@setfilename standards.info
@settitle GNU Coding Standards
@c This date is automagically updated when you save this file:
-@set lastupdate May 27, 2005
+@set lastupdate February 17, 2010
@c %**end of header
@dircategory GNU organization
@direntry
-* Standards: (standards). GNU coding standards.
+* Standards: (standards). GNU coding standards.
@end direntry
@c @setchapternewpage odd
@c This is used by a cross ref in make-stds.texi
@set CODESTD 1
-@iftex
-@set CHAPTER chapter
-@end iftex
-@ifinfo
-@set CHAPTER node
-@end ifinfo
@copying
The GNU coding standards, last updated @value{lastupdate}.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+Copyright @copyright{} 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1
-or any later version published by the Free Software Foundation;
-with no Invariant Sections, with no
-Front-Cover Texts, and with no Back-Cover Texts.
-A copy of the license is included in the section entitled ``GNU
-Free Documentation License''.
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
+Texts. A copy of the license is included in the section entitled
+``GNU Free Documentation License''.
@end copying
@titlepage
@end ifnottex
@menu
-* Preface:: About the GNU Coding Standards
-* Legal Issues:: Keeping Free Software Free
-* Design Advice:: General Program Design
-* Program Behavior:: Program Behavior for All Programs
-* Writing C:: Making The Best Use of C
-* Documentation:: Documenting Programs
-* Managing Releases:: The Release Process
-* References:: References to Non-Free Software or Documentation
-* Copying This Manual:: How to Make Copies of This Manual
-* Index::
+* Preface:: About the GNU Coding Standards.
+* Legal Issues:: Keeping free software free.
+* Design Advice:: General program design.
+* Program Behavior:: Program behavior for all programs
+* Writing C:: Making the best use of C.
+* Documentation:: Documenting programs.
+* Managing Releases:: The release process.
+* References:: Mentioning non-free software or documentation.
+* GNU Free Documentation License:: Copying and sharing this manual.
+* Index::
@end menu
even if you write in another programming language. The rules often
state reasons for writing in a certain way.
-This release of the GNU Coding Standards was last updated
-@value{lastupdate}.
-
@cindex where to obtain @code{standards.texi}
@cindex downloading this manual
If you did not obtain this file directly from the GNU project and
different formats, including the Texinfo source, PDF, HTML, DVI, plain
text, and more, at: @uref{http://www.gnu.org/prep/standards/}.
+If you are maintaining an official GNU package, in addition to this
+document, please read and follow the GNU maintainer information
+(@pxref{Top, , Contents, maintain, Information for Maintainers of GNU
+Software}).
+
+@cindex @code{gnustandards-commit@@gnu.org} mailing list
+If you want to receive diffs for every change to these GNU documents,
+join the mailing list @code{gnustandards-commit@@gnu.org}, via the web
+interface at
+@url{http://lists.gnu.org/mailman/listinfo/gnustandards-commit}.
+Archives are also available there.
+
Corrections or suggestions for this document should be sent to
@email{bug-standards@@gnu.org}. If you make a suggestion, please include a
suggested new wording for it; our time is limited. We prefer a context
you don't have those files, please mail your suggestion anyway.
These standards cover the minimum of what is important when writing a
-GNU package. Likely, the needs for additional standards will come up.
+GNU package. Likely, the need for additional standards will come up.
Sometimes, you might suggest that such standards be added to this
document. If you think your standards would be generally useful, please
do suggest them.
more maintainable by others.
The GNU Hello program serves as an example of how to follow the GNU
-coding standards for a trivial program which prints @samp{Hello,
-world!}. @uref{http://www.gnu.org/software/hello/hello.html}.
+coding standards for a trivial program.
+@uref{http://www.gnu.org/software/hello/hello.html}.
+
+This release of the GNU Coding Standards was last updated
+@value{lastupdate}.
+
@node Legal Issues
@chapter Keeping Free Software Free
avoids legal difficulties, and other related issues.
@menu
-* Reading Non-Free Code:: Referring to Proprietary Programs
-* Contributions:: Accepting Contributions
-* Trademarks:: How We Deal with Trademark Issues
+* Reading Non-Free Code:: Referring to proprietary programs.
+* Contributions:: Accepting contributions.
+* Trademarks:: How we deal with trademark issues.
@end menu
@node Reading Non-Free Code
For example, Unix utilities were generally optimized to minimize
memory use; if you go for speed instead, your program will be very
-different. You could keep the entire input file in core and scan it
+different. You could keep the entire input file in memory and scan it
there instead of using stdio. Use a smarter algorithm discovered more
recently than the Unix program. Eliminate use of temporary files. Do
it in one pass instead of two (we did this in the assembler).
Trademark acknowledgements are the statements that such-and-such is a
trademark of so-and-so. The GNU Project has no objection to the basic
-idea of trademarks, but these acknowledgements feel like kowtowing,
+idea of trademarks, but these acknowledgements feel like kowtowing,
and there is no legal requirement for them, so we don't use them.
What is legally required, as regards other people's trademarks, is to
@menu
* Source Language:: Which languages to use.
-* Compatibility:: Compatibility with other implementations
-* Using Extensions:: Using non-standard features
-* Standard C:: Using Standard C features
-* Conditional Compilation:: Compiling Code Only If A Conditional is True
+* Compatibility:: Compatibility with other implementations.
+* Using Extensions:: Using non-standard features.
+* Standard C:: Using standard C features.
+* Conditional Compilation:: Compiling code only if a conditional is true.
@end menu
@node Source Language
is written in that language, too. The Emacs editor pioneered this
technique.
-@cindex GUILE
-The standard extensibility interpreter for GNU software is GUILE, which
-implements the language Scheme (an especially clean and simple dialect
-of Lisp). @uref{http://www.gnu.org/software/guile/}. We don't reject
-programs written in other ``scripting languages'' such as Perl and
-Python, but using GUILE is very important for the overall consistency of
-the GNU system.
+@cindex Guile
+@cindex GNOME and Guile
+The standard extensibility interpreter for GNU software is Guile
+(@uref{http://www.gnu.org/@/software/@/guile/}), which implements the
+language Scheme (an especially clean and simple dialect of Lisp).
+Guile also includes bindings for GTK+/GNOME, making it practical to
+write modern GUI functionality within Guile. We don't reject programs
+written in other ``scripting languages'' such as Perl and Python, but
+using Guile is very important for the overall consistency of the GNU
+system.
+
@node Compatibility
@section Compatibility with Other Implementations
GCC developers many hours, or even days, per year.
In the case of function-like macros like @code{REVERSIBLE_CC_MODE} in
-GCC which cannot be simply used in @code{if( ...)} statements, there is
+GCC which cannot be simply used in @code{if (...)} statements, there is
an easy workaround. Simply introduce another macro
@code{HAS_REVERSIBLE_CC_MODE} as in the following example:
command line interface, and how libraries should behave.
