-/* md5.c - Functions to compute MD5 message digest of files or memory blocks
+/* Functions to compute MD5 message digest of files or memory blocks.
according to the definition of MD5 in RFC 1321 from April 1992.
- Copyright (C) 1995, 1996, 2001, 2003 Free Software Foundation, Inc.
- NOTE: The canonical source of this file is maintained with the GNU C
- Library. Bugs can be reported to bug-glibc@prep.ai.mit.edu.
+ Copyright (C) 1995-1997, 1999-2001, 2005-2006, 2008-2011 Free Software
+ Foundation, Inc.
+ This file is part of the GNU C Library.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
/* Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. */
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
+#include <config.h>
#include "md5.h"
-#include <sys/types.h>
-
+#include <stddef.h>
#include <stdlib.h>
#include <string.h>
+#include <sys/types.h>
-#include "unlocked-io.h"
+#if USE_UNLOCKED_IO
+# include "unlocked-io.h"
+#endif
#ifdef _LIBC
# include <endian.h>
#endif
#ifdef WORDS_BIGENDIAN
-# define SWAP(n) \
+# define SWAP(n) \
(((n) << 24) | (((n) & 0xff00) << 8) | (((n) >> 8) & 0xff00) | ((n) >> 24))
#else
# define SWAP(n) (n)
#endif
-#define BLOCKSIZE 4096
-/* Ensure that BLOCKSIZE is a multiple of 64. */
+#define BLOCKSIZE 32768
#if BLOCKSIZE % 64 != 0
-/* FIXME-someday (soon?): use #error instead of this kludge. */
-"invalid BLOCKSIZE"
+# error "invalid BLOCKSIZE"
#endif
/* This array contains the bytes used to pad the buffer to the next
ctx->buflen = 0;
}
-/* Put result from CTX in first 16 bytes following RESBUF. The result
- must be in little endian byte order.
+/* Copy the 4 byte value from v into the memory location pointed to by *cp,
+ If your architecture allows unaligned access this is equivalent to
+ * (uint32_t *) cp = v */
+static inline void
+set_uint32 (char *cp, uint32_t v)
+{
+ memcpy (cp, &v, sizeof v);
+}
- IMPORTANT: On some systems it is required that RESBUF is correctly
- aligned for a 32 bits value. */
+/* Put result from CTX in first 16 bytes following RESBUF. The result
+ must be in little endian byte order. */
void *
md5_read_ctx (const struct md5_ctx *ctx, void *resbuf)
{
- ((md5_uint32 *) resbuf)[0] = SWAP (ctx->A);
- ((md5_uint32 *) resbuf)[1] = SWAP (ctx->B);
- ((md5_uint32 *) resbuf)[2] = SWAP (ctx->C);
- ((md5_uint32 *) resbuf)[3] = SWAP (ctx->D);
+ char *r = resbuf;
+ set_uint32 (r + 0 * sizeof ctx->A, SWAP (ctx->A));
+ set_uint32 (r + 1 * sizeof ctx->B, SWAP (ctx->B));
+ set_uint32 (r + 2 * sizeof ctx->C, SWAP (ctx->C));
+ set_uint32 (r + 3 * sizeof ctx->D, SWAP (ctx->D));
return resbuf;
}
/* Process the remaining bytes in the internal buffer and the usual
- prolog according to the standard and write the result to RESBUF.
