Fix problem with getdate on mingw32 reported by Simon Josefsson
[gnulib.git] / lib / getdate.y
index b35130b..1deec51 100644 (file)
@@ -1,11 +1,13 @@
 %{
 /* Parse a string into an internal time stamp.
-   Copyright (C) 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
 
-   This program is free software; you can redistribute it and/or modify
+   Copyright (C) 1999, 2000, 2002, 2003, 2004, 2005, 2006, 2007 Free Software
+   Foundation, Inc.
+
+   This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -13,8 +15,7 @@
    GNU General Public License for more details.
 
    You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 /* Originally written by Steven M. Bellovin <smb@research.att.com> while
    at the University of North Carolina at Chapel Hill.  Later tweaked by
    <rsalz@bbn.com> and Jim Berets <jberets@bbn.com> in August, 1990.
 
    Modified by Paul Eggert <eggert@twinsun.com> in August 1999 to do
-   the right thing about local DST.  Unlike previous versions, this
-   version is reentrant.  */
+   the right thing about local DST.  Also modified by Paul Eggert
+   <eggert@cs.ucla.edu> in February 2004 to support
+   nanosecond-resolution time stamps, and in October 2004 to support
+   TZ strings in dates.  */
 
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
+/* FIXME: Check for arithmetic overflow in all cases, not just
+   some of them.  */
+
+#include <config.h>
+
+#include "getdate.h"
+
+#include "intprops.h"
+#include "timespec.h"
+#include "verify.h"
 
-#include <alloca.h>
+/* There's no need to extend the stack, so there's no need to involve
+   alloca.  */
+#define YYSTACK_USE_ALLOCA 0
+
+/* Tell Bison how much stack space is needed.  20 should be plenty for
+   this grammar, which is not right recursive.  Beware setting it too
+   high, since that might cause problems on machines whose
+   implementations have lame stack-overflow checking.  */
+#define YYMAXDEPTH 20
+#define YYINITDEPTH YYMAXDEPTH
 
 /* Since the code of getdate.y is not included in the Emacs executable
    itself, there is no need to #define static in this file.  Even if
 #endif
 
 #include <ctype.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
 
-#if HAVE_STDLIB_H
-# include <stdlib.h> /* for `free'; used by Bison 1.27 */
-#endif
-
-#if STDC_HEADERS || (! defined isascii && ! HAVE_ISASCII)
-# define IN_CTYPE_DOMAIN(c) 1
-#else
-# define IN_CTYPE_DOMAIN(c) isascii (c)
-#endif
+#include "xalloc.h"
 
-#define ISSPACE(c) (IN_CTYPE_DOMAIN (c) && isspace (c))
-#define ISALPHA(c) (IN_CTYPE_DOMAIN (c) && isalpha (c))
-#define ISLOWER(c) (IN_CTYPE_DOMAIN (c) && islower (c))
-#define ISDIGIT_LOCALE(c) (IN_CTYPE_DOMAIN (c) && isdigit (c))
 
-/* ISDIGIT differs from ISDIGIT_LOCALE, as follows:
-   - Its arg may be any int or unsigned int; it need not be an unsigned char.
-   - It's guaranteed to evaluate its argument exactly once.
+/* ISDIGIT differs from isdigit, as follows:
+   - Its arg may be any int or unsigned int; it need not be an unsigned char
+     or EOF.
    - It's typically faster.
    POSIX says that only '0' through '9' are digits.  Prefer ISDIGIT to
-   ISDIGIT_LOCALE unless it's important to use the locale's definition
+   isdigit unless it's important to use the locale's definition
    of `digit' even when the host does not conform to POSIX.  */
-#define ISDIGIT(c) ((unsigned) (c) - '0' <= 9)
+#define ISDIGIT(c) ((unsigned int) (c) - '0' <= 9)
 
-#if STDC_HEADERS || HAVE_STRING_H
-# include <string.h>
-#endif
-
-#if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) || __STRICT_ANSI__
-# define __attribute__(x)
+#ifndef __attribute__
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) || __STRICT_ANSI__
+#  define __attribute__(x)
+# endif
 #endif
 
 #ifndef ATTRIBUTE_UNUSED
 # define ATTRIBUTE_UNUSED __attribute__ ((__unused__))
 #endif
 
+/* Shift A right by B bits portably, by dividing A by 2**B and
+   truncating towards minus infinity.  A and B should be free of side
+   effects, and B should be in the range 0 <= B <= INT_BITS - 2, where
+   INT_BITS is the number of useful bits in an int.  GNU code can
+   assume that INT_BITS is at least 32.
+
+   ISO C99 says that A >> B is implementation-defined if A < 0.  Some
+   implementations (e.g., UNICOS 9.0 on a Cray Y-MP EL) don't shift
+   right in the usual way when A < 0, so SHR falls back on division if
+   ordinary A >> B doesn't seem to be the usual signed shift.  */
+#define SHR(a, b)      \
+  (-1 >> 1 == -1       \
+   ? (a) >> (b)                \
+   : (a) / (1 << (b)) - ((a) % (1 << (b)) < 0))
+
 #define EPOCH_YEAR 1970
 #define TM_YEAR_BASE 1900
 
 #define HOUR(x) ((x) * 60)
 
+/* Lots of this code assumes time_t and time_t-like values fit into
+   long int.  It also assumes that signed integer overflow silently
+   wraps around, but there's no portable way to check for that at
+   compile-time.  */
+verify (TYPE_IS_INTEGER (time_t));
+verify (LONG_MIN <= TYPE_MINIMUM (time_t) && TYPE_MAXIMUM (time_t) <= LONG_MAX);
+
 /* An integer value, and the number of digits in its textual
    representation.  */
 typedef struct
 {
-  int value;
-  int digits;
+  bool negative;
+  long int value;
+  size_t digits;
 } textint;
 
 /* An entry in the lexical lookup table.  */
@@ -103,6 +135,27 @@ typedef struct
 /* Meridian: am, pm, or 24-hour style.  */
 enum { MERam, MERpm, MER24 };
 
+enum { BILLION = 1000000000, LOG10_BILLION = 9 };
+
+/* Relative times.  */
+typedef struct
+{
+  /* Relative year, month, day, hour, minutes, seconds, and nanoseconds.  */
+  long int year;
+  long int month;
+  long int day;
+  long int hour;
+  long int minutes;
+  long int seconds;
+  long int ns;
+} relative_time;
+
+#if HAVE_COMPOUND_LITERALS
+# define RELATIVE_TIME_0 ((relative_time) { 0, 0, 0, 0, 0, 0, 0 })
+#else
+static relative_time const RELATIVE_TIME_0;
+#endif
+
 /* Information passed to and from the parser.  */
 typedef struct
 {
@@ -110,7 +163,7 @@ typedef struct
   const char *input;
 
   /* N, if this is the Nth Tuesday.  */
-  int day_ordinal;
+  long int day_ordinal;
 
   /* Day of week; Sunday is 0.  */
   int day_number;
@@ -119,172 +172,259 @@ typedef struct
   int local_isdst;
 
   /* Time zone, in minutes east of UTC.  */
-  int time_zone;
+  long int time_zone;
 
   /* Style used for time.  */
   int meridian;
 
-  /* Gregorian year, month, day, hour, minutes, and seconds.  */
+  /* Gregorian year, month, day, hour, minutes, seconds, and nanoseconds.  */
   textint year;
-  int month;
-  int day;
-  int hour;
-  int minutes;
-  int seconds;
-
-  /* Relative year, month, day, hour, minutes, and seconds.  */
-  int rel_year;
-  int rel_month;
-  int rel_day;
-  int rel_hour;
-  int rel_minutes;
-  int rel_seconds;
-
-  /* Counts of nonterminals of various flavors parsed so far.  */
-  int dates_seen;
-  int days_seen;
-  int local_zones_seen;
-  int rels_seen;
-  int times_seen;
-  int zones_seen;
+  long int month;
+  long int day;
+  long int hour;
+  long int minutes;
+  struct timespec seconds; /* includes nanoseconds */
+
+  /* Relative year, month, day, hour, minutes, seconds, and nanoseconds.  */
+  relative_time rel;
+
+  /* Presence or counts of nonterminals of various flavors parsed so far.  */
+  bool timespec_seen;
+  bool rels_seen;
+  size_t dates_seen;
+  size_t days_seen;
+  size_t local_zones_seen;
+  size_t dsts_seen;
+  size_t times_seen;
+  size_t zones_seen;
 
