-noinst_LIBRARIES = fu
-
-DIST_OTHER = alloca.c euidaccess.c fnmatch.c fsusage.c ftruncate.c \
-getdate.y memcmp.c memcpy.c memset.c mkdir.c mktime.c mountlist.c \
-posixtm.y rename.c rmdir.c stpcpy.c strdup.c strstr.c strtol.c strtoul.c
-
-INCLUDES = -I.. -I$(srcdir)
-
-fu_SOURCES = getdate.c posixtm.c argmatch.c backupfile.c basename.c \
-dirname.c error.c fileblocks.c filemode.c \
-full-write.c getopt.c getopt1.c getversion.c group-member.c idcache.c \
-isdir.c long-options.c makepath.c modechange.c obstack.c \
-safe-read.c save-cwd.c savedir.c stripslash.c userspec.c xgetcwd.c \
-xmalloc.c xstrdup.c xstrtol.c xstrtoul.c yesno.c
-
-fu_LIBADD = @LIBOBJS@ @ALLOCA@
-
-noinst_HEADERS = argmatch.h backupfile.h error.h fnmatch.h fsusage.h \
-getopt.h group-member.h long-options.h makepath.h modechange.h mountlist.h \
-obstack.h pathmax.h save-cwd.h xstrtol.h xstrtoul.h
-
-BUILT_SOURCES = getdate.c posixtm.c
-
-# Since this directory contains two parsers, we have to be careful to avoid
-# running two $(YACC)s during parallel makes. See below.
-getdate.c: getdate.y
- @echo expect 10 shift/reduce conflicts
- $(YACC) $(srcdir)/getdate.y
- mv y.tab.c getdate.c
-
-# Make the rename atomic, in case sed is interrupted and later rerun.
-# The artificial dependency on getdate.c keeps the two parsers from being
-# built in parallel. Enforcing this little bit of sequentiality lets
-# everyone (even those without bison) still run mostly parallel builds.
-posixtm.c: posixtm.y getdate.c
- $(YACC) $(srcdir)/posixtm.y
- mv y.tab.c posixtm.tab.c
- sed -e 's/yy/zz/g' posixtm.tab.c > tposixtm.c
- mv tposixtm.c posixtm.c
- rm -f posixtm.tab.c
+## Process this file with automake to produce Makefile.in -*-Makefile-*-
+
+AUTOMAKE_OPTIONS = ../src/ansi2knr
+
+noinst_LIBRARIES = libfetish.a
+
+INCLUDES = -I.. -I$(srcdir) -I../intl
+DEFS = -DLIBDIR=\"$(libdir)\" @DEFS@
+
+libfetish_a_SOURCES = \
+ getdate.y posixtm.c addext.c argmatch.c backupfile.c basename.c \
+ canon-host.c closeout.c diacrit.c dirname.c exclude.c filemode.c \
+ full-write.c getopt.c getopt1.c getstr.c getugroups.c hard-locale.c hash.c \
+ human.c idcache.c isdir.c linebuffer.c localcharset.c long-options.c \
+ makepath.c md5.c memcasecmp.c memcoll.c modechange.c path-concat.c \
+ quotearg.c readtokens.c safe-read.c same.c save-cwd.c \
+ savedir.c stripslash.c unicodeio.c userspec.c version-etc.c xgetcwd.c \
+ xgethostname.c xmalloc.c xstrdup.c xstrtod.c xstrtol.c xstrtoul.c \
+ xstrtoumax.c yesno.c
+
+libfetish_a_LIBADD = @LIBOBJS@ @ALLOCA@
+libfetish_a_DEPENDENCIES = $(libfetish_a_LIBADD)
+
+noinst_HEADERS = \
+ argmatch.h backupfile.h bumpalloc.h closeout.h diacrit.h dirname.h error.h \
+ exclude.h filemode.h fnmatch.h fsusage.h getdate.h getline.h getopt.h \
+ getstr.h getpagesize.h group-member.h hard-locale.h hash.h human.h lchown.h \
+ linebuffer.h long-options.h md5.h memcasecmp.h memcoll.h \
+ makepath.h modechange.h mountlist.h nanosleep.h obstack.h \
+ path-concat.h pathmax.h posixtm.h quotearg.h readtokens.h \
+ readutmp.h regex.h safe-read.h same.h save-cwd.h savedir.h \
+ strverscmp.h unicodeio.h version-etc.h xalloc.h xstrtod.h xstrtol.h
+
+BUILT_SOURCES = getdate.c lstat.c stat.c
+MAINTAINERCLEANFILES = $(BUILT_SOURCES)
+DISTCLEANFILES = lstat.c stat.c
+
+EXTRA_DIST = xstat.in config.charset ref-add.sin ref-del.sin
+lstat.c: xstat.in
+ sed \
+ -e '/@IGNORE@/d' \
+ -e 's/@xstat@/lstat/g' \
+ -e '/_LSTAT_ONLY@/d' \
+ -e '/@BEGIN_STAT_ONLY@/,/@END_STAT_ONLY@/d' \
+ $(srcdir)/xstat.in > $@-t
+ mv $@-t $@
+
+stat.c: xstat.in
+ sed \
+ -e '/@IGNORE@/d' \
+ -e 's/@xstat@/stat/g' \
+ -e '/_STAT_ONLY@/d' \
+ -e '/@BEGIN_LSTAT_ONLY@/,/@END_LSTAT_ONLY@/d' \
+ $(srcdir)/xstat.in > $@-t
+ mv $@-t $@
+
+
+# The following is needed in order to install a simple file in $(libdir)
+# which is shared with other installed packages. We use a list of referencing
+# packages so that "make uninstall" will remove the file if and only if it
+# is not used by another installed package.
+# On systems with glibc-2.1 or newer, the file is redundant, therefore we
+# avoid installing it.
+
+all-local: charset.alias ref-add.sed ref-del.sed lstat.c stat.c
+
+charset_alias = $(DESTDIR)$(libdir)/charset.alias
+charset_tmp = $(DESTDIR)$(libdir)/charset.tmp
+install-exec-local: all-local
+ $(mkinstalldirs) $(DESTDIR)$(libdir)
+ if test -f $(charset_alias); then \
+ sed -f ref-add.sed $(charset_alias) > $(charset_tmp) ; \
+ $(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \
+ rm -f $(charset_tmp) ; \
+ else \
+ if test @GLIBC21@ = no; then \
+ sed -f ref-add.sed charset.alias > $(charset_tmp) ; \
+ $(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \
+ rm -f $(charset_tmp) ; \
+ fi ; \
+ fi
+
+uninstall-local: all-local
+ if test -f $(charset_alias); then \
+ sed -f ref-del.sed $(charset_alias) > $(charset_tmp); \
+ if grep '^# Packages using this file: $$' $(charset_tmp) \
+ > /dev/null; then \
+ rm -f $(charset_alias); \
+ else \
+ $(INSTALL_DATA) $(charset_tmp) $(charset_alias); \
+ fi; \
+ rm -f $(charset_tmp); \
+ fi
+
+charset.alias: config.charset
+ $(SHELL) $(srcdir)/config.charset '@host@' > t-$@
+ mv t-$@ $@
+
+SUFFIXES = .sed .sin
+.sin.sed:
+ sed -e '/^#/d' -e 's/@''PACKAGE''@/@PACKAGE@/g' $< > $@-t
+ mv $@-t $@
+
+CLEANFILES = charset.alias ref-add.sed ref-del.sed
projects / gnulib.git / blobdiff