% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2004-02-15.09}
+\def\texinfoversion{2004-06-17.17}
%
% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
% As a special exception, when this file is read by TeX when processing
% a Texinfo source document, you may use the result without
% restriction. (This has been our intent since Texinfo was invented.)
-%
+%
% Please try the latest version of texinfo.tex before submitting bug
% reports; you can get the latest version from:
% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
% It is possible to adapt texinfo.tex for other languages, to some
% extent. You can get the existing language-specific files from the
% full Texinfo distribution.
-%
+%
% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
% Hyphenation fixes.
\hyphenation{
- Flor-i-da Ghost-script Ghost-view Mac-OS Ra-dha-krish-nan
- ap-pen-dix bit-map data-base data-bases eshell fall-ing half-way
- long-est mini-buf-fer mini-buf-fers over-view par-a-digm
- rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces strong-est
- time-stamp which-ever white-space wide-spread wrap-around
+ Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
+ ap-pen-dix bit-map bit-maps
+ data-base data-bases eshell fall-ing half-way long-est man-u-script
+ man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
+ par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
+ spell-ing spell-ings
+ stand-alone strong-est time-stamp time-stamps which-ever white-space
+ wide-spread wrap-around
}
% Margin to add to right of even pages, to left of odd pages.
\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
% Define the framework for environments in texinfo.tex. It's used like this:
-%
+%
% \envdef\foo{...}
% \def\Efoo{...}
-%
+%
% It's the responsibility of \envdef to insert \begingroup before the
% actual body; @end closes the group after calling \Efoo. \envdef also
% defines \thisenv, so the current environment is known; @end checks
% whether the environment name matches. The \checkenv macro can also be
% used to check whether the current environment is the one expected.
-%
+%
% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
% are not treated as enviroments; they don't open a group. (The
% implementation of @end takes care not to call \endgroup in this
% The \TeX{} logo, as in plain, but resetting the spacing so that a
% period following counts as ending a sentence. (Idea found in latex.)
-%
+%
\edef\TeX{\TeX \spacefactor=3000 }
% @LaTeX{} logo. Not quite the same results as the definition in
% convenient for us to use an explicitly smaller font, rather than using
% the \scriptstyle font (since we don't reset \scriptstyle and
% \scriptscriptstyle).
-%
+%
\def\LaTeX{%
L\kern-.36em
{\setbox0=\hbox{T}%
% @comma{} is so commas can be inserted into text without messing up
% Texinfo's parsing.
-%
+%
\let\comma = ,
% @refill is a no-op.
\newif\ifpdf
\newif\ifpdfmakepagedest
+% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
+% can be set). So we test for \relax and 0 as well as \undefined,
+% borrowed from ifpdf.sty.
\ifx\pdfoutput\undefined
- \pdffalse
- \let\pdfmkdest = \gobble
- \let\pdfurl = \gobble
- \let\endlink = \relax
- \let\linkcolor = \relax
- \let\pdfmakeoutlines = \relax
\else
- \pdftrue
- \pdfoutput = 1
+ \ifx\pdfoutput\relax
+ \else
+ \ifcase\pdfoutput
+ \else
+ \pdftrue
+ \fi
+ \fi
+\fi
+%
+\ifpdf
\input pdfcolor
\pdfcatalog{/PageMode /UseOutlines}%
\def\dopdfimage#1#2#3{%
% of subentries (or empty, for subsubsections). #3 is the node
% text, which might be empty if this toc entry had no
% corresponding node. #4 is the page number.
- %
+ %
\def\dopdfoutline#1#2#3#4{%
% Generate a link to the node text if that exists; else, use the
% page number. We could generate a destination for the section
% Read toc second time, this time actually producing the outlines.
% The `-' means take the \expnumber as the absolute number of
% subentries, which we calculated on our first read of the .toc above.
- %
+ %
% We use the node names as the destinations.
\def\numchapentry##1##2##3##4{%
\dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
% since the encoding is unknown. For example, the eogonek from
% Latin 2 (0xea) gets translated to a | character. Info from
% Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
- %
+ %
% xx to do this right, we have to translate 8-bit characters to
% their "best" equivalent, based on the @documentencoding. Right
% now, I guess we'll just let the pdf reader have its way.
\startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
\linkcolor #1\endlink}
\def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-\fi % \ifx\pdfoutput
+\else
+ \let\pdfmkdest = \gobble
+ \let\pdfurl = \gobble
+ \let\endlink = \relax
+ \let\linkcolor = \relax
+ \let\pdfmakeoutlines = \relax
+\fi % \ifx\pdfoutput
\message{fonts,}
% Change the current font style to #1, remembering it in \curfontstyle.
% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
% italics, not bold italics.
-%
+%
\def\setfontstyle#1{%
\def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
\csname ten#1\endcsname % change the current font
}
% Select #1 fonts with the current style.
-%
+%
\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
\def\rm{\fam=0 \setfontstyle{rm}}
% of just \STYLE. We do this because \STYLE needs to also set the
% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire
% \tenSTYLE to set the current font.
-%
+%
% Each font-changing command also sets the names \lsize (one size lower)
% and \lllsize (three sizes lower). These relative commands are used in
% the LaTeX logo and acronyms.
-%
+%
% This all needs generalizing, badly.
-%
+%
\def\textfonts{%
\let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
\let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
\else{\tclose{\kbdfont\look}}\fi
\else{\tclose{\kbdfont\look}}\fi}
-% For @url, @env, @command quotes seem unnecessary, so use \code.
-\let\url=\code
+% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
+\let\indicateurl=\code
\let\env=\code
\let\command=\code
\endlink
\endgroup}
+% @url synonym for @uref, since that's how everyone uses it.
+%
+\let\url=\uref
+
% rms does not like angle brackets --karl, 17may97.
% So now @email is just like @uref, unless we are pdf.
%
}
% @pounds{} is a sterling sign, which is in the CM italic font.
-%
+%
\def\pounds{{\it\$}}
% @registeredsymbol - R in a circle. The font for the R should really
}$%
}
+% Laurent Siebenmann reports \Orb undefined with:
+% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38
+% so we'll define it if necessary.
+%
+\ifx\Orb\undefined
+\def\Orb{\mathhexbox20D}
+\fi
+
\message{page headings,}
}
% @author should come last, but may come many times.
+% It can also be used inside @quotation.
+%
\parseargdef\author{%
\def\temp{\quotation}%
\ifx\thisenv\temp
- This edition of the manual is dedicated to Karl Berry who should
- really make affiliations work.
+ \def\quotationauthor{#1}% printed in \Equotation.
\else
\checkenv\titlepage
\ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
% #1 is the @columnfraction, usually a decimal number like .5, but might
% be just 1. We just use it, whatever it is.
-%
+%
\def\pickupwholefraction#1 {%
\global\advance\colcount by 1
\expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
\doignorecount = 0
%
% Swallow text until we reach the matching `@end #1'.
- \dodoignore {#1}%
+ \dodoignore{#1}%
}
{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
\obeylines %
%
\gdef\dodoignore#1{%
- % #1 contains the string `ifinfo'.
+ % #1 contains the command name as a string, e.g., `ifinfo'.
%
% Define a command to find the next `@end #1', which must be on a line
% by itself.
}
% We have to swallow the remaining "\_STOP_".
-%
+%
\def\doignoretextzzz#1{%
\ifnum\doignorecount = 0 % We have just found the outermost @end.
\let\next\enddoignore
\def\definedummyletter##1{%
\expandafter\def\csname ##1\endcsname{\realbackslash ##1}%
}%
+ \let\definedummyaccent\definedummyletter
%
% Do the redefinitions.
\commondummies
\def\definedummyletter##1{%
\expandafter\def\csname ##1\endcsname{@##1}%
}%
+ \let\definedummyaccent\definedummyletter
%
% Do the redefinitions.
\commondummies
%
% Assorted special characters.
\definedummyword{bullet}%
+ \definedummyword{comma}%
\definedummyword{copyright}%
\definedummyword{registeredsymbol}%
\definedummyword{dots}%
\gdef\commondummiesnofonts{%
% Control letters and accents.