-
- IMPORTANT: On some systems it is required that RESBUF is correctly
- aligned for a 32 bits value. */
+ prolog according to the standard and write the result to RESBUF. */
void *
md5_finish_ctx (struct md5_ctx *ctx, void *resbuf)
{
/* Take yet unprocessed bytes into account. */
- md5_uint32 bytes = ctx->buflen;
- size_t pad;
+ uint32_t bytes = ctx->buflen;
+ size_t size = (bytes < 56) ? 64 / 4 : 64 * 2 / 4;
/* Now count remaining bytes. */
ctx->total[0] += bytes;
if (ctx->total[0] < bytes)
++ctx->total[1];
- pad = bytes >= 56 ? 64 + 56 - bytes : 56 - bytes;
- memcpy (&ctx->buffer[bytes], fillbuf, pad);
-
/* Put the 64-bit file length in *bits* at the end of the buffer. */
- *(md5_uint32 *) &ctx->buffer[bytes + pad] = SWAP (ctx->total[0] << 3);
- *(md5_uint32 *) &ctx->buffer[bytes + pad + 4] = SWAP ((ctx->total[1] << 3) |
- (ctx->total[0] >> 29));
+ ctx->buffer[size - 2] = SWAP (ctx->total[0] << 3);
+ ctx->buffer[size - 1] = SWAP ((ctx->total[1] << 3) | (ctx->total[0] >> 29));
+
+ memcpy (&((char *) ctx->buffer)[bytes], fillbuf, (size - 2) * 4 - bytes);
/* Process last bytes. */
- md5_process_block (ctx->buffer, bytes + pad + 8, ctx);
+ md5_process_block (ctx->buffer, size * 4, ctx);
return md5_read_ctx (ctx, resbuf);
}
md5_stream (FILE *stream, void *resblock)
{
struct md5_ctx ctx;
- char buffer[BLOCKSIZE + 72];
size_t sum;
+ char *buffer = malloc (BLOCKSIZE + 72);
+ if (!buffer)
+ return 1;
+
/* Initialize the computation context. */
md5_init_ctx (&ctx);
while (1)
{
/* We read the file in blocks of BLOCKSIZE bytes. One call of the
- computation function processes the whole buffer so that with the
- next round of the loop another block can be read. */
+ computation function processes the whole buffer so that with the
+ next round of the loop another block can be read. */
size_t n;
sum = 0;
/* Read block. Take care for partial reads. */
while (1)
- {
- n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream);
-
- sum += n;
-
- if (sum == BLOCKSIZE)
- break;
-
- if (n == 0)
- {
- /* Check for the error flag IFF N == 0, so that we don't
- exit the loop after a partial read due to e.g., EAGAIN
- or EWOULDBLOCK. */
- if (ferror (stream))
- return 1;
- goto process_partial_block;
- }
-
- /* We've read at least one byte, so ignore errors. But always
- check for EOF, since feof may be true even though N > 0.
- Otherwise, we could end up calling fread after EOF. */
- if (feof (stream))
- goto process_partial_block;
- }
+ {
+ n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream);
+
+ sum += n;
+
+ if (sum == BLOCKSIZE)
+ break;
+
+ if (n == 0)
+ {
+ /* Check for the error flag IFF N == 0, so that we don't
+ exit the loop after a partial read due to e.g., EAGAIN
+ or EWOULDBLOCK. */
+ if (ferror (stream))
+ {
+ free (buffer);
+ return 1;
+ }
+ goto process_partial_block;
+ }
+
+ /* We've read at least one byte, so ignore errors. But always
+ check for EOF, since feof may be true even though N > 0.
+ Otherwise, we could end up calling fread after EOF. */
+ if (feof (stream))
+ goto process_partial_block;
+ }
/* Process buffer with BLOCKSIZE bytes. Note that
- BLOCKSIZE % 64 == 0
+ BLOCKSIZE % 64 == 0
*/
md5_process_block (buffer, BLOCKSIZE, &ctx);
}
- process_partial_block:;
+process_partial_block:
/* Process any remaining bytes. */
if (sum > 0)
/* Construct result in desired memory. */
md5_finish_ctx (&ctx, resblock);
+ free (buffer);
return 0;
}
size_t left_over = ctx->buflen;
size_t add = 128 - left_over > len ? len : 128 - left_over;
- memcpy (&ctx->buffer[left_over], buffer, add);
+ memcpy (&((char *) ctx->buffer)[left_over], buffer, add);
ctx->buflen += add;
if (ctx->buflen > 64)
- {
- md5_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
+ {
+ md5_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
- ctx->buflen &= 63;
- /* The regions in the following copy operation cannot overlap. */
- memcpy (ctx->buffer, &ctx->buffer[(left_over + add) & ~63],
- ctx->buflen);
- }
+ ctx->buflen &= 63;
