/* Functions to compute MD4 message digest of files or memory blocks.
according to the definition of MD4 in RFC 1320 from April 1992.
- Copyright (C) 1995,1996,1997,1999,2000,2001,2002,2003,2005,2006
- Free Software Foundation, Inc.
+ Copyright (C) 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2005, 2006,
+ 2008, 2009, 2010 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
/* Adapted by Simon Josefsson from gnulib md5.? and Libgcrypt
cipher/md4.c . */
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
+#include <config.h>
#include "md4.h"
#include <stddef.h>
#include <stdlib.h>
+#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#endif
#ifdef WORDS_BIGENDIAN
-# define SWAP(n) \
+# define SWAP(n) \
(((n) << 24) | (((n) & 0xff00) << 8) | (((n) >> 8) & 0xff00) | ((n) >> 24))
#else
# define SWAP(n) (n)
#endif
-#define BLOCKSIZE 4096
+#define BLOCKSIZE 32768
#if BLOCKSIZE % 64 != 0
# error "invalid BLOCKSIZE"
#endif
ctx->buflen = 0;
}
-/* Put result from CTX in first 16 bytes following RESBUF. The result
- must be in little endian byte order.
+/* Copy the 4 byte value from v into the memory location pointed to by *cp,
+ If your architecture allows unaligned access this is equivalent to
+ * (uint32_t *) cp = v */
+static inline void
+set_uint32 (char *cp, uint32_t v)
+{
+ memcpy (cp, &v, sizeof v);
+}
- IMPORTANT: On some systems it is required that RESBUF is correctly
- aligned for a 32 bits value. */
+/* Put result from CTX in first 16 bytes following RESBUF. The result
+ must be in little endian byte order. */
void *
md4_read_ctx (const struct md4_ctx *ctx, void *resbuf)
{
- ((uint32_t *) resbuf)[0] = SWAP (ctx->A);
- ((uint32_t *) resbuf)[1] = SWAP (ctx->B);
- ((uint32_t *) resbuf)[2] = SWAP (ctx->C);
- ((uint32_t *) resbuf)[3] = SWAP (ctx->D);
+ char *r = resbuf;
+ set_uint32 (r + 0 * sizeof ctx->A, SWAP (ctx->A));
+ set_uint32 (r + 1 * sizeof ctx->B, SWAP (ctx->B));
+ set_uint32 (r + 2 * sizeof ctx->C, SWAP (ctx->C));
+ set_uint32 (r + 3 * sizeof ctx->D, SWAP (ctx->D));
return resbuf;
}
/* Process the remaining bytes in the internal buffer and the usual
- prolog according to the standard and write the result to RESBUF.
-
- IMPORTANT: On some systems it is required that RESBUF is correctly
- aligned for a 32 bits value. */
+ prolog according to the standard and write the result to RESBUF. */
void *
md4_finish_ctx (struct md4_ctx *ctx, void *resbuf)
{
/* Put the 64-bit file length in *bits* at the end of the buffer. */
ctx->buffer[(bytes + pad) / 4] = SWAP (ctx->total[0] << 3);
ctx->buffer[(bytes + pad) / 4 + 1] = SWAP ((ctx->total[1] << 3) |
- (ctx->total[0] >> 29));
+ (ctx->total[0] >> 29));
/* Process last bytes. */
md4_process_block (ctx->buffer, bytes + pad + 8, ctx);
md4_stream (FILE * stream, void *resblock)
{
struct md4_ctx ctx;
- char buffer[BLOCKSIZE + 72];
size_t sum;
+ char *buffer = malloc (BLOCKSIZE + 72);
+ if (!buffer)
+ return 1;
+
/* Initialize the computation context. */
md4_init_ctx (&ctx);
/* Read block. Take care for partial reads. */
while (1)
- {
- n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream);
-
- sum += n;
-
- if (sum == BLOCKSIZE)
- break;
-
- if (n == 0)
- {
- /* Check for the error flag IFF N == 0, so that we don't
- exit the loop after a partial read due to e.g., EAGAIN
- or EWOULDBLOCK. */
- if (ferror (stream))
- return 1;
- goto process_partial_block;
- }
-
- /* We've read at least one byte, so ignore errors. But always
- check for EOF, since feof may be true even though N > 0.
