,}
% @defun etc.
\spaceisspace
%
% Append \endinput to make sure that TeX does not see the ending newline.
- %
% I've verified that it is necessary both for e-TeX and for ordinary TeX
% --kasal, 29nov03
\scantokens{#1\endinput}%
% {. If so it reads up to the closing }, if not, it reads the whole
% line. Whatever was read is then fed to the next control sequence
% as an argument (by \parsebrace or \parsearg)
-\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
\def\braceorlinexxx{%
\ifx\nchar\bgroup\else
\expandafter\parsearg
- \fi \next}
+ \fi \macnamexxx}
% @alias.
\message{cross references,}
\newwrite\auxfile
-
\newif\ifhavexrefs % True if xref values are known.
\newif\ifwarnedxrefs % True if we warned once that they aren't known.
\ifpdf
\leavevmode
\getfilename{#4}%
- {\turnoffactive
+ {\indexnofonts
+ \turnoffactive
% See comments at \activebackslashdouble.
{\activebackslashdouble \xdef\pdfxrefdest{#1}%
\backslashparens\pdfxrefdest}%
% If the user specified the print name (third arg) to the ref,
% print it instead of our usual "Figure 1.2".
\ifdim\wd0 = 0pt
- \refx{#1-snt}%
+ \refx{#1-snt}{}%
\else
\printedrefname
\fi
% collisions). But if this is a float type, we have more work to do.
%
\def\xrdef#1#2{%
- \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value.
+ {% The node name might contain 8-bit characters, which in our current
+ % implementation are changed to commands like @'e. Don't let these
+ % mess up the control sequence name.
+ \indexnofonts
+ \turnoffactive
+ \xdef\safexrefname{#1}%
+ }%
+ %
+ \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
%
% Was that xref control sequence that we just defined for a float?
- \expandafter\iffloat\csname XR#1\endcsname
+ \expandafter\iffloat\csname XR\safexrefname\endcsname
% it was a float, and we have the (safe) float type in \iffloattype.
\expandafter\let\expandafter\floatlist
\csname floatlist\iffloattype\endcsname
%
% Remember this xref in the control sequence \floatlistFLOATTYPE,
% for later use in \listoffloats.
- \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}%
+ \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0
+ {\safexrefname}}%
\fi
}
\input\jobname.#1
\endgroup}
+
\message{insertions,}
% including footnotes.
% above and below.
\nobreak\vskip\parskip
\nobreak
- \line\bgroup\hss
+ \line\bgroup
\fi
%
% Output the image.
\epsfbox{#1.eps}%
\fi
%
- \ifimagevmode \hss \egroup \bigbreak \fi % space after the image
+ \ifimagevmode \egroup \bigbreak \fi % space after the image
\endgroup}
{%
\atdummies
%
- % seems like we need to list every single command, as a long
- % caption might well contain environments, etc.? Or maybe this
- % should be done in \commondummies?
- \let\xref=\relax
- \let\pxref=\relax
- \let\ref=\relax
- %
% since we read the caption text in the macro world, where ^^M
% is turned into a normal character, we have to scan it back, so
% we don't write the literal three characters "^^M" into the aux file.
\writeentry
}}
+
\message{localization,}
-% and i18n.
% @documentlanguage is usually given very early, just after
% @setfilename. If done too late, it may not override everything
is empty. Maybe you need to install it? In the current directory
should work if nowhere else does.}
+% Set the catcode of characters 128 through 255 to the specified number.
+%
+\def\setnonasciicharscatcode#1{%
+ \count255=128
+ \loop\ifnum\count255<256
+ \global\catcode\count255=#1
+ \advance\count255 by 1
+ \repeat
+}
-% @documentencoding should change something in TeX eventually, most
-% likely, but for now just recognize it.
-\let\documentencoding = \comment
+% @documentencoding sets the definition of non-ASCII characters
+% according to the specified encoding.
+%
+\parseargdef\documentencoding{%
+ % Encoding being declared for the document.
+ \def\declaredencoding{\csname #1.enc\endcsname}%
+ %
+ % Supported encodings: names converted to tokens in order to be able
+ % to compare them with \ifx.
+ \def\ascii{\csname US-ASCII.enc\endcsname}%
+ \def\latnine{\csname ISO-8859-15.enc\endcsname}%
+ \def\latone{\csname ISO-8859-1.enc\endcsname}%
+ \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
+ \def\utfeight{\csname UTF-8.enc\endcsname}%
+ %
+ \ifx \declaredencoding \ascii
+ \asciichardefs
+ %
+ \else \ifx \declaredencoding \lattwo
+ \setnonasciicharscatcode\active
+ \lattwochardefs
+ %
+ \else \ifx \declaredencoding \latone
+ \setnonasciicharscatcode\active
+ \latonechardefs
+ %
+ \else \ifx \declaredencoding \latnine
+ \setnonasciicharscatcode\active
+ \latninechardefs
+ %
+ \else \ifx \declaredencoding \utfeight
+ \setnonasciicharscatcode\active
+ \utfeightchardefs
+ %
+ \else
+ \message{Unknown document encoding #1, ignoring.}%
+ %
+ \fi % utfeight
+ \fi % latnine
+ \fi % latone
+ \fi % lattwo
+ \fi % ascii
+}
+% A message to be logged when using a character that isn't available
+% the default font encoding (OT1).
+%
+\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}}
+
+% Take account of \c (plain) vs. \, (Texinfo) difference.