   /* Table of local time zone abbrevations, terminated by a null entry.  */
   table local_time_zone_table[3];
 } parser_control;
 
-#define PC (* (parser_control *) parm)
-#define YYLEX_PARAM parm
-#define YYPARSE_PARAM parm
+union YYSTYPE;
+static int yylex (union YYSTYPE *, parser_control *);
+static int yyerror (parser_control const *, char const *);
+static long int time_zone_hhmm (textint, long int);
 
-static int yyerror ();
-static int yylex ();
+/* Extract into *PC any date and time info from a string of digits
+   of the form e.g., YYYYMMDD, YYMMDD, HHMM, HH (and sometimes YYY,
+   YYYY, ...).  */
+static void
+digits_to_date_time (parser_control *pc, textint text_int)
+{
+  if (pc->dates_seen && ! pc->year.digits
+      && ! pc->rels_seen && (pc->times_seen || 2 < text_int.digits))
+    pc->year = text_int;
+  else
+    {
+      if (4 < text_int.digits)
+       {
+         pc->dates_seen++;
+         pc->day = text_int.value % 100;
+         pc->month = (text_int.value / 100) % 100;
+         pc->year.value = text_int.value / 10000;
+         pc->year.digits = text_int.digits - 4;
+       }
+      else
+       {
+         pc->times_seen++;
+         if (text_int.digits <= 2)
+           {
+             pc->hour = text_int.value;
+             pc->minutes = 0;
+           }
+         else
+           {
+             pc->hour = text_int.value / 100;
+             pc->minutes = text_int.value % 100;
+           }
+         pc->seconds.tv_sec = 0;
+         pc->seconds.tv_nsec = 0;
+         pc->meridian = MER24;
+       }
+    }
+}
 
 %}
 
-/* We want a reentrant parser.  */
-%pure_parser
+/* We want a reentrant parser, even if the TZ manipulation and the calls to
+   localtime and gmtime are not reentrant.  */
+%pure-parser
+%parse-param { parser_control *pc }
+%lex-param { parser_control *pc }
 
-/* This grammar has 13 shift/reduce conflicts. */
-%expect 13
+/* This grammar has 20 shift/reduce conflicts. */
+%expect 20
 
 %union
 {
-  int intval;
+  long int intval;
   textint textintval;
+  struct timespec timespec;
+  relative_time rel;
 }
 
 %token tAGO tDST
 
-%token <intval> tDAY tDAY_UNIT tDAYZONE tHOUR_UNIT tLOCAL_ZONE tMERIDIAN
-%token <intval> tMINUTE_UNIT tMONTH tMONTH_UNIT tSEC_UNIT tYEAR_UNIT tZONE
+%token tYEAR_UNIT tMONTH_UNIT tHOUR_UNIT tMINUTE_UNIT tSEC_UNIT
+%token <intval> tDAY_UNIT
+
+%token <intval> tDAY tDAYZONE tLOCAL_ZONE tMERIDIAN
+%token <intval> tMONTH tORDINAL tZONE
 
 %token <textintval> tSNUMBER tUNUMBER
+%token <timespec> tSDECIMAL_NUMBER tUDECIMAL_NUMBER
+
+%type <intval> o_colon_minutes o_merid
+%type <timespec> seconds signed_seconds unsigned_seconds
 
-%type <intval> o_merid
+%type <rel> relunit relunit_snumber
 
 %%
 
 spec:
+    timespec
+  | items
+  ;
+
+timespec:
+    '@' seconds
+      {
+       pc->seconds = $2;
+       pc->timespec_seen = true;
+      }
+  ;
+
+items:
     /* empty */
-  | spec item
+  | items item
   ;
 
 item:
     time
-      { PC.times_seen++; }
+      { pc->times_seen++; }
   | local_zone
-      { PC.local_zones_seen++; }
+      { pc->local_zones_seen++; }
   | zone
-      { PC.zones_seen++; }
+      { pc->zones_seen++; }
   | date
-      { PC.dates_seen++; }
+      { pc->dates_seen++; }
   | day
-      { PC.days_seen++; }
+      { pc->days_seen++; }
   | rel
-      { PC.rels_seen++; }
+      { pc->rels_seen = true; }
   | number
+  | hybrid
   ;
 
 time:
     tUNUMBER tMERIDIAN
       {
-       PC.hour = $1.value;
-       PC.minutes = 0;
-       PC.seconds = 0;
-       PC.meridian = $2;
+       pc->hour = $1.value;
+       pc->minutes = 0;
+       pc->seconds.tv_sec = 0;
+       pc->seconds.tv_nsec = 0;
+       pc->meridian = $2;
       }
   | tUNUMBER ':' tUNUMBER o_merid
       {
-       PC.hour = $1.value;
-       PC.minutes = $3.value;
-       PC.seconds = 0;
-       PC.meridian = $4;
+       pc->hour = $1.value;
+       pc->minutes = $3.value;
+       pc->seconds.tv_sec = 0;
+       pc->seconds.tv_nsec = 0;
+       pc->meridian = $4;
       }
-  | tUNUMBER ':' tUNUMBER tSNUMBER
+  | tUNUMBER ':' tUNUMBER tSNUMBER o_colon_minutes
       {
-       PC.hour = $1.value;
-       PC.minutes = $3.value;
-       PC.meridian = MER24;
-       PC.zones_seen++;
-       PC.time_zone = $4.value % 100 + ($4.value / 100) * 60;
+       pc->hour = $1.value;
+       pc->minutes = $3.value;
+       pc->seconds.tv_sec = 0;
+       pc->seconds.tv_nsec = 0;
+       pc->meridian = MER24;
+       pc->zones_seen++;
+       pc->time_zone = time_zone_hhmm ($4, $5);
       }
-  | tUNUMBER ':' tUNUMBER ':' tUNUMBER o_merid
+  | tUNUMBER ':' tUNUMBER ':' unsigned_seconds o_merid
       {
-       PC.hour = $1.value;
-       PC.minutes = $3.value;
-       PC.seconds = $5.value;
-       PC.meridian = $6;
+       pc->hour = $1.value;
+       pc->minutes = $3.value;
+       pc->seconds = $5;
+       pc->meridian = $6;
       }
-  | tUNUMBER ':' tUNUMBER ':' tUNUMBER tSNUMBER
+  | tUNUMBER ':' tUNUMBER ':' unsigned_seconds tSNUMBER o_colon_minutes
       {
-       PC.hour = $1.value;
-       PC.minutes = $3.value;
-       PC.seconds = $5.value;
-       PC.meridian = MER24;
-       PC.zones_seen++;
-       PC.time_zone = $6.value % 100 + ($6.value / 100) * 60;
+       pc->hour = $1.value;
+       pc->minutes = $3.value;
+       pc->seconds = $5;
+       pc->meridian = MER24;
+       pc->zones_seen++;
+       pc->time_zone = time_zone_hhmm ($6, $7);
       }
   ;
 
 local_zone:
     tLOCAL_ZONE
-      { PC.local_isdst = $1; }
+      {
+       pc->local_isdst = $1;
+       pc->dsts_seen += (0 < $1);
+      }
   | tLOCAL_ZONE tDST
-      { PC.local_isdst = $1 < 0 ? 1 : $1 + 1; }
+      {
+       pc->local_isdst = 1;
+       pc->dsts_seen += (0 < $1) + 1;
+      }
   ;
 
 zone:
     tZONE
-      { PC.time_zone = $1; }
+      { pc->time_zone = $1; }
+  | tZONE relunit_snumber
+      { pc->time_zone = $1;
+       pc->rel.ns += $2.ns;
+       pc->rel.seconds += $2.seconds;
+       pc->rel.minutes += $2.minutes;
+       pc->rel.hour += $2.hour;
+       pc->rel.day += $2.day;
+       pc->rel.month += $2.month;
+       pc->rel.year += $2.year;
+        pc->rels_seen = true; }
+  | tZONE tSNUMBER o_colon_minutes
+      { pc->time_zone = $1 + time_zone_hhmm ($2, $3); }
   | tDAYZONE
-      { PC.time_zone = $1 + 60; }
+      { pc->time_zone = $1 + 60; }
   | tZONE tDST
-      { PC.time_zone = $1 + 60; }
+      { pc->time_zone = $1 + 60; }
   ;
 
