X-Git-Url: http://erislabs.net/gitweb/?a=blobdiff_plain;f=build-aux%2Fgendocs.sh;h=67d5b52cabe5c3121a07dbfeb0f07b8933f88465;hb=b187ff0528e2a081392a834e684d1d0c161708a7;hp=cf96b26a58e541936e826f05363d82cb09fec05b;hpb=5805f8295c2199d8343cecd335ab4d75272bff91;p=gnulib.git
diff --git a/build-aux/gendocs.sh b/build-aux/gendocs.sh
index cf96b26a5..67d5b52ca 100755
--- a/build-aux/gendocs.sh
+++ b/build-aux/gendocs.sh
@@ -1,15 +1,16 @@
-#!/bin/sh
+#!/bin/sh -e
# gendocs.sh -- generate a GNU manual in many formats. This script is
# mentioned in maintain.texi. See the help message below for usage details.
-scriptversion=2007-04-02.15
+scriptversion=2010-02-13.20
-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# Copyright 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+# Free Software Foundation, Inc.
#
-# This program is free software; you can redistribute it and/or modify
+# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -17,9 +18,7 @@ scriptversion=2007-04-02.15
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can either send email to this
-# program's maintainer or write to: The Free Software Foundation,
-# Inc.; 51 Franklin Street, Fifth Floor; Boston, MA 02110-1301, USA.
+# along with this program. If not, see .
#
# Original author: Mohit Agarwal.
# Send bug reports and any other correspondence to bug-texinfo@gnu.org.
@@ -39,11 +38,13 @@ templateurl="http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/texinfo/texinfo/
: ${DOCBOOK2PS="docbook2ps"}
: ${DOCBOOK2TXT="docbook2txt"}
: ${GENDOCS_TEMPLATE_DIR="."}
+: ${TEXI2HTML="texi2html"}
unset CDPATH
+unset use_texi2html
version="gendocs.sh $scriptversion
-Copyright (C) 2007 Free Software Foundation, Inc.
+Copyright 2009 Free Software Foundation, Inc.
There is NO warranty. You may redistribute this software
under the terms of the GNU General Public License.
For more information about these matters, see the files named COPYING."
@@ -55,24 +56,30 @@ See the GNU Maintainers document for a more extensive discussion:
http://www.gnu.org/prep/maintain_toc.html
Options:
+ -s SRCFILE read Texinfo from SRCFILE, instead of PACKAGE.{texinfo|texi|txi}
-o OUTDIR write files into OUTDIR, instead of manual/.
+ --email ADR use ADR as contact in generated web pages.
--docbook convert to DocBook too (xml, txt, html, pdf and ps).
- --html ARG pass indicated ARG to makeinfo for HTML targets.
+ --html ARG pass indicated ARG to makeinfo or texi2html for HTML targets.
+ --texi2html use texi2html to generate HTML targets.
--help display this help and exit successfully.
--version display version information and exit successfully.
-Simple example: $prog emacs \"GNU Emacs Manual\"
+Simple example: $prog --email bug-gnu-emacs@gnu.org emacs \"GNU Emacs Manual\"
Typical sequence:
- cd YOURPACKAGESOURCE/doc
+ cd PACKAGESOURCE/doc
wget \"$scripturl\"
wget \"$templateurl\"
- $prog YOURMANUAL \"GNU YOURMANUAL - One-line description\"
+ $prog --email BUGLIST MANUAL \"GNU MANUAL - One-line description\"
Output will be in a new subdirectory \"manual\" (by default, use -o OUTDIR
to override). Move all the new files into your web CVS tree, as
explained in the Web Pages node of maintain.texi.
+Please use the --email ADDRESS option to specify your bug-reporting
+address in the generated HTML pages.
+
MANUAL-TITLE is included as part of the HTML
of the overall
manual/index.html file. It should include the name of the package being
documented. manual/index.html is created by substitution from the file
@@ -80,11 +87,11 @@ $GENDOCS_TEMPLATE_DIR/gendocs_template. (Feel free to modify the
generic template for your own purposes.)