@menu
-* Semantics:: Writing robust programs
-* Libraries:: Library behavior
-* Errors:: Formatting error messages
-* User Interfaces:: Standards about interfaces generally
-* Graphical Interfaces:: Standards for graphical interfaces
-* Command-Line Interfaces:: Standards for command line interfaces
-* Option Table:: Table of long options
-* Memory Usage:: When and how to care about memory needs
-* File Usage:: Which files to use, and where
+* Non-GNU Standards:: We consider standards such as POSIX;
+ we don't "obey" them.
+* Semantics:: Writing robust programs.
+* Libraries:: Library behavior.
+* Errors:: Formatting error messages.
+* User Interfaces:: Standards about interfaces generally.
+* Graphical Interfaces:: Standards for graphical interfaces.
+* Command-Line Interfaces:: Standards for command line interfaces.
+* Option Table:: Table of long options.
+* OID Allocations:: Table of OID slots for GNU.
+* Memory Usage:: When and how to care about memory needs.
+* File Usage:: Which files to use, and where.
@end menu
+@node Non-GNU Standards
+@section Non-GNU Standards
+
+The GNU Project regards standards published by other organizations as
+suggestions, not orders. We consider those standards, but we do not
+``obey'' them. In developing a GNU program, you should implement
+an outside standard's specifications when that makes the GNU system
+better overall in an objective sense. When it doesn't, you shouldn't.
+
+In most cases, following published standards is convenient for
+users---it means that their programs or scripts will work more
+portably. For instance, GCC implements nearly all the features of
+Standard C as specified by that standard. C program developers would
+be unhappy if it did not. And GNU utilities mostly follow
+specifications of POSIX.2; shell script writers and users would be
+unhappy if our programs were incompatible.
+
+But we do not follow either of these specifications rigidly, and there
+are specific points on which we decided not to follow them, so as to
+make the GNU system better for users.
+
+For instance, Standard C says that nearly all extensions to C are
+prohibited. How silly! GCC implements many extensions, some of which
+were later adopted as part of the standard. If you want these
+constructs to give an error message as ``required'' by the standard,
+you must specify @samp{--pedantic}, which was implemented only so that
+we can say ``GCC is a 100% implementation of the standard,'' not
+because there is any reason to actually use it.
+
+POSIX.2 specifies that @samp{df} and @samp{du} must output sizes by
+default in units of 512 bytes. What users want is units of 1k, so
+that is what we do by default. If you want the ridiculous behavior
+``required'' by POSIX, you must set the environment variable
+@samp{POSIXLY_CORRECT} (which was originally going to be named
+@samp{POSIX_ME_HARDER}).
+
+GNU utilities also depart from the letter of the POSIX.2 specification
+when they support long-named command-line options, and intermixing
+options with ordinary arguments. This minor incompatibility with
+POSIX is never a problem in practice, and it is very useful.
+
+In particular, don't reject a new feature, or remove an old one,
+merely because a standard says it is ``forbidden'' or ``deprecated.''
+
@node Semantics
@section Writing Robust Programs
avoid this problem by creating temporary files in this manner:
@example
-fd = open(filename, O_WRONLY | O_CREAT | O_EXCL, 0600);
+fd = open (filename, O_WRONLY | O_CREAT | O_EXCL, 0600);
@end example
@noindent
@example
@var{source-file-name}:@var{lineno}:@var{column}: @var{message}
-@var{source-file-name}:@var{lineno}.@var{column}: @var{message}
+@var{source-file-name}:@var{lineno}.@var{column}: @var{message}
@end example
like @code{ls} except that its default output format is always
multi-column format.
+
@node Graphical Interfaces
@section Standards for Graphical Interfaces
@cindex graphical user interface
doing the work to provide the functionality and the graphical interface,
these won't be much extra work.
+
@node Command-Line Interfaces
@section Standards for Command Line Interfaces
@cindex command-line interface
(preferably @samp{-o} or @samp{--output}). Even if you allow an output
file name as an ordinary argument for compatibility, try to provide an
option as another way to specify it. This will lead to more consistency
-among GNU utilities, and fewer idiosyncracies for users to remember.
+among GNU utilities, and fewer idiosyncrasies for users to remember.
@cindex standard command-line options
@cindex options, standard command-line
output the same information as invoking @samp{p.cgi --help} from the
command line.
-@table @code
-@cindex @samp{--version} option
-@item --version
-This option should direct the program to print information about its name,
-version, origin and legal status, all on standard output, and then exit
-successfully. Other options and arguments should be ignored once this
-is seen, and the program should not perform its normal function.
+@menu
+* --version:: The standard output for --version.
+* --help:: The standard output for --help.
+@end menu
+
+@node --version
+@subsection @option{--version}
+
+@cindex @samp{--version} output
+
+The standard @code{--version} option should direct the program to
+print information about its name, version, origin and legal status,
+all on standard output, and then exit successfully. Other options and
+arguments should be ignored once this is seen, and the program should
+not perform its normal function.
@cindex canonical name of a program
@cindex program's canonical name
program's version number, you can mention the package version number
just before the close-parenthesis.
-If you @strong{need} to mention the version numbers of libraries which
+If you @emph{need} to mention the version numbers of libraries which
are distributed separately from the package which contains this program,
you can do so by printing an additional line of version info for each
library you want to mention. Use the same format for these lines as for
copyright notice. If more than one copyright notice is called for, put
each on a separate line.
-Next should follow a brief statement that the program is free software,
-and that users are free to copy and change it on certain conditions. If
-the program is covered by the GNU GPL, say so here. Also mention that
-there is no warranty, to the extent permitted by law.
+Next should follow a line stating the license, preferably using one of
+abbrevations below, and a brief statement that the program is free
+software, and that users are free to copy and change it. Also mention
+that there is no warranty, to the extent permitted by law. See
+recommended wording below.
It is ok to finish the output with a list of the major authors of the
program, as a way of giving credit.
Here's an example of output that follows these rules:
@smallexample
-GNU Emacs 19.34.5
-Copyright (C) 1996 Free Software Foundation, Inc.
-GNU Emacs comes with NO WARRANTY,
-to the extent permitted by law.
-You may redistribute copies of GNU Emacs
-under the terms of the GNU General Public License.
-For more information about these matters,
-see the files named COPYING.
+GNU hello 2.3
+Copyright (C) 2007 Free Software Foundation, Inc.
+License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law.
@end smallexample
You should adapt this to your program, of course, filling in the proper
which changes were made---there's no need to list the years for previous
versions' changes. You don't have to mention the name of the program in
these notices, if that is inconvenient, since it appeared in the first
-line.
+line. (The rules are different for copyright notices in source files;
+@pxref{Copyright Notices,,,maintain,Information for GNU Maintainers}.)
