+++ /dev/null
-# makefile / Makefile / ckuker.mak / CKUKER.MAK
-#
-# Sat Apr 17 14:49:18 2004
-BUILDID=20040417
-#
-CKVER= "8.0.211"
-#
-# -- Makefile to build C-Kermit for UNIX and UNIX-like platforms --
-#
-# Copyright (C) 1985, 2004,
-# Trustees of Columbia University in the City of New York.
-# All rights reserved. See the C-Kermit COPYING.TXT file or the
-# copyright text in the ckcmai.c module for disclaimer and permissions.
-#
-# Author: Frank da Cruz, Columbia University
-# 612 West 115th Street, New York NY 10025-7799, USA
-# E-mail: fdc@columbia.edu
-# Fax: +1 212 662-6442
-# Web: http://www.columbia.edu/kermit/
-#
-# Contributions from many others. Special thanks to Jeff Altman for the
-# secure-target entries, Peter Eichhorn, assyst GmbH, for the consolidated
-# HP-UX entries and the "uninstall" target, to Robert Lipe for the updated
-# and consolidated SCO UNIX / ODT / OSR5 entries, to Ric Anderson for the
-# IRIX 6.x entries.
-#
-# Most entries use the "xermit" target, which uses the select()-based CONNECT
-# module, ckucns.c. The "wermit" target uses the older fork()-base CONNECT
-# module, ckucon.c, which has some drawbacks (but is more portable). If your
-# entry still uses the "wermit" target, please try substituting the "xermit"
-# one and if it works, let us know (mailto:kermit-support@columbia.edu).
-# When changing a target over from wermit to xermit, also remove -DNOLOEARN.
-#
-# CAREFUL: Don't put the lowercase word "if", "define", or "end" as the first
-# word after the "#" comment introducer in the makefile, even if it is
-# separated by whitespace. Some versions of "make" understand these as
-# directives. Uppercase letters remove the danger, e.g. "# If you have..."
-#
-# WARNING: This is a huge makefile and it contains nested makes. Some "make"
-# programs might run out of memory. If this happens to you, edit away the
-# parts that do not apply to your platform and try again.
-#
-# Certain UNIX variations have their own separate makefiles:
-# . For 2.10 or 2.11 BSD on DEC PDP-11s, use ckubs2.mak.
-# . For Plan 9, use ckpker.mk.
-#
-# Separate build procedures are provided non-UNIX platforms: VMS, VOS,
-# AOS/VS, etc. See the ckaaaa.txt file for details.
-#
-#
-# DIRECTIONS
-#
-# Rename this file to "makefile" or "Makefile" if necessary. Pick out the
-# entry most appropriate for your UNIX version from the list below and then
-# give the appropriate "make" command, for example "make aix43", "make sys5r4",
-# "make linux". If you experience any difficulties with the build procedure,
-# then please also read any comments that accompany the make entry itself
-# (search for the make entry name on the left margin).
-#
-# Other entries:
-# 'make install' is an installation script (read accompanying comments!).
-# 'make clean' removes intermediate and object files.
-#
-# IMPORTANT:
-# For more detailed installation instructions, read the files ckuins.txt
-# and ckccfg.txt, also available at the Kermit website in HTML form:
-# http://www.columbia.edu/kermit/ckuins.html
-# http://www.columbia.edu/kermit/ckccfg.html
-#
-# For descriptions of known problems and limitations,
-# read the files ckcbwr.txt and ckubwr.txt (the "beware files") or:
-# http://www.columbia.edu/kermit/ckcbwr.html
-# http://www.columbia.edu/kermit/ckubwr.html
-#
-# Most entries build C-Kermit with its symbol table included. To reduce the
-# size of the executable program, add "LNKFLAGS=-s" to the end of your 'make'
-# command or to the makefile entry, or 'strip' the executable after
-# building. To further reduce the size after building, use 'mcs -d' if your
-# Unix version has such a command. For further details on size reduction, read
-# ckccfg.txt to find out how to remove features that you don't need.
-#
-# TCP/IP networking support: If your C-Kermit version does not include TCP/IP
-# networking, but your UNIX system does, try adding -DTCPSOCKET to the CFLAGS
-# of your makefile entry. If that doesn't work, look at some of the other
-# entries that include this flag for ideas about what libraries might need to
-# be included (typically -lsocket and/or -lBSD and/or -lnsl and/or -linet).
-# NOTE: In some cases (old versions of SCO or HP-UX), you might need not only
-# a C compiler, but also a "TCP/IP developers kit" for the required object
-# libraries and header files.
-#
-# Fullscreen file transfer display support: If you are going to use C-Kermit
-# for establishing connections (dialed, network, etc), you can configure it to
-# produce a formatted file transfer display by including the curses library
-# and adding -DCK_CURSES to the CFLAGS for your option, and linking with the
-# appropriate libraries. There are many examples below, usually ending in
-# "c", like sunos41c. Also add -DCK_WREFRESH if your curses library includes
-# clearok() and wrefresh() functions (or remove -DNOWREFRESH if the linker
-# complains that it can't find these functions).
-#
-# Please report modifications, failures (preferably with fixes) or successes
-# to the author.
-#
-# SECURE TARGETS
-# These are described after the next section. Search for ******* below.
-#
-# TARGETS FOR DIFFERENT UNIX PLATFORMS AND VERSIONS:
-#
-# + Marks those that have been built successfully for C-Kermit 8.0 or later.
-# - Those that once built OK but no longer do (e.g. too big).
-# ? Those that worked in a previous version but have not been tested recently.
-# --------------------------
-# ? for 386BSD (Jolix) 0.0, 0.1, "make 386bsd" (see comments in entry),
-# or (preferably, if it works) "make bsd44" or "make bsd44c".
-# ? for Acorn RISCiX, "make riscix" or "make riscix-gcc"
-# ? for Alliant FX/8 with Concentrix 4.1 or later, "make bsdlck"
-# ? for Altos 486, 586, 986 with Xenix 3.0, "make altos"
-# ? for Altos ACS68000, 8Mhz 68000, UNIX System 3 Rel 2, 512K, "make altos3"
-# ? for Amdahl UTS 2.4 on IBM 370 series & compatible mainframes, "make uts24"
-# ? for Amdahl UTSV IBM 370 series & compatible mainframes, "make utsv"
-# ? for Amdahl UTSV IBM 370 series mainframes with TCP/IP, "make utsvtcp"
-# ? for Amdahl mainframes with UNIX System V R 5.2.6b 580, "make sys3"
-# ? for Apollo Aegis 9.x, DOMAIN/IX 9.x, "make aegis"
-# (Last tested in C-Kermit 5A(189))
-# ? for Apollo DOMAIN/IX, if the above fails, try "make apollobsd"
-# ? for Apollo with SR10.0 or later, BSD environment, "make sr10-bsd"
-# ? for Apollo with SR10.0 or later, System V environment, "make sr10-s5r3"
-# ? for Apple Macintosh II with A/UX pre-3.0, "make aux", "auxgcc" or "auxufs"
-# ? for Apple Macintosh with A/UX 3.0 and gcc, "make aux3gcc" or aux3gccc
-# ? for Apple PowerMac with MkLinux, "make mklinux" (read Linux entry first)
-# + for Apple PowerMac with LinuxPPC, "make linuxppc"
-# ? for Apple Macintosh with Minix 1.5.10, "make minix68k" or "make minixc68"
-# + for Apple Macintosh with Mac OS X 1.0 (Rhapsody), "make macosx10"
-# (no curses), "make macosx10c" (curses), or "make macosx10nc" (ncurses).
-# Or "make macosx10ncx" (ncurses but "make macosx10nc" doesn't work).
-# + for Apple Macintosh with Mac OS X 10.2, "make macosx102nc" (ncurses).
-# + for Apple Macintosh with Mac OS X 10.3, "make macosx103"
-# ? for Arix System 90 with AT&T SVR3, "make sys5r3na"
-# - for AT&T 6300 with IN/ix, "make sys5"
-# - for AT&T 6300 PLUS, "make att6300" or (with no debugging) "make att6300nd"
-# ? for AT&T 6386 WGS UNIX PC, "make sys5r3"
-# + for AT&T 3B2, 3B20 systems, "make att3b2".
-# for AT&T 3B1, 7300 UNIX PC (see notes with the entries):
-# In C-Kermit 7.0, only the gcc entries work:
-# + "make sys3upcg", "make sys3upcgc", "make att351gm"
-# The others fail with "too many defines" (usually in ckuusr.h):
-# - "make sys3upc", "make sys3upcold", "make sys3upcc", "make sys3upcx",
-# "make sys3upcm", "make att351m"
-# ? for AT&T System III/System V R2 or earlier, "make sys3" or "make sys3nid"
-# ? for AT&T System III/System V with Honey DanBer UUCP, "make sys3hdb"
-# ? for AT&T System V on DEC VAX, "make sys3" or "make sys5r3"
-# + for AT&T System V R3, use "make sys5r3" or "make sys5r3c"
-# + for AT&T System V/386 R3.2 built on Interactive 4.1.1, "make sys5r32is".
-# ? for AT&T System V/386 R320.0 Versyss Systems, use "make sys5r3"
-# or "make sys5r3c".
-# + for AT&T System V R4, "make sys5r4", "make sys5r4sx", or "make sys5r4nx",
-# or if the ANSI C function prototyping makes trouble, add -DNOANSI,
-# as in "sys5r4sxna" entry
-# + for AT&T (USL) System V R4.2 use the sys5r4* entries.
-# ? for Atari Falcon with MiNT, "make posix"
-# ? for Atari ST with Minix ST 1.5.10.3, "make minix68k" or "make minixc68"
-# ? for BBN C/70 with IOS 2.0, "make c70"
-# ? for BeBox with Be OS 1.x DR7, "make beboxdr7"
-# Compiles OK but doesn't link with default linker which is limited to 64K.
-# Links OK with "Code Warrior Gold". Many hacks in the source code need
-# to be removed when DR8 and later come out.
-# (Last tested in C-Kermit 6.0)
-# - for BeBox with Be OS 1.x DR8, "make bebox"
-# (Needed functions missing from operating system and/or not working.)
-# - for Bell Labs UNIX Version 6 (6th Edition), there is no makefile entry.
-# ? for Bell Labs UNIX Version 7 (7th Edition), "make v7" (but see notes below)
-# (last built successfully in C-Kermit 5A188)
-# ? for Bell Labs Research UNIX Version 10, "make bellv10"
-# (last built successfully in C-Kermit 6.0)
-# ? for Bell Labs / Lucent Plan 9, use separate makefile ckpker.mk:
-# can be built for Intel, MIPS, 680x0, and PowerPC (last built C-Kermit 7.0)
-# + for BSDI BSD/386 1.x, "make bsdi"
-# + for BSDI BSD/OS 2.x, "make bsdi2"
-# + for BSDI BSD/OS 3.0 or 3.1, "make bsdi3"
-# + for BSDI BSD/OS 4.x, "make bsdi4"
-# + for BSDI BSD/OS 4.x, to build a binary that also works on FreeBSD,
-# "make bsdix".
-# ? for Berkeley Unix 2.4, "make v7" (but read v7 material below)
-# ? for Berkeley Unix 2.9 (DEC PDP-11 or Pro-3xx), "make bsd29"
-# - for Berkeley Unix 2.10, use ckubs2.mak (a separate makefile)
-# - for Berkeley Unix 2.11, use ckubs2.mak (a separate makefile)
-# This makefile is too big. Read the instructions in ckubs2.mak.
-# "make -f ckubs2.mak bsd210" or "make -f ckubs2.mak bsd211".
-# (last built successfully in C-Kermit 6.0 - later versions too big)
-# + for Berkeley Unix 2.11 "make -f ckubs2.mak bsd210noicp" (no command parser)
-# ? for Berkeley Unix 4.1, "make bsd41"
-# + for Berkeley Unix 4.2 on VAX, "make bsd42" or "make bsd42c"
-# ? for Berkeley Unix 4.2 or 4.3 with HoneyDanBer UUCP, "make bsdhdb"
-# + for Berkeley Unix 4.3 on VAX, "make bsd43", "make bsd43nc".
-# + for Berkeley Unix 4.3 on VAX, no networking "make bsd43nonet.
-# + for Berkeley Unix 4.3 without acucntrl program, "make bsd42" or "bsd42c"
-# NOTE: all the C-Kermit 7.0 full builds for old BSDs fail with
-# "too many defines" in CPP, even on big architectures like VAX. This
-# can be worked around with a clever ruse. See comments at target.
-# + for Berkeley Unix 4.3, command-line only, "make bsdm".
-# + for Berkeley Unix 4.3-Tahoe, same as 4.3 BSD
-# + for Berkeley Unix 4.3-Reno, "make bsd43" or "make bsd44" or "make bsd44c"
-# + for Berkeley Unix 4.3-Carson City, "make bsd44" or "make bsd44c"
-# + for Berkeley Unix 4.4-Networking/2 or -Alpha, "make bsd44" or "make bsd44c"
-# + for Berkeley Unix 4.4, "make bsd44" or "make bsd44c"
-# + for Berkeley Unix 4.4-Lite, "make bsd44" or "make bsd44c"
-# ? for Bull DPX/2 with BOS/X, "make bulldpx2"
-# ? for Cadmus, "make sys3"
-# for Caldera, see SCO, Linux.
-# ? for Callan Unistar, "make sys3"
-# ? for CDC VX/VE 5.2.1 System V emulation, "make vxve"
-# ? for Charles River Data Systems Universe 680x0 with UNOS 9.2, maybe
-# also other UNOS versions, "make crds"
-# ? for CIE Systems 680/20 with Regulus, "make cie"
-# + for Commodore Amiga 3000UX Sys V R4, "make sys5r4sx"
-# + for Commodore Amiga 3000UX Sys V R4 and TCP/IP, "make svr4amiganet"
-# ? for Commodore Amiga with Minix 1.5.10, "make minix68k" of "make minixc68"
-# ? for Concurrent/Masscomp with RTU 4.0 or later, BSD environment, "make
-# rtubsd", "make rtubsd2", "make rtubsd3" (depending on where ndir.h
-# is stored, see entries below).
-# ? for Concurrent/Masscomp with RTU 4.0 or later, System V R2, "make rtus5"
-# ? for Concurrent (Perkin-Elmer) 3200 series, "make sys5".
-# ? for Concurrent (Perkin-Elmer) 3200 series with <dirent.h>, "make ccop1"
-# + for Concurrent PowerMAX OS SVR4, "make powermax"
-# ? for Consensys UNIX SV/386 R4V3, "make sys5r4sxtcpc" or "make sys5r4sx"
-# ? for Convergent with CTIX Sys V R2, "make sys5"
-# ? for Convergent with CTIX 6.4.1, "make ctix"
-# ? for Convex C1, "make convex"
-# ? for Convex C210 with Convex/OS 8, "make convex8"
-# ? for Convex C2 with Convex/OS 9.1, "make convex9"
-# ? for Convex C2 with Convex/OS 10.1 and gcc 2.x, "make convex10gcc"
-# ? for Cray Research X/MP or YMP or C90 with UNICOS 6.x (System V R3),
-# "make cray"
-# ? for Cray Research X/MP or YMP or C90 with UNICOS 7.x (System V R4),
-# "make cray"
-# ? for Cray Research X/MP or YMP or C90 with UNICOS 8.0 Alpha, "make cray8"
-# ? for Cray Research X/MP or Y-MP or C90 with UNICOS 9.0, "make cray9"
-# ? for Cray Computer Cray-2 or Cray3 with CSOS, "make craycsos"
-# ? for Cyber 910 (Silicon-Graphics Iris) with Irix 3.3, "irix33"
-# ? for Data General AViiON with DG/UX 5.4 before R3.00, "make dgux540"
-# or "make dgux540c" (compile ckwart separately if necessary)
-# + for DG/UX 5.4 on AViiON Intel models, "make dgux540i" or dgux540ic.
-# ? for DG/UX 5.4R4.11 on AViiON, all models, "make dgux54411"
-# + for DG/UX 5.4R4.20 on AViiON, all models, "make dgux54420"
-# + for Data General AViiON with DG/UX 4.3x using Sys V-isms, "make dgux430"
-# ? for Data General AViiON with DG/UX 4.3x using BSD-isms, "make dgux430bsd"
-# ? for Data General AViiON, earlier UNIX versions,
-# "make sys5r3" (maybe compile ckwart separately, or "touch ckcpro.c")
-# ? for Data General MV systems with DG/UX, ???
-# ? for Data General MV systems with MV/UX, use AOS/VS C-Kermit (CKDKER.MAK)
-# ? for Data General MV systems with AOS/VS, use CKDKER.MAK (last = C-K 7.0)
-# for DEC PDP-11 with Berkeley UNIX 2.x, see Berkeley UNIX 2.x.
-# ? for DEC PDP-11 with Mini-UNIX (Bell 6th Edition for PDP-11 with no MMU),
-# probably no way to fit C-Kermit without I&D space.
-# ? for DEC PDP-11 with Ultrix-11 3.x, ??? (probably needs overlays)
-# ? for DEC VAX with Ultrix 1.x "make bsd"
-# ? for DEC VAX with Ultrix 2.x "make ultrix2x"
-# ? for DEC VAX or DECstation with Ultrix 3.0, 3.1, "make ultrix3x"
-# ? for DECstation or VAX with Ultrix 4.0 or 4.1, "make ultrix40"
-# ? for DECstation or VAX with Ultrix 4.2, "make ultrix42" or "make ultrix42c"
-# ? for DECstation or VAX with Ultrix 4.x, POSIX world, "make posix"
-# + for DECstation or VAX with Ultrix 4.3, "make ultrix43".
-# + for DECstation or VAX with Ultrix 4.4, "make ultrix44".
-# ? for DECstation 5000/50, /150 or /260 (R4x00 MIPS CPU), Ultrix 4.3A or later
-# "make ultrix43-mips3" or "make ultrix43c-mips3"
-# ? for DECstation (MIPS) with Berkeley Sprite, "make bsd44"?
-# ? for DECstation (MIPS) with OSF/1 V1.0 to 1.3, "make dec-osf"
-# ? for DEC Alpha with OSF/1 1.0 to 1.3, "make dec-osf"
-# ? for DEC PC 486 with OSF/1, "make dec-osf"
-# ? for DEC Alpha with OSF/1 2.x, "make dec-osf20"
-# + for DEC Alpha with OSF/1 3.0, "make dec-osf30"
-# + for DEC Alpha with Digital UNIX 3.2, "make du32"
-# + for DEC Alpha with Digital UNIX 4.0-4.0D, "make du40" or "make du40gcc"
-# + for DEC Alpha with Digital UNIX 4.0E or higher, see Tru64.
-# - for DEC Pro-350 with Pro/Venix V1.x, "make provx1" (version 5A is too big)
-# ? for DEC Pro-380 with Pro/Venix V2.0 (Sys V), "make sys3" or "make sys3nid"
-# ? for DEC Pro-380 with 2.9, 2.10, or 2.11 BSD, "make bsd29" or "make bsd210"
-# for DEC PDP-11 with 2.xBSD (use separate makefile ckubs2.mak)
-# ? for Dell UNIX Issue 2.x (= USL Sys V/386 R4.x + fixes), "make dellsys5r4"
-# or "make dellsys5r4c" (last tested in C-Kermit 5A).
-# ? for DIAB DS90 with DNIX (any version) create an empty <sys/file.h> if
-# this file does not already exist (or add -DNOFILEH to the make entry).
-# ? for DIAB DS90 with DNIX 5.2 (Sys V.2) or earlier, "make dnix",
-# "make dnixnd", or (to add curses and TCP/IP) "make dnixnetc",
-# ? for DIAB DS90 with DNIX 5.3 (Sys V.3), "make dnix5r3"
-# ? for DIAB DS90 with DNIX 5.3 (Sys V.3) and TCP/IP, "make dnix5r3net"
-# ? for DIAB DS90 with DNIX 5.3 2.2 (Sys V.3), ANSI C, "make dnix5r3ansi"
-# or, to include TCP/IP, "make dnix5r3ansinet",
-# but you have to fix a bug in /usr/include/stdlib.h first:
-# change "extern void free(char *str);" to "extern void free(void *str);"
-# ? for Dolphin Server Technology Triton 88/17 with SV/88 R3.2, "make sv88r32"
-# ? for Encore Multimax 310, 510 with Umax 4.2, "make umax42"
-# ? for Encore Multimax 310, 510 with Umax 4.3, "make umax43"
-# ? for Encore Multimax 310, 510 with Umax V 2.2, use Berkeley cc, "make bsd"
-# ? for Encore 88K with Umax V 5.2, "make encore88k"
-# ? for ESIX System V R4.0.3 or 4.04 with TCP/IP support, "make esixr4"
-# NOTE: You can also build on Unixware 2.x with "make esixr4", and run
-# on ESIX, but there you must first:
-# ln /usr/lib/libsocket.so /usr/lib/libsocket.so.1
-# ln /usr/lib/libnsl.so /usr/lib/libnsl.so.1
-# (This worked for C-Kermit 6.0 but does not work for 7.0)
-# (But you can probably still build a non-networking version this way)
-# ? for Everex STEP 386/25 Rev G with ESIX Sys V R3.2D, "make sys5r3"
-# ? for Fortune 32:16, For:Pro 1.8, "make ft18"
-# ? for Fortune 32:16, For:Pro 2.1, "make ft21"
-# ? for FPS 500 with FPX 4.1, "made bsd"
-# + for FreeBSD 1.0, "make freebsd1"
-# + for FreeBSD 2.x, "make freebsd2" (ncurses) or "make freebsd2c" (curses)
-# + for FreeBSD 3.x, "make freebsd3" (ncurses) or "make freebsd3c" (curses)
-# + for FreeBSD 4.0, "make freebsd4"
-# + for FreeBSD 4.1, "make freebsd41"
-# + for FreeBSD 4.2, "make freebsd42"
-# + for FreeBSD 4.3, "make freebsd43"
-# + for FreeBSD 4.4, "make freebsd44"
-# + for FreeBSD 4.5, "make freebsd45"
-# + for FreeBSD 4.6, "make freebsd46"
-# + for FreeBSD 4.7, "make freebsd47"
-# + for FreeBSD 4.8, "make freebsd48"
-# + for FreeBSD 4.9, "make freebsd49"
-# ? for FreeBSD 5.0, "make freebsd50"
-# ? for FreeBSD 5.1, "make freebsd51"
-# ? for Harris HCX-2900, "make sys5r3"
-# ? for Harris Night Hawk 88K or 68K with CX/UX pre-6.1, "make sys5r3"
-# ? for Harris Night Hawk 88K or 68K with CX/UX 6.1 or later, "make cx_ux"
-# ? for Heurikon, "make sys3"
-# ? for HP-3000, MPE/ix, "make posix"?
-# + for HP-9000 Series 300 with 4.4BSD, "make bsd44"
-# + for HP-9000 Series 500, HP-UX 5.21 and no networking "make hpux0500"
-# + for HP-9000 Series 500, HP-UX 5.21 with WIN/TCP 1.2 "make hpux0500wintcp"
-# + for HP-9000 Series, HP-UX 6.5, without long filenames,
-# "make hpux0650" or "make hpux0650c"
-# + for HP-9000 Series, HP-UX 7.0 or later no long filenames, "make hpux0700sf"
-# or (to include tcp/ip, curses, etc) "make hpux0700sftcpc"
-# + for HP-9000 Series with HP-UX 7.0, TCP/IP,long filenames,"make hpux0700lfn"
-# + for HP-9000 300/400 Series (680x0) with HP-UX 8.0, TCP/IP, "make hpux0800"
-# or "make hpux0800c"
-# + for HP-9000 700/800 Series (PA-RISC), HP-UX 8.0, TCP/IP, "make hpux0800pa"
-# or "make hpux0800pac"
-# + for HP-9000 Series with HP-UX 8.0, no TCP/IP, long filenames,
-# "make hpux0800notcp"
-# + for HP-9000 Series, HP-UX 9.0 - 9.10, TCP/IP, curses, restricted compiler
-# (no optimization, no ANSI), all models, "make hpux0900". Read the
-# hpux0900 entry below for more info.
-# + for HP-9000 700 and 800 Series, HP-UX 9.x, TCP/IP, curses,
-# HP optimizing ANSI C compiler, "make hpux0900o700".
-# + for HP-9000 with Motorola CPUs, HP-UX 9.x, TCP/IP, curses,
-# HP optimizing ANSI C compiler, "make hpux0900mot".
-# + for HP-9000 on other CPUs, HP-UX 9.x, TCP/IP, curses,
-# HP optimizing ANSI C compiler, "make hpux0900o".
-# + for HP-9000 series, HP-UX 9.x, TCP/IP, curses, gcc, all models,
-# "make hpux0900gcc"
-# + for HP-9000 700/800 Series, HP-UX 10.00,10.01,10.10,10.20,10.30, TCP/IP,
-# curses, restricted compiler (no optimization, no ANSI) "make hpux1000".
-# + for HP-9000 700/800 Series, HP-UX 10.00,10.01,10.10,10.20,10.30, TCP/IP,
-# curses, HP ANSI/optimizing compiler "make hpux1000o" or "make hpux1000o+"
-# + for HP-9000 HP-UX 10.00 or later with gcc, "make hpux1000gcc"
-# + for Trusted HP-UX 10.xx "make hpux1000t", "make hpux1000to",
-# or make hpux1000to+"
-# + for HP-9000 700/800 Series, HP-UX 11.00,TCP/IP,curses, restricted compiler
-# (no optimization, no ANSI) "make hpux1100".
-# + for HP-9000 700/800 Series, HP-UX 11.00,TCP/IP,curses, restricted compiler
-# HP ANSI/optimizing compiler "make hpux1100o" or "make hpux1100o+"
-# + for Trusted HP-UX 11.xx "make hpux1100t", "make hpux1100to",
-# make hpux1100to+"
-# + for HP-9000 PA-RISC models with NeXTSTEP 3.3, "make nextquadfat".
-# + for HP-9000 PA-RISC models with OPENSTEP/Mach 4.1, "make nextquadfat".
-# ? for IBM 370 Series with IX/370, "make ix370"
-# ? for IBM 370 Series with AIX/370 1.2, "make aix370"
-# ? for IBM 370 Series with AIX/370 3.0, "make aix370"
-# ? for IBM 370 Series with AIX/ESA 2.1, "make aixesa"
-# - for IBM PC/AT 286 & compatibles with Mark Williams Coherent OS,
-# command-line-only version, "make coherent" (version 5A & later too big)
-# ? for IBM PC 386 & compatibles with Mark Williams Coherent OS,
-# minimum interactive version, "make coherentmi"
-# ? for IBM PC 386 & compatibles with Mark Williams Coherent OS,
-# full interactive version, prior to v4.2, "make coherentmax"
-# + for IBM PC 386 & compatibles with Mark Williams Coherent OS 4.2,
-# "make coherent42"
-# ? for IBM PC 386 & compatibles with LynxOS 2.0 or 2.1, "make lynx21"
-# ? for IBM PC 386 & compatibles with LynxOS 2.2, "make lynx"
-# - for IBM PC/AT & compatibles with original MINIX, "make minix" (too big)
-# ? for IBM PC family, 386-based, with MINIX/386 1.5, "make minix386"
-# or if you have GNU CC, "make minix386gcc"
-# + for IBM PC family, 386-based, with MINIX 2.0, "make minix20"
-# + for IBM PS/2 with PS/2 AIX 1.0, 1.1, or 1.2, "make ps2aix" or ps2aixnetc.
-# ? for IBM PS/2 with PS/2 AIX 1.3, "make ps2aix3"
-# ? for IBM RISC System/6000 with AIX 3.0, "make aix30"
-# ? for IBM RISC System/6000 with AIX 3.1.x, "make aix31"
-# + for IBM RISC System/6000 with AIX 3.2.0 thru 3.2.5, "make aix32"
-# + for IBM RS/6000 or Power Series with AIX 4.1.x, "make aix41"
-# + for IBM RS/6000 or Power Series with AIX 4.1.x with gcc, "make aix41g"
-# + for IBM RS/6000 or Power Series with AIX 4.1 with X.25, "make aix41x25"
-# + for IBM RS/6000 or Power Series with AIX 4.2, "make aix42"
-# + for IBM RS/6000 or Power Series with AIX 4.3, "make aix43" (or aix43gcc)
-# + for IBM RS/6000 or Power Series with AIX 4.4, "make aix44" (or aix44gcc)
-# + for IBM RS/6000 or Power Series with AIX 4.5, "make aix45" (or aix45gcc)
-# + for IBM RS/6000 or Power Series with AIX 5.0, "make aix50" (or aix50gcc)
-# + for IBM RS/6000 or Power Series with AIX 5.1, "make aix51" (or aix51gcc)
-# ? for IBM RS/6000 or Power Series with AIX 5.2, "make aix52" (or aix52gcc)
-# ? for IBM RS/6000 or Power Series with AIX 5.3, "make aix53" (or aix53gcc)
-# ? for IBM RT PC with AIX 2.1, "make sys3"
-# + for IBM RT PC with AIX 2.2.1, "make rtaix" or "make rtaixc"
-# ? for IBM RT PC with ACIS 4.2, "make bsd"
-# ? for IBM RT PC with ACIS 4.3, "make rtacis" or "make bsd KFLAGS=-DNOANSI"
-# ? for IBM RT PC with 4.3BSD/Reno, "make bsd44" or "make bsd44c"
-# ? for ICL DRS400 or 400E, "make iclsys5r3"
-# ? for ICL DRS3000 (80486) with DRS/NX, "make iclsys5r4_486"
-# ? for ICL DRS6000 (SPARC) with DRS/NX, "make iclsys5r4"
-# + for ICL DRS6000 (SPARC) with DRS/NX 4.2MP 7MPlus, "make iclsys5r4m+"
-# ? Ditto but with IKSD support included, "make iclsys5r4m+iksd"
-# ? for Integrated Solutions Inc V8S VME 68020, "make isi"
-# ? for Intel 302 with Bell Tech Sys V/386 R3.2, "make sys5r3"
-# ? for Intel Xenix/286, "make sco286"
-# ? for Interactive System III (PC/IX), "make pcix" or "make is3"
-# ? for Interactive System III (PC/IX) with gcc, "make is3gcc"
-# ? for Interactive 386/ix 1.0.6 with TCP/IP networking, "make is5r3net2"
-# ? for Interactive 386/ix 2.0.x, "make is5r3" or (POSIX) "make is5r3p"
-# ? for Interactive 386/ix 2.0.x with TCP/IP networking, "make is5r3net"
-# or "make is5r3net2"
-# ? for Interactive 386/ix 2.2.1, job control, curses, no net, gcc,
-# "make is5r3gcc"
-# + for Interactive UNIX Sys V R3.2 V2.2 - 4.0 without TCP/IP, "make is5r3jc"
-# + for Interactive UNIX Sys V R3.2 V2.2 - 4.0 with TCP/IP, "make is5r3netjc"
-# + for Intergraph Clipper, "make clix" or "make clixnet"
-# ? for Jolix (see 386BSD)
-# + for Red Hat Linux 7.1 (and higher) fully configured (krb5, SSL, etc):
-# "make redhat71", "make redhat72", "make redhat73", "make redhat80"
-# "make redhat9"
-# NOTE: You must use this target for Red Hat 7.1 since it
-# also includes a workaround for its broken curses library.
-# WARNING: These targets create binaries that include code for
-# strong encryption and are therefore not exportable. DO NOT PUT
-# THESE BINARIES ON US OR CANADIAN WEB OR FTP SITES.
-# + for Linux 1.2 and later, "make linux". Uses ncurses. This version
-# handles serial speeds up to 460800 bps, Linux FSSTD 1.2, TCP/IP, and
-# should work on both libc and glibc systems. For static linking, use
-# "make linux LNKFLAGS=-static". Please read the comments that accompany
-# the linux entry.
-# + for Linux builds that fail with "sys/select.h: No such file or directory",
-# "make linuxns"
-# + for Linux 1.2 and later but with curses.h and libcurses (rather than
-# ncurses.h and libncurses), use "make linuxc".
-# + for Linux 1.2 and later with no curses support at all, "make linuxnc".
-# + for Linux on PowerMac (Mklinux DR3), "make mklinux".
-# + for Linux 1.2 and later, to build with egcs, "make linuxegcs".
-# + for Linux with no TCP/IP, "make linuxnotcp"
-# + for Linux with lcc compiler, no TCP/IP, "make linuxnotcp-lcc"
-# ? for Linux 1.0 or earlier, "make linux10", or (to remove TCP/IP)
-# "make linuxnotcp".
-# IMPORTANT: Read the comments that accompany the "linux:" entry.
-# ? for Mach 2.6 on (anything, e.g. DECstation), "make bsd42" or "make bsd43".
-# ? for MachTen (Tenon) 2.1.1.D on (e.g.) Apple Powerbook, "make machten".
-# ? for Masscomp RTU AT&T System III, "make rtu"
-# for other Masscomp, see Concurrent.
-# ? for Microport SV/AT (System V R2), "make mpsysv" (last edit tested: 144)
-# ? for Microport SVR4 2.2, 3.1, or 4.1 "make sys5r4sx"
-# ? for Microsoft,IBM Xenix (/286, PC/AT, etc), "make xenix" or "make sco286"
-# ? for MIPS System with RISC/os (UMIPS) 4.52 = AT&T SVR3, "make mips"
-# or "make mipstcpc"
-# + for MkLinux on Power Macintosh, "make mklinux"
-# ? for Modcomp 9730, Real/IX, "make sys5r3" (or modify to use gcc = GLS cc)
-# ? for Modcomp Realstar 1000 with REAL/IX D.1, "make sv88r32"
-# ? for Motorola Four Phase, "make sys3" or "make sys3nid"
-# + for Motorola Delta System V/68 R3, "make sv68r3"
-# + for Motorola Delta System V/68 R3V5, "make sv68r3v5"
-# + for Motorola Delta System V/68 R3V5.1, "make sv68r3v51"
-# + for Motorola Delta System V/68 R3V6 with NSE TCP/IP, "make sv68r3v6"
-# + for Motorola Delta System V/88 R32, "make sv88r32"
-# + for Motorola Delta System V/88 R40, "make sv88r40"
-# ? for Mt Xinu Mach386 on 386/486-based PCs, "make bsd43"
-# ? for NCR Tower 1632, OS 1.02, "make tower1"
-# ? for NCR Tower 1632 or Minitower with System V R2, "make sys3"
-# or "make sys3nv"
-# ? for NCR Tower 32, OS Release 1.xx.xx, "make tower32-1"
-# ? for NCR Tower 32, OS Release 2.xx.xx, "make tower32-2"
-# ? for NCR Tower 32, OS Releases based on Sys V R3, "make tower32"
-# ? for NCR Tower 32, OS Releases based on Sys V R3 with gcc "make tower32g"
-# ? for NCR System 3000, AT&T UNIX System V R4 2.0, "make sys5r4sxna"
-# ? for NCR System 3000, AT&T UNIX System V R4 2.0 with Wollongong TCP/IP,
-# "make sys5r4net2" or "make sys5r4net2c".
-# Some header files might be misplaced; try this:
-# ln /usr/include/netinet/in.h /usr/include/sys/in.h
-# ln /usr/include/arpa/inet.h /usr/include/sys/inet.h
-# ln /usr/include/sys/termiox.h /usr/include/termiox.h
-# ? for NCR System 3000, NCR UNIX 02.02.01, same as above.
-# + for NCR MP-RAS System V R4 V2.03 or 3.02, "make mpras" or "make mprastcpc"
-# + for NetBSD through 1.4.x on any architecture, "make netbsd"
-# + for NetBSD 1.5.0 and later, "make netbsd15"
-# + for NeXT with NeXTSTEP 1.0 through 3.2, "make next" (on a NeXT)
-# + for NeXT with NeXTSTEP 3.3, "make next33"
-# ? for NeXT with OPENSTEP/Mach 4.1, "make nextquadfat".
-# + for NeXT with OPENSTEP/Mach 4.2, "make openstep42".
-# ? for NeXTSTEP/486, "make next" (on a PC)
-# ? for NeXTSTEP portable binary (runs on Intel or Motorola), "make nextfat"
-# ? for NeXTSTEP portable binary (Intel, Motorola, HP PA-RISC, or SPARC),
-# "make nextquadfat"
-# ? for Nixdorf Targon/31, "make t31tos40x"
-# ? for Norsk Data Uniline 88/17 with SV/88 R3.2, "make sv88r32"
-# for Novell UnixWare - see UnixWare
-# ? for OSF/1 (vanilla, from OS/F), "make posix"
-# ? for OkiStation 7300 Series, "make sys5r4sxtcp"
-# ? for Olivetti LSX-3020 with X/OS R.2.3, "make xos23" or "make xos23c"
-# + for OpenBSD, "make openbsd" (also see secure targets listed below).
-# ? for OPENSTEP/Mach 4.1, "make nextquadfat" (NeXT, Intel, PA-RISC, SPARC)
-# + for OPENSTEP/Mach 4.2, "make openstep42" (tested on NeXT)
-# ? for Perkin-Elmer (Concurrent) 3200 series, "make sys5".
-# ? for Perkin-Elmer (Concurrent) 3200 series with <dirent.h>, "make ccop1"
-# ? for Perkin-Elmer/Concurrent 3200 with Xelos R02, "make ccop1"
-# ? for PFU Compact A Series SX/A TISP V10/E50 (Japan), "make sxae50"
-# ? for Plexus, "make sys3"
-# + for Pyramid 9XXX (e.g. 9845) or MIServer T series, OSx 4.4b thru 5.1,
-# "ucb make pyramid" or for HDB UUCP, "ucb make pyramid-hdb" or:
-# + for Pyramid MIServer S or ES Series, DataCenter/OSx, "make pyrdcosx"
-# + for Pyramid MIS-S MIPS R3000, DataCenter OSx System V R4, "make pyrdcosx"
-# + for POSIX on anything, "make posix" (but adjustments might be necessary).
-# ? for Prime 8000 MIPS, SVR3, "make mips" or "make mipstcpc"
-# - for QNX 2.x (sorry we don't have a version of C-Kermit for QNX 2.x)
-# ? for QNX 4.0 or 4.1, 16-bit, on 286 PC, Watcom C 8.5, "make qnx16_41"
-# + for QNX 4.21 - 4.22A (286+), and 4.23 (386+), or higher, 16-bit,
-# Watcom C 9.5x or higher, "make qnx16"
-# + for QNX 4.21-4.25, 32-bit, 386 or above, Watcom C 10.6, "make qnx32"
-# NOTE: ("make qnx" == "make qnx32")
-# ? for QNX Neutrino 2+, "make qnx_nto2+" (crosscompiled on QNX4 with Watcom C)
-# + for QNX 6 = Neutrino 2.xx, "make qnx6"
-# ? for Ridge 32 (ROS3.2), "make ridge32"
-# ? for Samsung MagicStation, "make sys5r4"
-# ? for SCO Xenix 2.2.1 with development system 2.2 on 8086/8 "make sco86"
-# ? for SCO Xenix/286 2.2.1 with development system 2.2 on 80286, "make sco286"
-# NOTE: reportedly this makefile is too long for SCO Xenix/286 make, but it
-# works with "makeL", or if some of the other make entries are edited out.
-# ? for SCO Xenix/386 2.2.2, "make sco386"
-# ? for SCO Xenix/386 2.3.x, "make sco3r2"
-# ? for SCO Xenix/386 SCO 2.3.3 or 2.3.4 with gcc 1.37 or later,
-# "make sco386gcc" or (to add curses) "make sco386gccc".
-# ? for SCO Xenix/386 or UNIX/386 with Excelan TCP/IP, "make sco3r2net"
-# or (to add curses support) "make sco3r2netc" or "sco386netc"
-# + for SCO XENIX 2.3.4, "make sco234" or "make sco234c" to add curses.
