X-Git-Url: http://erislabs.net/gitweb/?a=blobdiff_plain;f=build-aux%2Ftexinfo.tex;h=629b88b12bc271528714d33ba02153d249c48769;hb=a539e0a8fe5fc17c2e6c1840ba65cdba897dcef4;hp=da2d3a829091d4ae8859f9bb9ea0d06b6e61f60f;hpb=dfbe1abe1ff6524a1dec20158722b43205067c2a;p=gnulib.git diff --git a/build-aux/texinfo.tex b/build-aux/texinfo.tex index da2d3a829..629b88b12 100644 --- a/build-aux/texinfo.tex +++ b/build-aux/texinfo.tex @@ -3,11 +3,11 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2005-10-10.17} +\def\texinfoversion{2007-03-14.11} % % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, -% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software -% Foundation, Inc. +% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, +% 2007 Free Software Foundation, Inc. % % This texinfo.tex file is free software; you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -67,7 +67,7 @@ \everyjob{\message{[Texinfo version \texinfoversion]}% \catcode`+=\active \catcode`\_=\active} -\message{Basics,} + \chardef\other=12 % We never want plain's \outer definition of \+ in Texinfo. @@ -157,6 +157,18 @@ \chardef\spacecat = 10 \def\spaceisspace{\catcode`\ =\spacecat} +% sometimes characters are active, so we need control sequences. +\chardef\colonChar = `\: +\chardef\commaChar = `\, +\chardef\dashChar = `\- +\chardef\dotChar = `\. +\chardef\exclamChar= `\! +\chardef\lquoteChar= `\` +\chardef\questChar = `\? +\chardef\rquoteChar= `\' +\chardef\semiChar = `\; +\chardef\underChar = `\_ + % Ignore a token. % \def\gobble#1{} @@ -293,6 +305,13 @@ % before the \shipout runs. % \indexdummies % don't expand commands in the output. + \normalturnoffactive % \ in index entries must not stay \, e.g., if + % the page break happens to be in the middle of an example. + % We don't want .vr (or whatever) entries like this: + % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}} + % "\acronym" won't work when it's read back in; + % it needs to be + % {\code {{\tt \backslashcurfont }acronym} \shipout\vbox{% % Do this early so pdf references go to the beginning of the page. \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi @@ -320,9 +339,9 @@ \pagebody{#1}% \ifdim\ht\footlinebox > 0pt % Only leave this space if the footline is nonempty. - % (We lessened \vsize for it in \oddfootingxxx.) + % (We lessened \vsize for it in \oddfootingyyy.) % The \baselineskip=24pt in plain's \makefootline has no effect. - \vskip 2\baselineskip + \vskip 24pt \unvbox\footlinebox \fi % @@ -378,7 +397,7 @@ % \def\parsearg{\parseargusing{}} \def\parseargusing#1#2{% - \def\next{#2}% + \def\argtorun{#2}% \begingroup \obeylines \spaceisspace @@ -409,8 +428,7 @@ \def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{% \def\temp{#3}% \ifx\temp\empty - % We cannot use \next here, as it holds the macro to run; - % thus we reuse \temp. + % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp: \let\temp\finishparsearg \else \let\temp\argcheckspaces @@ -422,14 +440,14 @@ % If a _delimited_ argument is enclosed in braces, they get stripped; so % to get _exactly_ the rest of the line, we had to prevent such situation. % We prepended an \empty token at the very beginning and we expand it now, -% just before passing the control to \next. +% just before passing the control to \argtorun. % (Similarily, we have to think about #3 of \argcheckspacesY above: it is % either the null string, or it ends with \^^M---thus there is no danger % that a pair of braces would be stripped. % % But first, we have to remove the trailing space token. % -\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}} +\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}} % \parseargdef\foo{...} % is roughly equivalent to @@ -1078,15 +1096,24 @@ where each line of input produces a line of output.} \def\minus{$-$} % @dots{} outputs an ellipsis using the current font. -% We do .5em per period so that it has the same spacing in a typewriter -% font as three actual period characters. +% We do .5em per period so that it has the same spacing in the cm +% typewriter fonts as three actual period characters; on the other hand, +% in other typewriter fonts three periods are wider than 1.5em. So do +% whichever is larger. % \def\dots{% \leavevmode - \hbox to 1.5em{% - \hskip 0pt plus 0.25fil - .\hfil.\hfil.% - \hskip 0pt plus 0.5fil + \setbox0=\hbox{...}% get width of three periods + \ifdim\wd0 > 1.5em + \dimen0 = \wd0 + \else + \dimen0 = 1.5em + \fi + \hbox to \dimen0{% + \hskip 0pt plus.25fil + .\hskip 0pt plus1fil + .\hskip 0pt plus1fil + .\hskip 0pt plus.5fil }% } @@ -1198,8 +1225,9 @@ where each line of input produces a line of output.} % To handle parens, we must adopt a different approach, since parens are % not active characters. hyperref.dtx (which has the same problem as -% us) handles it with this amazing macro to replace tokens. I've -% tinkered with it a little for texinfo, but it's definitely from there. +% us) handles it with this amazing macro to replace tokens, with minor +% changes for Texinfo. It is included here under the GPL by permission +% from the author, Heiko Oberdiek. % % #1 is the tokens to replace. % #2 is the replacement. @@ -1228,12 +1256,44 @@ where each line of input produces a line of output.} \HyPsdSubst{)}{\realbackslash)}{#1}% } +\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images +with PDF output, and none of those formats could be found. (.eps cannot +be supported due to the design of the PDF format; use regular TeX (DVI +output) for that.)} + \ifpdf \input pdfcolor - \pdfcatalog{/PageMode /UseOutlines}% + \pdfcatalog{/PageMode /UseOutlines} + % + % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto). \def\dopdfimage#1#2#3{% - \def\imagewidth{#2}% - \def\imageheight{#3}% + \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% + \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% + % + % pdftex (and the PDF format) support .png, .jpg, .pdf (among + % others). Let's try in that order. + \let\pdfimgext=\empty + \begingroup + \openin 1 #1.png \ifeof 1 + \openin 1 #1.jpg \ifeof 1 + \openin 1 #1.jpeg \ifeof 1 + \openin 1 #1.JPG \ifeof 1 + \openin 1 #1.pdf \ifeof 1 + \errhelp = \nopdfimagehelp + \errmessage{Could not find image file #1 for pdf}% + \else \gdef\pdfimgext{pdf}% + \fi + \else \gdef\pdfimgext{JPG}% + \fi + \else \gdef\pdfimgext{jpeg}% + \fi + \else \gdef\pdfimgext{jpg}% + \fi + \else \gdef\pdfimgext{png}% + \fi + \closein 1 + \endgroup + % % without \immediate, pdftex seg faults when the same image is % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.) \ifnum\pdftexversion < 14 @@ -1241,31 +1301,35 @@ where each line of input produces a line of output.} \else \immediate\pdfximage \fi - \ifx\empty\imagewidth\else width \imagewidth \fi - \ifx\empty\imageheight\else height \imageheight \fi + \ifdim \wd0 >0pt width \imagewidth \fi + \ifdim \wd2 >0pt height \imageheight \fi \ifnum\pdftexversion<13 - #1.pdf% + #1.\pdfimgext \else - {#1.pdf}% + {#1.