Translations of the above lines must preserve the validity of the
copyright notices (@pxref{Internationalization}). If the translation's
character set supports it, the @samp{(C)} should be replaced with the
copyright symbol, as follows:
-@ifinfo
-(the official copyright symbol, which is the letter C in a circle);
-@end ifinfo
-@ifnotinfo
+@ifinfo
+(the official copyright symbol, which is the letter C in a circle);
+@end ifinfo
+@ifnotinfo
@copyright{}
-@end ifnotinfo
+@end ifnotinfo
Write the word ``Copyright'' exactly like that, in English. Do not
translate it into another language. International treaties recognize
the English word ``Copyright''; translations into other languages do not
have legal significance.
+Finally, here is the table of our suggested license abbreviations.
+Any abbreviation can be followed by @samp{v@var{version}[+]}, meaning
+that particular version, or later versions with the @samp{+}, as shown
+above.
-@cindex @samp{--help} option
-@item --help
-This option should output brief documentation for how to invoke the
-program, on standard output, then exit successfully. Other options and
-arguments should be ignored once this is seen, and the program should
-not perform its normal function.
+In the case of exceptions for extra permissions with the GPL, we use
+@samp{/} for a separator; the version number can follow the license
+abbreviation as usual, as in the examples below.
+
+@table @asis
+@item GPL
+GNU General Public License, @url{http://www.gnu.org/@/licenses/@/gpl.html}.
+
+@item LGPL
+GNU Lesser General Public License, @url{http://www.gnu.org/@/licenses/@/lgpl.html}.
+
+@item GPL/Guile
+GNU GPL with the exception for Guile; for example, GPLv3+/Guile means
+the GNU GPL version 3 or later, with the extra exception for Guile.
+
+@item GPL/Ada
+GNU GPL with the exception for Ada.
+
+@item Apache
+The Apache Software Foundation license,
+@url{http://www.apache.org/@/licenses}.
+
+@item Artistic
+The Artistic license used for Perl, @url{http://www.perlfoundation.org/@/legal}.
+
+@item Expat
+The Expat license, @url{http://www.jclark.com/@/xml/@/copying.txt}.
+
+@item MPL
+The Mozilla Public License, @url{http://www.mozilla.org/@/MPL/}.
+
+@item OBSD
+The original (4-clause) BSD license, incompatible with the GNU GPL
+@url{http://www.xfree86.org/@/3.3.6/@/COPYRIGHT2.html#6}.
+
+@item PHP
+The license used for PHP, @url{http://www.php.net/@/license/}.
+
+@item public domain
+The non-license that is being in the public domain,
+@url{http://www.gnu.org/@/licenses/@/license-list.html#PublicDomain}.
+
+@item Python
+The license for Python, @url{http://www.python.org/@/2.0.1/@/license.html}.
+
+@item RBSD
+The revised (3-clause) BSD, compatible with the GNU GPL,
+@url{http://www.xfree86.org/@/3.3.6/@/COPYRIGHT2.html#5}.
+
+@item X11
+The simple non-copyleft license used for most versions of the X Window
+system, @url{http://www.xfree86.org/@/3.3.6/@/COPYRIGHT2.html#3}.
+
+@item Zlib
+The license for Zlib, @url{http://www.gzip.org/@/zlib/@/zlib_license.html}.
+
+@end table
+
+More information about these licenses and many more are on the GNU
+licensing web pages,
+@url{http://www.gnu.org/@/licenses/@/license-list.html}.
+
+
+@node --help
+@subsection @option{--help}
+
+@cindex @samp{--help} output
+
+The standard @code{--help} option should output brief documentation
+for how to invoke the program, on standard output, then exit
+successfully. Other options and arguments should be ignored once this
+is seen, and the program should not perform its normal function.
@cindex address for bug reports
@cindex bug reports
-Near the end of the @samp{--help} option's output there should be a line
-that says where to mail bug reports. It should have this format:
+Near the end of the @samp{--help} option's output, please place lines
+giving the email address for bug reports, the package's home page
+(normally @indicateurl{http://www.gnu.org/software/@var{pkg}}, and the
+general page for help using GNU programs. The format should be like this:
@example
-Report bugs to @var{mailing-address}.
+Report bugs to: @var{mailing-address}
+@var{pkg} home page: <http://www.gnu.org/software/@var{pkg}/>
+General help using GNU software: <http://www.gnu.org/gethelp/>
@end example
-@end table
+
+It is ok to mention other appropriate mailing lists and web pages.
+
@node Option Table
@section Table of Long Options
@samp{-v} in @code{gawk}.
@item assume-new
-@samp{-W} in Make.
+@samp{-W} in @code{make}.
@item assume-old
-@samp{-o} in Make.
+@samp{-o} in @code{make}.
@item auto-check
@samp{-a} in @code{recode}.
@samp{-d} in @code{touch}.
@item debug
-@samp{-d} in Make and @code{m4};
+@samp{-d} in @code{make} and @code{m4};
@samp{-t} in Bison.
@item define
@samp{-X} in @code{strip}.
@item dry-run
-@samp{-n} in Make.
+@samp{-n} in @code{make}.
@item ed
@samp{-e} in @code{diff}.
@samp{-N} in @code{diff}.
@item environment-overrides
-@samp{-e} in Make.
+@samp{-e} in @code{make}.
@item eof
@samp{-e} in @code{xargs}.
@samp{-E} in @code{m4}.
@item file
-@samp{-f} in @code{info}, @code{gawk}, Make, @code{mt}, and @code{tar};
-@samp{-n} in @code{sed};
-@samp{-r} in @code{touch}.
+@samp{-f} in @code{gawk}, @code{info}, @code{make}, @code{mt},
+@code{sed}, and @code{tar}.
@item field-separator
@samp{-F} in @code{gawk}.
@samp{-i} in @code{diff} and @code{wdiff}.
@item ignore-errors
-@samp{-i} in Make.
+@samp{-i} in @code{make}.
@item ignore-file
@samp{-i} in @code{ptx}.
@samp{-I} in @code{m4}.
@item include-dir
-@samp{-I} in Make.
+@samp{-I} in @code{make}.
@item incremental
@samp{-G} in @code{tar}.
Used in @code{date}
@item jobs
-@samp{-j} in Make.
+@samp{-j} in @code{make}.
@item just-print
-@samp{-n} in Make.
+@samp{-n} in @code{make}.
@item keep-going
-@samp{-k} in Make.
+@samp{-k} in @code{make}.
@item keep-files
@samp{-k} in @code{csplit}.
@samp{-N} in @code{ls}.
@item load-average
-@samp{-l} in Make.
+@samp{-l} in @code{make}.
@item login
Used in @code{su}.
@samp{-d} in @code{cpio}.
@item makefile
-@samp{-f} in Make.
+@samp{-f} in @code{make}.
@item mapped
Used in GDB.
@samp{-l} in @code{xargs}.
@item max-load
-@samp{-l} in Make.
+@samp{-l} in @code{make}.
@item max-procs
@samp{-P} in @code{xargs}.
