#
# Sample config for Mir
# by Matthias <mjordan@code-fu.de> 2001-09-12
+# reorganized by <init@nadir.org> 2003-02-12
#
# The Mir software realizes a semi-dynamic web service:
-# The web server that is accessed by users has pure static
+# The web server that is accessed by readers has pure static
# pages. These pages are generated by the Mir software that
# consists of a collection of Java servlets and HTML templates.
+#
# Mir uses a database server to store the data that is needed to
# build the static site.
# So there are basically three parts in this config file:
#
-# a) general setup
+# a) general & admin setup
# b) static site config
-# c) dynamic admin site
+# c) dynamic site
# d) database config
#
# edit this to suit your needs
-# After you edited this file, build.sh has to be invoked.
-# To be sure, also restart Tomcat.
+# After editing this file, two steps need to be taken to make the changes effective:
+# 1. ant has to be invoked.
+# 2. tomcat needs to be restarted.
#
-# Note that for Mir to work, Tomcat has to be set up to handle all
-# URLs that begin with /servlet. All other URLs are handled by Apache.
+# This file only contains the properties that are most often changed. To view all
+# possible config values, refer to the file default.properties, located in the
+# source directory. Don't change settings in default.properties however, instead
+# use this file.
#
-# There are more configuration values located in the default.properties file
-# located in source/. If necessary these values can be overridden in this file.
+# Note: for filename values, by default, files are used relative to the servlet's
+# WEB-INF directory.
#
# The setup uses the following assumptions:
-# The URL to reach the site is http://indy.code-fu.de
-# The StorageRoot of this URL is /pub/Dokumente/Indymedia/de-tech/Mir
-# All data is located below this directory, including the servlets.
+# The URL to reach the site is http://mir.someserver.org
+# The StorageRoot of this URL is /var/www/project/site/
+# All produced pages and media are located below this directory.
+################################################
+############ A) GENERAL SETUP ##############
+################################################
+# mir/project an contact information
+# for display on the site
#
-#
-# GENERAL SETUP
-#
-
-### mir/imc information
-Mir.Name=mir.indymedia.org
+Mir.Name=mir.someserver.org
Mir.Shortname=mir
-Mir.Contact-email.address=mir-coders@lists.indymedia.org
-Mir.Contact-email.name=mir-coders mailinglist
-Mir.Tech-email.address=mir-coders@lists.indymedia.org
-Mir.Tech-email.name=mir-coders mailinglist
-Mir.Public-email.address=mir-coders@lists.indymedia.org
-Mir.Public-email.name=mir-coders mailinglist
-DirectOpenposting=yes
+Mir.Contact-email.address=mir-project@somemailserver.org
+Mir.Contact-email.name=mir-project mailinglist
+
+Mir.Tech-email.address=mir-admins@somemailserver.org
+Mir.Tech-email.name=mir-admins mailinglist
+
+Mir.Public-email.address=project@somemailserver.org
+Mir.Public-email.name=project mailinglist
# Default timezone to display times in in admin, producers
+# use CET for Central European Time (Paris, Amsterdam)
+# more timezones here: http://www.postgresql.org/docs/7.2/static/timezones.html
+#
Mir.DefaultTimezone= UTC
# Default date/time format
+# For the syntax of the format, refer to
+# http://java.sun.com/j2se/1.3/docs/api/java/text/SimpleDateFormat.html
Mir.DefaultDateTimeFormat = yyyy-MM-dd HH:mm
-#where to put the lucene index
-IndexPath=/tmp/index
-
-# temp-dir used for media-uploads
-TempDir=/tmp
-
-Log.LogClass = mir.log.log4j.LoggerImpl
-Log.log4j.ConfigurationFile = etc/log4j.properties
-Log.Home = log
-
-Mir.Localizer=mircoders.localizer.basic.MirBasicLocalizer
+# For missing values, the FallbackLanguage is used as default
+#
+Mir.Admin.FallbackLanguage=en
-# The location of the producer specifiations
-Mir.Localizer.ProducerConfigFile=etc/producer/producers.xml
+#################################
+# admin interface configuration #
+#################################
# Settings for the admin login:
# If the default language is left empty, it will set the accept-language of
# the client browser as the default.
+#
Mir.Login.DefaultLanguage=en
Mir.Login.Languages=en;de;fr;nl;es;pt;eu;sv;tr;zh;gz
-# For missing values, the FallbackLanguage is used as default
-Mir.Admin.FallbackLanguage=en
-
# Show who's logged in?
+#
Mir.Admin.ShowLoggedinUsers=1
-# the templates
-Mir.Localizer.Producer.GeneratorLibrary= default=freemarker(etc/producer/)
-Mir.Localizer.Admin.GeneratorLibrary= default=freemarker(templates/admin/)
-Mir.Localizer.OpenPosting.GeneratorLibrary= default=freemarker(etc/open/)
-
-# How should the custom operations (hide etc) in article and comment lists
-# be presented?
-# 0 = links, 1 = checkboxes, 2 = a listbox
-Mir.Localizer.Admin.ListOperationsFlavor=1
-
-# How should the topics be presented on the article edit page?
-# 0 = in a multiselect list box, 1 = checkboxes
-Mir.Localizer.Admin.TopicListFlavor=1
-
-# For the checkboxes flavour, how many columns should there be?
-Mir.Localizer.Admin.TopicListColumns=3
-
-# In which order should the topic appear?
-Mir.Localizer.Admin.TopicListOrder=title
-
# enable deletion of comments/articles?
+#
Mir.Localizer.Admin.AllowDeleteComment=1
Mir.Localizer.Admin.AllowDeleteArticle=1
+#######################
+# automated producers #
+#######################
-# Article Preview Link URL (Link to produced articles from within admin)
-Comment.PublicUrl=http://production.indy.code-foo.org/en/${date.formatted.yyyy}/${date.formatted.MM}/${id}.shtml
-Article.PublicUrl=http://production.indy.code-foo.org/en/${to_content.date.formatted.yyyy}/${to_content.date.formatted.MM}/${to_content.id}.shtml
-
+# Which producers need to be called after an article is posted
+#
+Mir.Localizer.OpenPosting.ContentProducers= \
+media.new;articles.changed;startpage.generate;synchronization.run
-# Which producers need to be called after an article (resp. a comment) is posted
-Mir.Localizer.OpenPosting.ContentProducers= media.new;articles.changed;startpage.generate;synchronization.run
-Mir.Localizer.OpenPosting.CommentProducers= articles.changed;synchronization.run
+# Which producers need to be called after a comment is posted
+#
+Mir.Localizer.OpenPosting.CommentProducers= \
+articles.changed;synchronization.run
# Which producers need to be called after the "produce all new" link is clicked from admin
-Mir.Localizer.Producer.AllNewProducers= media.new;articles.changed;startpage.run;synchronization.run
+#
+Mir.Localizer.Producer.AllNewProducers= \
+media.new;articles.changed;startpage.run;synchronization.run
+
+#########
+# rsync #
+#########
#use rsync to mirror the website to a remote-host
+#
Rsync=no
-Rsync.Script.Path=/var/www/bin/rsync-copy
-
-# the maximum allowed size of an uploaded media file in KB.
-MaxMediaUploadSize=20000
-
-# the maximum number of allowed media items to upload at once.
-ServletModule.OpenIndy.MaxMediaUploadItems=20
+Rsync.Script.Path=/var/www/bin/rsync-copy.sh
-# the default number of media items to upload at once
-ServletModule.OpenIndy.DefaultMediaUploadItems=1
+###################
+# FileEdit module #
+###################
+# for extra flexibility editors can edit text-files from within the admin-interface
+# these files can then be included in webpages using SSI as footer or announcement-box...
#
+# a list of directories to edit
+# format:
+# <name>:<path>:<file filter>:<0|1 (recursion off or on)> [, ....]
#
-# STATIC SITE CONFIG
-#
+ServletModule.FileEdit.Configuration= \
+ includes:/var/www/project/site/includes:.*\\.inc:1
+
+################################################
+########### B) STATIC SITE CONFIG #############
+################################################
# the url of the static site
-Producer.ProductionHost=http://indy.code-fu.de
+# on the machine where mir runs on
+#
+Producer.ProductionHost=http://mir.someserver.org
# the url of the public site
-Producer.PublicationHost=http://indy.code-fu.de
+# only different from ProductionHost if pages are copied to
+# one ore more mirror-servers for delivery
+#
+Producer.PublicationHost=http://mir.someserver.org
# Produrce.StorageRoot is the directory, in which
# the generated HTML pages will be stored
-Producer.StorageRoot=/pub/Dokumente/Indymedia/de-tech/Mir/produced
-
-# FileEdit module
-# a list of directories to edit
-# format:
-# <name>:<path>:<file filter>:<0|1 (recursion off or on)> [, ....]
-ServletModule.FileEdit.Configuration= \
- includes:/pub/Dokumente/Indymedia/de-tech/Mir/produced/inc:.*\\.inc:1
-
-
-#
-#
-# DYNAMIC SITE CONFIG
#
+Producer.StorageRoot=/var/www/project/site/
-# the url of the openposting-servlet
-Producer.OpenAction=http://indy.code-fu.de/Mir/servlet/OpenMir
-
-# use this property if the pages are not produced under the docRoot
+# use this property only if the pages are NOT produced under the docRoot
# of the webserver. all links in the produced pages are prepended
# with Producer.DocRoot
+#
Producer.DocRoot=
-Producer.ActionServlet=/servlet/Mir
-# this is the name of the subdirectory where the image-dir
-# will be linked to.
-Producer.ImageRoot=/img
+#####################
+# media server URLs #
+#####################
+# for better performance or load-sharing
+# images/media can be copied to (and served from) different servers
+# only in this case image- and medialinks need different URLs.
# the url of the video-server
-Producer.Video.Host=http://indy.code-fu.de/video
+#
+Producer.Video.Host=http://mir.someserver.org/video
# the url of the audio-server
-Producer.Audio.Host=http://indy.code-fu.de/audio
+#
+Producer.Audio.Host=http://mir.someserver.org/audio
# the url of the image-server
-Producer.Image.Host=http://indy.code-fu.de/images
+#
+Producer.Image.Host=http://mir.someserver.org/images
# the url of the media-server
-Producer.Media.Host=http://indy.code-fu.de/media
+#
+Producer.Media.Host=http://mir.someserver.org/media
# the url of the real-media-server
-Producer.RealMedia.Host=rtsp://some.media.server/somedir/
+#
+Producer.RealMedia.Host=rtsp://some.streamingmedia.server/somedir/
+
-# image specific storage directories
+############################################
+# image/media specific storage directories #
+############################################
+
# absolute directory, where the images are saved
-Producer.Image.Path=/pub/Dokumente/Indymedia/de-tech/Mir/produced/images/
+#
+Producer.Image.Path=/var/www/project/site/images/
+
-# media specific storage directories
# absolute directory, where the media files are saved
-Producer.Media.Path=/pub/Dokumente/Indymedia/de-tech/Mir/produced/media
+#
+Producer.Media.Path=/var/www/project/site/media
# absolute directory, where the realmedia data files(ra and rm) are saved
# the ram files which point to the RealMedia.Host get saved in the regular Media dir
# this should make rsyncing to a separate streaming server much easier
-Producer.RealMedia.Path=/pub/Dokumente/rtsp
+#
+Producer.RealMedia.Path=/var/www/project/site/rtsp
+# mir creates a small thumbnail-icon for each image posted
# relativ directory, where the thumbnails will be saved
+#
Producer.Image.IconPath=/icon
+
+####################
+# media-type-icons #
+####################
+
+# by default they are stored in the webservers [docRoot]/img directory
+# they are distibuted with the mir-source (etc/producer/images)
+# use the "staticimages.generate" producer once to copy them in place
+#
+
# Tiny Icons for the media types on the newswire summary.
# (right hand side of start page)
+#
Producer.Icon.TinyImage=photo_small.gif
Producer.Icon.TinyAudio=audio_small.gif
Producer.Icon.TinyVideo=video_small.gif
Producer.Icon.TinyText=text_small.gif
#Medium sized icons used at various places
+#
Producer.Icon.BigImage=photo_big.gif
Producer.Icon.BigAudio=audio_big.gif
Producer.Icon.BigVideo=video_big.gif
Producer.Icon.BigText=text_big.gif
#Icons used for links
+#
Producer.ExtLinkName=extlink.gif
Producer.IntLinkName=intlink.gif
Producer.MailLinkName=maillink.gif
-#the style sheet used to turn html into xsl:fo
-#this is not currently in use, so don't worry about it
-Producer.HTML2FOStyleSheet=/some/dir/mir/etc/producer/html2fo.xsl
-
-# the following lines are used to construct PDFs on the fly from one or more articles
-# for the moment, if you want to change anything else about your pdfs, you
-# will have to learn some java!
-#
-# keep in mind that there may not be enough room for all the text you enter as the
-# value of one these options, if text doesn't appear, the only easy thing to do is
-# use less text!
+# this is the name of the subdirectory where the image-dir
+# will be linked to.
#
+Producer.ImageRoot=/img
-# a single line of big text which will appear at the top of the first page of all generated pdfs
-PDF.Title=INDYMEDIA SOMEWHERE
-# about two lines of small text which will appear at the bottom of every page
+################################################
+########### C) DYNAMIC SITE CONFIG #############
+################################################
-PDF.Footer=Indymedia does blah. Content is good, and free to use for non-commercial purposes under the Open Content license. if you have questions, email someone.
-
+# the main mir-servlet
#
-# the size paper your target audience will likely have in their printers. pick one of A4 or LETTER
+Producer.ActionServlet=/servlet/Mir
+
+# the url of the openposting-servlet
#
+Producer.OpenAction=http://mir.someserver.org/servlet/OpenMir
-PDF.PageSize=A4
+# the maximum allowed size of an uploaded media file in KB.
+#
+MaxMediaUploadSize=20000
+# the maximum number of allowed media items to upload at once.
+#
+ServletModule.OpenIndy.MaxMediaUploadItems=20
+
+# the default number of media items to upload at once
+#
+ServletModule.OpenIndy.DefaultMediaUploadItems=1
+
+# path to ImageMagick executables. Default is "" (nothing), which
+# means executables will be searched using the default system PATH
+# example:Producer.Image.ImageMagickPath=/usr/local/ImageMagick/bin
#
-# edit with caution below this line
-######################################################################
+Producer.Image.ImageMagickPath=
+
+######################
+# PDF configurations #
+######################
+
+# the following lines are used to construct PDFs on the fly from one or more articles
+# for the moment, if you want to change anything else about your pdfs, you
+# will have to learn some java!
#
+# keep in mind that there may not be enough room for all the text you enter as the
+# value of one these options, if text doesn't appear, the only easy thing to do is
+# use less text!
#
-# DATABASE SETUP
+
+# a single line of big text which will appear at the top of the first page of all generated pdfs
#
+PDF.Title=SOME MIR-SITE
+# about two lines of small text which will appear at the bottom of every page
#
-# specify your database
+PDF.Footer=Mir-CMS PDF-Newsletter. Content is good, and free to use for non-commercial purposes under the Open Content license. If you have questions, email someone.
-Database.poolMin=1
-Database.poolMax=10
-Database.poolResetTime=1.0
-Database.PoolLog=log/pool.log
-Database.Limit=20
+# the size paper your target audience will likely have in their printers.
+# pick one of A4 or LETTER
+#
+PDF.PageSize=A4
+
+################################################
+############ D) DATABASE CONFIG ##############
+################################################
+
+# specify your database
+#
+Database.Name=Mir
Database.Username=postgres
Database.Password=
+
Database.Host=localhost
-Database.Name=Mir
Database.Port=5432
Database.Driver=org.postgresql.Driver
-#
-# Servlet / Module configurations
-#
+############################################
+# encoding configuration #
+############################################
-# don't change this unless you really know your i18n.
# The default encoding charset used in the written html files as well
# as the dynamic output html.
-# also used for the HTML charset meta tag.
-Mir.DefaultEncoding=UTF8
-
-# this encoding is used for the HTML charset meta tag.
-# it must be the html charset equivalent of the Java encoding above
-# don't change this unless...
Mir.DefaultHTMLCharset=UTF-8
+
+# The java equivalent of Mir.DefaultHTMLCharset
+Mir.DefaultEncoding=UTF8