 day:
     tDAY
       {
-       PC.day_ordinal = 1;
-       PC.day_number = $1;
+       pc->day_ordinal = 1;
+       pc->day_number = $1;
       }
   | tDAY ','
       {
-       PC.day_ordinal = 1;
-       PC.day_number = $1;
+       pc->day_ordinal = 1;
+       pc->day_number = $1;
+      }
+  | tORDINAL tDAY
+      {
+       pc->day_ordinal = $1;
+       pc->day_number = $2;
       }
   | tUNUMBER tDAY
       {
-       PC.day_ordinal = $1.value;
-       PC.day_number = $2;
+       pc->day_ordinal = $1.value;
+       pc->day_number = $2;
       }
   ;
 
 date:
     tUNUMBER '/' tUNUMBER
       {
-       PC.month = $1.value;
-       PC.day = $3.value;
+       pc->month = $1.value;
+       pc->day = $3.value;
       }
   | tUNUMBER '/' tUNUMBER '/' tUNUMBER
       {
@@ -295,152 +435,189 @@ date:
           you want portability, use the ISO 8601 format.  */
        if (4 <= $1.digits)
          {
-           PC.year = $1;
-           PC.month = $3.value;
-           PC.day = $5.value;
+           pc->year = $1;
+           pc->month = $3.value;
+           pc->day = $5.value;
          }
        else
          {
-           PC.month = $1.value;
-           PC.day = $3.value;
-           PC.year = $5;
+           pc->month = $1.value;
+           pc->day = $3.value;
+           pc->year = $5;
          }
       }
   | tUNUMBER tSNUMBER tSNUMBER
       {
        /* ISO 8601 format.  YYYY-MM-DD.  */
-       PC.year = $1;
-       PC.month = -$2.value;
-       PC.day = -$3.value;
+       pc->year = $1;
+       pc->month = -$2.value;
+       pc->day = -$3.value;
       }
   | tUNUMBER tMONTH tSNUMBER
       {
        /* e.g. 17-JUN-1992.  */
-       PC.day = $1.value;
-       PC.month = $2;
-       PC.year.value = -$3.value;
-       PC.year.digits = $3.digits;
+       pc->day = $1.value;
+       pc->month = $2;
+       pc->year.value = -$3.value;
+       pc->year.digits = $3.digits;
       }
   | tMONTH tSNUMBER tSNUMBER
       {
        /* e.g. JUN-17-1992.  */
-       PC.month = $1;
-       PC.day = -$2.value;
-       PC.year.value = -$3.value;
-       PC.year.digits = $3.digits;
+       pc->month = $1;
+       pc->day = -$2.value;
+       pc->year.value = -$3.value;
+       pc->year.digits = $3.digits;
       }
   | tMONTH tUNUMBER
       {
-       PC.month = $1;
-       PC.day = $2.value;
+       pc->month = $1;
+       pc->day = $2.value;
       }
   | tMONTH tUNUMBER ',' tUNUMBER
       {
-       PC.month = $1;
-       PC.day = $2.value;
-       PC.year = $4;
+       pc->month = $1;
+       pc->day = $2.value;
+       pc->year = $4;
       }
   | tUNUMBER tMONTH
       {
-       PC.day = $1.value;
-       PC.month = $2;
+       pc->day = $1.value;
+       pc->month = $2;
       }
   | tUNUMBER tMONTH tUNUMBER
       {
-       PC.day = $1.value;
-       PC.month = $2;
-       PC.year = $3;
+       pc->day = $1.value;
+       pc->month = $2;
+       pc->year = $3;
       }
   ;
 
 rel:
     relunit tAGO
       {
-       PC.rel_seconds = -PC.rel_seconds;
-       PC.rel_minutes = -PC.rel_minutes;
-       PC.rel_hour = -PC.rel_hour;
-       PC.rel_day = -PC.rel_day;
-       PC.rel_month = -PC.rel_month;
-       PC.rel_year = -PC.rel_year;
+       pc->rel.ns -= $1.ns;
+       pc->rel.seconds -= $1.seconds;
+       pc->rel.minutes -= $1.minutes;
+       pc->rel.hour -= $1.hour;
+       pc->rel.day -= $1.day;
+       pc->rel.month -= $1.month;
+       pc->rel.year -= $1.year;
       }
   | relunit
+      {
+       pc->rel.ns += $1.ns;
+       pc->rel.seconds += $1.seconds;
+       pc->rel.minutes += $1.minutes;
+       pc->rel.hour += $1.hour;
+       pc->rel.day += $1.day;
+       pc->rel.month += $1.month;
+       pc->rel.year += $1.year;
+      }
   ;
 
 relunit:
-    tUNUMBER tYEAR_UNIT
-      { PC.rel_year += $1.value * $2; }
-  | tSNUMBER tYEAR_UNIT
-      { PC.rel_year += $1.value * $2; }
+    tORDINAL tYEAR_UNIT
+      { $$ = RELATIVE_TIME_0; $$.year = $1; }
+  | tUNUMBER tYEAR_UNIT
+      { $$ = RELATIVE_TIME_0; $$.year = $1.value; }
   | tYEAR_UNIT
-      { PC.rel_year += $1; }
+      { $$ = RELATIVE_TIME_0; $$.year = 1; }
+  | tORDINAL tMONTH_UNIT
+      { $$ = RELATIVE_TIME_0; $$.month = $1; }
   | tUNUMBER tMONTH_UNIT
-      { PC.rel_month += $1.value * $2; }
-  | tSNUMBER tMONTH_UNIT
-      { PC.rel_month += $1.value * $2; }
+      { $$ = RELATIVE_TIME_0; $$.month = $1.value; }
   | tMONTH_UNIT
-      { PC.rel_month += $1; }
+      { $$ = RELATIVE_TIME_0; $$.month = 1; }
+  | tORDINAL tDAY_UNIT
+      { $$ = RELATIVE_TIME_0; $$.day = $1 * $2; }
   | tUNUMBER tDAY_UNIT
-      { PC.rel_day += $1.value * $2; }
-  | tSNUMBER tDAY_UNIT
-      { PC.rel_day += $1.value * $2; }
+      { $$ = RELATIVE_TIME_0; $$.day = $1.value * $2; }
   | tDAY_UNIT
-      { PC.rel_day += $1; }
+      { $$ = RELATIVE_TIME_0; $$.day = $1; }
+  | tORDINAL tHOUR_UNIT
+      { $$ = RELATIVE_TIME_0; $$.hour = $1; }
   | tUNUMBER tHOUR_UNIT
-      { PC.rel_hour += $1.value * $2; }
-  | tSNUMBER tHOUR_UNIT
-      { PC.rel_hour += $1.value * $2; }
+      { $$ = RELATIVE_TIME_0; $$.hour = $1.value; }
   | tHOUR_UNIT
-      { PC.rel_hour += $1; }
+      { $$ = RELATIVE_TIME_0; $$.hour = 1; }
+  | tORDINAL tMINUTE_UNIT
+      { $$ = RELATIVE_TIME_0; $$.minutes = $1; }
   | tUNUMBER tMINUTE_UNIT
-      { PC.rel_minutes += $1.value * $2; }
-  | tSNUMBER tMINUTE_UNIT
-      { PC.rel_minutes += $1.value * $2; }
+      { $$ = RELATIVE_TIME_0; $$.minutes = $1.value; }
   | tMINUTE_UNIT
-      { PC.rel_minutes += $1; }
+      { $$ = RELATIVE_TIME_0; $$.minutes = 1; }
+  | tORDINAL tSEC_UNIT
+      { $$ = RELATIVE_TIME_0; $$.seconds = $1; }
   | tUNUMBER tSEC_UNIT
-      { PC.rel_seconds += $1.value * $2; }
-  | tSNUMBER tSEC_UNIT
-      { PC.rel_seconds += $1.value * $2; }
+      { $$ = RELATIVE_TIME_0; $$.seconds = $1.value; }
+  | tSDECIMAL_NUMBER tSEC_UNIT
+      { $$ = RELATIVE_TIME_0; $$.seconds = $1.tv_sec; $$.ns = $1.tv_nsec; }
+  | tUDECIMAL_NUMBER tSEC_UNIT
+      { $$ = RELATIVE_TIME_0; $$.seconds = $1.tv_sec; $$.ns = $1.tv_nsec; }
   | tSEC_UNIT
-      { PC.rel_seconds += $1; }
+      { $$ = RELATIVE_TIME_0; $$.seconds = 1; }
+  | relunit_snumber
+  ;
+
+relunit_snumber:
+    tSNUMBER tYEAR_UNIT
+      { $$ = RELATIVE_TIME_0; $$.year = $1.value; }
+  | tSNUMBER tMONTH_UNIT
+      { $$ = RELATIVE_TIME_0; $$.month = $1.value; }
+  | tSNUMBER tDAY_UNIT
+      { $$ = RELATIVE_TIME_0; $$.day = $1.value * $2; }
+  | tSNUMBER tHOUR_UNIT
+      { $$ = RELATIVE_TIME_0; $$.hour = $1.value; }
+  | tSNUMBER tMINUTE_UNIT
+      { $$ = RELATIVE_TIME_0; $$.minutes = $1.value; }
+  | tSNUMBER tSEC_UNIT
+      { $$ = RELATIVE_TIME_0; $$.seconds = $1.value; }
+  ;
+
+seconds: signed_seconds | unsigned_seconds;
+
+signed_seconds:
+    tSDECIMAL_NUMBER
+  | tSNUMBER
+      { $$.tv_sec = $1.value; $$.tv_nsec = 0; }
+  ;
+
+unsigned_seconds:
+    tUDECIMAL_NUMBER
+  | tUNUMBER
+      { $$.tv_sec = $1.value; $$.tv_nsec = 0; }
   ;
 
