* gnulib-tool (Usage): Fix --import, from

[gnulib.git] / build-aux / texinfo.tex

diff --git a/build-aux/texinfo.tex b/build-aux/texinfo.tex
index dd253a1..9b55ebe 100644 (file)
--- a/build-aux/texinfo.tex
+++ b/build-aux/texinfo.tex
@@ -3,11 +3,11 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2005-08-15.08}
+\def\texinfoversion{2006-01-27.14}
 %
 % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software
-% Foundation, Inc.
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free
+% Software Foundation, Inc.
 %
 % This texinfo.tex file is free software; you can redistribute it and/or
 % modify it under the terms of the GNU General Public License as
@@ -293,6 +293,13 @@
     % before the \shipout runs.
     %
     \indexdummies         % don't expand commands in the output.
+    \normalturnoffactive  % \ in index entries must not stay \, e.g., if
+               % the page break happens to be in the middle of an example.
+               % We don't want .vr (or whatever) entries like this:
+               % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
+               % "\acronym" won't work when it's read back in;
+               % it needs to be 
+               % {\code {{\tt \backslashcurfont }acronym}
     \shipout\vbox{%
       % Do this early so pdf references go to the beginning of the page.
       \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
@@ -1385,9 +1392,17 @@ where each line of input produces a line of output.}
   \else
     \let \startlink \pdfstartlink
   \fi
+  % make a live url in pdf output.
   \def\pdfurl#1{%
     \begingroup
-      \normalturnoffactive\def\@{@}%
+      % it seems we really need yet another set of dummies; have not
+      % tried to figure out what each command should do in the context
+      % of @url.  for now, just make @/ a no-op, that's the only one
+      % people have actually reported a problem with.
+      % 
+      \normalturnoffactive
+      \def\@{@}%
+      \let\/=\empty
       \makevalueexpandable
       \leavevmode\Red
       \startlink attr{/Border [0 0 0]}%
@@ -2963,8 +2978,11 @@ where each line of input produces a line of output.}
     % #1 contains the command name as a string, e.g., `ifinfo'.
     %
     % Define a command to find the next `@end #1', which must be on a line
-    % by itself.
-    \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}%
+    % by itself.  Ignore anything after the `#1'; this matters in
+    % verbatim environments, where otherwise the newline after an
+    % ignored conditional would result in a blank line in the output.
+    \long\def\doignoretext##1^^M@end #1##2^^M{%
+      \doignoretextyyy##1^^M@#1\_STOP_}%
     % And this command to find another #1 command, at the beginning of a
     % line.  (Otherwise, we would consider a line `@c @ifset', for
     % example, to count as an @ifset for nesting.)
@@ -4486,13 +4504,21 @@ where each line of input produces a line of output.}
       \gdef\thissection{#1}%
     \fi\fi\fi
     %
-    % Write the toc entry (before \donoderef).  See comments in \chfplain.
+    % Write the toc entry (before \donoderef).  See comments in \chapmacro.
     \writetocentry{\toctype\sectionlevel}{#1}{#4}%
     %
     % Write the node reference (= pdf destination for pdftex).
-    % Again, see comments in \chfplain.
+    % Again, see comments in \chapmacro.
     \donoderef{#3}%
     %
+    % Interline glue will be inserted when the vbox is completed.
+    % That glue will be a valid breakpoint for the page, since it'll be
+    % preceded by a whatsit (usually from the \donoderef, or from the
+    % \writetocentry if there was no node).  We don't want to allow that
+    % break, since then the whatsits could end up on page n while the
+    % section is on page n+1, thus toc/etc. are wrong.  Debian bug 276000.
+    \nobreak
+    %
     % Output the actual section heading.
     \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
           \hangindent=\wd0  % zero if no section number
@@ -4555,7 +4581,7 @@ where each line of input produces a line of output.}
        \edef\temp{%
          \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
        \temp
-      }
+      }%
     \fi
   \fi
   %
@@ -7102,22 +7128,6 @@ should work if nowhere else does.}
 % \otherifyactive is called near the end of this file.
 \def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
 
-% Same as @turnoffactive below, but backslash retains it's normal definition.
-% (Before 2004-08-15, this macro explicitly assigned @let\=@normalbackslash,
-% but it doesn't seem to be necessary. --kasal)
-\def\normalturnoffactive{%
-  \let"=\normaldoublequote
-  \let~=\normaltilde
-  \let^=\normalcaret
-  \let_=\normalunderscore
-  \let|=\normalverticalbar
-  \let<=\normalless
-  \let>=\normalgreater
-  \let+=\normalplus
-  \let$=\normaldollar %$ font-lock fix
-  \unsepspaces
-}
-
 % Used sometimes to turn off (effectively) the active characters even after
 % parsing them.
 \def\turnoffactive{%
@@ -7149,6 +7159,23 @@ should work if nowhere else does.}
 @gdef@rawbackslash{@let\=@backslashcurfont}
 @gdef@otherbackslash{@let\=@realbackslash}
 
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.
+% 
+@def@normalturnoffactive{%
+  @let\=@normalbackslash
+  @let"=@normaldoublequote
+  @let~=@normaltilde
+  @let^=@normalcaret
+  @let_=@normalunderscore
+  @let|=@normalverticalbar
+  @let<=@normalless
+  @let>=@normalgreater
+  @let+=@normalplus
+  @let$=@normaldollar %$ font-lock fix
+  @unsepspaces
+}
+
 % Make _ and + \other characters, temporarily.
 % This is canceled by @fixbackslash.
 @otherifyactive