X-Git-Url: http://erislabs.net/gitweb/?a=blobdiff_plain;f=tests%2Finit.sh;h=794352673f223c6592260c3352a3a793705c7961;hb=a01b938c7f0c8e406c82d07cb921bf6c3c1e29df;hp=cc0248721590cd0111b0992f3c94e9d89d0b7e52;hpb=5aad650f4e093269e4184cb150f735f6999784d6;p=gnulib.git

diff --git a/tests/init.sh b/tests/init.sh
index cc0248721..794352673 100644
--- a/tests/init.sh
+++ b/tests/init.sh
@@ -1,6 +1,6 @@
 # source this file; set up for tests
 
-# Copyright (C) 2009 Free Software Foundation, Inc.
+# Copyright (C) 2009, 2010 Free Software Foundation, Inc.
 
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -21,11 +21,16 @@
 # The typical skeleton of a test looks like this:
 #
 #   #!/bin/sh
-#   : ${srcdir=.}
-#   . "$srcdir/init.sh"; path_prepend_ .
+#   . "${srcdir=.}/init.sh"; path_prepend_ .
 #   Execute some commands.
 #   Note that these commands are executed in a subdirectory, therefore you
 #   need to prepend "../" to relative filenames in the build directory.
+#   Note that the "path_prepend_ ." is useful only if the body of your
+#   test invokes programs residing in the initial directory.
+#   For example, if the programs you want to test are in src/, and this test
+#   script is named tests/test-1, then you would use "path_prepend_ ../src",
+#   or perhaps export PATH='$(abs_top_builddir)/src$(PATH_SEPARATOR)'"$$PATH"
+#   to all tests via automake's TESTS_ENVIRONMENT.
 #   Set the exit code 0 for success, 77 for skipped, or 1 or other for failure.
 #   Use the skip_ and fail_ functions to print a diagnostic and then exit
 #   with the corresponding exit code.
@@ -52,6 +57,8 @@
 #   4. Finally
 #   $ exit
 
+ME_=`expr "./$0" : '.*/\(.*\)$'`
+
 # We use a trap below for cleanup.  This requires us to go through
 # hoops to get the right exit status transported through the handler.
 # So use `Exit STATUS' instead of `exit STATUS' inside of the tests.
@@ -59,17 +66,88 @@
 # sh inside this function.
 Exit () { set +e; (exit $1); exit $1; }
 
-fail_() { echo "$ME_: failed test: $@" 1>&2; Exit 1; }
-skip_() { echo "$ME_: skipped test: $@" 1>&2; Exit 77; }
+# Print warnings (e.g., about skipped and failed tests) to this file number.
+# Override by defining to say, 9, in init.cfg, and putting say,
+# "export ...ENVVAR_SETTINGS...; exec 9>&2; $(SHELL)" in the definition
+# of TESTS_ENVIRONMENT in your tests/Makefile.am file.
+# This is useful when using automake's parallel tests mode, to print
+# the reason for skip/failure to console, rather than to the .log files.
+: ${stderr_fileno_=2}
+
+warn_() { echo "$@" 1>&$stderr_fileno_; }
+fail_() { warn_ "$ME_: failed test: $@"; Exit 1; }
+skip_() { warn_ "$ME_: skipped test: $@"; Exit 77; }
+framework_failure_() { warn_ "$ME_: set-up failure: $@"; Exit 99; }
+
+# We require $(...) support unconditionally.
+# We require a few additional shell features only when $EXEEXT is nonempty,
+# in order to support automatic $EXEEXT emulation:
+# - hyphen-containing alias names
+# - we prefer to use ${var#...} substitution, rather than having
+#   to work around lack of support for that feature.
+# The following code attempts to find a shell with support for these features.
+# If the current shell passes the test, we're done.  Otherwise, test other
+# shells until we find one that passes.  If one is found, re-exec it.
+# If no acceptable shell is found, skip the current test.
+#
+# Use "9" to indicate success (rather than 0), in case some shell acts
+# like Solaris 10's /bin/sh but exits successfully instead of with status 2.
+
+gl_shell_test_script_='
+test $(echo y) = y || exit 1
+test -z "$EXEEXT" && exit 9
+shopt -s expand_aliases
+alias a-b="echo zoo"
+v=abx
+     test ${v%x} = ab \
+  && test ${v#a} = bx \
+  && test $(a-b) = zoo \
+  && exit 9
+'
+
+if test "x$1" = "x--no-reexec"; then
+  shift
+else
+  # 'eval'ing the above code makes Solaris 10's /bin/sh exit with $? set to 2.
+  # It does not evaluate any of the code after the "unexpected" `('.  Thus,
+  # we must run it in a subshell.
+  ( eval "$gl_shell_test_script_" ) > /dev/null 2>&1
+  if test $? = 9; then
+    : # The current shell is adequate.  No re-exec required.
+  else
+    # Search for a shell that meets our requirements.
+    for re_shell_ in "${CONFIG_SHELL:-no_shell}" /bin/sh bash dash zsh pdksh fail
+    do
+      test "$re_shell_" = no_shell && continue
+      test "$re_shell_" = fail && skip_ failed to find an adequate shell
+      "$re_shell_" -c "$gl_shell_test_script_" 2>/dev/null
+      if test $? = 9; then
+        # Found an acceptable shell.
+        exec "$re_shell_" "$0" --no-reexec "$@"
+        echo "$ME_: exec failed" 1>&2
+        exit 127
+      fi
+    done
+  fi
+fi
+
+test -n "$EXEEXT" && shopt -s expand_aliases
+
+# Enable glibc's malloc-perturbing option.
+# This is cheap and useful for exposing code that depends on the fact that
+# malloc-related functions often return memory that is mostly zeroed.
+# If you have the time and cycles, use valgrind to do an even better job.
+: ${MALLOC_PERTURB_=87}
+export MALLOC_PERTURB_
 
 # This is a stub function that is run upon trap (upon regular exit and
 # interrupt).  Override it with a per-test function, e.g., to unmount
 # a partition, or to undo any other global state changes.
 cleanup_() { :; }
 
-if ( diff --version < /dev/null 2>&1 | grep GNU ) 2>&1 > /dev/null; then
+if ( diff --version < /dev/null 2>&1 | grep GNU ) > /dev/null 2>&1; then
   compare() { diff -u "$@"; }
-elif ( cmp --version < /dev/null 2>&1 | grep GNU ) 2>&1 > /dev/null; then
+elif ( cmp --version < /dev/null 2>&1 | grep GNU ) > /dev/null 2>&1; then
   compare() { cmp -s "$@"; }
 else
   compare() { cmp "$@"; }
@@ -92,8 +170,57 @@ remove_tmp_()
   exit $__st
 }
 
+# Given a directory name, DIR, if every entry in it that matches *.exe
+# contains only the specified bytes (see the case stmt below), then print
+# a space-separated list of those names and return 0.  Otherwise, don't
+# print anything and return 1.  Naming constraints apply also to DIR.
+find_exe_basenames_()
+{
+  feb_dir_=$1
+  feb_fail_=0
+  feb_result_=
+  feb_sp_=
+  for feb_file_ in $feb_dir_/*.exe; do
+    case $feb_file_ in
+      *[!-a-zA-Z/0-9_.+]*) feb_fail_=1; break;;
+      *) # Remove leading file name components as well as the .exe suffix.
+         feb_file_=${feb_file_##*/}
+         feb_file_=${feb_file_%.exe}
+         feb_result_="$feb_result_$feb_sp_$feb_file_";;
+    esac
+    feb_sp_=' '
+  done
+  test $feb_fail_ = 0 && printf %s "$feb_result_"
+  return $feb_fail_
+}
+
+# Consider the files in directory, $1.
+# For each file name of the form PROG.exe, create an alias named
+# PROG that simply invokes PROG.exe, then return 0.  If any selected
+# file name or the directory name, $1, contains an unexpected character,
+# define no function and return 1.
+create_exe_shims_()
+{
+  case $EXEEXT in
+    '') return 0 ;;
+    .exe) ;;
+    *) echo "$0: unexpected \$EXEEXT value: $EXEEXT" 1>&2; return 1 ;;
+  esac
+
+  base_names_=`find_exe_basenames_ $1` \
+    || { echo "$0 (exe_shim): skipping directory: $1" 1>&2; return 1; }
+
+  if test -n "$base_names_"; then
+    for base_ in $base_names_; do
+      alias "$base_"="$base_$EXEEXT"
+    done
+  fi
+
+  return 0
+}
+
 # Use this function to prepend to PATH an absolute name for each
-# specified, possibly-$initial_cwd_relative, directory.
+# specified, possibly-$initial_cwd_-relative, directory.
 path_prepend_()
 {
   while test $# != 0; do
@@ -108,6 +235,10 @@ path_prepend_()
       *:*) fail_ "invalid path dir: '$abs_path_dir_'";;
     esac
     PATH="$abs_path_dir_:$PATH"
+
+    # Create an alias, FOO, for each FOO.exe in this directory.
+    create_exe_shims_ "$abs_path_dir_" \
+      || fail_ "something failed (above): $abs_path_dir_"
     shift
   done
   export PATH
@@ -118,17 +249,18 @@ setup_()
   test "$VERBOSE" = yes && set -x
 
   initial_cwd_=$PWD
-  ME_=`expr "./$0" : '.*/\(.*\)$'`
 
   pfx_=`testdir_prefix_`
   test_dir_=`mktempd_ "$initial_cwd_" "$pfx_-$ME_.XXXX"` \
     || fail_ "failed to create temporary directory in $initial_cwd_"
   cd "$test_dir_"
 
-  # This pair of trap statements ensures that the temporary directory,
-  # $test_dir_, is removed upon exit as well as upon catchable signal.
+  # These trap statements ensure that the temporary directory, $test_dir_,
+  # is removed upon exit as well as upon receipt of any of the listed signals.
   trap remove_tmp_ 0
-  trap 'Exit $?' 1 2 13 15
+  for sig_ in 1 2 3 13 15; do
+    eval "trap 'Exit $(expr $sig_ + 128)' $sig_"
+  done
 }
 
 # Create a temporary directory, much like mktemp -d does.
@@ -159,7 +291,7 @@ rand_bytes_()
   if test -r "$dev_rand_"; then
     # Note: 256-length($chars_) == 194; 3 copies of $chars_ is 186 + 8 = 194.
     dd ibs=$n_ count=1 if=$dev_rand_ 2>/dev/null \
-      | tr -c $chars_ 01234567$chars_$chars_$chars_
+      | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_
     return
   fi
 
@@ -176,7 +308,7 @@ rand_bytes_()
 
   echo "$data_" \
     | dd bs=1 skip=50 count=$n_ 2>/dev/null \
-    | tr -c $chars_ 01234567$chars_$chars_$chars_
+    | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_
 }
 
 mktempd_()
@@ -206,7 +338,7 @@ mktempd_()
   fail=0
 
   # First, try to use mktemp.
-  d=`env -u TMPDIR mktemp -d -t -p "$destdir_" "$template_" 2>/dev/null` \
+  d=`unset TMPDIR; mktemp -d -t -p "$destdir_" "$template_" 2>/dev/null` \
     || fail=1
 
   # The resulting name must be in the specified directory.