@samp{-a} in @code{shar}.
@item new-file
-@samp{-W} in Make.
+@samp{-W} in @code{make}.
@item no-builtin-rules
-@samp{-r} in Make.
+@samp{-r} in @code{make}.
@item no-character-count
@samp{-w} in @code{shar}.
@samp{-2} in @code{wdiff}.
@item no-keep-going
-@samp{-S} in Make.
+@samp{-S} in @code{make}.
@item no-lines
@samp{-l} in Bison.
@samp{-o} in @code{tar}.
@item old-file
-@samp{-o} in Make.
+@samp{-o} in @code{make}.
@item one-file-system
@samp{-l} in @code{tar}, @code{cp}, and @code{du}.
@samp{-L} in @code{cmp}.
@item print-data-base
-@samp{-p} in Make.
+@samp{-p} in @code{make}.
@item print-directory
-@samp{-w} in Make.
+@samp{-w} in @code{make}.
@item print-file-name
@samp{-o} in @code{nm}.
@samp{-X} in @code{shar}.
@item question
-@samp{-q} in Make.
+@samp{-q} in @code{make}.
@item quiet
Used in many programs to inhibit the usual output. Every
Used in GDB.
@item recon
-@samp{-n} in Make.
+@samp{-n} in @code{make}.
@item record-number
@samp{-R} in @code{tar}.
Used in @code{chgrp}, @code{chown}, @code{cp}, @code{ls}, @code{diff},
and @code{rm}.
-@item reference-limit
-Used in @code{makeinfo}.
+@item reference
+@samp{-r} in @code{touch}.
@item references
@samp{-r} in @code{ptx}.
@item socket
Specify a file descriptor for a network server to use for its socket,
instead of opening and binding a new socket. This provides a way to
-run, in a nonpriveledged process, a server that normally needs a
+run, in a non-privileged process, a server that normally needs a
reserved port number.
@item sort
@samp{-S} in @code{shar}.
@item stop
-@samp{-S} in Make.
+@samp{-S} in @code{make}.
@item strict
@samp{-s} in @code{recode}.
@samp{-c} in @code{du}.
@item touch
-@samp{-t} in Make, @code{ranlib}, and @code{recode}.
+@samp{-t} in @code{make}, @code{ranlib}, and @code{recode}.
@item trace
@samp{-t} in @code{m4}.
@samp{-V} in @code{tar}.
@item what-if
-@samp{-W} in Make.
+@samp{-W} in @code{make}.
@item whole-size-limit
@samp{-l} in @code{shar}.
@samp{-z} in @code{gprof}.
@end table
+@node OID Allocations
+@section OID Allocations
+@cindex OID allocations for GNU
+@cindex SNMP
+@cindex LDAP
+@cindex X.509
+
+The OID (object identifier) 1.3.6.1.4.1.11591 has been assigned to the
+GNU Project (thanks to Werner Koch). These are used for SNMP, LDAP,
+X.509 certificates, and so on. The web site
+@url{http://www.alvestrand.no/objectid} has a (voluntary) listing of
+many OID assignments.
+
+If you need a new slot for your GNU package, write
+@email{maintainers@@gnu.org}. Here is a list of arcs currently
+assigned:
+
+@example
+@include gnu-oids.texi
+@end example
+
+
@node Memory Usage
@section Memory Usage
@cindex memory usage
If a program typically uses just a few meg of memory, don't bother making any
effort to reduce memory usage. For example, if it is impractical for
other reasons to operate on files more than a few meg long, it is
-reasonable to read entire input files into core to operate on them.
+reasonable to read entire input files into memory to operate on them.
However, for programs such as @code{cat} or @code{tail}, that can
usefully operate on very large files, it is important to avoid using a
If a program works by lines and could be applied to arbitrary
user-supplied input files, it should keep only a line in memory, because
this is not very hard and users will want to be able to operate on input
-files that are bigger than will fit in core all at once.
+files that are bigger than will fit in memory all at once.
If your program creates complicated data structures, just make them in
-core and give a fatal error if @code{malloc} returns zero.
+memory and give a fatal error if @code{malloc} returns zero.
@node File Usage
@section File Usage
when writing GNU software.
@menu
-* Formatting:: Formatting Your Source Code
-* Comments:: Commenting Your Work
-* Syntactic Conventions:: Clean Use of C Constructs
-* Names:: Naming Variables, Functions, and Files
-* System Portability:: Portability between different operating systems
-* CPU Portability:: Supporting the range of CPU types
-* System Functions:: Portability and ``standard'' library functions
-* Internationalization:: Techniques for internationalization
+* Formatting:: Formatting your source code.
+* Comments:: Commenting your work.
+* Syntactic Conventions:: Clean use of C constructs.
+* Names:: Naming variables, functions, and files.
+* System Portability:: Portability among different operating systems.
+* CPU Portability:: Supporting the range of CPU types.
+* System Functions:: Portability and ``standard'' library functions.
+* Internationalization:: Techniques for internationalization.
+* Character Set:: Use ASCII by default.
+* Quote Characters:: Use `...' in the C locale.
* Mmap:: How you can safely use @code{mmap}.
@end menu
@cindex open brace
@cindex braces, in C source
It is important to put the open-brace that starts the body of a C
-function in column zero, and avoid putting any other open-brace or
-open-parenthesis or open-bracket in column zero. Several tools look
-for open-braces in column zero to find the beginnings of C functions.
-These tools will not work on code not formatted that way.
+function in column one, so that they will start a defun. Several
+tools look for open-braces in column one to find the beginnings of C
+functions. These tools will not work on code not formatted that way.
+
+Avoid putting open-brace, open-parenthesis or open-bracket in column
+one when they are inside a function, so that they won't start a defun.
+The open-brace that starts a @code{struct} body can go in column one
+if you find it useful to treat that definition as a defun.
It is also important for function definitions to start the name of the
-function in column zero. This helps people to search for function
+function in column one. This helps people to search for function
definitions, and may also help certain tools recognize them. Thus,
using Standard C syntax, the format is this:
@end example
@noindent
-or, if you want to use Standard C syntax, format the definition like
+or, if you want to use traditional C syntax, format the definition like
this:
@example
static char *
-concat (s1, s2) /* Name starts in column zero here */
+concat (s1, s2) /* Name starts in column one here */
char *s1, *s2;
-@{ /* Open brace in column zero here */
+@{ /* Open brace in column one here */
@dots{}
@}
@end example
@cindex commenting
Every program should start with a comment saying briefly what it is for.
-Example: @samp{fmt - filter for simple filling of text}.
+Example: @samp{fmt - filter for simple filling of text}. This comment
+should be at the top of the source file containing the @samp{main}
+function of the program.
+
+Also, please write a brief comment at the start of each source file,
+with the file name and a line or two about the overall purpose of the
+file.