\pdfimgext}% \fi \ifnum\pdftexversion < 14 \else \pdfrefximage \pdflastximage \fi} + % \def\pdfmkdest#1{{% % We have to set dummies so commands such as @code, and characters % such as \, aren't expanded when present in a section title. - \atdummies + \indexnofonts + \turnoffactive \activebackslashdouble + \makevalueexpandable \def\pdfdestname{#1}% \backslashparens\pdfdestname \pdfdest name{\pdfdestname} xyz% - }}% + }} % % used to mark target names; must be expandable. - \def\pdfmkpgn#1{#1}% + \def\pdfmkpgn#1{#1} % \let\linkcolor = \Blue % was Cyan, but that seems light? \def\endlink{\Black\pdfendlink} + % % Adding outlines to PDF; macros for calculating structure of outlines % come from Petr Olsak \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% @@ -1385,9 +1449,17 @@ where each line of input produces a line of output.} \else \let \startlink \pdfstartlink \fi + % make a live url in pdf output. \def\pdfurl#1{% \begingroup - \normalturnoffactive\def\@{@}% + % it seems we really need yet another set of dummies; have not + % tried to figure out what each command should do in the context + % of @url. for now, just make @/ a no-op, that's the only one + % people have actually reported a problem with. + % + \normalturnoffactive + \def\@{@}% + \let\/=\empty \makevalueexpandable \leavevmode\Red \startlink attr{/Border [0 0 0]}% @@ -1457,6 +1529,7 @@ where each line of input produces a line of output.} % We don't need math for this font style. \def\ttsl{\setfontstyle{ttsl}} + % Default leading. \newdimen\textleading \textleading = 13.2pt @@ -1478,11 +1551,13 @@ where each line of input produces a line of output.} }% } + % Set the font macro #1 to the font named #2, adding on the % specified font prefix (normally `cm'). % #3 is the font's design size, #4 is a scale factor \def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4} + % Use cm as the default font prefix. % To specify the font prefix, you must define \fontprefix % before you read in texinfo.tex. @@ -1506,6 +1581,10 @@ where each line of input produces a line of output.} \def\scshape{csc} \def\scbshape{csc} +% Definitions for a main text size of 11pt. This is the default in +% Texinfo. +% +\def\definetextfontsizexi{% % Text fonts (11.2pt, magstep1). \def\textnominalsize{11pt} \edef\mainmagstep{\magstephalf} @@ -1619,6 +1698,165 @@ where each line of input produces a line of output.} \font\reducedi=cmmi10 \font\reducedsy=cmsy10 +% reset the current fonts +\textfonts +\rm +} % end of 11pt text font size definitions + + +% Definitions to make the main text be 10pt Computer Modern, with +% section, chapter, etc., sizes following suit. This is for the GNU +% Press printing of the Emacs 22 manual. Maybe other manuals in the +% future. Used with @smallbook, which sets the leading to 12pt. +% +\def\definetextfontsizex{% +% Text fonts (10pt). +\def\textnominalsize{10pt} +\edef\mainmagstep{1000} +\setfont\textrm\rmshape{10}{\mainmagstep} +\setfont\texttt\ttshape{10}{\mainmagstep} +\setfont\textbf\bfshape{10}{\mainmagstep} +\setfont\textit\itshape{10}{\mainmagstep} +\setfont\textsl\slshape{10}{\mainmagstep} +\setfont\textsf\sfshape{10}{\mainmagstep} +\setfont\textsc\scshape{10}{\mainmagstep} +\setfont\textttsl\ttslshape{10}{\mainmagstep} +\font\texti=cmmi10 scaled \mainmagstep +\font\textsy=cmsy10 scaled \mainmagstep + +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstephalf} +\setfont\deftt\ttshape{10}{\magstephalf} +\setfont\defttsl\ttslshape{10}{\magstephalf} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} + +% Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} +\setfont\smallrm\rmshape{9}{1000} +\setfont\smalltt\ttshape{9}{1000} +\setfont\smallbf\bfshape{10}{900} +\setfont\smallit\itshape{9}{1000} +\setfont\smallsl\slshape{9}{1000} +\setfont\smallsf\sfshape{9}{1000} +\setfont\smallsc\scshape{10}{900} +\setfont\smallttsl\ttslshape{10}{900} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 + +% Fonts for small examples (8pt). +\def\smallernominalsize{8pt} +\setfont\smallerrm\rmshape{8}{1000} +\setfont\smallertt\ttshape{8}{1000} +\setfont\smallerbf\bfshape{10}{800} +\setfont\smallerit\itshape{8}{1000} +\setfont\smallersl\slshape{8}{1000} +\setfont\smallersf\sfshape{8}{1000} +\setfont\smallersc\scshape{10}{800} +\setfont\smallerttsl\ttslshape{10}{800} +\font\smalleri=cmmi8 +\font\smallersy=cmsy8 + +% Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} +\setfont\titlerm\rmbshape{12}{\magstep3} +\setfont\titleit\itbshape{10}{\magstep4} +\setfont\titlesl\slbshape{10}{\magstep4} +\setfont\titlett\ttbshape{12}{\magstep3} +\setfont\titlettsl\ttslshape{10}{\magstep4} +\setfont\titlesf\sfbshape{17}{\magstep1} +\let\titlebf=\titlerm +\setfont\titlesc\scbshape{10}{\magstep4} +\font\titlei=cmmi12 scaled \magstep3 +\font\titlesy=cmsy10 scaled \magstep4 +\def\authorrm{\secrm} +\def\authortt{\sectt} + +% Chapter fonts (14.4pt). +\def\chapnominalsize{14pt} +\setfont\chaprm\rmbshape{12}{\magstep1} +\setfont\chapit\itbshape{10}{\magstep2} +\setfont\chapsl\slbshape{10}{\magstep2} +\setfont\chaptt\ttbshape{12}{\magstep1} +\setfont\chapttsl\ttslshape{10}{\magstep2} +\setfont\chapsf\sfbshape{12}{\magstep1} +\let\chapbf\chaprm +\setfont\chapsc\scbshape{10}{\magstep2} +\font\chapi=cmmi12 scaled \magstep1 +\font\chapsy=cmsy10 scaled \magstep2 + +% Section fonts (12pt). +\def\secnominalsize{12pt} +\setfont\secrm\rmbshape{12}{1000} +\setfont\secit\itbshape{10}{\magstep1} +\setfont\secsl\slbshape{10}{\magstep1} +\setfont\sectt\ttbshape{12}{1000} +\setfont\secttsl\ttslshape{10}{\magstep1} +\setfont\secsf\sfbshape{12}{1000} +\let\secbf\secrm +\setfont\secsc\scbshape{10}{\magstep1} +\font\seci=cmmi12 +\font\secsy=cmsy10 scaled \magstep1 + +% Subsection fonts (10pt). +\def\ssecnominalsize{10pt} +\setfont\ssecrm\rmbshape{10}{1000} +\setfont\ssecit\itbshape{10}{1000} +\setfont\ssecsl\slbshape{10}{1000} +\setfont\ssectt\ttbshape{10}{1000} +\setfont\ssecttsl\ttslshape{10}{1000} +\setfont\ssecsf\sfbshape{10}{1000} +\let\ssecbf\ssecrm +\setfont\ssecsc\scbshape{10}{1000} +\font\sseci=cmmi10 +\font\ssecsy=cmsy10 + +% Reduced fonts for @acro in text (9pt). +\def\reducednominalsize{9pt} +\setfont\reducedrm\rmshape{9}{1000} +\setfont\reducedtt\ttshape{9}{1000} +\setfont\reducedbf\bfshape{10}{900} +\setfont\reducedit\itshape{9}{1000} +\setfont\reducedsl\slshape{9}{1000} +\setfont\reducedsf\sfshape{9}{1000} +\setfont\reducedsc\scshape{10}{900} +\setfont\reducedttsl\ttslshape{10}{900} +\font\reducedi=cmmi9 +\font\reducedsy=cmsy9 + +% reduce space between paragraphs +\divide\parskip by 2 + +% reset the current fonts +\textfonts +\rm +} % end of 10pt text font size definitions + + +% We provide the user-level command +% @fonttextsize 10 +% (or 11) to redefine the text font size. pt is assumed. +% +\def\xword{10} +\def\xiword{11} +% +\parseargdef\fonttextsize{% + \def\textsizearg{#1}% + \wlog{doing @fonttextsize \textsizearg}% + % + % Set \globaldefs so that documents can use this inside @tex, since + % makeinfo 4.8 does not support it, but we need it nonetheless. + % + \begingroup \globaldefs=1 + \ifx\textsizearg\xword \definetextfontsizex + \else \ifx\textsizearg\xiword \definetextfontsizexi + \else + \errhelp=\EMsimple + \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'} + \fi\fi + \endgroup +} + + % In order for the font changes to affect most math symbols and letters, % we have to define the \textfont of the standard families. Since % texinfo doesn't allow for producing subscripts and superscripts except @@ -1729,7 +1967,7 @@ where each line of input produces a line of output.