\definedummyletter{!}%
- \definedummyletter{"}%
- \definedummyletter{'}%
+ \definedummyaccent{"}%
+ \definedummyaccent{'}%
\definedummyletter{*}%
- \definedummyletter{,}%
+ \definedummyaccent{,}%
\definedummyletter{.}%
\definedummyletter{/}%
\definedummyletter{:}%
- \definedummyletter{=}%
+ \definedummyaccent{=}%
\definedummyletter{?}%
- \definedummyletter{^}%
- \definedummyletter{`}%
- \definedummyletter{~}%
+ \definedummyaccent{^}%
+ \definedummyaccent{`}%
+ \definedummyaccent{~}%
\definedummyword{u}%
\definedummyword{v}%
\definedummyword{H}%
% would be for a given command (usually its argument).
%
\def\indexnofonts{%
- \def\definedummyword##1{%
+ % Accent commands should become @asis.
+ \def\definedummyaccent##1{%
\expandafter\let\csname ##1\endcsname\asis
}%
- \let\definedummyletter=\definedummyword
+ % We can just ignore other control letters.
+ \def\definedummyletter##1{%
+ \expandafter\def\csname ##1\endcsname{}%
+ }%
+ % Hopefully, all control words can become @asis.
+ \let\definedummyword\definedummyaccent
%
\commondummiesnofonts
%
% Assorted special characters.
% (The following {} will end up in the sort string, but that's ok.)
\def\bullet{bullet}%
+ \def\comma{,}%
\def\copyright{copyright}%
\def\registeredsymbol{R}%
\def\dots{...}%
\def\point{.}%
\def\print{-|}%
\def\result{=>}%
+ %
+ % Don't write macro names.
+ \emptyusermacros
}
\let\indexbackslash=0 %overridden during \printindex.
% But this frozes the catcodes in the argument, and can cause problems to
% @code, which sets - active. This problem was fixed by a kludge---
% ``-'' was active throughout whole index, but this isn't really right.
-%
+%
% The right solution is to prevent \entry from swallowing the whole text.
% --kasal, 21nov03
\def\entry{%
% We do the following ugly conditional instead of the above simple
% construct for the sake of pdftex, which needs the actual
% letter in the expansion, not just typeset.
-%
+%
\def\appendixletter{%
\ifnum\appendixno=`A A%
\else\ifnum\appendixno=`B B%
\def\lowersections{\global\advance\secbase by 1}
\let\down=\lowersections % original BFox name
-% Choose a numbered-heading macro
-% #1 is heading level if unmodified by @raisesections or @lowersections
-% #2 is text for heading
-\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
- \chapterzzz{#2}%
- \or \seczzz{#2}%
- \or \numberedsubseczzz{#2}%
- \or \numberedsubsubseczzz{#2}%
+% we only have subsub.
+\chardef\maxseclevel = 3
+%
+% A numbered section within an unnumbered changes to unnumbered too.
+% To achive this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unmlevel = \maxseclevel
+%
+% Trace whether the current chapter is an appendix or not:
+% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
+\def\chapheadtype{N}
+
+% Choose a heading macro
+% #1 is heading type
+% #2 is heading level
+% #3 is text for heading
+\def\genhead#1#2#3{%
+ % Compute the abs. sec. level:
+ \absseclevel=#2
+ \advance\absseclevel by \secbase
+ % Make sure \absseclevel doesn't fall outside the range:
+ \ifnum \absseclevel < 0
+ \absseclevel = 0
\else
- \ifnum \absseclevel<0 \chapterzzz{#2}%
- \else \numberedsubsubseczzz{#2}%
+ \ifnum \absseclevel > 3
+ \absseclevel = 3
\fi
\fi
- \suppressfirstparagraphindent
-}
-
-% like \numhead, but chooses appendix heading levels
-\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
- \appendixzzz{#2}%
- \or \appendixsectionzzz{#2}%
- \or \appendixsubseczzz{#2}%
- \or \appendixsubsubseczzz{#2}%
+ % The heading type:
+ \def\headtype{#1}%
+ \if \headtype U%
+ \ifnum \absseclevel < \unmlevel
+ \chardef\unmlevel = \absseclevel
+ \fi
\else
- \ifnum \absseclevel<0 \appendixzzz{#2}%