Please write the comments in a GNU program in English, because English
is the one language that nearly all programmers in all countries can
same declaration. Instead, declare the structure tag separately
and then use it to declare the variables or typedefs.
-Try to avoid assignments inside @code{if}-conditions. For example,
-don't write this:
+Try to avoid assignments inside @code{if}-conditions (assignments
+inside @code{while}-conditions are ok). For example, don't write
+this:
@example
if ((foo = (char *) malloc (sizeof *foo)) == 0)
@cindex file-name limitations
@pindex doschk
You might want to make sure that none of the file names would conflict
-the files were loaded onto an MS-DOS file system which shortens the
+if the files were loaded onto an MS-DOS file system which shortens the
names. You can use the program @code{doschk} to test for this.
Some GNU programs were designed to limit themselves to file names of 14
when there is a higher-level alternative (@code{readdir}).
@cindex non-@sc{posix} systems, and portability
-As for systems that are not like Unix, such as MSDOS, Windows, the
-Macintosh, VMS, and MVS, supporting them is often a lot of work. When
-that is the case, it is better to spend your time adding features that
-will be useful on GNU and GNU/Linux, rather than on supporting other
-incompatible systems.
+As for systems that are not like Unix, such as MSDOS, Windows, VMS, MVS,
+and older Macintosh systems, supporting them is often a lot of work.
+When that is the case, it is better to spend your time adding features
+that will be useful on GNU and GNU/Linux, rather than on supporting
+other incompatible systems.
If you do support Windows, please do not abbreviate it as ``win''. In
hacker terminology, calling something a ``win'' is a form of praise.
You're free to praise Microsoft Windows on your own if you want, but
please don't do this in GNU packages. Instead of abbreviating
-``Windows'' to ``un'', you can write it in full or abbreviate it to
+``Windows'' to ``win'', you can write it in full or abbreviate it to
``woe'' or ``w''. In GNU Emacs, for instance, we use @samp{w32} in
file names of Windows-specific files, but the macro for Windows
conditionals is called @code{WINDOWSNT}.
@end example
1989 Standard C requires this to work, and we know of only one
-counterexample: 64-bit programs on Microsoft Windows IA-64. We will
+counterexample: 64-bit programs on Microsoft Windows. We will
leave it to those who want to port GNU programs to that environment
to figure out how to do it.
@example
int c;
@dots{}
-while ((c = getchar()) != EOF)
- write(file_descriptor, &c, 1);
+while ((c = getchar ()) != EOF)
+ write (file_descriptor, &c, 1);
+@end example
+
+@noindent Instead, use @code{unsigned char} as follows. (The @code{unsigned}
+is for portability to unusual systems where @code{char} is signed and
+where there is integer overflow checking.)
+
+@example
+int c;
+while ((c = getchar ()) != EOF)
+ @{
+ unsigned char u = c;
+ write (file_descriptor, &u, 1);
+ @}
@end example
It used to be ok to not worry about the difference between pointers
A simple way to use the Gnulib error module is to obtain the two
source files @file{error.c} and @file{error.h} from the Gnulib library
source code repository at
-@uref{http://savannah.gnu.org/cgi-bin/viewcvs/gnulib/gnulib/lib/}.
+@uref{http://git.savannah.gnu.org/@/gitweb/@/?p=gnulib.git}.
Here's a sample use:
@example
name} for the package. The text domain name is used to separate the
translations for this package from the translations for other packages.
Normally, the text domain name should be the same as the name of the
-package---for example, @samp{fileutils} for the GNU file utilities.
+package---for example, @samp{coreutils} for the GNU core utilities.
@cindex message text, and internationalization
To enable gettext to work well, avoid writing code that makes
Here is an example of what not to do:
+@smallexample
+printf ("%s is full", capacity > 5000000 ? "disk" : "floppy disk");
+@end smallexample
+
+If you apply gettext to all strings, like this,
+
+@smallexample
+printf (gettext ("%s is full"),
+ capacity > 5000000 ? gettext ("disk") : gettext ("floppy disk"));
+@end smallexample
+
+@noindent
+the translator will hardly know that "disk" and "floppy disk" are meant to
+be substituted in the other string. Worse, in some languages (like French)
+the construction will not work: the translation of the word "full" depends
+on the gender of the first part of the sentence; it happens to be not the
+same for "disk" as for "floppy disk".
+
+Complete sentences can be translated without problems:
+
+@example
+printf (capacity > 5000000 ? gettext ("disk is full")
+ : gettext ("floppy disk is full"));
+@end example
+
+A similar problem appears at the level of sentence structure with this
+code:
+
+@example
+printf ("# Implicit rule search has%s been done.\n",
+ f->tried_implicit ? "" : " not");
+@end example
+
+@noindent
+Adding @code{gettext} calls to this code cannot give correct results for
+all languages, because negation in some languages requires adding words
+at more than one place in the sentence. By contrast, adding
+@code{gettext} calls does the job straightforwardly if the code starts
+out like this:
+
+@example
+printf (f->tried_implicit
+ ? "# Implicit rule search has been done.\n",
+ : "# Implicit rule search has not been done.\n");
+@end example
+
+Another example is this one:
+
@example
printf ("%d file%s processed", nfiles,
nfiles != 1 ? "s" : "");
@end example
@noindent
-The problem with that example is that it assumes that plurals are made
+The problem with this example is that it assumes that plurals are made
by adding `s'. If you apply gettext to the format string, like this,
@example
@noindent
the message can use different words, but it will still be forced to use
-`s' for the plural. Here is a better way:
+`s' for the plural. Here is a better way, with gettext being applied to
+the two strings independently:
@example
-printf ((nfiles != 1 ? "%d files processed"
- : "%d file processed"),
+printf ((nfiles != 1 ? gettext ("%d files processed")
+ : gettext ("%d file processed")),
nfiles);
@end example
@noindent
-This way, you can apply gettext to each of the two strings
-independently:
+But this still doesn't work for languages like Polish, which has three
+plural forms: one for nfiles == 1, one for nfiles == 2, 3, 4, 22, 23, 24, ...
+and one for the rest. The GNU @code{ngettext} function solves this problem:
@example
-printf ((nfiles != 1 ? gettext ("%d files processed")
- : gettext ("%d file processed")),
+printf (ngettext ("%d files processed", "%d file processed", nfiles),
nfiles);
@end example
-@noindent
-This can be any method of forming the plural of the word for ``file'', and
-also handles languages that require agreement in the word for
-``processed''.
-A similar problem appears at the level of sentence structure with this
-code:
+@node Character Set
+@section Character Set
+@cindex character set
+@cindex encodings
+@cindex ASCII characters
+@cindex non-ASCII characters
-@example
-printf ("# Implicit rule search has%s been done.\n",
- f->tried_implicit ? "" : " not");
-@end example
+Sticking to the ASCII character set (plain text, 7-bit characters) is
+preferred in GNU source code comments, text documents, and other
+contexts, unless there is good reason to do something else because of
+the application domain. For example, if source code deals with the
+French Revolutionary calendar, it is OK if its literal strings contain
+accented characters in month names like ``Flor@'eal''. Also, it is OK
+to use non-ASCII characters to represent proper names of contributors in
+change logs (@pxref{Change Logs}).
