% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2007-06-16.10}
+\def\texinfoversion{2007-07-05.10}
%
-% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 2007,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
% 2007 Free Software Foundation, Inc.
%
% This texinfo.tex file is free software; you can redistribute it and/or
% modify it under the terms of the GNU General Public License as
-% published by the Free Software Foundation; either version 2, or (at
-% your option) any later version.
+% published by the Free Software Foundation; either version 3 of the
+% License, or (at your option) any later version.
%
% This texinfo.tex file is distributed in the hope that it will be
% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
% General Public License for more details.
%
% You should have received a copy of the GNU General Public License
-% along with this texinfo.tex file; see the file COPYING. If not, write
-% to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-% Boston, MA 02110-1301, USA.
+% along with this program. If not, see <http://www.gnu.org/licenses/>.
%
% As a special exception, when this file is read by TeX when processing
% a Texinfo source document, you may use the result without
% marginal hacks, juha@viisa.uucp (Juha Takala)
\ifvoid\margin\else % marginal info is present
\rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
-\dimen@=\dp#1 \unvbox#1
+\dimen@=\dp#1\relax \unvbox#1\relax
\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
}
output) for that.)}
\ifpdf
- \input pdfcolor
+ %
+ % Color manipulation macros from pdfcolor.tex.
+ \def\cmykDarkRed{0.28 1 1 0.35}
+ \def\cmykBlack{0 0 0 1}
+ %
+ \def\pdfsetcolor#1{\pdfliteral{#1 k}}
+ \def\setcolor#1{\mark{#1}\pdfsetcolor{#1}}
+ %
+ \def\maincolor{\cmykBlack}
+ \pdfsetcolor{\maincolor}
+ %
+ \def\makefootline{
+ \baselineskip24pt
+ \line{\pdfsetcolor{\maincolor}\the\footline}}
+ %
+ \def\makeheadline{%
+ \edef\M{\topmark}
+ \ifx\M\empty\let\M=\maincolor\fi
+ \vbox to 0pt{\vskip-22.5pt
+ \line{\vbox to8.5pt{}%
+ \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\M}}\vss}%
+ \nointerlineskip}
+ %
+ %
\pdfcatalog{/PageMode /UseOutlines}
%
% #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
%
% by default, use a color that is dark enough to print on paper as
% nearly black, but still distinguishable for online viewing.
- % (Defined in pdfcolor.tex.)
- \let\urlcolor = \BrickRed
- \let\linkcolor = \BrickRed
- \def\endlink{\Black\pdfendlink}
+ \def\urlcolor{\cmykDarkRed}
+ \def\linkcolor{\cmykDarkRed}
+ \def\endlink{\setcolor{\maincolor}\pdfendlink}
%
% Adding outlines to PDF; macros for calculating structure of outlines
% come from Petr Olsak
\def\@{@}%
\let\/=\empty
\makevalueexpandable
- \leavevmode\urlcolor
+ \leavevmode\setcolor{\urlcolor}%
\startlink attr{/Border [0 0 0]}%
user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
\endgroup}
{\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
\def\pdflink#1{%
\startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
- \linkcolor #1\endlink}
+ \setcolor{\linkcolor}#1\endlink}
\def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
\else
\let\pdfmkdest = \gobble
\let\pdfurl = \gobble
\let\endlink = \relax
- \let\linkcolor = \relax
+ \let\setcolor = \gobble
+ \let\pdfsetcolor = \gobble
\let\pdfmakeoutlines = \relax
\fi % \ifx\pdfoutput
%
% If \lastskip is nonzero, that means the last item was a
% skip. And since a skip is discardable, that means this
- % -\skip0 glue we're inserting is preceded by a
+ % -\whatsitskip glue we're inserting is preceded by a
% non-discardable item, therefore it is not a potential
% breakpoint, therefore no \nobreak needed.
\ifx\lastskipmacro\zeroskipmacro
\donoderef{#2}%
%
% Typeset the actual heading.
+ \nobreak % Avoid page breaks at the interline glue.
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
\hangindent=\wd0 \centerparametersmaybe
\unhbox0 #1\par}%
% all characters are catcode 10, 11 or 12, except \ which is active
% (as in normal texinfo). It is necessary to change the definition of \.
+% Non-ASCII encodings make 8-bit characters active, so un-activate
+% them to avoid their expansion. Must do this non-globally, to
+% confine the change to the current group.
+
% It's necessary to have hard CRs when the macro is executed. This is
% done by making ^^M (\endlinechar) catcode 12 when reading the macro
% body, and then making it the \newlinechar in \scanmacro.
\catcode`\_=\other
\catcode`\|=\other
\catcode`\~=\other
+ \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi
}
\def\scanargctxt{%
goto name{\pdfmkpgn{\pdfxrefdest}}%
\fi
}%
- \linkcolor
+ \setcolor{\linkcolor}%
\fi
%
% Float references are printed completely differently: "Figure 1.2"
% @documentlanguage is usually given very early, just after
% @setfilename. If done too late, it may not override everything
-% properly. Single argument is the language abbreviation.
-% It would be nice if we could set up a hyphenation file here.
+% properly. Single argument is the language (de) or locale (de_DE)
+% abbreviation. It would be nice if we could set up a hyphenation file.
%
-\parseargdef\documentlanguage{%
+{
+ \catcode`\_ = \active
+ \globaldefs=1
+\parseargdef\documentlanguage{\begingroup
+ \let_=\normalunderscore % normal _ character for filenames
\tex % read txi-??.tex file in plain TeX.
- % Read the file if it exists.
+ % Read the file by the name they passed if it exists.
\openin 1 txi-#1.tex
\ifeof 1
- \errhelp = \nolanghelp
- \errmessage{Cannot read language file txi-#1.tex}%
+ \documentlanguagetrywithoutunderscore{#1_\finish}%
\else
\input txi-#1.tex
\fi
\closein 1
\endgroup
+\endgroup}
}
+%
+% If they passed de_DE, and txi-de_DE.tex doesn't exist,
+% try txi-de.tex.
+%
+\def\documentlanguagetrywithoutunderscore#1_#2\finish{%
+ \openin 1 txi-#1.tex
+ \ifeof 1
+ \errhelp = \nolanghelp
+ \errmessage{Cannot read language file txi-#1.tex}%
+ \else
+ \input txi-#1.tex
+ \fi
+ \closein 1
+}
+%
\newhelp\nolanghelp{The given language definition file cannot be found or
is empty. Maybe you need to install it? In the current directory
should work if nowhere else does.}
\def\setnonasciicharscatcode#1{%
\count255=128
\loop\ifnum\count255<256
- \global\catcode\count255=#1
+ \global\catcode\count255=#1\relax
+ \advance\count255 by 1
+ \repeat
+}
+
+\def\setnonasciicharscatcodenonglobal#1{%
+ \count255=128
+ \loop\ifnum\count255<256
+ \catcode\count255=#1\relax
\advance\count255 by 1
\repeat
}
\ifpdf
\pdfpageheight #7\relax
\pdfpagewidth #8\relax
+ % if we don't reset these, they will remain at "1 true in" of
+ % whatever layout pdftex was dumped with.
+ \pdfhorigin = 1 true in
+ \pdfvorigin = 1 true in
\fi
%
\setleading{\textleading}
\parskip = 3pt plus 2pt minus 1pt
\setleading{\textleading}%
%
- \dimen0 = #1
+ \dimen0 = #1\relax
\advance\dimen0 by \voffset
%
\dimen2 = \hsize
projects / gnulib.git / blobdiff