+ /* The regions in the following copy operation cannot overlap. */
+ memcpy (ctx->buffer,
+ &((char *) ctx->buffer)[(left_over + add) & ~63],
+ ctx->buflen);
+ }
buffer = (const char *) buffer + add;
len -= add;
if (len >= 64)
{
#if !_STRING_ARCH_unaligned
-/* To check alignment gcc has an appropriate operator. Other
- compilers don't. */
-# if __GNUC__ >= 2
-# define UNALIGNED_P(p) (((md5_uintptr) p) % __alignof__ (md5_uint32) != 0)
-# else
-# define UNALIGNED_P(p) (((md5_uintptr) p) % sizeof (md5_uint32) != 0)
-# endif
+# define alignof(type) offsetof (struct { char c; type x; }, x)
+# define UNALIGNED_P(p) (((size_t) p) % alignof (uint32_t) != 0)
if (UNALIGNED_P (buffer))
- while (len > 64)
- {
- md5_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx);
- buffer = (const char *) buffer + 64;
- len -= 64;
- }
+ while (len > 64)
+ {
+ md5_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx);
+ buffer = (const char *) buffer + 64;
+ len -= 64;
+ }
else
#endif
- {
- md5_process_block (buffer, len & ~63, ctx);
- buffer = (const char *) buffer + (len & ~63);
- len &= 63;
- }
+ {
+ md5_process_block (buffer, len & ~63, ctx);
+ buffer = (const char *) buffer + (len & ~63);
+ len &= 63;
+ }
}
/* Move remaining bytes in internal buffer. */
{
size_t left_over = ctx->buflen;
- memcpy (&ctx->buffer[left_over], buffer, len);
+ memcpy (&((char *) ctx->buffer)[left_over], buffer, len);
left_over += len;
if (left_over >= 64)
- {
- md5_process_block (ctx->buffer, 64, ctx);
- left_over -= 64;
- memcpy (ctx->buffer, &ctx->buffer[64], left_over);
- }
+ {
+ md5_process_block (ctx->buffer, 64, ctx);
+ left_over -= 64;
+ memcpy (ctx->buffer, &ctx->buffer[16], left_over);
+ }
ctx->buflen = left_over;
}
}
void
md5_process_block (const void *buffer, size_t len, struct md5_ctx *ctx)
{
- md5_uint32 correct_words[16];
- const md5_uint32 *words = buffer;
- size_t nwords = len / sizeof (md5_uint32);
- const md5_uint32 *endp = words + nwords;
- md5_uint32 A = ctx->A;
- md5_uint32 B = ctx->B;
- md5_uint32 C = ctx->C;
- md5_uint32 D = ctx->D;
+ uint32_t correct_words[16];
+ const uint32_t *words = buffer;
+ size_t nwords = len / sizeof (uint32_t);
+ const uint32_t *endp = words + nwords;
+ uint32_t A = ctx->A;
+ uint32_t B = ctx->B;
+ uint32_t C = ctx->C;
+ uint32_t D = ctx->D;
/* First increment the byte count. RFC 1321 specifies the possible
length of the file up to 2^64 bits. Here we only compute the
the loop. */
while (words < endp)
{
- md5_uint32 *cwp = correct_words;
- md5_uint32 A_save = A;
- md5_uint32 B_save = B;
- md5_uint32 C_save = C;
- md5_uint32 D_save = D;
+ uint32_t *cwp = correct_words;
+ uint32_t A_save = A;
+ uint32_t B_save = B;
+ uint32_t C_save = C;
+ uint32_t D_save = D;
/* First round: using the given function, the context and a constant
- the next context is computed. Because the algorithms processing
- unit is a 32-bit word and it is determined to work on words in
- little endian byte order we perhaps have to change the byte order
- before the computation. To reduce the work for the next steps
- we store the swapped words in the array CORRECT_WORDS. */
-
-#define OP(a, b, c, d, s, T) \
- do \
- { \
- a += FF (b, c, d) + (*cwp++ = SWAP (*words)) + T; \
- ++words; \
- a = rol (a, s); \
- a += b; \
- } \
+ the next context is computed. Because the algorithms processing
+ unit is a 32-bit word and it is determined to work on words in
+ little endian byte order we perhaps have to change the byte order
+ before the computation. To reduce the work for the next steps
+ we store the swapped words in the array CORRECT_WORDS. */
+
+#define OP(a, b, c, d, s, T) \
+ do \
+ { \
+ a += FF (b, c, d) + (*cwp++ = SWAP (*words)) + T; \
+ ++words; \
+ CYCLIC (a, s); \
+ a += b; \
+ } \
while (0)
+ /* It is unfortunate that C does not provide an operator for
+ cyclic rotation. Hope the C compiler is smart enough. */
+#define CYCLIC(w, s) (w = (w << s) | (w >> (32 - s)))
+
/* Before we start, one word to the strange constants.