 number:
     tUNUMBER
+      { digits_to_date_time (pc, $1); }
+  ;
+
+hybrid:
+    tUNUMBER relunit_snumber
       {
-       if (PC.dates_seen
-           && ! PC.rels_seen && (PC.times_seen || 2 < $1.digits))
-         PC.year = $1;
-       else
-         {
-           if (4 < $1.digits)
-             {
-               PC.dates_seen++;
-               PC.day = $1.value % 100;
-               PC.month = ($1.value / 100) % 100;
-               PC.year.value = $1.value / 10000;
-               PC.year.digits = $1.digits - 4;
-             }
-           else
-             {
-               PC.times_seen++;
-               if ($1.digits <= 2)
-                 {
-                   PC.hour = $1.value;
-                   PC.minutes = 0;
-                 }
-               else
-                 {
-                   PC.hour = $1.value / 100;
-                   PC.minutes = $1.value % 100;
-                 }
-               PC.seconds = 0;
-               PC.meridian = MER24;
-             }
-         }
+       /* Hybrid all-digit and relative offset, so that we accept e.g.,
+          "YYYYMMDD +N days" as well as "YYYYMMDD N days".  */
+       digits_to_date_time (pc, $1);
+       pc->rel.ns += $2.ns;
+       pc->rel.seconds += $2.seconds;
+       pc->rel.minutes += $2.minutes;
+       pc->rel.hour += $2.hour;
+       pc->rel.day += $2.day;
+       pc->rel.month += $2.month;
+       pc->rel.year += $2.year;
+       pc->rels_seen = true;
       }
   ;
 
+o_colon_minutes:
+    /* empty */
+      { $$ = -1; }
+  | ':' tUNUMBER
+      { $$ = $2.value; }
+  ;
+
 o_merid:
     /* empty */
       { $$ = MER24; }
@@ -450,29 +627,13 @@ o_merid:
 
 %%
 
-/* Include this file down here because bison inserts code above which
-   may define-away `const'.  We want the prototype for get_date to have
-   the same signature as the function definition.  */
-#include "getdate.h"
-#include "unlocked-io.h"
-
-#ifndef gmtime
-struct tm *gmtime ();
-#endif
-#ifndef localtime
-struct tm *localtime ();
-#endif
-#ifndef mktime
-time_t mktime ();
-#endif
-
 static table const meridian_table[] =
 {
   { "AM",   tMERIDIAN, MERam },
   { "A.M.", tMERIDIAN, MERam },
   { "PM",   tMERIDIAN, MERpm },
   { "P.M.", tMERIDIAN, MERpm },
-  { 0, 0, 0 }
+  { NULL, 0, 0 }
 };
 
 static table const dst_table[] =
@@ -506,7 +667,7 @@ static table const month_and_day_table[] =
   { "THURS",   tDAY,    4 },
   { "FRIDAY",  tDAY,    5 },
   { "SATURDAY",        tDAY,    6 },
-  { 0, 0, 0 }
+  { NULL, 0, 0 }
 };
 
 static table const time_units_table[] =
@@ -521,33 +682,44 @@ static table const time_units_table[] =
   { "MIN",     tMINUTE_UNIT,    1 },
   { "SECOND",  tSEC_UNIT,       1 },
   { "SEC",     tSEC_UNIT,       1 },
-  { 0, 0, 0 }
+  { NULL, 0, 0 }
 };
 
 /* Assorted relative-time words. */
 static table const relative_time_table[] =
 {
-  { "TOMORROW",        tMINUTE_UNIT,   24 * 60 },
-  { "YESTERDAY",tMINUTE_UNIT,  - (24 * 60) },
-  { "TODAY",   tMINUTE_UNIT,    0 },
-  { "NOW",     tMINUTE_UNIT,    0 },
-  { "LAST",    tUNUMBER,       -1 },
-  { "THIS",    tUNUMBER,        0 },
-  { "NEXT",    tUNUMBER,        1 },
-  { "FIRST",   tUNUMBER,        1 },
-/*{ "SECOND",  tUNUMBER,        2 }, */
-  { "THIRD",   tUNUMBER,        3 },
-  { "FOURTH",  tUNUMBER,        4 },
-  { "FIFTH",   tUNUMBER,        5 },
-  { "SIXTH",   tUNUMBER,        6 },
-  { "SEVENTH", tUNUMBER,        7 },
-  { "EIGHTH",  tUNUMBER,        8 },
-  { "NINTH",   tUNUMBER,        9 },
-  { "TENTH",   tUNUMBER,       10 },
-  { "ELEVENTH",        tUNUMBER,       11 },
-  { "TWELFTH", tUNUMBER,       12 },
+  { "TOMORROW",        tDAY_UNIT,       1 },
+  { "YESTERDAY",tDAY_UNIT,     -1 },
+  { "TODAY",   tDAY_UNIT,       0 },
+  { "NOW",     tDAY_UNIT,       0 },
+  { "LAST",    tORDINAL,       -1 },
+  { "THIS",    tORDINAL,        0 },
+  { "NEXT",    tORDINAL,        1 },
+  { "FIRST",   tORDINAL,        1 },
+/*{ "SECOND",  tORDINAL,        2 }, */
+  { "THIRD",   tORDINAL,        3 },
+  { "FOURTH",  tORDINAL,        4 },
+  { "FIFTH",   tORDINAL,        5 },
+  { "SIXTH",   tORDINAL,        6 },
+  { "SEVENTH", tORDINAL,        7 },
+  { "EIGHTH",  tORDINAL,        8 },
+  { "NINTH",   tORDINAL,        9 },
+  { "TENTH",   tORDINAL,       10 },
+  { "ELEVENTH",        tORDINAL,       11 },
+  { "TWELFTH", tORDINAL,       12 },
   { "AGO",     tAGO,            1 },
-  { 0, 0, 0 }
+  { NULL, 0, 0 }
+};
+
+/* The universal time zone table.  These labels can be used even for
+   time stamps that would not otherwise be valid, e.g., GMT time
+   stamps in London during summer.  */
+static table const universal_time_zone_table[] =
+{
+  { "GMT",     tZONE,     HOUR ( 0) }, /* Greenwich Mean */
+  { "UT",      tZONE,     HOUR ( 0) }, /* Universal (Coordinated) */
+  { "UTC",     tZONE,     HOUR ( 0) },
+  { NULL, 0, 0 }
 };
 
