#!/bin/sh
-#
# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
+
+scriptversion=2004-07-05.00
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
-# Copyright 1991 by the Massachusetts Institute of Technology
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
+#
+# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
-
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
-
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
+chowncmd=
+chgrpcmd=
+stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd=$cpprog
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "$0: no input file specified" >&2
- exit 1
-else
- :
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d "$dst" ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=$mkdirprog
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f "$src" ] || [ -d "$src" ]
- then
- :
- else
- echo "$0: $src does not exist" >&2
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "$0: no destination specified" >&2
- exit 1
- else
- :
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d "$dst" ]
- then
- dst=$dst/`basename "$src"`
- else
- :
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
- '
-IFS="${IFS-$defaultIFS}"
-
-oIFS=$IFS
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS=$oIFS
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp=$pathcomp$1
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+ case $1 in
+ -c) shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit 0;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t) dstarg=$2
shift
+ shift
+ continue;;
- if [ ! -d "$pathcomp" ] ;
- then
- $mkdirprog "$pathcomp"
- else
- :
- fi
-
- pathcomp=$pathcomp/
+ -T) no_target_directory=true
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit 0;;
+
+ *) # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ test -n "$dir_arg$dstarg" && break
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+ break;;
+ esac
done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd "$dst" &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename "$dst"`
- else
- dstfile=`basename "$dst" $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename "$dst"`
- else
- :
- fi
-
-# Make a couple of temp file names in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
- rmtmp=$dstdir/#rm.$$#
-
-# Trap to clean up temp files at exit.
-
- trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
- trap '(exit $?); exit' 1 2 13 15
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd "$src" "$dsttmp" &&
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
-
-# Now remove or move aside any old file at destination location. We try this
-# two ways since rm can't unlink itself on some systems and the destination
-# file might be busy for other reasons. In this case, the final cleanup
-# might fail but the new file should still install successfully.
-
-{
- if [ -f "$dstdir/$dstfile" ]
- then
- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
- $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
- {
- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
- (exit 1); exit
- }
- else
- :
- fi
-} &&
-
-# Now rename the file to the real destination.
+if test -z "$1"; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ src=
+
+ if test -d "$dst"; then
+ mkdircmd=:
+ chmodcmd=
+ else
+ mkdircmd=$mkdirprog
+ fi
+ else
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
-fi &&
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+ dst=$dst/`basename "$src"`
+ fi
+ fi
+
+ # This sed command emulates the dirname command.
+ dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+ # Make sure that the destination directory exists.
+
+ # Skip lots of stat calls in the usual case.
+ if test ! -d "$dstdir"; then
+ defaultIFS='
+ '
+ IFS="${IFS-$defaultIFS}"
+
+ oIFS=$IFS
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+ IFS=$oIFS
+
+ pathcomp=
+
+ while test $# -ne 0 ; do
+ pathcomp=$pathcomp$1
+ shift
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp"
+ # mkdir can fail with a `File exist' error in case several
+ # install-sh are creating the directory concurrently. This
+ # is OK.
+ test -d "$pathcomp" || exit
+ fi
+ pathcomp=$pathcomp/
+ done
+ fi
+
+ if test -n "$dir_arg"; then
+ $doit $mkdircmd "$dst" \
+ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+ else
+ dstfile=`basename "$dst"`
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Copy the file name to the temp name.
+ $doit $cpprog "$src" "$dsttmp" &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dstdir/$dstfile"; then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ || {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ }
+ }
+ fi || { (exit 1); exit; }
+done
# The final little trick to "correctly" pass the exit status to the exit trap.
-
{
- (exit 0); exit
+ (exit 0); exit
}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End: