/* Functions to compute MD5 message digest of files or memory blocks.
according to the definition of MD5 in RFC 1321 from April 1992.
- Copyright (C) 1995,1996,1997,1999,2000,2001,2005,2006
- Free Software Foundation, Inc.
+ Copyright (C) 1995-1997, 1999-2001, 2005-2006, 2008-2013 Free Software
+ Foundation, Inc.
This file is part of the GNU C Library.
This program is free software; you can redistribute it and/or modify it
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+ along with this program; if not, see <http://www.gnu.org/licenses/>. */
/* Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. */
#include <config.h>
+#if HAVE_OPENSSL_MD5
+# define GL_OPENSSL_INLINE _GL_EXTERN_INLINE
+#endif
#include "md5.h"
-#include <stddef.h>
+#include <stdalign.h>
+#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#endif
#ifdef WORDS_BIGENDIAN
-# define SWAP(n) \
+# define SWAP(n) \
(((n) << 24) | (((n) & 0xff00) << 8) | (((n) >> 8) & 0xff00) | ((n) >> 24))
#else
# define SWAP(n) (n)
#endif
-#define BLOCKSIZE 4096
+#define BLOCKSIZE 32768
#if BLOCKSIZE % 64 != 0
# error "invalid BLOCKSIZE"
#endif
+#if ! HAVE_OPENSSL_MD5
/* This array contains the bytes used to pad the buffer to the next
64-byte boundary. (RFC 1321, 3.1: Step 1) */
static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ... */ };
ctx->buflen = 0;
}
-/* Put result from CTX in first 16 bytes following RESBUF. The result
- must be in little endian byte order.
+/* Copy the 4 byte value from v into the memory location pointed to by *cp,
+ If your architecture allows unaligned access this is equivalent to
+ * (uint32_t *) cp = v */
+static void
+set_uint32 (char *cp, uint32_t v)
+{
+ memcpy (cp, &v, sizeof v);
+}
- IMPORTANT: On some systems it is required that RESBUF is correctly
- aligned for a 32-bit value. */
+/* Put result from CTX in first 16 bytes following RESBUF. The result
+ must be in little endian byte order. */
void *
md5_read_ctx (const struct md5_ctx *ctx, void *resbuf)
{
- ((uint32_t *) resbuf)[0] = SWAP (ctx->A);
- ((uint32_t *) resbuf)[1] = SWAP (ctx->B);
- ((uint32_t *) resbuf)[2] = SWAP (ctx->C);
- ((uint32_t *) resbuf)[3] = SWAP (ctx->D);
+ char *r = resbuf;
+ set_uint32 (r + 0 * sizeof ctx->A, SWAP (ctx->A));
+ set_uint32 (r + 1 * sizeof ctx->B, SWAP (ctx->B));
+ set_uint32 (r + 2 * sizeof ctx->C, SWAP (ctx->C));
+ set_uint32 (r + 3 * sizeof ctx->D, SWAP (ctx->D));
return resbuf;
}
/* Process the remaining bytes in the internal buffer and the usual
- prolog according to the standard and write the result to RESBUF.
-
- IMPORTANT: On some systems it is required that RESBUF is correctly
- aligned for a 32-bit value. */
+ prolog according to the standard and write the result to RESBUF. */
void *
md5_finish_ctx (struct md5_ctx *ctx, void *resbuf)
{
return md5_read_ctx (ctx, resbuf);
}
+#endif
/* Compute MD5 message digest for bytes read from STREAM. The
resulting message digest number will be written into the 16 bytes
md5_stream (FILE *stream, void *resblock)
{
struct md5_ctx ctx;
- char buffer[BLOCKSIZE + 72];
size_t sum;
+ char *buffer = malloc (BLOCKSIZE + 72);
+ if (!buffer)
+ return 1;
+
/* Initialize the computation context. */
md5_init_ctx (&ctx);
/* Read block. Take care for partial reads. */
while (1)
- {
- n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream);
-
- sum += n;
-
- if (sum == BLOCKSIZE)
- break;
-
- if (n == 0)
- {
- /* Check for the error flag IFF N == 0, so that we don't
- exit the loop after a partial read due to e.g., EAGAIN
- or EWOULDBLOCK. */
- if (ferror (stream))
- return 1;
- goto process_partial_block;
- }
-
- /* We've read at least one byte, so ignore errors. But always
- check for EOF, since feof may be true even though N > 0.
- Otherwise, we could end up calling fread after EOF. */
- if (feof (stream))
- goto process_partial_block;
- }
+ {
+ n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream);
+
+ sum += n;
+
+ if (sum == BLOCKSIZE)
+ break;
+
+ if (n == 0)
+ {
+ /* Check for the error flag IFF N == 0, so that we don't
+ exit the loop after a partial read due to e.g., EAGAIN
+ or EWOULDBLOCK. */
+ if (ferror (stream))
+ {
+ free (buffer);
+ return 1;
+ }
+ goto process_partial_block;
+ }
+
+ /* We've read at least one byte, so ignore errors. But always
+ check for EOF, since feof may be true even though N > 0.
+ Otherwise, we could end up calling fread after EOF. */
+ if (feof (stream))
+ goto process_partial_block;
+ }
/* Process buffer with BLOCKSIZE bytes. Note that
BLOCKSIZE % 64 == 0
/* Construct result in desired memory. */
md5_finish_ctx (&ctx, resblock);
+ free (buffer);
return 0;
}
+#if ! HAVE_OPENSSL_MD5
/* Compute MD5 message digest for LEN bytes beginning at BUFFER. The
result is always in little endian byte order, so that a byte-wise
output yields to the wanted ASCII representation of the message
ctx->buflen += add;
if (ctx->buflen > 64)
- {
- md5_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
+ {
+ md5_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
- ctx->buflen &= 63;
- /* The regions in the following copy operation cannot overlap. */
- memcpy (ctx->buffer,
- &((char *) ctx->buffer)[(left_over + add) & ~63],
- ctx->buflen);
- }
+ ctx->buflen &= 63;
+ /* The regions in the following copy operation cannot overlap. */
+ memcpy (ctx->buffer,
+ &((char *) ctx->buffer)[(left_over + add) & ~63],
+ ctx->buflen);
+ }
buffer = (const char *) buffer + add;
len -= add;
if (len >= 64)
{
#if !_STRING_ARCH_unaligned
-# define alignof(type) offsetof (struct { char c; type x; }, x)
-# define UNALIGNED_P(p) (((size_t) p) % alignof (uint32_t) != 0)
+# define UNALIGNED_P(p) ((uintptr_t) (p) % alignof (uint32_t) != 0)
if (UNALIGNED_P (buffer))
- while (len > 64)
- {
- md5_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx);
- buffer = (const char *) buffer + 64;
- len -= 64;
- }
+ while (len > 64)
+ {
+ md5_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx);
+ buffer = (const char *) buffer + 64;
+ len -= 64;
+ }
else
#endif
- {
- md5_process_block (buffer, len & ~63, ctx);
- buffer = (const char *) buffer + (len & ~63);
- len &= 63;
- }
+ {
+ md5_process_block (buffer, len & ~63, ctx);
+ buffer = (const char *) buffer + (len & ~63);
+ len &= 63;
+ }
}
/* Move remaining bytes in internal buffer. */
memcpy (&((char *) ctx->buffer)[left_over], buffer, len);
left_over += len;
if (left_over >= 64)
- {
- md5_process_block (ctx->buffer, 64, ctx);
- left_over -= 64;
- memcpy (ctx->buffer, &ctx->buffer[16], left_over);
- }
+ {
+ md5_process_block (ctx->buffer, 64, ctx);
+ left_over -= 64;
+ memcpy (ctx->buffer, &ctx->buffer[16], left_over);
+ }
ctx->buflen = left_over;
}
}
uint32_t B = ctx->B;
uint32_t C = ctx->C;
uint32_t D = ctx->D;
+ uint32_t lolen = len;
/* First increment the byte count. RFC 1321 specifies the possible
length of the file up to 2^64 bits. Here we only compute the
number of bytes. Do a double word increment. */
- ctx->total[0] += len;
- if (ctx->total[0] < len)
- ++ctx->total[1];
+ ctx->total[0] += lolen;
+ ctx->total[1] += (len >> 31 >> 1) + (ctx->total[0] < lolen);
/* Process all bytes in the buffer with 64 bytes in each round of
the loop. */
before the computation. To reduce the work for the next steps
we store the swapped words in the array CORRECT_WORDS. */
-#define OP(a, b, c, d, s, T) \
- do \
- { \
- a += FF (b, c, d) + (*cwp++ = SWAP (*words)) + T; \
- ++words; \
- CYCLIC (a, s); \
- a += b; \
- } \
+#define OP(a, b, c, d, s, T) \
+ do \
+ { \
+ a += FF (b, c, d) + (*cwp++ = SWAP (*words)) + T; \
+ ++words; \
+ CYCLIC (a, s); \
+ a += b; \
+ } \
while (0)
/* It is unfortunate that C does not provide an operator for
in CORRECT_WORDS. Redefine the macro to take an additional first
argument specifying the function to use. */
#undef OP
-#define OP(f, a, b, c, d, k, s, T) \
- do \
- { \
- a += f (b, c, d) + correct_words[k] + T; \
- CYCLIC (a, s); \
- a += b; \
- } \
+#define OP(f, a, b, c, d, k, s, T) \
+ do \
+ { \
+ a += f (b, c, d) + correct_words[k] + T; \
+ CYCLIC (a, s); \
+ a += b; \
+ } \
while (0)
/* Round 2. */
ctx->C = C;
ctx->D = D;
}
+#endif
projects / gnulib.git / blobdiff