/* sha1.c - Functions to compute SHA1 message digest of files or
memory blocks according to the NIST specification FIPS-180-1.
- Copyright (C) 2000, 2001, 2003, 2004, 2005, 2006 Free Software
- Foundation, Inc.
+ Copyright (C) 2000-2001, 2003-2006, 2008-2013 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+ along with this program; if not, see <http://www.gnu.org/licenses/>. */
/* Written by Scott G. Miller
Credits:
Robert Klep <robert@ilse.nl> -- Expansion function fix
*/
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
+#include <config.h>
+#if HAVE_OPENSSL_SHA1
+# define GL_OPENSSL_INLINE _GL_EXTERN_INLINE
+#endif
#include "sha1.h"
-#include <stddef.h>
+#include <stdalign.h>
+#include <stdint.h>
+#include <stdlib.h>
#include <string.h>
#if USE_UNLOCKED_IO
(((n) << 24) | (((n) & 0xff00) << 8) | (((n) >> 8) & 0xff00) | ((n) >> 24))
#endif
-#define BLOCKSIZE 4096
+#define BLOCKSIZE 32768
#if BLOCKSIZE % 64 != 0
# error "invalid BLOCKSIZE"
#endif
+#if ! HAVE_OPENSSL_SHA1
/* This array contains the bytes used to pad the buffer to the next
64-byte boundary. (RFC 1321, 3.1: Step 1) */
static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ... */ };
ctx->buflen = 0;
}
-/* Put result from CTX in first 20 bytes following RESBUF. The result
- must be in little endian byte order.
+/* Copy the 4 byte value from v into the memory location pointed to by *cp,
+ If your architecture allows unaligned access this is equivalent to
+ * (uint32_t *) cp = v */
+static void
+set_uint32 (char *cp, uint32_t v)
+{
+ memcpy (cp, &v, sizeof v);
+}
- IMPORTANT: On some systems it is required that RESBUF is correctly
- aligned for a 32-bit value. */
+/* Put result from CTX in first 20 bytes following RESBUF. The result
+ must be in little endian byte order. */
void *
sha1_read_ctx (const struct sha1_ctx *ctx, void *resbuf)
{
- ((uint32_t *) resbuf)[0] = SWAP (ctx->A);
- ((uint32_t *) resbuf)[1] = SWAP (ctx->B);
- ((uint32_t *) resbuf)[2] = SWAP (ctx->C);
- ((uint32_t *) resbuf)[3] = SWAP (ctx->D);
- ((uint32_t *) resbuf)[4] = SWAP (ctx->E);
+ char *r = resbuf;
+ set_uint32 (r + 0 * sizeof ctx->A, SWAP (ctx->A));
+ set_uint32 (r + 1 * sizeof ctx->B, SWAP (ctx->B));
+ set_uint32 (r + 2 * sizeof ctx->C, SWAP (ctx->C));
+ set_uint32 (r + 3 * sizeof ctx->D, SWAP (ctx->D));
+ set_uint32 (r + 4 * sizeof ctx->E, SWAP (ctx->E));
return resbuf;
}
/* Process the remaining bytes in the internal buffer and the usual
- prolog according to the standard and write the result to RESBUF.
-
- IMPORTANT: On some systems it is required that RESBUF is correctly
- aligned for a 32-bit value. */
+ prolog according to the standard and write the result to RESBUF. */
void *
sha1_finish_ctx (struct sha1_ctx *ctx, void *resbuf)
{
return sha1_read_ctx (ctx, resbuf);
}
+#endif
/* Compute SHA1 message digest for bytes read from STREAM. The
resulting message digest number will be written into the 16 bytes
sha1_stream (FILE *stream, void *resblock)
{
struct sha1_ctx ctx;
- char buffer[BLOCKSIZE + 72];
size_t sum;
+ char *buffer = malloc (BLOCKSIZE + 72);
+ if (!buffer)
+ return 1;
+
/* Initialize the computation context. */
sha1_init_ctx (&ctx);
while (1)
{
/* We read the file in blocks of BLOCKSIZE bytes. One call of the
- computation function processes the whole buffer so that with the
- next round of the loop another block can be read. */
+ computation function processes the whole buffer so that with the
+ next round of the loop another block can be read. */
size_t n;
sum = 0;
/* Read block. Take care for partial reads. */
while (1)
- {
- n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream);
-
- sum += n;
-
- if (sum == BLOCKSIZE)
- break;
-
- if (n == 0)
- {
- /* Check for the error flag IFF N == 0, so that we don't
- exit the loop after a partial read due to e.g., EAGAIN
- or EWOULDBLOCK. */
- if (ferror (stream))
- return 1;
- goto process_partial_block;
- }
-
- /* We've read at least one byte, so ignore errors. But always
- check for EOF, since feof may be true even though N > 0.
- Otherwise, we could end up calling fread after EOF. */
- if (feof (stream))
- goto process_partial_block;
- }
+ {
+ n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream);
+
+ sum += n;
+
+ if (sum == BLOCKSIZE)
+ break;
+
+ if (n == 0)
+ {
+ /* Check for the error flag IFF N == 0, so that we don't
+ exit the loop after a partial read due to e.g., EAGAIN
+ or EWOULDBLOCK. */
+ if (ferror (stream))
+ {
+ free (buffer);
+ return 1;
+ }
+ goto process_partial_block;
+ }
+
+ /* We've read at least one byte, so ignore errors. But always
+ check for EOF, since feof may be true even though N > 0.
+ Otherwise, we could end up calling fread after EOF. */
+ if (feof (stream))
+ goto process_partial_block;
+ }
/* Process buffer with BLOCKSIZE bytes. Note that
- BLOCKSIZE % 64 == 0
+ BLOCKSIZE % 64 == 0
*/
sha1_process_block (buffer, BLOCKSIZE, &ctx);
}
/* Construct result in desired memory. */
sha1_finish_ctx (&ctx, resblock);
+ free (buffer);
return 0;
}
-/* Compute MD5 message digest for LEN bytes beginning at BUFFER. The
+#if ! HAVE_OPENSSL_SHA1
+/* Compute SHA1 message digest for LEN bytes beginning at BUFFER. The
result is always in little endian byte order, so that a byte-wise
output yields to the wanted ASCII representation of the message
digest. */
ctx->buflen += add;
if (ctx->buflen > 64)
- {
- sha1_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
+ {
+ sha1_process_block (ctx->buffer, ctx->buflen & ~63, ctx);
- ctx->buflen &= 63;
- /* The regions in the following copy operation cannot overlap. */
- memcpy (ctx->buffer,
- &((char *) ctx->buffer)[(left_over + add) & ~63],
- ctx->buflen);
- }
+ ctx->buflen &= 63;
+ /* The regions in the following copy operation cannot overlap. */
+ memcpy (ctx->buffer,
+ &((char *) ctx->buffer)[(left_over + add) & ~63],
+ ctx->buflen);
+ }
buffer = (const char *) buffer + add;
len -= add;
if (len >= 64)
{
#if !_STRING_ARCH_unaligned
-# define alignof(type) offsetof (struct { char c; type x; }, x)
-# define UNALIGNED_P(p) (((size_t) p) % alignof (uint32_t) != 0)
+# define UNALIGNED_P(p) ((uintptr_t) (p) % alignof (uint32_t) != 0)
if (UNALIGNED_P (buffer))
- while (len > 64)
- {
- sha1_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx);
- buffer = (const char *) buffer + 64;
- len -= 64;
- }
+ while (len > 64)
+ {
+ sha1_process_block (memcpy (ctx->buffer, buffer, 64), 64, ctx);
+ buffer = (const char *) buffer + 64;
+ len -= 64;
+ }
else
#endif
- {
- sha1_process_block (buffer, len & ~63, ctx);
- buffer = (const char *) buffer + (len & ~63);
- len &= 63;
- }
+ {
+ sha1_process_block (buffer, len & ~63, ctx);
+ buffer = (const char *) buffer + (len & ~63);
+ len &= 63;
+ }
}
/* Move remaining bytes in internal buffer. */
memcpy (&((char *) ctx->buffer)[left_over], buffer, len);
left_over += len;
if (left_over >= 64)
- {
- sha1_process_block (ctx->buffer, 64, ctx);
- left_over -= 64;
- memcpy (ctx->buffer, &ctx->buffer[16], left_over);
- }
+ {
+ sha1_process_block (ctx->buffer, 64, ctx);
+ left_over -= 64;
+ memcpy (ctx->buffer, &ctx->buffer[16], left_over);
+ }
ctx->buflen = left_over;
}
}
uint32_t c = ctx->C;
uint32_t d = ctx->D;
uint32_t e = ctx->E;
+ uint32_t lolen = len;
/* First increment the byte count. RFC 1321 specifies the possible
length of the file up to 2^64 bits. Here we only compute the
number of bytes. Do a double word increment. */
- ctx->total[0] += len;
- if (ctx->total[0] < len)
- ++ctx->total[1];
+ ctx->total[0] += lolen;
+ ctx->total[1] += (len >> 31 >> 1) + (ctx->total[0] < lolen);
#define rol(x, n) (((x) << (n)) | ((uint32_t) (x) >> (32 - (n))))
#define M(I) ( tm = x[I&0x0f] ^ x[(I-14)&0x0f] \
- ^ x[(I-8)&0x0f] ^ x[(I-3)&0x0f] \
- , (x[I&0x0f] = rol(tm, 1)) )
+ ^ x[(I-8)&0x0f] ^ x[(I-3)&0x0f] \
+ , (x[I&0x0f] = rol(tm, 1)) )
#define R(A,B,C,D,E,F,K,M) do { E += rol( A, 5 ) \
- + F( B, C, D ) \
- + K \
- + M; \
- B = rol( B, 30 ); \
- } while(0)
+ + F( B, C, D ) \
+ + K \
+ + M; \
+ B = rol( B, 30 ); \
+ } while(0)
while (words < endp)
{
uint32_t tm;
int t;
for (t = 0; t < 16; t++)
- {
- x[t] = SWAP (*words);
- words++;
- }
+ {
+ x[t] = SWAP (*words);
+ words++;
+ }
R( a, b, c, d, e, F1, K1, x[ 0] );
R( e, a, b, c, d, F1, K1, x[ 1] );
e = ctx->E += e;
}
}
+#endif
projects / gnulib.git / blobdiff