- They are defined in RFC 1321 as
+ They are defined in RFC 1321 as
+
+ T[i] = (int) (4294967296.0 * fabs (sin (i))), i=1..64
+
+ Here is an equivalent invocation using Perl:
- T[i] = (int) (4294967296.0 * fabs (sin (i))), i=1..64, or
- perl -e 'foreach(1..64){printf "0x%08x\n", int (4294967296 * abs (sin $_))}'
+ perl -e 'foreach(1..64){printf "0x%08x\n", int (4294967296 * abs (sin $_))}'
*/
/* Round 1. */
- OP (A, B, C, D, 7, 0xd76aa478);
+ OP (A, B, C, D, 7, 0xd76aa478);
OP (D, A, B, C, 12, 0xe8c7b756);
OP (C, D, A, B, 17, 0x242070db);
OP (B, C, D, A, 22, 0xc1bdceee);
- OP (A, B, C, D, 7, 0xf57c0faf);
+ OP (A, B, C, D, 7, 0xf57c0faf);
OP (D, A, B, C, 12, 0x4787c62a);
OP (C, D, A, B, 17, 0xa8304613);
OP (B, C, D, A, 22, 0xfd469501);
- OP (A, B, C, D, 7, 0x698098d8);
+ OP (A, B, C, D, 7, 0x698098d8);
OP (D, A, B, C, 12, 0x8b44f7af);
OP (C, D, A, B, 17, 0xffff5bb1);
OP (B, C, D, A, 22, 0x895cd7be);
- OP (A, B, C, D, 7, 0x6b901122);
+ OP (A, B, C, D, 7, 0x6b901122);
OP (D, A, B, C, 12, 0xfd987193);
OP (C, D, A, B, 17, 0xa679438e);
OP (B, C, D, A, 22, 0x49b40821);
/* For the second to fourth round we have the possibly swapped words
- in CORRECT_WORDS. Redefine the macro to take an additional first
- argument specifying the function to use. */
+ in CORRECT_WORDS. Redefine the macro to take an additional first
+ argument specifying the function to use. */
#undef OP
-#define OP(f, a, b, c, d, k, s, T) \
- do \
- { \
- a += f (b, c, d) + correct_words[k] + T; \
- a = rol (a, s); \
- a += b; \
- } \
+#define OP(f, a, b, c, d, k, s, T) \
+ do \
+ { \
+ a += f (b, c, d) + correct_words[k] + T; \
+ CYCLIC (a, s); \
+ a += b; \
+ } \
while (0)
/* Round 2. */
- OP (FG, A, B, C, D, 1, 5, 0xf61e2562);
- OP (FG, D, A, B, C, 6, 9, 0xc040b340);
+ OP (FG, A, B, C, D, 1, 5, 0xf61e2562);
+ OP (FG, D, A, B, C, 6, 9, 0xc040b340);
OP (FG, C, D, A, B, 11, 14, 0x265e5a51);
- OP (FG, B, C, D, A, 0, 20, 0xe9b6c7aa);
- OP (FG, A, B, C, D, 5, 5, 0xd62f105d);
- OP (FG, D, A, B, C, 10, 9, 0x02441453);
+ OP (FG, B, C, D, A, 0, 20, 0xe9b6c7aa);
+ OP (FG, A, B, C, D, 5, 5, 0xd62f105d);
+ OP (FG, D, A, B, C, 10, 9, 0x02441453);
OP (FG, C, D, A, B, 15, 14, 0xd8a1e681);
- OP (FG, B, C, D, A, 4, 20, 0xe7d3fbc8);
- OP (FG, A, B, C, D, 9, 5, 0x21e1cde6);
- OP (FG, D, A, B, C, 14, 9, 0xc33707d6);
- OP (FG, C, D, A, B, 3, 14, 0xf4d50d87);
- OP (FG, B, C, D, A, 8, 20, 0x455a14ed);
- OP (FG, A, B, C, D, 13, 5, 0xa9e3e905);
- OP (FG, D, A, B, C, 2, 9, 0xfcefa3f8);
- OP (FG, C, D, A, B, 7, 14, 0x676f02d9);
+ OP (FG, B, C, D, A, 4, 20, 0xe7d3fbc8);
+ OP (FG, A, B, C, D, 9, 5, 0x21e1cde6);