 /* The time zone table.  This table is necessarily incomplete, as time
@@ -557,9 +729,6 @@ static table const relative_time_table[] =
    abbreviations; use numeric abbreviations like `-0500' instead.  */
 static table const time_zone_table[] =
 {
-  { "GMT",     tZONE,     HOUR ( 0) }, /* Greenwich Mean */
-  { "UT",      tZONE,     HOUR ( 0) }, /* Universal (Coordinated) */
-  { "UTC",     tZONE,     HOUR ( 0) },
   { "WET",     tZONE,     HOUR ( 0) }, /* Western European */
   { "WEST",    tDAYZONE,  HOUR ( 0) }, /* Western European Summer */
   { "BST",     tDAYZONE,  HOUR ( 0) }, /* British Summer */
@@ -607,7 +776,7 @@ static table const time_zone_table[] =
   { "GST",     tZONE,     HOUR (10) }, /* Guam Standard */
   { "NZST",    tZONE,     HOUR (12) }, /* New Zealand Standard */
   { "NZDT",    tDAYZONE,  HOUR (12) }, /* New Zealand Daylight */
-  { 0, 0, 0  }
+  { NULL, 0, 0 }
 };
 
 /* Military time zone table. */
@@ -638,39 +807,50 @@ static table const military_table[] =
   { "X", tZONE,         HOUR (11) },
   { "Y", tZONE,         HOUR (12) },
   { "Z", tZONE,         HOUR ( 0) },
-  { 0, 0, 0 }
+  { NULL, 0, 0 }
 };
 
 \f
 
+/* Convert a time zone expressed as HH:MM into an integer count of
+   minutes.  If MM is negative, then S is of the form HHMM and needs
+   to be picked apart; otherwise, S is of the form HH.  */
+
+static long int
+time_zone_hhmm (textint s, long int mm)
+{
+  if (mm < 0)
+    return (s.value / 100) * 60 + s.value % 100;
+  else
+    return s.value * 60 + (s.negative ? -mm : mm);
+}
+
 static int
-to_hour (int hours, int meridian)
+to_hour (long int hours, int meridian)
 {
   switch (meridian)
     {
+    default: /* Pacify GCC.  */
     case MER24:
       return 0 <= hours && hours < 24 ? hours : -1;
     case MERam:
       return 0 < hours && hours < 12 ? hours : hours == 12 ? 0 : -1;
     case MERpm:
       return 0 < hours && hours < 12 ? hours + 12 : hours == 12 ? 12 : -1;
-    default:
-      abort ();
     }
-  /* NOTREACHED */
 }
 
-static int
+static long int
 to_year (textint textyear)
 {
-  int year = textyear.value;
+  long int year = textyear.value;
 
   if (year < 0)
     year = -year;
 
   /* XPG4 suggests that years 00-68 map to 2000-2068, and
      years 69-99 map to 1969-1999.  */
-  if (textyear.digits == 2)
+  else if (textyear.digits == 2)
     year += year < 69 ? 2000 : 1900;
 
   return year;
@@ -681,7 +861,12 @@ lookup_zone (parser_control const *pc, char const *name)
 {
   table const *tp;
 
-  /* Try local zone abbreviations first; they're more likely to be right.  */
+  for (tp = universal_time_zone_table; tp->name; tp++)
+    if (strcmp (name, tp->name) == 0)
+      return tp;
+
+  /* Try local zone abbreviations before those in time_zone_table, as
+     the local ones are more likely to be right.  */
   for (tp = pc->local_time_zone_table; tp->name; tp++)
     if (strcmp (name, tp->name) == 0)
       return tp;
@@ -690,7 +875,7 @@ lookup_zone (parser_control const *pc, char const *name)
     if (strcmp (name, tp->name) == 0)
       return tp;
 
-  return 0;
+  return NULL;
 }
 
 #if ! HAVE_TM_GMTOFF
@@ -698,22 +883,22 @@ lookup_zone (parser_control const *pc, char const *name)
    measured in seconds, ignoring leap seconds.
    The body of this function is taken directly from the GNU C Library;
    see src/strftime.c.  */
-static int
+static long int
 tm_diff (struct tm const *a, struct tm const *b)
 {
   /* Compute intervening leap days correctly even if year is negative.
-     Take care to avoid int overflow in leap day calculations,
-     but it's OK to assume that A and B are close to each other.  */
-  int a4 = (a->tm_year >> 2) + (TM_YEAR_BASE >> 2) - ! (a->tm_year & 3);
-  int b4 = (b->tm_year >> 2) + (TM_YEAR_BASE >> 2) - ! (b->tm_year & 3);
+     Take care to avoid int overflow in leap day calculations.  */
+  int a4 = SHR (a->tm_year, 2) + SHR (TM_YEAR_BASE, 2) - ! (a->tm_year & 3);
+  int b4 = SHR (b->tm_year, 2) + SHR (TM_YEAR_BASE, 2) - ! (b->tm_year & 3);
   int a100 = a4 / 25 - (a4 % 25 < 0);
   int b100 = b4 / 25 - (b4 % 25 < 0);
-  int a400 = a100 >> 2;
-  int b400 = b100 >> 2;
+  int a400 = SHR (a100, 2);
+  int b400 = SHR (b100, 2);
   int intervening_leap_days = (a4 - b4) - (a100 - b100) + (a400 - b400);
-  int years = a->tm_year - b->tm_year;
-  int days = (365 * years + intervening_leap_days
-             + (a->tm_yday - b->tm_yday));
+  long int ayear = a->tm_year;
+  long int years = ayear - b->tm_year;
+  long int days = (365 * years + intervening_leap_days
+                  + (a->tm_yday - b->tm_yday));
   return (60 * (60 * (24 * days + (a->tm_hour - b->tm_hour))
                + (a->tm_min - b->tm_min))
          + (a->tm_sec - b->tm_sec));
@@ -727,13 +912,15 @@ lookup_word (parser_control const *pc, char *word)
   char *q;
   size_t wordlen;
   table const *tp;
-  int i;
-  int abbrev;
+  bool period_found;
+  bool abbrev;
 
   /* Make it uppercase.  */
   for (p = word; *p; p++)
-    if (ISLOWER ((unsigned char) *p))
-      *p = toupper ((unsigned char) *p);
+    {
+      unsigned char ch = *p;
+      *p = toupper (ch);
+    }
 
   for (tp = meridian_table; tp->name; tp++)
     if (strcmp (word, tp->name) == 0)
@@ -778,37 +965,38 @@ lookup_word (parser_control const *pc, char *word)
        return tp;
 
   /* Drop out any periods and try the time zone table again. */
-  for (i = 0, p = q = word; (*p = *q); q++)
+  for (period_found = false, p = q = word; (*p = *q); q++)
     if (*q == '.')
-      i = 1;
+      period_found = true;
     else
       p++;
-  if (i && (tp = lookup_zone (pc, word)))
+  if (period_found && (tp = lookup_zone (pc, word)))
     return tp;
 