-# + for SCO XENIX 2.3.4 with SCO TCP/IP & curses, "make sco234netc".
-# ? for SCO Xenix 2.3.x with Racal-InterLan TCP/IP, "make sco3r2netri"
-# for other UNIX varieties with Racal Interlan TCP/IP, read sco3r2netri entry
-# ? for SCO Xenix 2.3.x with SCO (Lachman) TCP/IP, "make sco3r2lai"
-# or (to add curses) "make sco3r2laic"
-# for SCO UNIX... ALSO READ COMMENTS in the SCO UNIX entries for more info!
-# ? for SCO UNIX/386 3.2.0 or 3.2.1, "make sco3r2" or "make sco3r2x"
-# ? for SCO UNIX/386 3.2.2, "make sco3r22" or "make sco3r22gcc"
-# or "make sco3r22c"
-# ? for SCO UNIX/386 3.2.2 with SCO TCP/IP, "make sco3r22net"
-# or "make sco3r22netc" (curses)
-# ? for SCO ODT 1.1, "make sco3r22net" or "make sco3r22netc" (curses)
-# + for SCO UNIX/386 3.2 V4.x, no network support, "make sco32v4"
-# + or "make sco32v4ns" (this one uses no select() or sockets library)
-# + for SCO UNIX/386 3.2 V4.x with TCP/IP, "make sco32v4net"
-# (also sco32v4gcc, sco32v4netgcc)
-# + for SCO UNIX/386 3.2 V5.0 - see SCO OpenServer.
-# + for SCO UNIX 3.2v4.x with TCP/IP, <dirent.h> for Extended Acer File
-# System (EAFS), curses, ANSI C compilation, "make sco32v4net"
-# + or (to use select()-based CONNECT module) "make sco32v4netx".
-# + for SCO UNIX 3.2v4.2, "make sco-odt30" (includes TCP/IP).
-# + for SCO MPX 3.0 - The SCO UNIX binary runs on the corresponding MPX system.
-#
-# NOTE: Also see below for other entries that are variations on these.
-# Also be sure to read the comments accompanying each SCO entry.
-# Also see Unixware section.
-#
-# + for SCO ODT 2.0, "make sco32v4net"
-# + for SCO ODT 3.0, "make sco-odt30"
-# + for SCO OpenServer 5.0 (OSR5), "make sco32v500"
-# + for SCO OpenServer 5.0 (OSR5) with networking, "make sco32v500net"
-# + for SCO OpenServer 5.0 (OSR5), gcc, "make sco32v500gcc"
-# + for SCO OpenServer 5.0 (OSR5), gcc, with networking, "make sco32v500netgcc"
-# + for SCO OpenServer 5.0 (OSR5), as above, ELF, "make sco32v500netgccelf"
-# + for SCO OpenServer 5.0.2, use "make sco32v502xxx" entries as above.
-# + for SCO OpenServer 5.0.4, use "make sco32v504xxx" entries as above.
-# + for SCO OpenServer 5.0.5, use "make sco32v505xxx" entries as above.
-# Use the sco32v505udkxxx entries if you have the UDK rather than /bin/cc.
-# + for SCO OpenServer 5.0.6, use "make sco32v506xxx" entries as above.
-# + for SCO OpenServer 5.0.6a,use "make sco32v506axxx" entries as above.
-# + for SCO OpenServer 5.0.7, use "make sco32v507", "make sco32v507net"
-# ? for SCO (Univel) UnixWare 1.x, "make unixware" or "make unixwarenetc".
-# If there are problems with this in C-K 7+ see notes at unixware entry.
-# + for SCO UnixWare 2.0.x, "make uw20"
-# + for SCO UnixWare 2.1.0, "make uw21"
-# + for SCO UnixWare 2.1.3, "make uw213"
-# + for SCO UnixWare 7, "make uw7"
-# + for SCO UnixWare 7 with IKSD support, "make uw7iksd" or "make uw7iksdudk"
-# + for SCO UnixWare 7 with OpenSSL, "make uw7ssl"
-# + for SCO (Caldera) Open UNIX 8, "make ou8"
-# + for Sharp Zaurus SL5500 PDA, "make zsl5500".
-# ? for Sequent with DYNIX/ptx 1.2.1, "make dynixptx12"
-# ? for Sequent with DYNIX/ptx 1.3 or 1.4 with TCP/IP, "make dynixptx13"
-# ? for Sequent with DYNIX/ptx 2.0 or 2.1 with TCP/IP, "make dynixptx20"
-# or "dynixptx20c"
-# + for Sequent with DYNIX/ptx 2.1.6 on i486, "dynixptx216c"
-# ? for Sequent with DYNIX/ptx V4.1.3 with TCP/IP, "make dynixptx41c"
-# + for Sequent with DYNIX/ptx V4.4.2 with TCP/IP, "make dynixptx44"
-# ? for Sequent Balance 8000 or B8 with DYNIX 3.0.xx, "make dynix3"
-# or "make dynix3noacu"
-# ? for Sequent Symmetry S81 with DYNIX 3.0.xx, "make dynix3"
-# ? for Sequent DYNIX 3.1.xx, "make dynix31" or "make dynix31c"
-# + for Siemens/Nixdorf SINIX-L Intel V5.41, "make sinix541i"
-# + for Siemens/Nixdorf SINIX-N MIPS V5.42, "make sinix542"
-# + for Siemens/Nixdorf SINIX-P MIPS V5.42 with gcc, "make sinix542g"
-# + for Siemens/Nixdorf SINIX-Z Intel V5.42, "make sinix542i"
-# + for Siemens/Nixdorf Reliant UNIX V5.43, "make sni543"
-# + for Siemens/Nixdorf Reliant UNIX V5.44, "make sni544"
-# ? for Silicon Graphics Iris System V IRIX 3.2 or earlier, "make iris"
-# ? for Silicon Graphics Sys V R3 with IRIX 3.3 or later, "make sys5r3"
-# ? for Silicon Graphics Iris Indigo with IRIX 4.0 or 5.0, "make irix40" or
-# (to include Yellow Pages and Curses) "make irix40ypc"
-# ? for Silicon Graphics Iris Indigo or Elan with IRIX 4.0.x with microcode
-# optimization and -O4, "make irix40u" or "irix40uc" (and read notes
-# accompanying these entries).
-# + for Silicon Graphics IRIX 5.1, "make irix51" or "irix51x" (no optimize)
-# + for Silicon Graphics IRIX 5.2, "make irix52"
-# + for Silicon Graphics IRIX 5.3, "make irix53" or "irix53x" (no optimize)
-# + for Silicon Graphics IRIX 6.0, "make irix60".
-# + for Silicon Graphics IRIX 6.2, "make irix62".
-# + for Silicon Graphics IRIX 6.3, "make irix63".
-# + for Silicon Graphics IRIX 6.4, "make irix64" or "make irix64gcc".
-# + for Silicon Graphics (SGI) IRIX 6.5, "make irix65" or "make irix65mips2"
-# ? for Solaris 2.0-2.3 on SPARC or Intel, SunPro CC, "make solaris2x",
-# ? or to add SunLink X.25 8.0x support, "make solaris2x25".
-# + for Solaris 2.4 built with gcc, "make solaris24g".
-# + for Solaris 2.0-2.3 on SPARC or Intel, GNU CC, "make solaris2xg".
-# + for Solaris 2.4 with X.25, "make solaris24x25".
-# + for Solaris 2.5 on SPARC or Intel, SunPro CC, "make solaris25".
-# + or to add SunLink X.25 8.0x support, "make solaris25x25".
-# + for Solaris 2.5 on SPARC or Intel, GNU CC, "make solaris25g".
-# + for Solaris 2.6 on SPARC or Intel, "make solaris26".
-# + for Solaris 7 on SPARC or Intel, SunPro CC, "make solaris7".
-# + for Solaris 7 on SPARC or Intel, GNU CC, "make solaris7g".
-# + for Solaris 8 on SPARC or Intel, SunPro CC, "make solaris8".
-# + for Solaris 8 on SPARC or Intel, GNU CC, "make solaris8g".
-# + for Solaris 9 on SPARC (or Intel?), 32-bit, SunPro CC, "make solaris9".
-# + for Solaris 9 on SPARC (or Intel?), 32-bit, GNU CC, "make solaris9g".
-# + for Solaris 9 on SPARC (or Intel?), 64-bit, GNU CC, "make solaris9g64".
-# + for Solbourne 4/500 with OS/MP 4 "make sunos4"
-# + for Solbourne 4/500 with OS/MP 4.1 "make sunos41" or "make sunos41c"
-# ? for SONY NEWS with NEWS-OS 4.0.1C, "make sonynews"
-# ? for SONY NEWS with NEWS-OS 4.1.2C, "make sonynews"
-# ? for Sperry/UNISYS 5000/20, UTS V 5.2 3R1, "make sys5"
-# ? for Sperry/UNISYS 5000/30/35/50/55, UTS V 5.2 2.01, "make unisys5r2"
-# ? for Sperry/UNISYS 5000/80 with System V R3, "make sys5r3"
-# ? for Sperry/UNISYS 5000/95 with System V R3, "make sys5r3"
-# For UNISYS SVR3 it might be necessary to "make sys5r3 KFLAGS=-UDYNAMIC"
-# ? for Stardent 1520, "make sys5r3"
-# ? for Stratus FTX 2.x, try "make ftx" or else "make sys5r4" or "sys5r4sx"
-# + for Stratus FTX 3.x, PA-RISC 1.0 or 2.0, "make ftx" or "make ftxtcp"
-# ? for Sun with Sun UNIX 3.5 and gcc, "make sunos3gcc"
-# ? for Sun with pre-4.0 SunOS versions, "make bsd" (or appropriate variant)
-# ? for Sun with SunOS 4.0, BSD environment, "make sunos4"
-# ? for Sun with SunOS 4.0, BSD, with SunLink X.25, make sunos4x25
-# + for Sun with SunOS 4.1 or 4.1.1, BSD environment, "make sunos41"
-# or "make sunos41c" (curses) or "make sunos41gcc" (compile with gcc)
-# + for Sun with SunOS 4.1.x, BSD, with SunLink X.25 7.00 or earlier,
-# "make sunos41x25" or "make sunos41x25c" (curses)
-# + for Sun with SunOS 4.1, 4.1.1, AT&T Sys V R3 environment, "make sunos41s5"
-# + for Sun with SunOS 4.1.2, "make sunos41" or any of its variations.
-# NOTE: All SunOS 4.x systems -- Shared libraries are used by default.
-# If this causes problems, add -Bstatic to CFLAGS.
-# NOTE2: When building C-Kermit under SunOS for the BSD universe,
-# but /usr/5bin/cc is ahead of /usr/ucb/cc in your PATH, add
-# "CC=/usr/ucb/cc CC2=/usr/ucb/cc" to the make entry.
-# NOTE3: If an executable built on one type of Sun hardware does not work
-# on another type, rebuild the program from source on the target machine.
-# for Sun with Solaris 1.x use SunOS 4.1 entries.
-# for Sun with Solaris 2.0 and higher use Solaris entries.
-# + for Sun SPARC with Linux, "make linux"
-# ? for Sun SPARC with OPENSTEP/Mach 4.1, "make nextquadfat"
-# ? for Sun SPARC with OPENSTEP/Mach 4.2, "make openstep42"
-# - for Tandy 16/6000 with Xenix 3.0, "make trs16" (C-Kermit 7.0 is too big)
-# ? for Tektronix 6130/4132/43xx (e.g.4301) with UTek OS, "make utek"
-# or (for models without hardware flow control), "make uteknohwfc"
-# ? for Tektronix XD88 series with UTekV OS, "make utekvr3"
-# ? for Tri Star Flash Cache with Esix SVR3.2, "make sys5r3"
-# + for Tru-64 UNIX 4.0E, "make tru64-40e"
-# + for Tru-64 UNIX 4.0F, "make tru64-40f"
-# + for Tru-64 UNIX 4.0G, "make tru64-40g"
-# + for Tru-64 UNIX 5.0A, "make tru64-50a"
-# + for Tru-64 UNIX 5.1A, "make tru64-51a"
-# ? for Unistar, "make sys5"
-# ? for Unisys S/4040 68040 CTIX SVR3.2 6.4.1, "make ctix" or "make sys5r3"
-# ? for Unisys U5000 UNIX SVR3 6.x, "make sys5r3" or "make sys5r3c"
-# ? for Unisys U6000 UNIX SVR4 1.x, "make sys5r4nx" or "make sys5r4nxnetc"
-# for Unisys ... (also see Sperry)
-# for Univel - see UnixWare
-# for Unixware - see SCO
-# ? for Valid Scaldstar, "make valid"
-# ? for Whitechapel MG01 Genix 1.3, "make white"
-# ? for Zilog ZEUS 3.21, "make zilog"
-#
-# The result should be a runnable program called "wermit" in the current
-# directory. After satisfactory testing, you can rename wermit to "kermit"
-# and put it where users can find it.
-#
-# To remove intermediate and object files, "make clean".
-# If your C compiler produces files with an extension other than "o",
-# then "make clean EXT=u", "make clean EXT=s", or whatever.
-#
-# To run lint on the source files, "make lintsun", "make lintbsd",
-# "make lints5", as appropriate.
-#
-# ******************************
-# SECURE TARGETS
-#
-# Beginning with C-Kermit 7.0, secure targets are included, as are the
-# source modules (ckuat*.[ch], ck_*.[ch]) needed to build them. Secure
-# target names are like the regular names, but with security features
-# indicated by plus (+) signs. The features are:
-#
-# krb4 MIT Kerberos IV
-# krb5 MIT Kerberos V
-# openssl OpenSSL (SSL/TLS)
-# zlib ZLIB compression for SSL/TLS
-# srp Stanford Secure Remote Password
-# pam PAM (pluggable authentication module)
-# shadow Shadow Password File
-#
-# You can build these targets if you have the Kermit source files and the
-# required libraries (Kerberos, OpenSSL, SRP, etc) and header files. See:
-# http://www.columbia.edu/kermit/security.html
-# for specific details regarding supported versions.
-#
-# NOTE: OpenSSL 0.9.6 and earlier are not compatible with 0.9.7 and later.
-# C-Kermit code is designed for 0.9.6. To build with 0.9.7 you must add
-# -DOPENSSL_097 to avoid missing symbols in the DES library and to use the
-# entry points that were renamed to avoid conflict with Kerberos 4.
-#
-# In OpenSSL builds add -ldl if you get unresolved references for
-# dlopen, dlclose, dlsym, and/or dlerror.
-#
-# The following symbols are used to specify library and header file locations
-# Redefine them to the values used on your system by:
-# . editing this file
-# . defining the values on the command line
-# . defining the values in the environment and use the -e option
-#
-prefix = /usr/local
-srproot = $(prefix)
-sslroot = $(prefix)
-manroot = $(prefix)
-
-K4LIB=-L/usr/kerberos/lib
-K4INC=-I/usr/kerberos/include
-K5LIB=-L/usr/kerberos/lib
-K5INC=-I/usr/kerberos/include
-SRPLIB=-L$(srproot)/lib
-SRPINC=-I$(srproot)/include
-SSLLIB=-L$(sslroot)/ssl/lib
-SSLINC=-I$(sslroot)/ssl/include
-#
-# aix41+krb5+krb4: IBM AIX 4.1 with Kerberos IV and V
-# aix43gcc+krb5+krb4: IBM AIX 4.3 built with gcc, ditto
-# aix43gcc+krb5+krb4+openssl: Ditto, plus OpenSSL (SSL/TLS)
-# aix43gcc+openssl: IBM AIX 4.3 with OpenSSL
-# freebsd44+srp+openssl FreeBSD 4.4 with SRP and OpenSSL
-# freebsd50+openssl FreeBSD 5.0 with OpenSSL
-# hpux1100o+openssl: HP-UX 11.xx with OpenSSL
-# hpux1000gcc+openssl: HP-UX 10.xx with OpenSSL (build with gcc)
-# hpux1100gcc+openssl: HP-UX 11.xx with OpenSSL (build with gcc)
-# irix6x+krb5: IRIX 6.x with Kerberos V
-# irix65+krb5: etc etc...
-# linux+krb5:
-# linux+krb5+krb4:
-# linux+srp:
-# linux+srp+pam:
-# linux+srp+gmp:
-# linux+srp+gmp+no-des:
-# linux+srp+gmp-export:
-# linux+srp+gmp+pam:
-# linux+shadow+pam:
-# linux+openssl:
-# linux+openssl+shadow:
-# linux+openssl+zlib+shadow+pam:
-# linux+srp+openssl:
-# linux+krb5+krb4+srp:
-# linux+krb5+krb4+srp+openssl:
-# linux+krb5+krb4+openssl:
-# linux+krb5+krb4+openssl+shadow:
-# linux+krb5+krb4+openssl+zlib+shadow:
-# linux+krb5+krb4+srp-export:
-# linux+krb5+krb4+srp+pam:
-# linux+krb5+krb4+srp+openssl+pam-debug:
-# linux+krb5+krb4+srp+openssl+pam:
-# linux+krb5+krb4+srp+openssl+zlib+pam:
-# linux+krb5+krb4+openssl+shadow+pam:
-# linux+krb5+openssl+zlib+shadow+pam:
-# openbsd30+ssl (includes OpenSSL):
-# redhat71, redhat72, redhat73, redhat80, redhat9
-# (Krb5, OpenSSL, Showdow, PAM, Zlib)
-# sco32v500net+ssl:
-# sco32v505net+ssl:
-# solaris2x+krb4:
-# solaris2xg+krb4:
-# solaris2xg+openssl+pam+shadow:
-# solaris2xg+openssl+zlib+pam+shadow:
-# solaris2xg+krb5+krb4+openssl+shadow:
-# solaris25+krb4:
-# solaris25g+krb4:
-# solaris26g+openssl:
-# solaris8g+openssl+zlib+pam+shadow:
-# solaris8g+krb4:
-# solaris9g+openssl+zlib+pam+shadow:
-# solaris9g+openssl+shadow+pam+zlib
-# sunos41gcc+krb4: SunOS 4.1 built with gcc with Kerberos IV
-# sunos41gcc+openssl: SunOS 4.1 built with gcc with OpenSSL
-# sunos41gcc+krb4+openssl: ...with Kerberos IV and OpenSSL
-# sunos41gcc+krb4+openssl+zlib: ditto, plus ZLIB compression
-# sunos41gcc+krb4+srp+openssl+zlib: ditto, plus SRP
-# sunos41gcc+srp+openssl+zlib:
-# uw7ssl
-#
-##############################################################################
-#
-# NOTES FOR V7 AND 2.X BSD (BASED ON VERSION 4E OF C-KERMIT, 1987):
-#
-# For Unix Version 7, several variables must be defined to the values
-# associated with your system. BOOTNAME=/edition7 is the kernel image on
-# okstate's Perkin-Elmer 3230. Others will probably be /unix. PROCNAME=proc
-# is the name of the structure assigned to each process on okstate's system.
-# This may be "_proc" or some other variation. See <sys/proc.h> for more
-# info on your systems name conventions. NPROCNAME=nproc is the name of a
-# kernel variable that tells how many "proc" structures there are. Again
-# this may be different on your system, but nproc will probably be somewhere.
-# The variable NPTYPE is the type of the nproc variable -- int, short, etc.
-# which can probably be gleaned from <sys/param.h>. The definition of DIRECT
-# is a little more complicated. If nlist() returns, for "proc" only, the
-# address of the array, then you should define DIRECT as it is below. If
-# however, nlist() returns the address of a pointer to the array, then you
-# should give DIRECT a null definition (DIRECT= ). The extern declaration in
-# <sys/proc.h> should clarify this for you. If it is "extern struct proc
-# *proc", then you should NOT define DIRECT. If it is "extern struct proc
-# proc[]", then you should probably define DIRECT as it is below. See
-# ckuv7.hlp for further information.
-#
-# For 2.9 BSD, the makefile may use pcc rather than cc for compiles; that's
-# what the CC and CC2 definitions are for (the current version of the
-# makefile uses cc for both; this was tested in version 4E of C-Kermit and
-# worked OK on the DEC Pro 380, but all bets are off for version 5A). 2.9
-# support basically follows the 4.1 path. Some 2.9 systems use "dir.h" for
-# the directory header file, others will need to change this to "ndir.h".
-#
-# The v7 and 2.9bsd versions assume I&D space on a PDP-11. When building
-# C-Kermit for v7 on a PDP-11, you should probably add the -i option to the
-# link flags. Without I&D space, overlays will be necessary (if available),
-# or code segment mapping (a`la Pro/Venix) if that's available.
-#
-# C-Kermit 5A (and 6.0?) can be built for 2.10 and 2.11BSD, using overlays,
-# but a separate makefile is used because this one is too big.
-#
-##############################################################################
-#
-# V7-specific variables.
-# These are set up for Perkin-Elmer 3230 V7 Unix:
-#
-PROC=proc
-DIRECT=
-NPROC=nproc
-NPTYPE=int
-BOOTFILE=/edition7
-#
-# ( For old Tandy TRS-80 Model 16A or 6000 V7-based Xenix, use PROC=_proc,
-# DIRECT=-DDIRECT, NPROC=_Nproc, NPTYPE=short, BOOTFILE=/xenix )
-#
-###########################################################################
-#
-# Compile and Link variables:
-#
-# EXT is the extension (file type) for object files, normally o.
-# See MINIX entry for what to do if another filetype must be used.
-#
-EXT=o
-#LNKFLAGS=
-SHAREDLIB=
-CC= cc
-CC2= cc
-MAKE= make
-SHELL=/bin/sh
-
-###########################################################################
-# SAMPLE INSTALLATION SCRIPT
-#
-# Modify to suit your own computer's file organization and permissions. If
-# you don't have write access to the destination directories, "make install"
-# fails. In most cases, a real installation also requires you to chown /
-# chgrp the Kermit binary for the UUCP lockfile and/or tty devices, and
-# perhaps also to chmod +s the corresponding permission fields.
-#
-# Default binary, man, and doc directories are supplied below. You can
-# override them in your 'make' command. Examples:
-#
-# make install # Accept defaults.
-# make "INFODIR=/usr/share/lib/kermit" install # Override INFODIR default.
-#
-# You can also build and install in one step, e.g.:
-#
-# make solaris8 install
-#
-# If you use the 'install' target to install C-Kermit, it creates an
-# UNINSTALL script that can be used to uninstall it.
-#
-WERMIT = makewhat
-BINARY = wermit
-DESTDIR =
-BINDIR = $(prefix)/bin
-MANDIR = $(manroot)/man/man1
-MANEXT = 1
-SRCDIR =
-INFODIR =
-CERTDIR =
-
-TEXTFILES = COPYING.TXT ckcbwr.txt ckubwr.txt ckuins.txt ckccfg.txt \
- ckcplm.txt ckermit.ini ckermod.ini ckermit70.txt ckermit80.txt
-
-ALL = $(WERMIT)
-
-all: $(ALL)
-
-.c.o:
- $(CC) $(CFLAGS) -DKTARGET=\"$(KTARGET)\" -c $<
-
-#Clean up intermediate and object files
-clean:
- @echo 'Removing object files...'
- -rm -f ckcmai.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
-ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckcpro.$(EXT) ckcfns.$(EXT) \
-ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) ckucon.$(EXT) ckutio.$(EXT) \
-ckufio.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) ckwart.$(EXT) ckuusx.$(EXT) \
-ckuusy.$(EXT) ckcnet.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) ckusig.$(EXT) \
-ckucns.$(EXT) ckcmdb.$(EXT) ckuath.$(EXT) ckctel.$(EXT) ckclib.$(EXT) \
-ckcuni.$(EXT) ck_crp.$(EXT) ck_ssl.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \
-ckcpro.c wart
-
-# Install C-Kermit after building -- IMPORTANT: Read the instructions above
-# (SAMPLE INSTALLATION SCRIPT). For SSL/TLS versions, ca_certs.pem file
-# should be installed in the appropriate place for your OpenSSL library, e.g.:
-#
-# cp ca_certs.pem /usr/local/ssl/
-# cp ca_certs.pem /usr/share/ssl/
-#
-# To make sure 'man' notices the new source file and doesn't keep
-# showing the old formatted version, remove the old formatted version,
-# something like this:
-# rm -f $(MANDIR)/../cat$(MANEXT)/kermit.$(MANEXT)
-# or this (which requires CATDIR to be defined):
-# rm -f $(CATDIR)/kermit.$(MANEXT)
-#
-# As of C-Kermit 8.0.205 this target also builds an UNINSTALL script, and
-# so it might be too long for some old Bourne shells, in which case you can
-# use a different shell:
-#
-# make SHELL=ksh install
-# make SHELL=/bin/posix/sh install
-#
-install:
- @echo Installing C-Kermit version $(CKVER)...;\
- rm -f UNINSTALL;\
- exec 3>./UNINSTALL;\
- echo "# C-Kermit UNINSTALL script" >&3;\
- echo "# `date`\n" >&3;\
- echo "CKVER=$(CKVER)" >&3;\
- echo "PrN Uninstalling C-Kermit version $(CKVER)..." >&3;\
- echo DESTDIR=$(DESTDIR);\
- if test -n "$(DESTDIR)"; then\
- if test -d $(DESTDIR); then\
- echo "$(DESTDIR) exists...\n";\
- else\
- echo "Creating $(DESTDIR)...";\
- DESTDIR=`echo $(DESTDIR) | sed 's!/*$$!!'`;\
- mkdir $$DESTDIR || exit 1;\
- fi;\
- chmod 755 $(DESTDIR) || exit 1;\
- fi;\
- echo BINARY=$(BINARY);\
- if test -f $(BINARY); then\
- ls -l $(BINARY);\
- else\
- echo "?$(BINARY) not found";\
- exit 1;\
- fi;\
- if test -z "$(DESTDIR)$(BINDIR)"; then\
- echo "Binary directory not specified";\
- exit 1;\
- fi;\
- if test -d $(DESTDIR)$(BINDIR); then\
- echo "$(DESTDIR)$(BINDIR) exists...";\
- else\
- echo "Creating $(DESTDIR)$(BINDIR)/...";\
- mkdir $(DESTDIR)$(BINDIR) || exit 1;\
- chmod 755 $(DESTDIR)$(BINDIR);\
- fi;\
- rm -f $(DESTDIR)$(BINDIR)/kermit;\
- cp $(BINARY) $(DESTDIR)$(BINDIR)/kermit || exit 1;\
- chmod 755 $(DESTDIR)$(BINDIR)/kermit || exit 1;\
- rm -f $(DESTDIR)$(BINDIR)/kermit-sshsub;\
- ln -s $(DESTDIR)$(BINDIR)/kermit\
- $(DESTDIR)$(BINDIR)/kermit-sshsub || exit 1;\
- echo 'set flag=f\nPrC Removing binaries' >&3;\
- echo "RmF $(DESTDIR)$(BINDIR)/kermit-sshsub" >&3;\
- echo "RmF $(DESTDIR)$(BINDIR)/kermit" >&3;\
- if test -f ckermit.ini; then\
- echo "#!$(DESTDIR)$(BINDIR)/kermit" >\
- $(DESTDIR)$(BINDIR)/_tmp.ini;\
- cat ckermit.ini >> $(DESTDIR)$(BINDIR)/_tmp.ini;\
- mv $(DESTDIR)$(BINDIR)/_tmp.ini\
- $(DESTDIR)$(BINDIR)/ckermit.ini;\
- chmod 755 $(DESTDIR)$(BINDIR)/ckermit.ini;\
- echo "RmF $(DESTDIR)$(BINDIR)/ckermit.ini" >&3;\
- fi;\
- echo;\
- echo 'EfM' >&3;\
- echo "Kermit binary installed:";\
- ls -l $(DESTDIR)$(BINDIR)/kermit\
- $(DESTDIR)$(BINDIR)/kermit-sshsub\
- $(DESTDIR)$(BINDIR)/ckermit.ini;\
- echo;\
- echo " WARNING: If C-Kermit is to be used for dialing out,";\
- echo " you must change its owner and group and permissions";\
- echo " to match the 'cu' program. See the ckuins.txt file";\
- echo " for details.";\
- echo;\
- echo MANDIR=$(MANDIR);\
- if test -n "$(MANDIR)"; then\
- if test -d $(MANDIR); then\
- echo "$(MANDIR) exists...";\
- else\
- echo "Creating $(MANDIR)...";\
- mkdir $(MANDIR) || exit 1;\
- chmod 755 $(MANDIR) || exit 1;\
- fi;\
- echo "Installing man page...";\
- rm -f $(MANDIR)/kermit.$(MANEXT);\
- cp ckuker.nr $(MANDIR)/kermit.$(MANEXT) || exit 1;\
- chmod 644 $(MANDIR)/kermit.$(MANEXT) || exit 1;\
- echo 'set flag=f\nPrC Removing man pages' >&3;\
- echo "RmF $(MANDIR)/kermit.$(MANEXT)" >&3;\
- echo 'EfM' >&3;\
- echo;\
- else\
- echo "Not installing man page!\n";\
- fi;\
- echo CERTDIR=$(CERTDIR);\
- if test -n "$(CERTDIR)"; then\
- if test -f ca_certs.pem; then\
- if test -d $(CERTDIR); then\
- echo "$(CERTDIR) exists...";\
- else\
- echo "Creating $(CERTDIR)...";\
- mkdir $(CERTDIR) || exit 1;\
- chmod 755 $(CERTDIR) || exit 1;\
- fi;\
- echo "Installing certificates file...";\
- cp ca_certs.pem $(CERTDIR) || exit 1;\
- echo 'set flag=f' >&3;\
- echo 'PrC Removing certificates file' >&3;\
- echo "RmF $(CERTDIR)/ca_certs.pem" >&3;\
- echo 'EfM' >&3;\
- echo;\
- fi;\
- else\
- echo "Not installing certificates file!\n";\
- fi;\
- echo SRCDIR=$(DESTDIR)$(SRCDIR);\
- if test -n "$(SRCDIR)"; then\
- echo "Installing source files...";\
- if test -d $(DESTDIR)$(SRCDIR); then\
- echo "$(DESTDIR)$(SRCDIR) exists...";\
- else\
- echo "Creating $(DESTDIR)$(SRCDIR)/...";\
- mkdir $(DESTDIR)$(SRCDIR) || exit 1;\
- chmod 755 $(DESTDIR)$(SRCDIR);\
- fi;\
- echo "Copying source files to $(DESTDIR)$(SRCDIR)...";\
- echo 'set flag=f\nPrC Removing source files' >&3;\
- for TextFile in COPYING.TXT ck[cuw_]*.[cwh] makefile; do\
- cp $$TextFile $(DESTDIR)$(SRCDIR)/ && echo ".\c";\
- echo "RmF $(DESTDIR)$(SRCDIR)/$$TextFile" >&3;\
- done; echo;\
- echo 'EfM' >&3;\
- ( cd $(DESTDIR)$(SRCDIR)/ &&\
- ls -l COPYING.TXT ck[cuw_]*.[cwh] makefile );echo;\
- else\
- echo "Not installing source code!\n";\
- fi;\
- echo INFODIR=$(DESTDIR)$(INFODIR);\
- if test -n "$(INFODIR)"; then\
- echo "Installing info files...";\
- if test -d $(DESTDIR)$(INFODIR); then\
- echo "$(DESTDIR)$(INFODIR) exists...";\
- else\
- echo "Creating $(DESTDIR)$(INFODIR)/...";\
- mkdir $(DESTDIR)$(INFODIR) || exit 1;\
- chmod 755 $(DESTDIR)$(INFODIR);\
- fi;\
- echo "Copying text files to $(DESTDIR)$(INFODIR)...";\
- echo 'set flag=f\nPrC Removing text files' >&3;\
- FileCopyList='';\
- for TextFile in $(TEXTFILES); do\
- test -f $$TextFile || continue;\
- cp $$TextFile $(DESTDIR)$(INFODIR) && echo ".\c" &&\
- FileCopyList="$$FileCopyList $$TextFile";\
- echo "RmF $(DESTDIR)$(INFODIR)/$$TextFile" >&3;\
- done; echo;\
- echo 'EfM' >&3;\
- ( cd $(DESTDIR)$(INFODIR)/ && chmod 644 $$FileCopyList );\
- ( cd $(DESTDIR)$(INFODIR)/ && pwd && ls -l $$FileCopyList );\
- else\
- echo "Not installing text files!\n";\
- fi;\
- echo "set flag=d\nPrN Removing empty dirs..." >&3;\
- echo "RmD $(DESTDIR)$(BINDIR)" >&3;\
- echo "RmD $(DESTDIR)$(SRCDIR)" >&3;\
- echo "RmD $(DESTDIR)$(INFODIR)" >&3;\
- echo "RmD $(CERTDIR)" >&3;\
- echo "RmD $(MANDIR)" >&3;\
- echo "RmD $(DESTDIR)" >&3;\
- echo "EfM" >&3;\
- echo "PrN C-Kermit version $(CKVER) is uninstalled!" >&3;\
- echo C-Kermit version $(CKVER) installed!
-
-# UN-Install C-Kermit after building
-# Please to not remove the extra blanks before and after '{}' within the
-# functions. You would get syntax errors for some older Bourne shells! Best is
-# you don't change or remove anything.
-#
-uninstall:
- @if test ! -f UNINSTALL; then\
- echo "?C-Kermit UNINSTALL data file not found!";\
- exit 1;\
- fi; \
- X=`grep '^CKVER='$(CKVER)'$$' ./UNINSTALL || :`;\
- if test -z "$$X"; then\
- echo "?UNINSTALL file is not for C-Kermit version $(CKVER)";\
- exit 2;\
- fi;\
- PrN () { echo "$$*"; };\
- PrC () { echo "$$* \c"; };\
- RmF () { test -f "$$1" && rm -f "$$1" && echo ".\c" && flag=F ; };\
- RmD () { \
- dir=$$1;\
- while test -d "$$dir"; do\
- rmdir "$$dir" 2>&- || return && echo "$$dir" && flag=D;\
- dir=`echo "$$dir" | sed 's!/[^/]*/*$$!!'`;\
- done; \
- };\
- EfM () { \
- case "$$flag" in\
- f) echo "- Nothing to remove!";;\
- d) echo "Nothing to remove!";;\
- F) echo " done";;\
- D) echo "done";;\
- esac; \
- };\
- while read Act Args; do\
- case $$Act in\
- EfM) EfM;;\
- RmD) RmD $$Args;;\
- RmF) RmF $$Args;;\
- PrN) PrN $$Args;;\
- PrC) PrC $$Args;;\
- set) eval $$Args;;\
- esac;\
- done < ./UNINSTALL
-
-makewhat:
- @echo 'make what? You must tell which platform to make C-Kermit for.'
- @echo Examples: make linux, make hpux1100, make aix43, make solaris8.
- @echo Please read the comments at the beginning of the makefile.
-
-###########################################################################
-#
-# Dependencies Section:
-
-# Normal version
-
-wermit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucon.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT)
- $(CC2) $(LNKFLAGS) -o wermit \
- ckcmai.$(EXT) ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckcpro.$(EXT) ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) \
- ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) \
- ckuusx.$(EXT) ckuusy.$(EXT) ckuusr.$(EXT) ckucon.$(EXT) \
- ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \
- ckusig.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \
- $(LIBS)
-
-# Version with CONNECT module that uses select() instead of fork()
-
-xermit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) ckuath.$(EXT) \
- ck_crp.$(EXT) ck_ssl.$(EXT)
- $(CC2) $(LNKFLAGS) -o wermit \
- ckcmai.$(EXT) ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckcpro.$(EXT) ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) \
- ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) \
- ckuusx.$(EXT) ckuusy.$(EXT) ckuusr.$(EXT) ckucns.$(EXT) \
- ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckusig.$(EXT) \
- ckctel.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \
- ckuath.$(EXT) ck_crp.$(EXT) ck_ssl.$(EXT) $(LIBS)
-
-# Malloc Debugging version
-
-mermit: ckcmdb.$(EXT) ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckcpro.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) \
- ckuxla.$(EXT) ckucon.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
- ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \
- ckusig.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT)
- $(CC2) $(LNKFLAGS) -o mermit ckcmdb.$(EXT) ckclib.$(EXT) ckcmai.$(EXT)\
- ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
- ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckuusr.$(EXT) ckucon.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
- ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckcuni.$(EXT) \
- ckupty.$(EXT) ckcftp.$(EXT) $(LIBS)
-
-# Kerberized Version - Subject to USA export restrictions.
-
-# NOTE: We don't use this any more -- As of 15 Feb 2003, the "xermit"
-# target is used for both secure and regular version.
-
-krbmit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \
- ckcftp.$(EXT) ck_ssl.$(EXT)
- $(CC2) $(LNKFLAGS) -o krbmit ckcmai.$(EXT) ckclib.$(EXT) \
- ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
- ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
- ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
- ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \
- ck_ssl.$(EXT) $(LIBS)
-
-krbmit-debug: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckcpro.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) \
- ckuxla.$(EXT) ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
- ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \
- ckusig.$(EXT) ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) \
- ckupty.$(EXT) ck_ssl.$(EXT) ckcmdb.$(EXT) ckcftp.$(EXT)
- $(CC2) $(LNKFLAGS) -o krbmit ckcmdb.$(EXT) ckcmai.$(EXT) \
- ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) \
- ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) \
- ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) \
- ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) \
- ckuusy.$(EXT) ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \
- ckcftp.$(EXT) ck_ssl.$(EXT) $(LIBS)
-
-# SRP(TM) Version - Subject to USA export restrictions.
-
-srpmit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \
- ckcftp.$(EXT) ck_ssl.$(EXT)
- $(CC2) $(LNKFLAGS) -o srpmit ckcmai.$(EXT) ckclib.$(EXT) \
- ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
- ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
- ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
- ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ck_ssl.$(EXT) \
- ckcftp.$(EXT) $(LIBS)
-
-# Kerberized Version - Not subject to USA export restrictions.
-
-krbmit-export: ckcmai.$(EXT) \
- ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckuath.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT)
- $(CC2) $(LNKFLAGS) -o krbmit-export ckcmai.$(EXT) ckclib.$(EXT) \
- ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
- ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
- ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
- ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) $(LIBS)
-
-# SRP(TM) Version - Not subject to USA export restrictions.
-
-srpmit-export: ckcmai.$(EXT) \
- ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckuath.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT)
- $(CC2) $(LNKFLAGS) -o srpmit-export ckcmai.$(EXT) ckclib.$(EXT) \
- ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
- ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
- ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
- ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) $(LIBS)
-
-###########################################################################
-# man page...
-#
-ckuker.nr:
- @echo This target is obsolete.
- @echo The ckuker.nr file no longer needs any preprocessing.
-
-###########################################################################
-# Dependencies for each module...
