#
-# Sample config for Mir
-# by Matthias <mjordan@code-fu.de> 2001-09-12
-#
-# The Mir software realizes a semi-dynamic web service:
-# The web server that is accessed by users has pure static
-# pages. These pages are generated by the Mir software that
-# consists of a collection of Java servlets and HTML templates.
-# Mir uses a database server to store the data that is needed to
-# build the static site.
-# So there are basically three parts in this config file:
-#
-# a) general setup
-# b) static site config
-# c) dynamic admin site
-# d) database config
-#
-# edit this to suit your needs (here with sampleuser idfx)
-# After you edited this file, build.sh has to be invoked.
-# To be sure, also restart Tomcat.
-#
-# Note that for Mir to work, Tomcat has to be set up to handle all
-# URLs that begin with /servlet. All other URLs are handled by Apache.
-#
-# The setup uses the following assumptions:
-# The URL to reach the site is http://indy.code-fu.de
-# The StorageRoot of this URL is /pub/Dokumente/Indymedia/de-tech/Mir
-# All data is located below this directory, including the servlets.
-
-
-#
-#
# GENERAL SETUP
#
+# This is a full list of defaults options. To configure your site
+# do NOT change this file. You can override all of these values in
+# your etc/config.properties
+#
### mir/imc information
Mir.Name=mir.indymedia.org
Mir.Public-email.address=mir-coders@lists.indymedia.org
Mir.Public-email.name=mir-coders mailinglist
-Mir.Version=1.1beta
+Mir.Version=1.1.0rc0
DirectOpenposting=yes
# The name of the abuse config file (relative to the WEB-INF dir)
#where to put the lucene index
-IndexPath=/tmp/index
+IndexPath=index
TempDir=/tmp
# Log admin activity?
Mir.Admin.LogAdminActivity=0
+# Limit the length of text shown in lists (-1 means no limit)
+Mir.Admin.ListTextLengthLimit=-1
+
# Which usernames have admin priviliges (, seperated usernames)
AccessControl.SuperUsers = admin
+# Locking enabled?
+AccessControl.LockingEnabled = 0
+
+# If locking enabled, should users lock articles before they
+# can edit?
+AccessControl.LockingOptional = 1
+
# the templates
Mir.Localizer.Producer.GeneratorLibrary= default=freemarker(etc/producer/)
-Mir.Localizer.Admin.GeneratorLibrary= default=freemarker(templates/admin/)
+Mir.Localizer.Admin.GeneratorLibrary= default=freemarker(templates/admin/),preview=freemarker(etc/producer)
Mir.Localizer.OpenPosting.GeneratorLibrary= default=freemarker(etc/open/)
# How should the custom operations (hide etc) in article and comment lists
# be presented?
# 0 = links, 1 = checkboxes, 2 = a listbox
-Mir.Localizer.Admin.ListOperationsFlavor=1
-
-
+Mir.Localizer.Admin.ListOperationsFlavor=2
+
+# Article previews, a comma seperated list of name = generator
+Mir.Localizer.Admin.ArticlePreview = \
+ default = preview::article.template
+Mir.Localizer.Admin.ArticlePreviewLanguage=en
# How should the topics be presented on the article edit page?
#
# Article Preview Link URL (Link to produced articles from within admin)
Comment.PublicUrl=/en/${date.formatted.yyyy}/${date.formatted.MM}/${id}.shtml
-Article.PublicUrl=/en/${co_content.date.formatted.yyyy}/${to_content.date.formatted.MM}/${to_content.id}.shtml
+Article.PublicUrl=/en/${to_content.date.formatted.yyyy}/${to_content.date.formatted.MM}/${to_content.id}.shtml
-# enable deletion of comments/articles?
+# which 'quick' operations should be available in the top-left box?
Mir.Localizer.Admin.AdministerOperations= \
comments:module=Comment&do=list
-
# Which producers need to be called after an article (resp. a comment) is posted
Mir.Localizer.OpenPosting.ContentProducers= media.new;articles.changed;startpage.generate;synchronization.run
Mir.Localizer.OpenPosting.CommentProducers= articles.changed;synchronization.run
# Which producers need to be called after the "produce all new" link is clicked from admin
-Mir.Localizer.Producer.AllNewProducers= media.new;articles.changed;startpage.run;synchronization.run
-
+Mir.Localizer.Producer.ProducerRecipes= \
+ allnew = media.new;articles.changed;startpage.run;synchronization.run
-#note that you can't make pdf's without making fo's
-#this is actually now set in producers.xml
-#but these summarize what is said in there for the benefit of OpenMir
-GenerateFO=yes
-GeneratePDF=yes
#use rsync to mirror the website to a remote-host
Rsync=no
# FileEdit module
# a list of directories to edit
-# format:
+# format:
# <name>:<path>:<file filter>:<0|1 (recursion off or on)> [, ....]
ServletModule.FileEdit.Configuration= \
Producer.HTML2FOStyleSheet=/some/dir/mir/etc/producer/html2fo.xsl
# the following lines are used to construct PDFs on the fly from one or more articles
-# for the moment, if you want to change anything else about your pdfs, you
+# for the moment, if you want to change anything else about your pdfs, you
# will have to learn some java!
#
-# keep in mind that there may not be enough room for all the text you enter as the
-# value of one these options, if text doesn't appear, the only easy thing to do is
+# keep in mind that there may not be enough room for all the text you enter as the
+# value of one these options, if text doesn't appear, the only easy thing to do is
# use less text!
#
# also, be sure to adjust the corresponding line height if you change a font size...
PDF.Title.LineHeight=28
PDF.Title.FontFamily=courier
-# footer is about two lines of small text which will appear at the bottom of every page
+# footer is about two lines of small text which will appear at the bottom of every page
PDF.Footer.String=Indymedia does blah. Content is good, and free to use for non-commercial purposes under the Open Content license. if you have questions, email someone.
PDF.Footer.Height=54
PDF.Footer.FontSize=12
-PDF.Footer.FontFamily=helvetica
+PDF.Footer.FontFamily=helvetica
# how to format the index, i.e. the newsletter table of contents
PDF.Meta.Height=36
PDF.Meta.FontSize=14
-PDF.Meta.FontFamily=helvetica
+PDF.Meta.FontFamily=helvetica
RDF.Meta.DateFormat=yyyy-MM-dd HH:mm
# how to format the article description
# Default date/time format
Mir.DefaultDateTimeFormat = yyyy-MM-dd HH:mm
+# Compatibility feature: updated posting forms can
+# support persistent uploads (that is, uploads remainig
+# valid after validation errors). To support existing
+# forms, by default it is off.
+Localizer.OpenSession.PersistentUploadedFiles = 0
+# Should support for ftp-like uploads (uploads done
+# outside of mir, but included into postings) be
+# supported at all?
+Localizer.OpenSession.AllowFTPUploads = 0
+# When uploading ftp files, should a list of available
+# files be displayed?
+Localizer.OpenSession.AllowFTPUploadSelection = 0
+
+# What is the place where files are uploaded?
+Localizer.OpenSession.FTPDirectory = /somewhere
Localizer.OpenSession.article.EditTemplate = editarticle.template
Localizer.OpenSession.article.DupeTemplate = dupearticle.template
Localizer.OpenSession.comment.DefaultMediaFolder=openposting
Localizer.OpenSession.ErrorTemplate = sessionerror.template
+Localizer.OpenSession.translation.EditTemplate=edittranslation.template
+Localizer.OpenSession.translation.DupeTemplate=dupearticle.template
+Localizer.OpenSession.translation.UnsupportedMediaTemplate=unsupportedmediatype.template
+Localizer.OpenSession.translation.DoneTemplate=donetranslation.template
+
+
Localizer.OpenSession.email.PrepareTemplate = preparemail.template
Localizer.OpenSession.email.MailTemplate = email_article.template
Localizer.OpenSession.email.DoneTemplate =/sent_mail.template
+Localizer.HTML.Whitelist=a,img,h1,h2,h3,h4,h5,h6,br,form,input,hr,strong,font,b,i,em,p,table,tr,td,th,ul,ol,li
#
ServletModule.CommentStatus.EditTemplate=commentstatus.template
ServletModule.CommentStatus.ListTemplate=commentstatuslist.template
+ServletModule.MediaType.DeleteConfirmationTemplate=confirm.template
+ServletModule.MediaType.EditTemplate=mediatype.template
+ServletModule.MediaType.ListTemplate=mediatypelist.template
+
+
+#
+# Object store configuration
+#
+
+StoreContainer.EntityDefaultSize= 45
+StoreContainer.EntityListDefaultSize= 15
+StorableObjectEntity.Entity.DefaultSize= 300
+StorableObjectEntity.EntityList.DefaultSize= 100
+EntityTopics.Entity.DefaultSize=200
+EntityTopics.EntityList.DefaultSize=20
+
+
#
# config for abuse
-ServletModule.Abuse.EditFilter.Template = abuse.filter.template\r
-ServletModule.Abuse.ListFilters.Template = abuse.filters.template\r
-ServletModule.Abuse.ViewLog.Template = abuse.log.template\r
-ServletModule.Abuse.Main.Template = abuse.template\r
+ServletModule.Abuse.EditFilter.Template = filter.template
+ServletModule.Abuse.ListFilters.Template = filterlist.template
+ServletModule.Abuse.EditFilterGroup.Template = filtergroup.template
+ServletModule.Abuse.ListFilterGroups.Template = filtergrouplist.template
+ServletModule.Abuse.ViewLog.Template = abuse.log.template
+ServletModule.Abuse.Main.Template = abuse.template
#
# producer-related configs below
Producer.IntLinkName=intlink.gif
Producer.MailLinkName=maillink.gif
+# should the <Bundle producer tag be backwards compatible
+# (this means that old bundle paths get mapped to new ones)
+Producer.BundleCompatibility=1
projects / mir.git / blobdiff