-  return 0;
+  return NULL;
 }
 
 static int
 yylex (YYSTYPE *lvalp, parser_control *pc)
 {
   unsigned char c;
-  int count;
+  size_t count;
 
   for (;;)
     {
-      while (c = *pc->input, ISSPACE (c))
+      while (c = *pc->input, isspace (c))
        pc->input++;
 
       if (ISDIGIT (c) || c == '-' || c == '+')
        {
          char const *p;
          int sign;
-         int value;
+         unsigned long int value;
          if (c == '-' || c == '+')
            {
              sign = c == '-' ? -1 : 1;
-             c = *++pc->input;
+             while (c = *++pc->input, isspace (c))
+               continue;
              if (! ISDIGIT (c))
                /* skip the '-' sign */
                continue;
@@ -816,20 +1004,102 @@ yylex (YYSTYPE *lvalp, parser_control *pc)
          else
            sign = 0;
          p = pc->input;
-         value = 0;
-         do
+         for (value = 0; ; value *= 10)
            {
-             value = 10 * value + c - '0';
+             unsigned long int value1 = value + (c - '0');
+             if (value1 < value)
+               return '?';
+             value = value1;
              c = *++p;
+             if (! ISDIGIT (c))
+               break;
+             if (ULONG_MAX / 10 < value)
+               return '?';
+           }
+         if ((c == '.' || c == ',') && ISDIGIT (p[1]))
+           {
+             time_t s;
+             int ns;
+             int digits;
+             unsigned long int value1;
+
+             /* Check for overflow when converting value to time_t.  */
+             if (sign < 0)
+               {
+                 s = - value;
+                 if (0 < s)
+                   return '?';
+                 value1 = -s;
+               }
+             else
+               {
+                 s = value;
+                 if (s < 0)
+                   return '?';
+                 value1 = s;
+               }
+             if (value != value1)
+               return '?';
+
+             /* Accumulate fraction, to ns precision.  */
+             p++;
+             ns = *p++ - '0';
+             for (digits = 2; digits <= LOG10_BILLION; digits++)
+               {
+                 ns *= 10;
+                 if (ISDIGIT (*p))
+                   ns += *p++ - '0';
+               }
+
+             /* Skip excess digits, truncating toward -Infinity.  */
+             if (sign < 0)
+               for (; ISDIGIT (*p); p++)
+                 if (*p != '0')
+                   {
+                     ns++;
+                     break;
+                   }
+             while (ISDIGIT (*p))
+               p++;
+
+             /* Adjust to the timespec convention, which is that
+                tv_nsec is always a positive offset even if tv_sec is
+                negative.  */
+             if (sign < 0 && ns)
+               {
+                 s--;
+                 if (! (s < 0))
+                   return '?';
+                 ns = BILLION - ns;
+               }
+
+             lvalp->timespec.tv_sec = s;
+             lvalp->timespec.tv_nsec = ns;
+             pc->input = p;
+             return sign ? tSDECIMAL_NUMBER : tUDECIMAL_NUMBER;
+           }
+         else
+           {
+             lvalp->textintval.negative = sign < 0;
+             if (sign < 0)
+               {
+                 lvalp->textintval.value = - value;
+                 if (0 < lvalp->textintval.value)
+                   return '?';
+               }
+             else
+               {
+                 lvalp->textintval.value = value;
+                 if (lvalp->textintval.value < 0)
+                   return '?';
+               }
+             lvalp->textintval.digits = p - pc->input;
+             pc->input = p;
+             return sign ? tSNUMBER : tUNUMBER;
            }
-         while (ISDIGIT (c));
-         lvalp->textintval.value = sign < 0 ? -value : value;
-         lvalp->textintval.digits = p - pc->input;
-         pc->input = p;
-         return sign ? tSNUMBER : tUNUMBER;
        }
 
-      if (ISALPHA (c))
+      if (isalpha (c))
        {
          char buff[20];
          char *p = buff;
@@ -841,7 +1111,7 @@ yylex (YYSTYPE *lvalp, parser_control *pc)
                *p++ = c;
              c = *++pc->input;
            }
-         while (ISALPHA (c) || c == '.');
+         while (isalpha (c) || c == '.');
 
          *p = '\0';
          tp = lookup_word (pc, buff);
@@ -864,62 +1134,168 @@ yylex (YYSTYPE *lvalp, parser_control *pc)
          else if (c == ')')
            count--;
        }
-      while (count > 0);
+      while (count != 0);
     }
 }
 
 /* Do nothing if the parser reports an error.  */
 static int
-yyerror (char *s ATTRIBUTE_UNUSED)
+yyerror (parser_control const *pc ATTRIBUTE_UNUSED,
+        char const *s ATTRIBUTE_UNUSED)
 {
   return 0;
 }
 
-/* Parse a date/time string P.  Return the corresponding time_t value,
-   or (time_t) -1 if there is an error.  P can be an incomplete or
-   relative time specification; if so, use *NOW as the basis for the
-   returned time.  */
-time_t
-get_date (const char *p, const time_t *now)
+/* If *TM0 is the old and *TM1 is the new value of a struct tm after
+   passing it to mktime, return true if it's OK that mktime returned T.
+   It's not OK if *TM0 has out-of-range members.  */
+
+static bool
+mktime_ok (struct tm const *tm0, struct tm const *tm1, time_t t)
+{
+  if (t == (time_t) -1)
+    {
+      /* Guard against falsely reporting an error when parsing a time
+        stamp that happens to equal (time_t) -1, on a host that
+        supports such a time stamp.  */
+      tm1 = localtime (&t);
+      if (!tm1)
+       return false;
+    }
+
+  return ! ((tm0->tm_sec ^ tm1->tm_sec)
+           | (tm0->tm_min ^ tm1->tm_min)
+           | (tm0->tm_hour ^ tm1->tm_hour)
+           | (tm0->tm_mday ^ tm1->tm_mday)
+           | (tm0->tm_mon ^ tm1->tm_mon)
+           | (tm0->tm_year ^ tm1->tm_year));
+}
+
+/* A reasonable upper bound for the size of ordinary TZ strings.
+   Use heap allocation if TZ's length exceeds this.  */
+enum { TZBUFSIZE = 100 };
+
+/* Return a copy of TZ, stored in TZBUF if it fits, and heap-allocated
+   otherwise.  */
+static char *
+get_tz (char tzbuf[TZBUFSIZE])
+{
+  char *tz = getenv ("TZ");
+  if (tz)
+    {
+      size_t tzsize = strlen (tz) + 1;
+      tz = (tzsize <= TZBUFSIZE
+           ? memcpy (tzbuf, tz, tzsize)
+           : xmemdup (tz, tzsize));
+    }
+  return tz;
+}
+
+/* Parse a date/time string, storing the resulting time value into *RESULT.
+   The string itself is pointed to by P.  Return true if successful.
+   P can be an incomplete or relative time specification; if so, use
+   *NOW as the basis for the returned time.  */
+bool
+get_date (struct timespec *result, char const *p, struct timespec const *now)
 {
-  time_t Start = now ? *now : time (0);
-  struct tm *tmp = localtime (&Start);
+  time_t Start;
+  long int Start_ns;
+  struct tm const *tmp;
   struct tm tm;
   struct tm tm0;
   parser_control pc;
+  struct timespec gettime_buffer;
+  unsigned char c;
+  bool tz_was_altered = false;
+  char *tz0 = NULL;
+  char tz0buf[TZBUFSIZE];
+  bool ok = true;
+
+  if (! now)
+    {
+      gettime (&gettime_buffer);
+      now = &gettime_buffer;
+    }
+
+  Start = now->tv_sec;
+  Start_ns = now->tv_nsec;
 
+  tmp = localtime (&now->tv_sec);
   if (! tmp)
-    return -1;
+    return false;
+
+  while (c = *p, isspace (c))
+    p++;
+
+  if (strncmp (p, "TZ=\"", 4) == 0)
+    {
+      char const *tzbase = p + 4;
+      size_t tzsize = 1;
+      char const *s;
+
+      for (s = tzbase; *s; s++, tzsize++)
+       if (*s == '\\')
+         {
+           s++;
+           if (! (*s == '\\' || *s == '"'))
+             break;
+         }
+       else if (*s == '"')
+         {
+           char *z;
+           char *tz1;
+           char tz1buf[TZBUFSIZE];
+           bool large_tz = TZBUFSIZE < tzsize;
+           bool setenv_ok;
+           tz0 = get_tz (tz0buf);
+           z = tz1 = large_tz ? xmalloc (tzsize) : tz1buf;
+           for (s = tzbase; *s != '"'; s++)
+             *z++ = *(s += *s == '\\');
+           *z = '\0';
+           setenv_ok = setenv ("TZ", tz1, 1) == 0;
+           if (large_tz)
+             free (tz1);
+           if (!setenv_ok)
+             goto fail;
+           tz_was_altered = true;
+           p = s + 1;
+         }
+    }
+
+  /* As documented, be careful to treat the empty string just like
+     a date string of "0".  Without this, an empty string would be
+     declared invalid when parsed during a DST transition.  */
+  if (*p == '\0')
+    p = "0";
 
   pc.input = p;
-  pc.year.value = tmp->tm_year + TM_YEAR_BASE;
-  pc.year.digits = 4;
+  pc.year.value = tmp->tm_year;
+  pc.year.value += TM_YEAR_BASE;
+  pc.year.digits = 0;
   pc.month = tmp->tm_mon + 1;
   pc.day = tmp->tm_mday;
   pc.hour = tmp->tm_hour;
   pc.minutes = tmp->tm_min;
-  pc.seconds = tmp->tm_sec;
+  pc.seconds.tv_sec = tmp->tm_sec;
+  pc.seconds.tv_nsec = Start_ns;
   tm.tm_isdst = tmp->tm_isdst;
 
   pc.meridian = MER24;
-  pc.rel_seconds = 0;
-  pc.rel_minutes = 0;
-  pc.rel_hour = 0;
-  pc.rel_day = 0;
-  pc.rel_month = 0;
-  pc.rel_year = 0;
+  pc.rel = RELATIVE_TIME_0;
+  pc.timespec_seen = false;
+  pc.rels_seen = false;
   pc.dates_seen = 0;
   pc.days_seen = 0;
-  pc.rels_seen = 0;
   pc.times_seen = 0;
   pc.local_zones_seen = 0;
+  pc.dsts_seen = 0;
   pc.zones_seen = 0;
 
