/* Provide a replacement for the POSIX nanosleep function.
- Copyright (C) 1999 Free Software Foundation, Inc.
- This program is free software; you can redistribute it and/or modify
+ Copyright (C) 1999, 2000, 2002, 2004, 2005, 2006, 2007, 2008, 2009
+ Free Software Foundation, Inc.
+
+ This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* written by Jim Meyering */
#include <config.h>
+
+#include <time.h>
+
+#include "intprops.h"
+#include "sig-handler.h"
+#include "verify.h"
+
+#include <stdbool.h>
#include <stdio.h>
#include <sys/types.h>
+#include <sys/select.h>
#include <signal.h>
+#include <sys/time.h>
#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif
+#include <unistd.h>
-#include <time.h>
-/* FIXME: is including both like this kosher? */
-#include <sys/time.h>
+#undef nanosleep
-static int suspended;
+enum { BILLION = 1000 * 1000 * 1000 };
-/* Handle SIGCONT. */
+#if HAVE_BUG_BIG_NANOSLEEP
-static void
-sighandler (int sig)
+int
+rpl_nanosleep (const struct timespec *requested_delay,
+ struct timespec *remaining_delay)
{
-#ifdef SA_INTERRUPT
- struct sigaction sigact;
+ /* nanosleep mishandles large sleeps due to internal overflow
+ problems. The worst known case of this is cygwin 1.5.x, which
+ can't sleep more than 49.7 days (2**32 milliseconds). Solve this
+ by breaking the sleep up into smaller chunks. Verify that time_t
+ is large enough. */
+ verify (TYPE_MAXIMUM (time_t) / 49 / 24 / 60 / 60);
+ const time_t limit = 49 * 24 * 60 * 60;
+ time_t seconds = requested_delay->tv_sec;
+ struct timespec intermediate;
+ intermediate.tv_nsec = 0;
+
+ while (limit < seconds)
+ {
+ int result;
+ intermediate.tv_sec = limit;
+ result = nanosleep (&intermediate, remaining_delay);
+ seconds -= limit;
+ if (result)
+ {
+ if (remaining_delay)
+ {
+ remaining_delay->tv_sec += seconds;
+ remaining_delay->tv_nsec += requested_delay->tv_nsec;
+ if (BILLION <= requested_delay->tv_nsec)
+ {
+ remaining_delay->tv_sec++;
+ remaining_delay->tv_nsec -= BILLION;
+ }
+ }
+ return result;
+ }
+ }
+ intermediate.tv_sec = seconds;
+ intermediate.tv_nsec = requested_delay->tv_nsec;
+ return nanosleep (&intermediate, remaining_delay);
+}
- sigact.sa_handler = SIG_DFL;
- sigemptyset (&sigact.sa_mask);
- sigact.sa_flags = 0;
- sigaction (sig, &sigact, NULL);
#else
- signal (sig, SIG_DFL);
-#endif
+/* Some systems (MSDOS) don't have SIGCONT.
+ Using SIGTERM here turns the signal-handling code below
+ into a no-op on such systems. */
+# ifndef SIGCONT
+# define SIGCONT SIGTERM
+# endif
+
+static sig_atomic_t volatile suspended;
+
+/* Handle SIGCONT. */
+
+static void
+sighandler (int sig)
+{
suspended = 1;
- kill (getpid (), sig);
}
-/* Sleep for USEC microseconds. */
+/* Suspend execution for at least *TS_DELAY seconds. */
static void
my_usleep (const struct timespec *ts_delay)
{
struct timeval tv_delay;
tv_delay.tv_sec = ts_delay->tv_sec;
- tv_delay.tv_usec = 1000 * ts_delay->tv_nsec;
- select (0, (void *) 0, (void *) 0, (void *) 0, &tv_delay);
+ tv_delay.tv_usec = (ts_delay->tv_nsec + 999) / 1000;
+ if (tv_delay.tv_usec == 1000000)
+ {
+ time_t t1 = tv_delay.tv_sec + 1;
+ if (t1 < tv_delay.tv_sec)
+ tv_delay.tv_usec = 1000000 - 1; /* close enough */
+ else
+ {
+ tv_delay.tv_sec = t1;
+ tv_delay.tv_usec = 0;
+ }
+ }
+ select (0, NULL, NULL, NULL, &tv_delay);
}
+/* Suspend execution for at least *REQUESTED_DELAY seconds. The
+ *REMAINING_DELAY part isn't implemented yet. */
+
int
-nanosleep (const struct timespec *requested_delay,
- struct timespec *remaining_delay)
+rpl_nanosleep (const struct timespec *requested_delay,
+ struct timespec *remaining_delay)
{
-#ifdef SA_INTERRUPT
- struct sigaction oldact, newact;
-#endif
+ static bool initialized;
- suspended = 0;
+ if (requested_delay->tv_nsec < 0 || BILLION <= requested_delay->tv_nsec)
+ {
+ errno = EINVAL;
+ return -1;
+ }
- /* set up sig handler -- but maybe only do this the first time? */
-#ifdef SA_INTERRUPT
- newact.sa_handler = sighandler;
- sigemptyset (&newact.sa_mask);
- newact.sa_flags = 0;
+ /* set up sig handler */
+ if (! initialized)
+ {
+ struct sigaction oldact;
+
+ sigaction (SIGCONT, NULL, &oldact);
+ if (get_handler (&oldact) != SIG_IGN)
+ {
+ struct sigaction newact;
+
+ newact.sa_handler = sighandler;
+ sigemptyset (&newact.sa_mask);
+ newact.sa_flags = 0;
+ sigaction (SIGCONT, &newact, NULL);
+ }
+ initialized = true;
+ }
- sigaction (SIGCONT, NULL, &oldact);
- if (oldact.sa_handler != SIG_IGN)
- sigaction (SIGCONT, &newact, NULL);
-#else
- if (signal (SIGCONT, SIG_IGN) != SIG_IGN)
- signal (SIGCONT, sighandler);
-#endif
+ suspended = 0;
my_usleep (requested_delay);
/* Calculate time remaining. */
/* FIXME: the code in sleep doesn't use this, so there's no
rush to implement it. */
+
+ errno = EINTR;
}
/* FIXME: Restore sig handler? */
- errno = EINTR;
-
return suspended;
}
+#endif
projects / gnulib.git / blobdiff