+\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
+
+% First, make active non-ASCII characters in order for them to be
+% correctly categorized when TeX reads the replacement text of
+% macros containing the character definitions.
+\setnonasciicharscatcode\active
+%
+% Latin1 (ISO-8859-1) character definitions.
+\def\latonechardefs{%
+ \gdef^^a0{~}
+ \gdef^^a1{\exclamdown}
+ \gdef^^a2{\missingcharmsg{CENT SIGN}}
+ \gdef^^a3{{\pounds}}
+ \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+ \gdef^^a5{\missingcharmsg{YEN SIGN}}
+ \gdef^^a6{\missingcharmsg{BROKEN BAR}}
+ \gdef^^a7{\S}
+ \gdef^^a8{\"{}}
+ \gdef^^a9{\copyright}
+ \gdef^^aa{\ordf}
+ \gdef^^ab{\missingcharmsg{LEFT-POINTING DOUBLE ANGLE QUOTATION MARK}}
+ \gdef^^ac{$\lnot$}
+ \gdef^^ad{\-}
+ \gdef^^ae{\registeredsymbol}
+ \gdef^^af{\={}}
+ %
+ \gdef^^b0{\textdegree}
+ \gdef^^b1{$\pm$}
+ \gdef^^b2{$^2$}
+ \gdef^^b3{$^3$}
+ \gdef^^b4{\'{}}
+ \gdef^^b5{$\mu$}
+ \gdef^^b6{\P}
+ %
+ \gdef^^b7{$^.$}
+ \gdef^^b8{\cedilla\ }
+ \gdef^^b9{$^1$}
+ \gdef^^ba{\ordm}
+ %
+ \gdef^^bb{\missingcharmsg{RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK}}
+ \gdef^^bc{$1\over4$}
+ \gdef^^bd{$1\over2$}
+ \gdef^^be{$3\over4$}
+ \gdef^^bf{\questiondown}
+ %
+ \gdef^^c0{\`A}
+ \gdef^^c1{\'A}
+ \gdef^^c2{\^A}
+ \gdef^^c3{\~A}
+ \gdef^^c4{\"A}
+ \gdef^^c5{\ringaccent A}
+ \gdef^^c6{\AE}
+ \gdef^^c7{\cedilla C}
+ \gdef^^c8{\`E}
+ \gdef^^c9{\'E}
+ \gdef^^ca{\^E}
+ \gdef^^cb{\"E}
+ \gdef^^cc{\`I}
+ \gdef^^cd{\'I}
+ \gdef^^ce{\^I}
+ \gdef^^cf{\"I}
+ %
+ \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER ETH}}
+ \gdef^^d1{\~N}
+ \gdef^^d2{\`O}
+ \gdef^^d3{\'O}
+ \gdef^^d4{\^O}
+ \gdef^^d5{\~O}
+ \gdef^^d6{\"O}
+ \gdef^^d7{$\times$}
+ \gdef^^d8{\O}
+ \gdef^^d9{\`U}
+ \gdef^^da{\'U}
+ \gdef^^db{\^U}
+ \gdef^^dc{\"U}
+ \gdef^^dd{\'Y}
+ \gdef^^de{\missingcharmsg{LATIN CAPITAL LETTER THORN}}
+ \gdef^^df{\ss}
+ %
+ \gdef^^e0{\`a}
+ \gdef^^e1{\'a}
+ \gdef^^e2{\^a}
+ \gdef^^e3{\~a}
+ \gdef^^e4{\"a}
+ \gdef^^e5{\ringaccent a}
+ \gdef^^e6{\ae}
+ \gdef^^e7{\cedilla c}
+ \gdef^^e8{\`e}
+ \gdef^^e9{\'e}
+ \gdef^^ea{\^e}
+ \gdef^^eb{\"e}
+ \gdef^^ec{\`{\dotless i}}
+ \gdef^^ed{\'{\dotless i}}
+ \gdef^^ee{\^{\dotless i}}
+ \gdef^^ef{\"{\dotless i}}
+ %
+ \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER ETH}}
+ \gdef^^f1{\~n}
+ \gdef^^f2{\`o}
+ \gdef^^f3{\'o}
+ \gdef^^f4{\^o}
+ \gdef^^f5{\~o}
+ \gdef^^f6{\"o}
+ \gdef^^f7{$\div$}
+ \gdef^^f8{\o}
+ \gdef^^f9{\`u}
+ \gdef^^fa{\'u}
+ \gdef^^fb{\^u}
+ \gdef^^fc{\"u}
+ \gdef^^fd{\'y}
+ \gdef^^fe{\missingcharmsg{LATIN SMALL LETTER THORN}}
+ \gdef^^ff{\"y}
+}
+
+% Latin9 (ISO-8859-15) encoding character definitions.
+\def\latninechardefs{%
+ % Encoding is almost identical to Latin1.
+ \latonechardefs
+ %
+ \gdef^^a4{\euro}
+ \gdef^^a6{\v S}
+ \gdef^^a8{\v s}
+ \gdef^^b4{\v Z}
+ \gdef^^b8{\v z}
+ \gdef^^bc{\OE}
+ \gdef^^bd{\oe}
+ \gdef^^be{\"Y}
+}
+
+% Latin2 (ISO-8859-2) character definitions.