 #if HAVE_STRUCT_TM_TM_ZONE
   pc.local_time_zone_table[0].name = tmp->tm_zone;
   pc.local_time_zone_table[0].type = tLOCAL_ZONE;
   pc.local_time_zone_table[0].value = tmp->tm_isdst;
-  pc.local_time_zone_table[1].name = 0;
+  pc.local_time_zone_table[1].name = NULL;
 
   /* Probe the names used in the next three calendar quarters, looking
      for a tm_isdst different from the one we already have.  */
@@ -928,7 +1304,7 @@ get_date (const char *p, const time_t *now)
     for (quarter = 1; quarter <= 3; quarter++)
       {
        time_t probe = Start + quarter * (90 * 24 * 60 * 60);
-       struct tm *probe_tm = localtime (&probe);
+       struct tm const *probe_tm = localtime (&probe);
        if (probe_tm && probe_tm->tm_zone
            && probe_tm->tm_isdst != pc.local_time_zone_table[0].value)
          {
@@ -936,7 +1312,7 @@ get_date (const char *p, const time_t *now)
                pc.local_time_zone_table[1].name = probe_tm->tm_zone;
                pc.local_time_zone_table[1].type = tLOCAL_ZONE;
                pc.local_time_zone_table[1].value = probe_tm->tm_isdst;
-               pc.local_time_zone_table[2].name = 0;
+               pc.local_time_zone_table[2].name = NULL;
              }
            break;
          }
@@ -945,7 +1321,7 @@ get_date (const char *p, const time_t *now)
 #else
 #if HAVE_TZNAME
   {
-# ifndef tzname
+# if !HAVE_DECL_TZNAME
     extern char *tzname[];
 # endif
     int i;
@@ -955,10 +1331,10 @@ get_date (const char *p, const time_t *now)
        pc.local_time_zone_table[i].type = tLOCAL_ZONE;
        pc.local_time_zone_table[i].value = i;
       }
-    pc.local_time_zone_table[i].name = 0;
+    pc.local_time_zone_table[i].name = NULL;
   }
 #else
-  pc.local_time_zone_table[0].name = 0;
+  pc.local_time_zone_table[0].name = NULL;
 #endif
 #endif
 
@@ -970,153 +1346,214 @@ get_date (const char *p, const time_t *now)
         daylight times.  So if we see that abbreviation, we don't
         know whether it's daylight time.  */
       pc.local_time_zone_table[0].value = -1;
-      pc.local_time_zone_table[1].name = 0;
+      pc.local_time_zone_table[1].name = NULL;
     }
 
-  if (yyparse (&pc) != 0
-      || 1 < pc.times_seen || 1 < pc.dates_seen || 1 < pc.days_seen
-      || 1 < (pc.local_zones_seen + pc.zones_seen)
-      || (pc.local_zones_seen && 1 < pc.local_isdst))
-    return -1;
+  if (yyparse (&pc) != 0)
+    goto fail;
 
-  tm.tm_year = to_year (pc.year) - TM_YEAR_BASE + pc.rel_year;
-  tm.tm_mon = pc.month - 1 + pc.rel_month;
-  tm.tm_mday = pc.day + pc.rel_day;
-  if (pc.times_seen || (pc.rels_seen && ! pc.dates_seen && ! pc.days_seen))
-    {
-      tm.tm_hour = to_hour (pc.hour, pc.meridian);
-      if (tm.tm_hour < 0)
-       return -1;
-      tm.tm_min = pc.minutes;
-      tm.tm_sec = pc.seconds;
-    }
+  if (pc.timespec_seen)
+    *result = pc.seconds;
   else
     {
-      tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
-    }
-
-  /* Let mktime deduce tm_isdst if we have an absolute time stamp,
-     or if the relative time stamp mentions days, months, or years.  */
-  if (pc.dates_seen | pc.days_seen | pc.times_seen | pc.rel_day
-      | pc.rel_month | pc.rel_year)
-    tm.tm_isdst = -1;
+      if (1 < (pc.times_seen | pc.dates_seen | pc.days_seen | pc.dsts_seen
+              | (pc.local_zones_seen + pc.zones_seen)))
+       goto fail;
+
+      tm.tm_year = to_year (pc.year) - TM_YEAR_BASE;
+      tm.tm_mon = pc.month - 1;
+      tm.tm_mday = pc.day;
+      if (pc.times_seen || (pc.rels_seen && ! pc.dates_seen && ! pc.days_seen))
+       {
+         tm.tm_hour = to_hour (pc.hour, pc.meridian);
+         if (tm.tm_hour < 0)
+           goto fail;
+         tm.tm_min = pc.minutes;
+         tm.tm_sec = pc.seconds.tv_sec;
+       }
+      else
+       {
+         tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
+         pc.seconds.tv_nsec = 0;
+       }
 
-  /* But if the input explicitly specifies local time with or without
-     DST, give mktime that information.  */
-  if (pc.local_zones_seen)
-    tm.tm_isdst = pc.local_isdst;
+      /* Let mktime deduce tm_isdst if we have an absolute time stamp.  */
+      if (pc.dates_seen | pc.days_seen | pc.times_seen)
+       tm.tm_isdst = -1;
 
-  tm0 = tm;
+      /* But if the input explicitly specifies local time with or without
+        DST, give mktime that information.  */
+      if (pc.local_zones_seen)
+       tm.tm_isdst = pc.local_isdst;
 
-  Start = mktime (&tm);
+      tm0 = tm;
 
-  if (Start == (time_t) -1)
-    {
+      Start = mktime (&tm);
 
-      /* Guard against falsely reporting errors near the time_t boundaries
-         when parsing times in other time zones.  For example, if the min
-         time_t value is 1970-01-01 00:00:00 UTC and we are 8 hours ahead
-         of UTC, then the min localtime value is 1970-01-01 08:00:00; if
-         we apply mktime to 1970-01-01 00:00:00 we will get an error, so
-         we apply mktime to 1970-01-02 08:00:00 instead and adjust the time
-         zone by 24 hours to compensate.  This algorithm assumes that
-         there is no DST transition within a day of the time_t boundaries.  */
-      if (pc.zones_seen)
+      if (! mktime_ok (&tm0, &tm, Start))
        {
-         tm = tm0;
-         if (tm.tm_year <= EPOCH_YEAR - TM_YEAR_BASE)
-           {
-             tm.tm_mday++;
-             pc.time_zone += 24 * 60;
-           }
+         if (! pc.zones_seen)
+           goto fail;
          else
            {
-             tm.tm_mday--;
-             pc.time_zone -= 24 * 60;
+             /* Guard against falsely reporting errors near the time_t
+                boundaries when parsing times in other time zones.  For
+                example, suppose the input string "1969-12-31 23:00:00 -0100",
+                the current time zone is 8 hours ahead of UTC, and the min
+                time_t value is 1970-01-01 00:00:00 UTC.  Then the min
+                localtime value is 1970-01-01 08:00:00, and mktime will
+                therefore fail on 1969-12-31 23:00:00.  To work around the
+                problem, set the time zone to 1 hour behind UTC temporarily
+                by setting TZ="XXX1:00" and try mktime again.  */
+
+             long int time_zone = pc.time_zone;
+             long int abs_time_zone = time_zone < 0 ? - time_zone : time_zone;
+             long int abs_time_zone_hour = abs_time_zone / 60;
+             int abs_time_zone_min = abs_time_zone % 60;
+             char tz1buf[sizeof "XXX+0:00"
+                         + sizeof pc.time_zone * CHAR_BIT / 3];
+             if (!tz_was_altered)
+               tz0 = get_tz (tz0buf);
+             sprintf (tz1buf, "XXX%s%ld:%02d", "-" + (time_zone < 0),
+                      abs_time_zone_hour, abs_time_zone_min);
+             if (setenv ("TZ", tz1buf, 1) != 0)
+               goto fail;
+             tz_was_altered = true;
+             tm = tm0;
+             Start = mktime (&tm);
+             if (! mktime_ok (&tm0, &tm, Start))
+               goto fail;
            }
-         Start = mktime (&tm);
        }
 