-#
-ckcmai.$(EXT): ckcmai.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcnet.h ckcsig.h \
- ckuusr.h ckctel.h ckclib.h
-
-ckclib.$(EXT): ckclib.c ckclib.h ckcdeb.h ckcasc.h ckcsym.h
-
-ckcpro.$(EXT): ckcpro.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckclib.h
-
-ckcpro.c: ckcpro.w wart ckcdeb.h ckcsym.h ckcasc.h ckcker.h ckcnet.h ckctel.h \
- ckclib.h
- ./wart ckcpro.w ckcpro.c
-
-ckcfns.$(EXT): ckcfns.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h ckcuni.h \
- ckuxla.h ckclib.h ckcnet.h
-
-ckcfn2.$(EXT): ckcfn2.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h \
- ckuxla.h ckctel.h ckclib.h ckcnet.h ckcuni.h
-
-ckcfn3.$(EXT): ckcfn3.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h \
- ckuxla.h ckclib.h ckcuni.h
-
-ckuxla.$(EXT): ckuxla.c ckcker.h ckcsym.h ckcdeb.h ckcxla.h ckuxla.h ckclib.h \
- ckcuni.h
-
-ckcuni.$(EXT): ckcuni.c ckcdeb.h ckcker.h ckucmd.h ckcuni.h ckcxla.h ckuxla.h
-
-ckuusr.$(EXT): ckuusr.c ckucmd.h ckcker.h ckuusr.h ckcsym.h ckcdeb.h ckcxla.h \
- ckuxla.h ckcasc.h ckcnet.h ckctel.h ckclib.h ckcuni.h
-
-ckuus2.$(EXT): ckuus2.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
- ckcasc.h ckcnet.h ckcsym.h ckctel.h ckclib.h ckcuni.h
-
-ckuus3.$(EXT): ckuus3.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
- ckcasc.h ckcnet.h ckcsym.h ckctel.h ckclib.h ckcuni.h
-
-ckuus4.$(EXT): ckuus4.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
- ckcasc.h ckcnet.h ckuver.h ckcsym.h ckctel.h ckclib.h ckcuni.h
-
-ckuus5.$(EXT): ckuus5.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcnet.h \
- ckcsym.h ckctel.h ckclib.h ckcxla.h ckuxla.h ckcuni.h
-
-ckuus6.$(EXT): ckuus6.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcnet.h \
- ckcsym.h ckctel.h ckclib.h
-
-ckuus7.$(EXT): ckuus7.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
- ckcasc.h ckcnet.h ckcsym.h ckctel.h ckclib.h ckcuni.h
-
-ckuusx.$(EXT): ckuusx.c ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcsym.h \
- ckcsig.h ckcnet.h ckctel.h ckclib.h ckcxla.h ckuxla.h ckcuni.h
-
-ckuusy.$(EXT): ckuusy.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \
- ckclib.h
-
-ckucmd.$(EXT): ckucmd.c ckcasc.h ckucmd.h ckcdeb.h ckcsym.h ckctel.h ckclib.h
-
-ckufio.$(EXT): ckufio.c ckcdeb.h ckuver.h ckcsym.h ckclib.h \
- ckcxla.h ckuxla.h ckcuni.h
-
-ckutio.$(EXT): ckutio.c ckcdeb.h ckcnet.h ckuver.h ckcsym.h ckctel.h ckclib.h
-
-ckucon.$(EXT): ckucon.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \
- ckclib.h
-
-ckucns.$(EXT): ckucns.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \
- ckclib.h ckcxla.h ckuxla.h ckcuni.h
-
-ckcnet.$(EXT): ckcnet.c ckcdeb.h ckcker.h ckcnet.h ckcsym.h ckcsig.h ckctel.h \
- ckclib.h
-
-ckctel.$(EXT): ckcsym.h ckcdeb.h ckcker.h ckcnet.h ckctel.h ckclib.h
-
-wart: ckwart.$(EXT)
- $(CC) $(LNKFLAGS) -o wart ckwart.$(EXT) $(LIBS)
-
-ckcmdb.$(EXT): ckcmdb.c ckcdeb.h ckcsym.h ckclib.h
-
-ckwart.$(EXT): ckwart.c
-
-ckudia.$(EXT): ckudia.c ckcker.h ckcdeb.h ckucmd.h ckcasc.h ckcsym.h ckcsig.h \
- ckcnet.h ckctel.h ckclib.h
-
-ckuscr.$(EXT): ckuscr.c ckcker.h ckcdeb.h ckcasc.h ckcsym.h ckcsig.h \
- ckcnet.h ckctel.h ckclib.h
-
-ckusig.$(EXT): ckusig.c ckcasc.h ckcdeb.h ckcker.h ckcnet.h ckuusr.h \
- ckcsig.h ckctel.h ckclib.h
-
-ckcftp.$(EXT): ckcftp.c ckcdeb.h ckcasc.h ckcker.h ckucmd.h ckuusr.h \
- ckcnet.h ckctel.h ckcxla.h ckuxla.h ckcuni.h
-
-ckupty.$(EXT): ckupty.c ckupty.h ckcdeb.h
-
-ckuath.$(EXT): ckuath.c ckcdeb.h ckucmd.h ckuath.h ckuat2.h ckctel.h \
- ckclib.h ckcnet.h
-
-ck_crp.$(EXT): ck_crp.c ckcdeb.h ckcnet.h ckuath.h ckclib.h
-
-ck_ssl.$(EXT): ck_ssl.c ckcdeb.h ckucmd.h ckuath.h ckuat2.h ckctel.h \
- ckclib.h ck_ssl.h
-
-###########################################################################
-#
-# Entries to make C-Kermit for specific systems.
-#
-# Put the ones that need short makefiles first.
-
-#Apollo Aegis 9.x. Includes TCP/IP support.
-#You can also add processor-dependent optimization switches like -M570.
-aegis:
- @echo Making C-Kermit $(CKVER) for Apollo Aegis 9.x...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DNOCSETS -DCK_CURSES -O $(KFLAGS)" \
- "LIBS = -lcurses -ltermcap"
-
-#Apple Mac II, A/UX pre-3.0
-#Warning, if "send *" doesn't work, try the auxufs makefile entry below.
-aux:
- @echo Making C-Kermit $(CKVER) for Macintosh A/UX...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DAUX -DTCPSOCKET $(KFLAGS) -i -O" "LNKFLAGS = -i"
-
-#Apple Mac II, A/UX pre-3.0, compiled with gcc
-auxgcc:
- @echo Making C-Kermit $(CKVER) for Macintosh A/UX...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DAUX -DTCPSOCKET -traditional $(KFLAGS) -i -O" \
- "LNKFLAGS = " "CC = gcc" "CC2 = gcc"
-
-#Apple Mac II, A/UX, pre-3.0, but with ufs file volumes, uses <dirent.h>.
-auxufs:
- @echo Making C-Kermit $(CKVER) for Macintosh A/UX...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DAUX -DTCPSOCKET -DDIRENT $(KFLAGS) -i -O" "LNKFLAGS = -i"
-
-#Apple Mac II, A/UX 3.0, compiled with gcc
-aux3gcc:
- @echo Making C-Kermit $(CKVER) for Macintosh A/UX 3.0...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DAUX -DHDBUUCP -DLFDEVNO -DTCPSOCKET -DDIRENT $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = $(LIBS)" \
- "CC=gcc -pipe -traditional" "CC2=gcc -pipe -traditional"
-
-#Apple Mac II, A/UX 3.0, compiled with gcc, uses curses
-aux3cgcc:
- @echo Making C-Kermit $(CKVER) for Macintosh A/UX 3.0...
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) aux3gcc \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DCK_CURSES" "LIBS = -lcurses $(LIBS)"
-
-# Tenon MachTen, tested on Apple Powerbook with MachTen 2.1.1.D.
-# NOTE: This doesn't do anything about UUCP. It only works if /usr/spool/uucp
-# has permission of 777, and dialout device is world read/writeable.
-machten:
- @echo Making C-Kermit $(CKVER) for MachTen...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD43 -DTCPSOCKET -DSIG_V -DNDGPWNAM -DCK_CURSES -O \
- $(KFLAGS)" "LIBS=-lcurses -ltermcap"
-
-#Bell Labs Research UNIX V10
-#Can't add TCP/IP because there is no sockets library. It would have to
-#be done using streams, but there is no code in C-Kermit for that.
-#Remove -DNOJC if desired (if your system has csh, ksh, or bash).
-bellv10:
- @echo Making C-Kermit $(CKVER) for Bell Labs Research UNIX V10...
- $(MAKE) wermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBELLV10 -DBSD4 -DNDIR -DNOJC -DNOSYSIOCTLH -DNOSETREU \
- -DNOCSETS -MINIDIAL $(KFLAGS)"
-
-# WARNING: The early BSD entries do not build in version 7.0 with the stock
-# BSD compiler: "Too many defines". Unless you can rebuild cpp to have more
-# space for defines, these builds must be accomplished by:
-# copying the /usr/include tree to someplace else, preprocessing there with cc
-# -E -I./include or whatever (plus all the same -D's, adding any necessary
-# -U/-D to override the architecture)), renaming the the resulting files back
-# to their original names, bringing them back to the original BSD system, and
-# running the make target there. This technique was used for 4.2 and 4.3 BSD
-# on a VAX in C-Kermit 7.0 (later, cpp on that machine was rebuilt to allow
-# more symbols, so the C-Kermit 8.0 build proceeds normally).
-
-#Berkeley Unix 4.1
-bsd41:
- @echo Making C-Kermit $(CKVER) for 4.1BSD...
- $(MAKE) wermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD41" "LIBS = -ljobs"
-
-#Berkeley 4.2, 4.3, also Ultrix-32 1.x, 2.x, 3.x, many others
-# Add -O, -s, etc, if they work.
-# If you have a version of BSD but signal() is void rather than int,
-# "make bsd KFLAGS=-DSIG_V".
-bsd42:
- @echo Making C-Kermit $(CKVER) for 4.2BSD...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DNOREALPATH -DNOTIMEH -DNOIKSD \
- -DCK_CURSES -DSYSTIMEBH -DNOPUTENV -DNOANSI -DBIGBUFOK -DBSD42HACK \
- $(KFLAGS)" "LIBS=-lcurses -ltermcap $(LIBS)"
-
-bsd:
- $(MAKE) CC=$(CC) CC2=$(CC2) bsd42 KTARGET=$${KTARGET-$(@)}
-
-#Berkeley Unix 4.2 or 4.3 with HoneyDanBer UUCP
-bsdhdb:
- @echo Making C-Kermit $(CKVER) for 4.2BSD with HDB UUCP...
- $(MAKE) CC=$(CC) CC2=$(CC2) bsd KTARGET=$${KTARGET-$(@)} \
- "KFLAGS= -DHDBUUCP $(KFLAGS)"
-
-#Berkeley Unix 4.3 with acucntrl program, curses, TCP/IP included.
-bsd43:
- @echo Making C-Kermit $(CKVER) for 4.3BSD...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DBSD43 -DTCPSOCKET -DNOREALPATH -DNOTIMEH -DNOIKSD \
- -DCK_CURSES -DACUCNTRL -DSYSTIMEBH -DNOPUTENV -DNOANSI -DBIGBUFOK \
- -DBSD42HACK $(KFLAGS)" "LIBS=-lcurses -ltermcap $(LIBS)"
-
-#4.3BSD, curses excluded
-bsd43nc:
- @echo Making C-Kermit $(CKVER) for 4.3BSD...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DBSD43 -DTCPSOCKET -DNOREALPATH -DNOTIMEH \
- -DACUCNTRL -DSYSTIMEBH -DNOIKSD -DNOPUTENV -DNOANSI -DBIGBUFOK \
- -DBSD42HACK $(KFLAGS)" "LIBS=$(LIBS)"
-
-#4.3BSD, TCP/IP excluded.
-bsd43nonet:
- @echo Making C-Kermit $(CKVER) for 4.3BSD + curses...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DBSD43 -DTCPSOCKET -DNOREALPATH -DNOTIMEH -DNOIKSD \
- -DCK_CURSES -DACUCNTRL -DSYSTIMEBH -DNOPUTENV -DNOANSI -DBIGBUFOK \
- -DBSD42HACK -DNONET $(KFLAGS)" "LIBS=-lcurses -ltermcap $(LIBS)"
-
-#Berkeley Unix 4.2 or 4.3 with lock directory /usr/spool/uucp/LCK/LCK..ttyxx,
-#but without acucntrl program
-bsdlck:
- @echo Making C-Kermit $(CKVER) for 4.2BSD, /usr/spool/uucp/LCK/...
- $(MAKE) CC=$(CC) CC2=$(CC2) bsd KTARGET=$${KTARGET-$(@)} \
- "KFLAGS= -DLCKDIR $(KFLAGS)"
-
-#Berkeley UNIX 4.4-Lite, 4.4-Encumbered, Net/2, etc (Post-Reno),
-#with TCP/IP networking. This was the basis for FreeBSD, NetBSD, OpenBSD,
-#BSDI, BSD/OS, and Mac OS X (each of which has its own set of targets that
-#are newer than this one).
-#
-#NOTE: This is not a pure POSIX configuration. Using -DPOSIX instead of
-# -DBSD44 prevents any kind of directory-reading (for wildcard expansion),
-#and disallows use of ENOTCONN symbol for detecting broken network
-#connections, and disallows RTS/CTS flow control, and would also require
-#definition of the appropriate UUCP lockfile convention.
-#Do not add -DCK_POSIX_SIG without reading <signal.h> first! For example,
-#sigsetjmp(), etc, tend to be defined but not implemented.
-#
-#NOTE: originally crypt was in libc - later it was unbundled.
-#Remove the LIBS clause to build on an early 4.4BSD platform.
-#
-bsd44:
- @echo Making C-Kermit $(CKVER) for 4.4BSD...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DTCPSOCKET $(KFLAGS) -O" "LIBS=-lcrypt"
-
-#Berkeley UNIX 4.4, as above, but with curses for fullscreen display
-#Please read notes for bsd44 entry just above.
-# NOTE: This one dumped core on the real 4.4BSD development system at
-# UC Berkeley (an HP-9000/300), so the no-curses version was used
-# for that one, which was unplugged years ago.
-bsd44c:
- @echo Making C-Kermit $(CKVER) for 4.4BSD with curses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET $(KFLAGS) -O" \
- "LIBS= -lcurses -ltermcap -lcrypt $(LIBS)"
-
-#For FreeBSD 1.x.
-freebsd1:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -funsigned-char \
- -DFNFLOAT -DNOHTERMCAP -DNOREALPATH -DNOSYSCONF $(KFLAGS) -O -pipe" \
- "LIBS= -lcurses -ltermcap -lm $(LIBS)"
-
-#FreeBSD 2.x with ncurses
-freebsd2:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 2.x with ncurses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DTCPSOCKET -DNOCOTFMC -DUSE_STRERROR \
- -DTPUTSARGTYPE=int -DTPUTSARG1CONST -DFREEBSD2 -funsigned-char \
- -DFNFLOAT $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -ltermlib -lcrypt -lm $(LIBS)"
-
-#For FreeBSD 2.x -- Uses curses rather than ncurses
-freebsd2c:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 2.x with curses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -DUSE_STRERROR \
- -DTPUTSARGTYPE=int -DTPUTSARG1CONST -DFREEBSD2 -DFNFLOAT \
- -funsigned-char $(KFLAGS) -O -pipe" \
- "LIBS= -lcurses -ltermlib -lcrypt -lm $(LIBS)"
-
-#FreeBSD 3.x with ncurses and uu_lock()
-#(Note: uu_lock() goes back to 2.2.2, but not necessarily 2.0)
-freebsd3:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 3.x with ncurses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DTCPSOCKET -DNOCOTFMC -funsigned-char \
- -DTPUTSARGTYPE=int -DUSE_STRERROR -DFREEBSD3 -DUSE_UU_LOCK -DFNFLOAT \
- $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#As above but with curses rather than ncurses.
-freebsd3c:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 3.x with curses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -DUSE_UU_LOCK \
- -DTPUTSARGTYPE=int -DUSE_STRERROR -DFREEBSD3 $(KFLAGS) -DFNFLOAT \
- -funsigned-char -pipe -O" \
- "LIBS= -lcurses -lcrypt -lutil -lm $(LIBS)"
-
-#FreeBSD 4.0 with ncurses and uu_lock(). Note - there is no curses in 4.0.
-#ncurses 5.0 is broken requiring us to work around with setbuf().
-freebsd4:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.x with ncurses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DTCPSOCKET -DNOCOTFMC -DFNFLOAT \
- -funsigned-char -DTPUTSARGTYPE=int -DUSE_STRERROR -DFREEBSD4 \
- -DNONOSETBUF -DUSE_UU_LOCK $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#FreeBSD 4.1, as above but without the NONOSETBUF hack and with CK_NEWTERM.
-#This works with ncurses 5.1.
-freebsd41:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.1 with ncurses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DFREEBSD41 -DUSE_UU_LOCK -DFNFLOAT \
- -funsigned-char -DTPUTSARGTYPE=int -DUSE_STRERROR $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#Default FreeBSD make for C-Kermit 8.0...
-freebsd:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- KTARGET=$${KTARGET-$(@)} freebsd45
-
-#FreeBSD 4.2, like 4.1.
-freebsd42:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.2...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DFREEBSD41 -DFREEBSD42 -DUSE_UU_LOCK -DFNFLOAT \
- -funsigned-char -DTPUTSARGTYPE=int -DUSE_STRERROR $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#FreeBSD 4.3, like 4.2.
-freebsd43:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.3...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DFREEBSD41 -DFREEBSD42 -DFREEBSD43 -DUSE_UU_LOCK \
- -DFNFLOAT -funsigned-char -DTPUTSARGTYPE=int -DUSE_STRERROR $(KFLAGS) \
- -O -pipe" "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#FreeBSD 4.4, like 4.3.
-freebsd44:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.4...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DFREEBSD41 -DFREEBSD42 -DFREEBSD43 -DFREEBSD44 \
- -DUSE_UU_LOCK -DFNFLOAT -funsigned-char -DTPUTSARGTYPE=int \
- -DUSE_STRERROR $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#FreeBSD 4.5, like 4.3 and 4.4.
-freebsd45:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.5...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DUSE_UU_LOCK -DFNFLOAT -funsigned-char -DTPUTSARGTYPE=int \
- -DFREEBSD41 -DFREEBSD42 -DFREEBSD43 -DFREEBSD44 -DFREEBSD45 \
- -DUSE_STRERROR $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#FreeBSD 4.6, like 4.5
-freebsd46:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.6...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DUSE_UU_LOCK -DFNFLOAT -funsigned-char -DTPUTSARGTYPE=int \
- -DFREEBSD41 -DFREEBSD42 -DFREEBSD43 -DFREEBSD44 -DFREEBSD45 \
- -DFREEBSD46 -DUSE_STRERROR $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#FreeBSD 4.7, like 4.6
-freebsd47:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.7...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DUSE_UU_LOCK -DFNFLOAT -funsigned-char -DTPUTSARGTYPE=int \
- -DFREEBSD41 -DFREEBSD42 -DFREEBSD43 -DFREEBSD44 -DFREEBSD45 \
- -DFREEBSD46 -DFREEBSD47 -DUSE_STRERROR $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#FreeBSD 4.8, like 4.7
-freebsd48:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.7...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DUSE_UU_LOCK -DFNFLOAT -funsigned-char -DTPUTSARGTYPE=int \
- -DFREEBSD41 -DFREEBSD42 -DFREEBSD43 -DFREEBSD44 -DFREEBSD45 \
- -DFREEBSD46 -DFREEBSD47 -DFREEBSD48 \
- -DUSE_STRERROR $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#FreeBSD 4.9
-freebsd49:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.7...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DUSE_UU_LOCK -DFNFLOAT -funsigned-char -DTPUTSARGTYPE=int \
- -DFREEBSD41 -DFREEBSD42 -DFREEBSD43 -DFREEBSD44 -DFREEBSD45 \
- -DFREEBSD46 -DFREEBSD47 -DFREEBSD48 -DFREEBSD49 \
- -DUSE_STRERROR $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#FreeBSD 5.0, like 4.6
-freebsd50:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 5.0 with ncurses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DUSE_UU_LOCK -DFNFLOAT -funsigned-char -DTPUTSARGTYPE=int \
- -DFREEBSD41 -DFREEBSD42 -DFREEBSD43 -DFREEBSD44 -DFREEBSD45 \
- -DFREEBSD46 -DFREEBSD50 -DUSE_STRERROR $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#FreeBSD 5.1
-freebsd51:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 5.0 with ncurses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DUSE_UU_LOCK -DFNFLOAT -funsigned-char -DTPUTSARGTYPE=int \
- -DFREEBSD41 -DFREEBSD42 -DFREEBSD43 -DFREEBSD44 -DFREEBSD45 \
- -DFREEBSD46 -DFREEBSD50 -DFREEBSD51 \
- -DUSE_STRERROR $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
-
-#Secure builds for FreeBSD... gcc required.
-
-freebsd44+srp+openssl:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.3 with SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 -DFREEBSD41 -DFREEBSD42 -DFREEBSD43 -DFREEBSD44 \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \
- -DCK_CURSES -DTCPSOCKET \
- $(SRPINC) $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(SSLLIB) \
- -lncurses -ltermcap -lsrp -lssl -lkrypto -lcrypto \
- -lcrypt "
-
-# The following fragmentary FreeBSD+SLL target was suggested, but it's not
-# clear which version of FreeBSD it applies to.
-#
-# ALL_TARGET= xermit
-# MAKE_ARGS= KTARGET=freebsd \
-# CFLAGS="${CFLAGS} -DBSD44 -DCK_NCURSES -DCK_NEWTERM \
-# -DTCPSOCKET -DNOCOTFMC -DFREEBSD4 -DUSE_UU_LOCK -DFNFLOAT \
-# -funsigned-char -DTPUTSARGTYPE=int -DUSE_STRERROR -DCKHTTP \
-# -DCK_SSL -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_DES" \
-# LIBS="-lssl -lcrypto -ldes -lncurses -lcrypt -lutil -lm"
-
-#FreeBSD 5.0 with OpenSSL 0.9.7.
-freebsd50+openssl:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 5.0, ncurses, openssl'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SSL $(SSLINC) -DZLIB \
- -DFREEBSD4 -DUSE_UU_LOCK -DFNFLOAT -funsigned-char -DTPUTSARGTYPE=int \
- -DFREEBSD41 -DFREEBSD42 -DFREEBSD43 -DFREEBSD44 -DFREEBSD45 \
- -DFREEBSD46 -DFREEBSD50 -DUSE_STRERROR $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lssl -lcrypto -lutil -lm $(SSLLIB) $(LIBS)"
-
-#NetBSD - all versions - with curses, not ncurses.
-#Some builds seem to need KFLAGS=-DTPUTSFNTYPE=int, others don't.
-#(Only to get rid of a warning -- the binaries are identical.)
-netbsd:
- @echo Making C-Kermit $(CKVER) for NetBSD with curses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DUSE_STRERROR -DTPUTSISVOID \
- -DCK_DTRCD -DCK_DTRCTS -DTPUTSARGTYPE=int -DFNFLOAT $(KFLAGS) -O" \
- "LIBS= -lcurses -lcrypt -lm $(LIBS)"
-
-#NetBSD 1.5.x in which the return type of the function pointer that is the
-#third argument of tputs() was changed from void to int... The regular NetBSD
-#target builds OK here but this one eliminates the (harmless) warning.
-netbsd15:
- @echo Making C-Kermit $(CKVER) for NetBSD with curses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DUSE_STRERROR -DNETBSD15 \
- -DCK_DTRCD -DCK_DTRCTS -DTPUTSARGTYPE=int -DFNFLOAT $(KFLAGS) -O" \
- "LIBS= -lcurses -lcrypt -lm $(LIBS)"
-
-#NetBSD 1.6 - like 1.5.x but with vanity banner saying 1.6.
-netbsd16:
- @echo Making C-Kermit $(CKVER) for NetBSD with curses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DUSE_STRERROR \
- -DNETBSD15 -DNETBSD16 \
- -DCK_DTRCD -DCK_DTRCTS -DTPUTSARGTYPE=int -DFNFLOAT $(KFLAGS) -O" \
- "LIBS= -lcurses -lcrypt -lm $(LIBS)"
-
-#NetBSD with ncurses requested explicitly rather than curses-which-is-ncurses
-netbsdn:
- @echo Making C-Kermit $(CKVER) for NetBSD with ncurses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -DCK_DTRCD \
- -DCK_DTRCTS -DFNFLOAT -DUSE_STRERROR -DTPUTSISVOID -DTPUTSARGTYPE=int \
- $(KFLAGS) -O" \
- "LIBS= -L/usr/pkg/lib -lncurses -lcrypt -lm $(LIBS)"
-
-#OpenBSD - All versions.
-#Uses ncurses as its curses so use -ltermlib, not -ltermcap
-#But it doesn't use uu_lock() which was introduced in OpenBSD 2.3.
-#For that use the next entry.
-#Add -DMAINTYPE=int if you get complaints about main: return type is not int.
-openbsdold:
- @echo Making C-Kermit $(CKVER) for OpenBSD...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \
- -DFNFLOAT -DNDSYSERRLIST $(KFLAGS) -O" "LIBS= -lcurses -ltermlib -lm"
-
-#OpenBSD 2.3 or later
-#Add -DMAINTYPE=int if you get complaints about main: return type is not int.
-#For C-Kermit 8.0 (Christian Weisgerber):
-# -ltermlib removed (presumably because -lcurses==ncurses already includes it)
-# -DUSE_UU_LOCK and -lutil added for uu_lock()
-# -DNDSYSERRLIST changed to -DUSE_STRERROR
-#If this gives you trouble use the previous entry.
-openbsd:
- @echo Making C-Kermit $(CKVER) for OpenBSD 2.3 or later...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \
- -DUSE_UU_LOCK -DFNFLOAT -DUSE_STRERROR $(KFLAGS) -O" \
- "LIBS= -lcurses -lutil -lm"
-
-#OpenBSD 3.0 or later includes OpenSSL
-#Add -DMAINTYPE=int if you get complaints about main: return type is not int.
-#For C-Kermit 8.0 (Christian Weisgerber):
-# -ltermlib removed (presumably because -lcurses==ncurses already includes it)
-# -DUSE_UU_LOCK and -lutil added for uu_lock()
-# -DNDSYSERRLIST changed to -DUSE_STRERROR
-#If this gives you trouble use the previous entry.
-openbsd30+ssl:
- @echo Making C-Kermit $(CKVER) for OpenBSD 3.0 or later...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \
- -DUSE_UU_LOCK -DFNFLOAT -DUSE_STRERROR -DCK_AUTHENTICATION \
- -DCK_SSL $(KFLAGS) -O" \
- "LIBS= -lcurses -lutil -lm -lssl -lcrypto"
-
-# make 386bsd 0.0new, posix
-# for 386bsd 0.1.24, change /usr/include/termios.h to #define NCCS if
-# _POSIX_SOURCE is #defined. (source: lewine, posix prgmrs guide, o`reilly)
-#NOTE: Lock directory is /var/spool/lock. Formerly, it was /var/spool/uucp,
-#but reportedly <wjones@halcyon.com> that was due to a typo in 'man tip'.
-386bsd:
- @echo 'Making C-Kermit $(CKVER) for jolix 386BSD 0.0new and 0.1.24...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DSETREUID -DPIDSTRING -DUSLEEP \
- -D_386BSD -DCK_CURSES -DTCPSOCKET \
- -DLOCK_DIR=\\\"/var/spool/lock\\\" \
- $(KFLAGS) -O" "LNKFLAGS = -s" "LIBS = -lcurses -ltermcap"
-
-#Mac OS X 1.0 (Rhapsody, Darwin) -- TCP/IP but no curses.
-macosx10:
- @echo Making C-Kermit $(CKVER) for `uname -s`...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DTCPSOCKET -DUSE_STRERROR -O $(KFLAGS)"
-
-#Mac OS X 1.0 (Rhapsody, Darwin) -- TCP/IP and curses.
-#Note: curses must be obtained separately. See next entry for ncurses.
-#Add "LIBS = -lcurses -ltermcap" if necessary (but reportedly it is not).
-macosx10c:
- @echo Making C-Kermit $(CKVER) for `uname -s` + curses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DCK_CURSES -DTPUTSFNTYPE=void -DTPUTSISVOID \
- -DTCPSOCKET -DUSE_STRERROR -O $(KFLAGS)"
-
-#Mac OS X 1.0 (Rhapsody, Darwin) -- TCP/IP and ncurses.
-#Note: ncurses must be obtained separately.
-#In the event of trouble with this one try the next one.
-macosx10nc:
- @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DCK_NCURSES -DTCPSOCKET -DUSE_STRERROR -O \
- $(KFLAGS)" "LIBS= -lncurses $(LIBS)"
-
-#Mac OS X 10.2 (Jaguar) ncurses.
-macosx102nc:
- @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DCK_NCURSES -DTCPSOCKET -DUSE_STRERROR -O \
- $(KFLAGS) " "LIBS= -lncurses $(LIBS)"
-
-#The problem here is that if curses.h also exists, it conflicts with
-#ncurses.h and and we have fatal errors. If this happens to you, then
-#try this entry.
-macosx10ncx:
- @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses...
- @rm -f ./curses.h; touch ./curses.h
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DCK_NCURSES -DTCPSOCKET -DUSE_STRERROR \
- -I. -O $(KFLAGS) " \
- "LIBS= -lncurses $(LIBS)"
- @rm -f ./curses.h
-
-#Mac OS X 10.3 (Panther) - Assumes ncurses is installed.
-macosx103:
- @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DMACOSX103 -DCK_NCURSES -DTCPSOCKET \
- -DUSE_STRERROR -DUSE_NAMESER_COMPAT -O \
- $(KFLAGS) " "LIBS= -lncurses -lresolv $(LIBS)"
-
-macosx103nc:
- $(MAKE) MAKE=$(MAKE) CC=$(CC) CC2=$(CC2) macosx103
-
-#Acorn RISCiX, based on ...
-#Berkeley Unix 4.2 or 4.3 with lock directory /usr/spool/uucp/LCK/LCK..ttyxx,
-#but without acucntrl program
-riscix:
- @echo Making C-Kermit $(CKVER) for RISCiX, /usr/spool/uucp/LCK..ttyxx
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD42 -DBSD4 -DRISCIX -DNOCSETS \
- -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DDIRENT -DCK_CURSES \
- -DMAXSP=9024 -DMAXRD=9024 -DSBSIZ=9050 -DRBSIZ=9050 \
- -DDFTTY=\\\"/dev/serial\\\" -DNOCSETS -DNOCYRIL \
- -DNOANSI -w -O2 -fomit-frame-pointer" \
- "LIBS= -lcurses -ltermcap " \
- "CC= /usr/ucb/cc" \
- "CC2= /usr/ucb/cc"
-
-#Acorn RISCiX, as above, but using gcc
-riscix-gcc:
- @echo Making C-Kermit $(CKVER) for RISCiX, /usr/spool/uucp/LCK..ttyxx
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD42 -DBSD4 -DRISCIX -DNOCSETS \
- -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DDIRENT -DCK_CURSES \
- -DMAXSP=9024 -DMAXRD=9024 -DSBSIZ=9050 -DRBSIZ=9050 \
- -DDFTTY=\\\"/dev/serial\\\" -DNOCSETS -DNOCYRIL \
- -DNOANSI -w -O2 -fomit-frame-pointer" \
- "LIBS= -lcurses -ltermcap " \
- "CC= gcc -mbsd" \
- "CC2= gcc -mbsd"
-
-#Convergent CTIX 6.4.1
-ctix:
- @echo 'Making C-Kermit $(CKVER) for Convergent CTIX 6.4.1'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DTCPSOCKET -DHDBUUCP -DCK_CURSES \
- -DNONAWS -DNOLEARN $(KFLAGS) -XO" \
- "LNKFLAGS=-s" "LIBS=-lsocket -lcurses -lc_s"
- mcs -d wermit
-
-# The following makefile entry should work for any Harris Night Hawk system
-# (either 88k or 68k based) running release 6.1 or later of the CX/UX
-# operating system. This is a POSIX and ANSI-C compliant system which also
-# supports BSD networking. (Earlier CX/UX releases will probably work with
-# sys5r3, but this has not been verified).
-#
-cx_ux:
- @echo Making C-Kermit $(CKVER) for Harris Night Hawk CX/UX 6.1 or later
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS=-DPOSIX -DTCPSOCKET -DHDBUUCP -DPID_T=pid_t -DWAIT_T=int \
- -Dd_ino=d_fileno -DUID_T=uid_t -DGID_T=gid_t $(KFLAGS) -Xa \
- -O3 -g" "LNKFLAGS=-O3"
-
-#Intergraph Clipper, CLIX, job control, HDB UUCP.
-clix:
- @echo 'Making C-Kermit $(CKVER) for Intergraph CLIX...'
- $(MAKE) wermit "CC=acc" "CC2=acc" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -w -DSVR3 -DCLIX -DDIRENT -DHDBUUCP -DNOSYSLOG -DUSE_MEMCPY \
- -DNOGETUSERSHELL -DNOREALPATH -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS=" "LIBS= -lbsd"
-
-#As above + TCP/IP...
-clixnet:
- @echo 'Making networked C-Kermit $(CKVER) for Intergraph CLIX...'
- $(MAKE) wermit "CC=acc" "CC2=acc" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -w -DSVR3 -DCLIX -DDIRENT -DHDBUUCP -DNOSYSLOG -DUSE_MEMCPY \
- -DTCPSOCKET -DNOGETUSERSHELL -DNOLEARN -DNOREALPATH $(KFLAGS) -O" \
- "LNKFLAGS=" "LIBS= -lbsd"
-
-#Mark Williams Coherent 286 or 386 on IBM PC family.
-#There is a 64K limit on program size, so this is a command-line only version.
-coherent:
- $(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DNOICP -DNOSETKEY -DNOLEARN \
- -DNOCSETS -DNOHELP -DNODIAL -DNOSCRIPT -DNODEBUG -DNOTLOG -DNOXMIT \
- -DNOMSEND -DNOFRILLS -DNOSYSIOCTLH -DSELECT_H $(KFLAGS) -VSUVAR" \
- -DNOFLOAT KTARGET=$${KTARGET:-$(@)} wermit
-
-#Mark Williams Coherent 386 on IBM PC family.
-#This will make a "minimum interactive" version - no scripts,
-#no character sets, no help, no dial, no debug/transaction logging, no
-#transmit, msend, mail, type, etc.
-coherentmi:
- $(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DNOSETKEY -DNOLEARN \
- -DNOSHOW -DNOCSETS -DNOHELP -DNODIAL -DNOSCRIPT -DNODEBUG -DNOTLOG \
- -DNOXMIT -DNOMSEND -DNOFRILLS -DNOSYSIOCTLH -DNOSERVER -DNOUUCP \
- -DNOSPL -DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ -DNOFLOAT \
- -DNOCMDL $(KFLAGS) -VSUVAR -DSELECT_H" KTARGET=$${KTARGET:-$(@)} \
- wermit
-
-#Mark Williams Coherent 386 on IBM PC/AT family.
-coherentmax:
- $(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DSELECT_H -DNOLEARN \
- -DNOFLOAT -DNOSYSIOCTLH $(KFLAGS) -VSUVAR" "LNKFLAGS = -O -s" \
- KTARGET=$${KTARGET:-$(@)} wermit
-
-#Mark Williams Coherent 386 4.2. Includes curses but not TCP/IP.
-#Requires updates to the 4.2.10 compiler; the regular compiler fails to
-#to handle "complex expressions". NOFLOAT is so it can work on old PCs
-#without floating-point hardware.
-coherent42:
- $(MAKE) "CFLAGS = -T500000 -DNOFLOAT -DCOHERENT -DNOANSI -DSELECT \
- -DNOSYSLOG -DDIRENT -DCK_CURSES -DCK_NEWTERM -DCK_WREFRESH -VSUVAR \
- -DDCLGETCWD -DNOSYSIOCTLH -DNOINITGROUPS -DNOSYMLINK -DSELECT_H \
- -DDCLGETCWD -O $(KFLAGS)" \
- "LNKFLAGS = -O -s" KTARGET=$${KTARGET:-$(@)} \
- "LIBS = -lsocket -lcurses" wermit
-
-#DEC Ultrix 2.x
-# Add -O, -DDYNAMIC, -s, etc, if they work.
-ultrix2x:
- @echo Making C-Kermit $(CKVER) for Ultrix 2.x ...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DDU2 -DNOGETUSERSHELL $(KFLAGS)"
-
-du2:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix2x
-
-#DEC Ultrix 3.0 and 3.1
-ultrix30:
- @echo Making C-Kermit $(CKVER) for Ultrix 3.0...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DDIRENT -DSIG_V -DNOGETUSERSHELL \
- -DULTRIX3 -DCK_CURSES $(KFLAGS) -O" "LIBS= -lcurses -ltermcap"
-
-du3:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix30
-
-ultrix3x:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix30
-
-#DEC Ultrix 4.0 or 4.1 on DECstation, VAXstation, VAX, etc.
-ultrix40:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.0 or 4.1...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DDU4 -DNOGETUSERSHELL \
- $(KFLAGS) -Olimit 1450" "LNKFLAGS = -s"
-
-#DEC Ultrix 4.2-4.5 on DECstation, DECsystem, VAXstation, VAX, etc.
-#Like ultrix40, except now C compiler supports -O2 optimization.
-ultrix42:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.2 or later...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL $(KFLAGS) \
- -O2 -Olimit 1750" "LNKFLAGS = -s"
-
-du42:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix42
-
-#DEC Ultrix 4.2-4.5 on DECstation, DECsystem, VAXstation, VAX, etc.
-#Like du42, but with curses support added and a couple features.
-ultrix42c:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.2 or later...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \
- -DCK_CURSES -DNOIKSD $(KFLAGS)-G6 -O2 -Olimit 3000 " \
- "LNKFLAGS = -s" "LIBS= -lcurses -ltermcap"
-
-ultrix43:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- "KFLAGS=-DULTRIX43 $(KFLAGS)" KTARGET=$${KTARGET-$(@)} ultrix42c
-
-ultrix43notcp:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- "KFLAGS=-DULTRIX43 -DNONET $(KFLAGS)" \
- KTARGET=$${KTARGET-$(@)} ultrix42c
-
-# NOTE: need -DNODEBUG on MIPS to avoid relocation errors at link time.
-# Actually now (8.0) that we have discovered the -G option maybe debugging
-# can be put back.
-ultrix44:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- "KFLAGS=-DULTRIX44 -G7 -DNODEBUG -DNETPTY -DNO_DEVTTY $(KFLAGS)" \
- KTARGET=$${KTARGET-$(@)} ultrix42c
-
-ultrix45:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- "KFLAGS=-DULTRIX45 $(KFLAGS)-DNETPTY -DNO_DEVTTY $(KFLAGS)" \
- KTARGET=$${KTARGET-$(@)} ultrix42c
-
-du42c:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- KTARGET=$${KTARGET-$(@)} ultrix42c
-
-#DEC Ultrix 4.3A or later on DECsystem and DECstation 5000/50, /150 or /260
-#with MIPS R4x00 processor. The "-mips3" switch generates R4000-specific
-#code, which is faster and more compact, but *won't* run on earlier
-#DECsystems and DECstations.
-ultrix43-mips3:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.3A or later, R4000 cpu...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \
- $(KFLAGS) -O2 -Olimit 1750 -mips3" "LNKFLAGS = -s -mips3"
-
-du43-mips3:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) ultrix43-mips3
-
-#DEC Ultrix 4.3A or later on MIPS R4x000 based systems.
-#Like ultrix43-mips3 but with curses support added
-ultrix43c-mips3:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.3A or later, R4000 cpu...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL -DCK_CURSES \
- $(KFLAGS) -O2 -Olimit 3000 -mips3" "LNKFLAGS = -s -mips3" \
- "LIBS= -lcurses -ltermcap"
-
-du43c-mips3:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- KTARGET=$${KTARGET-$(@)} ultrix43c-mips3
-
-#DEC Ultrix 4.4 on DECstation 5000/50 or /150 with R4000 MIPS processor,
-#or 5000/260 with R4400. The "-mips3" switch generates R4000-specific code,
-#which is faster and more compact but *won't* run on earlier DECstations.
-ultrix44-mips3:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.4, R4000 cpu ...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \
- $(KFLAGS) -O2 -Olimit 1450 -mips3" "LNKFLAGS = -s -mips3"
-
-du44-mips3:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- KTARGET=$${KTARGET-$(@)} ultrix44c-mips3
-
-#DEC Ultrix 4.2 on DECstation, VAXstation, VAX, etc, System V R4 environment
-ultrix42s5r4:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4 on Ultrix...'
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS = -O2 -Olimit 1500 -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s"
-
-#OSF/1
-osf:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
- -DCK_CURSES -DCK_RTSCTS -DFNFLOAT $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lbsd -lcurses -ltermcap -lm"
-
-#DEC OSF/1 V1.0-1.3 on DECstation, VAX, Alpha, or PC.
-dec-osf:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD4 -DOSF -DOSF13 -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
- -DNOREALPATH -DNOIKSD -DCK_CURSES -DCK_RTSCTS -DFNFLOAT -DNODEBUG \
- -DNOUNICODE $(KFLAGS)" \
- "LNKFLAGS = -non_shared" "LIBS = -lbsd -lcurses -ltermcap -lm"
-
-# This one causes "relocation out-of-range" errors in the linker.
-old-dec-osf:
- @echo Making C-Kermit $(CKVER) for DEC OSF/1 V1.x...
- @echo If you are building for DEC OSF/1 2.0, please use dec-osf20.
- @echo Remove or adjust -O2 and/or -Olimit if they cause trouble.
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -O2 -Olimit 2400 $(KFLAGS)"
-
-#DEC OSF/1 2.0 on Alpha and probably nowhere else.
-#The only difference from OSF/1 is that optimization is omitted.
-#The optimized version gets strange runtime errors, like the PAUSE command
-#not working. Add "-unsigned" to make all chars unsigned.
-dec-osf20:
- @echo Making C-Kermit $(CKVER) for DEC OSF/1 V2.0...
- @echo Optimization omitted because it causes runtime errors.
- @echo See comments in makefile.
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF20 $(KFLAGS)"
-
-dec-osf30:
- @echo Making C-Kermit $(CKVER) for DEC OSF/1 V3.0...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF30 -O2 -Olimit 2400 $(KFLAGS)"
-
-#Digital UNIX 3.2
-# Must compile ckuus[6x].c separately without optimization otherwise
-# the optimizer dumps core - keep CFLAGS here in sync with those from osf.
-du32:
- @echo Making C-Kermit $(CKVER) for Digital UNIX 3.2...
- $(MAKE) CC=$(CC) CC2=$(CC2) ckuus6.$(EXT) \
- "CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
- -DCK_CURSES -DCK_RTSCTS -DFNFLOAT -DOSF32 -DHDBUUCP $(KFLAGS)"
- $(MAKE) CC=$(CC) CC2=$(CC2) ckuusx.$(EXT) \
- "CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
- -DCK_CURSES -DCK_RTSCTS -DFNFLOAT -DOSF32 -DHDBUUCP $(KFLAGS)"
- $(MAKE) CC=$(CC) CC2=$(CC2) osf \
- "KFLAGS= -DOSF32 -DHDBUUCP -O2 -Olimit 3200 $(KFLAGS)"
-
-dec-osf32:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) du32 \
- KTARGET=$${KTARGET:-$(@)}
-
-#Digital UNIX 4.0 through 4.0D (use tru64 targets for 4.0E and above)...
-du40:
- @echo Making C-Kermit $(CKVER) for Digital UNIX 4.0...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DHDBUUCP -DFNFLOAT \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
-
-du40gcc:
- @echo Making C-Kermit $(CKVER) for Digital UNIX 4.0 with gcc ...
- $(MAKE) osf CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DHDBUUCP $(KFLAGS)"
-
-#Tru64 Unix 4.0E
-tru64-40e:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0E...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DOSF40E -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
-
-tru64-40f:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0F...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DOSF40F -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
-
-tru64-40g:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0G...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DOSF40G -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
-
-tru64-50a:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.0A...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DTRU64 -DOSF50 -DHDBUUCP \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)"
-
-tru64-51a:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.1A...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DTRU64 -DOSF50 -DOSF51A -DHDBUUCP \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)"
-
-tru64-51b:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.1A...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DTRU64 -DOSF50 -DOSF51A -DOSF51B -DHDBUUCP \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)"
-
-du50:
- $(MAKE) CC=$(CC) CC2=$(CC2) tru64-50a KTARGET=$${KTARGET:-$(@)}
-
-du40-ridiculous-checking:
- @echo Making C-Kermit $(CKVER) for Digital UNIX 4.0.
- @echo Checking everything - assumes DECC...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DHDBUUCP -w0 -warnprotos -check -portable \
- -unsigned -std1 -O3 -Olimit 1760 $(KFLAGS)"
-
-#Sequent DYNIX/ptx 1.2.1
-dynixptx12:
- @echo Making C-Kermit $(CKVER) for Sequent DYNIX/ptx 1.2.1...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DPTX -DNOGETUSERSHELL -DNOLEARN \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
-
-#Sequent DYNIX/ptx 1.3 or 1.4
-dynixptx13:
- @echo Making C-Kermit $(CKVER) for Sequent DYNIX/ptx 1.3 TCP/IP...
- $(MAKE) xermit "CFLAGS= -O KTARGET=$${KTARGET:-$(@)} \
- -DSVR3 -DDIRENT -DHDBUUCP -DPTX -DCK_POLL -DNOGETUSERSHELL \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DTCPSOCKET $(KFLAGS) -i" \
- "LNKFLAGS = -i" "LIBS = -lsocket -linet -lnsl"
-
-#Sequent DYNIX/ptx 2.0, ANSI C compilation
-#Should work on any hardware platform when DYNIX/ptx runs, including
-#386, 486, Pentium.
-dynixptx20:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET \
- -DWAIT_T=int -DPTX -DNOGETUSERSHELL $(KFLAGS) -O" \
- "LIBS = -lsocket -linet -lnsl"
-
-#Sequent DYNIX/ptx 2.0, ANSI C compilation, with curses
-dynixptx20c:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET -DWAIT_T=int -DPTX -DCK_CURSES \
- -DCK_NEWTERM -DNOGETUSERSHELL $(KFLAGS) -O" \
- "LIBS = -lsocket -linet -lnsl -lcurses -ltermcap"
-
-#Sequent DYNIX/ptx 2.1.6, 80486, ANSI C compilation, with curses:
-# -Xa -- use ANSI compiler.
-# -Wc,-pw -- suppress portability warnings.
-# -Wc,-i386 -- 80386 cpu.
-# -Wc,-i486 -- 80486 cpu.
-# -Wc,-P5 -- Pentium (default).
-# -Wc,-O3 -- highest optimization.
-# -Wa,-N17061 -- increase symbol table from default of 15013 for ckcuni.c.
-# Early versions of DYNIX/ptx 2.1.x may need -DCK_POLL instead of -DSELECT.
-# Add "$&" after the colon in the "xermit" target for parallel makes.
-dynixptx216c:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.1.6'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DHDBUUCP -DDYNAMIC -DTCPSOCKET \
- -DSELECT -DCK_REDIR -DCK_NAWS -DCK_WREFRESH -DSW_ACC_ID \
- -DTCP_NODELAY=1 -DTRMBUFL=2048 -DBIGBUFOK -DHADDRLIST \
- -DPTX -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL -DNOREALPATH \
- $(KFLAGS) -Xa -Wc,-pw -Wc,-i486 -Wc,-O3 -Wa,-N17061" \
- "LIBS = -lXbsd -lseq -lsocket -linet -lnsl -lmalloc -lm -lcurses" \
- "LNKFLAGS = -s"
-
-#Sequent DYNIX/ptx 2.1.6, gcc 2.7.2.2, with curses:
-dynixptx216cgcc:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.1.6 gcc'
- $(MAKE) xermit "CC = gcc" "CC2 = gcc" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DHDBUUCP -DDYNAMIC -DTCPSOCKET \
- -DSELECT -DCK_REDIR -DCK_NAWS -DCK_WREFRESH -DSW_ACC_ID \
- -DTCP_NODELAY=1 -DTRMBUFL=2048 -DBIGBUFOK -DHADDRLIST \
- -DPTX -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL -DNOREALPATH \
- $(KFLAGS) -O3 -pipe -funsigned-char" \
- "LIBS = -lXbsd -lseq -lsocket -linet -lnsl -lmalloc -lm -lcurses" \
- "LNKFLAGS = -s"
-
-#Sequent DYNIX/ptx 4.0, ANSI C compilation, with curses
-dynixptx41c:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 4.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET \
- -DWAIT_T=int -DPTX -DPTX4 -DCK_CURSES -DCK_NEWTERM \
- -DNOGETUSERSHELL $(KFLAGS) -O" \
- "LIBS = -lsocket -lnsl -lcurses -ltermcap"
-
-#Sequent DYNIX/ptx 4.4, ANSI C compilation, with curses
-dynixptx44:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 4.4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPTX -DPTX4 -DPOSIX -DHDBUUCP -DTCPSOCKET -DWAIT_T=int \
- -DCK_CURSES -DCK_NEWTERM -DBIGBUFOK -DSELECT -DNOGETUSERSHELL \
- $(KFLAGS) -O" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
-
-#Sequent DYNIX 3.0.x
-dynix3:
- @echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.0.x...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD43 -DACUCNTRL -DTCPSOCKET -O \
- -DPWUID_T=int -DGID_T=int $(KFLAGS)"
-
-#Sequent DYNIX 3.0.x, no ACUCNTRL
-dynix3noacu:
- @echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.0.x...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD43 -DLCKDIR -DTCPSOCKET -O \
- -DUID_T=int -DGID_T=int $(KFLAGS)"
-
-#Sequent DYNIX 3.1.x
-dynix31:
- @echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.1.x...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DDCLPOPEN -DLCKDIR -DBSD4 -DTCPSOCKET $(KFLAGS)"
-
-#Sequent DYNIX 3.1.2, as above but with curses, to be compiled by gcc 2.3.3.
-dynix31c:
- @echo 'Making C-Kermit $(CKVER) for Sequent DYNIX 3.1.2, curses...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O2 -DDCLPOPEN -DACUCNTRL \
- -DBSD43 -DTCPSOCKET -DCK_CURSES -DUID_T=int \
- $(KFLAGS)" "LIBS= -lcurses -ltermcap"
-
-#Convex C1 with Berkeley Unix
-convex:
- @echo Making C-Kermit $(CKVER) for Convex C1 / BSD...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD4 -DNOLEARN $(KFLAGS) -Dmsleep=mnap"
-
-#Convex C210 with Convex/OS 8
-convex8:
- @echo Making C-Kermit $(CKVER) for Convex C210 with OS 8
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DNODEBUG -DDIRENT -DNOFILEH \
- $(KFLAGS) -DSIG_V -Dmsleep=mnap"
-
-#Convex C2 with Convex OS 9.1 (should also work with 8.1 or later)
-#with ANSI C compiler, uses BSD 4.3 uucp lockfile convention.
-convex9:
- @echo Making C-Kermit $(CKVER) for Convex C210 with OS 9.1
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DCONVEX9 -DNOIEXTEN -DDIRENT -DNOFILEH -DTCPSOCKET \
- -D__STDC__ -DLCKDIR -Dmsleep=mnap -O -ext -tm c1 $(KFLAGS)" \
- "LNKFLAGS = -ext"
-
-#Convex C2 with Convex OS 10.1 or later
-#with gcc 2.x C compiler
-convex10gcc:
- @echo Making C-Kermit $(CKVER) for Convex C2 with OS 10.1 using gcc
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DCONVEX9 -DNOIEXTEN -DDIRENT -DNOFILEH -DTCPSOCKET \
- -D__STDC__ -Dmsleep=mnap -O2 $(KFLAGS)" CC=gcc CC2=gcc
-
-#Cray X-MP or Y-MP UNICOS 6.x or 7.x.
-#NOTE: NPROC tells how many parallel makes to run. If your Cray has multiple
-#processors, you can set NPROC up to the number of CPUs, e.g. NPROC=16.
-cray:
- @echo 'Making C-Kermit $(CKVER) for Cray X/Y-MP UNICOS 6.x or 7.0...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS) -O1"
-
-#Cray X-MP or Y-MP UNICOS 8.0 Alpha.
-cray8:
- @echo 'Making C-Kermit $(CKVER) for Cray X/Y-MP UNICOS 8.0 Alpha...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \
- "CFLAGS= -DSVR4 -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS) -O1"
-
-#Cray X-MP or Y-MP UNICOS 9.0.
-#This one was executed successfully for C-Kermit 8.0.209.
-#Earlier versions of Unicos will probably need the same flags.
-cray9:
- @echo 'Making C-Kermit $(CKVER) for Cray X/Y-MP UNICOS 9.0...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \
- "CFLAGS= -DSVR4 -DDIRENT -DHDBUUCP -DNOLFDEVNO \
- -DTCPSOCKET $(KFLAGS) -O1"
-
-#Cray-2 or Cray 3-CSOS
-#NOTE: NPROC tells how many parallel makes to run. If your Cray has multiple
-#processors, you can set NPROC up to the number of CPUs, e.g. NPROC=16.
-craycsos:
- @echo 'Making C-Kermit $(CKVER) for Cray-2/3 CSOS
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET \
- $(KFLAGS) -DCK_ANSIC -DCK_CURSES" "LIBS=-lnet"
-
-#NeXTSTEP 1.0 through 3.2.
-#Includes fullscreen file transfer display (curses) and TCP/IP support.
-#Uses shared library to make executable program about 80K smaller.
-#Remove "LIBS = -lsys_s" if this causes trouble.
-next:
- @echo Making C-Kermit $(CKVER) for NeXTSTEP...
- @echo 'If you get errors in ckutio.c about w_S, w_T, etc,'
- @echo 'add KFGLAGS=-DNOREDIRECT to your make command.'
- $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
- -pipe -DCK_CURSES $(KFLAGS) -O -w" "LIBS = -lsys_s -lcurses -ltermcap"
-
-nextc:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \
- KTARGET=$${KTARGET:-$(@)}
-
-nextg:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \
- KFLAGS=-Wall KTARGET=$${KTARGET:-$(@)}
-
-nextgc:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \
- KFLAGS=-Wall KTARGET=$${KTARGET:-$(@)}
-
-#NeXTSTEP 3.3.
-#Includes fullscreen file transfer display and TCP/IP.
-next33:
- @echo Making C-Kermit $(CKVER) for NeXTSTEP 3.3...
- $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
- -pipe -DCK_CURSES $(KFLAGS) -O -w" "LIBS = -lsys_s -lcurses -ltermcap"
-
-#OPENSTEP 4.2 for Sparc, m680x0, HP PA-RISC, and Intel.
-#Includes fullscreen file transfer display and TCP/IP.
-#ckcpro.c compiled without optimization because it crashes the compiler.
-openstep42:
- @echo Making C-Kermit $(CKVER) for OPENSTEP 4.2...
- $(MAKE) ckcpro.$(EXT) \
- "CFLAGS= -DOPENSTEP42 -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV \
- -DFNFLOAT -pipe -DCK_CURSES $(KFLAGS) -w"
- $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DOPENSTEP42 -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV \
- -DFNFLOAT -pipe -DCK_CURSES $(KFLAGS) -O -w" \
- "LIBS = -lsys_s -lcurses -ltermcap"
-
-#NeXT with malloc debugger
-nextmd:
- @echo Making C-Kermit $(CKVER) for NeXT with malloc debugging...
- $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
- -DCK_CURSES $(KFLAGS) -O -w -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG" \
- "LIBS = -lsys_s -lcurses -ltermcap"
-
-#Build for NeXTSTEP with "fat" binaries (MABs) that run on both Motorola
-#and Intel platforms.
-nextfat:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- next KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-Wall -arch m68k -arch i386" "LNKFLAGS = -arch m68k -arch i386"
-
-#NeXTSTEP on Intel Platforms.
-next486:
- @echo Making C-Kermit $(CKVER) for NeXTSTEP on Intel Platforms...
- @echo 'If you get errors in ckutio.c about w_S, w_T, etc,'
- @echo 'add KFGLAGS=D-DNOREDIRECT to your make command.'
- $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
- -DNODEBUG -O3 -fno-omit-frame-pointer -fschedule-insns2 -pipe \
- -DCK_CURSES $(KFLAGS) -w" "LIBS = -lsys_s -lcurses -ltermcap"
-
-#Single binary that runs on NeXT 68030 and 68040, Intel, HP, and Sparc,
-#as well as on OpenStep/Mach.
-nextquadfat:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-Wall -arch m68k -arch i386 -arch hppa -arch sparc" \
- "LNKFLAGS = -arch m68k -arch i386 -arch hppa -arch sparc"
-
-#BeBox
-beboxdr7:
- @echo 'Making C-Kermit $(CKVER) for the BeBox...'
- @echo 'Link step will fail with default Metroworks linker 64K limit.'
- @echo 'Code Warrior Gold required to link big programs.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CC=/boot/develop/tools/mwcc" "CC2=/boot/develop/tools/mwld" \
- "CFLAGS= -DBEBOX -DBE_DR_7 -DPOSIX -DNOUUCP -DNOLEARN $(KFLAGS) -O"
-
-#BeBox BeOS DR7 only
-bebox:
- @echo 'Making C-Kermit $(CKVER) for BeBox...'
- @echo 'Link step will fail with default Metroworks linker 64K limit.'
- @echo 'Code Warrior Pro 3.0 for BeBox required to link big programs.'
- $(MAKE) wermit "CC=mwcc" "CC2=mwld" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBEBOX -DPOSIX -DNOLEARN -DNOUUCP $(KFLAGS) -O"
-
-#BeOS 4.5
-#We have to use the wermit target because 'fd_set' is unknown.
-beos45:
- $(MAKE) wermit "CC=$(CC)" "CC2=$(CC2)" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBEOS -DBEOS45 -DPOSIX -DNOIKSD -DNOREALPATH -DSYSTIMEH \
- -DNOCOTFMC -DNOUUCP -DNOLEARN $(KFLAGS) -O" \
- "LIBS = $(LIBS)"
-
-#BeOS 4.5
-beos45net:
- $(MAKE) CC=$(CC) CC2=$(CC2) beos45 \
- "KFLAGS=-DTCPSOCKET -DNO_DNS_SRV $(KFLAGS)" "LIBS=-lnet -lnetapi"
-
-#Plan 9 from Bell Labs
-plan9:
- @echo 'C-Kermit for Plan 9 from Bell Labs - calling ckpker.mk...'
- make -f ckpker.mk
-
-#POSIX
-posix:
- @echo 'Making C-Kermit $(CKVER) for pure POSIX...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DNOUUCP -DNOLEARN $(KFLAGS) -O"
-
-# PowerMAX OS (SVR4) from Concurrent (tested on PowerMAX 5.1)
-powermax:
- @echo 'Making C-Kermit $(CKVER) for Concurrent PowerMAX OS...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DPOWERMAX \
- -DNETPTY -DHAVE_STREAMS -DHAVE_GRANTPT -DHAVE_PTSNAME -DPUSH_PTEM \
- -DPUSH_LDTERM -DPUSH_TTCOMPAT \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lresolv -lcurses -lgen -lc -lucbc"
-
-#Berkeley Software Design Inc. BSDI
-# Substitute "LIBS= -lnewcurses -ltermcap" if desired.
-bsdi:
- @echo 'Making C-Kermit $(CKVER) for BSDI ...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DSETREUID -DSW_ACC_ID -DBIGBUFOK -DFIXCRTSCTS \
- -DTCPSOCKET -DCK_CURSES -DFNFLOAT $(KFLAGS) -O" \
- "LIBS= -lcurses -ltermcap -lm"
-
-#Berkeley Software Design Inc. BSDI - has higher serial speeds than 1.x.
-bsdi2:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DBSDI2 $(KFLAGS)"
-
-bsdi3:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DBSDI2 -DBSDI3 $(KFLAGS)"
-
-bsdi4:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DBSDI2 -DBSDI3 -DBSDI4 -DTPUTSFNTYPE=void -DTPUTSISVOID \
- -m486 $(KFLAGS)"
-
-# (old name for the above)
-bsdiposix:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi
-
-
-#Build a BSDI 4.x binary that also runs under FreeBSD (Terry Kennedy).
-#But watch out for details like serial-port locking.
-bsdix:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DBSDI2 -DBSDI3 -DBSDI4 -DTPUTSFNTYPE=void -DTPUTSISVOID \
- -m486 $(KFLAGS)" "LNKFLAGS=-static -Wl,-m,i386bsdi -Wl,-e,_start"
-
-#Pyramid 9XXX (e.g. 9845) or MIServer T series, OSx 4.4b thru 5.1
-pyramid:
- @echo Making C-Kermit $(CKVER) for Pyramid Dual Port OSx
- ucb $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD43 -DTCPSOCKET -DPYRAMID -O $(KFLAGS)" "LNKFLAGS = -s"
-
-#Pyramid Dual Port OSx using HoneyDanBer UUCP, curses and TCP
-pyramid-hdb:
- @echo Making C-Kermit $(CKVER) for Pyramid Dual Port OSx
- ucb $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD43 -DTCPSOCKET -DHBDUUCP -DCK_CURSES -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lcurses -ltermcap"
-
-#Pyramid DC/OSx (UNIX System V R4).
-#Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
-#are not misplaced in sys (rather than netinet and arpa, respectively).
-#Uses ANSI C.
-#NOTE: Remove -O and Olimit:2500 from CFLAGS if TELNET connections do not work.
-pyrdcosx:
- @echo 'Making C-Kermit $(CKVER) for Pyramid DC/OSx...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -Xa -O -DSVR4 -DDIRENT -DHDBUUCP -DSELECT -DNOGETUSERSHELL \
- -DCK_CURSES -DSTERMIOX -DTCPSOCKET -DPYRAMID -K Olimit:3100 \
- -DNO_DNS_SRV $(KFLAGS)" "LIBS= -lcurses -lsocket -lnsl" "LNKFLAGS = -s"
-
-#IBM's AIX 3.0 on IBM 370 mainframe, tested on AIX F44 thru F50.
-aix370:
- @echo Making C-Kermit $(CKVER) for IBM System/370 AIX 3.0...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIX370 -DTCPSOCKET -DLCKDIR -DDIRENT $(KFLAGS)" \
- "LIBS = -lbsd"
-
-#IBM's AIX/ESA 2.1 (OSF/1) on IBM mainframe
-aixesa:
- @echo Making C-Kermit $(CKVER) for IBM AIX/ESA...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXESA -DTCPSOCKET $(KFLAGS) -O"
-
-#IBM PS/2 with AIX 1.0 thru 1.3.
-# Reports indicate that -O switch must be omitted.
-# It is also possible that "make bsd" will work (reports welcome).
-# One report said "make LIBS=-lbsd bsd" did the trick.
-# NOTLOG is to get around a 'tlog' symbol defined in one of the headers.
-ps2aix:
- @echo 'Making C-Kermit $(CKVER) for IBM AIX 1.x PS/2...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOREALPATH -DPS2AIX10 -DSIG_V \
- -DNOUNICODE -DNOTLOG -DNOLEARN $(KFLAGS) -i" \
- "LNKFLAGS = -i"
-
-ps2aixnetc:
- @echo 'Making C-Kermit $(CKVER) for IBM AIX 1.x PS/2...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOREALPATH -DPS2AIX10 -DTCPSOCKET -DCK_CURSES \
- -DSIG_V -DNOUNICODE -DNOTLOG -DNOLEARN $(KFLAGS) -i" \
- "LIBS = -lcurses" "LNKFLAGS = -i"
-
-ps2aix3:
- $(MAKE) ps2aix KTARGET=$${KTARGET:-$(@)}
-
-#IBM RT PC with AIX 2.2.1, valid as of C-Kermit 8.0.
-#NOTLOG because of a conflict in <sys/termio.h>.
-#This one has unique and strange lockfiles.
-# -O removed on purpose (8.0).
-# In case of "compiler error: symbol table full", increase the -Nn number.
-# In case of "compiler error: Constant pool too big", boost the -Np number.
-# Add -DNOPUTENV if putenv() causes trouble.
-# Put -DNOIKSD back if IKSD-related problems occur.
-rtaix:
- @echo 'Making C-Kermit $(CKVER) for IBM RT PC, AIX 2.2.1...'
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS = -DATTSV -DRTAIX -DHDBUUCP -DDIRENT -DNOTLOG -DTCPSOCKET \
- -DNOGETUSERSHELL -DCLSOPN -DNOREALPATH -DNOUNICODE -DBSD_INCLUDES \
- -DUSE_LSTAT -DFNFLOAT -Nn2500 -Np1000 -Wq,-SJ2 -a -w $(KFLAGS)" \
- "LIBS = -lm $(LIBS)" "LNKFLAGS = -s"
-
-#IBM RT PC with AIX 2.2.1 + curses
-rtaixc:
- $(MAKE) rtaix CC=$(CC) CC2=$(CC2) "KFLAGS=-DCK_CURSES" "LIBS=-lcurses"
-
-#IBM RT PC with AIX (ACIS) 2.2.1 (BSD 4.3)
-# Add -O, -DDYNAMIC, -s, etc, if they work.
-rtacis:
- @echo Making C-Kermit $(CKVER) for RT PC with ACIS 2.2.1 = BSD 4.3...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DNOREALPATH -DNOIKSD -DNOPUTENV \
- $(KFLAGS) -U__STDC__" "LNKFLAGS = -s"
-
-#IBM AIX 3.0, 3.1, or 3.2 for RISC System/6000.
-rs6000:
- @echo Making C-Kermit $(CKVER) for IBM AIX 3.0 or 3.1, RS/6000...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR3 -DDIRENT -DCK_ANSIC \
- -DCK_POLL -DCLSOPN -DSELECT_H -DNOTTYLOCK -O $(KFLAGS)" \
- "LNKFLAGS = -s"
-
-#IBM AIX 3.0, 3.1, or 3.2 for RISC System/6000, with curses.
-rs6000c:
- @echo Making C-Kermit $(CKVER) for IBM AIX 3.0 or 3.1, RS/6000...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR3 -DDIRENT -DCK_ANSIC \
- -DCK_POLL -DCLSOPN -DCK_CURSES -DSELECT_H -DNOTTYLOCK -DNOREALPATH \
- -O $(KFLAGS)" "LIBS= -lcurses -ltermcap" "LNKFLAGS = -s"
-
-aix30:
- $(MAKE) rs6000 CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)}
-
-aix31:
- $(MAKE) rs6000 CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)}
-
-#IBM AIX 3.2 for RISC System/6000.
-#In case of "subprogram too complex" warnings, add "-qmaxmem=16000" to CFLAGS.
-rs6aix32:
- @echo Making C-Kermit $(CKVER) for IBM AIX 3.2, RS/6000...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR4 -DDIRENT -DCK_ANSIC -DNOREALPATH \
- -DSELECT_H -DCLSOPN -DNOTTYLOCK -O $(KFLAGS)" "LNKFLAGS = -s"
-
-#IBM AIX 3.2 for RISC System/6000.
-rs6aix32c:
- @echo Making C-Kermit $(CKVER) for IBM AIX 3.2, RS/6000, TCP+curses...
- @echo In case of Subprogram Too Complex warnings,
- @echo add -qmaxmem=16000 to CFLAGS.
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR4 -DDIRENT -DCK_ANSIC -DNOREALPATH \
- -DCLSOPN -DCK_CURSES -DSELECT_H -DNOTTYLOCK -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS=-lcurses"
-
-aix32:
- $(MAKE) rs6aix32c KTARGET=$${KTARGET:-$(@)}
-
-#IBM AIX 4.1, 4.1.x on RISC System/6000 or Power Series.
-#Generates common binary for all platforms if using xlc (IBM C compiler).
-#When using gcc, add -mcpu=common to generate common binary.
-#Note that this one needs CK_NEWTERM.
-# Add -bbigtoc in case ld fails with TOC overflow.
-aix41:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
- -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -qmaxmem=16000 -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS=-lcurses"
-
-#Ditto but with gcc.
-#Remove "CC=gcc CC2=gcc" if you have gcc installed as cc.
-aix41g:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC=gcc" "CC2=gcc" \
- "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
- -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -O $(KFLAGS)" \
- "LNKFLAGS = -s -Xlinker -bbigtoc" "LIBS=-lcurses"
-
-# Add -bbigtoc in case ld fails with TOC overflow.
-aix41+krb5+krb4:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
- -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_DES $(K5INC) $(K5INC)/krb5 \
- -DNOGETUSERSHELL -qmaxmem=16000 -O $(KFLAGS)" \
- "LNKFLAGS = -s" \
- "LIBS = $(K5LIB) -lcurses -lkrb4 -ldes425 -lkrb5 \
- -lcom_err -lk5crypto -lgssapi_krb5"
-
-#Old name for "aix41".
-rs6aix41c:
- $(MAKE) aix41 KTARGET=$${KTARGET:-$(@)}
-
-#IBM AIX 4.1, 4.1.x, or 4.2 on RISC System/6000 or Power Series,
-# with X.25 support
-#Generates common binary for all platforms if using xlc (IBM C compiler).
-#When using gcc, add -mcpu=common to generate common binary.
-# Add -bbigtoc in case ld fails with TOC overflow.
-aix41x25:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
- -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DIBMX25 -DDEBUG -DNOGETUSERSHELL -qmaxmem=16000 -g $(KFLAGS)" \
- "LNKFLAGS = -g -bI:/lib/pse.exp" "LIBS=-lcurses -lodm -lcfg"
- -@echo "\e]0;kermit done\a\c"
-
-#As above but without -g in LNKFLAGS.
-# Add -bbigtoc in case ld fails with TOC overflow.
-aix41x25o:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
- -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DIBMX25 -DNODEBUG -DNOGETUSERSHELL -qmaxmem=16000 $(KFLAGS)" \
- "LNKFLAGS = -bI:/lib/pse.exp" "LIBS=-lcurses -lodm -lcfg"
- -@echo "\e]0;kermit done\a\c"
-
-#AIX 4.2 -- Must have CK_NEWTERM or echoing is lost after curses.
-# Add -bbigtoc in case ld fails with TOC overflow.
-aix42:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.2 or higher...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DAIX42 -DSVR4 -DSTERMIOX -DTCPSOCKET \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DFNFLOAT \
- -DSELECT -DSELECT_H -DNOGETUSERSHELL -qmaxmem=16000 -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS=-lcurses -lm"
-
-#AIX 4.3 -- Must NOT have CK_NEWTERM or else C-Kermit hangs after curses.
-# -bbigtoc needed on some systems but not others to avoid TOC overflow.
-# "man ld" says -bbigtoc makes program run slower.
-aix43:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DAIX43 -DSVR4 -DSTERMIOX -DTCPSOCKET \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DFNFLOAT -DNOGETUSERSHELL -qmaxmem=16000 -bbigtoc -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS=-lcurses -lm"
-
-#AIX 4.3 with IBM X.25.
-aix43x25:
- @echo "Making C-Kermit $(CKVER) for IBM AIX 4.3 with X.25..."
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DAIX43 -DSVR4 -DSTERMIOX -DTCPSOCKET \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DFNFLOAT -DNOGETUSERSHELL -DIBMX25 \
- -qmaxmem=16000 -bbigtoc -O $(KFLAGS)" \
- "LNKFLAGS = -bI:/lib/pse.exp" "LIBS=-lcurses -lodm -lcfg -lm"
-
-#AIX 4.3 -- Must NOT have CK_NEWTERM or else C-Kermit hangs after curses.
-# -mminimal-toc needed on some systems but not others to avoid TOC overflow.
-# "man ld" says -bbigtoc makes program run slower.
-aix43g:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS=-lcurses -lm"
-
-aix43gcc:
- $(MAKE) aix43g
-
-# None of the following aix43gcc attempts work on a gcc-only AIX 4.3.3 box.
-# It just plain can't find the math routines (fmod, pow, exp, sqrt, log10,...)
-# Which is odd because nm /usr/lib/libC.a finds them...
-
-#in case aix43gcc can't find its math library...
-aix43gccx:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS= -L/usr/local/lib/gcc-lib/powerpc-ibm-aix4.3.1.0/2.95.2 \
- -lcurses -bloadmap -bnoquiet"
-
-#in case aix43gccx can't find its math library...
-aix43gccy:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS= -lcurses -bloadmap -bnoquiet"
-
-#in case aix43gccx can't find its math library...
-aix43gccz:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS= -L. -lcurses -bloadmap -bnoquiet"
-
-
-#AIX 4.3 with MIT Kerberos 5 and Kerberos 4 compatibility mode
-# Must NOT have CK_NEWTERM or else C-Kermit hangs after curses.
-# -mminimal-toc needed on some systems but not others to avoid TOC overflow.
-# "man ld" says -bbigtoc makes program run slower.
-aix43gcc+krb5+krb4:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher w/Kerberos...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_DES -funsigned-char $(K5INC) $(K5INC)/krb5 \
- $(KFLAGS)" \
- "LIBS=$(K5LIB) -lcurses -lm -lkrb4 -ldes425 -lkrb5 \
- -lcom_err -lk5crypto -lcrypt -lgssapi_krb5"
-
-#AIX 4.3 with MIT Kerberos 5, Kerberos 4 compatibility mode and OpenSSL
-# Must NOT have CK_NEWTERM or else C-Kermit hangs after curses.
-# -mminimal-toc needed on some systems but not others to avoid TOC overflow.
-# "man ld" says -bbigtoc makes program run slower.
-aix43gcc+krb5+krb4+openssl:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher w/Kerberos...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_DES -DCK_CAST -DLIBDES -DCK_SSL \
- -funsigned-char $(K5INC) $(K5INC)/krb5 $(SSLINC) $(KFLAGS)" \
- "LIBS=$(K5LIB) $(SSLLIB) -lssl -lcrypto \
- -lcurses -lm -lkrb4 -ldes425 -lkrb5 -lcom_err -lk5crypto -lcrypt \
- -lgssapi_krb5"
-
-aix43gcc+openssl:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher w/OpenSSL...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL \
- -DCK_AUTHENTICATION -DCK_SSL -funsigned-char $(SSLINC) $(KFLAGS)" \
- "LIBS=$(SSLLIB) -lssl -lcrypto -lcurses -lm -lcrypt"
-
-aix44:
- $(MAKE) aix42 "KFLAGS=-DAIX44 -qmaxmem=20000 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-aix45:
- $(MAKE) aix42 "KFLAGS=-DAIX45 -qmaxmem=20000 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-aix50:
- $(MAKE) aix42 "KFLAGS=-DAIX50 -qmaxmem=20000 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-aix51:
- $(MAKE) aix42 "KFLAGS=-DAIX51 -qmaxmem=20000 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-aix52:
- $(MAKE) aix42 "KFLAGS=-DAIX52 -qmaxmem=20000 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-aix53:
- $(MAKE) aix42 "KFLAGS=-DAIX53 -qmaxmem=20000 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-aix44gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX44 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-aix45gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX45 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-aix50gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX50 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-aix51gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX51 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-aix52gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX52 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-aix53gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX53 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
-
-#Bull DPX/2 with BOS/X, like AIX/RS6000
-bulldpx2:
- @echo Making C-Kermit $(CKVER) for Bull DPX/2 with BOS/X...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DCK_ANSIC -DCKTYP_H=<sys/types.h> \
- -DCK_POLL -DNOGETUSERSHELL -DCLSOPN -DNOLEARN -O $(KFLAGS)" \
- "LNKFLAGS = -s"
-
-#Sun UNIX 3.5 with gcc 2.3.3.
-sunos3gcc:
- @echo Making C-Kermit $(CKVER) for Sun UNIX 3.5 and gcc...
- $(MAKE) xermit CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \
- CFLAGS="-g -O -DBSD4 -DTCPSOCKET $(KFLAGS)"
-
-#SunOS version 4.0, BSD environment, has saved original euid feature.
-# Add "CC=/usr/ucb/cc CC2=/usr/ucb/cc" if necessary.
-# Note: Including Unicode crashes the assembler in ckcuni.c.
-sunos4:
- @echo Making C-Kermit $(CKVER) for SunOS 4.0, BSD environment...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS4 -DFNFLOAT -DNOUNICODE $(KFLAGS)" \
- "LIBS=-lm"
-
-#As above, but with SunLink X.25 support
-sunos4x25:
- @echo SunLink X.25 support
- $(MAKE) "MAKE=$(MAKE)" sunos4 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DFNFLOAT -DSUNX25" \
- "LIBS=-lm"
-
-#SUN OS version 4.1 - 4.1.3, BSD environment, has saved original euid feature.
-#Uses Honey DanBer UUCP. Requires presence of /usr/spool/locks directory.
-# /var/spool/ should be a symbolic link to /usr/spool/.
-# ... or 'make xermit "CC= /usr/ucb/cc " \'
-# Note: "xermit" means use the select() version of the CONNECT module.
-sunos41:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 / BSD...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE $(KFLAGS)" \
- "LIBS= $(LIBS) -lresolv -lm"
-
-#As above, but compiled with gcc. Gives 24-32K size reduction
-#with gcc 2.1 or 2.2.2. CAUTION: make sure "fixincludes" has been run on
-#the include files, so gcc's are in sync with the regular Sun ones!
-#This includes the curses library for fullscreen file transfer display.
-#NDGPWNAM needed for GCC 2.5.6, not needed for 2.4.0, but it's uncertain
-#whether it will do any harm for 2.4.0 compilation -- if so, remove it.
-sunos41gcc:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -funsigned-char $(KFLAGS)" "LIBS= -lcurses -ltermcap -lresolv -lm"
-
-# As above, but without -funsigned-char so I can see the warnings that
-# everybody else will get when they use ANSI compilers that don't have this
-# option (gsc = gcc signed char).
-sunos41gsc:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- $(KFLAGS)" "LIBS= -lcurses -ltermcap -lresolv -lm"
-
-#As above but with ckucon.c rather than ckucns.c (for testing only)
-sunos41gccfork:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DNOLEARN -funsigned-char $(KFLAGS)" \
- "LIBS= -lcurses -ltermcap -lresolv -lm"
-
-#as above but configured for Kerberos IV
-sunos41gcc+krb4:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, krb4...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DTCPSOCKET -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 \
- -DCK_ENCRYPTION -DCK_DES -DCK_CAST -DBIGBUFOK -funsigned-char \
- $(K4INC) $(KFLAGS)" \
- "LIBS= $(K4LIB) -lcurses -ltermcap -lresolv -lm -lkrb -ldes"
-
-#as above but configured for SSL/TLS
-sunos41gcc+openssl:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, ssl...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DCK_AUTHENTICATION -funsigned-char \
- -DCK_SSL -DTCPSOCKET -DBIGBUFOK $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -lcurses -ltermcap -lresolv -lm -lssl -lcrypto"
-
-#as above but configured for Kerberos IV and SSL/TLS
-sunos41gcc+krb4+openssl:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, krb4...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION -DCK_DES \
- -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \
- $(K4INC) $(SSLINC) $(KFLAGS)" \
- "LIBS= $(K4LIB) $(SSLLIB) \
- -lcurses -ltermcap -lresolv -lm -lkrb -lssl -lcrypto"
-
-#as above but configured for Kerberos IV and ZLIB enabled SSL/TLS
-sunos41gcc+krb4+openssl+zlib:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, krb4...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION -DCK_DES \
- -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \
- -DZLIB $(K4INC) $(SSLINC) \
- $(KFLAGS)" \
- "LIBS= $(K4LIB) $(SSLLIB) \
- -lcurses -ltermcap -lresolv -lm -lkrb -lssl -lcrypto -lz"
-
-#as above but configured for Kerberos IV and SRP and ZLIB enabled SSL/TLS
-sunos41gcc+krb4+srp+openssl+zlib:
- @echo "C-Kermit $(CKVER) SunOS 4.1: gcc,curses,krb4,srp,ssl,zlib..."