+\def\lattwochardefs{%
+ \gdef^^a0{~}
+ \gdef^^a1{\missingcharmsg{LATIN CAPITAL LETTER A WITH OGONEK}}
+ \gdef^^a2{\u{}}
+ \gdef^^a3{\L}
+ \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+ \gdef^^a5{\v L}
+ \gdef^^a6{\'S}
+ \gdef^^a7{\S}
+ \gdef^^a8{\"{}}
+ \gdef^^a9{\v S}
+ \gdef^^aa{\cedilla S}
+ \gdef^^ab{\v T}
+ \gdef^^ac{\'Z}
+ \gdef^^ad{\-}
+ \gdef^^ae{\v Z}
+ \gdef^^af{\dotaccent Z}
+ %
+ \gdef^^b0{\textdegree}
+ \gdef^^b1{\missingcharmsg{LATIN SMALL LETTER A WITH OGONEK}}
+ \gdef^^b2{\missingcharmsg{OGONEK}}
+ \gdef^^b3{\l}
+ \gdef^^b4{\'{}}
+ \gdef^^b5{\v l}
+ \gdef^^b6{\'s}
+ \gdef^^b7{\v{}}
+ \gdef^^b8{\cedilla\ }
+ \gdef^^b9{\v s}
+ \gdef^^ba{\cedilla s}
+ \gdef^^bb{\v t}
+ \gdef^^bc{\'z}
+ \gdef^^bd{\H{}}
+ \gdef^^be{\v z}
+ \gdef^^bf{\dotaccent z}
+ %
+ \gdef^^c0{\'R}
+ \gdef^^c1{\'A}
+ \gdef^^c2{\^A}
+ \gdef^^c3{\u A}
+ \gdef^^c4{\"A}
+ \gdef^^c5{\'L}
+ \gdef^^c6{\'C}
+ \gdef^^c7{\cedilla C}
+ \gdef^^c8{\v C}
+ \gdef^^c9{\'E}
+ \gdef^^ca{\missingcharmsg{LATIN CAPITAL LETTER E WITH OGONEK}}
+ \gdef^^cb{\"E}
+ \gdef^^cc{\v E}
+ \gdef^^cd{\'I}
+ \gdef^^ce{\^I}
+ \gdef^^cf{\v D}
+ %
+ \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER D WITH STROKE}}
+ \gdef^^d1{\'N}
+ \gdef^^d2{\v N}
+ \gdef^^d3{\'O}
+ \gdef^^d4{\^O}
+ \gdef^^d5{\H O}
+ \gdef^^d6{\"O}
+ \gdef^^d7{$\times$}
+ \gdef^^d8{\v R}
+ \gdef^^d9{\ringaccent U}
+ \gdef^^da{\'U}
+ \gdef^^db{\H U}
+ \gdef^^dc{\"U}
+ \gdef^^dd{\'Y}
+ \gdef^^de{\cedilla T}
+ \gdef^^df{\ss}
+ %
+ \gdef^^e0{\'r}
+ \gdef^^e1{\'a}
+ \gdef^^e2{\^a}
+ \gdef^^e3{\u a}
+ \gdef^^e4{\"a}
+ \gdef^^e5{\'l}
+ \gdef^^e6{\'c}
+ \gdef^^e7{\cedilla c}
+ \gdef^^e8{\v c}
+ \gdef^^e9{\'e}
+ \gdef^^ea{\missingcharmsg{LATIN SMALL LETTER E WITH OGONEK}}
+ \gdef^^eb{\"e}
+ \gdef^^ec{\v e}
+ \gdef^^ed{\'\i}
+ \gdef^^ee{\^\i}
+ \gdef^^ef{\v d}
+ %
+ \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER D WITH STROKE}}
+ \gdef^^f1{\'n}
+ \gdef^^f2{\v n}
+ \gdef^^f3{\'o}
+ \gdef^^f4{\^o}
+ \gdef^^f5{\H o}
+ \gdef^^f6{\"o}
+ \gdef^^f7{$\div$}
+ \gdef^^f8{\v r}
+ \gdef^^f9{\ringaccent u}
+ \gdef^^fa{\'u}
+ \gdef^^fb{\H u}
+ \gdef^^fc{\"u}
+ \gdef^^fd{\'y}
+ \gdef^^fe{\cedilla t}
+ \gdef^^ff{\dotaccent{}}
+}
+
+% UTF-8 character definitions.
+%
+% This code to support UTF-8 is based on LaTeX's utf8.def, with some
+% changes for Texinfo conventions. It is included here under the GPL by
+% permission from Frank Mittelbach and the LaTeX team.
+%
+\newcount\countUTFx
+\newcount\countUTFy
+\newcount\countUTFz
-% Page size parameters.
+\gdef\UTFviiiTwoOctets#1#2{\expandafter
+ \UTFviiiDefined\csname u8:#1\string #2\endcsname}
+%
+\gdef\UTFviiiThreeOctets#1#2#3{\expandafter
+ \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname}
%
+\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter
+ \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname}
+
+\gdef\UTFviiiDefined#1{%
+ \ifx #1\relax
+ \message{\linenumber Unicode char \string #1 not defined for Texinfo}%
+ \else
+ \expandafter #1%
+ \fi
+}
+
+\begingroup
+ \catcode`\~13
+ \catcode`\"12
+
+ \def\UTFviiiLoop{%
+ \global\catcode\countUTFx\active
+ \uccode`\~\countUTFx
+ \uppercase\expandafter{\UTFviiiTmp}%
+ \advance\countUTFx by 1
+ \ifnum\countUTFx < \countUTFy
+ \expandafter\UTFviiiLoop
+ \fi}
+
+ \countUTFx = "C2
+ \countUTFy = "E0
+ \def\UTFviiiTmp{%
+ \xdef~{\noexpand\UTFviiiTwoOctets\string~}}
+ \UTFviiiLoop
+
+ \countUTFx = "E0
+ \countUTFy = "F0
+ \def\UTFviiiTmp{%
+ \xdef~{\noexpand\UTFviiiThreeOctets\string~}}
+ \UTFviiiLoop
+
+ \countUTFx = "F0
+ \countUTFy = "F4
+ \def\UTFviiiTmp{%
+ \xdef~{\noexpand\UTFviiiFourOctets\string~}}
+ \UTFviiiLoop
+\endgroup
+
+\begingroup
+ \catcode`\"=12
+ \catcode`\<=12
+ \catcode`\.=12
+ \catcode`\,=12
+ \catcode`\;=12
+ \catcode`\!=12
+ \catcode`\~=13
+
+ \gdef\DeclareUnicodeCharacter#1#2{%
+ \countUTFz = "#1\relax
+ \wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}%
+ \begingroup
+ \parseXMLCharref
+ \def\UTFviiiTwoOctets##1##2{%
+ \csname u8:##1\string ##2\endcsname}%
+ \def\UTFviiiThreeOctets##1##2##3{%
+ \csname u8:##1\string ##2\string ##3\endcsname}%
+ \def\UTFviiiFourOctets##1##2##3##4{%
+ \csname u8:##1\string ##2\string ##3\string ##4\endcsname}%
+ \expandafter\expandafter\expandafter\expandafter
+ \expandafter\expandafter\expandafter
+ \gdef\UTFviiiTmp{#2}%
+ \endgroup}
+
+ \gdef\parseXMLCharref{%
+ \ifnum\countUTFz < "A0\relax
+ \errhelp = \EMsimple
+ \errmessage{Cannot define Unicode char value < 00A0}%
+ \else\ifnum\countUTFz < "800\relax
+ \parseUTFviiiA,%
+ \parseUTFviiiB C\UTFviiiTwoOctets.,%
+ \else\ifnum\countUTFz < "10000\relax
+ \parseUTFviiiA;%
+ \parseUTFviiiA,%
+ \parseUTFviiiB E\UTFviiiThreeOctets.{,;}%
+ \else
+ \parseUTFviiiA;%
+ \parseUTFviiiA,%
+ \parseUTFviiiA!%
+ \parseUTFviiiB F\UTFviiiFourOctets.{!,;}%
+ \fi\fi\fi
+ }
+
+ \gdef\parseUTFviiiA#1{%
+ \countUTFx = \countUTFz
+ \divide\countUTFz by 64
+ \countUTFy = \countUTFz
+ \multiply\countUTFz by 64
+ \advance\countUTFx by -\countUTFz
+ \advance\countUTFx by 128
+ \uccode `#1\countUTFx
+ \countUTFz = \countUTFy}
+
+ \gdef\parseUTFviiiB#1#2#3#4{%
+ \advance\countUTFz by "#10\relax
+ \uccode `#3\countUTFz
+ \uppercase{\gdef\UTFviiiTmp{#2#3#4}}}
+\endgroup
+
+\def\utfeightchardefs{%
+ \DeclareUnicodeCharacter{00A0}{\tie}
+ \DeclareUnicodeCharacter{00A1}{\exclamdown}
+ \DeclareUnicodeCharacter{00A3}{\pounds}
+ \DeclareUnicodeCharacter{00A8}{\"{ }}
+ \DeclareUnicodeCharacter{00A9}{\copyright}
+ \DeclareUnicodeCharacter{00AA}{\ordf}
+ \DeclareUnicodeCharacter{00AD}{\-}
+ \DeclareUnicodeCharacter{00AE}{\registeredsymbol}
+ \DeclareUnicodeCharacter{00AF}{\={ }}
+
+ \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}
+ \DeclareUnicodeCharacter{00B4}{\'{ }}
+ \DeclareUnicodeCharacter{00B8}{\cedilla{ }}
+ \DeclareUnicodeCharacter{00BA}{\ordm}
+ \DeclareUnicodeCharacter{00BF}{\questiondown}
+
+ \DeclareUnicodeCharacter{00C0}{\`A}
+ \DeclareUnicodeCharacter{00C1}{\'A}
+ \DeclareUnicodeCharacter{00C2}{\^A}
+ \DeclareUnicodeCharacter{00C3}{\~A}
+ \DeclareUnicodeCharacter{00C4}{\"A}
+ \DeclareUnicodeCharacter{00C5}{\AA}
+ \DeclareUnicodeCharacter{00C6}{\AE}
+ \DeclareUnicodeCharacter{00C7}{\cedilla{C}}
+ \DeclareUnicodeCharacter{00C8}{\`E}
+ \DeclareUnicodeCharacter{00C9}{\'E}
+ \DeclareUnicodeCharacter{00CA}{\^E}
+ \DeclareUnicodeCharacter{00CB}{\"E}
+ \DeclareUnicodeCharacter{00CC}{\`I}
+ \DeclareUnicodeCharacter{00CD}{\'I}
+ \DeclareUnicodeCharacter{00CE}{\^I}
+ \DeclareUnicodeCharacter{00CF}{\"I}
+
+ \DeclareUnicodeCharacter{00D1}{\~N}
+ \DeclareUnicodeCharacter{00D2}{\`O}
+ \DeclareUnicodeCharacter{00D3}{\'O}
+ \DeclareUnicodeCharacter{00D4}{\^O}
+ \DeclareUnicodeCharacter{00D5}{\~O}
+ \DeclareUnicodeCharacter{00D6}{\"O}
+ \DeclareUnicodeCharacter{00D8}{\O}
+ \DeclareUnicodeCharacter{00D9}{\`U}
+ \DeclareUnicodeCharacter{00DA}{\'U}
+ \DeclareUnicodeCharacter{00DB}{\^U}
+ \DeclareUnicodeCharacter{00DC}{\"U}
+ \DeclareUnicodeCharacter{00DD}{\'Y}
+ \DeclareUnicodeCharacter{00DF}{\ss}
+
+ \DeclareUnicodeCharacter{00E0}{\`a}
+ \DeclareUnicodeCharacter{00E1}{\'a}
+ \DeclareUnicodeCharacter{00E2}{\^a}
+ \DeclareUnicodeCharacter{00E3}{\~a}
+ \DeclareUnicodeCharacter{00E4}{\"a}
+ \DeclareUnicodeCharacter{00E5}{\aa}
+ \DeclareUnicodeCharacter{00E6}{\ae}
+ \DeclareUnicodeCharacter{00E7}{\cedilla{c}}
+ \DeclareUnicodeCharacter{00E8}{\`e}
+ \DeclareUnicodeCharacter{00E9}{\'e}
+ \DeclareUnicodeCharacter{00EA}{\^e}
+ \DeclareUnicodeCharacter{00EB}{\"e}
+ \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}}
+ \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}}
+ \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}
+ \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}
+
+ \DeclareUnicodeCharacter{00F1}{\~n}
+ \DeclareUnicodeCharacter{00F2}{\`o}
+ \DeclareUnicodeCharacter{00F3}{\'o}
+ \DeclareUnicodeCharacter{00F4}{\^o}
+ \DeclareUnicodeCharacter{00F5}{\~o}
+ \DeclareUnicodeCharacter{00F6}{\"o}
+ \DeclareUnicodeCharacter{00F8}{\o}
+ \DeclareUnicodeCharacter{00F9}{\`u}
+ \DeclareUnicodeCharacter{00FA}{\'u}
+ \DeclareUnicodeCharacter{00FB}{\^u}
+ \DeclareUnicodeCharacter{00FC}{\"u}
+ \DeclareUnicodeCharacter{00FD}{\'y}
+ \DeclareUnicodeCharacter{00FF}{\"y}
+
+ \DeclareUnicodeCharacter{0100}{\=A}
+ \DeclareUnicodeCharacter{0101}{\=a}
+ \DeclareUnicodeCharacter{0102}{\u{A}}
+ \DeclareUnicodeCharacter{0103}{\u{a}}
+ \DeclareUnicodeCharacter{0106}{\'C}
+ \DeclareUnicodeCharacter{0107}{\'c}
+ \DeclareUnicodeCharacter{0108}{\^C}
+ \DeclareUnicodeCharacter{0109}{\^c}
+ \DeclareUnicodeCharacter{010A}{\dotaccent{C}}
+ \DeclareUnicodeCharacter{010B}{\dotaccent{c}}
+ \DeclareUnicodeCharacter{010C}{\v{C}}
+ \DeclareUnicodeCharacter{010D}{\v{c}}
+ \DeclareUnicodeCharacter{010E}{\v{D}}
+
+ \DeclareUnicodeCharacter{0112}{\=E}
+ \DeclareUnicodeCharacter{0113}{\=e}
+ \DeclareUnicodeCharacter{0114}{\u{E}}
+ \DeclareUnicodeCharacter{0115}{\u{e}}
+ \DeclareUnicodeCharacter{0116}{\dotaccent{E}}
+ \DeclareUnicodeCharacter{0117}{\dotaccent{e}}
+ \DeclareUnicodeCharacter{011A}{\v{E}}
+ \DeclareUnicodeCharacter{011B}{\v{e}}
+ \DeclareUnicodeCharacter{011C}{\^G}
+ \DeclareUnicodeCharacter{011D}{\^g}
+ \DeclareUnicodeCharacter{011E}{\u{G}}
+ \DeclareUnicodeCharacter{011F}{\u{g}}
+
+ \DeclareUnicodeCharacter{0120}{\dotaccent{G}}
+ \DeclareUnicodeCharacter{0121}{\dotaccent{g}}
+ \DeclareUnicodeCharacter{0124}{\^H}
+ \DeclareUnicodeCharacter{0125}{\^h}
+ \DeclareUnicodeCharacter{0128}{\~I}
+ \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}}
+ \DeclareUnicodeCharacter{012A}{\=I}
+ \DeclareUnicodeCharacter{012B}{\={\dotless{i}}}
+ \DeclareUnicodeCharacter{012C}{\u{I}}
+ \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}}
+
+ \DeclareUnicodeCharacter{0130}{\dotaccent{I}}
+ \DeclareUnicodeCharacter{0131}{\dotless{i}}
+ \DeclareUnicodeCharacter{0132}{IJ}
+ \DeclareUnicodeCharacter{0133}{ij}
+ \DeclareUnicodeCharacter{0134}{\^J}
+ \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}}
+ \DeclareUnicodeCharacter{0139}{\'L}
+ \DeclareUnicodeCharacter{013A}{\'l}
+
+ \DeclareUnicodeCharacter{0141}{\L}
+ \DeclareUnicodeCharacter{0142}{\l}
+ \DeclareUnicodeCharacter{0143}{\'N}
+ \DeclareUnicodeCharacter{0144}{\'n}
+ \DeclareUnicodeCharacter{0147}{\v{N}}
+ \DeclareUnicodeCharacter{0148}{\v{n}}
+ \DeclareUnicodeCharacter{014C}{\=O}
+ \DeclareUnicodeCharacter{014D}{\=o}
+ \DeclareUnicodeCharacter{014E}{\u{O}}
+ \DeclareUnicodeCharacter{014F}{\u{o}}
+
+ \DeclareUnicodeCharacter{0150}{\H{O}}
+ \DeclareUnicodeCharacter{0151}{\H{o}}
+ \DeclareUnicodeCharacter{0152}{\OE}
+ \DeclareUnicodeCharacter{0153}{\oe}
+ \DeclareUnicodeCharacter{0154}{\'R}
+ \DeclareUnicodeCharacter{0155}{\'r}
+ \DeclareUnicodeCharacter{0158}{\v{R}}
+ \DeclareUnicodeCharacter{0159}{\v{r}}