-@noindent
-Adding @code{gettext} calls to this code cannot give correct results for
-all languages, because negation in some languages requires adding words
-at more than one place in the sentence. By contrast, adding
-@code{gettext} calls does the job straightfowardly if the code starts
-out like this:
+If you need to use non-ASCII characters, you should normally stick with
+one encoding, as one cannot in general mix encodings reliably.
+
+
+@node Quote Characters
+@section Quote Characters
+@cindex quote characters
+@cindex locale-specific quote characters
+@cindex left quote
+@cindex grave accent
+
+In the C locale, GNU programs should stick to plain ASCII for quotation
+characters in messages to users: preferably 0x60 (@samp{`}) for left
+quotes and 0x27 (@samp{'}) for right quotes. It is ok, but not
+required, to use locale-specific quotes in other locales.
+
+The @uref{http://www.gnu.org/software/gnulib/, Gnulib} @code{quote} and
+@code{quotearg} modules provide a reasonably straightforward way to
+support locale-specific quote characters, as well as taking care of
+other issues, such as quoting a filename that itself contains a quote
+character. See the Gnulib documentation for usage details.
+
+In any case, the documentation for your program should clearly specify
+how it does quoting, if different than the preferred method of @samp{`}
+and @samp{'}. This is especially important if the output of your
+program is ever likely to be parsed by another program.
+
+Quotation characters are a difficult area in the computing world at
+this time: there are no true left or right quote characters in Latin1;
+the @samp{`} character we use was standardized there as a grave
+accent. Moreover, Latin1 is still not universally usable.
+
+Unicode contains the unambiguous quote characters required, and its
+common encoding UTF-8 is upward compatible with Latin1. However,
+Unicode and UTF-8 are not universally well-supported, either.
+
+This may change over the next few years, and then we will revisit
+this.
-@example
-printf (f->tried_implicit
- ? "# Implicit rule search has been done.\n",
- : "# Implicit rule search has not been done.\n");
-@end example
@node Mmap
@section Mmap
* Manual Credits:: Giving credit to documentation contributors.
* Printed Manuals:: Mentioning the printed manual.
* NEWS File:: NEWS files supplement manuals.
-* Change Logs:: Recording Changes
+* Change Logs:: Recording changes.
* Man Pages:: Man pages are secondary.
* Reading other Manuals:: How far you can go in learning
from other manuals.
converted automatically into Texinfo. It is ok to produce the Texinfo
documentation by conversion this way, as long as it gives good results.
-Programmers often find it most natural to structure the documentation
-following the structure of the implementation, which they know. But
-this structure is not necessarily good for explaining how to use the
-program; it may be irrelevant and confusing for a user.
-
-At every level, from the sentences in a paragraph to the grouping of
-topics into separate manuals, the right way to structure documentation
-is according to the concepts and questions that a user will have in mind
-when reading it. Sometimes this structure of ideas matches the
+Make sure your manual is clear to a reader who knows nothing about the
+topic and reads it straight through. This means covering basic topics
+at the beginning, and advanced topics only later. This also means
+defining every specialized term when it is first used.
+
+Programmers tend to carry over the structure of the program as the
+structure for its documentation. But this structure is not
+necessarily good for explaining how to use the program; it may be
+irrelevant and confusing for a user.
+
+Instead, the right way to structure documentation is according to the
+concepts and questions that a user will have in mind when reading it.
+This principle applies at every level, from the lowest (ordering
+sentences in a paragraph) to the highest (ordering of chapter topics
+within the manual). Sometimes this structure of ideas matches the
structure of the implementation of the software being documented---but
-often they are different. Often the most important part of learning to
-write good documentation is learning to notice when you are structuring
-the documentation like the implementation, and think about better
-alternatives.
+often they are different. An important part of learning to write good
+documentation is to learn to notice when you have unthinkingly
+structured the documentation like the implementation, stop yourself,
+and look for better alternatives.
For example, each program in the GNU system probably ought to be
documented in one manual; but this does not mean each program should
a computer program. Please use ``invalid'' for this, and reserve the
term ``illegal'' for activities prohibited by law.
+Please do not write @samp{()} after a function name just to indicate
+it is a function. @code{foo ()} is not a function, it is a function
+call with no arguments.
+
@node Doc Strings and Manuals
@section Doc Strings and Manuals
variables. The previous descriptions of functions and variables in the
section will also have given information about the topic. A description
written to stand alone would repeat some of that information; this
-redundance looks bad. Meanwhile, the informality that is acceptable in
+redundancy looks bad. Meanwhile, the informality that is acceptable in
a documentation string is totally unacceptable in a manual.
The only good way to use documentation strings in writing a good manual
history of how the conflicting concepts arose and who they came from.
@menu
-* Change Log Concepts::
-* Style of Change Logs::
-* Simple Changes::
-* Conditional Changes::
+* Change Log Concepts::
+* Style of Change Logs::
+* Simple Changes::
+* Conditional Changes::
* Indicating the Part Changed::
@end menu
The change log file is normally called @file{ChangeLog} and covers an
entire directory. Each directory can have its own change log, or a
-directory can use the change log of its parent directory--it's up to
+directory can use the change log of its parent directory---it's up to
you.
Another alternative is to record change log information with a version
to a @file{ChangeLog} file using @code{rcs2log}; in Emacs, the command
@kbd{C-x v a} (@code{vc-update-change-log}) does the job.
-There's no need to describe the full purpose of the changes or how they
-work together. If you think that a change calls for explanation, you're
-probably right. Please do explain it---but please put the explanation
-in comments in the code, where people will see it whenever they see the
-code. For example, ``New function'' is enough for the change log when
-you add a function, because there should be a comment before the
-function definition to explain what it does.
+There's no need to describe the full purpose of the changes or how
+they work together. However, sometimes it is useful to write one line
+to describe the overall purpose of a change or a batch of changes. If
+you think that a change calls for explanation, you're probably right.
+Please do explain it---but please put the full explanation in comments
+in the code, where people will see it whenever they see the code. For
+example, ``New function'' is enough for the change log when you add a
+function, because there should be a comment before the function
+definition to explain what it does.
In the past, we recommended not mentioning changes in non-software
files (manuals, help files, etc.) in change logs. However, we've been
advised that it is a good idea to include them, for the sake of
copyright records.
-However, sometimes it is useful to write one line to describe the
-overall purpose of a batch of changes.
-
The easiest way to add an entry to @file{ChangeLog} is with the Emacs
command @kbd{M-x add-change-log-entry}. An entry should have an
asterisk, the name of the changed file, and then in parentheses the name
is more authoritative. The note should say how to access the Texinfo
documentation.
-Be sure that man pages include a copyright statement and free
-license. The simple all-permissive license is appropriate for simple
-man pages:
-
-@example
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.
-@end example
+Be sure that man pages include a copyright statement and free license.
+The simple all-permissive license is appropriate for simple man pages
+(@pxref{License Notices for Other Files,,,maintain,Information for GNU
+Maintainers}).
For long man pages, with enough explanation and documentation that
they can be considered true manuals, use the GFDL (@pxref{License for
all GNU software.
@menu
-* Configuration:: How Configuration Should Work
-* Makefile Conventions:: Makefile Conventions
-* Releases:: Making Releases
+* Configuration:: How configuration of GNU packages should work.
+* Makefile Conventions:: Makefile conventions.
+* Releases:: Making releases
@end menu
@node Configuration
Each GNU distribution should come with a shell script named
@code{configure}. This script is given arguments which describe the
kind of machine and system you want to compile the program for.
-
The @code{configure} script must record the configuration options so
that they affect compilation.
-One way to do this is to make a link from a standard name such as
-@file{config.h} to the proper configuration file for the chosen system.
-If you use this technique, the distribution should @emph{not} contain a
-file named @file{config.h}. This is so that people won't be able to
-build the program without configuring it first.
+The description here is the specification of the interface for the
+@code{configure} script in GNU packages. Many packages implement it
+using GNU Autoconf (@pxref{Top,, Introduction, autoconf, Autoconf})
+and/or GNU Automake (@pxref{Top,, Introduction, automake, Automake}),
+but you do not have to use these tools. You can implement it any way
+you like; for instance, by making @code{configure} be a wrapper around
+a completely different configuration system.
+
+Another way for the @code{configure} script to operate is to make a
+link from a standard name such as @file{config.h} to the proper
+configuration file for the chosen system. If you use this technique,
+the distribution should @emph{not} contain a file named
+@file{config.h}. This is so that people won't be able to build the
+program without configuring it first.
Another thing that @code{configure} can do is to edit the Makefile. If
you do this, the distribution should @emph{not} contain a file named
possible, @code{configure} can add to the Makefile a variable named
@code{srcdir} whose value is precisely the specified directory.
+In addition, the @samp{configure} script should take options
+corresponding to most of the standard directory variables
+(@pxref{Directory Variables}). Here is the list:
+
+@example
+--prefix --exec-prefix --bindir --sbindir --libexecdir --sysconfdir
+--sharedstatedir --localstatedir --libdir --includedir --oldincludedir
+--datarootdir --datadir --infodir --localedir --mandir --docdir
+--htmldir --dvidir --pdfdir --psdir
+@end example
+
The @code{configure} script should also take an argument which specifies the
type of system to build the program for. This argument should look like
this:
The @code{configure} script needs to be able to decode all plausible
alternatives for how to describe a machine. Thus,
-@samp{athlon-pc-gnu/linux} would be a valid alias.
-There is a shell script called
-@uref{ftp://ftp.gnu.org/gnu/config/config.sub, @file{config.sub}}
-that you can use
-as a subroutine to validate system types and canonicalize aliases.
+@samp{athlon-pc-gnu/linux} would be a valid alias. There is a shell
+script called
+@uref{http://git.savannah.gnu.org/@/gitweb/@/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD,
+@file{config.sub}} that you can use as a subroutine to validate system
+types and canonicalize aliases.
The @code{configure} script should also take the option
@option{--build=@var{buildtype}}, which should be equivalent to a
plain @var{buildtype} argument. For example, @samp{configure
--build=i686-pc-linux-gnu} is equivalent to @samp{configure
i686-pc-linux-gnu}. When the build type is not specified by an option
-or argument, the @code{configure} script should normally guess it
-using the shell script
-@uref{ftp://ftp.gnu.org/gnu/config/config.guess, @file{config.guess}}.
+or argument, the @code{configure} script should normally guess it using
+the shell script
+@uref{http://git.savannah.gnu.org/@/gitweb/@/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD,
+@file{config.guess}}.
@cindex optional features, configure-time
Other options are permitted to specify in more detail the software
-or hardware present on the machine, and include or exclude optional
-parts of the package:
+or hardware present on the machine, to include or exclude optional parts
+of the package, or to adjust the name of some tools or arguments to them:
@table @samp
@item --enable-@var{feature}@r{[}=@var{parameter}@r{]}
Do not use a @samp{--with} option to specify the file name to use to
find certain files. That is outside the scope of what @samp{--with}
options are for.
+
+@item @var{variable}=@var{value}
+Set the value of the variable @var{variable} to @var{value}. This is
+used to override the default values of commands or arguments in the
+build process. For example, the user could issue @samp{configure
+CFLAGS=-g CXXFLAGS=-g} to build with debugging information and without
+the default optimization.
+
+Specifying variables as arguments to @code{configure}, like this:
+@example
+./configure CC=gcc
+@end example
+is preferable to setting them in environment variables:
+@example
+CC=gcc ./configure
+@end example
+as it helps to recreate the same configuration later with
+@file{config.status}. However, both methods should be supported.
@end table
-All @code{configure} scripts should accept all of these ``detail''
-options, whether or not they make any difference to the particular
-package at hand. In particular, they should accept any option that
-starts with @samp{--with-} or @samp{--enable-}. This is so users will
-be able to configure an entire GNU source tree at once with a single set
-of options.
+All @code{configure} scripts should accept all of the ``detail''
+options and the variable settings, whether or not they make any
+difference to the particular package at hand. In particular, they
+should accept any option that starts with @samp{--with-} or
+@samp{--enable-}. This is so users will be able to configure an
+entire GNU source tree at once with a single set of options.
You will note that the categories @samp{--with-} and @samp{--enable-}
are narrow: they @strong{do not} provide a place for any sort of option
The @file{README} file should also refer to the file which contains the
copying conditions. The GNU GPL, if used, should be in a file called
@file{COPYING}. If the GNU LGPL is used, it should be in a file called
-@file{COPYING.LIB}.
+@file{COPYING.LESSER}.
Naturally, all the source files must be in the distribution. It is okay
to include non-source files in the distribution, provided they are
distribution. So if you do distribute non-source files, always make
sure they are up to date when you make a new distribution.
-Make sure that the directory into which the distribution unpacks (as
-well as any subdirectories) are all world-writable (octal mode 777).
-This is so that old versions of @code{tar} which preserve the
-ownership and permissions of the files from the tar archive will be
-able to extract all the files even if the user is unprivileged.
-
-Make sure that all the files in the distribution are world-readable.
+Make sure that all the files in the distribution are world-readable, and
+that directories are world-readable and world-searchable (octal mode 755).
+We used to recommend that all directories in the distribution also be
+world-writable (octal mode 777), because ancient versions of @code{tar}
+would otherwise not cope when extracting the archive as an unprivileged
+user. That can easily lead to security issues when creating the archive,
+however, so now we recommend against that.