- \else \appendixsubsubseczzz{#2}%
+ % Check for appendix sections:
+ \ifnum \absseclevel = 0
+ \edef\chapheadtype{\headtype}%
+ \else
+ \if \headtype A\if \chapheadtype N%
+ \errmessage{@appendix... within a non-appendix chapter}%
+ \fi\fi
+ \fi
+ % Check for numbered within unnumbered:
+ \ifnum \absseclevel > \unmlevel
+ \def\headtype{U}%
+ \else
+ \chardef\unmlevel = 3
\fi
\fi
- \suppressfirstparagraphindent
-}
-
-% like \numhead, but chooses numberless heading levels
-\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
- \ifcase\absseclevel
- \unnumberedzzz{#2}%
- \or \unnumberedseczzz{#2}%
- \or \unnumberedsubseczzz{#2}%
- \or \unnumberedsubsubseczzz{#2}%
+ % Now print the heading:
+ \if \headtype U%
+ \ifcase\absseclevel
+ \unnumberedzzz{#3}%
+ \or \unnumberedseczzz{#3}%
+ \or \unnumberedsubseczzz{#3}%
+ \or \unnumberedsubsubseczzz{#3}%
+ \fi
\else
- \ifnum \absseclevel<0 \unnumberedzzz{#2}%
- \else \unnumberedsubsubseczzz{#2}%
+ \if \headtype A%
+ \ifcase\absseclevel
+ \appendixzzz{#3}%
+ \or \appendixsectionzzz{#3}%
+ \or \appendixsubseczzz{#3}%
+ \or \appendixsubsubseczzz{#3}%
+ \fi
+ \else
+ \ifcase\absseclevel
+ \chapterzzz{#3}%
+ \or \seczzz{#3}%
+ \or \numberedsubseczzz{#3}%
+ \or \numberedsubsubseczzz{#3}%
+ \fi
\fi
\fi
\suppressfirstparagraphindent
}
+% an interface:
+\def\numhead{\genhead N}
+\def\apphead{\genhead A}
+\def\unnmhead{\genhead U}
+
% @chapter, @appendix, @unnumbered. Increment top-level counter, reset
% all lower-level sectioning counters to zero.
-%
+%
% Also set \chaplevelprefix, which we prepend to @float sequence numbers
% (e.g., figures), q.v. By default (before any chapter), that is empty.
\let\chaplevelprefix = \empty
-%
+%
\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
\def\chapterzzz#1{%
% section resetting is \global in case the chapter is in a group, such
\global\let\subsubsection = \appendixsubsubsec
}
-% @centerchap is like @unnumbered, but the heading is centered.
-\outer\parseargdef\centerchap{{\unnumberedyyy{#1}}}
-
\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
\def\unnumberedzzz#1{%
\global\secno=0 \global\subsecno=0 \global\subsubsecno=0
\global\let\subsubsection = \unnumberedsubsubsec
}
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\parseargdef\centerchap{%
+ % Well, we could do the following in a group, but that would break
+ % an assumption that \chapmacro is called at the outermost level.
+ % Thus we are safer this way: --kasal, 24feb04
+ \let\centerparametersmaybe = \centerparameters
+ \unnmhead0{#1}%
+ \let\centerparametersmaybe = \relax
+}
+
% @top is like @unnumbered.
\let\top\unnumbered
{\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
}
-% These are variants which are not "outer", so they can appear in @ifinfo.
-% Actually, they are now be obsolete; ordinary section commands should work.
-\def\infotop{\parsearg\unnumberedzzz}
-\def\infounnumbered{\parsearg\unnumberedzzz}
-\def\infounnumberedsec{\parsearg\unnumberedseczzz}
-\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
-\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
-
-\def\infoappendix{\parsearg\appendixzzz}
-\def\infoappendixsec{\parsearg\appendixseczzz}
-\def\infoappendixsubsec{\parsearg\appendixsubseczzz}
-\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
-
-\def\infochapter{\parsearg\chapterzzz}
-\def\infosection{\parsearg\sectionzzz}
-\def\infosubsection{\parsearg\subsectionzzz}
-\def\infosubsubsection{\parsearg\subsubsectionzzz}
-
% These macros control what the section commands do, according
% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
% Define them by default for a numbered chapter.