+ \DeclareUnicodeCharacter{015A}{\'S}
+ \DeclareUnicodeCharacter{015B}{\'s}
+ \DeclareUnicodeCharacter{015C}{\^S}
+ \DeclareUnicodeCharacter{015D}{\^s}
+ \DeclareUnicodeCharacter{015E}{\cedilla{S}}
+ \DeclareUnicodeCharacter{015F}{\cedilla{s}}
+
+ \DeclareUnicodeCharacter{0160}{\v{S}}
+ \DeclareUnicodeCharacter{0161}{\v{s}}
+ \DeclareUnicodeCharacter{0162}{\cedilla{t}}
+ \DeclareUnicodeCharacter{0163}{\cedilla{T}}
+ \DeclareUnicodeCharacter{0164}{\v{T}}
+
+ \DeclareUnicodeCharacter{0168}{\~U}
+ \DeclareUnicodeCharacter{0169}{\~u}
+ \DeclareUnicodeCharacter{016A}{\=U}
+ \DeclareUnicodeCharacter{016B}{\=u}
+ \DeclareUnicodeCharacter{016C}{\u{U}}
+ \DeclareUnicodeCharacter{016D}{\u{u}}
+ \DeclareUnicodeCharacter{016E}{\ringaccent{U}}
+ \DeclareUnicodeCharacter{016F}{\ringaccent{u}}
+
+ \DeclareUnicodeCharacter{0170}{\H{U}}
+ \DeclareUnicodeCharacter{0171}{\H{u}}
+ \DeclareUnicodeCharacter{0174}{\^W}
+ \DeclareUnicodeCharacter{0175}{\^w}
+ \DeclareUnicodeCharacter{0176}{\^Y}
+ \DeclareUnicodeCharacter{0177}{\^y}
+ \DeclareUnicodeCharacter{0178}{\"Y}
+ \DeclareUnicodeCharacter{0179}{\'Z}
+ \DeclareUnicodeCharacter{017A}{\'z}
+ \DeclareUnicodeCharacter{017B}{\dotaccent{Z}}
+ \DeclareUnicodeCharacter{017C}{\dotaccent{z}}
+ \DeclareUnicodeCharacter{017D}{\v{Z}}
+ \DeclareUnicodeCharacter{017E}{\v{z}}
+
+ \DeclareUnicodeCharacter{01C4}{D\v{Z}}
+ \DeclareUnicodeCharacter{01C5}{D\v{z}}
+ \DeclareUnicodeCharacter{01C6}{d\v{z}}
+ \DeclareUnicodeCharacter{01C7}{LJ}
+ \DeclareUnicodeCharacter{01C8}{Lj}
+ \DeclareUnicodeCharacter{01C9}{lj}
+ \DeclareUnicodeCharacter{01CA}{NJ}
+ \DeclareUnicodeCharacter{01CB}{Nj}
+ \DeclareUnicodeCharacter{01CC}{nj}
+ \DeclareUnicodeCharacter{01CD}{\v{A}}
+ \DeclareUnicodeCharacter{01CE}{\v{a}}
+ \DeclareUnicodeCharacter{01CF}{\v{I}}
+
+ \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}}
+ \DeclareUnicodeCharacter{01D1}{\v{O}}
+ \DeclareUnicodeCharacter{01D2}{\v{o}}
+ \DeclareUnicodeCharacter{01D3}{\v{U}}
+ \DeclareUnicodeCharacter{01D4}{\v{u}}
+
+ \DeclareUnicodeCharacter{01E2}{\={\AE}}
+ \DeclareUnicodeCharacter{01E3}{\={\ae}}
+ \DeclareUnicodeCharacter{01E6}{\v{G}}
+ \DeclareUnicodeCharacter{01E7}{\v{g}}
+ \DeclareUnicodeCharacter{01E8}{\v{K}}
+ \DeclareUnicodeCharacter{01E9}{\v{k}}
+
+ \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}}
+ \DeclareUnicodeCharacter{01F1}{DZ}
+ \DeclareUnicodeCharacter{01F2}{Dz}
+ \DeclareUnicodeCharacter{01F3}{dz}
+ \DeclareUnicodeCharacter{01F4}{\'G}
+ \DeclareUnicodeCharacter{01F5}{\'g}
+ \DeclareUnicodeCharacter{01F8}{\`N}
+ \DeclareUnicodeCharacter{01F9}{\`n}
+ \DeclareUnicodeCharacter{01FC}{\'{\AE}}
+ \DeclareUnicodeCharacter{01FD}{\'{\ae}}
+ \DeclareUnicodeCharacter{01FE}{\'{\O}}
+ \DeclareUnicodeCharacter{01FF}{\'{\o}}
+
+ \DeclareUnicodeCharacter{021E}{\v{H}}
+ \DeclareUnicodeCharacter{021F}{\v{h}}
+
+ \DeclareUnicodeCharacter{0226}{\dotaccent{A}}
+ \DeclareUnicodeCharacter{0227}{\dotaccent{a}}
+ \DeclareUnicodeCharacter{0228}{\cedilla{E}}
+ \DeclareUnicodeCharacter{0229}{\cedilla{e}}
+ \DeclareUnicodeCharacter{022E}{\dotaccent{O}}
+ \DeclareUnicodeCharacter{022F}{\dotaccent{o}}
+
+ \DeclareUnicodeCharacter{0232}{\=Y}
+ \DeclareUnicodeCharacter{0233}{\=y}
+ \DeclareUnicodeCharacter{0237}{\dotless{j}}
+
+ \DeclareUnicodeCharacter{1E02}{\dotaccent{B}}
+ \DeclareUnicodeCharacter{1E03}{\dotaccent{b}}
+ \DeclareUnicodeCharacter{1E04}{\udotaccent{B}}
+ \DeclareUnicodeCharacter{1E05}{\udotaccent{b}}
+ \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}}
+ \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}}
+ \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}}
+ \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}}
+ \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}}
+ \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}}
+ \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}}
+ \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}}
+
+ \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}}
+ \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}}
+
+ \DeclareUnicodeCharacter{1E20}{\=G}
+ \DeclareUnicodeCharacter{1E21}{\=g}
+ \DeclareUnicodeCharacter{1E22}{\dotaccent{H}}
+ \DeclareUnicodeCharacter{1E23}{\dotaccent{h}}
+ \DeclareUnicodeCharacter{1E24}{\udotaccent{H}}
+ \DeclareUnicodeCharacter{1E25}{\udotaccent{h}}
+ \DeclareUnicodeCharacter{1E26}{\"H}
+ \DeclareUnicodeCharacter{1E27}{\"h}
+
+ \DeclareUnicodeCharacter{1E30}{\'K}
+ \DeclareUnicodeCharacter{1E31}{\'k}
+ \DeclareUnicodeCharacter{1E32}{\udotaccent{K}}
+ \DeclareUnicodeCharacter{1E33}{\udotaccent{k}}
+ \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}}
+ \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}}
+ \DeclareUnicodeCharacter{1E36}{\udotaccent{L}}
+ \DeclareUnicodeCharacter{1E37}{\udotaccent{l}}
+ \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}}
+ \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}}
+ \DeclareUnicodeCharacter{1E3E}{\'M}
+ \DeclareUnicodeCharacter{1E3F}{\'m}
+
+ \DeclareUnicodeCharacter{1E40}{\dotaccent{M}}
+ \DeclareUnicodeCharacter{1E41}{\dotaccent{m}}
+ \DeclareUnicodeCharacter{1E42}{\udotaccent{M}}
+ \DeclareUnicodeCharacter{1E43}{\udotaccent{m}}
+ \DeclareUnicodeCharacter{1E44}{\dotaccent{N}}
+ \DeclareUnicodeCharacter{1E45}{\dotaccent{n}}
+ \DeclareUnicodeCharacter{1E46}{\udotaccent{N}}
+ \DeclareUnicodeCharacter{1E47}{\udotaccent{n}}
+ \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}}
+ \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}}
+
+ \DeclareUnicodeCharacter{1E54}{\'P}
+ \DeclareUnicodeCharacter{1E55}{\'p}
+ \DeclareUnicodeCharacter{1E56}{\dotaccent{P}}
+ \DeclareUnicodeCharacter{1E57}{\dotaccent{p}}
+ \DeclareUnicodeCharacter{1E58}{\dotaccent{R}}
+ \DeclareUnicodeCharacter{1E59}{\dotaccent{r}}
+ \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}}
+ \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}}
+ \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}}
+ \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}}
+
+ \DeclareUnicodeCharacter{1E60}{\dotaccent{S}}
+ \DeclareUnicodeCharacter{1E61}{\dotaccent{s}}
+ \DeclareUnicodeCharacter{1E62}{\udotaccent{S}}
+ \DeclareUnicodeCharacter{1E63}{\udotaccent{s}}
+ \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}}
+ \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}}
+ \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}}
+ \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}}
+ \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}}
+ \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}}
+
+ \DeclareUnicodeCharacter{1E7C}{\~V}
+ \DeclareUnicodeCharacter{1E7D}{\~v}
+ \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}}
+ \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}}
+
+ \DeclareUnicodeCharacter{1E80}{\`W}
+ \DeclareUnicodeCharacter{1E81}{\`w}
+ \DeclareUnicodeCharacter{1E82}{\'W}
+ \DeclareUnicodeCharacter{1E83}{\'w}
+ \DeclareUnicodeCharacter{1E84}{\"W}
+ \DeclareUnicodeCharacter{1E85}{\"w}
+ \DeclareUnicodeCharacter{1E86}{\dotaccent{W}}
+ \DeclareUnicodeCharacter{1E87}{\dotaccent{w}}
+ \DeclareUnicodeCharacter{1E88}{\udotaccent{W}}
+ \DeclareUnicodeCharacter{1E89}{\udotaccent{w}}
+ \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}}
+ \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}}
+ \DeclareUnicodeCharacter{1E8C}{\"X}
+ \DeclareUnicodeCharacter{1E8D}{\"x}
+ \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}}
+ \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}}
+
+ \DeclareUnicodeCharacter{1E90}{\^Z}
+ \DeclareUnicodeCharacter{1E91}{\^z}
+ \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}}
+ \DeclareUnicodeCharacter{1E93}{\udotaccent{z}}
+ \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}}
+ \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}}
+ \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}}
+ \DeclareUnicodeCharacter{1E97}{\"t}
+ \DeclareUnicodeCharacter{1E98}{\ringaccent{w}}
+ \DeclareUnicodeCharacter{1E99}{\ringaccent{y}}
+
+ \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}}
+ \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}}
+
+ \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}}
+ \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}}
+ \DeclareUnicodeCharacter{1EBC}{\~E}
+ \DeclareUnicodeCharacter{1EBD}{\~e}
+
+ \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}}
+ \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}}
+ \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}}
+ \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}}
+
+ \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}}
+ \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}}
+
+ \DeclareUnicodeCharacter{1EF2}{\`Y}
+ \DeclareUnicodeCharacter{1EF3}{\`y}
+ \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}}
+
+ \DeclareUnicodeCharacter{1EF8}{\~Y}
+ \DeclareUnicodeCharacter{1EF9}{\~y}
+
+ \DeclareUnicodeCharacter{2013}{--}
+ \DeclareUnicodeCharacter{2014}{---}
+ \DeclareUnicodeCharacter{2022}{\bullet}
+ \DeclareUnicodeCharacter{2026}{\dots}
+ \DeclareUnicodeCharacter{20AC}{\euro}
+
+ \DeclareUnicodeCharacter{2192}{\expansion}
+ \DeclareUnicodeCharacter{21D2}{\result}
+
+ \DeclareUnicodeCharacter{2212}{\minus}
+ \DeclareUnicodeCharacter{2217}{\point}
+ \DeclareUnicodeCharacter{2261}{\equiv}
+}% end of \utfeightchardefs
+
+
+% US-ASCII character definitions.
+\def\asciichardefs{% nothing need be done
+ \relax
+}
+
+% Make non-ASCII characters printable again for compatibility with
+% existing Texinfo documents that may use them, even without declaring a
+% document encoding.
+%
+\setnonasciicharscatcode \other
+
+
+\message{formatting,}
+
\newdimen\defaultparindent \defaultparindent = 15pt
\chapheadingskip = 15pt plus 4pt minus 2pt
% \otherifyactive is called near the end of this file.
\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
+% Used sometimes to turn off (effectively) the active characters even after
+% parsing them.
+\def\turnoffactive{%
+ \normalturnoffactive
+ \otherbackslash
+}
+
\catcode`\@=0
% \backslashcurfont outputs one backslash character in current font,
\global\chardef\backslashcurfont=`\\
\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work
-% \rawbackslash defines an active \ to do \backslashcurfont.
-% \otherbackslash defines an active \ to be a literal `\' character with
-% catcode other.
-{\catcode`\\=\active
- @gdef@rawbackslash{@let\=@backslashcurfont}
- @gdef@otherbackslash{@let\=@realbackslash}
-}
-
% \realbackslash is an actual character `\' with catcode other, and
% \doublebackslash is two of them (for the pdf outlines).
{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
-% \normalbackslash outputs one backslash in fixed width font.
-\def\normalbackslash{{\tt\backslashcurfont}}
-
+% In texinfo, backslash is an active character; it prints the backslash
+% in fixed width font.
\catcode`\\=\active
+@def@normalbackslash{{@tt@backslashcurfont}}
+% On startup, @fixbackslash assigns:
+% @let \ = @normalbackslash
+
+% \rawbackslash defines an active \ to do \backslashcurfont.
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.
+@gdef@rawbackslash{@let\=@backslashcurfont}
+@gdef@otherbackslash{@let\=@realbackslash}
-% Used sometimes to turn off (effectively) the active characters
-% even after parsing them.
-@def@turnoffactive{%
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.
+%
+@def@normalturnoffactive{%
+ @let\=@normalbackslash
@let"=@normaldoublequote
- @let\=@realbackslash
@let~=@normaltilde
@let^=@normalcaret
@let_=@normalunderscore
@unsepspaces
}
-% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'. (Thus, \ is not expandable when this is in
-% effect.)
-%
-@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash}
-
% Make _ and + \other characters, temporarily.
% This is canceled by @fixbackslash.
@otherifyactive
@global@let\ = @eatinput
% On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\{ in the file would cause an error. This macro tries to fix
+% the first `\' in the file would cause an error. This macro tries to fix
% that, assuming it is called before the first `\' could plausibly occur.
% Also turn back on active characters that might appear in the input
% file name, in case not using a pre-dumped format.
projects / gnulib.git / blobdiff