- Otherwise, we could end up calling fread after EOF. */
- if (feof (stream))
- goto process_partial_block;
- }
+ {
+ n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream);
+
+ sum += n;
+
+ if (sum == BLOCKSIZE)
+ break;
+
+ if (n == 0)
+ {
+ /* Check for the error flag IFF N == 0, so that we don't
+ exit the loop after a partial read due to e.g., EAGAIN
+ or EWOULDBLOCK. */
+ if (ferror (stream))
+ {
+ free (buffer);
+ return 1;
+ }
+ goto process_partial_block;
+ }
+
+ /* We've read at least one byte, so ignore errors. But always
+ check for EOF, since feof may be true even though N > 0.
+ Otherwise, we could end up calling fread after EOF. */
+ if (feof (stream))
+ goto process_partial_block;
+ }
/* Process buffer with BLOCKSIZE bytes. Note that
BLOCKSIZE % 64 == 0
/* Construct result in desired memory. */
md4_finish_ctx (&ctx, resblock);
+ free (buffer);
return 0;
}
ctx->buflen += add;
if (ctx->buflen > 64)
- {
- md4_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
+ {
+ md4_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
- ctx->buflen &= 63;
- /* The regions in the following copy operation cannot overlap. */
- memcpy (ctx->buffer, &((char*)ctx->buffer)[(left_over + add) & ~63],
- ctx->buflen);
- }
+ ctx->buflen &= 63;
+ /* The regions in the following copy operation cannot overlap. */
+ memcpy (ctx->buffer, &((char*)ctx->buffer)[(left_over + add) & ~63],
+ ctx->buflen);
+ }
buffer = (const char *) buffer + add;
len -= add;
# define UNALIGNED_P(p) (((size_t) p) % alignof (uint32_t) != 0)
# endif
if (UNALIGNED_P (buffer))
- while (len > 64)
- {
- md4_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx);
- buffer = (const char *) buffer + 64;
- len -= 64;
- }
+ while (len > 64)
+ {
+ md4_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx);
+ buffer = (const char *) buffer + 64;
+ len -= 64;
+ }
else
#endif
- {
- md4_process_block (buffer, len & ~63, ctx);
- buffer = (const char *) buffer + (len & ~63);
- len &= 63;
- }
+ {
+ md4_process_block (buffer, len & ~63, ctx);
+ buffer = (const char *) buffer + (len & ~63);
+ len &= 63;
+ }
}
/* Move remaining bytes in internal buffer. */
memcpy (&((char*)ctx->buffer)[left_over], buffer, len);
left_over += len;
if (left_over >= 64)
- {
- md4_process_block (ctx->buffer, 64, ctx);
- left_over -= 64;
- memcpy (ctx->buffer, &ctx->buffer[16], left_over);
- }
+ {
+ md4_process_block (ctx->buffer, 64, ctx);
+ left_over -= 64;
+ memcpy (ctx->buffer, &ctx->buffer[16], left_over);
+ }
ctx->buflen = left_over;
}
}
#define F(x, y, z) ((z) ^ ((x) & ((y) ^ (z))))
#define G(x, y, z) (((x) & (y)) | ((x) & (z)) | ((y) & (z)))
#define H(x, y, z) ((x) ^ (y) ^ (z))
-#define rol(x,n) ( ((x) << (n)) | ((x) >> (32-(n))) )
+#define rol(x, n) (((x) << (n)) | ((uint32_t) (x) >> (32 - (n))))
#define R1(a,b,c,d,k,s) a=rol(a+F(b,c,d)+x[k],s);
#define R2(a,b,c,d,k,s) a=rol(a+G(b,c,d)+x[k]+K1,s);
#define R3(a,b,c,d,k,s) a=rol(a+H(b,c,d)+x[k]+K2,s);
the loop. */
while (words < endp)
{
- uint32_t tm;
int t;
for (t = 0; t < 16; t++)
- {
- x[t] = SWAP (*words);
- words++;
- }
+ {
+ x[t] = SWAP (*words);
+ words++;
+ }
/* Round 1. */
R1 (A, B, C, D, 0, 3);