-# lib-link.m4 serial 12 (gettext-0.16.2)
+# lib-link.m4 serial 13 (gettext-0.16.2)
dnl Copyright (C) 2001-2007 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
])
dnl Determine the platform dependent parameters needed to use rpath:
-dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
-dnl hardcode_direct, hardcode_minus_L.
+dnl acl_libext,
+dnl acl_shlibext,
+dnl acl_hardcode_libdir_flag_spec,
+dnl acl_hardcode_libdir_separator,
+dnl acl_hardcode_direct,
+dnl acl_hardcode_minus_L.
AC_DEFUN([AC_LIB_RPATH],
[
dnl Tell automake >= 1.10 to complain if config.rpath is missing.
acl_cv_rpath=done
])
wl="$acl_cv_wl"
- libext="$acl_cv_libext"
- shlibext="$acl_cv_shlibext"
- libname_spec="$acl_cv_libname_spec"
- library_names_spec="$acl_cv_library_names_spec"
- hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- hardcode_direct="$acl_cv_hardcode_direct"
- hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ acl_libext="$acl_cv_libext"
+ acl_shlibext="$acl_cv_shlibext"
+ acl_libname_spec="$acl_cv_libname_spec"
+ acl_library_names_spec="$acl_cv_library_names_spec"
+ acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ acl_hardcode_direct="$acl_cv_hardcode_direct"
+ acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
dnl Determine whether the user wants rpath handling at all.
AC_ARG_ENABLE(rpath,
[ --disable-rpath do not hardcode runtime library paths],
found_la=
found_so=
found_a=
- eval libname=\"$libname_spec\" # typically: libname=lib$name
- if test -n "$shlibext"; then
- shrext=".$shlibext" # typically: shrext=.so
+ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
+ if test -n "$acl_shlibext"; then
+ shrext=".$acl_shlibext" # typically: shrext=.so
else
shrext=
fi
dir="$additional_libdir"
dnl The same code as in the loop below:
dnl First look for a shared library.
- if test -n "$shlibext"; then
+ if test -n "$acl_shlibext"; then
if test -f "$dir/$libname$shrext"; then
found_dir="$dir"
found_so="$dir/$libname$shrext"
else
- if test "$library_names_spec" = '$libname$shrext$versuffix'; then
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
ver=`(cd "$dir" && \
for f in "$libname$shrext".*; do echo "$f"; done \
| sed -e "s,^$libname$shrext\\\\.,," \
found_so="$dir/$libname$shrext.$ver"
fi
else
- eval library_names=\"$library_names_spec\"
+ eval library_names=\"$acl_library_names_spec\"
for f in $library_names; do
if test -f "$dir/$f"; then
found_dir="$dir"
fi
dnl Then look for a static library.
if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$libext"; then
+ if test -f "$dir/$libname.$acl_libext"; then
found_dir="$dir"
- found_a="$dir/$libname.$libext"
+ found_a="$dir/$libname.$acl_libext"
fi
fi
if test "X$found_dir" != "X"; then
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
dnl First look for a shared library.
- if test -n "$shlibext"; then
+ if test -n "$acl_shlibext"; then
if test -f "$dir/$libname$shrext"; then
found_dir="$dir"
found_so="$dir/$libname$shrext"
else
- if test "$library_names_spec" = '$libname$shrext$versuffix'; then
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
ver=`(cd "$dir" && \
for f in "$libname$shrext".*; do echo "$f"; done \
| sed -e "s,^$libname$shrext\\\\.,," \
found_so="$dir/$libname$shrext.$ver"
fi
else
- eval library_names=\"$library_names_spec\"
+ eval library_names=\"$acl_library_names_spec\"
for f in $library_names; do
if test -f "$dir/$f"; then
found_dir="$dir"
fi
dnl Then look for a static library.
if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$libext"; then
+ if test -f "$dir/$libname.$acl_libext"; then
found_dir="$dir"
- found_a="$dir/$libname.$libext"
+ found_a="$dir/$libname.$acl_libext"
fi
fi
if test "X$found_dir" != "X"; then
ltrpathdirs="$ltrpathdirs $found_dir"
fi
dnl The hardcoding into $LIBNAME is system dependent.
- if test "$hardcode_direct" = yes; then
+ if test "$acl_hardcode_direct" = yes; then
dnl Using DIR/libNAME.so during linking hardcodes DIR into the
dnl resulting binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
- if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
if test -z "$haveit"; then
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
fi
- if test "$hardcode_minus_L" != no; then
+ if test "$acl_hardcode_minus_L" != no; then
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
- dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
+ dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
dnl here, because this doesn't fit in flags passed to the
dnl compiler. So give up. No hardcoding. This affects only
dnl very old systems.
done
done
if test "X$rpathdirs" != "X"; then
- if test -n "$hardcode_libdir_separator"; then
+ if test -n "$acl_hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user must
dnl pass all path elements in one option. We can arrange that for a
dnl single library, but not when more than one $LIBNAMEs are used.
alldirs=
for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
done
- dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
+ dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
acl_save_libdir="$libdir"
libdir="$alldirs"
- eval flag=\"$hardcode_libdir_flag_spec\"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
else
for found_dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$found_dir"
- eval flag=\"$hardcode_libdir_flag_spec\"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
done
AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
$1=
if test "$enable_rpath" != no; then
- if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode directories into the resulting
dnl binary.
rpathdirs=
done
else
dnl The linker is used for linking directly.
- if test -n "$hardcode_libdir_separator"; then
+ if test -n "$acl_hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user
dnl must pass all path elements in one option.
alldirs=
for dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$dir"
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
done
acl_save_libdir="$libdir"
libdir="$alldirs"
- eval flag=\"$hardcode_libdir_flag_spec\"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
$1="$flag"
else
for dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$dir"
- eval flag=\"$hardcode_libdir_flag_spec\"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
$1="${$1}${$1:+ }$flag"
done
projects / gnulib.git / blobdiff