+ OP (FG, D, A, B, C, 14, 9, 0xc33707d6);
+ OP (FG, C, D, A, B, 3, 14, 0xf4d50d87);
+ OP (FG, B, C, D, A, 8, 20, 0x455a14ed);
+ OP (FG, A, B, C, D, 13, 5, 0xa9e3e905);
+ OP (FG, D, A, B, C, 2, 9, 0xfcefa3f8);
+ OP (FG, C, D, A, B, 7, 14, 0x676f02d9);
OP (FG, B, C, D, A, 12, 20, 0x8d2a4c8a);
/* Round 3. */
- OP (FH, A, B, C, D, 5, 4, 0xfffa3942);
- OP (FH, D, A, B, C, 8, 11, 0x8771f681);
+ OP (FH, A, B, C, D, 5, 4, 0xfffa3942);
+ OP (FH, D, A, B, C, 8, 11, 0x8771f681);
OP (FH, C, D, A, B, 11, 16, 0x6d9d6122);
OP (FH, B, C, D, A, 14, 23, 0xfde5380c);
- OP (FH, A, B, C, D, 1, 4, 0xa4beea44);
- OP (FH, D, A, B, C, 4, 11, 0x4bdecfa9);
- OP (FH, C, D, A, B, 7, 16, 0xf6bb4b60);
+ OP (FH, A, B, C, D, 1, 4, 0xa4beea44);
+ OP (FH, D, A, B, C, 4, 11, 0x4bdecfa9);
+ OP (FH, C, D, A, B, 7, 16, 0xf6bb4b60);
OP (FH, B, C, D, A, 10, 23, 0xbebfbc70);
- OP (FH, A, B, C, D, 13, 4, 0x289b7ec6);
- OP (FH, D, A, B, C, 0, 11, 0xeaa127fa);
- OP (FH, C, D, A, B, 3, 16, 0xd4ef3085);
- OP (FH, B, C, D, A, 6, 23, 0x04881d05);
- OP (FH, A, B, C, D, 9, 4, 0xd9d4d039);
+ OP (FH, A, B, C, D, 13, 4, 0x289b7ec6);
+ OP (FH, D, A, B, C, 0, 11, 0xeaa127fa);
+ OP (FH, C, D, A, B, 3, 16, 0xd4ef3085);
+ OP (FH, B, C, D, A, 6, 23, 0x04881d05);
+ OP (FH, A, B, C, D, 9, 4, 0xd9d4d039);
OP (FH, D, A, B, C, 12, 11, 0xe6db99e5);
OP (FH, C, D, A, B, 15, 16, 0x1fa27cf8);
- OP (FH, B, C, D, A, 2, 23, 0xc4ac5665);
+ OP (FH, B, C, D, A, 2, 23, 0xc4ac5665);
/* Round 4. */
- OP (FI, A, B, C, D, 0, 6, 0xf4292244);
- OP (FI, D, A, B, C, 7, 10, 0x432aff97);
+ OP (FI, A, B, C, D, 0, 6, 0xf4292244);
+ OP (FI, D, A, B, C, 7, 10, 0x432aff97);
OP (FI, C, D, A, B, 14, 15, 0xab9423a7);
- OP (FI, B, C, D, A, 5, 21, 0xfc93a039);
- OP (FI, A, B, C, D, 12, 6, 0x655b59c3);
- OP (FI, D, A, B, C, 3, 10, 0x8f0ccc92);
+ OP (FI, B, C, D, A, 5, 21, 0xfc93a039);
+ OP (FI, A, B, C, D, 12, 6, 0x655b59c3);
+ OP (FI, D, A, B, C, 3, 10, 0x8f0ccc92);
OP (FI, C, D, A, B, 10, 15, 0xffeff47d);
- OP (FI, B, C, D, A, 1, 21, 0x85845dd1);
- OP (FI, A, B, C, D, 8, 6, 0x6fa87e4f);
+ OP (FI, B, C, D, A, 1, 21, 0x85845dd1);
+ OP (FI, A, B, C, D, 8, 6, 0x6fa87e4f);
OP (FI, D, A, B, C, 15, 10, 0xfe2ce6e0);
- OP (FI, C, D, A, B, 6, 15, 0xa3014314);
+ OP (FI, C, D, A, B, 6, 15, 0xa3014314);
OP (FI, B, C, D, A, 13, 21, 0x4e0811a1);
- OP (FI, A, B, C, D, 4, 6, 0xf7537e82);
+ OP (FI, A, B, C, D, 4, 6, 0xf7537e82);
OP (FI, D, A, B, C, 11, 10, 0xbd3af235);
- OP (FI, C, D, A, B, 2, 15, 0x2ad7d2bb);
- OP (FI, B, C, D, A, 9, 21, 0xeb86d391);
+ OP (FI, C, D, A, B, 2, 15, 0x2ad7d2bb);
+ OP (FI, B, C, D, A, 9, 21, 0xeb86d391);
/* Add the starting values of the context. */
A += A_save;