If you have several manuals, you'll need to run this script several
-times with different YOURMANUAL values, specifying a different output
+times with different MANUAL values, specifying a different output
directory with -o each time. Then write (by hand) an overall index.html
with links to them all.
-If a manual's texinfo sources are spread across several directories,
+If a manual's Texinfo sources are spread across several directories,
first copy or symlink all Texinfo sources into a single directory.
(Part of the script's work is to make a tar.gz of the sources.)
@@ -92,11 +99,11 @@ You can set the environment variables MAKEINFO, TEXI2DVI, and DVIPS to
control the programs that get executed, and GENDOCS_TEMPLATE_DIR to
control where the gendocs_template file is looked for. (With --docbook,
the environment variables DOCBOOK2HTML, DOCBOOK2PDF, DOCBOOK2PS, and
-DOCBOOK2TXT are also respected.)
+DOCBOOK2TXT are also respected.)
By default, makeinfo is run in the default (English) locale, since
that's the language of most Texinfo manuals. If you happen to have a
-non-English manual and non-English web site, check the SETLANG setting
+non-English manual and non-English web site, see the SETLANG setting
in the source.
Email bug reports or enhancement requests to bug-texinfo@gnu.org.
@@ -108,20 +115,25 @@ calcsize()
echo $size
}
-outdir=manual
-html=
-PACKAGE=
MANUAL_TITLE=
+PACKAGE=
+EMAIL=webmasters@gnu.org # please override with --email
+htmlarg=
+outdir=manual
+srcfile=
while test $# -gt 0; do
case $1 in
+ --email) shift; EMAIL=$1;;
--help) echo "$usage"; exit 0;;
--version) echo "$version"; exit 0;;
+ -s) shift; srcfile=$1;;
-o) shift; outdir=$1;;
--docbook) docbook=yes;;
- --html) shift; html=$1;;
+ --html) shift; htmlarg=$1;;
+ --texi2html) use_texi2html=1;;
-*)
- echo "$0: Unknown or ambiguous option \`$1'." >&2
+ echo "$0: Unknown option \`$1'." >&2
echo "$0: Try \`--help' for more information." >&2
exit 1;;
*)
@@ -137,7 +149,9 @@ while test $# -gt 0; do
shift
done
-if test -s "$srcdir/$PACKAGE.texinfo"; then
+if test -n "$srcfile"; then
+ :
+elif test -s "$srcdir/$PACKAGE.texinfo"; then
srcfile=$srcdir/$PACKAGE.texinfo
elif test -s "$srcdir/$PACKAGE.texi"; then
srcfile=$srcdir/$PACKAGE.texi
@@ -154,6 +168,11 @@ if test ! -r $GENDOCS_TEMPLATE_DIR/gendocs_template; then
exit 1
fi
+case $outdir in
+ /*) dotdot_outdir="$outdir";;
+ *) dotdot_outdir="../$outdir";;
+esac
+
echo Generating output formats for $srcfile
cmd="$SETLANG $MAKEINFO -o $PACKAGE.info \"$srcfile\""
@@ -195,37 +214,73 @@ gzip -f -9 -c $PACKAGE.txt >$outdir/$PACKAGE.txt.gz
ascii_gz_size=`calcsize $outdir/$PACKAGE.txt.gz`
mv $PACKAGE.txt $outdir/
-cmd="$SETLANG $MAKEINFO --no-split --html -o $PACKAGE.html $html \"$srcfile\""
-echo "Generating monolithic html... ($cmd)"
-rm -rf $PACKAGE.html # in case a directory is left over
-eval "$cmd"
-html_mono_size=`calcsize $PACKAGE.html`
-gzip -f -9 -c $PACKAGE.html >$outdir/$PACKAGE.html.gz
-html_mono_gz_size=`calcsize $outdir/$PACKAGE.html.gz`
-mv $PACKAGE.html $outdir/
+html_split()
+{
+ opt="--split=$1 $htmlarg --node-files"
+ cmd="$SETLANG $TEXI2HTML --output $PACKAGE.html $opt \"$srcfile\""
+ echo "Generating html by $1... ($cmd)"
+ eval "$cmd"
+ split_html_dir=$PACKAGE.html
+ (
+ cd ${split_html_dir} || exit 1
+ ln -sf ${PACKAGE}.html index.html
+ tar -czf $dotdot_outdir/${PACKAGE}.html_$1.tar.gz -- *.html
+ )
+ eval html_$1_tgz_size=`calcsize $outdir/${PACKAGE}.html_$1.tar.gz`
+ rm -f $outdir/html_$1/*.html
+ mkdir -p $outdir/html_$1/
+ mv ${split_html_dir}/*.html $outdir/html_$1/
+ rmdir ${split_html_dir}
+}
-cmd="$SETLANG $MAKEINFO --html -o $PACKAGE.html $html \"$srcfile\""
-echo "Generating html by node... ($cmd)"
-eval "$cmd"
-split_html_dir=$PACKAGE.html
-(
- cd ${split_html_dir} || exit 1
- tar -czf ../$outdir/${PACKAGE}.html_node.tar.gz -- *.html
-)
-html_node_tgz_size=`calcsize $outdir/${PACKAGE}.html_node.tar.gz`
-rm -f $outdir/html_node/*.html
-mkdir -p $outdir/html_node/
-mv ${split_html_dir}/*.html $outdir/html_node/
-rmdir ${split_html_dir}
+if test -z "$use_texi2html"; then
+ opt="--no-split --html -o $PACKAGE.html $htmlarg"
+ cmd="$SETLANG $MAKEINFO $opt \"$srcfile\""
+ echo "Generating monolithic html... ($cmd)"
+ rm -rf $PACKAGE.html # in case a directory is left over
+ eval "$cmd"
+ html_mono_size=`calcsize $PACKAGE.html`
+ gzip -f -9 -c $PACKAGE.html >$outdir/$PACKAGE.html.gz
+ html_mono_gz_size=`calcsize $outdir/$PACKAGE.html.gz`
+ mv $PACKAGE.html $outdir/
+
+ cmd="$SETLANG $MAKEINFO --html -o $PACKAGE.html $htmlarg \"$srcfile\""
+ echo "Generating html by node... ($cmd)"
+ eval "$cmd"
+ split_html_dir=$PACKAGE.html
+ (
+ cd ${split_html_dir} || exit 1
+ tar -czf $dotdot_outdir/${PACKAGE}.html_node.tar.gz -- *.html
+ )
+ html_node_tgz_size=`calcsize $outdir/${PACKAGE}.html_node.tar.gz`
+ rm -f $outdir/html_node/*.html
+ mkdir -p $outdir/html_node/
+ mv ${split_html_dir}/*.html $outdir/html_node/
+ rmdir ${split_html_dir}
+else
+ cmd="$SETLANG $TEXI2HTML --output $PACKAGE.html $htmlarg \"$srcfile\""
+ echo "Generating monolithic html... ($cmd)"
+ rm -rf $PACKAGE.html # in case a directory is left over
+ eval "$cmd"
+ html_mono_size=`calcsize $PACKAGE.html`
+ gzip -f -9 -c $PACKAGE.html >$outdir/$PACKAGE.html.gz
+ html_mono_gz_size=`calcsize $outdir/$PACKAGE.html.gz`
+ mv $PACKAGE.html $outdir/
+
+ html_split node
+ html_split chapter
+ html_split section
+fi
echo Making .tar.gz for sources...
-srcfiles=`ls *.texinfo *.texi *.txi *.eps 2>/dev/null`
+d=`dirname $srcfile`
+srcfiles=`ls $d/*.texinfo $d/*.texi $d/*.txi $d/*.eps 2>/dev/null` || true
tar cvzfh $outdir/$PACKAGE.texi.tar.gz $srcfiles
texi_tgz_size=`calcsize $outdir/$PACKAGE.texi.tar.gz`
if test -n "$docbook"; then
cmd="$SETLANG $MAKEINFO -o - --docbook \"$srcfile\" > ${srcdir}/$PACKAGE-db.xml"
- echo "Generating docbook XML... $(cmd)"
+ echo "Generating docbook XML... ($cmd)"
eval "$cmd"
docbook_xml_size=`calcsize $PACKAGE-db.xml`
gzip -f -9 -c $PACKAGE-db.xml >$outdir/$PACKAGE-db.xml.gz
@@ -238,7 +293,7 @@ if test -n "$docbook"; then
split_html_db_dir=html_node_db
(
cd ${split_html_db_dir} || exit 1
- tar -czf ../$outdir/${PACKAGE}.html_node_db.tar.gz -- *.html
+ tar -czf $dotdot_outdir/${PACKAGE}.html_node_db.tar.gz -- *.html
)
html_node_db_tgz_size=`calcsize $outdir/${PACKAGE}.html_node_db.tar.gz`
rm -f $outdir/html_node_db/*.html
@@ -253,7 +308,7 @@ if test -n "$docbook"; then
mv $PACKAGE-db.txt $outdir/
cmd="${DOCBOOK2PS} ${outdir}/$PACKAGE-db.xml"
- echo "Generating docbook PS... $(cmd)"
+ echo "Generating docbook PS... ($cmd)"
eval "$cmd"
gzip -f -9 -c $PACKAGE-db.ps >$outdir/$PACKAGE-db.ps.gz
docbook_ps_gz_size=`calcsize $outdir/$PACKAGE-db.ps.gz`
@@ -266,15 +321,24 @@ if test -n "$docbook"; then
mv $PACKAGE-db.pdf $outdir/
fi
-echo Writing index file...
-curdate=`date '+%B %d, %Y'`
+echo "Writing index file..."
+if test -z "$use_texi2html"; then
+ CONDS="/%%IF *HTML_SECTION%%/,/%%ENDIF *HTML_SECTION%%/d;\
+ /%%IF *HTML_CHAPTER%%/,/%%ENDIF *HTML_CHAPTER%%/d"
+else
+ CONDS="/%%ENDIF.*%%/d;/%%IF *HTML_SECTION%%/d;/%%IF *HTML_CHAPTER%%/d"
+fi
+curdate=`$SETLANG date '+%B %d, %Y'`
sed \
-e "s!%%TITLE%%!$MANUAL_TITLE!g" \
- -e "s!%%DATE%%!$curdate!g" \
+ -e "s!%%EMAIL%%!$EMAIL!g" \
-e "s!%%PACKAGE%%!$PACKAGE!g" \
+ -e "s!%%DATE%%!$curdate!g" \
-e "s!%%HTML_MONO_SIZE%%!$html_mono_size!g" \
-e "s!%%HTML_MONO_GZ_SIZE%%!$html_mono_gz_size!g" \
-e "s!%%HTML_NODE_TGZ_SIZE%%!$html_node_tgz_size!g" \
+ -e "s!%%HTML_SECTION_TGZ_SIZE%%!$html_section_tgz_size!g" \
+ -e "s!%%HTML_CHAPTER_TGZ_SIZE%%!$html_chapter_tgz_size!g" \
-e "s!%%INFO_TGZ_SIZE%%!$info_tgz_size!g" \
-e "s!%%DVI_GZ_SIZE%%!$dvi_gz_size!g" \
-e "s!%%PDF_SIZE%%!$pdf_size!g" \
@@ -290,9 +354,10 @@ sed \
-e "s!%%DOCBOOK_XML_GZ_SIZE%%!$docbook_xml_gz_size!g" \
-e "s,%%SCRIPTURL%%,$scripturl,g" \
-e "s!%%SCRIPTNAME%%!$prog!g" \
+ -e "$CONDS" \
$GENDOCS_TEMPLATE_DIR/gendocs_template >$outdir/index.html
-echo "Done! See $outdir/ subdirectory for new files."
+echo "Done, see $outdir/ subdirectory for new files."
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)