} % Set up the default fonts, so we can use them for creating boxes. % -\textfonts \rm +\definetextfontsizexi % Define these so they can be easily changed for other fonts. \def\angleleft{$\langle$} @@ -1786,13 +2024,6 @@ where each line of input produces a line of output.} % Can't use plain's \frenchspacing because it uses the `\x notation, and % sometimes \x has an active definition that messes things up. % -\chardef\colonChar = `\: -\chardef\commaChar = `\, -\chardef\dotChar = `\. -\chardef\exclamChar= `\! -\chardef\questChar = `\? -\chardef\semiChar = `\; -% \catcode`@=11 \def\plainfrenchspacing{% \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m @@ -1820,6 +2051,7 @@ where each line of input produces a line of output.} \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% \kern-0.4pt\hrule}% \kern-.06em\raise0.4pt\hbox{\angleright}}}} +\def\key #1{{\nohyphenation \uppercase{#1}}\null} % The old definition, with no lozenge: %\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null} \def\ctrl #1{{\tt \rawbackslash \hat}#1} @@ -1861,11 +2093,14 @@ where each line of input produces a line of output.} % and arrange explicitly to hyphenate at a dash. % -- rms. { - \catcode`\-=\active - \catcode`\_=\active + \catcode`\-=\active \catcode`\_=\active + \catcode`\'=\active \catcode`\`=\active % \global\def\code{\begingroup - \catcode`\-=\active \catcode`\_=\active + \catcode\rquoteChar=\active \catcode\lquoteChar=\active + \let'\codequoteright \let`\codequoteleft + % + \catcode\dashChar=\active \catcode\underChar=\active \ifallowcodebreaks \let-\codedash \let_\codeunder @@ -2111,6 +2346,10 @@ where each line of input produces a line of output.} }$% } +% @textdegree - the normal degrees sign. +% +\def\textdegree{$^\circ$} + % Laurent Siebenmann reports \Orb undefined with: % Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 % so we'll define it if necessary. @@ -2282,8 +2521,8 @@ where each line of input produces a line of output.} % % Leave some space for the footline. Hopefully ok to assume % @evenfooting will not be used by itself. - \global\advance\pageheight by -\baselineskip - \global\advance\vsize by -\baselineskip + \global\advance\pageheight by -12pt + \global\advance\vsize by -12pt } \parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}} @@ -2942,6 +3181,7 @@ where each line of input produces a line of output.} \def\doignore#1{\begingroup % Scan in ``verbatim'' mode: + \obeylines \catcode`\@ = \other \catcode`\{ = \other \catcode`\} = \other @@ -2962,16 +3202,16 @@ where each line of input produces a line of output.} \gdef\dodoignore#1{% % #1 contains the command name as a string, e.g., `ifinfo'. % - % Define a command to find the next `@end #1', which must be on a line - % by itself. - \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}% + % Define a command to find the next `@end #1'. + \long\def\doignoretext##1^^M@end #1{% + \doignoretextyyy##1^^M@#1\_STOP_}% + % % And this command to find another #1 command, at the beginning of a % line. (Otherwise, we would consider a line `@c @ifset', for % example, to count as an @ifset for nesting.) \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}% % % And now expand that command. - \obeylines % \doignoretext ^^M% }% } @@ -3001,7 +3241,12 @@ where each line of input produces a line of output.} } % Finish off ignored text. -\def\enddoignore{\endgroup\ignorespaces} +{ \obeylines% + % Ignore anything after the last `@end #1'; this matters in verbatim + % environments, where otherwise the newline after an ignored conditional + % would result in a blank line in the output. + \gdef\enddoignore#1^^M{\endgroup\ignorespaces}% +} % @set VAR sets the variable VAR to an empty value. @@ -3204,12 +3449,39 @@ where each line of input produces a line of output.} \escapechar = `\\ % use backslash in output files. \def\@{@}% change to @@ when we switch to @ as escape char in index files. \def\ {\realbackslash\space }% + % % Need these in case \tex is in effect and \{ is a \delimiter again. % But can't use \lbracecmd and \rbracecmd because texindex assumes % braces and backslashes are used only as delimiters. \let\{ = \mylbrace \let\} = \myrbrace % + % I don't entirely understand this, but when an index entry is + % generated from a macro call, the \endinput which \scanmacro inserts + % causes processing to be prematurely terminated. This is, + % apparently, because \indexsorttmp is fully expanded, and \endinput + % is an expandable command. The redefinition below makes \endinput + % disappear altogether for that purpose -- although logging shows that + % processing continues to some further point. On the other hand, it + % seems \endinput does not hurt in the printed index arg, since that + % is still getting written without apparent harm. + % + % Sample source (mac-idx3.tex, reported by Graham Percival to + % help-texinfo, 22may06): + % @macro funindex {WORD} + % @findex xyz + % @end macro + % ... + % @funindex commtest + % + % The above is not enough to reproduce the bug, but it gives the flavor. + % + % Sample whatsit resulting: + % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}} + % + % So: + \let\endinput = \empty + % % Do the redefinitions. \commondummies } @@ -3301,6 +3573,7 @@ where each line of input produces a line of output.} \definedummyword\point \definedummyword\print \definedummyword\result + \definedummyword\textdegree % % We want to disable all macros so that they are not expanded by \write. \macrolist @@ -3434,6 +3707,7 @@ where each line of input produces a line of output.} \def\point{.}% \def\print{-|}% \def\result{=>}% + \def\textdegree{degrees}% % % We need to get rid of all macros, leaving only the arguments (if present). % Of course this is not nearly correct, but it is the best we can do for now. @@ -3782,9 +4056,9 @@ where each line of input produces a line of output.} \endgroup } -% Like \dotfill except takes at least 1 em. +% Like plain.tex's \dotfill, except uses up at least 1 em. \def\indexdotfill{\cleaders - \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill} + \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill} \def\primary #1{\line{#1\hfil}} @@ -3894,6 +4168,34 @@ where each line of input produces a line of output.} % % All done with double columns. \def\enddoublecolumns{% + % The following penalty ensures that the page builder is exercised + % _before_ we change the output routine. This is necessary in the + % following situation: + % + % The last section of the index consists only of a single entry. + % Before this section, \pagetotal is less than \pagegoal, so no + % break occurs before the last section starts. However, the last + % section, consisting of \initial and the single \entry, does not + % fit on the page and has to be broken off. Without the following + % penalty the page builder will not be exercised until \eject + % below, and by that time we'll already have changed the output + % routine to the \balancecolumns version, so the next-to-last + % double-column page will be processed with \balancecolumns, which + % is wrong: The two columns will go to the main vertical list, with + % the broken-off section in the recent contributions. As soon as + % the output routine finishes, TeX starts reconsidering the page + % break. The two columns and the broken-off section both fit on the + % page, because the two columns now take up only half of the page + % goal. When TeX sees \eject from below which follows the final + % section, it invokes the new output routine that we've set after + % \balancecolumns below; \onepageout will try to fit the two columns + % and the final section into the vbox of \pageheight (see + % \pagebody), causing an overfull box. + % + % Note that glue won't work here, because glue does not exercise the + % page builder, unlike penalties (see The TeXbook, pp. 280-281). + \penalty0 + % \output = {% % Split the last of the double-column material. Leave it on the % current page, no automatic page break. @@ -4358,14 +4660,17 @@ where each line of input produces a line of output.} \ifx\temptype\Ynothingkeyword \setbox0 = \hbox{}% \def\toctype{unnchap}% + \gdef\thischapternum{}% \gdef\thischapter{#1}% \else\ifx\temptype\Yomitfromtockeyword \setbox0 = \hbox{}% contents like unnumbered, but no toc entry \def\toctype{omit}% + \gdef\thischapternum{}% \gdef\thischapter{}% \else\ifx\temptype\Yappendixkeyword \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% \def\toctype{app}% + \xdef\thischapternum{\appendixletter}% % We don't substitute the actual chapter name into \thischapter % because we don't want its macros evaluated now. And we don't % use \thissection because that changes with each section. @@ -4375,6 +4680,7 @@ where each line of input produces a line of output.} \else \setbox0 = \hbox{#3\enspace}% \def\toctype{numchap}% + \xdef\thischapternum{\the\chapno}% \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}% \fi\fi\fi @@ -4486,13 +4792,21 @@ where each line of input produces a line of output.} \gdef\thissection{#1}% \fi\fi\fi % - % Write the toc entry (before \donoderef). See comments in \chfplain. + % Write the toc entry (before \donoderef). See comments in \chapmacro. \writetocentry{\toctype\sectionlevel}{#1}{#4}% % % Write the node reference (= pdf destination for pdftex). - % Again, see comments in \chfplain. + % Again, see comments in \chapmacro. \donoderef{#3}% % + % Interline glue will be inserted when the vbox is completed. + % That glue will be a valid breakpoint for the page, since it'll be + % preceded by a whatsit (usually from the \donoderef, or from the + % \writetocentry if there was no node). We don't want to allow that + % break, since then the whatsits could end up on page n while the + % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000. + \nobreak + % % Output the actual section heading. \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright \hangindent=\wd0 % zero if no section number @@ -4555,7 +4869,7 @@ where each line of input produces a line of output.} \edef\temp{% \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}% \temp - } + }% \fi \fi % @@ -4807,7 +5121,7 @@ where each line of input produces a line of output.} {\tentt \global\dimen0 = 3em}% Width of the box. \dimen2 = .55pt % Thickness of rules % The text. (`r' is open on the right, `e' somewhat less so on the left.) -\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt} +\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt} % \setbox\errorbox=\hbox to \dimen0{\hfil \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. @@ -4998,12 +5312,18 @@ where each line of input produces a line of output.} \let\SETdispenvsize\relax \def\setnormaldispenv{% \ifx\SETdispenvsize\smallword + % end paragraph for sake of leading, in case document has no blank + % line. This is redundant with what happens in \aboveenvbreak, but + % we need to do it before changing the fonts, and it's inconvenient + % to change the fonts afterward. + \ifnum \lastpenalty=10000 \else \endgraf \fi \smallexamplefonts \rm \fi } \def\setsmalldispenv{% \ifx\SETdispenvsize\nosmallword \else + \ifnum \lastpenalty=10000 \else \endgraf \fi \smallexamplefonts \rm \fi } @@ -5030,11 +5350,10 @@ where each line of input produces a line of output.} % \maketwodispenvs {lisp}{example}{% \nonfillstart - \tt + \tt\quoteexpand \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. \gobble % eat return } - % @display/@smalldisplay: same as @lisp except keep current font. % \makedispenv {display}{% @@ -5162,6 +5481,34 @@ where each line of input produces a line of output.} \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount % \def\starttabbox{\setbox0=\hbox\bgroup} + +% Allow an option to not replace quotes with a regular directed right +% quote/apostrophe (char 0x27), but instead use the undirected quote +% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it +% the default, but it works for pasting with more pdf viewers (at least +% evince), the lilypond developers report. xpdf does work with the +% regular 0x27. +% +\def\codequoteright{% + \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax + '% + \else + \char'15 + \fi +} +% +% and a similar option for the left quote char vs. a grave accent. +% Modern fonts display ASCII 0x60 as a grave accent, so some people like +% the code environments to do likewise. +% +\def\codequoteleft{% + \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax + `% + \else + \char'22 + \fi +} +% \begingroup \catcode`\^^I=\active \gdef\tabexpand{% @@ -5174,7 +5521,16 @@ where each line of input produces a line of output.} \wd0=\dimen0 \box0 \starttabbox }% } + \catcode`\'=\active + \gdef\rquoteexpand{\catcode\rquoteChar=\active \def'{\codequoteright}}% + % + \catcode`\`=\active + \gdef\lquoteexpand{\catcode\lquoteChar=\active \def`{\codequoteleft}}% + % + \gdef\quoteexpand{\rquoteexpand \lquoteexpand}% \endgroup + +% start the verbatim environment. \def\setupverbatim{% \let\nonarrowing = t% \nonfillstart @@ -5183,6 +5539,7 @@ where each line of input produces a line of output.} \def\par{\leavevmode\egroup\box0\endgraf}% \catcode`\`=\active \tabexpand + \quoteexpand % Respect line breaks, % print special symbols as themselves, and % make each space count @@ -5267,6 +5624,7 @@ where each line of input produces a line of output.} \endgroup } + \message{defuns,} % @defun etc. @@ -5632,7 +5990,6 @@ where each line of input produces a line of output.} \spaceisspace % % Append \endinput to make sure that TeX does not see the ending newline. - % % I've verified that it is necessary both for e-TeX and for ordinary TeX % --kasal, 29nov03 \scantokens{#1\endinput}% @@ -5899,11 +6256,11 @@ where each line of input produces a line of output.} % {. If so it reads up to the closing }, if not, it reads the whole % line. Whatever was read is then fed to the next control sequence % as an argument (by \parsebrace or \parsearg) -\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx} +\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx} \def\braceorlinexxx{% \ifx\nchar\bgroup\else \expandafter\parsearg - \fi \next} + \fi \macnamexxx} % @alias. @@ -5924,7 +6281,6 @@ where each line of input produces a line of output.} \message{cross references,} \newwrite\auxfile - \newif\ifhavexrefs % True if xref values are known. \newif\ifwarnedxrefs % True if we warned once that they aren't known. @@ -6037,7 +6393,8 @@ where each line of input produces a line of output.} \ifpdf \leavevmode \getfilename{#4}% - {\turnoffactive + {\indexnofonts + \turnoffactive % See comments at \activebackslashdouble. {\activebackslashdouble \xdef\pdfxrefdest{#1}% \backslashparens\pdfxrefdest}% @@ -6184,10 +6541,18 @@ where each line of input produces a line of output.} % collisions). But if this is a float type, we have more work to do. % \def\xrdef#1#2{% - \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value. + {% The node name might contain 8-bit characters, which in our current + % implementation are changed to commands like @'e. Don't let these + % mess up the control sequence name. + \indexnofonts + \turnoffactive + \xdef\safexrefname{#1}% + }% + % + \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref % % Was that xref control sequence that we just defined for a float? - \expandafter\iffloat\csname XR#1\endcsname + \expandafter\iffloat\csname XR\safexrefname\endcsname % it was a float, and we have the (safe) float type in \iffloattype. \expandafter\let\expandafter\floatlist \csname floatlist\iffloattype\endcsname @@ -6202,7 +6567,8 @@ where each line of input produces a line of output.} % % Remember this xref in the control sequence \floatlistFLOATTYPE, % for later use in \listoffloats. - \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}% + \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0 + {\safexrefname}}% \fi } @@ -6306,6 +6672,7 @@ where each line of input produces a line of output.} \input\jobname.#1 \endgroup} + \message{insertions,} % including footnotes. @@ -6498,7 +6865,7 @@ where each line of input produces a line of output.} % above and below. \nobreak\vskip\parskip \nobreak - \line\bgroup\hss + \line\bgroup \fi % % Output the image. @@ -6511,7 +6878,7 @@ where each line of input produces a line of output.} \epsfbox{#1.eps}% \fi % - \ifimagevmode \hss \egroup \bigbreak \fi % space after the image + \ifimagevmode \egroup \bigbreak \fi % space after the image \endgroup} @@ -6780,8 +7147,8 @@ where each line of input produces a line of output.} \writeentry }} + \message{localization,} -% and i18n. % @documentlanguage is usually given very early, just after % @setfilename. If done too late, it may not override everything @@ -6805,14 +7172,809 @@ where each line of input produces a line of output.} is empty. Maybe you need to install it? In the current directory should work if nowhere else does.} +% Set the catcode of characters 128 through 255 to the specified number. +% +\def\setnonasciicharscatcode#1{% + \count255=128 + \loop\ifnum\count255<256 + \global\catcode\count255=#1 + \advance\count255 by 1 + \repeat +} -% @documentencoding should change something in TeX eventually, most -% likely, but for now just recognize it. -\let\documentencoding = \comment +% @documentencoding sets the definition of non-ASCII characters +% according to the specified encoding. +% +\parseargdef\documentencoding{% + % Encoding being declared for the document. + \def\declaredencoding{\csname #1.enc\endcsname}% + % + % Supported encodings: names converted to tokens in order to be able + % to compare them with \ifx. + \def\ascii{\csname US-ASCII.enc\endcsname}% + \def\latnine{\csname ISO-8859-15.enc\endcsname}% + \def\latone{\csname ISO-8859-1.enc\endcsname}% + \def\lattwo{\csname ISO-8859-2.enc\endcsname}% + \def\utfeight{\csname UTF-8.enc\endcsname}% + % + \ifx \declaredencoding \ascii + \asciichardefs + % + \else \ifx \declaredencoding \lattwo + \setnonasciicharscatcode\active + \lattwochardefs + % + \else \ifx \declaredencoding \latone + \setnonasciicharscatcode\active + \latonechardefs + % + \else \ifx \declaredencoding \latnine + \setnonasciicharscatcode\active + \latninechardefs + % + \else \ifx \declaredencoding \utfeight + \setnonasciicharscatcode\active + \utfeightchardefs + % + \else + \message{Unknown document encoding #1, ignoring.}% + % + \fi % utfeight + \fi % latnine + \fi % latone + \fi % lattwo + \fi % ascii +} +% A message to be logged when using a character that isn't available +% the default font encoding (OT1). +% +\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}} + +% Take account of \c (plain) vs. \, (Texinfo) difference. +\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi} + +% First, make active non-ASCII characters in order for them to be +% correctly categorized when TeX reads the replacement text of +% macros containing the character definitions. +\setnonasciicharscatcode\active +% +% Latin1 (ISO-8859-1) character definitions. +\def\latonechardefs{% + \gdef^^a0{~} + \gdef^^a1{\exclamdown} + \gdef^^a2{\missingcharmsg{CENT SIGN}} + \gdef^^a3{{\pounds}} + \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} + \gdef^^a5{\missingcharmsg{YEN SIGN}} + \gdef^^a6{\missingcharmsg{BROKEN BAR}} + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\copyright} + \gdef^^aa{\ordf} + \gdef^^ab{\missingcharmsg{LEFT-POINTING DOUBLE ANGLE QUOTATION MARK}} + \gdef^^ac{$\lnot$} + \gdef^^ad{\-} + \gdef^^ae{\registeredsymbol} + \gdef^^af{\={}} + % + \gdef^^b0{\textdegree} + \gdef^^b1{$\pm$} + \gdef^^b2{$^2$} + \gdef^^b3{$^3$} + \gdef^^b4{\'{}} + \gdef^^b5{$\mu$} + \gdef^^b6{\P} + % + \gdef^^b7{$^.$} + \gdef^^b8{\cedilla\ } + \gdef^^b9{$^1$} + \gdef^^ba{\ordm} + % + \gdef^^bb{\missingcharmsg{RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK}} + \gdef^^bc{$1\over4$} + \gdef^^bd{$1\over2$} + \gdef^^be{$3\over4$} + \gdef^^bf{\questiondown} + % + \gdef^^c0{\`A} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\~A} + \gdef^^c4{\"A} + \gdef^^c5{\ringaccent A} + \gdef^^c6{\AE} + \gdef^^c7{\cedilla C} + \gdef^^c8{\`E} + \gdef^^c9{\'E} + \gdef^^ca{\^E} + \gdef^^cb{\"E} + \gdef^^cc{\`I} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\"I} + % + \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER ETH}} + \gdef^^d1{\~N} + \gdef^^d2{\`O} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\~O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\O} + \gdef^^d9{\`U} + \gdef^^da{\'U} + \gdef^^db{\^U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\missingcharmsg{LATIN CAPITAL LETTER THORN}} + \gdef^^df{\ss} + % + \gdef^^e0{\`a} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\~a} + \gdef^^e4{\"a} + \gdef^^e5{\ringaccent a} + \gdef^^e6{\ae} + \gdef^^e7{\cedilla c} + \gdef^^e8{\`e} + \gdef^^e9{\'e} + \gdef^^ea{\^e} + \gdef^^eb{\"e} + \gdef^^ec{\`{\dotless i}} + \gdef^^ed{\'{\dotless i}} + \gdef^^ee{\^{\dotless i}} + \gdef^^ef{\"{\dotless i}} + % + \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER ETH}} + \gdef^^f1{\~n} + \gdef^^f2{\`o} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\~o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\o} + \gdef^^f9{\`u} + \gdef^^fa{\'u} + \gdef^^fb{\^u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\missingcharmsg{LATIN SMALL LETTER THORN}} + \gdef^^ff{\"y} +} + +% Latin9 (ISO-8859-15) encoding character definitions. +\def\latninechardefs{% + % Encoding is almost identical to Latin1. + \latonechardefs + % + \gdef^^a4{\euro} + \gdef^^a6{\v S} + \gdef^^a8{\v s} + \gdef^^b4{\v Z} + \gdef^^b8{\v z} + \gdef^^bc{\OE} + \gdef^^bd{\oe} + \gdef^^be{\"Y} +} + +% Latin2 (ISO-8859-2) character definitions. +\def\lattwochardefs{% + \gdef^^a0{~} + \gdef^^a1{\missingcharmsg{LATIN CAPITAL LETTER A WITH OGONEK}} + \gdef^^a2{\u{}} + \gdef^^a3{\L} + \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} + \gdef^^a5{\v L} + \gdef^^a6{\'S} + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\v S} + \gdef^^aa{\cedilla S} + \gdef^^ab{\v T} + \gdef^^ac{\'Z} + \gdef^^ad{\-} + \gdef^^ae{\v Z} + \gdef^^af{\dotaccent Z} + % + \gdef^^b0{\textdegree} + \gdef^^b1{\missingcharmsg{LATIN SMALL LETTER A WITH OGONEK}} + \gdef^^b2{\missingcharmsg{OGONEK}} + \gdef^^b3{\l} + \gdef^^b4{\'{}} + \gdef^^b5{\v l} + \gdef^^b6{\'s} + \gdef^^b7{\v{}} + \gdef^^b8{\cedilla\ } + \gdef^^b9{\v s} + \gdef^^ba{\cedilla s} + \gdef^^bb{\v t} + \gdef^^bc{\'z} + \gdef^^bd{\H{}} + \gdef^^be{\v z} + \gdef^^bf{\dotaccent z} + % + \gdef^^c0{\'R} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\u A} + \gdef^^c4{\"A} + \gdef^^c5{\'L} + \gdef^^c6{\'C} + \gdef^^c7{\cedilla C} + \gdef^^c8{\v C} + \gdef^^c9{\'E} + \gdef^^ca{\missingcharmsg{LATIN CAPITAL LETTER E WITH OGONEK}} + \gdef^^cb{\"E} + \gdef^^cc{\v E} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\v D} + % + \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER D WITH STROKE}} + \gdef^^d1{\'N} + \gdef^^d2{\v N} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\H O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\v R} + \gdef^^d9{\ringaccent U} + \gdef^^da{\'U} + \gdef^^db{\H U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\cedilla T} + \gdef^^df{\ss} + % + \gdef^^e0{\'r} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\u a} + \gdef^^e4{\"a} + \gdef^^e5{\'l} + \gdef^^e6{\'c} + \gdef^^e7{\cedilla c} + \gdef^^e8{\v c} + \gdef^^e9{\'e} + \gdef^^ea{\missingcharmsg{LATIN SMALL LETTER E WITH OGONEK}} + \gdef^^eb{\"e} + \gdef^^ec{\v e} + \gdef^^ed{\'\i} + \gdef^^ee{\^\i} + \gdef^^ef{\v d} + % + \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER D WITH STROKE}} + \gdef^^f1{\'n} + \gdef^^f2{\v n} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\H o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\v r} + \gdef^^f9{\ringaccent u} + \gdef^^fa{\'u} + \gdef^^fb{\H u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\cedilla t} + \gdef^^ff{\dotaccent{}} +} + +% UTF-8 character definitions. +% +% This code to support UTF-8 is based on LaTeX's utf8.def, with some +% changes for Texinfo conventions. It is included here under the GPL by +% permission from Frank Mittelbach and the LaTeX team. +% +\newcount\countUTFx +\newcount\countUTFy +\newcount\countUTFz -% Page size parameters. +\gdef\UTFviiiTwoOctets#1#2{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\endcsname} % +\gdef\UTFviiiThreeOctets#1#2#3{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname} +% +\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname} + +\gdef\UTFviiiDefined#1{% + \ifx #1\relax + \message{\linenumber Unicode char \string #1 not defined for Texinfo}% + \else + \expandafter #1% + \fi +} + +\begingroup + \catcode`\~13 + \catcode`\"12 + + \def\UTFviiiLoop{% + \global\catcode\countUTFx\active + \uccode`\~\countUTFx + \uppercase\expandafter{\UTFviiiTmp}% + \advance\countUTFx by 1 + \ifnum\countUTFx < \countUTFy + \expandafter\UTFviiiLoop + \fi} + + \countUTFx = "C2 + \countUTFy = "E0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiTwoOctets\string~}} + \UTFviiiLoop + + \countUTFx = "E0 + \countUTFy = "F0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiThreeOctets\string~}} + \UTFviiiLoop + + \countUTFx = "F0 + \countUTFy = "F4 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiFourOctets\string~}} + \UTFviiiLoop +\endgroup + +\begingroup + \catcode`\"=12 + \catcode`\<=12 + \catcode`\.=12 + \catcode`\,=12 + \catcode`\;=12 + \catcode`\!=12 + \catcode`\~=13 + + \gdef\DeclareUnicodeCharacter#1#2{% + \countUTFz = "#1\relax + \wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% + \begingroup + \parseXMLCharref + \def\UTFviiiTwoOctets##1##2{% + \csname u8:##1\string ##2\endcsname}% + \def\UTFviiiThreeOctets##1##2##3{% + \csname u8:##1\string ##2\string ##3\endcsname}% + \def\UTFviiiFourOctets##1##2##3##4{% + \csname u8:##1\string ##2\string ##3\string ##4\endcsname}% + \expandafter\expandafter\expandafter\expandafter + \expandafter\expandafter\expandafter + \gdef\UTFviiiTmp{#2}% + \endgroup} + + \gdef\parseXMLCharref{% + \ifnum\countUTFz < "A0\relax + \errhelp = \EMsimple + \errmessage{Cannot define Unicode char value < 00A0}% + \else\ifnum\countUTFz < "800\relax + \parseUTFviiiA,% + \parseUTFviiiB C\UTFviiiTwoOctets.,% + \else\ifnum\countUTFz < "10000\relax + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiB E\UTFviiiThreeOctets.{,;}% + \else + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiA!% + \parseUTFviiiB F\UTFviiiFourOctets.{!,;}% + \fi\fi\fi + } + + \gdef\parseUTFviiiA#1{% + \countUTFx = \countUTFz + \divide\countUTFz by 64 + \countUTFy = \countUTFz + \multiply\countUTFz by 64 + \advance\countUTFx by -\countUTFz + \advance\countUTFx by 128 + \uccode `#1\countUTFx + \countUTFz = \countUTFy} + + \gdef\parseUTFviiiB#1#2#3#4{% + \advance\countUTFz by "#10\relax + \uccode `#3\countUTFz + \uppercase{\gdef\UTFviiiTmp{#2#3#4}}} +\endgroup + +\def\utfeightchardefs{% + \DeclareUnicodeCharacter{00A0}{\tie} + \DeclareUnicodeCharacter{00A1}{\exclamdown} + \DeclareUnicodeCharacter{00A3}{\pounds} + \DeclareUnicodeCharacter{00A8}{\"{ }} + \DeclareUnicodeCharacter{00A9}{\copyright} + \DeclareUnicodeCharacter{00AA}{\ordf} + \DeclareUnicodeCharacter{00AD}{\-} + \DeclareUnicodeCharacter{00AE}{\registeredsymbol} + \DeclareUnicodeCharacter{00AF}{\={ }} + + \DeclareUnicodeCharacter{00B0}{\ringaccent{ }} + \DeclareUnicodeCharacter{00B4}{\'{ }} + \DeclareUnicodeCharacter{00B8}{\cedilla{ }} + \DeclareUnicodeCharacter{00BA}{\ordm} + \DeclareUnicodeCharacter{00BF}{\questiondown} + + \DeclareUnicodeCharacter{00C0}{\`A} + \DeclareUnicodeCharacter{00C1}{\'A} + \DeclareUnicodeCharacter{00C2}{\^A} + \DeclareUnicodeCharacter{00C3}{\~A} + \DeclareUnicodeCharacter{00C4}{\"A} + \DeclareUnicodeCharacter{00C5}{\AA} + \DeclareUnicodeCharacter{00C6}{\AE} + \DeclareUnicodeCharacter{00C7}{\cedilla{C}} + \DeclareUnicodeCharacter{00C8}{\`E} + \DeclareUnicodeCharacter{00C9}{\'E} + \DeclareUnicodeCharacter{00CA}{\^E} + \DeclareUnicodeCharacter{00CB}{\"E} + \DeclareUnicodeCharacter{00CC}{\`I} + \DeclareUnicodeCharacter{00CD}{\'I} + \DeclareUnicodeCharacter{00CE}{\^I} + \DeclareUnicodeCharacter{00CF}{\"I} + + \DeclareUnicodeCharacter{00D1}{\~N} + \DeclareUnicodeCharacter{00D2}{\`O} + \DeclareUnicodeCharacter{00D3}{\'O} + \DeclareUnicodeCharacter{00D4}{\^O} + \DeclareUnicodeCharacter{00D5}{\~O} + \DeclareUnicodeCharacter{00D6}{\"O} + \DeclareUnicodeCharacter{00D8}{\O} + \DeclareUnicodeCharacter{00D9}{\`U} + \DeclareUnicodeCharacter{00DA}{\'U} + \DeclareUnicodeCharacter{00DB}{\^U} + \DeclareUnicodeCharacter{00DC}{\"U} + \DeclareUnicodeCharacter{00DD}{\'Y} + \DeclareUnicodeCharacter{00DF}{\ss} + + \DeclareUnicodeCharacter{00E0}{\`a} + \DeclareUnicodeCharacter{00E1}{\'a} + \DeclareUnicodeCharacter{00E2}{\^a} + \DeclareUnicodeCharacter{00E3}{\~a} + \DeclareUnicodeCharacter{00E4}{\"a} + \DeclareUnicodeCharacter{00E5}{\aa} + \DeclareUnicodeCharacter{00E6}{\ae} + \DeclareUnicodeCharacter{00E7}{\cedilla{c}} + \DeclareUnicodeCharacter{00E8}{\`e} + \DeclareUnicodeCharacter{00E9}{\'e} + \DeclareUnicodeCharacter{00EA}{\^e} + \DeclareUnicodeCharacter{00EB}{\"e} + \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}} + \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}} + \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}} + \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}} + + \DeclareUnicodeCharacter{00F1}{\~n} + \DeclareUnicodeCharacter{00F2}{\`o} + \DeclareUnicodeCharacter{00F3}{\'o} + \DeclareUnicodeCharacter{00F4}{\^o} + \DeclareUnicodeCharacter{00F5}{\~o} + \DeclareUnicodeCharacter{00F6}{\"o} + \DeclareUnicodeCharacter{00F8}{\o} + \DeclareUnicodeCharacter{00F9}{\`u} + \DeclareUnicodeCharacter{00FA}{\'u} + \DeclareUnicodeCharacter{00FB}{\^u} + \DeclareUnicodeCharacter{00FC}{\"u} + \DeclareUnicodeCharacter{00FD}{\'y} + \DeclareUnicodeCharacter{00FF}{\"y} + + \DeclareUnicodeCharacter{0100}{\=A} + \DeclareUnicodeCharacter{0101}{\=a} + \DeclareUnicodeCharacter{0102}{\u{A}} + \DeclareUnicodeCharacter{0103}{\u{a}} + \DeclareUnicodeCharacter{0106}{\'C} + \DeclareUnicodeCharacter{0107}{\'c} + \DeclareUnicodeCharacter{0108}{\^C} + \DeclareUnicodeCharacter{0109}{\^c} + \DeclareUnicodeCharacter{010A}{\dotaccent{C}} + \DeclareUnicodeCharacter{010B}{\dotaccent{c}} + \DeclareUnicodeCharacter{010C}{\v{C}} + \DeclareUnicodeCharacter{010D}{\v{c}} + \DeclareUnicodeCharacter{010E}{\v{D}} + + \DeclareUnicodeCharacter{0112}{\=E} + \DeclareUnicodeCharacter{0113}{\=e} + \DeclareUnicodeCharacter{0114}{\u{E}} + \DeclareUnicodeCharacter{0115}{\u{e}} + \DeclareUnicodeCharacter{0116}{\dotaccent{E}} + \DeclareUnicodeCharacter{0117}{\dotaccent{e}} + \DeclareUnicodeCharacter{011A}{\v{E}} + \DeclareUnicodeCharacter{011B}{\v{e}} + \DeclareUnicodeCharacter{011C}{\^G} + \DeclareUnicodeCharacter{011D}{\^g} + \DeclareUnicodeCharacter{011E}{\u{G}} + \DeclareUnicodeCharacter{011F}{\u{g}} + + \DeclareUnicodeCharacter{0120}{\dotaccent{G}} + \DeclareUnicodeCharacter{0121}{\dotaccent{g}} + \DeclareUnicodeCharacter{0124}{\^H} + \DeclareUnicodeCharacter{0125}{\^h} + \DeclareUnicodeCharacter{0128}{\~I} + \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}} + \DeclareUnicodeCharacter{012A}{\=I} + \DeclareUnicodeCharacter{012B}{\={\dotless{i}}} + \DeclareUnicodeCharacter{012C}{\u{I}} + \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}} + + \DeclareUnicodeCharacter{0130}{\dotaccent{I}} + \DeclareUnicodeCharacter{0131}{\dotless{i}} + \DeclareUnicodeCharacter{0132}{IJ} + \DeclareUnicodeCharacter{0133}{ij} + \DeclareUnicodeCharacter{0134}{\^J} + \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}} + \DeclareUnicodeCharacter{0139}{\'L} + \DeclareUnicodeCharacter{013A}{\'l} + + \DeclareUnicodeCharacter{0141}{\L} + \DeclareUnicodeCharacter{0142}{\l} + \DeclareUnicodeCharacter{0143}{\'N} + \DeclareUnicodeCharacter{0144}{\'n} + \DeclareUnicodeCharacter{0147}{\v{N}} + \DeclareUnicodeCharacter{0148}{\v{n}} + \DeclareUnicodeCharacter{014C}{\=O} + \DeclareUnicodeCharacter{014D}{\=o} + \DeclareUnicodeCharacter{014E}{\u{O}} + \DeclareUnicodeCharacter{014F}{\u{o}} + + \DeclareUnicodeCharacter{0150}{\H{O}} + \DeclareUnicodeCharacter{0151}{\H{o}} + \DeclareUnicodeCharacter{0152}{\OE} + \DeclareUnicodeCharacter{0153}{\oe} + \DeclareUnicodeCharacter{0154}{\'R} + \DeclareUnicodeCharacter{0155}{\'r} + \DeclareUnicodeCharacter{0158}{\v{R}} + \DeclareUnicodeCharacter{0159}{\v{r}} + \DeclareUnicodeCharacter{015A}{\'S} + \DeclareUnicodeCharacter{015B}{\'s} + \DeclareUnicodeCharacter{015C}{\^S} + \DeclareUnicodeCharacter{015D}{\^s} + \DeclareUnicodeCharacter{015E}{\cedilla{S}} + \DeclareUnicodeCharacter{015F}{\cedilla{s}} + + \DeclareUnicodeCharacter{0160}{\v{S}} + \DeclareUnicodeCharacter{0161}{\v{s}} + \DeclareUnicodeCharacter{0162}{\cedilla{t}} + \DeclareUnicodeCharacter{0163}{\cedilla{T}} + \DeclareUnicodeCharacter{0164}{\v{T}} + + \DeclareUnicodeCharacter{0168}{\~U} + \DeclareUnicodeCharacter{0169}{\~u} + \DeclareUnicodeCharacter{016A}{\=U} + \DeclareUnicodeCharacter{016B}{\=u} + \DeclareUnicodeCharacter{016C}{\u{U}} + \DeclareUnicodeCharacter{016D}{\u{u}} + \DeclareUnicodeCharacter{016E}{\ringaccent{U}} + \DeclareUnicodeCharacter{016F}{\ringaccent{u}} + + \DeclareUnicodeCharacter{0170}{\H{U}} + \DeclareUnicodeCharacter{0171}{\H{u}} + \DeclareUnicodeCharacter{0174}{\^W} + \DeclareUnicodeCharacter{0175}{\^w} + \DeclareUnicodeCharacter{0176}{\^Y} + \DeclareUnicodeCharacter{0177}{\^y} + \DeclareUnicodeCharacter{0178}{\"Y} + \DeclareUnicodeCharacter{0179}{\'Z} + \DeclareUnicodeCharacter{017A}{\'z} + \DeclareUnicodeCharacter{017B}{\dotaccent{Z}} + \DeclareUnicodeCharacter{017C}{\dotaccent{z}} + \DeclareUnicodeCharacter{017D}{\v{Z}} + \DeclareUnicodeCharacter{017E}{\v{z}} + + \DeclareUnicodeCharacter{01C4}{D\v{Z}} + \DeclareUnicodeCharacter{01C5}{D\v{z}} + \DeclareUnicodeCharacter{01C6}{d\v{z}} + \DeclareUnicodeCharacter{01C7}{LJ} + \DeclareUnicodeCharacter{01C8}{Lj} + \DeclareUnicodeCharacter{01C9}{lj} + \DeclareUnicodeCharacter{01CA}{NJ} + \DeclareUnicodeCharacter{01CB}{Nj} + \DeclareUnicodeCharacter{01CC}{nj} + \DeclareUnicodeCharacter{01CD}{\v{A}} + \DeclareUnicodeCharacter{01CE}{\v{a}} + \DeclareUnicodeCharacter{01CF}{\v{I}} + + \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}} + \DeclareUnicodeCharacter{01D1}{\v{O}} + \DeclareUnicodeCharacter{01D2}{\v{o}} + \DeclareUnicodeCharacter{01D3}{\v{U}} + \DeclareUnicodeCharacter{01D4}{\v{u}} + + \DeclareUnicodeCharacter{01E2}{\={\AE}} + \DeclareUnicodeCharacter{01E3}{\={\ae}} + \DeclareUnicodeCharacter{01E6}{\v{G}} + \DeclareUnicodeCharacter{01E7}{\v{g}} + \DeclareUnicodeCharacter{01E8}{\v{K}} + \DeclareUnicodeCharacter{01E9}{\v{k}} + + \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}} + \DeclareUnicodeCharacter{01F1}{DZ} + \DeclareUnicodeCharacter{01F2}{Dz} + \DeclareUnicodeCharacter{01F3}{dz} + \DeclareUnicodeCharacter{01F4}{\'G} + \DeclareUnicodeCharacter{01F5}{\'g} + \DeclareUnicodeCharacter{01F8}{\`N} + \DeclareUnicodeCharacter{01F9}{\`n} + \DeclareUnicodeCharacter{01FC}{\'{\AE}} + \DeclareUnicodeCharacter{01FD}{\'{\ae}} + \DeclareUnicodeCharacter{01FE}{\'{\O}} + \DeclareUnicodeCharacter{01FF}{\'{\o}} + + \DeclareUnicodeCharacter{021E}{\v{H}} + \DeclareUnicodeCharacter{021F}{\v{h}} + + \DeclareUnicodeCharacter{0226}{\dotaccent{A}} + \DeclareUnicodeCharacter{0227}{\dotaccent{a}} + \DeclareUnicodeCharacter{0228}{\cedilla{E}} + \DeclareUnicodeCharacter{0229}{\cedilla{e}} + \DeclareUnicodeCharacter{022E}{\dotaccent{O}} + \DeclareUnicodeCharacter{022F}{\dotaccent{o}} + + \DeclareUnicodeCharacter{0232}{\=Y} + \DeclareUnicodeCharacter{0233}{\=y} + \DeclareUnicodeCharacter{0237}{\dotless{j}} + + \DeclareUnicodeCharacter{1E02}{\dotaccent{B}} + \DeclareUnicodeCharacter{1E03}{\dotaccent{b}} + \DeclareUnicodeCharacter{1E04}{\udotaccent{B}} + \DeclareUnicodeCharacter{1E05}{\udotaccent{b}} + \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}} + \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}} + \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}} + \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}} + \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}} + \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}} + \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}} + \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}} + + \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}} + \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}} + + \DeclareUnicodeCharacter{1E20}{\=G} + \DeclareUnicodeCharacter{1E21}{\=g} + \DeclareUnicodeCharacter{1E22}{\dotaccent{H}} + \DeclareUnicodeCharacter{1E23}{\dotaccent{h}} + \DeclareUnicodeCharacter{1E24}{\udotaccent{H}} + \DeclareUnicodeCharacter{1E25}{\udotaccent{h}} + \DeclareUnicodeCharacter{1E26}{\"H} + \DeclareUnicodeCharacter{1E27}{\"h} + + \DeclareUnicodeCharacter{1E30}{\'K} + \DeclareUnicodeCharacter{1E31}{\'k} + \DeclareUnicodeCharacter{1E32}{\udotaccent{K}} + \DeclareUnicodeCharacter{1E33}{\udotaccent{k}} + \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}} + \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}} + \DeclareUnicodeCharacter{1E36}{\udotaccent{L}} + \DeclareUnicodeCharacter{1E37}{\udotaccent{l}} + \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}} + \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}} + \DeclareUnicodeCharacter{1E3E}{\'M} + \DeclareUnicodeCharacter{1E3F}{\'m} + + \DeclareUnicodeCharacter{1E40}{\dotaccent{M}} + \DeclareUnicodeCharacter{1E41}{\dotaccent{m}} + \DeclareUnicodeCharacter{1E42}{\udotaccent{M}} + \DeclareUnicodeCharacter{1E43}{\udotaccent{m}} + \DeclareUnicodeCharacter{1E44}{\dotaccent{N}} + \DeclareUnicodeCharacter{1E45}{\dotaccent{n}} + \DeclareUnicodeCharacter{1E46}{\udotaccent{N}} + \DeclareUnicodeCharacter{1E47}{\udotaccent{n}} + \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}} + \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}} + + \DeclareUnicodeCharacter{1E54}{\'P} + \DeclareUnicodeCharacter{1E55}{\'p} + \DeclareUnicodeCharacter{1E56}{\dotaccent{P}} + \DeclareUnicodeCharacter{1E57}{\dotaccent{p}} + \DeclareUnicodeCharacter{1E58}{\dotaccent{R}} + \DeclareUnicodeCharacter{1E59}{\dotaccent{r}} + \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}} + \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}} + \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}} + \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}} + + \DeclareUnicodeCharacter{1E60}{\dotaccent{S}} + \DeclareUnicodeCharacter{1E61}{\dotaccent{s}} + \DeclareUnicodeCharacter{1E62}{\udotaccent{S}} + \DeclareUnicodeCharacter{1E63}{\udotaccent{s}} + \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}} + \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}} + \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}} + \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}} + \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}} + \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}} + + \DeclareUnicodeCharacter{1E7C}{\~V} + \DeclareUnicodeCharacter{1E7D}{\~v} + \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}} + \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}} + + \DeclareUnicodeCharacter{1E80}{\`W} + \DeclareUnicodeCharacter{1E81}{\`w} + \DeclareUnicodeCharacter{1E82}{\'W} + \DeclareUnicodeCharacter{1E83}{\'w} + \DeclareUnicodeCharacter{1E84}{\"W} + \DeclareUnicodeCharacter{1E85}{\"w} + \DeclareUnicodeCharacter{1E86}{\dotaccent{W}} + \DeclareUnicodeCharacter{1E87}{\dotaccent{w}} + \DeclareUnicodeCharacter{1E88}{\udotaccent{W}} + \DeclareUnicodeCharacter{1E89}{\udotaccent{w}} + \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}} + \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}} + \DeclareUnicodeCharacter{1E8C}{\"X} + \DeclareUnicodeCharacter{1E8D}{\"x} + \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}} + \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}} + + \DeclareUnicodeCharacter{1E90}{\^Z} + \DeclareUnicodeCharacter{1E91}{\^z} + \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}} + \DeclareUnicodeCharacter{1E93}{\udotaccent{z}} + \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}} + \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}} + \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}} + \DeclareUnicodeCharacter{1E97}{\"t} + \DeclareUnicodeCharacter{1E98}{\ringaccent{w}} + \DeclareUnicodeCharacter{1E99}{\ringaccent{y}} + + \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}} + \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}} + + \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}} + \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}} + \DeclareUnicodeCharacter{1EBC}{\~E} + \DeclareUnicodeCharacter{1EBD}{\~e} + + \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}} + \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}} + \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}} + \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}} + + \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}} + \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}} + + \DeclareUnicodeCharacter{1EF2}{\`Y} + \DeclareUnicodeCharacter{1EF3}{\`y} + \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}} + + \DeclareUnicodeCharacter{1EF8}{\~Y} + \DeclareUnicodeCharacter{1EF9}{\~y} + + \DeclareUnicodeCharacter{2013}{--} + \DeclareUnicodeCharacter{2014}{---} + \DeclareUnicodeCharacter{2022}{\bullet} + \DeclareUnicodeCharacter{2026}{\dots} + \DeclareUnicodeCharacter{20AC}{\euro} + + \DeclareUnicodeCharacter{2192}{\expansion} + \DeclareUnicodeCharacter{21D2}{\result} + + \DeclareUnicodeCharacter{2212}{\minus} + \DeclareUnicodeCharacter{2217}{\point} + \DeclareUnicodeCharacter{2261}{\equiv} +}% end of \utfeightchardefs + + +% US-ASCII character definitions. +\def\asciichardefs{% nothing need be done + \relax +} + +% Make non-ASCII characters printable again for compatibility with +% existing Texinfo documents that may use them, even without declaring a +% document encoding. +% +\setnonasciicharscatcode \other + + +\message{formatting,} + \newdimen\defaultparindent \defaultparindent = 15pt \chapheadingskip = 15pt plus 4pt minus 2pt @@ -7102,22 +8264,6 @@ should work if nowhere else does.} % \otherifyactive is called near the end of this file. \def\otherifyactive{\catcode`+=\other \catcode`\_=\other} -% Same as @turnoffactive below, but backslash retains it's normal definition. -% (Before 2005-08-15, this macro explicitly assigned @let\=@normalbackslash, -% but it doesn't seem to be necessary. --kasal) -\def\normalturnoffactive{% - \let"=\normaldoublequote - \let~=\normaltilde - \let^=\normalcaret - \let_=\normalunderscore - \let|=\normalverticalbar - \let<=\normalless - \let>=\normalgreater - \let+=\normalplus - \let$=\normaldollar %$ font-lock fix - \unsepspaces -} - % Used sometimes to turn off (effectively) the active characters even after % parsing them. \def\turnoffactive{% @@ -7149,6 +8295,23 @@ should work if nowhere else does.} @gdef@rawbackslash{@let\=@backslashcurfont} @gdef@otherbackslash{@let\=@realbackslash} +% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of +% the literal character `\'. +% +@def@normalturnoffactive{% + @let\=@normalbackslash + @let"=@normaldoublequote + @let~=@normaltilde + @let^=@normalcaret + @let_=@normalunderscore + @let|=@normalverticalbar + @let<=@normalless + @let>=@normalgreater + @let+=@normalplus + @let$=@normaldollar %$ font-lock fix + @unsepspaces +} + % Make _ and + \other characters, temporarily. % This is canceled by @fixbackslash. @otherifyactive