@setfilename standards.info
@settitle GNU Coding Standards
@c This date is automagically updated when you save this file:
-@set lastupdate July 25, 2008
+@set lastupdate February 17, 2010
@c %**end of header
@dircategory GNU organization
The GNU coding standards, last updated @value{lastupdate}.
Copyright @copyright{} 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software
+2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.2
-or any later version published by the Free Software Foundation;
-with no Invariant Sections, with no
-Front-Cover Texts, and with no Back-Cover Texts.
-A copy of the license is included in the section entitled ``GNU
-Free Documentation License''.
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
+Texts. A copy of the license is included in the section entitled
+``GNU Free Documentation License''.
@end copying
@titlepage
even if you write in another programming language. The rules often
state reasons for writing in a certain way.
-This release of the GNU Coding Standards was last updated
-@value{lastupdate}.
-
@cindex where to obtain @code{standards.texi}
@cindex downloading this manual
If you did not obtain this file directly from the GNU project and
different formats, including the Texinfo source, PDF, HTML, DVI, plain
text, and more, at: @uref{http://www.gnu.org/prep/standards/}.
+If you are maintaining an official GNU package, in addition to this
+document, please read and follow the GNU maintainer information
+(@pxref{Top, , Contents, maintain, Information for Maintainers of GNU
+Software}).
+
+@cindex @code{gnustandards-commit@@gnu.org} mailing list
+If you want to receive diffs for every change to these GNU documents,
+join the mailing list @code{gnustandards-commit@@gnu.org}, via the web
+interface at
+@url{http://lists.gnu.org/mailman/listinfo/gnustandards-commit}.
+Archives are also available there.
+
Corrections or suggestions for this document should be sent to
@email{bug-standards@@gnu.org}. If you make a suggestion, please include a
suggested new wording for it; our time is limited. We prefer a context
coding standards for a trivial program.
@uref{http://www.gnu.org/software/hello/hello.html}.
+This release of the GNU Coding Standards was last updated
+@value{lastupdate}.
+
+
@node Legal Issues
@chapter Keeping Free Software Free
@cindex legal aspects
write modern GUI functionality within Guile. We don't reject programs
written in other ``scripting languages'' such as Perl and Python, but
using Guile is very important for the overall consistency of the GNU
-system.
+system.
@node Compatibility
GCC developers many hours, or even days, per year.
In the case of function-like macros like @code{REVERSIBLE_CC_MODE} in
-GCC which cannot be simply used in @code{if( ...)} statements, there is
+GCC which cannot be simply used in @code{if (...)} statements, there is
an easy workaround. Simply introduce another macro
@code{HAS_REVERSIBLE_CC_MODE} as in the following example:
* Graphical Interfaces:: Standards for graphical interfaces.
* Command-Line Interfaces:: Standards for command line interfaces.
* Option Table:: Table of long options.
+* OID Allocations:: Table of OID slots for GNU.
* Memory Usage:: When and how to care about memory needs.
* File Usage:: Which files to use, and where.
@end menu
avoid this problem by creating temporary files in this manner:
@example
-fd = open(filename, O_WRONLY | O_CREAT | O_EXCL, 0600);
+fd = open (filename, O_WRONLY | O_CREAT | O_EXCL, 0600);
@end example
@noindent
@cindex address for bug reports
@cindex bug reports
-Near the end of the @samp{--help} option's output there should be a line
-that says where to mail bug reports. It should have this format:
+Near the end of the @samp{--help} option's output, please place lines
+giving the email address for bug reports, the package's home page
+(normally @indicateurl{http://www.gnu.org/software/@var{pkg}}, and the
+general page for help using GNU programs. The format should be like this:
@example
-Report bugs to @var{mailing-address}.
+Report bugs to: @var{mailing-address}
+@var{pkg} home page: <http://www.gnu.org/software/@var{pkg}/>
+General help using GNU software: <http://www.gnu.org/gethelp/>
@end example
+It is ok to mention other appropriate mailing lists and web pages.
+
@node Option Table
@section Table of Long Options
@samp{-z} in @code{gprof}.
@end table
+@node OID Allocations
+@section OID Allocations
+@cindex OID allocations for GNU
+@cindex SNMP
+@cindex LDAP
+@cindex X.509
+
+The OID (object identifier) 1.3.6.1.4.1.11591 has been assigned to the
+GNU Project (thanks to Werner Koch). These are used for SNMP, LDAP,
+X.509 certificates, and so on. The web site
+@url{http://www.alvestrand.no/objectid} has a (voluntary) listing of
+many OID assignments.
+
+If you need a new slot for your GNU package, write
+@email{maintainers@@gnu.org}. Here is a list of arcs currently
+assigned:
+
+@example
+@include gnu-oids.texi
+@end example
+
+
@node Memory Usage
@section Memory Usage
@cindex memory usage
The change log file is normally called @file{ChangeLog} and covers an
entire directory. Each directory can have its own change log, or a
-directory can use the change log of its parent directory--it's up to
+directory can use the change log of its parent directory---it's up to
you.
Another alternative is to record change log information with a version
to a @file{ChangeLog} file using @code{rcs2log}; in Emacs, the command
@kbd{C-x v a} (@code{vc-update-change-log}) does the job.
-There's no need to describe the full purpose of the changes or how they
-work together. If you think that a change calls for explanation, you're
-probably right. Please do explain it---but please put the explanation
-in comments in the code, where people will see it whenever they see the
-code. For example, ``New function'' is enough for the change log when
-you add a function, because there should be a comment before the
-function definition to explain what it does.
+There's no need to describe the full purpose of the changes or how
+they work together. However, sometimes it is useful to write one line
+to describe the overall purpose of a change or a batch of changes. If
+you think that a change calls for explanation, you're probably right.
+Please do explain it---but please put the full explanation in comments
+in the code, where people will see it whenever they see the code. For
+example, ``New function'' is enough for the change log when you add a
+function, because there should be a comment before the function
+definition to explain what it does.
In the past, we recommended not mentioning changes in non-software
files (manuals, help files, etc.) in change logs. However, we've been
advised that it is a good idea to include them, for the sake of
copyright records.
-However, sometimes it is useful to write one line to describe the
-overall purpose of a batch of changes.
-
The easiest way to add an entry to @file{ChangeLog} is with the Emacs
command @kbd{M-x add-change-log-entry}. An entry should have an
asterisk, the name of the changed file, and then in parentheses the name
is more authoritative. The note should say how to access the Texinfo
documentation.
-Be sure that man pages include a copyright statement and free
-license. The simple all-permissive license is appropriate for simple
-man pages:
-
-@example
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.
-@end example
+Be sure that man pages include a copyright statement and free license.
+The simple all-permissive license is appropriate for simple man pages
+(@pxref{License Notices for Other Files,,,maintain,Information for GNU
+Maintainers}).
For long man pages, with enough explanation and documentation that
they can be considered true manuals, use the GFDL (@pxref{License for
CC=gcc ./configure
@end example
as it helps to recreate the same configuration later with
-@file{config.status}.
+@file{config.status}. However, both methods should be supported.
@end table
All @code{configure} scripts should accept all of the ``detail''
The @file{README} file should also refer to the file which contains the
copying conditions. The GNU GPL, if used, should be in a file called
@file{COPYING}. If the GNU LGPL is used, it should be in a file called
-@file{COPYING.LIB}.
+@file{COPYING.LESSER}.
Naturally, all the source files must be in the distribution. It is okay
to include non-source files in the distribution, provided they are
distribution. So if you do distribute non-source files, always make
sure they are up to date when you make a new distribution.
-Make sure that the directory into which the distribution unpacks (as
-well as any subdirectories) are all world-writable (octal mode 777).
-This is so that old versions of @code{tar} which preserve the
-ownership and permissions of the files from the tar archive will be
-able to extract all the files even if the user is unprivileged.
-
-Make sure that all the files in the distribution are world-readable.
+Make sure that all the files in the distribution are world-readable, and
+that directories are world-readable and world-searchable (octal mode 755).
+We used to recommend that all directories in the distribution also be
+world-writable (octal mode 777), because ancient versions of @code{tar}
+would otherwise not cope when extracting the archive as an unprivileged
+user. That can easily lead to security issues when creating the archive,
+however, so now we recommend against that.
Don't include any symbolic links in the distribution itself. If the tar
file contains symbolic links, then people cannot even unpack it on
time-stamp-start: "@set lastupdate "
time-stamp-end: "$"
time-stamp-format: "%:b %:d, %:y"
-compile-command: "make just-standards"
+compile-command: "cd work.s && make"
End:
projects / gnulib.git / blobdiff