Don't include any symbolic links in the distribution itself. If the tar
file contains symbolic links, then people cannot even unpack it on
@chapter References to Non-Free Software and Documentation
@cindex references to non-free material
-A GNU program should not recommend use of any non-free program. We
+A GNU program should not recommend, promote, or grant legitimacy to
+the use of any non-free program. Proprietary software is a social and
+ethical problem, and our aim is to put an end to that problem. We
can't stop some people from writing proprietary programs, or stop
other people from using them, but we can and should refuse to
-advertise them to new potential customers. Proprietary software is a
-social and ethical problem, and the point of GNU is to solve that
-problem.
+advertise them to new potential customers, or to give the public the
+idea that their existence is ethical.
The GNU definition of free software is found on the GNU web site at
-@url{http://www.gnu.org/philosophy/free-sw.html}. A list of
-important licenses and whether they qualify as free is in
-@url{http://www.gnu.org/licenses/license-list.html}. The terms
-``free'' and ``non-free'', used in this document, refer to that
-definition. If it is not clear whether a license qualifies as free
-under this definition, please ask the GNU Project by writing to
-@email{licensing@@gnu.org}. We will answer, and if the license is an
-important one, we will add it to the list.
+@url{http://www.gnu.org/@/philosophy/@/free-sw.html}, and the definition
+of free documentation is found at
+@url{http://www.gnu.org/@/philosophy/@/free-doc.html}. The terms ``free''
+and ``non-free'', used in this document, refer to those definitions.
+
+A list of important licenses and whether they qualify as free is in
+@url{http://www.gnu.org/@/licenses/@/license-list.html}. If it is not
+clear whether a license qualifies as free, please ask the GNU Project
+by writing to @email{licensing@@gnu.org}. We will answer, and if the
+license is an important one, we will add it to the list.
When a non-free program or system is well known, you can mention it in
passing---that is harmless, since users who might want to use it
thing. The goal should be that people already using the proprietary
program will get the advice they need about how to use your free
program with it, while people who don't already use the proprietary
-program will not see anything to lead them to take an interest in it.
+program will not see anything likely to lead them to take an interest
+in it.
If a non-free program or system is obscure in your program's domain,
your program should not mention or support it at all, since doing so
would tend to popularize the non-free program more than it popularizes
-your program. (You cannot hope to find many additional users among
-the users of Foobar if the users of Foobar are few.)
+your program. (You cannot hope to find many additional users for your
+program among the users of Foobar, if the existence of Foobar is not
+generally known among people who might want to use your program.)
Sometimes a program is free software in itself but depends on a
non-free platform in order to run. For instance, many Java programs
-depend on Sun's Java implementation, and won't run on the GNU Java
-Compiler (which does not yet have all the features) or won't run with
-the GNU Java libraries. To recommend that program is inherently to
-recommend the non-free platform as well; if you should not do the
-latter, then don't do the former.
+depend on some non-free Java libraries. To recommend or promote such
+a program is to promote the other programs it needs. This is why we
+are careful about listing Java programs in the Free Software
+Directory: we don't want to promote the non-free Java libraries.
+
+We hope this particular problem with Java will be gone by and by, as
+we replace the remaining non-free standard Java libraries with free
+software, but the general principle will remain the same: don't
+recommend, promote or legitimize programs that depend on non-free
+software to run.
+
+Some free programs strongly encourage the use of non-free software. A
+typical example is @command{mplayer}. It is free software in itself,
+and the free code can handle some kinds of files. However,
+@command{mplayer} recommends use of non-free codecs for other kinds of
+files, and users that install @command{mplayer} are very likely to
+install those codecs along with it. To recommend @command{mplayer}
+is, in effect, to promote use of the non-free codecs.
+
+Thus, you should not recommend programs that strongly encourage the
+use of non-free software. This is why we do not list
+@command{mplayer} in the Free Software Directory.
A GNU package should not refer the user to any non-free documentation
for free software. Free documentation that can be included in free
operating systems is essential for completing the GNU system, or any
-free operating system, so it is a major focus of the GNU Project; to
-recommend use of documentation that we are not allowed to use in GNU
-would weaken the impetus for the community to produce documentation
-that we can include. So GNU packages should never recommend non-free
+free operating system, so encouraging it is a priority; to recommend
+use of documentation that we are not allowed to include undermines the
+impetus for the community to produce documentation that we can
+include. So GNU packages should never recommend non-free
documentation.
By contrast, it is ok to refer to journal articles and textbooks in
the comments of a program for explanation of how it functions, even
-though they be non-free. This is because we don't include such things
-in the GNU system even if we are allowed to--they are outside the
-scope of an operating system project.
+though they are non-free. This is because we don't include such
+things in the GNU system even they are free---they are outside the
+scope of what a software distribution needs to include.
Referring to a web site that describes or recommends a non-free
-program is in effect promoting that software, so please do not make
-links (or mention by name) web sites that contain such material. This
-policy is relevant particulary for the web pages for a GNU package.
-
-Following links from nearly any web site can lead to non-free
-software; this is an inescapable aspect of the nature of the web, and
-in itself is no objection to linking to a site. As long as the site
-does not itself recommend a non-free program, there is no need be
-concerned about the sites it links to for other reasons.
-
-Thus, for example, you should not make a link to AT&T's web site,
-because that recommends AT&T's non-free software packages; you should
-not make a link to a site that links to AT&T's site saying it is a
-place to get a non-free program; but if a site you want to link to
-refers to AT&T's web site in some other context (such as long-distance
-telephone service), that is not a problem.
-
-@node Copying This Manual
-@appendix Copying This Manual
-
-@menu
-* GNU Free Documentation License:: License for copying this manual
-@end menu
-
+program is promoting that program, so please do not make links (or
+mention by name) web sites that contain such material. This policy is
+relevant particularly for the web pages for a GNU package.
+
+Following links from nearly any web site can lead eventually to
+non-free software; this is inherent in the nature of the web. So it
+makes no sense to criticize a site for having such links. As long as
+the site does not itself recommend a non-free program, there is no
+need to consider the question of the sites that it links to for other
+reasons.
+
+Thus, for example, you should not refer to AT&T's web site if that
+recommends AT&T's non-free software packages; you should not refer to
+a site that links to AT&T's site presenting it as a place to get some
+non-free program, because that link recommends and legitimizes the
+non-free program. However, that a site contains a link to AT&T's web
+site for some other purpose (such as long-distance telephone service)
+is not an objection against it.
+
+@node GNU Free Documentation License
+@appendix GNU Free Documentation License
+
+@cindex FDL, GNU Free Documentation License
@include fdl.texi
@node Index
time-stamp-start: "@set lastupdate "
time-stamp-end: "$"
time-stamp-format: "%:b %:d, %:y"
-compile-command: "make just-standards"
+compile-command: "cd work.s && make"
End: