echo "executing $*"
"$@"
else
- # Commands like automake produce output to stderr even when the succeed.
+ # Commands like automake produce output to stderr even when they succeed.
# Turn this output off if the command succeeds.
"$@" > "$tmp"/cmdout 2>&1
cmdret=$?
echo "${libname}_${libext}_DEPENDENCIES += @${perhapsLT}ALLOCA@"
fi
} > amsnippet.tmp
- # Skip the contents if its entirely empty.
+ # Skip the contents if it's entirely empty.
if grep '[^ ]' amsnippet.tmp > /dev/null ; then
echo "## begin gnulib module $module"
echo
echo "AM_CPPFLAGS ="
fi
echo
- if LC_ALL=C grep "^[a-zA-Z0-9_]*_${perhapsLT}LIBRARIES *= *$libname\\.$libext\$" allsnippets.tmp > /dev/null; then
+ if LC_ALL=C grep "^[a-zA-Z0-9_]*_${perhapsLT}LIBRARIES *+\{0,1\}= *$libname\\.$libext\$" allsnippets.tmp > /dev/null; then
# One of the snippets already specifies an installation location for the
# library. Don't confuse automake by saying it should not be installed.
:
echo
echo "${libname}_${libext}_SOURCES ="
# Here we use $(LIBOBJS), not @LIBOBJS@. The value is the same. However,
- # automake during its analyses looks for $(LIBOBJS), not for @LIBOBJS@.
+ # automake during its analysis looks for $(LIBOBJS), not for @LIBOBJS@.
echo "${libname}_${libext}_LIBADD = \$(${macro_prefix}_${perhapsLT}LIBOBJS)"
echo "${libname}_${libext}_DEPENDENCIES = \$(${macro_prefix}_${perhapsLT}LIBOBJS)"
echo "EXTRA_${libname}_${libext}_SOURCES ="
}
# func_emit_po_Makevars
-# emits the contents of po/ makefile parametrization to standard output.
+# emits the contents of po/ makefile parameterization to standard output.
# Input:
# - local_gnulib_dir from --local-dir
# - sourcebase directory relative to destdir where to place source code
echo "libtests_a_DEPENDENCIES += @${perhapsLT}ALLOCA@"
fi
} > amsnippet.tmp
- # Skip the contents if its entirely empty.
+ # Skip the contents if it's entirely empty.
if grep '[^ ]' amsnippet.tmp > /dev/null ; then
echo "## begin gnulib module $module"
echo
if $use_libtests; then
echo "libtests_a_SOURCES ="
# Here we use $(LIBOBJS), not @LIBOBJS@. The value is the same. However,
- # automake during its analyses looks for $(LIBOBJS), not for @LIBOBJS@.
+ # automake during its analysis looks for $(LIBOBJS), not for @LIBOBJS@.
echo "libtests_a_LIBADD = \$(${macro_prefix}tests_LIBOBJS)"
echo "libtests_a_DEPENDENCIES = \$(${macro_prefix}tests_LIBOBJS)"
echo "EXTRA_libtests_a_SOURCES ="
# We let automake know about the files to be distributed through the
# EXTRA_lib_SOURCES variable.
echo " m4_pushdef([AC_LIBSOURCES], m4_defn([${macro_prefix_arg}_LIBSOURCES]))"
+ # Create data variables for checking the presence of files that are mentioned
+ # as AC_LIBSOURCES arguments. These are m4 variables, not shell variables,
+ # because we want the check to happen when the configure file is created,
+ # not when it is run. ${macro_prefix_arg}_LIBSOURCES_LIST is the list of
+ # files to check for. ${macro_prefix_arg}_LIBSOURCES_DIR is the subdirectory
+ # in which to expect them.
+ echo " m4_pushdef([${macro_prefix_arg}_LIBSOURCES_LIST], [])"
+ echo " m4_pushdef([${macro_prefix_arg}_LIBSOURCES_DIR], [])"
echo " gl_COMMON"
}
func_emit_initmacro_end ()
{
macro_prefix_arg="$1"
+ # Check the presence of files that are mentioned as AC_LIBSOURCES arguments.
+ # The check is performed only when autoconf is run from the directory where
+ # the configure.ac resides; if it is run from a different directory, the
+ # check is skipped.
+ echo " m4_ifval(${macro_prefix_arg}_LIBSOURCES_LIST, ["
+ echo " m4_syscmd([test ! -d ]m4_defn([${macro_prefix_arg}_LIBSOURCES_DIR])[ ||"
+ echo " for gl_file in ]${macro_prefix_arg}_LIBSOURCES_LIST[ ; do"
+ echo " if test ! -r ]m4_defn([${macro_prefix_arg}_LIBSOURCES_DIR])[/\$gl_file ; then"
+ echo " echo \"missing file ]m4_defn([${macro_prefix_arg}_LIBSOURCES_DIR])[/\$gl_file\" >&2"
+ echo " exit 1"
+ echo " fi"
+ echo " done])dnl"
+ echo " m4_if(m4_sysval, [0], [],"
+ echo " [AC_FATAL([expected source file, required through AC_LIBSOURCES, not found])])"
+ echo " ])"
+ echo " m4_popdef([${macro_prefix_arg}_LIBSOURCES_DIR])"
+ echo " m4_popdef([${macro_prefix_arg}_LIBSOURCES_LIST])"
echo " m4_popdef([AC_LIBSOURCES])"
echo " m4_popdef([AC_REPLACE_FUNCS])"
echo " m4_popdef([AC_LIBOBJ])"
echo " ${macro_prefix_arg}_LIBOBJS=\"\$${macro_prefix_arg}_LIBOBJS \$1.\$ac_objext\""
echo "])"
echo
- echo "# m4_foreach_w is provided by autoconf-2.59c and later."
- echo "# This definition is to accommodate developers using versions"
- echo "# of autoconf older than that."
- echo "m4_ifndef([m4_foreach_w],"
- echo " [m4_define([m4_foreach_w],"
- echo " [m4_foreach([\$1], m4_split(m4_normalize([\$2]), [ ]), [\$3])])])"
- echo
echo "# Like AC_REPLACE_FUNCS, except that the module name goes"
echo "# into ${macro_prefix_arg}_LIBOBJS instead of into LIBOBJS."
echo "AC_DEFUN([${macro_prefix_arg}_REPLACE_FUNCS], ["
echo "])"
echo
echo "# Like AC_LIBSOURCES, except the directory where the source file is"
- echo "# expected is derived from the gnulib-tool parametrization,"
+ echo "# expected is derived from the gnulib-tool parameterization,"
echo "# and alloca is special cased (for the alloca-opt module)."
echo "# We could also entirely rely on EXTRA_lib..._SOURCES."
echo "AC_DEFUN([${macro_prefix_arg}_LIBSOURCES], ["
echo " m4_foreach([_gl_NAME], [\$1], ["
echo " m4_if(_gl_NAME, [alloca.c], [], ["
- echo " m4_syscmd([test -r $sourcebase_arg/]_gl_NAME[ || test ! -d $sourcebase_arg])dnl"
- echo " m4_if(m4_sysval, [0], [],"
- echo " [AC_FATAL([missing $sourcebase_arg/]_gl_NAME)])"
+ echo " m4_define([${macro_prefix_arg}_LIBSOURCES_DIR], [$sourcebase_arg])"
+ echo " m4_append([${macro_prefix_arg}_LIBSOURCES_LIST], _gl_NAME, [ ])"
echo " ])"
echo " ])"
echo "])"
s,^.*gl_LOCAL_DIR([[ ]*\([^])]*\).*$,cached_local_gnulib_dir="\1",p
}
/gl_MODULES(/ {
+ :a
+ s/)/)/
+ tb
+ N
+ ba
+ :b
s,^.*gl_MODULES([[ ]*\([^])]*\).*$,cached_specified_modules="\1",p
}
/gl_AVOID(/ {
func_append added_files "$pobase/$file$nl"
fi
done
- # Create po makefile parametrization, part 1.
+ # Create po makefile parameterization, part 1.
func_dest_tmpfilename $pobase/Makevars
func_emit_po_Makevars > "$tmpfile"
if test -f "$destdir"/$pobase/Makevars; then
fi
func_append added_files "$pobase/Makevars$nl"
fi
- # Create po makefile parametrization, part 2.
+ # Create po makefile parameterization, part 2.
func_dest_tmpfilename $pobase/POTFILES.in
func_emit_po_POTFILES_in > "$tmpfile"
if test -f "$destdir"/$pobase/POTFILES.in; then
esac ;;
esac
echo "gl_LOCAL_DIR([$relative_local_gnulib_dir])"
- echo "gl_MODULES(["`echo $specified_modules`"])"
+ echo "gl_MODULES(["
+ echo "$specified_modules" | sed 's/^/ /g'
+ echo "])"
echo "gl_AVOID([$avoidlist])"
echo "gl_SOURCE_BASE([$sourcebase])"
echo "gl_M4_BASE([$m4base])"
# Update the .cvsignore and .gitignore files.
{ echo "$added_files" | sed -e '/^$/d' -e 's,\([^/]*\)$,|A|\1,'
echo "$removed_files" | sed -e '/^$/d' -e 's,\([^/]*\)$,|R|\1,'
+ # Treat gnulib-comp.m4 like an added file, even if it already existed.
+ echo "$m4base/|A|gnulib-comp.m4"
} | LC_ALL=C sort -t'|' -k1,1 > "$tmp"/fileset-changes
{ # Rearrange file descriptors. Needed because "while ... done < ..."
# constructs are executed in a subshell e.g. by Solaris 10 /bin/sh.
fi
fi
echo " - mention \"-I ${m4base}\" in ACLOCAL_AMFLAGS in Makefile.am,"
+ {
+ # Find the first parent directory of $m4base that contains a Makefile.am.
+ sed_last='s,^.*/\([^/][^/]*\)//*$,\1/,
+s,//*$,/,'
+ sed_butlast='s,[^/][^/]*//*$,,'
+ dir1="${m4base}/"; dir2=""
+ while test -n "$dir1" && test ! -f "${destdir}/${dir1}Makefile.am"; do
+ dir2=`echo "$dir1" | sed -e "$sed_last"`"$dir2"
+ dir1=`echo "$dir1" | sed -e "$sed_butlast"`
+ done
+ echo " - mention ${dir2}gnulib-cache.m4 in EXTRA_DIST in ${dir1}Makefile.am."
+ }
echo " - invoke ${macro_prefix}_EARLY in $configure_ac, right after AC_PROG_CC,"
echo " - invoke ${macro_prefix}_INIT in $configure_ac."
}
projects / gnulib.git / blobdiff