%%% Args are the skip and penalty (usually negative)
\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
-\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
-
%%% Define plain chapter starts, and page on/off switching for it
% Parameter controlling skip before chapter headings (if needed)
\CHAPPAGon
-\def\CHAPFplain{%
-\global\let\chapmacro=\chfplain
-\global\let\centerchapmacro=\centerchfplain}
-
-% Normal chapter opening.
-%
+% Chapter opening.
+%
% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
% Yappendix, Yomitfromtoc), #3 the chapter number.
-%
+%
% To test against our argument.
\def\Ynothingkeyword{Ynothing}
\def\Yomitfromtockeyword{Yomitfromtoc}
\def\Yappendixkeyword{Yappendix}
%
-\def\chfplain#1#2#3{%
+\def\chapmacro#1#2#3{%
\pchapsepmacro
{%
\chapfonts \rm
% @centerchap -- centered and unnumbered.
\let\centerparametersmaybe = \relax
-\def\centerchfplain#1{{%
- \def\centerparametersmaybe{%
- \advance\rightskip by 3\rightskip
- \leftskip = \rightskip
- \parfillskip = 0pt
- }%
- \chfplain{#1}{Ynothing}{}%
-}}
+\def\centerparameters{%
+ \advance\rightskip by 3\rightskip
+ \leftskip = \rightskip
+ \parfillskip = 0pt
+}
-\CHAPFplain % The default
% I don't think this chapter style is supported any more, so I'm not
% updating it with the new noderef stuff. We'll see. --karl, 11aug03.
-%
+%
+\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
+%
\def\unnchfopen #1{%
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
\parindent=0pt\raggedright
\rm #1\hfill}}\bigskip \par\nobreak
}
-
\def\chfopen #1#2{\chapoddpage {\chapfonts
\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
\par\penalty 5000 %
}
-
\def\centerchfopen #1{%
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
\parindent=0pt
\hfill {\rm #1}\hfill}}\bigskip \par\nobreak
}
-
\def\CHAPFopen{%
-\global\let\chapmacro=\chfopen
-\global\let\centerchapmacro=\centerchfopen}
+ \global\let\chapmacro=\chfopen
+ \global\let\centerchapmacro=\centerchfopen}
% Section titles. These macros combine the section number parts and
% call the generic \sectionheading to do the printing.
-%
+%
\newskip\secheadingskip
\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
% Print any size, any type, section title.
-%
+%
% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
% section number.
-%
+%
\def\sectionheading#1#2#3#4{%
{%
% Switch to the right set of fonts.
\newwrite\tocfile
% Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc.
-%
+% Called from @chapter, etc.
+%
% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
% We append the current node name (if any) and page number as additional
% arguments for the \{chap,sec,...}entry macros which will eventually
% read this. The node name is used in the pdf outlines as the
% destination to jump to.
-%
+%
% We open the .toc file for writing here instead of at @setfilename (or
% any other fixed time) so that @contents can be anywhere in the document.
% But if #1 is `omit', then we don't do anything. This is used for the
% But use \hss just in case.
% (This space doesn't include the extra space that gets added after
% the label; that gets put in by \shortchapentry above.)
- %
+ %
% We'd like to right-justify chapter numbers, but that looks strange
% with appendix letters. And right-justifying numbers and
% left-justifying letters looks strange when there is less than 10
% Appendices, in the main contents.
% Need the word Appendix, and a fixed-size box.
-%
+%
\def\appendixbox#1{%
% We use M since it's probably the widest letter.
\setbox0 = \hbox{\putwordAppendix{} M}%
% @quotation does normal linebreaking (hence we can't use \nonfillstart)
-% and narrows the margins.
+% and narrows the margins. We keep \parskip nonzero in general, since
+% we're doing normal filling. So, when using \aboveenvbreak and
+% \afterenvbreak, temporarily make \parskip 0.
%
\envdef\quotation{%
{\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
}
% We have retained a nonzero parskip for the environment, since we're
-% doing normal filling. So to avoid extra space below the environment...
-\def\Equotation{\parskip = 0pt \afterenvbreak}
+% doing normal filling.
+%
+\def\Equotation{%
+ \par
+ \ifx\quotationauthor\undefined\else
+ % indent a bit.
+ \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
+ \fi
+ {\parskip=0pt \afterenvbreak}%
+}
% If we're given an argument, typeset it in bold with a colon after.
\def\quotationlabel#1{%
% do \par.
%
% This messes up the normal definitions of @c[omment], so we redefine
-% it. Similarly for @ignore. (These commands are used in the gcc
+% them. Similarly for @ignore. (These commands are used in the gcc
% manual for man page generation.)
%
% Seems pretty fragile, most line-oriented commands will presumably
%
{\catcode`\^^M=\active %
\gdef\insertcopying{\begingroup %
- \parindent = 0pt % looks wrong on title page
+ \parindent = 0pt % paragraph indentation looks wrong on title page
\def^^M{%
\ifnum \lastpenalty=1 %
\par %
% #1 is the category, such as "Function".
% #2 is the return type, if any.
% #3 is the function name.
-%
+%
% We are followed by (but not passed) the arguments, if any.
%
\def\defname#1#2#3{%
% arguments will be output next, if any.
}
-% Print arguments in slanted typewriter, prevent hyphenation at `-' chars.
-%
+% Print arguments in slanted roman (not ttsl), inconsistently with using
+% tt for the name. This is because literal text is sometimes needed in
+% the argument list (groff manual), and ttsl and tt are not very
+% distinguishable. Prevent hyphenation at `-' chars.
+%
\def\defunargs#1{%
- % use sl by default (not ttsl), inconsistently with using tt for the
- % name. This is because literal text is sometimes needed in the
- % argument list (groff manual), and ttsl and tt are not very
- % distinguishable.
+ % use sl by default (not ttsl),
% tt for the names.
\df \sl \hyphenchar\font=0
+ %
% On the other hand, if an argument has two dashes (for instance), we
% want a way to get ttsl. Let's try @var for that.
\let\var=\ttslanted
\expandafter\parsearg
\fi \next}
-% We mant to disable all macros during \shipout so that they are not
+% We want to disable all macros during \shipout so that they are not
% expanded by \write.
\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
\edef\next{\macrolist}\expandafter\endgroup\next}
+% For \indexnofonts, we need to get rid of all macros, leaving only the
+% arguments (if present). Of course this is not nearly correct, but it
+% is the best we can do for now. makeinfo does not expand macros in the
+% argument to @deffn, which ends up writing an index entry, and texindex
+% isn't prepared for an index sort entry that starts with \.
+%
+% Since macro invocations are followed by braces, we can just redefine them
+% to take a single TeX argument. The case of a macro invocation that
+% goes to end-of-line is not handled.
+%
+\def\emptyusermacros{\begingroup
+ \def\do##1{\let\noexpand##1=\noexpand\asis}%
+ \edef\next{\macrolist}\expandafter\endgroup\next}
+
% @alias.
% We need some trickery to remove the optional spaces around the equal
node \samp{\ignorespaces#1{}}}
% @node's only job in TeX is to define \lastnode, which is used in
-% cross-references.
-\parseargdef\node{\checkenv{}\nodexxx #1,\finishnodeparse}
-\def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+% cross-references. The @node line might or might not have commas, and
+% might or might not have spaces before the first comma, like:
+% @node foo , bar , ...
+% We don't want such trailing spaces in the node name.
+%
+\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
+%
+% also remove a trailing comma, in case of something like this:
+% @node Help-Cross, , , Cross-refs
+\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
+\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+
\let\nwnode=\node
\let\lastnode=\empty
% Write a cross-reference definition for the current node. #1 is the
% type (Ynumbered, Yappendix, Ynothing).
-%
+%
\def\donoderef#1{%
\ifx\lastnode\empty\else
\setref{\lastnode}{#1}%
% 2) NAME-snt - section number and type, passed as the SNT arg, or
% empty for anchors.
% 3) NAME-pg - the page number.
-%
+%
% This is called from \donoderef, \anchor, and \dofloat. In the case of
% floats, there is an additional part, which is not written here:
% 4) NAME-lof - the text as it should appear in a @listoffloats.
-%
+%
\def\setref#1#2{%
\pdfmkdest{#1}%
\iflinks
\fi
%
% if the user also gave the printed manual name (fifth arg), append
- % "in MANUALNAME".
+ % "in MANUALNAME".
\ifdim \wd1 > 0pt
\space \putwordin{} \cite{\printedmanual}%
\fi
\else
% node/anchor (non-float) references.
- %
+ %
% If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
% insert empty discretionaries after hyphens, which means that it will
% not find a line break at a hyphen in a node names. Since some manuals
% it was a float, and we have the (safe) float type in \iffloattype.
\expandafter\let\expandafter\floatlist
\csname floatlist\iffloattype\endcsname
- %
+ %
% Is this the first time we've seen this float type?
\expandafter\ifx\floatlist\relax
\toks0 = {\do}% yes, so just \do
}
% Read the last existing aux file, if any. No error if none exists.
-%
+%
\def\tryauxfile{%
\openin 1 \jobname.aux
\ifeof 1 \else
% @float FLOATTYPE,LOC ... @end float for displayed figures, tables, etc.
% We don't actually implement floating yet, we just plop the float "here".
% But it seemed the best name for the future.
-%
+%
\envparseargdef\float{\dofloat #1,,,\finish}
% #1 is the optional FLOATTYPE, the text label for this float, typically
% "Figure", "Table", "Example", etc. Can't contain commas. If omitted,
% this float will not be numbered and cannot be referred to.
-%
+%
% #2 is the optional xref label. Also must be present for the float to
% be referable.
-%
+%
% #3 is the optional positioning argument; for now, it is ignored. It
% will somehow specify the positions allowed to float to (here, top, bottom).
-%
+%
% We keep a separate counter for each FLOATTYPE, which we reset at each
% chapter-level command.
\let\resetallfloatnos=\empty
% don't lose footnotes inside @float.
\startsavinginserts
%
+ % We can't be used inside a paragraph.
+ \par
+ %
\vtop\bgroup
\def\floattype{#1}%
\def\floatlabel{#2}%
\ifx\floatlabel\empty \else
% We want each FLOATTYPE to be numbered separately (Figure 1,
% Table 1, Figure 2, ...). (And if no label, no number.)
- %
+ %
\expandafter\getfloatno\csname\safefloattype floatno\endcsname
\global\advance\floatno by 1
%
% labels (which have a completely different output format) from
% node and anchor labels. And \xrdef uses it to construct the
% lists of floats.
- %
+ %
\edef\thissection{\floatmagic=\safefloattype}%
\setref{\floatlabel}{Yfloat}%
}%
}
% Append the tokens #2 to the definition of macro #1, not expanding either.
-%
+%
\newtoks\appendtomacroAtoks
\newtoks\appendtomacroBtoks
\def\appendtomacro#1#2{%
}
% @caption, @shortcaption are easy.
-%
+%
\long\def\caption#1{\checkenv\float \def\thiscaption{#1}}
\def\shortcaption#1{\checkenv\float \def\thisshortcaption{#1}}
% \setref calls this to get the XREFLABEL-snt value. We want an @xref
% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we
% first read the @float command.
-%
+%
\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
% Magic string used for the XREFLABEL-title value, so \xrefX can
% #1 is the control sequence we are passed; we expand into a conditional
% which is true if #1 represents a float ref. That is, the magic
% \thissection value which we \setref above.
-%
+%
\def\iffloat#1{\expandafter\doiffloat#1==\finish}
%
% #1 is (maybe) the \floatmagic string. If so, #2 will be the
% (safe) float type for this float. We set \iffloattype to #2.
-%
+%
\def\doiffloat#1=#2=#3\finish{%
\def\temp{#1}%
\def\iffloattype{#2}%
}
% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
-%
+%
\parseargdef\listoffloats{%
\def\floattype{#1}% floattype
{%
% xref label, in the form LABEL-title, which is how we save it in the
% aux file. We strip off the -title and look up \XRLABEL-lof, which
% has the text we're supposed to typeset here.
-%
+%
% Figures without xref labels will not be included in the list (since
% they won't appear in the aux file).
-%
+%
\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
\def\listoffloatsdoentry#1-title\finish{{%
% Can't fully expand XR#1-lof because it can contain anything. Just
projects / gnulib.git / blobdiff