# 4. Finally
# $ exit
+ME_=`expr "./$0" : '.*/\(.*\)$'`
+
+# We use a trap below for cleanup. This requires us to go through
+# hoops to get the right exit status transported through the handler.
+# So use `Exit STATUS' instead of `exit STATUS' inside of the tests.
+# Turn off errexit here so that we don't trip the bug with OSF1/Tru64
+# sh inside this function.
+Exit () { set +e; (exit $1); exit $1; }
+
+# Print warnings (e.g., about skipped and failed tests) to this file number.
+# Override by defining to say, 9, in init.cfg, and putting say,
+# "export ...ENVVAR_SETTINGS...; exec 9>&2; $(SHELL)" in the definition
+# of TESTS_ENVIRONMENT in your tests/Makefile.am file.
+# This is useful when using automake's parallel tests mode, to print
+# the reason for skip/failure to console, rather than to the .log files.
+: ${stderr_fileno_=2}
+
+warn_() { echo "$@" 1>&$stderr_fileno_; }
+fail_() { warn_ "$ME_: failed test: $@"; Exit 1; }
+skip_() { warn_ "$ME_: skipped test: $@"; Exit 77; }
+framework_failure_() { warn_ "$ME_: set-up failure: $@"; Exit 99; }
+
# We require $(...) support unconditionally.
# We require a few additional shell features only when $EXEEXT is nonempty,
# in order to support automatic $EXEEXT emulation:
# - hyphen-containing alias names
# - we prefer to use ${var#...} substitution, rather than having
# to work around lack of support for that feature.
-# The following code attempts to find a shell with support for these features
-# and re-exec's it. If not, it skips the current test.
+# The following code attempts to find a shell with support for these features.
+# If the current shell passes the test, we're done. Otherwise, test other
+# shells until we find one that passes. If one is found, re-exec it.
+# If no acceptable shell is found, skip the current test.
+#
+# Use "9" to indicate success (rather than 0), in case some shell acts
+# like Solaris 10's /bin/sh but exits successfully instead of with status 2.
gl_shell_test_script_='
test $(echo y) = y || exit 1
-test -z "$EXEEXT" && exit 0
+test -z "$EXEEXT" && exit 9
shopt -s expand_aliases
alias a-b="echo zoo"
v=abx
test ${v%x} = ab \
&& test ${v#a} = bx \
- && test $(a-b) = zoo
+ && test $(a-b) = zoo \
+ && exit 9
'
if test "x$1" = "x--no-reexec"; then
shift
else
- for re_shell_ in "${CONFIG_SHELL:-no_shell}" /bin/sh bash dash zsh pdksh fail
- do
- test "$re_shell_" = no_shell && continue
- test "$re_shell_" = fail && skip_ failed to find an adequate shell
- if "$re_shell_" -c "$gl_shell_test_script_" 2>/dev/null; then
- exec "$re_shell_" "$0" --no-reexec "$@"
- echo "$ME_: exec failed" 1>&2
- exit 127
- fi
- done
+ # 'eval'ing the above code makes Solaris 10's /bin/sh exit with $? set to 2.
+ # It does not evaluate any of the code after the "unexpected" `('. Thus,
+ # we must run it in a subshell.
+ ( eval "$gl_shell_test_script_" ) > /dev/null 2>&1
+ if test $? = 9; then
+ : # The current shell is adequate. No re-exec required.
+ else
+ # Search for a shell that meets our requirements.
+ for re_shell_ in "${CONFIG_SHELL:-no_shell}" /bin/sh bash dash zsh pdksh fail
+ do
+ test "$re_shell_" = no_shell && continue
+ test "$re_shell_" = fail && skip_ failed to find an adequate shell
+ "$re_shell_" -c "$gl_shell_test_script_" 2>/dev/null
+ if test $? = 9; then
+ # Found an acceptable shell.
+ exec "$re_shell_" "$0" --no-reexec "$@"
+ echo "$ME_: exec failed" 1>&2
+ exit 127
+ fi
+ done
+ fi
fi
test -n "$EXEEXT" && shopt -s expand_aliases
# This is cheap and useful for exposing code that depends on the fact that
# malloc-related functions often return memory that is mostly zeroed.
# If you have the time and cycles, use valgrind to do an even better job.
-${MALLOC_PERTURB_=87}
+: ${MALLOC_PERTURB_=87}
export MALLOC_PERTURB_
-# We use a trap below for cleanup. This requires us to go through
-# hoops to get the right exit status transported through the handler.
-# So use `Exit STATUS' instead of `exit STATUS' inside of the tests.
-# Turn off errexit here so that we don't trip the bug with OSF1/Tru64
-# sh inside this function.
-Exit () { set +e; (exit $1); exit $1; }
-
-# Print warnings (e.g., about skipped and failed tests) to this file number.
-# Override by defining to say, 9, in init.cfg, and putting say,
-# "export ...ENVVAR_SETTINGS...; exec 9>&2; $(SHELL)" in the definition
-# of TESTS_ENVIRONMENT in your tests/Makefile.am file.
-# This is useful when using automake's parallel tests mode, to print
-# the reason for skip/failure to console, rather than to the .log files.
-: ${stderr_fileno_=2}
-
-warn_() { echo "$@" 1>&$stderr_fileno_; }
-fail_() { warn_ "$ME_: failed test: $@"; Exit 1; }
-skip_() { warn_ "$ME_: skipped test: $@"; Exit 77; }
-framework_failure_() { warn_ "$ME_: set-up failure: $@"; Exit 1; }
-
# This is a stub function that is run upon trap (upon regular exit and
# interrupt). Override it with a per-test function, e.g., to unmount
# a partition, or to undo any other global state changes.
cleanup_() { :; }
-if ( diff --version < /dev/null 2>&1 | grep GNU ) 2>&1 > /dev/null; then
+if ( diff --version < /dev/null 2>&1 | grep GNU ) > /dev/null 2>&1; then
compare() { diff -u "$@"; }
-elif ( cmp --version < /dev/null 2>&1 | grep GNU ) 2>&1 > /dev/null; then
+elif ( cmp --version < /dev/null 2>&1 | grep GNU ) > /dev/null 2>&1; then
compare() { cmp -s "$@"; }
else
compare() { cmp "$@"; }
test "$VERBOSE" = yes && set -x
initial_cwd_=$PWD
- ME_=`expr "./$0" : '.*/\(.*\)$'`
pfx_=`testdir_prefix_`
test_dir_=`mktempd_ "$initial_cwd_" "$pfx_-$ME_.XXXX"` \
|| fail_ "failed to create temporary directory in $initial_cwd_"
cd "$test_dir_"
- # These trap statements ensure that the temporary directory, $test_dir_,
- # is removed upon exit as well as upon receipt of any of the listed signals.
- trap remove_tmp_ 0
+ # This trap statement, along with a trap on 0 below, ensure that the
+ # temporary directory, $test_dir_, is removed upon exit as well as
+ # upon receipt of any of the listed signals.
for sig_ in 1 2 3 13 15; do
eval "trap 'Exit $(expr $sig_ + 128)' $sig_"
done
&& . "$srcdir/init.cfg"
setup_ "$@"
+# This trap is here, rather than in the setup_ function, because some
+# shells run the exit trap at shell function exit, rather than script exit.
+trap remove_tmp_ 0
projects / gnulib.git / blobdiff