-      if (Start == (time_t) -1)
-       return Start;
-    }
-
-  if (pc.days_seen && ! pc.dates_seen)
-    {
-      tm.tm_mday += ((pc.day_number - tm.tm_wday + 7) % 7
-                    + 7 * (pc.day_ordinal - (0 < pc.day_ordinal)));
-      tm.tm_isdst = -1;
-      Start = mktime (&tm);
-      if (Start == (time_t) -1)
-       return Start;
-    }
+      if (pc.days_seen && ! pc.dates_seen)
+       {
+         tm.tm_mday += ((pc.day_number - tm.tm_wday + 7) % 7
+                        + 7 * (pc.day_ordinal - (0 < pc.day_ordinal)));
+         tm.tm_isdst = -1;
+         Start = mktime (&tm);
+         if (Start == (time_t) -1)
+           goto fail;
+       }
 
-  if (pc.zones_seen)
-    {
-      int delta = pc.time_zone * 60;
+      if (pc.zones_seen)
+       {
+         long int delta = pc.time_zone * 60;
+         time_t t1;
 #ifdef HAVE_TM_GMTOFF
-      delta -= tm.tm_gmtoff;
+         delta -= tm.tm_gmtoff;
 #else
-      struct tm *gmt = gmtime (&Start);
-      if (! gmt)
-       return -1;
-      delta -= tm_diff (&tm, gmt);
+         time_t t = Start;
+         struct tm const *gmt = gmtime (&t);
+         if (! gmt)
+           goto fail;
+         delta -= tm_diff (&tm, gmt);
 #endif
-      if ((Start < Start - delta) != (delta < 0))
-       return -1;      /* time_t overflow */
-      Start -= delta;
+         t1 = Start - delta;
+         if ((Start < t1) != (delta < 0))
+           goto fail;  /* time_t overflow */
+         Start = t1;
+       }
+
+      /* Add relative date.  */
+      if (pc.rel.year | pc.rel.month | pc.rel.day)
+       {
+         int year = tm.tm_year + pc.rel.year;
+         int month = tm.tm_mon + pc.rel.month;
+         int day = tm.tm_mday + pc.rel.day;
+         if (((year < tm.tm_year) ^ (pc.rel.year < 0))
+             | ((month < tm.tm_mon) ^ (pc.rel.month < 0))
+             | ((day < tm.tm_mday) ^ (pc.rel.day < 0)))
+           goto fail;
+         tm.tm_year = year;
+         tm.tm_mon = month;
+         tm.tm_mday = day;
+         tm.tm_hour = tm0.tm_hour;
+         tm.tm_min = tm0.tm_min;
+         tm.tm_sec = tm0.tm_sec;
+         tm.tm_isdst = tm0.tm_isdst;
+         Start = mktime (&tm);
+         if (Start == (time_t) -1)
+           goto fail;
+       }
+
+      /* Add relative hours, minutes, and seconds.  On hosts that support
+        leap seconds, ignore the possibility of leap seconds; e.g.,
+        "+ 10 minutes" adds 600 seconds, even if one of them is a
+        leap second.  Typically this is not what the user wants, but it's
+        too hard to do it the other way, because the time zone indicator
+        must be applied before relative times, and if mktime is applied
+        again the time zone will be lost.  */
+      {
+       long int sum_ns = pc.seconds.tv_nsec + pc.rel.ns;
+       long int normalized_ns = (sum_ns % BILLION + BILLION) % BILLION;
+       time_t t0 = Start;
+       long int d1 = 60 * 60 * pc.rel.hour;
+       time_t t1 = t0 + d1;
+       long int d2 = 60 * pc.rel.minutes;
+       time_t t2 = t1 + d2;
+       long int d3 = pc.rel.seconds;
+       time_t t3 = t2 + d3;
+       long int d4 = (sum_ns - normalized_ns) / BILLION;
+       time_t t4 = t3 + d4;
+
+       if ((d1 / (60 * 60) ^ pc.rel.hour)
+           | (d2 / 60 ^ pc.rel.minutes)
+           | ((t1 < t0) ^ (d1 < 0))
+           | ((t2 < t1) ^ (d2 < 0))
+           | ((t3 < t2) ^ (d3 < 0))
+           | ((t4 < t3) ^ (d4 < 0)))
+         goto fail;
+
+       result->tv_sec = t4;
+       result->tv_nsec = normalized_ns;
+      }
     }
 
-  /* Add relative hours, minutes, and seconds.  Ignore leap seconds;
-     i.e. "+ 10 minutes" means 600 seconds, even if one of them is a
-     leap second.  Typically this is not what the user wants, but it's
-     too hard to do it the other way, because the time zone indicator
-     must be applied before relative times, and if mktime is applied
-     again the time zone will be lost.  */
-  {
-    time_t t0 = Start;
-    long d1 = 60 * 60 * (long) pc.rel_hour;
-    time_t t1 = t0 + d1;
-    long d2 = 60 * (long) pc.rel_minutes;
-    time_t t2 = t1 + d2;
-    int d3 = pc.rel_seconds;
-    time_t t3 = t2 + d3;
-    if ((d1 / (60 * 60) ^ pc.rel_hour)
-       | (d2 / 60 ^ pc.rel_minutes)
-       | ((t0 + d1 < t0) ^ (d1 < 0))
-       | ((t1 + d2 < t1) ^ (d2 < 0))
-       | ((t2 + d3 < t2) ^ (d3 < 0)))
-      return -1;
-    Start = t3;
-  }
+  goto done;
 
-  return Start;
+ fail:
+  ok = false;
+ done:
+  if (tz_was_altered)
+    ok &= (tz0 ? setenv ("TZ", tz0, 1) : unsetenv ("TZ")) == 0;
+  if (tz0 != tz0buf)
+    free (tz0);
+  return ok;
 }
 
 #if TEST
 
-#include <stdio.h>
-
 int
 main (int ac, char **av)
 {
   char buff[BUFSIZ];
-  time_t d;
 
   printf ("Enter date, or blank line to exit.\n\t> ");
   fflush (stdout);
 
-  buff[BUFSIZ - 1] = 0;
+  buff[BUFSIZ - 1] = '\0';
   while (fgets (buff, BUFSIZ - 1, stdin) && buff[0])
     {
-      d = get_date (buff, 0);
-      if (d == (time_t) -1)
+      struct timespec d;
+      struct tm const *tm;
+      if (! get_date (&d, buff, NULL))
        printf ("Bad format - couldn't convert.\n");
+      else if (! (tm = localtime (&d.tv_sec)))
+       {
+         long int sec = d.tv_sec;
+         printf ("localtime (%ld) failed\n", sec);
+       }
       else
-       printf ("%s", ctime (&d));
+       {
+         int ns = d.tv_nsec;
+         printf ("%04ld-%02d-%02d %02d:%02d:%02d.%09d\n",
+                 tm->tm_year + 1900L, tm->tm_mon + 1, tm->tm_mday,
+                 tm->tm_hour, tm->tm_min, tm->tm_sec, ns);
+       }
       printf ("\t> ");
       fflush (stdout);
     }
   return 0;
 }
-#endif /* defined TEST */
+#endif /* TEST */