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION -DCK_DES \
- -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \
- -DZLIB -DCK_SRP $(K4INC) $(SRPINC) $(SSLINC) $(KFLAGS)" \
- "LIBS= $(K4LIB) $(SRPLIB) $(SSLLIB) \
- -lcurses -ltermcap -lresolv -lm -lkrb -lkrypto \
- -lsrp -lssl -lcrypto -lz"
-
-#as above but configured for Kerberos IV and SRP and ZLIB enabled SSL/TLS
-sunos41gcc+srp+openssl+zlib:
- @echo "C-Kermit $(CKVER) SunOS 4.1: gcc,curses,srp,ssl,zlib..."
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_DES \
- -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \
- -DZLIB -DCK_SRP $(SRPINC) $(SSLINC) \
- $(KFLAGS)" \
- "LIBS= $(SRPLIB) $(SSLLIB) \
- -lcurses -ltermcap -lresolv -lm -lkrypto -lsrp -lssl -lcrypto -lz "
-
-#SUNOS 4.1 as sunos41 above, but also with curses support
-sunos41c:
- @echo Curses support
- $(MAKE) "MAKE=$(MAKE)" sunos41 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DCK_CURSES -DFNFLOAT " \
- "LIBS= -lcurses -ltermcap"
-
-#As SunOS 4.1.x, gcc, configured as Internet Kermit Server.
-# . NOLOCAL removes capability to make connections
-# . TNCODE allows server-side Telnet negotiation.
-# . used to include -lpwent, why?
-# . used to include -L/usr/local/lib -lm, why?
-sunos41giks:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc for IKS...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DNDGPWNAM -DFNFLOAT \
- -DNOLOCAL -DTCPSOCKET -DTNCODE -DNOPUSH $(KFLAGS)" \
- "LIBS= -lm -lresolv"
-
-#SUNOS 4.1 with SunLink X.25 support
-sunos41x25:
- @echo SunLink X.25 support
- $(MAKE) "MAKE=$(MAKE)" wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE -DFNFLOAT -DSUNX25 \
- -DNOLEARN $(KFLAGS)" "LIBS= $(LIBS) -lresolv -lm"
-
-#SUNOS 4.1 with SunLink X.25 support and curses
-sunos41x25c:
- @echo SunLink X.25 support + curses
- $(MAKE) "MAKE=$(MAKE)" wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE -DFNFLOAT -DSUNX25 \
- -DCK_CURSES -DNOLEARN $(KFLAGS)" \
- "LIBS= $(LIBS) -lcurses -ltermcap -lresolv -lm"
-
-#SUN with Solaris 2.0 = SunOS 5.0.
-#Mostly the same as System V R4. Don't use this with later Solaris versions.
-solaris20:
- @echo 'Making C-Kermit $(CKVER) for Sun with Solaris 2.0 and curses...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DTCPSOCKET -DCK_CURSES -DFNFLOAT -DCK_POLL $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermlib -lm" "LNKFLAGS = -s"
-
-#SUN with Solaris 2.0.
-#As above, but built with the gcc compiler from the Cygnus CD-ROM.
-solaris20g:
- @echo 'Making C-Kermit $(CKVER) for Sun Solaris 2.0, gcc, and curses..'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DTCPSOCKET -DCK_CURSES -DCK_POLL -DFNFLOAT $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermlib -lm" "LNKFLAGS = -s" \
- CC=/opt/cygnus-sol2-1.1/bin/gcc CC2=/opt/cygnus-sol2-1.1/bin/gcc
-
-#SunOS 5.1 = Solaris 2.1.
-#NOTE: A C compiler is no longer bundled with SunOS 5.1, so to compile C
-#programs, you might have to change your PATH to include the directory
-#/usr/ccs/bin AFTER the directory containing the compiler. SunPRO C is
-#installed by default in /opt/SUNWspro/bin. So a sample PATH might be:
-#
-# /usr/local/bin:/usr/bin:/opt/SUNWspro/bin:/usr/ccs/bin:\
-# /usr/ucb:/usr/sbin:/sbin:.
-#
-# or:
-#
-# /usr/openwin/bin:/export/home/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin.
-#
-#NOTE 2: Compilation with the Apogee C compiler (apcc) might not work,
-#because it refuses to allow "-Usun". Reportedly, newer releases of apcc
-#(such as 1.2.17) work OK, use: "make -e sunos51 CC=apcc CC2=apcc".
-solaris21:
- @echo 'Making C-Kermit $(CKVER) for SunOS 5.x....'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -Usun -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DFNFLOAT \
- -DSELECT -DNODEBUG -DSTERMIOX $(KFLAGS)" "LIBS = -lm" "LNKFLAGS = -s"
-
-#C-Kermit for Solaris 2.0-2.4 compiled with gcc, includes curses and TCP/IP.
-#Change -O2 to -O if -O2 gives trouble.
-#Remove -Usun if it causes trouble.
-#Your PATH should start with something like:
-# /usr/local/gnu/bin:/usr/ccs/bin:
-#Produces a huge executable -- strip with /usr/ccs/bin/strip (not Gnu strip).
-#Also don't add "LNKFLAGS = -s" -- strip manually instead.
-#Also note: this can NOT be linked statically - Sun makes it impossible.
-#And for Solaris 2.4, you might have to replace:
-# /usr/local/lib/gcc-lib/i486-sun-solaris2/2.4.5/include/sys/stat.h
-#with /usr/include/sys/stat.h.
-solaris2xg:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with GNU cc...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv $(LIBS)"
-
-#ditto but no curses.
-solaris2xgnc:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with GNU cc...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lm -lresolv $(LIBS)"
-
-#and with Kerberos IV
-solaris2xg+krb4:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with GNU cc, krb4...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION \
- -DCK_DES -DCK_CAST -DBIGBUFOK $(K4INC) $(KFLAGS)" \
- "LIBS= $(K4LIB) -ltermlib -lsocket -lnsl -lm -lresolv -lkrb -ldes \
- $(LIBS)"
-
-#and with OpenSSL,ZLIB,PAM,SHADOW
-solaris2xg+openssl+zlib+pam+shadow:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DCK_SHADOW -DZLIB \
- -DBIGBUFOK $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -ltermlib \
- -lsocket -lnsl -lm -lresolv -lssl -lcrypto -lpam -lz"
-
-#Ditto but with GCC 3.1 in which you have to specify 32-bit with -m32.
-#In Solaris 9 (and maybe 8) you'll also need specifiy the Library path.
-#Reportedly this can't be done here, but only with:
-# crle -l /usr/lib:/usr/local/ssl/lib
-#prior to building. Note: 64-bit not tested with SSL.
-#For no-crypto 64-bit builds see the solaris9g64 target.
-solaris2xg32+openssl+zlib+pam+shadow:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC="gcc -m32" CC2="gcc -m32" \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DCK_SHADOW -DZLIB \
- -DBIGBUFOK $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -ltermlib \
- -lsocket -lnsl -lm -lresolv -lssl -lcrypto -lpam -lz"
-
-#and with Krb5,Krb4,OpenSSL,SHADOW
-solaris2xg+krb5+krb4+openssl+shadow:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc,k5,k4,ssl...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_SSL -DCK_DES -DCK_CAST -DBIGBUFOK \
- $(K5INC) $(K5INC)/krb5 $(SSLINC) $(KFLAGS)" \
- "LIBS= $(K5LIB) $(SSLLIB) -ltermlib -lsocket -lnsl -lm -lresolv \
- -lkrb4 -lssl -lcrypto -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto \
- -ldes $(LIBS)"
-
-#and with OpenSSL
-solaris2xg+openssl+pam+shadow:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DCK_SHADOW \
- -DBIGBUFOK $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -ltermlib \
- -lsocket -lnsl -lm -lresolv -lssl -lcrypto -lpam"
-
-solaris2xg+openssl+zlib+srp+pam+shadow:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET -DBIGBUFOK \
- -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_DES -DLIBDES -DCK_CAST \
- -DCK_SSL -DCK_PAM -DCK_SHADOW -DZLIB -DCK_SRP $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -ltermlib -lsocket -lnsl -lm -lresolv -lsrp -lssl \
- -ldes -lkrypto -lcrypto -lpam -lz"
-
-solaris22g:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DPOSIX_CRTSCTS $(KFLAGS)" solaris2xg \
- KTARGET=$${KTARGET:-$(@)}
-
-solaris23g:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DPOSIX_CRTSCTS $(KFLAGS)" solaris2xg \
- KTARGET=$${KTARGET:-$(@)}
-
-#Solaris 2.4 built with gcc
-solaris24g:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} \
- solaris2xg "KFLAGS=-DSOLARIS24 -DPOSIX_CRTSCTS $(KFLAGS)"
-
-#Solaris 2.5 built with gcc
-solaris25g:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-funsigned-char -DSOLARIS25 $(KFLAGS)"
-
-#Solaris 2.5 built with gcc and Kerberos IV
-solaris25g+krb4:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb4 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-funsigned-char -DSOLARIS25 $(KFLAGS)"
-
-#Solaris 2.5 built with gcc and Kerberos V/IV, SSL, ...
-solaris25g+krb5+krb4+openssl+shadow:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb5+krb4+openssl+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-funsigned-char -DSOLARIS25 $(KFLAGS)"
-
-#Solaris 2.6 with gcc
-solaris26g:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xg \
- "KFLAGS= -DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS = -lpam"
-
-#Solaris 2.6 with gcc and SSL
-solaris26g+openssl:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS= -DSOLARIS26 $(KFLAGS)"
-
-#Solaris 2.6 with gcc, no curses (e.g. because libtermlib is missing).
-solaris26gnc:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xgnc \
- "KFLAGS= -DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
-
-#Solaris 7 with gcc (32-bit)
-solaris7g:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
-
-#Solaris 7 with gcc + Kerberos IV (32-bit)
-solaris7g+krb4:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb4 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
-
-solaris7g+openssl+zlib+pam+shadow:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)"
-
-#Solaris 7 with gcc + OpenSSL (32-bit)
-solaris7g+openssl+zlib+srp+pam+shadow:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+srp+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)"
-
-#Solaris 8 with gcc (32-bit)
-solaris8g:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS8 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
-
-#Solaris 9 with gcc + OpenSSL + Shadow (32-bit)
-solaris9g+openssl+shadow+pam+zlib:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS9 -DHDBUUCP -DDIRENT -DZLIB -DCK_PAM -DCK_SHADOW \
- -DLIBDES $(KFLAGS)" "LIBS= -lpam -ldes425 -lz $(LIBS)"
-
-#Solaris 9 with gcc + OpenSSL + Kerberos 5 + Krb4 + Shadow (32-bit)
-solaris9g+krb5+krb4+openssl+shadow+pam+zlib:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb5+krb4+openssl+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS9 -DHDBUUCP -DDIRENT -DZLIB -DCK_PAM -DCK_SHADOW \
- -DLIBDES $(KFLAGS)" "LIBS= -lpam -ldes425 -lz $(LIBS)"
-
-#Solaris 9 with gcc 3.1 (32-bit)
-solaris9g:
- @echo 'Making C-Kermit $(CKVER) for Solaris 9 with gcc'
- $(MAKE) "MAKE=$(MAKE)" CC="gcc -m32" CC2="gcc -m32" xermit \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSOLARIS9 -DUSE_STRERROR \
- -DSTERMIOX -DSELECT -DFNFLOAT -DCK_PAM -DCK_SHADOW -funsigned-char \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv -lpam"
-
-#Solaris 9 with gcc 3.1 (64-bit)
-#Peeking inside struct FILE at its members ist strengst verboten.
-solaris9g64:
- @echo 'Making C-Kermit $(CKVER) for Solaris 9 with gcc'
- $(MAKE) "MAKE=$(MAKE)" CC="gcc -m64" CC2="gcc -m64" xermit \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSOLARIS9 -DNOARROWKEYS \
- -DSTERMIOX -DSELECT -DFNFLOAT -DUSE_STRERROR -DCK_PAM -DCK_SHADOW \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv -lpam"
-
-# In OpenSSL builds add -ldl if you get unresolved references for
-# dlclose, dlsym, dlopen, dlerror.
-
-#Solaris 8 with gcc + OpenSSL (32-bit)
-solaris8g+openssl+zlib+pam+shadow:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DSOLARIS8 $(KFLAGS)"
-
-#Solaris 9 with gcc 3.1 + OpenSSL (32-bit)
-solaris9g+openssl+zlib+pam+shadow:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg32+openssl+zlib+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS9 -DUSE_STRERROR $(KFLAGS)"
-
-#Solaris 8 with gcc + Kerberos IV (32-bit)
-solaris8g+krb4:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb4 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS8 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
-
-#Solaris 2.0-2.4, gcc, SunLink X.25 added.
-#NOTE: Can't use xermit target with X.25.
-solaris2xgx25:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x + X.25 with GNU cc...'
- @echo 'Please read the comments that accompany the solaris2xg entry.'
- $(MAKE) wermit CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DSUNX25 \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET -DFNFLOAT \
- -DNOLEARN $(KFLAGS)" \
- "LIBS= -ltermlib -lm -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
- -lsockx25 -lsocket -lnsl"
-
-#Solaris 2.5, gcc, SunLink X.25 added.
-solaris25gx25:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xgx25 \
- "KFLAGS=-DSOLARIS25 $(KFLAGS)"
-
-#Solaris 2.6, gcc, SunLink X.25 added.
-solaris26gx25:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xgx25 \
- "KFLAGS=-DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
-
-#Solaris 2.0 - 2.4, SunPro compiler, includes curses and TCP/IP.
-#When using SUNWspro CC 2.0.1 under Solaris 2.3, be sure all cc patches
-#are applied, otherwise corrupt or truncated object files can result.
-#To build, set your PATH as follows:
-# /usr/local/bin:/usr/bin:/opt/SUNWspro/bin:/usr/ccs/bin:\
-# /usr/ucb:/usr/sbin:/sbin:.
-# or (depending on where the compiler has been installed):
-# /usr/openwin/bin:/export/home/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin.
-#For additional optimization try using "-fast -xO4 -xdepend".
-solaris2x:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with SunPro cc...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -Usun -i -DSVR4 -DDIRENT -DSOLARIS -DHDBUUCP -DFNFLOAT \
- -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv"
-
-#as above but configured for Kerberos IV
-solaris2x+krb4:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x, SunPro cc, krb4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -Usun -i -DSVR4 -DDIRENT -DSOLARIS -DHDBUUCP -DFNFLOAT \
- -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 \
- -DCK_ENCRYPTION -DCK_DES -DCK_CAST $(K4INC) $(KFLAGS)" \
- "LNKFLAGS = -s" \
- "LIBS= $(K4LIB) -ltermlib -lsocket -lnsl -lm -lresolv -lkrb -ldes"
-
-solaris23:
- $(MAKE) "MAKE=$(MAKE)" solaris2x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS)"
-
-solaris24:
- $(MAKE) "MAKE=$(MAKE)" solaris2x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS24 -DPOSIX_CRTSCTS $(KFLAGS)"
-
-# template for Solaris 2.5 and above.
-solaris25x:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with SunPro cc...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DFNFLOAT -O -Usun -i $(KFLAGS)" \
- "LNKFLAGS = -s" \
- "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv $(LIBS)"
-
-#Solaris 2.5, SunPro compiler, curses, TCP/IP
-solaris25:
- $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS25 $(KFLAGS)"
-
-#Solaris 2.5, SunPro compiler, curses, TCP/IP, Kerberos IV
-solaris25+krb4:
- $(MAKE) "MAKE=$(MAKE)" solaris25x+krb4 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS25 $(KFLAGS)"
-
-#Solaris 2.6, SunPro compiler, curses, TCP/IP
-solaris26:
- $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
-
-#Solaris 7 (aka 2.7)
-solaris7:
- $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
-
-#Solaris 8
-solaris8:
- $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS8 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
-
-#Solaris 9
-solaris9:
- $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS9 -DCK_PAM -DCK_SHADOW -DUSE_STRERROR $(KFLAGS)" \
- "LIBS= -lpam"
-
-#Solaris 9 with malloc debugging
-solaris9md:
- $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DFNFLOAT -O -Usun -i \
- -DSOLARIS9 -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG \
- -DCK_PAM -DCK_SHADOW -DUSE_STRERROR $(KFLAGS)" \
- "LIBS= -lpam -ltermlib -lsocket -lnsl -lm -lresolv"
-
-#Solaris 2.0-2.3, SunPro compiler, with SunLink X.25 support.
-#This will only run if user has /opt/SUNWconn/lib/libsockx25.so.1
-#exists and can be dynamically linked.
-#NOTE: Do not change target to xermit -- it doesn't support X.25.
-solaris2x25:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x+X.25 with SunPro cc...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS -DDIRENT \
- -DSUNX25 -DTCPSOCKET -DHDBUUCP -DFNFLOAT -DNOLEARN \
- -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX $(KFLAGS)" \
- "LNKFLAGS = -s" \
- "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
- -lsockx25 -lsocket -lnsl -lm -lresolv"
-
-#Solaris 2.4, SunPro compiler, with SunLink X.25 support.
-#This will only run if user has /opt/SUNWconn/lib/libsockx25.so.1
-#exists and can be dynamically linked.
-solaris24x25:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.4+X.25 with SunPro cc...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS -DSOLARIS24 -DDIRENT -DNOLEARN \
- -DSUNX25 -DTCPSOCKET -DHDBUUCP -DFNFLOAT -DPOSIX_CRTSCTS \
- -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX $(KFLAGS)" \
- "LNKFLAGS = -s" \
- "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
- -lsockx25 -lsocket -lnsl -lm -lresolv"
-
-#Solaris 2.5, SunPro compiler, with SunLink X.25 support.
-solaris25x25:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.5+X.25 with SunPro cc...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS25 -DDIRENT -DSUNX25 \
- -DTCPSOCKET -DHDBUUCP -DSELECT -DCK_CURSES \
- -DCK_NEWTERM -DSTERMIOX -DFNFLOAT -DPOSIX_CRTSCTS -DNOLEARN \
- -I/opt/SUNWconn/include $(KFLAGS)" \
- "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
- -lsockx25 -lsocket -lnsl -lm -lresolv"
-
-#Solaris 2.6, SunPro compiler, with SunLink X.25 support.
-solaris26x25:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.6+X.25 with SunPro cc...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS26 -DDIRENT -DSUNX25 \
- -DTCPSOCKET -DHDBUUCP -DSELECT -DCK_CURSES -DCK_PAM -DCK_SHADOW \
- -DCK_NEWTERM -DSTERMIOX -DFNFLOAT -DPOSIX_CRTSCTS -DNOLEARN \
- -I/opt/SUNWconn/include $(KFLAGS)" \
- "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
- -lsockx25 -lsocket -lnsl -lm -lresolv -lpam"
-
-#The following sunosxxx entries are for debugging and testing only.
-
-sunos41x:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS41 -DDIRENT -DNOTLOG -DNOMSEND \
- -DNOUUCP -DNOSIGWINCH -DNOREDIRECT -DNOPUSH -DNOCCTRAP \
- -DNOICP -DNOLOCAL $(KFLAGS)"
-
-#SunOS 4.1.x, debugging with Pure Software, Inc., Purify 2 (commercial runtime
-#error-detection software for catching wild array references, etc).
-#Before running the resulting wermit, you'll also need to define and export
-#the following environment variables (as in this example):
-#PURIFYHOME=/usr/local/purify ; export PURIFYHOME
-#PURIFYCACHEDIR=/tmp ; export PURIFYCACHEDIR
-sunos41cp:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 / BSD / Curses / Purify...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CC2= purify -cache_dir=/usr/tmp cc" \
- "CFLAGS= -g -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \
- -DSAVEDUID -DCK_CURSES $(KFLAGS)" \
- "LIBS= -lcurses -ltermcap"
-
-#SunOS 4.1 with malloc debugger
-sunos41md:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 malloc debug...
- $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \
- -DSAVEDUID $(KFLAGS) -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG"
-
-sunos41gmd:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
- $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} "CC= gcc " "CC2= gcc" \
- "CFLAGS= -g -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \
- -DNDGPWNAM -DSAVEDUID -DCK_CURSES -DRLOGCODE \
- $(KFLAGS) -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG" \
- "LIBS= -lcurses -ltermcap"
-
-#SunOS version 4.1, gcc, profiling with gprof, no debugging.
-#To get profile, "make sunos41p" (on Sun), then "./wermit". After running
-#wermit, "gprof ./wermit | lpr" (or whatever) to get execution profile.
-sunos41p:
- @echo Making C-Kermit $(CKVER) for SunOS 4.x with profiling...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc " "CC2= gcc" \
- "CFLAGS= -DSUNOS41 -DNODEBUG -DSAVEDUID -DDIRENT -DTCPSOCKET \
- -DNDGPWNAM $(KFLAGS) -pg" "LNKFLAGS = -pg"
-
-#SunOS version 4.1 or later, BSD environment, minimum features.
-sunos41min:
- @echo Minimum interactive
- $(MAKE) "MAKE=$(MAKE)" sunos41 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOSPL -DNOXMIT -DNOMSEND -DNOFRILLS -DNORETRY \
- -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS \
- -DNOSHOW -DNOSETKEY -DNOUUCP -DNORECALL -DNOREDIRECT \
- -DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ \
- -DNONET -DCK_SMALL -DNOCKSPEED -DNOCKTIMERS -DNOLOGIN \
- -DNOCKXYZ -DNOKERBEROS -DNOMKDIR -DNOPATTERNS -DNOPERMS -DNOPIPESEND \
- -DNORECURSIVE -DNORENAME -DNORESEND -DNOSETKEY \
- -DNOTRIGGER -DNOTUNING $(KFLAGS)" "LNKFLAGS = -s"
-
-#SunOS version 4.1, BSD environment, min size, command-line only...
-sunos41m:
- @echo Minimum size
- $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOICP $(KFLAGS)"
-
-#SunOS version 4.1, BSD environment, min size, cmd-line only, remote only...
-#
-sunos41mr:
- @echo Minimum size
- $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOICP -DNOLOCAL $(KFLAGS)"
-
-#SunOS version 4.1, BSD environment, min size, interactive...
-sunos41mi:
- @echo Minimum size
- $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOCMDL $(KFLAGS)"
-
-#SunOS version 4.1, BSD environment, min size, interactive, remote only...
-sunos41mir:
- @echo Minimum size
- $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOCMDL -DNOLOCAL $(KFLAGS)"
-
-#SunOS 4.1, System V R3 environment (-i option omitted).
-sunos41s5:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3...
- @echo For testing purposes only - NOT for production use.
- @echo For a useable version, make sunos41 instead.
- $(MAKE) wermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP -DNOLEARN -DCK_POLL $(KFLAGS) -O"
-
-#As above, but with curses support
-sunos41s5c:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3...
- @echo Curses included.
- @echo For testing purposes only - NOT for production use.
- @echo For a useable version, make sunos41 instead.
- $(MAKE) wermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP -DNOLEARN \
- -DCK_POLL -DCK_CURSES -DCK_NEWTERM $(KFLAGS) -O" "LIBS= -lcurses"
-
-#As above, but with curses support AND net support
-sunos41s5tcpc:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3...
- @echo TCP/IP and curses included. No debug log.
- @echo For testing purposes only - NOT for production use.
- @echo For a useable version, make sunos41 instead.
- $(MAKE) xermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP -DCK_POLL \
- -DNODEBUG -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET $(KFLAGS) -O" \
- "LIBS= -lcurses -lresolv"
-
-# (End of SunOS test entries...)
-
-#Apollo with Domain SR10.0 or later, BSD environment
-#Reportedly, it might also help to add '-A,systype=bsd4.3' to CFLAGS.
-#Reportedly, there is also a problem with getc & putc macros that can
-#be handled by using '#ifdef apollo' somewhere to redefine them???
-#On the other hand, other reports indicate that it works fine as-is.
-#NOTE: This entry was previously like this:
-# $(MAKE) wermit "CFLAGS= -DNOFILEH -DBSD4 $(KFLAGS) -Uaegis \
-# -DTCPSOCKET -U__STDC__"
-#Reports (Dec 91) indicate SR10 has an ANSI-compliant C compiler,
-#in addition to an older one that claimed to be ANSI-compliant but wasn't.
-#The following make entry (plus checks that are made in ckcdeb.h) detect
-#which compiler is used and define the CK_ANSIC or NOANSI flags accordingly.
-sr10-bsd:
- @echo Making C-Kermit $(CKVER) for Apollo SR10.0 / BSD ...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DAPOLLOSR10 -DBSD43 -DTCPSOCKET -DCK_CURSES -DNOLEARN \
- -Uaegis $(KFLAGS)" "LIBS= -lcurses -ltermcap"
-
-#Apollo with Domain SR10.0 or later, System V R3 environment.
-#Don't use the optimizer (-O), it causes problems at runtime.
-sr10-s5r3:
- @echo Making C-Kermit $(CKVER) for Apollo SR10.0 / Sys V R3 ...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNOFILEH -DSVR3 -DAPOLLOSR10 -DNOLEARN $(KFLAGS) \
- -Uaegis -U__STDC__"
-
-#Apollo Domain/IX (untested, try this if sr10-bsd doesn't work)
-# -DTCPSOCKET can probably be added here.
-apollobsd:
- @echo Making C-Kermit $(CKVER) for Apollo Domain/IX...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CC= /bin/cc " "CC2= /bin/cc " \
- "CFLAGS= -DNOFILEH -DBSD4 -DAPOLLOBSD -DNOLEARN $(KFLAGS) -Uaegis"
-
-#Version 7 Unix (see comments near top of makefile)
-v7:
- @echo Making C-Kermit $(CKVER) for UNIX Version 7.
- @echo Read the makefile if you have trouble with this...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS=-DV7 -DPROCNAME=\\\"$(PROC)\\\" \
- -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
- -DNPTYPE=$(NPTYPE) $(DIRECT) -DO_RDWR=2 -DO_NDELAY=0 -DO_SCCS_ID \
- -DNOLEARN $(KFLAGS)"
-
-#AT&T UNIX System V R3, signal() is void rather than int.
-#Uses dirent.h and Honey DanBer UUCP.
-#Add the -i link option if necessary.
-#If you get errors like "ws_row undefined" in ckutio.c, add -DNONAWS.
-sys5r3:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS="
-
-#As above, plus curses.
-sys5r3c:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3 + curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DCK_CURSES -DNONAWS -DNOLEARN \
- $(KFLAGS) -O" "LNKFLAGS=" "LIBS = -ltermlib"
-
-#System V R3.2 for PCs built on Interactive UNIX SV/386 R4.x
-#but with all calls to dup2() disabled because generic SVR3 does not have dup2.
-# (The -linet library might not need to be in this one.)
-sys5r32is:
- @echo 'Making C-Kermit $(CKVER) for System V/386 R32
- $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \
- -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES -DNONAWS \
- -DPOSIX_JC -DCK_REDIR -DCK_POLL -DDCLGETCWD -DNOFDZERO -DNOREDIRECT \
- -DNOZEXEC -DNOLEARN $(KFLAGS)" "LIBS=-lcurses -lc_s -linet"
-
-#System V R3.2 for PCs built on Interactive UNIX SV/386 R4.x
-#but with all calls to dup2() disabled because generic SVR3 does not have dup2.
-#With TCP/IP added.
-sys5r32isnet:
- @echo 'Making C-Kermit $(CKVER) for System V/386 R32 + TCP/IP
- $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \
- -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES -DNONAWS \
- -DPOSIX_JC -DCK_REDIR -DCK_POLL -DDCLGETCWD -DNOFDZERO -DNOREDIRECT \
- -DNOLEARN -DNOZEXEC -DTCPSOCKET $(KFLAGS)" "LIBS=-lcurses -lc_s -linet"
-
-iclsys5r3:
- make sys5r3 KTARGET=$${KTARGET:-$(@)} KFLAGS=-DICLSVR3
-
-#AT&T UNIX System V R3. As above, but no ANSI prototyping.
-sys5r3na:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DNOANSI -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS="
-
-#AT&T UNIX System V R3, for 3B computers with Wollongong TCP/IP.
-sys5r3net3b:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX SVR3/3B/Wollongong...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DWOLLONGONG -DNOLEARN $(KFLAGS) \
- -O" "LIBS= -lnet -lnsl_s" "LNKFLAGS ="
-
-#AT&T UNIX System V R3, signal() is void rather than int.
-#Uses dirent.h and Honey DanBer uucp, has <termiox.h>.
-#Has <termiox.h> for RTS/CTS flow control.
-sys5r3tx:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTERMIOX -DNOLEARN \
- $(KFLAGS) -i -O" "LNKFLAGS ="
-
-#AT&T UNIX System V R3, signal() is void rather than int.
-#Uses dirent.h and Honey DanBer uucp, has <termiox.h>.
-#Has <sys/termiox.h> for RTS/CTS flow control.
-sys5r3sx:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DSTERMIOX -DNOLEARN \
- $(KFLAGS) -i -O" "LNKFLAGS ="
-
-#AT&T UNIX System V R4.
-#Has <termiox.h>.
-sys5r4:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DTERMIOX -DNOLEARN $(KFLAGS)" \
- "LNKFLAGS = -s"
-
-#AT&T UNIX System V R4 with Wollongong TCP/IP.
-#Has <termiox.h>.
-sys5r4net:
- @echo 'Making C-Kermit $(CKVER) for System V R4 + Wollongong TCP/IP...'
- @echo ' If sockets-library routines are missing at link time, then'
- @echo ' try the sys5r4net2 entry.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOLEARN \
- -DTERMIOX -DWOLLONGONG $(KFLAGS)" "LNKFLAGS = -s"
-
-#As above, but needs libs included.
-sys5r4net2:
- @echo ' PLEASE READ ckuins.txt IF YOU GET MISSING HEADER FILES.'
- @echo ' (Search for WOLLONGONG...)'
- $(MAKE) sys5r4net KTARGET=$${KTARGET:-$(@)} "LIBS= -lsocket -lnsl"
-
-#As above plus curses.
-sys5r4net2c:
- echo 'Making C-Kermit $(CKVER) for System V R4 + Wollongong TCP/IP...'
- @echo ' PLEASE READ ckuins.txt IF YOU GET MISSING HEADER FILES.'
- @echo ' (Search for WOLLONGONG...)'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOLEARN \
- -DTERMIOX -DWOLLONGONG -DCK_CURSES $(KFLAGS)" "LNKFLAGS = -s" \
- "LIBS= -lsocket -lnsl -lcurses"
-
-#DELL UNIX System V R4.
-#Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
-#are not misplaced in sys (rather than netinet and arpa, respectively).
-#Uses ANSI C constructs, advisory file locking on devices, etc.
-#Warning: -DSTERMIOX enables hardware flow control (RTS/CTS), but reportedly
-#this does not work with the normal drivers. However, it might still work
-#on non-Dell systems, or even Dell systems with different drivers installed.
-dellsys5r4:
- @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT -DHDBUUCP \
- -DTCPSOCKET -DSTERMIOX -DCK_POLL $(KFLAGS)" \
- "LIBS= -lsocket -lnsl" "LNKFLAGS = -s"
-
-#As above, curses support added...
-dellsys5r4c:
- @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT -DHDBUUCP \
- -DTCPSOCKET -DSTERMIOX -DCK_CURSES -DCK_POLL \
- $(KFLAGS)" "LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s"
-
-#Minimum interactive: As above, but with every conceivable option removed.
-dellsys5r4mi:
- @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
- @echo 'Minimum-size interactive'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT \
- -UTCPSOCKET -DNOCMDL -DNOSPL -DNOXMIT -DCK_POLL \
- -DNOMSEND -DNOFRILLS -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
- -DNOSCRIPT -DNOCSETS -DNOSHOW -DNOSETKEY -DNOSERVER -DNOUUCP \
- -DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ \
- $(KFLAGS)" "LNKFLAGS = -s"
-
-#Command-line only version.
-dellsys5r4m:
- @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
- @echo 'Command-line only'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT \
- -UTCPSOCKET -DNOICP -DNOFRILLS -DNODIAL -DNODEBUG -DNOTLOG -DNOCSETS \
- -DNOSETKEY -DNOESCSEQ -DNOJC -DNOFDZERO -DCK_POLL \
- $(KFLAGS)" "LNKFLAGS = -s"
-
-#AT&T UNIX System V R4.
-#Has <sys/termiox.h>.
-sys5r4sx:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DSTERMIOX -DNOLEARN \
- $(KFLAGS)" "LNKFLAGS = -s" "LIBS=$(LIBS)"
-
-#AT&T UNIX System V R4.
-#Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
-#are not misplaced in sys (rather than netinet and arpa, respectively).
-#Uses ANSI C constructs, <sys/termiox.h>, etc etc.
-sys5r4sxtcp:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl $(LIBS)" "LNKFLAGS= -s"
-
-#AT&T UNIX System V R4.
-#As above + curses.
-sys5r4sxtcpc:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DCK_CURSES -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap $(LIBS)" "LNKFLAGS = -s"
-
-#AT&T UNIX System V R4. CONSENSYS SVR4.2-1.
-#Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
-#are not misplaced in sys (rather than netinet and arpa, respectively).
-#Uses ANSI C constructs, <sys/termiox.h>, etc.
-# Fullscreen -DCK_CURSES added (with curses & termcap libs)
-# Submission by Robert Weiner/Programming Plus, rweiner@watsun.cc.columbia.edu
-sys5r4sxtcpf:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -L/usr/ccs/lib -lcurses -ltermcap" \
- "LIBS=$(LIBS)" "LNKFLAGS = -s"
-
-#Smallest possible version for System V R4
-s5r4m:
- @echo Minimum size
- $(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
- -DNOSCRIPT -DNOCSETS -DNOICP -DNOMSEND -UTCPSOCKET" "LNKFLAGS = -s"
-
-#Smallest possible interactive version of above
-s5r4mi:
- @echo Minimum interactive
- $(MAKE) "MAKE=$(MAKE)" sys5r4sx \
- "KFLAGS=-DNOSPL -DNOXMIT -DNOMSEND -DNOFRILLS -DNOSHOW \
- -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS -DNOSETKEY \
- -UTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s"
-
-#AT&T UNIX System V R4, has <sys/termiox.h>
-#ANSI C function prototyping disabled.
-sys5r4sxna:
- @echo No ANSI C prototyping...
- $(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DNOANSI"
-
-#Stratus FTX.
-ftx:
- @echo 'Making C-Kermit $(CKVER) for Stratus FTX 3.x...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DFTX -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DNOGETUSERSHELL -DNOLEARN +DA1.1 $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS=$(LIBS)"
-
-#Stratus FTX + TCP/IP.
-ftxtcp:
- @echo 'Making C-Kermit $(CKVER) for Stratus FTX 3.x...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DFTX -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DSTERMIOX -DTCPSOCKET -DNO_DNS_SRV +DA1.1 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl $(LIBS)" "LNKFLAGS= -s"
-
-#NCR MP-RAS 2.03 or 3.02
-mpras:
- @echo 'Making C-Kermit $(CKVER) for NCR MP-RAS...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DNCRMPRAS -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DNOGETUSERSHELL -DUSE_FILE__CNT -DNOLEARN -DNO_DNS_SRV $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS=$(LIBS)"
-
-#NCR MP-RAS 2.03 or 3.02 with TCP/IP and curses
-mprastcpc:
- @echo 'Making C-Kermit $(CKVER) for NCR MP-RAS + TCP/IP + curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CFLAGS=-DTCPSOCKET \
- -DCK_CURSES -DSVR4 -DNCRMPRAS -DDIRENT -DHDBUUCP -DSTERMIOX -DNOLEARN \
- -DNOGETUSERSHELL -DNO_DNS_SRV DUSE_FILE__CNT -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS= -lsocket -lnsl -lcurses -ltermcap $(LIBS)"
-
-#SINIX-L V5.41 - includes curses, tcp/ip - Use this one for i386.
-#This version of SINIX doesn't like fdopen() or popen().
-sinix541:
- @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf SINIX V5.41/i386'
- $(MAKE) ckcpro.$(EXT) "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DNO_DNS_SRV \
- -DSNI541 -DNOGETUSERSHELL -DNONETCMD -DNOPOPEN -kansi -W0 $(KFLAGS)"
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DNO_DNS_SRV -DNOPOPEN \
- -DFNFLOAT -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC \
- -DSNI541 -DNOGETUSERSHELL -DNONETCMD -kansi -W0 -O $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" "LNKFLAGS = -s"
-
-sinix541i:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sinix541
-
-#SINIX V5.42 - includes curses, tcp/ip, everything - Use this one for MIPS.
-# As of C-Kermit 7.1, optimization removed -- takes (literally) forever.
-sinix542:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DNO_DNS_SRV \
- -DFNFLOAT -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC \
- -DSNI542 -DNOGETUSERSHELL -kansi -W0 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" "LNKFLAGS = -s"
-
-#SINIX V5.42 gcc - includes curses, tcp/ip, everything.
-#This one was used to build the Pyramid-architecture RM600 version
-#on SINIX-P 5.42 A10 with gcc but should work for SINIX 5.42 on any other
-#architecture with gcc.
-sinix542g:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC=gcc" "CC2=gcc" \
- "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DNO_DNS_SRV \
- -DFNFLOAT -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC \
- -DSNI542 -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" \
- "LNKFLAGS = -s"
-
-#SINIX V5.42 - includes curses, tcp/ip, everything - Use this one for Intel.
-# (Note: SNI discontinued Intel support after 5.42.)
-sinix542i:
- @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf SINIX-Z V5.42...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DFNFLOAT -DSTERMIOX \
- -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DNO_DNS_SRV -kansi \
- -DSNI542 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" \
- "LNKFLAGS = -s"
-
-#Siemens Nixdorf Reliant UNIX V5.43 - includes curses, tcp/ip, everything:
-# . gettimeofday() suddenly has only one arg instead of two (GTODONEARG).
-# . The syntax of the Olimit specifier changed.
-# . The name was changed from SINIX to Reliant UNIX in version 5.43C.
-sni543:
- @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf Reliant UNIX V5.43'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSINIX -DSNI543 -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DGTODONEARG \
- -DNO_DNS_SRV -kansi -W0 -O -F Olimit,3100 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s"
-
-#Siemens Nixdorf Reliant UNIX V5.44 - Like 5.43 but with different banner.
-sni544:
- @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf Reliant UNIX V5.44'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSINIX -DSNI544 -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DGTODONEARG \
- -DNO_DNS_SRV -kansi -W0 -O -K Olimit,3100 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s"
-
-#Commodore Amiga with AT&T UNIX System V R4 and TCP/IP support.
-#Has <sys/termiox.h>.
-svr4amiganet:
- @echo 'Making C-Kermit $(CKVER) for Amiga SVR4 + TCP/IP...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC=gcc" "CC2=gcc" \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DTCPSOCKET -DCK_CURSES $(KFLAGS)" "LNKFLAGS = -s" \
- "LIBS = -lsocket -lnsl -ltermlib"
-
-#SCO (Novell (Univel)) UnixWare 1.x or 2.0, no TCP/IP.
-#This assumes the Novell SDK 1.0, which has <sys/termiox.h>.
-#UnixWare users with the "Prime Time Freeware" CD-ROM SDK will probably have
-#to use the sys5r4 entry (no termiox.h file, so no hardware flow control).
-#Change -DSELECT to -DCK_POLL if -DSELECT causes problems.
-# NOTE: Unixware 1.x builds have not been tried in C-Kermit 7.0.
-unixware:
- $(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DOLD_UNIXWARE -DCK_NEWTERM -DSELECT -DNOGETUSERSHELL \
- -DNOSYSLOG $(KFLAGS)" "LIBS=-lcrypt"
-
-#UnixWare 1.x or 2.0 with TCP/IP and curses.
-#fork()-based CONNECT - no high serial speeds.
-unixwarenetc:
- $(MAKE) "MAKE=$(MAKE)" sys5r4sxtcpc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DOLD_UNIXWARE -DCK_NEWTERM -DSELECT -DNOGETUSERSHELL \
- -DNOSYSLOG $(KFLAGS)" "LIBS=-lcrypt -lresolv"
-
-uw10:
- $(MAKE) unixwarenetc KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
-
-#This is for Unixware 2.0.x only - use unixware21 for UW 2.1.x.
-#Has special library search and enables special kludge around library
-#foulup regarding vfork() (which Kermit doesn't use). Forces POSIX-style
-#hangup.
-unixware20:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 2.0.x...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DOLD_UNIXWARE -DUNIXWARE2 -DSELECT -DSVR4 -DDIRENT \
- -DHDBUUCP -DBIGBUFOK -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES \
- -DTCPSOCKET -DUW200 -DFNFLOAT -DCK_NEWTERM -DNOSYSLOG $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lcrypt -lgen -lm -lresolv" \
- "LNKFLAGS = -s"
-
-uw20:
- $(MAKE) unixware20 KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
-
-#Adds big buffers ("large memory model") - otherwise the same as UnixWare 1.x.
-unixware21:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 2.1.x...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DNOSYSLOG -DSTERMIOX -DCK_CURSES -DTCPSOCKET \
- -DCK_NEWTERM -DFNFLOAT -DUNIXWARE2 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv \
- $(LIBS)" "LNKFLAGS = -s"
-
-#Unixware 2.1.0
-uw21:
- $(MAKE) unixware21 KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
-
-#Unixware 2.1.3
-uw213:
- $(MAKE) unixware21 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DUSE_FILE__CNT $(KFLAGS)"
-
-#Unixware 2.1 with IKSD support
-uw21iksd:
- $(MAKE) unixware21 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DCK_SHADOW $(KFLAGS)" "LIBS= -lgen"
-
-#UnixWare 7 with tc[gs]etspeed() high serial speeds & select()-based CONNECT
-#NOTE: This is the one we use.
-unixware7t:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 7 with POSIX i/o...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DFNFLOAT -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \
- -DUW7 -DUSETCSETSPEED -DCK_NEWTERM -DNOLSTAT -DDCLTIMEVAL \
- -DNEEDMDMDEFS $(KFLAGS)" \
- "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
- "LNKFLAGS = -s"
-
-#UnixWare 7 - select()-based CONNECT - no POSIX i/o - no high serial speeds.
-#In other words, just like the UnixWare 1 and 2 builds.
-unixware7x:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 7...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DNOLSTAT \
- -DFNFLOAT -DCK_NEWTERM $(KFLAGS)" \
- "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
- "LNKFLAGS = -s"
-
-#UnixWare 7 with POSIX cfset[oi]speed() to allow high serial speeds.
-#(but the high speeds don't work)
-unixware7p:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 7 with POSIX i/o...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \
- -DFNFLOAT -DCK_NEWTERM -DNOLSTAT $(KFLAGS)" \
- "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
- "LNKFLAGS = -s"
-
-# UnixWare 7 built with gcc - This does not work at all...
-# Reportedly gcc 2.8.1 is broken on Unixware 7. Try egcs?
-unixware7g:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 7 with gcc...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s -shlib"
- "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DNOLSTAT \
- -DFNFLOAT -DCK_NEWTERM $(KFLAGS)" \
- "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
- "LNKFLAGS = -s"
-
-unixware7:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" unixware7t \
- KTARGET=$${KTARGET:-$(@)}
-
-uw7:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" unixware7t \
- KTARGET=$${KTARGET:-$(@)}
-
-#SCO OpenUNIX 8.0
-ou8:
- @echo 'Making C-Kermit $(CKVER) for Open UNIX 8...'
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DOU8 $(KFLAGS)" unixware7t \
- KTARGET=$${KTARGET:-$(@)}
-
-#UnixWare 7 with OpenSSL
-uw7ssl:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 7 and OpenSSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DCK_AUTHENTICATION -DCK_SSL -DCK_SHADOW \
- -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DFNFLOAT -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \
- -DUW7 -DUSETCSETSPEED -DCK_NEWTERM -DNOLSTAT -DDCLTIMEVAL \
- $(SSLINC) $(KFLAGS)" \
- "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv \
- -lgen -lcudk70 $(SSLLIB) -lssl -lcrypto $(LIBS)" \
- "LNKFLAGS = -s"
-
-#As above but includes Shadow password support needed for IKSD.
-uw7iksd:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DCK_SHADOW $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)} "LIBS= -lgen" unixware7t
-
-#As above but links with static API for realpath() so a binary built
-#with this target on UW7.1 will also work on 7.0. Requires SCO UDK
-#rather than the stock compiler.
-uw7iksdudk:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DCK_SHADOW $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)} "LIBS= -lgen -lcudk70" unixware7t
-
-#ESIX SVR4.0.3 or 4.04 with TCP/IP support.
-#Has <sys/termiox.h>, ANSI C function prototyping disabled.
-#Add -m486 to CFLAGS if desired.
-esixr4:
- @echo 'Making C-Kermit $(CKVER) for ESIX SVR4 + TCP/IP...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOANSI \
- -DSTERMIOX -DTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s" \
- "LIBS = -lsocket -lnsl"
-
-#AT&T UNIX System V R4.
-#Has <sys/termiox.h>, Wollongong WIN/TCP TCP/IP.
-sys5r4sxnet:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DWOLLONGONG $(KFLAGS)" "LNKFLAGS = -s"
-
-#AT&T UNIX System V R4, no <termio.x> or <sys/termio.x>.
-sys5r4nx:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOLEARN $(KFLAGS)" \
- "LNKFLAGS = -s"
-
-#AT&T UNIX System V R4, no <termio.x> or <sys/termio.x>, curses, TCP/IP.
-sys5r4nxnetc:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
- -DCK_CURSES -DTCPSOCKET $(KFLAGS)" \
- "LIBS = -lcurses -lsocket -lnsl -ltcpip" \
- "LNKFLAGS = -s"
-
-#AT&T UNIX System V R4, no <termio.x> or <sys/termio.x>, Wollongong TCP/IP.
-sys5r4nxtwg:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DWOLLONGONG $(KFLAGS)"
- "LNKFLAGS = -s"
-
-#ICL UNIX System V R4.(DRS N/X) version :-
-#UNIX System V Release 4.0 ICL DRS 6000 (SPARC)
-#DRS/NX 6000 SVR4 Version 5 Level 1 Increment 4
-#Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
-#are not misplaced in sys (rather than netinet and arpa, respectively).
-#Uses ANSI C constructs, advisory file locking on devices, etc.
-#Remove -lnsl if it causes trouble.
-iclsys5r4:
- @echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 (DRS N/X)'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lresolv " "LNKFLAGS = -s"
-
-#As above but for DRS/NX 4.2MP 7MPlus.
-iclsys5r4m+:
- @echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 DRS/NX 4.2MP+'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOIKSD \
- -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lm -lc -g -lgen " "LNKFLAGS = -s"
-
-#As above but for DRS/NX 4.2MP 7MPlus with IKSD support.
-iclsys5r4m+iksd:
- @echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 DRS/NX 4.2MP+'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lm -lc -g -lgen -lresolv " "LNKFLAGS = -s"
-
-iclsys5r4_486:
- $(MAKE) "MAKE=$(MAKE)" iclsys5r4 KTARGET=$${KTARGET:-$(@)}
-
-#Data General DG/UX 4.30 (System V R3) for DG AViiON, with TCP/IP support.
-dgux430:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 4.30...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX430 -DSVR3 -DDIRENT -DTCPSOCKET \
- -DNOINADDRX -DNOGETUSERSHELL $(KFLAGS)"
-
-#Data General DG/UX 4.30 for DG AViiON, with TCP/IP support with BSDisms.
-dgux430bsd:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 4.30...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX430 -D_BSD_SOURCE -DBSD4 \
- -DNOINADDRX -DTCPSOCKET -DNOGETUSERSHELL $(KFLAGS)"
-
-#Data General DG/UX 5.4 (System V R4) for DG AViiON, with TCP/IP support.
-#Add -lsocket -lnsl if inet_addr comes up missing...
-#Hmmm - I really think CK_POLL can be removed from this one in which case
-#there is no difference between dgux540 and dgux540i.
-dgux540:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
- -DSTERMIOX -DTCPSOCKET -DCK_POLL -DNOGETUSERSHELL $(KFLAGS)"
-
-#Data General DG/UX 5.40 (System V R4) for Intel AViiON, with TCP/IP support.
-dgux540i:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
- -DSTERMIOX -DTCPSOCKET -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS = -lsocket -lnsl"
-
-dgux54:
- make dgux540 KTARGET=$${KTARGET:-$(@)}
-
-#Data General DG/UX 5.4 (= System V R4) for DG AViiON, with TCP/IP support.
-# And curses.
-dgux540c:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- $(KFLAGS)" "LIBS= -lcurses8 -ltermcap" "LNKFLAGS = -s"
-
-#As above but for Intel - only difference is name library names.
-dgux540ic:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- $(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
-
-dgux54c:
- make dgux540c KTARGET=$${KTARGET:-$(@)}
-
-#DG/UX 5.4R3.10
-dgux54310:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.4R3...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DDGUX540 -DDGUX54310 -DDIRENT -DHDBUUCP -DSELECT \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- -DNOINADDRX $(KFLAGS)" "LIBS= -lcurses8 -ltermcap" "LNKFLAGS = -s"
-
-#DG/UX 5.4R4.10 - Includes everything.
-dgux54410:
- @echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.10...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDGUX54410 -DDIRENT -DHDBUUCP -DSELECT \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- -DNOINADDRX $(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
-
-#DG/UX 5.4R4.11 - Includes everything.
-dgux54411:
- @echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.11...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDGUX54411 -DDIRENT -DHDBUUCP -DSELECT \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- -DNOINADDRX $(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
-
-#DG/UX 5.4R4.20 - Includes everything.
-dgux54420:
- @echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.20...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDGUX54420 -DDIRENT -DHDBUUCP -DSELECT \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- -DNOINADDRX $(KFLAGS)" \
- "LIBS = -lsocket -lresolv -lnsl -lcurses -ltermcap"
-
-#Silicon Graphics System V R3 with BSD file system (IRIS)
-iris:
- @echo Making C-Kermit $(CKVER) for Silicon Graphics IRIX pre-3.3...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR3 -DLONGFN -DNOLEARN $(KFLAGS) -I/usr/include/bsd" \
- "LIBS = -lbsd"
-
-#Silicon Graphics IRIS System V R3
-irix33:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 3.3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS = -s"
-
-#Silicon Graphics Iris Indigo with IRIX 4.0.0 or 5.0...
-#Strict ANSI C compilation, TCP/IP support included
-irix40:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \
- -DCK_ANSIC -DTCPSOCKET $(KFLAGS) -O -Olimit 1600 -I/usr/include/bsd" \
- "LNKFLAGS = -s"
-
-#As above, but with fullscreen display (curses) and Sun Yellow Pages support.
-#NOTE: IRIX versions prior to 5 run COFF binaries.
-irix40ypc:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0.'
- @echo 'Includes fullscreen file display and Sun Yellow Pages...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DCK_CURSES \
- -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET $(KFLAGS) \
- -O -Olimit 1600 -I/usr/include/bsd" \
- "LIBS = -lcurses -lsun" "LNKFLAGS = -s"
-
-# Silicon Graphics Iris Series 4D/*, IRIX 4.0.x, -O4 ucode optimized.
-# Huge temporary file space needed for ucode optimizer. If you get an error
-# like "ugen: internal error writing to /tmp/ctmca08777: Error 0", define the
-# the TMPDIR environment variable to point to a file system that has more
-# space available, e.g. "setenv TMPDIR /usr/tmp".
-irix40u:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \
- -DCK_ANSIC -DTCPSOCKET $(KFLAGS) -O4 -Olimit 1600" \
- "LNKFLAGS=-O4 -Olimit 1600 -s" "EXT=u"
-
-# As above, with Curses Support added
-irix40uc:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \
- -DCK_ANSIC -DCK_CURSES -DTCPSOCKET $(KFLAGS) -O4 -Olimit 1600" \
- "LNKFLAGS=-O4 -Olimit 1600 -s" "EXT=u" "LIBS= -lcurses -ltermcap"
-
-#Silicon Graphics IRIX 5.x.
-#Yellow Pages and Curses support included.
-#IRIX version 5.x can run COFF or ELF binaries.
-irix51:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 5.x'
- @echo 'Includes fullscreen file display and Yellow Pages...'
- @echo 'Add -mips<n> to CFLAGS specify a particular hardware target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX51 -DSVR4 -DDIRENT -DHDBUUCP -DCK_CURSES -DCK_NEWTERM \
- -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET -DSELECT -DNOGETUSERSHELL \
- -DSYSTIMEH -DDCLPOPEN -DDCLFDOPEN $(KFLAGS) -ansi -O -Olimit 3000" \
- "LIBS = -lcurses" "LNKFLAGS = -s"
-
-#Use this one if irix51 blows up due to lack of swap space or whatever.
-irix51x:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 5.x'
- @echo 'Includes fullscreen file display and Yellow Pages...'
- @echo 'Add -mips<n> to CFLAGS specify a particular hardware target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX51 -DSVR4 -DDIRENT -DHDBUUCP -DCK_CURSES -DCK_NEWTERM \
- -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET -DSELECT -DNOGETUSERSHELL \
- -DSYSTIMEH -DDCLPOPEN -DDCLFDOPEN $(KFLAGS)" \
- "LIBS = -lcurses" "LNKFLAGS = -s"
-
-irix51ypc:
- $(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= $(KFLAGS)"
-
-#IRIX 5.2 adds RTS/CTS
-irix52:
- $(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DIRIX52 -DCK_RTSCTS $(KFLAGS)"
-
-irix53:
- $(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DIRIX52 -DIRIX53 -DCK_RTSCTS $(KFLAGS)"
-
-irix53x:
- $(MAKE) "MAKE=$(MAKE)" irix51x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DIRIX52 -DIRIX53 -DCK_RTSCTS $(KFLAGS)"
-
-#Silicon Graphics IRIX 6.[024] common stuff.
-#Yellow Pages and Curses support included.
-#IRIX version 6.0 and later runs only ELF binaries.
-#Depends on code changes in ckudeb.h that make -DIRIX6x define all
-#lower IRIX6x values and IRIX51.
-irix6x:
- @echo 'Includes fullscreen file display and Yellow Pages...'
- @echo 'Add -mips<n> to specify a particular hardware target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DCK_CURSES -DCK_NEWTERM -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET \
- -DSELECT -DCK_RTSCTS -O $(KFLAGS)" \
- "LIBS = -lcurses" "LNKFLAGS = -s $(LNKFLAGS)"
-
-#Silicon Graphics IRIX 6.0.
-irix60:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.0'
- @$(MAKE) "MAKE=$(MAKE)" \
- "KFLAGS=-DIRIX60 -Olimit 2138 $(KFLAGS)" \
- irix6x KTARGET=$${KTARGET:-$(@)}
-
-#Silicon Graphics IRIX 6.2.
-#Serial speeds > 38400 are available in IRIX 6.2 on O-class machines only.
-#Note: Olimit must be a number > 0.
-irix62:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.2'
- @$(MAKE) "MAKE=$(MAKE)" \
- LNKFLAGS="-Wl,-woff,84" \
- "KFLAGS=-DIRIX62 -Olimit 4700 $(KFLAGS)" \
- irix6x KTARGET=$${KTARGET:-$(@)}
-
-#Silicon Graphics IRIX 6.3.
-irix63:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.3'
- @$(MAKE) "MAKE=$(MAKE)" irix62 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DIRIX63"
-
-#Silicon Graphics IRIX 6.4.
-# -woff,84 to linker stops complaints about no symbols loaded from
-# curses, and -woff 1110 stops complaints about unreachable "break;"
-# statements in ckcpro.c among others.
-# tested on SGI Octane, running IRIX 6.4 up to 115200 bps.
-# -Olimit 0 means infinite.
-irix64:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.4'
- @$(MAKE) "MAKE=$(MAKE)" \
- LNKFLAGS="-Wl,-woff,84" \
- "KFLAGS=-DIRIX64 -DCK_RTSCTS -Olimit 3000 -woff 1110 $(KFLAGS)" \
- irix6x KTARGET=$${KTARGET:-$(@)}
-
-irix64gcc:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.4 gcc'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -DSVR4 -DIRIX64 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC \
- $(KFLAGS) -O" "LIBS= -lcurses -ltermcap -lcrypt"
-
-#Note the new Optimization option syntax for MIPSpro CC 7.2.1.2m.
-irix65:
- @echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5'
- @$(MAKE) "MAKE=$(MAKE)" LNKFLAGS="-Wl,-woff,84" \
- "KFLAGS=-DIRIX65 -DCK_RTSCTS -OPT:Olimit=0 -woff 1110,1552,1174 \
- $(KFLAGS)" \
- irix6x KTARGET=$${KTARGET:-$(@)}
-
-#Dumb down to MIPS-2 if building on R5000 or higher...
-irix65mips2:
- @echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5 MIPS-2'
- @$(MAKE) "MAKE=$(MAKE)" LNKFLAGS="-o32 -mips2 -Wl,-woff,84" \
- "KFLAGS=-DIRIX65 -DCK_RTSCTS -OPT:Olimit=0 -o32 -mips2 \
- -woff 1110,1552,1174 $(KFLAGS)" \
- irix6x KTARGET=$${KTARGET:-$(@)}
-
-irix6x+krb5:
- @echo 'Includes fullscreen file display and Yellow Pages...'
- @echo 'Add -mips<n> to specify a particular hardware target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DCK_CURSES -DCK_NEWTERM -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET\
- -DSELECT -DCK_RTSCTS -O \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DCK_ENCRYPTION -DCK_DES \
- $(K5INC) $(K5INC)/krb5 $(KFLAGS)" \
- "LIBS = -lcurses $(K5LIB) -ldes425 -lkrb5 \
- -lcom_err -lcrypto -lcrypt -lgssapi_krb5" \
- "LNKFLAGS = -s $(LNKFLAGS)"
-
-irix65+krb5:
- @echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5'
- @$(MAKE) "MAKE=$(MAKE)" \
- LNKFLAGS="-Wl,-woff,84" \
- "KFLAGS=-DIRIX65 -DCK_RTSCTS -OPT:Olimit=0 -woff 1110,1552,1174 \
- $(KFLAGS)" \
- irix6x+krb5 KTARGET=$${KTARGET:-$(@)}
-
-#In case they type "make sys5"...
-sys5:
- $(MAKE) "MAKE=$(MAKE)" sys3 KTARGET=$${KTARGET:-$(@)}
-
-#Generic ATT System III or System V (with I&D space)
-sys3:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
- @echo 'or System V R2 or earlier...'
- @echo 'add -DNOMKDIR if mkdir is an undefined symbol.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOUNICODE -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL \
- -DNOINITGROUPS -DNOFTRUNCATE -DNOREALPATH -DNOLEARN $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
-
-#Generic ATT System III or System V (no I&D space)
-sys3nid:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
- @echo 'or System V R2 or earlier, no I&D space...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOREALPATH -DNOUNICODE -DNOSYSLOG -DNOSYMLINK \
- -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS ="
-
-#Generic ATT System III or System V R2 or earlier, "no void":
-#special entry to remove "Illegal pointer combination" warnings.
-sys3nv:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
- @echo 'or System V R2 or earlier...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DATTSV -DNOREALPATH -DNOUNICODE -DNOSYSLOG -DNOGETUSERSHELL \
- -DNOSYMLINK -DNOFTRUNCATE -DNOINITGROUPS -DNOLEARN \
- -Dvoid=int $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
-
-# AT&T 7300 UNIX PC. As of C-Kermit 6.1, many of these entries don't work
-# any more due to "Out of memory" or "Too many defines" errors during
-# compilation, at least not on systems without lots of memory. The sys3upcgc
-# entry works (using gcc) with optimization removed, and might also work
-# with optimization enabled on machines with larger memories.
-
-#AT&T 7300/UNIX PC (3B1) systems, sys3 but special handling for internal modem.
-#Link with the shared library -- the conflict with openi in shared library
-#is solved with -Dopeni=xopeni. Note that the xermit target can't be used
-#for the Unix PC; there is no select().
-sys3upc:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, shared lib...'
- @echo 'If shared lib causes trouble, use make sys3upcold.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DATT7300 -DNOMKDIR -DUSE_MEMCPY -DNOREALPATH -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOREDIRECT -DNOGFTIMER -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \
- "CC2 = ld /lib/crt0s.o /lib/shlib.ifile" "LNKFLAGS = -s"
-
-#AT&T 7300/Unix PC systems, minimum kermit for those with smaller amounts
-#of memory.
-sys3upcm:
- @echo Minimum interactive
- $(MAKE) "MAKE=$(MAKE)" sys3upc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOSPL -DNOFRILLS -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS \
- -DNOSYSLOG -DNOSETKEY -DNOREALPATH"
-
-#AT&T 7300/UNIX PC (3B1) systems, with curses support.
-#Curses and the shared library don't get along, so we don't use the
-#shared library. We need to include CK_NEWTERM to avoid a conflict
-#with curses and buffering on stdout. Merged with submission by
-#Robert Weiner/Programming Plus, rweiner@watsun.cc.columbia.edu.
-#We don't need -Dopeni=xopeni since we're not using the shared library,
-#but we keep it to be consistent with the other entries.
-sys3upcc:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DATT7300 -DNOREALPATH \
- -DCK_CURSES -DCK_NEWTERM -DNOMKDIR -DNOREDIRECT -DNOGFTIMER -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DUSE_MEMCPY -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \
- "LIBS = -lcurses" "LNKFLAGS = -s"
-
-#Like sys3upcc but for AT&T UNIX 3.51m (released as a patch on Fix Disk 2),
-#adds hardware flow control.
-att351m:
- $(MAKE) "MAKE=$(MAKE)" sys3upcc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DCK_RTSCTS -DUNIX351M"
-
-#As above but with gcc.
-att351gm:
- $(MAKE) "MAKE=$(MAKE)" sys3upcgc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DCK_RTSCTS -DUNIX351M"
-
-#AT&T 7300 UNIX PC (3B1), as above, but no newterm().
-sys3upcx:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DATT7300 -DNOREALPATH -DNOUNICODE -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DCK_CURSES -DNOMKDIR -DNOREDIRECT -DNOGFTIMER -DUSE_MEMCPY $(KFLAGS) \
- -Dopeni=xopeni" "LIBS = -lcurses -ltermcap" "LNKFLAGS = -s"
-
-#AT&T 7300/UNIX PC (3B1) systems, with curses and shared library support.
-sys3upcshcc:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, shared lib...'
- @echo 'With curses. Requires shcc.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DATT7300 -DNOMKDIR -DNOREALPATH -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DCK_NEWTERM -DCK_CURSES -DNOREDIRECT -DNOGFTIMER \
- -DUSE_MEMCPY -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \
- "LNKFLAGS = -i -s" "CC = shcc" "CC2 = shcc" "LIBS = -lcurses"
-
-#AT&T 7300/UNIX PC (3B1) systems, as above, no curses, but use gcc.
-sys3upcg:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOUNICODE -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOGFTIMER -DNOMKDIR -DNOREALPATH $(KFLAGS) -Dopeni=xopeni" \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s -shlib"
-
-#AT&T 7300/UNIX PC (3B1) systems, curses and gcc.
-#Optimization omitted -- add it back in if your machine has lots of memory.
-sys3upcgc:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOGFTIMER -DNOUNICODE \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DCK_CURSES -DCK_NEWTERM -DNOMKDIR -DNOREALPATH -DNOLEARN $(KFLAGS)" \
- "CC = gcc" "CC2 = gcc" "LIBS = -lcurses" "LNKFLAGS = -s"
-
-#AT&T 7300/UNIX PC (3B1) systems, special handling for internal modem.
-#No FULLSCREEN file transfer display (curses).
-sys3upcold:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT7300 -DNOMKDIR -DUSE_MEMCPY -DNOUNICODE -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOGFTIMER -DNOREDIRECT -DNOREALPATH $(KFLAGS) -O" "LNKFLAGS = -i"
-
-#As above, but with gcc. mininum features - fits on a 400K UNIX PC floppy
-#after compression with room to spare; add -DNOSHOW or other -DNOxxxx items
-#to reduce size even further.
-sys3upcgm:
- @echo Minimum interactive
- $(MAKE) "MAKE=$(MAKE)" sys3upcg KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOSPL -DNOFRILLS -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS \
- -DNOSETKEY $(KFLAGS)"
-
-#This target is designed to create a version with the most features possible
-#that, after compression, still fits on a 400K UNIX PC floppy.
-sys3upcgfd:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC floppy...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOSPL -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOGFTIMER -DNOREALPATH -Dopeni=xopeni \
- -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS -DNOSETKEY -DNOMKDIR $(KFLAGS)" \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s"
-
-#AT&T 6300 PLUS (warning, -O might make it run out of space).
-#NOTE: Remove -DHDBUUCP if not using Honey DanBer UUCP.
-att6300:
- @echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT6300 -DHDBUUCP -DNOFILEH -DNOREALPATH -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOUNICODE $(KFLAGS) -O -Ml -i" "LNKFLAGS = -i -Ml"
-
-#As above, but with curses support. Debugging disabled to prevent thrashing.
-att6300c:
- @echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT6300 -DHDBUUCP -DNOFILEH -DNOCSETS -DNOREALPATH \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DCK_CURSES -DNODEBUG -DNOUNICODE -DNOLEARN $(KFLAGS) -O -Ml -i" \
- "LNKFLAGS = -i -Ml" "LIBS = -lcurses"
-
-#AT&T 6300 PLUS with no curses, no debugging (about 34K smaller)
-# -Optimization saves about 20K too.
-att6300nd:
- @echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS, no debugging...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT6300 -DHDBUUCP -DNODEBUG -DNOFILEH -DNOREALPATH \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOUNICODE -DNOLEARN $(KFLAGS) -O -i -Ml" "LNKFLAGS = -i -Ml"
-
-#AT&T 3B2 and maybe 3B20-series computers running AT&T UNIX System V R3.
-#This one was actually used to build C-Kermit 7.0 successfully on a 3B2/300.
-att3b2:
- @echo 'Making C-Kermit $(CKVER) for AT&T 3B2'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOREDIRECT -DUSE_MEMCPY \
- -DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOGFTIMER -DNOREALPATH -Dopeni=xopeni -DNOFRILLS -DNOLEARN \
- -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS -DNOSETKEY -DNOMKDIR $(KFLAGS)" \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s"
-
-# The next two are likely not to work as-is.
-
-#AT&T 3B2, 3B20-series computers running AT&T UNIX System V.
-#This is just generic System V with Honey DanBer UUCP, so refer to sys3hdb.
-#Remove -DNONAWS if you can get away with it.
-att3bx:
- $(MAKE) "MAKE=$(MAKE)" sys3hdb KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DNONAWS -DNOTIMEVAL"
-
-# 3Bx with charsets (except Unicode) but no curses.
-att3bx1:
- @echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20'
- @echo 'with Honey DanBer UUCP no curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -DNOREDIRECT \
- -DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \
- -DNOHELP -DNODEBUG -DNOGFTIMER -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOREALPATH -DNOUNICODE -i" \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -i -s"
-
-#AT&T 3B2, 3B20-series computers running AT&T UNIX System V,
-#with fullscreen file transfer display.
-att3bxc:
- @echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20'
- @echo 'with Honey DanBer UUCP and curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DHDBUUCP -DNONAWS -DNOTIMEVAL $(KFLAGS) \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOREALPATH -DCK_CURSES -DCK_NEWTERM -DNOUNICODE -DNOLEARN -i -O" \
- "LNKFLAGS = -i" "LIBS=-lcurses"
-
-#3bx with curses but no charsets
-att3bxc3:
- @echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20'
- @echo 'with Honey DanBer UUCP with curses... no CSETS'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -DNOREDIRECT \
- -DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \
- -DNOHELP -DNODEBUG -DNOGFTIMER -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOREALPATH -DNOCSETS -DCK_CURSES -DCK_NEWTERM -i" \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -i -s" "LIBS = -lcurses"
-
-#Any System V R2 or earlier with Honey DanBer UUCP (same as above)
-sys3hdb:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
- @echo 'or System V R2 or earlier with Honey DanBer UUCP...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DHDBUUCP -DNOREALPATH -DNOUNICODE -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- $(KFLAGS) -i -O" "LNKFLAGS = -i"
-
-#Sperry/UNISYS 5000 UTS V 5.2 (System V R2), Honey DanBer UUCP
-unisys5r2:
- @echo 'Making C-Kermit $(CKVER) for Sperry/UNISYS 5000 UTS V 5.2...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DUNISYS52 -DHDBUUCP -DNOREALPATH -DNOUNICODE \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOLEARN $(KFLAGS) -i -O" "LNKFLAGS = -i"
-
-#In case they say "make sys5hdb" instead of "make sys3hdb"...
-sys5hdb:
- $(MAKE) "MAKE=$(MAKE)" sys3hdb
-
-#Create the common header line for all hpux[5-10]* entries. This extra entry is
-#here because our header message length may differ for each C-Kermit version.
-#Don't use 'fold -s' for HP-UX 5.x - 7.x! This option is there only since
-#HP-UX 8.0!
-hpux-header:
- @HPUX=`uname -r | sed -e 's/^[^1-9]*//' -e 's/\.00$$/.0/'` ; \
- [ "$(MESSAGE0)" ] && MESSAGE1="$(MESSAGE0)" ; \
- Message0='Making C-Kermit $(CKVER) for HP9000 HP-UX' ; \
- Message1=$${MESSAGE1:='without any extra compiler optimization'} ; \
- MessageH="$$Message0 $$HPUX" ; \
- case $$HPUX in \
- [567].*) echo "$$MessageH\n$$Message1" ;; \
- *.*) echo "$$MessageH $${Message1}$(MESSAGE1A)" | fold -s ;; \
- esac | sed -e 's/^ //' -e 's/ *$$//'
-
-# Peter E's updated HP-UX 5.xx entries Oct 2001.
-
-#HP-9000 500 HP-UX 5.xx, no TCP/IP.
-hpux0500:
- @MESSAGE0="no TCP/IP and no compiler optimization";\
- MESSAGE0=$${MESSAGE1:-$$MESSAGE0} \
- $(MAKE) hpux-header
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUX -DHPUX5 -DHPUXPRE65 -DNOREDIRECT -DDCLGETCWD \
- -DNOGETUSERSHELL -DNOGFTIMER -DNOSYSLOG -DNOTOMACROS -DNOLSTAT \
- -DNOSYMLINK -DNOINITGROUPS -DNOUNICODE -DNOLEARN $(KFLAGS)" \
- "LIBS = $(LIBS)" "LNKFLAGS = "
-
-#HP-9000 500 HP-UX 5.21 with Wollongong WIN/TCP 1.2 TCP/IP.
-#Requires /usr/wins/usr/include and /usr/lib/libnet.a from Wollongong.
-#Optimization skipped - takes forever. Really.
-# WARNING: this doesn't work if a file called "hpux0500" is on the disk.
-hpux0500wintcp:
- @MESSAGE1="with WIN/TCP but without any extra compiler optimization" \
- $(MAKE) hpux0500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = -DTCPSOCKET -DHPUX5WINTCP -DINADDRX -DNO_DNS_SRV -DNOMHHOST \
- -DNOHADDRLIST -I/usr/wins/usr/include $(KFLAGS)" \
- "LIBS = /usr/lib/libnet.a"
-
-#HP-UX 6.5, short filenames, no network and no curses support.
-#ckcpro, ckuusr, ckuus3 and others are broken out because they make the
-#optimizer run away. Note that xermit target does not work with this one!
-#If you get compiler warnings like 'Switch table overflow' increase the '...'
-#value in '-Wc,-Nw...'!
-hpux0650:
- @$(MAKE) hpux-header
- @echo 'supporting: NO long filenames, NO network${MESSAGE2}.'
-
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- ckuusr.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) \
- "CFLAGS = -DHPUX -DHPUX6 -DSIG_V -DNOSYSLOG -DNOSELECT -DFNFLOAT \
- -DDCLGETCWD -DNOGETUSERSHELL -DNO_DNS_SRV -DNOLEARN $(KFLAGS) \
- -Wc,-Nw260"
-
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUX -DHPUX6 -DSIG_V -DNOSYSLOG -DNOSELECT -DFNFLOAT \
- -DDCLGETCWD -DNOGETUSERSHELL -DNO_DNS_SRV -DNOLEARN $(KFLAGS) \
- -Wc,-Nw260 $(OFLAGS)" "LNKFLAGS = -s" "LIBS = -lm $(LIBS)"
-
-#Exactly as above, plus curses:
-hpux0650c:
- @MESSAGE2=", but with curses" \
- $(MAKE) hpux0650 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DCK_CURSES $(KFLAGS)" \
- "LIBS= -lcurses"
-
-#Exactly as above, plus curses + network:
-#(doesn't work -- HP-UX 6 lacks the FD_SET macros -- this can be addressed
-
-hpux0650tcpc:
- @MESSAGE2=", but with curses and with tcp/ip" \
- $(MAKE) hpux0650 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DCK_CURSES -DTCPSOCKET -DNOHADDRLIST $(KFLAGS)" \
- "LIBS= -lcurses"
-
-#Exactly as hpux0650 but with compiler optimization:
-hpux0650o:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0650 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= $(KFLAGS)" "OFLAGS = -O"
-
-#Exactly as hpux0650c but with compiler optimization:
-hpux0650oc:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0650c KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= $(KFLAGS)" "OFLAGS = -O"
-
-#Take this as startup entry for all 'none optimized' files under HP-UX 7.x!
-#Make sure we doesn't call it with the '-O' option because this will blow up
-#the compiler!
-hpux0700noopt:
- @case "$(CFLAGS)" in \
- *-O*) echo "Don't use CFLAGS= -O here!" ;; \
- *) $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- ckuusr.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuxla.$(EXT) \
- ckcuni.$(EXT) ckcftp.$(EXT) ckcpro.$(EXT) \
- ;; \
- esac
-
-#HP-UX 7.0, no long filenames, no network support, no curses.
-#If you get compiler warnings like 'Switch table overflow' increase the '...'
-#value in '-Wc,-Nw...'!
-hpux0700sf:
- @$(MAKE) hpux-header
- @echo 'supporting: NO long filenames, NO network, NO curses.'
- $(MAKE) hpux0700noopt KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUX -DHPUX7 -DSIG_V -DNOGETUSERSHELL -DFNFLOAT \
- -DNO_DNS_SRV $(KFLAGS) -Wc,-Nw260"
-
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUX -DHPUX7 -DSIG_V -DNOGETUSERSHELL -DFNFLOAT \
- -DNO_DNS_SRV $(KFLAGS) -Wc,-Nw260 $(OFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lm $(LIBS)"
-
-#Exactly as hpux0700sf but with compiler optimization:
-hpux0700osf:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0700sf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= $(KFLAGS)" "OFLAGS = -O"
-
-#HP-UX 7.0, short filenames, but with tcp/ip and curses.
-#To use this, you must have bought the ARPA Services Product from HP, and you
-#must have /usr/lib/libBSD.a.
-hpux0700sftcpc:
- @$(MAKE) hpux-header
- @echo 'supporting: NO long filenames, \c'
- @echo 'but with networking, curses, HDB uucp...'
- $(MAKE) hpux0700noopt KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V \
- -DCK_REDIR -DCK_RTSCTS -DCK_CURSES -DNOGETUSERSHELL -DFNFLOAT \
- -DNO_DNS_SRV -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" $(KFLAGS) \
- -Wc,-Nw260"
-
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V \
- -DCK_REDIR -DCK_RTSCTS -DCK_CURSES -DNOGETUSERSHELL -DFNFLOAT \
- -DNO_DNS_SRV -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" $(KFLAGS) \
- -Wc,-Nw260 $(OFLAGS)" "LNKFLAGS = -s" "LIBS= -lm -lBSD -lcurses"
-
-#Exactly as above but with compiler optimization:
-hpux0700osftcpc:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0700sftcpc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= $(KFLAGS)" "OFLAGS = -O"
-
-#HP 9000 series 300/800 HP-UX 7.0, long filenames, network support, HDB uucp,
-#but NO curses. See comments in hpux0700sftcpc about TCP/IP support.
-hpux0700lfn:
- @$(MAKE) hpux-header
- @echo 'supporting: long filenames, networking, HDB uucp$(MESSAGE2)...'
- $(MAKE) hpux0700noopt KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V -DFNFLOAT \
- -DNOGETUSERSHELL -DNOSETBUF -DCK_REDIR -DCK_RTSCTS -DLONGFN \
- -DNO_DNS_SRV -DDIRENT -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \
- $(KFLAGS) -Wc,-Nw260"
-
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V -DFNFLOAT \
- -DNOGETUSERSHELL -DNOSETBUF -DCK_REDIR -DCK_RTSCTS -DLONGFN \
- -DNO_DNS_SRV -DDIRENT -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \
- $(KFLAGS) -Wc,-Nw260 \
- $(OFLAGS)" "LNKFLAGS = -s" "LIBS = -lm -lBSD $(LIBS)"
-
-#Exactly as above + curses.
-hpux0700lfnc:
- @MESSAGE2=', curses' \
- $(MAKE) hpux0700lfn KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DCK_CURSES $(KFLAGS)" \
- "LIBS= -lcurses"
-
-#Exactly as above hpux0700lfn but with compiler optimization:
-hpux0700olfn:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0700lfn KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= $(KFLAGS)" "OFLAGS = -O"
-
-#Exactly as above hpux0700lfnc but with compiler optimization:
-hpux0700olfnc:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0700lfnc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= $(KFLAGS)" "OFLAGS = -O"
-
-#HP 9000 Series 300 or 400, HP-UX 8.0, long filenames and TCP/IP support.
-#This one should also work on 700/800, but without PA-specific optimization.
-#In case -DCK_RTSCTS and -DCK_REDIR make trouble, remove them.
-#NOTE: ckcpro.c, ckuusr.c and ckuus3.c blow up the optimizer, so don't optimize
-#them.
-#For HP-UX 8.0 on Motorola CPUs, you might have to reinstall your kernel with
-#maxdsiz >= 0x03000000. But if physical memory is small, that still will not
-#help much.
-hpux0800:
- @$(MAKE) hpux-header
- @MESSAGE3=$${MESSAGE3:='TCP/IP'}; \
- echo "supporting: long filenames, $$MESSAGE3, HDB UUCP$(MESSAGE2)..."
- $(MAKE) -B "CC=$(CC)" "CC2=$(CC2)" KTARGET=$${KTARGET:-$(@)} \
- ckcpro.$(EXT) ckuusr.$(EXT) ckuus3.$(EXT) \
- "CFLAGS = -DCK_REDIR -DHPUXDEBUG -DHPUX -DHPUX8 -DRENAME -DSIG_V \
- -DNOSETBUF -DDIRENT -DCK_RTSCTS -DSTERMIOX -DLONGFN -DTCPSOCKET \
- -DHDBUUCP -DNO_DNS_SRV -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT \
- $(KFLAGS)"
-
- $(MAKE) -B "CC=$(CC)" "CC2=$(CC2)" xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DCK_REDIR -DHPUXDEBUG -DHPUX -DHPUX8 -DRENAME -DSIG_V \
- -DNOSETBUF -DDIRENT -DCK_RTSCTS -DSTERMIOX -DLONGFN -DTCPSOCKET \
- -DHDBUUCP -DNO_DNS_SRV -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT \
- $(KFLAGS) $(OFLAGS)" "LNKFLAGS = -s" "LIBS = -lm -lBSD $(LIBS)"
-
-#Exactly as above hpux0800 + curses.
-hpux0800c:
- @MESSAGE2=', curses' \
- $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) -DCK_CURSES" "LIBS = -lcurses"
-
-#HP 9000 HP-UX 8.0, no TCP/IP because /usr/lib/libBSD.a can't be found,
-#or TCP/IP header files missing.
-hpux0800notcp:
- @MESSAGE3='NO network, NO curses' \
- $(MAKE) "MAKE=$(MAKE)" hpux0800 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) -UTCPSOCKET"
-
-#Now the same as above hpux0800 but with compiler optimization
-hpux0800o:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O"
-
-#Exactly as above hpux0800 + curses and with compiler optimization.
-hpux0800oc:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0800c KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O" "LIBS = -lcurses"
-
-#Exactly as above hpux0800notcp but with compiler optimization
-hpux0800onotcp:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) "MAKE=$(MAKE)" hpux0800notcp KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O"
-
-#HP 9000 Series 700 or 800, HP-UX 8.0, long filenames and TCP/IP support.
-# Like the previous entries, but with PA-RISC-specific optimization.
-hpux0800pa:
- @MESSAGE1="with PA-RISC-specific optimization" \
- $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) +Obb1100"
-
-#As above, but with curses.
-hpux0800pac:
- @MESSAGE1="with PA-RISC-specific optimization" \
- $(MAKE) hpux0800c KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) +Obb1100"
-
-#As above, but compiled with GCC 2.3.3.
-hpux0800pagcc:
- @MESSAGE1='using the gcc compiler' \
- $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \
- "CC=gcc" "CC2=gcc" "KFLAGS= -funsigned-char $(KFLAGS)"
-
-#HP-UX 9.0, 9.01, 9.03, 9.04, 9.05, 9.07, 9.10 ..., + TCP/IP + curses, fully
-#configured. Use this entry with the restricted compiler: no optimization, no
-#ANSI support. If you get unresolved sockets library references at link time,
-#then try adding -lBSD to LIBS, or else remove -DTCPSOCKET to build a version
-#without TCP/IP support.
-hpux0900:
- @MESSAGE1A='. Read hpux0900 entry comments if you have trouble.' \
- $(MAKE) hpux-header
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUXDEBUG -DHPUX9 -DSTERMIOX -DDIRENT -DUTIMEH \
- -DNOSETBUF -DCK_CURSES -DTCPSOCKET -DRENAME -DCK_REDIR -DLONGFN \
- -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lm -lcurses" "CC=$(CC)" "CC2=$(CC2)"
-
-#Like hpux0900, but for the "value-added" compiler on all HP 9000 models.
-#Adds optimization and ANSI compilation:
-# +O2 makes smaller executable (= -O = Level-1 and global optimization)
-# +O3 adds interprocedural global optimization, makes bigger executable.
-# If optimization fails on some modules, you can add:
-# +Obb<n>, +Olimit <n>, or +Onolimit, depending on your cc version,
-# where <n> is a number, e.g. +Obb1200. In other words, if you get optimizer
-# warnings, add (for example) +Obb1200; if you still get optimizer warnings,
-# increase the number. Repeat until warnings go away. If your compiler
-# permits it, use +Onolimit. If optimizer blows up on ckcpro.c, see next entry.
-# Reportedly, on some configurations, such as HP9000/425e or /340, perhaps
-# depending on the amount of main memory, this entry might fail no matter what
-# you do ("Out of Memory", "cc: Fatal error in /lib/c.c1", etc). In that case
-# use "make hpux0900" (no "o").
-hpux0900o:
- @MESSAGE1=$${MESSAGE1:-"with compiler optimization"} \
- $(MAKE) hpux0900 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) -Aa -DCK_ANSIC -D_HPUX_SOURCE +O2"
-
-# For HP-UX 9.0 on Motorola CPUs, optimization of ckcpro.c tends to blow up
-# the compiler. You might have to reinstall your kernel with maxdsiz >=
-# 0x03000000. But if physical memory is small, that still will not help much.
-# In that case, use this entry to skip optimization of ckcpro.c. But for
-# C-Kermit 8.0.208 you need a kernel with maxdsiz >= 0x02000000 to compile an
-# optimized ckcftp.c.
-hpux0900m68ko:
- @MESSAGE1='without compiler optimization for ckcpro.$(EXT) ...' \
- $(MAKE) hpux-header
- $(MAKE) ckuusr.$(EXT) ckuus3.$(EXT) ckcpro.$(EXT) \
- "CFLAGS = -DHPUXDEBUG -DHPUX9 -DSTERMIOX -DDIRENT \
- -DNOSETBUF -DCK_CURSES -DTCPSOCKET -DRENAME -DCK_REDIR -DLONGFN \
- -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT $(KFLAGS)"
- @echo
- @MESSAGE1="with compiler optimization for the rest" \
- $(MAKE) hpux0900 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) -Aa -DCK_ANSIC -D_HPUX_SOURCE +O2"
-
-# Old name for hpux0900m68ko.
-hpux0900mot:
- $(MAKE) hpux0900m68ko KTARGET=$${KTARGET:-$(@)} "KFLAGS = $(KFLAGS)"
-
-#Like hpux0900o but with additional model-700/800-specific optimizations.
-# +ESlit = consolidate strings in read-only memory.
-# +ESfsc = inline millicode calls when comparing pointers.
-hpux0900o700:
- @echo 'If you get optimizer warnings \c'
- @echo 'try "make hpux0900o700 KFLAGS=+Obb1200"'
- @MESSAGE1="with PA-RISC-specific optimizations" \
- $(MAKE) hpux0900o KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) +ESlit +ESsfc"
-
-#HP-UX 9.0, 9.01, 9.03, 9.04, 9.05, 9.07, 9.10 ..., + TCP/IP + curses, fully
-#configured, built with gcc, all models except 800 series.
-#You might need to add the include path for gcc headers, for example:
-# 'KFLAGS=-I/usr/gnu/lib/gcc-lib/hppa1.1-hp-hpux/2.4.5/include/'
-hpux0900gcc:
- @MESSAGE1='using the gcc compiler' \
- $(MAKE) hpux0900 KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "KFLAGS = $(KFLAGS) -DCK_ANSIC -funsigned-char -O2"
-
-#HP-9000 HP-UX 10.0 + TCP/IP + curses, fully configured.
-#Use with restricted (bundled) compiler: no optimization, no ANSI support.
-#libcurses needed for fullscreen file xfer display in HP-UX 10.00 and 10.01.
-#libHcurses (NOT libcurses!) for fullscreen display, to work around fatal bugs
-#in HP-UX 10.10 and 10.20 curses. Maybe we could use lcurses for 10.30, since
-#the 10.10 curses problem is supposedly fixed in 10.30.
-# +DA1.0 = Generate PA-RISC 1.0 code that runs on both 700 and 800 models.
-# +DA1.1 = Generate PA-RISC 1.1 code that runs on both 700 and 800 models.
-# Note that HP-UX 10.20 and upwards not support PA-RISC 1.0 systems.
-# And that as of Dec 2001, 11.00 and 11.11 are PA-only and 11.20 is IA64-only.
-# Later 11.2x releases are expected to be for both. Architecture can be
-# determined with the model command, at least in 10.20 and later...
-#For future releases, we need to include +DA1.1 for PA builds, so that a
-#binary built on PA 2.0 will still work on PA 1.1 machines, whereas +DA1.1
-#must NOT be included for IA64 builds.
-#
-hpux1000:
- @$(MAKE) hpux-header
- @LIBS='-lHcurses' ; \
- AFLAGS='+DA1.1' ; \
- case `uname -r` in \
- [AB].10.0*) KFLAGS='-DHPUX1000 $(KFLAGS)' ; \
- AFLAGS='+DA1.0' ; LIBS='-lcurses' ;; \
- [AB].10.1*) KFLAGS='-DHPUX1010 -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].10.2*) KFLAGS='-DHPUX1020 -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].10.3*) KFLAGS='-DHPUX1030 -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].10.?*) KFLAGS='-DHPUX10XX -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].11.0*) KFLAGS='-DHPUX1100 -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].11.1*) KFLAGS='-DHPUX1100 -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].11.?*) KFLAGS='-DHPUX1100 -D__HP_CURSES $(KFLAGS)' ; \
- AFLAGS='' ; LIBS='-lcurses' ;; \
- esac ; \
- OFLAGS=$${OFLAGS:-$$AFLAGS} ; \
- $(MAKE) "SHELL=/usr/bin/sh" xermit KTARGET=$${KTARGET:-$(@)} \
- "CC=$(CC)" "CC2=$(CC2)" \
- "CFLAGS = -DHPUX10 -DDIRENT -DSTERMIOX -DCK_DSYSINI -DHDBUUCP \
- -DCK_CURSES -DCK_WREFRESH -DTCPSOCKET -DCK_REDIR -DRENAME -DFNFLOAT \
- $$KFLAGS $$OFLAGS" \
- "LNKFLAGS=-s $(LNKFLAGS)" "LIBS = -lm $$LIBS $(KLIBS)"
-
-# This is a kludge, copying hpux0900gcc and adapting hpux1000
-# (add CC and CC2, drop the A1.[0||1])
-# Builds w/ no compiler warnings but minimally tested.
-#
-hpux1000gcc:
- @MESSAGE1="using the gcc compiler $(MESSAGE1)" \
- $(MAKE) hpux1000 KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "KFLAGS = $(KFLAGS)" OFLAGS=" -DCK_ANSIC -funsigned-char -O2"
-
-# Trusted HP-UX 10
-# echo KFLAGS=$(KFLAGS) YTARGET YTARGET=$(YTARGET) $(XTARGET) ;
-hpux1000t:
- @case "$(KTARGET)" in \
- *+openssl) \
- KENTRY=hpux1000o+openssl ;; \
- *gcc) \
- KENTRY=hpux1000gcc ;; \
- *o+) KENTRY=hpux1000o+ ;; \
- *o) KENTRY=hpux1000o ;; \
- *) KENTRY=hpux1000 ;; \
- esac ; \
- MESSAGE1="and support for 'Trusted HP-UX'" \
- $(MAKE) $$KENTRY KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= $(KFLAGS) -DHPUX10_TRUSTED" "KLIBS=-lsec"
-
-hpux1000to:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
-
-hpux1000to+:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
-
-hpux1000tgcc:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
-
-hpux1000to+openssl:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
-
-hpux1000tgcc+openssl:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
-
-#HP-9000 HP-UX 10.00 and higher with ANSI prototyping and optimization.
-#PA-RISC only, no Motorola or other hardware is support in HP-UX 10.00++.
-#The unbundled optional compiler is required.
-#Your path should start with /opt/ansic/bin.
-# -Wl,-Fw = Remove stack unwind table (info used by debuggers).
-# +O2 makes a smaller executable (= -O = Level-1 and global optimization).
-# +O3 adds interprocedural global optimization, makes a bigger executable.
-# +Onolimit allows all modules to be optimized, no matter how complex. But:
-# (a) +Onolimit does not seem to always be there in HP-UX 10.00, and:
-# (b) some modules might take hours on low-memory and/or slow systems.
-# The following are PA-RISC-specific optimizations:
-# +ESlit = Consolidate strings in read-only memory.
-# +ESfsc = Inline millicode calls when comparing pointers.
-# You might need to configure your kernel for a maxdsiz of 0x0B000000 (176MB)
-# or greater to prevent the optimizer from running out of space.
-# December 2001: +ESlit +ESsfc removed because not supported on IA64.
-# Somebody who cares can use 'model' to see whether it's PA-RISC or IA64
-# and include the architecture-specific optimization flags. Also note:
-# +DA1.1 is PA-only. If this is included in in HP-UX 11.00 or later,
-# then +DS2.0 should be included too (but don't use +DS2.0 without +DA1.1,
-# or else the binary won't run on older PA hardware).
-hpux1000o:
- @case `uname -m` in \
- ia64) ;; \
- *) MFLAGS='+ESlit +ESsfc' ;; \
- esac ; \
- MESSAGE1="with PA-RISC-specific optimizations $(MESSAGE1)" \
- $(MAKE) "SHELL=/usr/bin/sh" "PATH=/opt/ansic/bin:$$PATH" hpux1000 \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = $(KFLAGS) \
- -Aa -D_HPUX_SOURCE -DCK_ANSIC -DUTIMEH \
- +O2 -Wl,-Fw $$MFLAGS"
-
-#Like hpux1000o but with "+Onolimit".
-#On 700 series set kernel parameter maxdsiz >= 0x0D000000 (=208MB).
-#Takes a long time.
-hpux1000o+:
- @MESSAGE1="and +Onolimit $(MESSAGE1)" KTARGET=$${KTARGET:-$(@)} \
- $(MAKE) hpux1000o \
- "KFLAGS = $(KFLAGS) +Onolimit"
-
-#HP-UX 10.xx + 11.xx with optimizing ANSI compiler and OpenSSL.
-#Define SSLLIB and SSLINC appropriately for your OpenSSL installation.
-#Do overwrite the default SSLLIB and SSLINC settings you can also use the
-#command-line variable KSSLLIB and KSSLINC like:
-#make hpux1000o+openssl KSSLLIB=-L/opt/openssl/lib KSSLINC=-I/...
-#Ditto for the Zlib location.
-#This entry works for C-Kermit 8.0.206 on HP-UX 10.20 + 11.11
-#with OpenSSL 0.9.6 + 0.9.7
-#NOTE: an ANSI C compiler is required for the SSL interface. If you don't
-#have the HP Optimizing ANSI compiler, see the hpux1000gcc+openssl target
-#below.
-hpux1000o+openssl:
- @case "$(KTARGET)" in \
- *gcc+*) KENTRY=hpux1000gcc ;; \
- *) KENTRY=hpux1000o ;; \
- esac ; \
- SSLINC=$${KSSLINC:-$(SSLINC)}; \
- SSLLIB=$${KSSLLIB:-$(SSLLIB)}; \
- MESSAGE1="and with OpenSSL $(MESSAGE1)" \
- $(MAKE) $$KENTRY KTARGET=$${KTARGET:-$(@)} \
- KFLAGS="-DCK_AUTHENTICATION -DCK_SSL -DOPENSSL_097 -DZLIB \
- $$SSLINC $(KFLAGS)" \
- KLIBS="$(KLIBS) \
- $$SSLLIB -lssl -lcrypto \
- -L/opt/zlib/lib -lz \
- "
-
-#HP-UX 10.00 or higher with OpenSSL 0.9.7. Compiled with gcc.
-#From Chris Chaney, NEC America Inc. His instructions:
-# (1) Install gcc version 3.2.3 & binutils version 2.13.2
-# (used binary depot from http://hpux.cs.utah.edu/)
-# (2) Install gcc make version 3.80 from http://hpux.cs.utah.edu/
-#
-# or: gcc 2.9.2000-12-1 from "Linux to hp-ux 11.0/11i porting kit version 1.0
-# (2CD)" free from: http://www.software.hp.com
-#
-# (3) Install openSSL version 0.9.7b from http://www.software.hp.com
-# (4) Install flex version 2.5.4 from http://hpux.cs.utah.edu/
-# (5) Install gmp version 3.1.1 from http://hpux.cs.utah.edu/
-#
-#Note from Peter Eichhorn, assyst Munich. It works also without gcc make!
-hpux1000gcc+openssl:
- $(MAKE) hpux1000o+openssl KTARGET=$${KTARGET:-$(@)}
-
-# Same for HP-UX 11
-hpux1100o+openssl:
- $(MAKE) hpux1000o+openssl KTARGET=$${KTARGET:-$(@)}
-
-hpux1100gcc+openssl:
- $(MAKE) hpux1000gcc+openssl KTARGET=$${KTARGET:-$(@)}
-
-# HP-UX 11
-hpux1100:
- $(MAKE) hpux1000 KTARGET=$${KTARGET:-$(@)}
-
-hpux1100o:
- $(MAKE) hpux1000o KTARGET=$${KTARGET:-$(@)}
-
-hpux1100o+:
- $(MAKE) hpux1000o+ KTARGET=$${KTARGET:-$(@)}
-
-hpux1100gcc:
- $(MAKE) hpux1000gcc KTARGET=$${KTARGET:-$(@)}
-
-# Trusted HP-UX 11
-hpux1100t:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
-
-hpux1100to:
- $(MAKE) hpux1000to KTARGET=$${KTARGET:-$(@)}
-
-hpux1100to+:
- $(MAKE) hpux1000to+ KTARGET=$${KTARGET:-$(@)}
-
-hpux1100tgcc:
- $(MAKE) hpux1000tgcc KTARGET=$${KTARGET:-$(@)}
-
-hpux1100to+openssl:
- $(MAKE) hpux1000to+openssl KTARGET=$${KTARGET:-$(@)}
-
-hpux1100tgcc+openssl:
- $(MAKE) hpux1000tgcc+openssl KTARGET=$${KTARGET:-$(@)}
-
-#Regulus on CIE Systems 680/20
-cie:
- @echo 'Making C-Kermit $(CKVER) for CIE Systems 680/20 Regulus...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOFILEH -DCIE -DNOLEARN $(KFLAGS) -O" "LNKFLAGS ="
-
-# Linux 1.2 or later with gcc, dynamic libraries, ncurses, TCP/IP.
-#
-# If your Linux system has curses rather than ncurses, use the linuxc
-# entry, or if that doesn't work, linuxnc.
-#
-# The Kermit "large memory model" is used by default to configure big packet
-# and script buffers, etc. For small-memory or limited-resource systems,
-# "make linux KFLAGS=-DNOBIGBUF".
-#
-# -DLINUXFSSTND (Linux File System Standard 1.2) gives UUCP lockfile /var/lock
-# with string pid. Remove this to get /usr/spool/uucp with int pid, used in
-# very early Linux versions. FSSTND 1.2 also says that the PID string in the
-# UUCP lock file has leading spaces. This is a change from FSSTND 1.0, which
-# used leading zeros. Add -DFSSTND10 to support FSSTND 1.0 instead of 1.2.
-# I hope subsequent editions of the file-system standard did not change these
-# again.
-#
-# Add -DOLINUXHISPEED (Old Linux High Speed support) to turn on an ugly kludge
-# in Linux 1.0 and earlier to support speeds of 57600 and 115200. Extremely
-# old Linux systems (pre-0.99pl15) will not support this. If OLINUXHISPEED is
-# not defined, then only the standard POSIX termios methods of setting the port
-# speed will be used, and in this case speeds can be as high as 460800 in most
-# modern Linux versions.
-#
-# -DCK_POSIX_SIG (POSIX signal handling) is good for Linux releases back to at
-# least 0.99.14; if it causes trouble for you, remove it from the CFLAGS.
-#
-# -pipe removes the need for temp files - remove it if it causes trouble.
-#
-# -funsigned-char makes all characters unsigned, as they should have been
-# in the first place.
-#
-# Add -DCK_DSYSINI if you want a shared system-wide init file.
-#
-# See ckubwr.txt about -DNOCOTFMC. In fact, you really should read the
-# entire Linux section of ckubwr.txt.
-#
-# The "linuxa" entry can be referenced directly on LIBC systems, but not
-# GLIBC, where -lcrypt is required. The "make linux" entry should normally
-# be used for all builds on all Linux distributions unless you have special
-# requirements, in which case keep reading. CK_NEWTERM added after 7.0B04
-# due to new complaints about ncurses changing buffering of tty.
-
-linuxa:
- @echo 'Making C-Kermit $(CKVER) for Linux 1.2 or later...'
- @echo 'IMPORTANT: Read the comments in the linux section of the'
- @echo 'makefile if you have trouble.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -DLINUX -pipe -funsigned-char -DFNFLOAT -DCK_POSIX_SIG \
- -DCK_NEWTERM -DTCPSOCKET -DLINUXFSSTND -DNOCOTFMC -DPOSIX \
- -DUSE_STRERROR $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" "LIBS = $(LIBS) -lm"
-
-# As above but with profiling
-linuxp:
- $(MAKE) linuxa KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS) -pg" \
- "LIBS=-pg -lcrypt -lresolv"
-
-#New primary Linux entry for C-Kermit 8.0, replacing big nested
-#if-then-else construction full of repeated clauses with a simpler scheme
-#for automatically detecting:
-# . Old versus new pty handling (new == glibc 2.1++)
-# . Presence or absence of librypt.a and <crypt.h>
-# . Presence or absence of libresolv.a
-#Unlike the previous scheme, this one is easily extended to include more tests.
-#Note: The HAVE_PTMX test was previously "if test -c /dev/ptmx" but this was
-#not sufficient for Debian 2.1, because although it had /dev/ptmx, it did not
-#have grantpt(), unlockpt(), or ptsname(), so has been changed to look for a
-#grantpt() prototype in the header files. Warning: uses a temporary file in
-#the current directory. Modified in 8.0.206 to allow for libraries that
-#contain .so's but no .a's, e.g. Mandrake 9.0.
-#HAVE_BAUDBOY added in 8.0.210 for Red Hat -- it's like AIX ttylock().
-linux:
- @if test \
- `grep grantpt /usr/include/*.h /usr/include/sys/*.h | wc -l` -gt 0; \
- then if test -c /dev/ptmx; then HAVE_PTMX='-DHAVE_PTMX'; \
- else HAVE_PTMX=''; fi; fi ; \
- if test -f /usr/include/baudboy.h ; \
- then HAVE_BAUDBOY='-DHAVE_BAUDBOY' ; \
- else HAVE_BAUDBOY='' ; fi ; \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DCK_NCURSES -I/usr/include/ncurses \
- $$HAVE_PTMX $$HAVE_BAUDBOY \
- `if test -f /usr/include/crypt.h; then echo -DHAVE_CRYPT_H; fi` \
- $(KFLAGS)" \
- "LIBS=-lncurses \
- `if test -f /usr/lib/libresolv.a || test -f /usr/lib/libresolv.so; \
- then echo -lresolv; fi` \
- `if test -f /usr/lib/libcrypt.a || test -f /usr/lib/libcrypt.so; \
- then echo -lcrypt; fi`" \
- linuxa
-
-# As above but for Linux systems that have no <sys/select.h>.
-linuxns:
- $(MAKE) linux KTARGET=$${KTARGET:-$(@)} KFLAGS=-DNO_SYS_SELECT_H
-
-# As above, but forces use of curses rather than ncurses.
-# Add -ltermcap to LIBS if necessary.
-# Also watch out for libcurses and/or libtermcap having been moved.
-# In that case you might need something like:
-# "LIBS = -L/usr/lib/curses -lcurses -L/usr/lib/termcap -ltermcap"
-
-linuxc:
- @if test \
- `grep grantpt /usr/include/*.h /usr/include/sys/*.h | wc -l` -gt 0; \
- then if test -c /dev/ptmx; then HAVE_PTMX='-DHAVE_PTMX'; \
- else HAVE_PTMX=''; fi; fi ; \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DCK_CURSES $$HAVE_PTMX \
- `if test -f /usr/lib/libcrypt.a; then echo -DHAVE_CRYPTH; fi` \
- $(KFLAGS)" \
- "LIBS=-lcurses \
- `if test -f /usr/lib/libresolv.a; then echo -lresolv; fi` \
- `if test -f /usr/lib/libcrypt.a; then echo -lcrypt; fi`" \
- linuxa
-
-# As above but with with no curses support, for example because you installed
-# the developer tools but did not install (n)curses.
-linuxnc:
- @if test \
- `grep grantpt /usr/include/*.h /usr/include/sys/*.h | wc -l` -gt 0; \
- then if test -c /dev/ptmx; then HAVE_PTMX='-DHAVE_PTMX'; \
- else HAVE_PTMX=''; fi; fi ; \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= $$HAVE_PTMX \
- `if test -f /usr/lib/libcrypt.a; then echo -DHAVE_CRYPTH; fi` \
- $(KFLAGS)" "LIBS= \
- `if test -f /usr/lib/libresolv.a; then echo -lresolv; fi` \
- `if test -f /usr/lib/libcrypt.a; then echo -lcrypt; fi`" \
- linuxa
-
-#Sharp Zaurus SL-5500 - Linux based
-zsl5500:
- @echo 'Making C-Kermit $(CKVER) for Sharp Zaurus SL-5500...'
- @touch ckcpro.c
- @touch wart
- $(MAKE) linuxnc KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DZSL5500" \
- "CC = gcc" "CC2 = gcc"
-
-# A minimum-size version for Linux that does only scripting and
-# serial communication -- no networks, no file transfer.
-linuxso:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -DLINUX -pipe -funsigned-char -DPOSIX -DCK_POSIX_SIG \
- -DLINUXFSSTND -DNOCOTFMC -DNOXFER -DNODEBUG -DNOCSETS -DNOHELP \
- -DNONET -DMINIDIAL -DNOSCRIPT -DNOIKSD -DNOPUSH $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" "LIBS = "
-
-#Mklinux DR3 has horrible bug in <utmpbits.h> - see ckufio.c.
-mklinux:
- $(MAKE) KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DUTMPBUG" \
- "LIBS=-lcrypt -lresolv" linuxa
-
-#LinuxPPC 1999
-linuxppc:
- @echo 'Making C-Kermit $(CKVER) for LinuxPPC 1999...'
- @if test -f /usr/lib/libcrypt.a; then \
- if test -f /usr/lib/libresolv.a; then \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(NCURSES_CPP) -DHAVE_CRYPT_H \
- -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
- "LIBS=-lncurses -lresolv -lcrypt" linuxa ; \
- else \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(NCURSES_CPP) -DHAVE_CRYPT_H \
- -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
- "LIBS=-lncurses -lcrypt" linuxa ; \
- fi \
- else \
- if test -f /usr/lib/libresolv.a; then \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(NCURSES_CPP) \
- -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
- "LIBS=-lncurses -lresolv" linuxa ; \
- else \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(NCURSES_CPP) \
- -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
- "LIBS=-lncurses" linuxa ; \
- fi \
- fi
-
-
-# The remaining Linux entries are for special or customized builds. They
-# have not been generalized like the ones above. Ideally, we should allow
-# for every combination of libc vs glibc, gcc vs egcs, curses vs ncurses,
-# Kerberos IV vs Kerberos V vs SRP (in any combination), and so on --
-# volunteers welcome.
-
-# If you get "Internal compiler error xxx, output pipe has been closed",
-# try removing -pipe.
-
-# Like "make linux" but built with egcs rather than gcc.
-linuxegcs:
- @echo 'Making C-Kermit $(CKVER) for Linux 1.2 or later with egcs...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = egcs" "CC2 = egcs" \
- "CFLAGS = -O -DLINUX -pipe -funsigned-char \
- -DPOSIX -DCK_POSIX_SIG -DCK_NCURSES -DNOCOTFMC \
- -DTCPSOCKET -DLINUXFSSTND $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lncurses -lcrypt -lresolv"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.1 (no K4 compatibility).
-linux+krb5:
- @echo 'Making C-Kermit $(CKVER) for Linux on Intel with Kerberos...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 \
- -DCK_ENCRYPTION -DCK_DES -DCK_CURSES -DCK_POSIX_SIG \
- -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H $(K5INC) $(K5INC)/krb5 \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) -lncurses -ltermcap -ldes425 -lkrb5 \
- -lcom_err -lk5crypto -lgssapi_krb5 -lcrypt -lresolv"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.1 with K4 compatibility.
-#
-# Requires the Kerberos 1.2.1 be compiled with KRB4 compatibility.
-linux+krb5+krb4:
- @echo 'Making C-Kermit $(CKVER) for Linux on Intel with Kerberos...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_DES -DCK_CURSES -DCK_POSIX_SIG \
- -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H $(K5INC) $(K5INC)/krb5 \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) -lncurses -ltermcap -lkrb4 -ldes425 -lkrb5 \
- -lcom_err -lk5crypto -lcrypt -lgssapi_krb5 -lresolv"
-
-# Linux on Intel PC with SRP 1.7.4 using GNU MP, Krypto, and Eric Young's
-# DES library. Remove the -DCK_DES, -DLIBDES and -ldes if you do not have
-# Eric Young's# libdes.a installed.
-#
-linux+srp+gmp:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) \
- -lncurses -ltermcap -lsrp -lgmp -ldes -lkrypto -lcrypt -lresolv"
-
-linux+srp+gmp+no-des:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP ...'
- $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) \
- -lncurses -ltermcap -lsrp -lgmp -lkrypto -lcrypt -lresolv"
-
-linux+srp+gmp-export:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) srpmit-export KTARGET=$${KTARGET:-$(@)} \
- "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DFNFLOAT \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) \
- -lncurses -ltermcap -lsrp -lgmp -lkrypto -lcrypt -lm -lresolv"
-
-linux+srp+gmp+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_PAM -DFNFLOAT $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) -lncurses -ltermcap -lsrp -lgmp -ldes -lkrypto \
- -lcrypt -lpam -ldl -lm -lresolv"
-
-#Linux on Intel PC with SRP 1.7.4 built with OpenSSL for Big Number Math
-#and Cryptographic functionality.
-#
-linux+srp:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(SRPINC) $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(SSLLIB) \
- -lncurses -ltermcap -lsrp -lkrypto -lcrypto -lcrypt -lresolv"
-
-linux+srp+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_PAM -DFNFLOAT $(SRPINC) $(SSLINC) $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(SSLLIB) -lncurses -ltermcap -lsrp -lkrypto \
- -lcrypto -lcrypt -lpam -ldl -lm -lresolv"
-
-linux+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with Shadow+PAM...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_SHADOW -DCK_PAM -DFNFLOAT \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = -lncurses -ltermcap -lcrypt -lpam -ldl -lm -lresolv"
-
-#Linux configured for SSL/TLS.
-#Remove -ltermcap if it causes trouble e.g. in Debian 2.2.
-#If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+openssl:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SSL/TLS...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SSL \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DFNFLOAT $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS= $(SSLLIB) \
- -lncurses -ltermcap -lssl -lcrypto -lm -lresolv -lcrypt"
-
-#Linux configured for SSL/TLS and Shadow Passwords
-#Remove -ltermcap if it causes trouble e.g. in Debian 2.2.
-#If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+openssl+shadow:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SSL/TLS...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SSL \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DFNFLOAT -DCK_SHADOW $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS= $(SSLLIB) \
- -lncurses -ltermcap -lssl -lcrypto -lm -lresolv -lcrypt"
-
-#Linux configured for SSL/TLS, ZLIB, PAM and Shadow Passwords
-#Remove -ltermcap if it causes trouble e.g. in Debian 2.2.
-#If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+openssl+zlib+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SSL/TLS...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DZLIB \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DFNFLOAT -DCK_SHADOW $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS= $(SSLLIB) \
- -lncurses -ltermcap -lssl -lcrypto -lm -lresolv -lcrypt -lz -lpam -ldl"
-
-#Linux on Intel PC with SRP and SSL/TLS.
-#
-# libsrp.a should be build with OpenSSL
-# Requires the Kerberos 1.2.2 or higher to be compiled with KRB4 compatibility.
-#Remove -ltermcap if it causes trouble e.g. in Debian 2.2.
-#If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+srp+openssl:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(SRPINC) $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(SSLLIB) \
- -lncurses -ltermcap -lsrp -lssl -lkrypto -lcrypto \
- -lcrypt -lresolv"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2 and SRP.
-#
-# libsrp.a should be build with GNU MP (libgmp.a)
-# instead of AT&T CryptoLib (libcrypt.a) due to naming conflicts with
-# standard distribution Linux libraries.
-# Requires the Kerberos 1.2.2 or higher to be compiled with KRB4 compatibility.
-linux+krb5+krb4+srp:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB54+SRP...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SRPINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SRPLIB) \
- -lncurses -ltermcap -lsrp -lgmp -lgssapi_krb5 -lkrypto \
- -ldes -lkrb4 -ldes425 -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP and SSL/TLS.
-#
-# libsrp.a should be build with OpenSSL
-# Requires the Kerberos 1.2.2 or higher to be compiled with KRB4 compatibility.
-# Requires OpenSSL 0.9.6a or higher
-#If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+krb5+krb4+srp+openssl:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SRPLIB) $(SSLLIB) \
- -lncurses -ltermcap -lsrp \
- -lkrb4 -lssl -lkrypto -lcrypto \
- -lkrb5 -lcom_err -lk5crypto -lgssapi_krb5 -lcrypt -lresolv"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SSL/TLS.
-#
-# libsrp.a should be build with OpenSSL
-# Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
-#If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+krb5+krb4+openssl:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lncurses -ltermcap \
- -lkrb4 -lssl -lcrypto -lkrb5 -lcom_err \
- -lk5crypto -lgssapi_krb5 -lcrypt -lresolv"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.1, SSL/TLS.
-#
-# libsrp.a should be build with OpenSSL
-# Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
-# If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+krb5+krb4+openssl+shadow:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_SHADOW \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lncurses -ltermcap \
- -lkrb4 -lssl -lcrypto -lkrb5 -lcom_err \
- -lk5crypto -lgssapi_krb5 -lcrypt -lresolv"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2, SSL/TLS.
-#
-# libsrp.a should be build with OpenSSL
-# Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
-# If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+krb5+krb4+openssl+zlib+shadow:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 -DZLIB \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_SHADOW \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lncurses -ltermcap \
- -lkrb4 -lssl -lcrypto -lkrb5 -lcom_err \
- -lk5crypto -lgssapi_krb5 -lcrypt -lresolv -lz"
-
-linux+krb5+krb4+srp-export:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) xermit-export KTARGET=$${KTARGET:-$(@)} \
- "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SRPINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) \
- -lncurses -ltermcap -lsrp -lgmp -lkrb4 -ldes425 -lkrb5 -lgssapi_krb5 \
- -lcom_err -lk5crypto -lkrypto -lcrypt -lresolv"
-
-linux+krb5+krb4+srp+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_PAM $(K5INC) $(K5INC)/krb5 $(SRPINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) \
- -lncurses -ltermcap -lsrp -lgmp -ldes -lkrb4 -ldes425 -lkrb5 \
- -lcom_err -lk5crypto -lgssapi_krb5 -lkrypto -lcrypt -lpam -ldl \
- -lresolv"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP and SSL/TLS.
-# and PAM.
-#
-# libsrp.a should be build with OpenSSL
-# Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
-# If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+krb5+krb4+srp+openssl+pam-debug:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit-debug KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -w -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG $(K5INC) $(K5INC)/krb5 \
- $(SRPINC) $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \
- -lncurses -ltermcap -lsrp -lkrb4 -lssl -lkrypto -lcrypto \
- -lkrb5 -lcom_err -lk5crypto -lgssapi_krb5 -lcrypt -lresolv -lpam -ldl"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.1, SRP and SSL/TLS.
-# and PAM.
-#
-# libsrp.a should be build with OpenSSL
-# Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
-# If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+krb5+krb4+srp+openssl+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap -lsrp \
- -lkrb4 -lssl -lkrypto -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP, OpenSSL
-# with ZLIB and PAM
-#
-# libsrp.a should be build with OpenSSL
-# Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
-# If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+krb5+krb4+srp+openssl+zlib+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap -lsrp \
- -lkrb4 -lssl -lkrypto -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP, OpenSSL
-# with ZLIB, Shadow Passwords, and PAM
-#
-# libsrp.a should be build with OpenSSL
-# Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
-# If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+krb5+krb4+srp+openssl+zlib+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_SHADOW $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap -lsrp -lkrypto \
- -lkrb4 -lssl -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, OpenSSL
-# with Shadow Passwords, PAM
-#
-# Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
-linux+krb5+krb4+openssl+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL,...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_SHADOW $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap \
- -lkrb4 -lssl -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, OpenSSL
-# with ZLIB, Shadow Passwords, PAM
-#
-# libsrp.a should be build with OpenSSL
-# Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
-# If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+krb5+krb4+openssl+zlib+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_SHADOW $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap \
- -lkrb4 -lssl -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz"
-
-#Red Hat 9 - full install includes Kerberos 5 (4 compat), PAM, SSL.
-#Also works around bug in curses in which terminal goes dead after
-#returning from file-transfer display. Assumes OpenSSL 0.9.7 or later.
-redhat9:
- @echo "Building SECURE Kermit for Red Hat 9.0..."
- $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH90 -DOPENSSL_097 $(KFLAGS)"
-
-#Ditto plus SRP (which is not normally included with RH Linux).
-redhat9+srp:
- @echo "Building SECURE Kermit for Red Hat 9.0..."
- $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH90 -DOPENSSL_097 $(KFLAGS)"
-
-#Red Hat Linux 8.0 - full install includes Kerberos 5 (4 compat), PAM, SSL.
-#Also works around bug in curses in which terminal goes dead after
-#returning from file-transfer display.
-redhat80:
- @echo "Building SECURE Kermit for Red Hat 8.0..."
- $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH80 $(KFLAGS)"
-
-redhat80+srp:
- @echo "Building SECURE Kermit for Red Hat 8.0..."
- $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH80 $(KFLAGS)"
-
-#Red Hat Linux 7.3 - full install includes Kerberos 5 (4 compat), PAM, SSL.
-#Also works around bug in curses in which terminal goes dead after
-#returning from file-transfer display.
-redhat73:
- @echo "Building SECURE Kermit for Red Hat 7.3..."
- $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH73 $(KFLAGS)"
-
-redhat73+srp:
- @echo "Building SECURE Kermit for Red Hat 7.3..."
- $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH73 $(KFLAGS)"
-
-#Red Hat Linux 7.2 - full install includes Kerberos 5 (4 compat), PAM, SSL.
-#Also works around bug in curses in which terminal goes dead after
-#returning from file-transfer display.
-redhat72:
- @echo "Building SECURE Kermit for Red Hat 7.2..."
- $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH72 $(KFLAGS)"
-
-redhat72+srp:
- @echo "Building SECURE Kermit for Red Hat 7.2..."
- $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH72 $(KFLAGS)"
-
-#Red Hat Linux 7.1 - full install includes Kerberos 5 (4 compat), PAM, SSL.
-#Also works around bug in curses in which terminal goes dead after
-#returning from file-transfer display.
-redhat71:
- @echo "Building SECURE Kermit for Red Hat 7.1..."
- $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH71 $(KFLAGS)"
-
-redhat71+srp:
- @echo "Building SECURE Kermit for Red Hat 7.1..."
- $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH71 $(KFLAGS)"
-
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, OpenSSL
-# with ZLIB and PAM and Shadow passwords
-linux+krb5+openssl+zlib+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB5,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DCK_SHADOW \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap -lssl -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz"
-
-linuxnotcp:
- $(MAKE) linux KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DNONET $(KFLAGS)"
-
-# "make linuxnotcp" with lcc (see http://www.cs.princeton.edu/software/lcc)
-# lcc does not understand various gcc extensions:
-# "__inline__" -- can be eliminated by adding "-D__inline__="
-# "__asm__ and "long long" -- in header files, should be surrounded by
-# "#ifndef(__STRICT_ANSI__)"/"#endif"
-# however, TCP requires some __asm__ functions, so cannot be compiled
-linuxnotcp-lcc:
- @echo 'Making C-Kermit $(CKVER) for Linux with lcc ...'
- @echo 'Read comments in makefile for additional information.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = lcc" "CC2 = lcc" \
- "CFLAGS = -DLINUX -DPOSIX -DCK_CURSES -DCK_POSIX_SIG \
- -UTCPSOCKET -DLINUXFSSTND -DNOLEARN $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap"
-
-# Linux 0.99.14 thru 1.0 with gcc, dynamic libraries, curses, TCP/IP.
-# For Linux 1.2 or later, use "make linux" (above).
-#
-# -DLINUXFSSTND (Linux File System Standard) gives UUCP lockfile /var/lock with
-# string pid. Remove this and get /usr/spool/uucp with int pid, which was used
-# in early Linux versions.
-#
-# If you get compiler errors regarding <linux/serial.h>, add -DNOHISPEED.
-#
-# -DCK_POSIX_SIG (POSIX signal handling) is good for Linux releases back to at
-# least 0.99.14; if it causes trouble for you, just remove it.
-#
-# -DCK_CURSES: Here we link with the regular curses library. But you should
-# be using ncurses. Internally, the ckuusx.c module includes <curses.h>, but
-# this really should be <ncurses.h>. Thus if you have the new curses
-# material, you should either install it with the standard names, or else
-# create symbolic links from the standard names to the new ones. If you get
-# compile-time errors complaining about data definitions in termcap.h, it
-# means you have new kernel material mixed with older libc header files. To
-# fix, add "#include <termios.h>" to the <termcap.h> file. Or if all this is
-# too confusing, create a new makefile entry based on this one, but with
-# -DCK_CURSES removed from CFLAGS and the entire LIBS= clause removed.
-#
-# But wait, there's more. On most Linux systems, -ltermcap must be included
-# in LIBS. But on others, the linker complains that libtermcap can't be
-# found. In that case, try removing -ltermcap from LIBS=.
-#
-# But wait, there's more. The format of the PID string in the UUCP lockfile
-# changed between Linux FSSTND 1.0 and 1.2. In the earlier standard, it had
-# leading zeros; in the second, it has leading spaces. By default this entry
-# uses the newer standard. To force the older one, add -DFSSTND10.
-#
-# "The nice thing about the Linux standard is there are so many to choose from"
-#
-# NOTE: Remove -DBIGBUFOK for small-memory or limited-resource systems.
-linux10:
- @echo 'Making C-Kermit $(CKVER) for Linux 1.0 or earlier...'
- @echo 'IMPORTANT: Read the comments in the linux section of the'
- @echo 'makefile if you get compilation or link errors.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -DPOSIX -DCK_CURSES -DCK_POSIX_SIG -DLINUX \
- -DTCPSOCKET -DLINUXFSSTND -DOLINUXHISPEED -DNOLEARN $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap"
-
-#This version was used for Linux prior to C-Kermit 6.0.192.
-#Now the "Linux File System Standard" is considered standard, ditto TCP/IP.
-linuxold:
- @echo 'Making C-Kermit $(CKVER) for Linux...'
- @echo 'For FSSTND-recommended UUCP lockfiles, use:'
- @echo ' make linux "KFLAGS=-DLINUXFSSTND".'
- @echo 'Read comments in makefile for additional options.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -DLINUX -DPOSIX -DCK_CURSES -DCK_POSIX_SIG -DNOLEARN \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap"
-
-# LynxOS 2.2 with GCC compiler, TCP/IP and fullscreen display.
-# Probably also works with Lynx 2.1, and maybe even Lynx 2.0.
-# -X means use termios serial drivers rather than BSD4.3-style sgtty drivers.
-# If you have trouble with this, try "make bsd KFLAGS=-DNOFDZERO".
-lynx:
- @echo 'Making C-Kermit $(CKVER) for LynxOS 2.2 with TCP/IP'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -O -DPOSIX -DDIRENT -DSETREUID -DCK_CURSES -DTCPSOCKET \
- -DCK_ANSIC -DLYNXOS -DNOLEARN" "LNKFLAGS = -X" "LIBS = -lcurses -lbsd"
-
-lynx22:
- $(MAKE) lynx KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
-
-# LynxOS 2.1 with GCC compiler 1.40 and TCP/IP.
-lynx21:
- @echo 'Making C-Kermit $(CKVER) for LynxOS 2.1 with TCP/IP'
- $(MAKE) kermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -O -DSETREUID -DTCPSOCKET -DCK_ANSIC -DBSD4 -DLYNXOS" \
- "LIBS = -lbsd"
-
-#SCO Xenix 2.2.1 for IBM PC, XT, PS2/30, or other 8088 or 8086 machine
-#Should this not work, try some of the tricks from sco286.
-#NOTE: -DRENAME is omitted for early SCO Xenix releases because it didn't
-#exist, or its semantics were different from the later POSIX-compliant
-#version of rename().
-sco86:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/86...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DNOFILEH -DNOIKSD -DNOUNICODE -DNOLEARN \
- $(KFLAGS) -Dunix -F 3000 -i -M0me" \
- "LNKFLAGS = -F 3000 -i -s -M0me" "LIBS = -lx"
-
-#SCO Xenix/286 2.2.1, e.g. for IBM PC/AT, PS/2 Model 50, etc.
-#Reportedly, this "make" can fail simply because of the size of this
-#makefile. If that happens, use "makeL", or edit out some of the
-#other entries. No debugging or character-set translation.
-sco286:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/286...'
- @echo 'If make fails, try using makeL.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -xenix -s -O -LARGE -DXENIX -DNOFILEH -Dunix -DRDCHK -DNAP \
- -DNOIKSD -DNODEBUG -DNOTLOG -DNOCSETS -DNOLEARN \
- $(KFLAGS) -F 3000 -i -M2let16" \
- "LIBS = -lx" "LNKFLAGS = -xenix -s -O -LARGE -F 3000 -i -M2let16"
-
-#SCO Xenix/286 2.2.1, e.g. for IBM PC/AT, PS/2 Model 50, etc.
-#As above, but with HDBUUCP (This one might need fixing -- see sco286).
-sco286hdb:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/286 with HDB UUCP...'
- @echo 'If make fails, try using makeL.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -s -O -LARGE -DXENIX -DNOFILEH -Dunix -DRDCHK -DNAP \
- -DHDBUUCP -DNOIKSD -DNOUNICODE -DNOLEARN \
- $(KFLAGS) -F 3000 -i -M2let32" \
- "LIBS = -lx" "LNKFLAGS = -s -O -LARGE -F 3000 -i -M2let32"
-
-#SCO Xenix/386 2.2.2 and 2.2.3
-sco386:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.2.2...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DNOFILEH -DNOIKSD -DNOREDIRECT -DNOLEARN \
- -Dunix -DRDCHK -DNAP -DNOUNICODE $(KFLAGS) -Otcl -M3e" \
- "LNKFLAGS = -s" "LIBS = -lx"
-
-#SCO XENIX/386 2.2.3 with Excelan TCP/IP + curses.
-# NOTE: This one might need some work in C-Kermit 6.0.
-# You might need to include /usr/include/sys/types.h
-# containing "typedef char *caddr_t;". Then at least it compiles.
-sco386netc:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.2.3 + Excelan TCP'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -I/usr/include/exos -DXENIX -DCK_CURSES -DNOUNICODE \
- -Dunix -DRDCHK -DNAP -DTCPSOCKET -DEXCELAN -DNOJC -DNOMKDIR -DNOFILEH \
- -DNOLEARN -DNOREDIRECT -DNOIKSD -DNO_DNS_SRV $(KFLAGS) -Otcl -M3e" \
- "LNKFLAGS = -s" "LIBS = -lc -lx -lsocket -lcurses -ltermcap"
-
-#SCO XENIX/386 2.3.3 with gcc 1.37 or later...
-sco386gcc:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.3.3, gcc...'
- @echo 'Add -D_NO_PROTOTYPE if you have trouble with Xenix header files'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -O -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \
- -DNOJC -DNODEBUG -DNOUNICODE -DNOLEARN $(KFLAGS) \
- -traditional -fpcc-struct-return -fstrength-reduce \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
- -DM_SYSIII -DM_SYSV -DM_WORDSWAP -DM_XENIX -DNOIKSD -DNOREDIRECT \
- -DPWID_T=int " "LNKFLAGS = -s" "LIBS = -lx"
-
-#As above, but with curses...
-sco386gccc:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.3.3, gcc...'
- @echo 'Add -D_NO_PROTOTYPE if you have trouble with Xenix header files'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -O -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \
- -DNOJC -DNODEBUG -DCK_CURSES -DNOUNICODE -DNOLEARN $(KFLAGS) \
- -traditional -fpcc-struct-return -fstrength-reduce \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DNOREDIRECT \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
- -DM_SYSIII -DM_SYSV -DM_WORDSWAP -DM_XENIX -DNOIKSD \
- -DPWID_T=int " "LNKFLAGS = -s" "LIBS = -lx -lcurses -ltermlib"
-
-#SCO UNIX (and ODT) entries...
-#
-#NOTE: All SCO UNIX entry LIBS should have "-lc_s -lc -lx" IN THAT ORDER (if
-#shared C library is desired), or else "-lc -lx" IN THAT ORDER. Use shared C
-#libraries to save memory, but then don't expect to run the resulting binary
-#on a different machine. When using -lc_s, you must also use -lc, because the
-#shared C library does not contain all of libc.a. And in all cases, -lc must
-#ALWAYS precede -lx.
-#
-#ANOTHER NOTE: -DRENAME is included in all SCO UNIX entries. Remove it if it
-#causes trouble. No harm is done by removing it (see ckuins.txt).
-#
-#AND ANOTHER: In theory, it should be possible to run SCO UNIX binaries on
-#SCO Xenix 2.3 and later. In practice, this might not work because of the
-#libraries, etc. Also, don't add the -link -z switch (which is supposed to
-#root out references to null pointers) because it makes UNIX binaries core
-#dump when they are run under Xenix.
-
-#NOTE: -Otcl removed and replaced by -O, since -Otcl produced incorrect code.
-#SCO UNIX/386 3.2.0, 3.2.1, and SCO Xenix 2.3.x
-sco3r2:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2.0 or 3.2.1 ...'
- @echo 'Warning: If make blows up, edit the makefile to join'
- @echo 'the following three continued lines into one line.'
- @echo 'Also, remove -DRENAME if _rename unresolved at link time.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DNOLEARN \
- -DRENAME -DNOIKSD -DNOJC $(KFLAGS) -O" \
- "LNKFLAGS = -s" "LIBS = -lc -lx"
-
-#SCO UNIX/386 3.2.0 and SCO Xenix 2.3.x with Excelan TCP/IP support.
-#In case of compilation or runtime problems, try adding
-#"-DUID_T=int -DGID_T=int" to the CFLAGS. If that doesn't work, try
-#"-DUID_T=uid_t -DGID_T=gid_t".
-sco3r2net:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Excelan...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -I/usr/include/exos -DXENIX -DSVR3 -DNOFILEH -DNOLEARN \
- -DHDBUUCP -DRDCHK -DNAP -DRENAME -DTCPSOCKET -DEXCELAN -DNOJC \
- -DNOIKSD -DNOREDIRECT $(KFLAGS) -O" \
- "LNKFLAGS = -s" "LIBS = -lc -lx -lsocket"
-
-#SCO UNIX/386 3.2.0 and SCO Xenix 2.3.x with Excelan TCP/IP support.
-#As above, with curses added.
-sco3r2netc:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Excelan / curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -I/usr/include/exos -DXENIX -DSVR3 -DNOFILEH -DNOLEARN \
- -DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET -DEXCELAN -DNOJC $(KFLAGS) \
- -DRENAME -DCK_CURSES -DNOREDIRECT -DNOIKSD -O" "LNKFLAGS = -s" \
- "LIBS = -lc -lx -lsocket -lcurses -ltermcap"
-
-#SCO UNIX 3.2.x or SCO Xenix 2.3.x with Racal InterLan TCP/IP support
-# Extra compile flags for other version of Racal InterLan TCP/IP:
-# Xenix286/NP621-286, use -Ml -DPARAMH -DINTERLAN -Di286 -DSYSV
-# Xenix386/NP621-386, use -DPARAMH -DINTERLAN -Di386 -DSYSV
-# ISC386ix/NP622I, use -DSYSV -Di386
-# SCO Unix3.2/NP622S, use -DSYSV -Di386 -DSCO_UNIX
-# AT&T SVR3.2/NP622A, use -DSYSV -Di386 -DATT
-sco3r2netri:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Racal InterLan...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -I/usr/include/interlan -DXENIX -DNOFILEH -DHDBUUCP \
- -DSVR3 -DRDCHK -DNAP -DTCPSOCKET -DPARAMH -DINTERLAN -Di386 -DSYSV \
- -DRENAME -DNOREDIRECT -DNOIKSD -DNOJC -DNOLEARN $(KFLAGS) -Otcl -M3e" \
- "LNKFLAGS = -s" "LIBS = -lc -lx -ltcp"
-
-# SCO XENIX/386 2.3.3 SysV with SCO TCP/IP
-# System V STREAMS TCP developed by Lachman Associates Inc and
-# Convergent Technologies.
-# -DRENAME removed since some reports indicate it is not supported
-# (whereas others say it is.)
-sco3r2lai:
- @echo 'Making C-Kermit $(CKVER) for SCO XENIX/386 2.3.3 + TCP/IP...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DLAI_TCP -Di386 -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK \
- -DNAP -DTCPSOCKET -DPWID_T=int -DNOREDIRECT -DNOIKSD -DNOLEARN \
- $(KFLAGS) -Otcl -i -M3e" \
- "LNKFLAGS = -i -s" "LIBS = -lc -lx -lsocket"
-
-sco3r2laic:
- @echo 'Making C-Kermit $(CKVER) for SCO XENIX/386 2.3.3 + TCP/IP...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DLAI_TCP -Di386 -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK \
- -DNAP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES -DM_TERMINFO -DNOLEARN \
- -DPWID_T=int -DNOREDIRECT -DNOIKSD $(KFLAGS) -Otcl -i -M3e" \
- "LNKFLAGS = -i -s" "LIBS = -ltinfo -lc -lx -lsocket"
-
-#SCO UNIX/386 3.2v2 (POSIX job control), shared libraries.
-sco3r22:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 ...'
- make wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \
- -DNAP -DRENAME -DPID_T=pid_t -DPWID_T=int -DDIRENT -DNOIKSD \
- -DNOREDIRECT $(KFLAGS) -O" \
- "LNKFLAGS = -s" "LIBS = -lc_s -lc -lx"
-
-#SCO UNIX/386 3.2v2, POSIX job control, fullscreen file transfer display,
-#dynamic memory allocation, shared C library
-sco3r22c:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 ...'
- @echo 'Warning: If make blows up, edit the makefile to join'
- @echo 'the following four continued lines into one line.'
- make wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DNOLEARN \
- -DCK_CURSES -DDIRENT -DRENAME -DNOREDIRECT -DNOIKSD \
- -DPID_T=pid_t -DPWID_T=int $(KFLAGS) -O" \
- "LNKFLAGS = -s" "LIBS = -lcurses -lc_s -lc -lx"
-
-#SCO UNIX/386 3.2v2 with gcc 1.40 or later (POSIX job control)
-sco3r22gcc:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2, gcc'
- @echo 'Warning: If make blows up, edit the makefile to join'
- @echo 'the following seven continued lines into one line.'
- make wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" \
- "CFLAGS= -O -DPOSIX -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \
- -DNOLEARN -DRENAME -traditional -fpcc-struct-return -fstrength-reduce \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
- -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
- -DPID_T=pid_t -DPWID_T=int -DNOREDIRECT -DNOIKSD $(KFLAGS) " \
- "LNKFLAGS = -s" "LIBS = -lc_s -lc -lx"
-
-#SCO UNIX/386 3.2v2 (ODT 1.1) (POSIX job control) with SCO TCP/IP, shared libs
-#Requires SCO TCP/IP or ODT development system for telnet.h, etc.
-sco3r22net:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2.2 + TCP/IP...'
- @echo 'Warning: If make blows up, edit the makefile to join'
- @echo 'the following three continued lines into one line.'
- make xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET \
- -DRENAME -DPID_T=pid_t -DPWID_T=int -DDIRENT -DNOREDIRECT -DNOIKSD \
- $(KFLAGS) -O" "LNKFLAGS = -s" "LIBS = -lsocket -lc_s -lc -lx"
-
-#As above, but with curses for fullscreen file transfer display.
-#Requires SCO TCP/IP or ODT development system for telnet.h, etc.
-sco3r22netc:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 + TCP/IP...'
- @echo 'Warning: If make blows up, edit the makefile to join'
- @echo 'the following three continued lines into one line.'
- make xermit KTARGET=$${KTARGET:-$(@)} "CFLAGS= \
- -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET -DRENAME \
- -DCK_CURSES -DDIRENT -DNOIKSD -DNOREDIRECT \
- -DPID_T=pid_t -DPWID_T=int -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx"
-
-#SCO XENIX 2.3.4, no curses, no TCP/IP, no IKSD.
-#This one built and tested in C-Kermit 7.0.
-#lcfp is C library floating-point support.
-#Use -M3 to generate 32-bit i386 code instead of 16-bit segmented i286 code.
-#Use -Me to enable MS nonstandard keywords in system headers.
-#Use -W2 or W3 to increase the warning level.
-sco234:
- @echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \
- -DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \
- -DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DSCO234 -DDCLGETCWD $(KFLAGS) \
- -Otcl" "LNKFLAGS = -s" "LIBS = -lcfp -lc -lx"
-
-#SCO XENIX 2.3.4, no TCP/IP, no IKSD, but with curses.
-# Built and tested in C-Kermit 7.0.
-# Note: XENIX 2.3.4 does not have newterm() so no point in adding -DCK_NEWTERM.
-sco234c:
- @echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4 + curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \
- -DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \
- -DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DCK_CURSES -DSCO234 \
- -DDCLGETCWD $(KFLAGS) -Otcl" \
- "LNKFLAGS = -s" "LIBS = -lcfp -lc -ltinfo -lx"
-
-#SCO XENIX 2.3.4 with SCO TCP/IP and curses, no IKSD.
-# Built and tested in C-Kermit 7.0. TCP/IP works and curses works.
-# Previous versions of this target included -lmalloc, but this caused "error:
-# " _calloc : symbol defined more than once" at link time so I removed it.
-# Results are likely to vary depending on exactly which version of the SDK
-# and TCP/IP SDK you have.
-sco234netc:
- @echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4 + TCP + curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \
- -DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \
- -DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DCK_CURSES -DSCO234 \
- -DDCLGETCWD -DTCPSOCKET -DNO_DNS_SRV $(KFLAGS) -Otcl" \
- "LNKFLAGS = -s" "LIBS = -ltinfo -lsocket -lcfp -lc -lx"
-
-# SCO 3.2v4.x targets...
-
-# NOTE: Add -DDCLPOPEN and/or -DDCLFDOPEN to anySCO 3.2v4.x non-gcc entries
-# that complain about fdopen() or popen() at compile time. They compile OK
-# without these flags as of July 1999. However, the gcc entries seem to
-# need them, at least for gcc 2.7.2.2.
-
-# NOTE 2: To enable IKSD support, add:
-# -DCK_LOGIN -DNOGETUSERSHELL -DNOINITGROUPS
-# to CFLAGS (not tested).
-
-#SCO UNIX/386 3.2v4 (POSIX job control), curses, ANSI C compilation,
-#<dirent.h> (EAFS) file system. Remove -lmalloc if it causes trouble. It was
-#put there to avoid core dumps caused by regular libc.a malloc. Add -J to make
-#all chars unsigned. This version uses select() for CONNECT and also has
-#high-precision timers and so might not work on non-TCP systems, in which case
-#sco32v4ns should be used instead.
-# If you get _ftime redefinition_ complaint, try adding -DODT30 to CFLAGS.
-sco32v4:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
- make xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DCK_SCO32V4 -DNOFILEH -DHDBUUCP -DCK_CURSES -DM_TERMINFO \
- -DNOANSI -DSELECT -DNOIKSD -DDCLGETCWD -NOLSTAT \
- -DNOLINKBITS -DDCLGETCWD $(KFLAGS) -O" \
- "LNKFLAGS = -s" "LIBS = -lcurses -lmalloc -lsocket -lc_s -lc -lx"
-
-# As above, but with no dependence on sockets library or select().
-sco32v4ns:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
- @echo 'No select() and no sockets library.'
- make wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DCK_SCO32V4 -DNOFILEH -DHDBUUCP -DCK_CURSES -DM_TERMINFO \
- -DNOANSI -DNOIKSD -DNOGFTIMER -DCK_POLL -DNAP -DDCLGETCWD -DNOLSTAT \
- -DNOLINKBITS -DDCLGETCWD -DNOLEARN -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lcurses -lmalloc -lc_s -lc -lx"
-
-#SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation,
-#<dirent.h> (EAFS) file system. With DIRENT, -lc must come before -lx.
-#Reportedly it's OK to add -DCK_REDIR and -DCK_WREFRESH, and to remove -lc_s.
-#Requires SCO TCP/IP development system or ODT for telnet.h, etc.
-#See sco32v4 above for additional comments.
-#NOTE: No more room for -Dxxx -- 25 seems to be the limit. Move some to
-#ckcdeb.h or somewhere...
-sco32v4net:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
- @echo 'If you get _ftime redefinition_ complaint,'
- @echo 'use make sco-odt30.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNOFILEH -DHDBUUCP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES \
- -DNAP -DCK_WREFRESH -DNOLINKBITS -D_IBCS2 -DSELECT -DNOLSTAT \
- -DDCLGETCWD -DCK_SCO32V4 -DNOIKSD -O \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS) -s" \
- "LIBS = $(LIBS) -lcurses -lsocket -lmalloc -lsocket -lc_s -lc -lx"
-
-#SCO UNIX/386 3.2v4 with gcc 1.40 or later, POSIX job control.
-#Also see comments in sco32r4 entry.
-sco32v4gcc:
- make xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" \
- "CFLAGS= -O -DNOFILEH -DHDBUUCP -DNOANSI -DCK_CURSES -DM_TERMINFO \
- -traditional -fpcc-struct-return -fstrength-reduce -funsigned-char \
- -D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLINKBITS \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DSELECT -DNOLSTAT \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 -DDCLGETCWD \
- -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
- -DDCLPOPEN -DDCLFDOPEN $(KFLAGS) " \
- "LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx"
-
-#SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation,
-#Requires SCO TCP/IP or ODT development system for telnet.h, etc.
-#<dirent.h> (EAFS) file system. With DIRENT, -lc must come before -lx.
-#gcc 1.40 or later. Also see comments in sco32r4 entry.
-sco32v4netgcc:
- make xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2=gcc" \
- "CFLAGS= -O2 -DNOFILEH -DHDBUUCP -DSELECT -DNOLSTAT \
- -DNOANSI -DTCPSOCKET -DCK_CURSES -DM_TERMINFO \
- -D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLINKBITS \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DDCLGETCWD \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
- -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
- -DDCLPOPEN -DDCLFDOPEN $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx"
-
-#As above but with bgcc BOUNDS CHECKING (for developers only). -lcheck has
-#bounds-checking replacements for malloc, memcpy, bcopy, etc, so must come
-#before -lsocket and -lc.
-sco32v4netbgcc:
- make xermit KTARGET=$${KTARGET:-$(@)} \
- "CC = bgcc -pipe -m386" "CC2=bgcc -pipe -m386" \
- "CFLAGS= -O1 -g -DNOFILEH -DHDBUUCP -DSELECT \
- -DNOANSI -DTCPSOCKET -DCK_CURSES -DM_TERMINFO \
- -D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLSTAT \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DNOLINKBITS \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 -DDCLGETCWD \
- -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
- -DDCLPOPEN -DDCLFDOPEN $(KFLAGS) " \
- "LNKFLAGS = -g" "LIBS = -lcurses -lcheck -lsocket -lx"
-
-sco32v4netnd:
- @echo sco32v4net with no debug
- $(MAKE) "MAKE=$(MAKE)" sco32v4net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DNODEBUG -DNOTLOG" "LIBS=$(LIBS)"
-
-sco3r2netnd:
- @echo sco32v4netnd built for SCO XENIX 2.3 under SCO UNIX...
- @echo requires copying /lib/386/Slibc.a to /lib/386/Slibc_s.a and
- @echo getting /lib/386/Slibsocket.a from a XENIX devkit.
- @echo WARNING: poll/CK_POLL supported only on XENIX 2.3.4
- echo For earlier XENIX systems, replace CK_POLL with RDCHK.
- $(MAKE) "MAKE=$(MAKE)" sco32v4netnd KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -x2.3 -DNORENAME -DNOSYMLINK" \
- "LNKFLAGS = $(LNKFLAGS) -x2.3" \
- "LIBS=-ldir -lcfp $(LIBS)"
-
-#SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation,
-#<dirent.h> (EAFS) file system. With DIRENT, -lc must come before -lx.
-#Reportedly it's OK to add -DCK_REDIR and -DCK_WREFRESH, and to remove -lc_s.
-#Requires SCO TCP/IP development system or ODT for telnet.h, etc.
-#See sco32v4 above for additional comments.
-# Note: "xermit" means use the select() version of the CONNECT module.
-sco32v4netx:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
- @echo 'If you get _ftime redefinition_ complaint,'
- @echo 'use make sco-odt30.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNOFILEH -DHDBUUCP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES -DNAP \
- -DCK_WREFRESH -DNOLINKBITS -D_IBCS2 -DSELECT -DDCLGETCWD \
- -DCK_SCO32V4 -DNOIKSD -DNOLSTAT -O $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS) -s" \
- "LIBS = $(LIBS) -lcurses -lsocket -lmalloc -lsocket -lc_s -lc -lx"
-
-sco32v4netndx:
- @echo sco32v4netx with no debug
- $(MAKE) "MAKE=$(MAKE)" sco32v4netx KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DNODEBUG -DNOTLOG" "LIBS=$(LIBS)"
-
-sco3r2netndx:
- @echo sco32v4netndx built for SCO XENIX 2.3 under SCO UNIX...
- @echo requires copying /lib/386/Slibc.a to /lib/386/Slibc_s.a and
- @echo getting /lib/386/Slibsocket.a from a XENIX devkit.
- @echo WARNING: poll/CK_POLL supported only on XENIX 2.3.4
- echo For earlier XENIX systems, replace CK_POLL with RDCHK.
- $(MAKE) "MAKE=$(MAKE)" sco32v4netndx KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -x2.3 -DNORENAME -DNOSYMLINK" \
- "LNKFLAGS = $(LNKFLAGS) -x2.3" \
- "LIBS=-ldir -lcfp $(LIBS)"
-
-sco-odt30:
- @echo SCO ODT 3.0
- $(MAKE) "MAKE=$(MAKE)" sco32v4net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DODT30"
-
-#SCO OpenServer 5.0 (SCO UNIX 3.2v5.0) with SCO development tools, no TCP/IP.
-#SCO OSR5 is much more like standard System V than previous SCO releases.
-#The SCO development tools include TCP/IP, so this target is only for creating
-#artificially limited versions of kermit required by site policy rather than
-#the operating system. NOSYSLOG is included because syslog() requires the
-#sockets library.
-sco32v500:
- @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DNOSYSLOG \
- $(KFLAGS)" \
- "LIBS=-lcurses $(LIBS)" "LNKFLAGS=$(LNKFLAGS)"
-
-sco32v5:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v500
-
-
-#SCO OpenServer 5.0 with networking, SCO development tools.
-#Networking libraries are now provided with the OS.
-sco32v500net:
- @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET \
- -DNO_DNS_SRV $(KFLAGS)" \
- "LIBS=-lcurses -lsocket $(LIBS)" "LNKFLAGS=$(LNKFLAGS)"
-
-sco32v5net:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v500net
-
-#SCO OpenServer 5.0 with networking and OpenSSL, SCO development tools.
-#Networking libraries are now provided with the OS.
-sco32v500net+ssl:
- @echo Making C-Kermit $(CKVER) for SCO OSR5 with OpenSSL...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET \
- -DNO_DNS_SRV -DCK_AUTHENTICATION -DCK_SSL -DCK_TRIGGER \
- $(SSLINC) $(SSLLIB) $(KFLAGS)" \
- "LIBS=$(SSLLIB) -lcurses -lsocket -lssl -lcrypto $(LIBS)" \
- "LNKFLAGS=$(LNKFLAGS)"
-
-#SCO OpenServer 5.0 with gcc, no networking.
-#Note: NOSYSLOG required for non-net entries because it requires <socket.h>
-sco32v500gcc:
- @echo Using gcc...
- $(MAKE) "MAKE=$(MAKE)" sco32v500CC=gcc CC2=gcc \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS= $(KFLAGS)"
-
-#SCO OpenServer 5.0 with networking, gcc.
-sco32v500netgcc:
- @echo TCP/IP networking added - using gcc...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net CC=gcc CC2=gcc \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
-
-#SCO OpenServer 5.0 with networking, gcc, elf.
-sco32v500netgccelf:
- @echo TCP/IP networking added - using gcc, dynamic elf library
- $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=-O3 -belf" "LNKFLAGS=-belf"
-
-sco32v502:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR502 $(KFLAGS)"
-
-#SCO OpenServer 5.0.2 with networking, SCO development tools.
-sco32v502net:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-b elf -DSCO_OSR502 $(KFLAGS)"
-
-#SCO OpenServer 5.0.4 (SCO UNIX 3.2v5.0.4) with SCO development tools.
-#Like 5.0, but adds high serial speeds. First POSIX-based SCO version.
-#Note: the -O flag is deliberately omitted for /bin/cc (= /usr/ccs/bin/cc).
-sco32v504:
- @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5.0.4...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
- -DSCO_OSR504 -b elf -DPOSIX \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DNOSYSLOG $(KFLAGS)" \
- "LIBS=-lcurses $(LIBS)" "LNKFLAGS=$(LNKFLAGS)"
-
-#SCO OpenServer 5.0.4 with gcc, no networking.
-sco32v504gcc:
- @echo Using gcc...
- $(MAKE) "MAKE=$(MAKE)" sco32v504 "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS= $(KFLAGS)"
-
-#SCO OpenServer 5.0.4 with networking.
-#SCO development tools (/bin/cc = /usr/ccs/bin/cc).
-#Optimization deliberately suppressed.
-sco32v504net:
- @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5.0.4...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET \
- -b elf -DSCO_OSR504 -DPOSIX -DNO_DNS_SRV $(KFLAGS)" \
- "LIBS=-lcurses -lsocket $(LIBS)" "LNKFLAGS=$(LNKFLAGS)"
-
-#SCO OpenServer 5.0.4 with networking, gcc.
-sco32v504netgcc:
- @echo TCP/IP networking added - using gcc...
- @echo If gcc crashes on ckwart.c then build it by hand:
- @echo " gcc -o wart -DCK_SCOV5 ckwart.c"
- $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DSCO_OSR504 -DPOSIX $(KFLAGS)"
-
-#SCO OpenServer 5.0.4 with networking, gcc, elf.
-sco32v504netgccelf:
- @echo TCP/IP networking added - using gcc, dynamic elf library
- $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc"
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR504 -DPOSIX -O3 -belf $(KFLAGS)" \
- LNKFLAGS="-belf"
-
-#SCO OpenServer 5.0.5 (SCO UNIX 3.2v5.0.5) with SCO /bin/cc.
-#Like 5.0, but adds high serial speeds. First POSIX-based SCO version.
-#You might have to add "LIBS=-ltinfo" (some do, some don't).
-sco32v505:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DNOSHADOW -b elf -DPOSIX $(KFLAGS)"
-
-#SCO OpenServer 5.0.5 (SCO UNIX 3.2v5.0.5) with SCO UDK.
-#This one can't see the high serial speeds and anything to do with modem
-#signals doesn't work because UKD cc has its own alternative universe of
-#header files.
-sco32v505udk:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DDCLTIMEVAL -DNOSHADOW -b elf -DPOSIX $(KFLAGS)"
-
-#SCO OpenServer 5.0.5 with networking, SCO /bin/cc.
-#See comments with sco32v505 targets.
-sco32v505net:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DNOSHADOW -b elf -DPOSIX $(KFLAGS)"
-
-#SCO OpenServer 5.0.5 with networking and OpenSSL, SCO /bin/cc.
-#See comments with sco32v505 targets.
-sco32v505net+ssl:
- @echo TCP/IP networking and OpenSSL added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net+ssl KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DNOSHADOW -b elf -DPOSIX $(KFLAGS) " \
-
-#SCO OpenServer 5.0.5 with networking, SCO UDK.
-#See comments with above sco32v505 targets.
-sco32v505udknet:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DDCLTIMEVAL -DNOSHADOW -b elf -DPOSIX $(KFLAGS)"
-
-#SCO OpenServer 5.0.5 with gcc, no networking.
-sco32v505gcc:
- @echo Using gcc...
- $(MAKE) "MAKE=$(MAKE)" sco32v500 "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DPOSIX -funsigned-char $(KFLAGS)"
-
-#SCO OpenServer 5.0.5 with gcc, no networking, no shadow passwords.
-sco32v505xgcc:
- @echo Using gcc...
- $(MAKE) "MAKE=$(MAKE)" sco32v500 "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DNOSHADOW -DPOSIX -funsigned-char $(KFLAGS)"
-
-#SCO OpenServer 5.0.5 with networking, gcc.
-sco32v505netgcc:
- @echo TCP/IP networking added - using gcc...
- @echo If gcc crashes on ckwart.c then build it by hand:
- @echo " gcc -o wart -DCK_SCOV5 ckwart.c"
- $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DNOSHADOW -DPOSIX -funsigned-char $(KFLAGS)"
-
-#egcs is just like gcc but generates ELF by default.
-#Or you can include -melf (not -belf) to force it.
-sco32v505netegcs:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v505netgcc \
- KTARGET=$${KTARGET:-$(@)}
-
-#SCO OpenServer 5.0.5 with networking, gcc, elf.
-sco32v505netgccelf:
- @echo TCP/IP networking added - using gcc, dynamic elf library
- $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \
- "KFLAGS=-DSCO_OSR505 -DPOSIX -funsigned-char -O3 -belf $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)} LNKFLAGS="-belf"
-
-#SCO OpenServer 5.0.6 with SCO /bin/cc.
-# Add -DDCLTIMEVAL when building with UDK.
-#Like 5.0.5. IMPORTANT: Use sco32v506a target for 5.0.6a.
-sco32v506:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -b elf -DPOSIX $(KFLAGS)"
-
-#SCO OpenServer 5.0.6 with networking, SCO /bin/cc.
-# Add -DDCLTIMEVAL when building with UDK.
-# IMPORTANT: Use sco32v506a target for 5.0.6a.
-sco32v506net:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -b elf -DPOSIX $(KFLAGS)"
-
-#SCO OpenServer 5.0.6a, no networking, SCO development tools.
-#This one has patched sio drivers that, for the first time,
-#actually handle modem signals correctly.
-# Add -DDCLTIMEVAL when building with UDK.
-sco32v506a:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR506A -DNEEDMDMDEFS \
- -b elf -DPOSIX $(KFLAGS)"
-
-#SCO OpenServer 5.0.6a with networking, SCO development tools.
-# Add -DDCLTIMEVAL when building with UDK.
-sco32v506anet:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR506A -DNEEDMDMDEFS \
- -b elf -DPOSIX $(KFLAGS)"
-
-#SCO OpenServer 5.0.7, no networking, SCO development tools.
-#Adds flags to make PTY and SSH commands work. These have been tested
-#only in 5.0.7 but probably they can also be added to earlier OSR5 targets.
-sco32v507:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR507 -DNEEDMDMDEFS \
- -DHAVE_PTSNAME -DHAVE_PTMX -DHAVE_GRANTPT \
- -b elf -DPOSIX $(KFLAGS)"
-
-#SCO OpenServer 5.0.7 as above but with networking.
-sco32v507net:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR507 -DNEEDMDMDEFS \
- -DHAVE_PTSNAME -DHAVE_PTMX -DHAVE_GRANTPT \
- -b elf -DPOSIX $(KFLAGS)"
-
-#Tandy 16/6000 with Xenix 3.0
-#Add more -DNOxxx options to remove features if program won't load.
-#Successful operation is a function of program size, physical memory,
-#available swap space, etc. The following stripped-down configuration
-#seems to work on most Tandy 6000s. NOTE: "-+" means allow long variable
-#names, needed for C-Kermit 6.0 because some identifiers are not unique
-#within the first six characters.
-#C-Kermit 7.0 does not build here; "too many defines".
-trs16:
- @echo 'Making C-Kermit $(CKVER) for Tandy 16/6000, Xenix 3.0...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -+ -DATTSV -DTRS16 -DNOMKDIR -DDCLPOPEN -DCK_CURSES \
- -DNODEBUG -DNOTLOG -DNOHELP -DNOSCRIPT -DNOCSETS -DNOIKSD \
- -DNOREDIRECT -DNOSYSLOG -DNOPUTENV -DNOREALPATH -DNOLEARN \
- $(KFLAGS) -O" "LIBS= -lcurses -ltermcap" "LNKFLAGS = -+ -n -s"
-
-#MINIX/2.0 32 Bit version for intel 386+ running the POSIX-compliant MINIX
-# version 2.0 (The definition of fatal avoids a conflict with a symbol by
-# the same name in the curses library.) It is impossible to compile with
-# network support since Minix does not support Berkeley sockets.
-# Note: use chmem liberally on the compiler passes, make, and the final
-# kermit executable. (3 megabytes of memory for each is sufficient.)
-# From Terry McConnell, Syracuse U, and Will Rose. Will says:
-# The stacks for make and some compiler passes needed to be increased
-# with chmem as follows:
-# make 1MB
-# /usr/lib/em_cemcom.ansi 3MB
-# /usr/lib/em_opt 1MB
-# /usr/lib/i386/cg 1MB
-# /usr/lib/i386/as 1MB
-# The compiler temporary directory was set to /usr/tmp via the TMPDIR
-# environment variable; more than 1MB of temporary space was needed.
-# Kermit itself needs at least 1MB of stack.
-minix20:
- @echo 'Making C-Kermit $(CKVER) for MINIX 2.0/386...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} EXT=o \
- "CFLAGS= -wo -DV7 -DMINIX2 -DMINIX -DSIG_V -D_POSIX_SOURCE \
- -DCKCPU=\\\"i-386\\\" -DNOIKSD -Dfatal=myfatal -DCK_CURSES -DNOLEARN \
- -DNOSYSLOG -DUSE_MEMCPY -DNOREALPATH $(KFLAGS)" "LIBS= -lcurses"
-
-#MINIX/386 (PC Minix modified by Bruce Evans in Australia for 386 addressing)
-# For MINIX 1.5+ (but < 2.0)
-minix386:
- @echo 'Making C-Kermit $(CKVER) for MINIX/386...'
- @echo 'TOTALLY UNTESTED!'
- $(MAKE) wermit EXT=s KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DV7 -DMINIX -D_POSIX_SOURCE -DNOLEARN $(KFLAGS)"
-
-#MINIX/386 Minix modified by Bruce Evans in Australia to use 386 addressing
-minix386gcc:
- @echo 'Making C-Kermit $(CKVER) for MINIX/386 with gcc...'
- @echo 'TOTALLY UNTESTED!'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC=gcc -g -O" "CC2=gcc -g" \
- "CFLAGS= -DV7 -DMINIX -D_POSIX_SOURCE -DNOLEARN $(KFLAGS)"
-
-#MINIX - 68k version with ACK compiler.
-# If you have trouble compiling or running wart, "touch wart".
-# If it still doesn't work, "touch ckcpro.c".
-# The version configured below has many features removed, including
-# the TRANSMIT, MSEND, HELP, and SCRIPT commands, international
-# character set support, and the entire script programming language.
-# But it does have an interactive command parser.
-# Make sure make(1) has (at least) 100000 chmemory!
-# If you are using the Amsterdam C compiler, you might have to add "-D__ACK__".
-minix68k:
- @echo 'Making C-Kermit $(CKVER) for MINIX 68k with ACK...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE -DNOLEARN \
- -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
- -DNOSCRIPT -DNOCSETS -DNOSPL $(KFLAGS) \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V"
-
-#MINIX - 68k version with c68 compiler.
-# If you have trouble compiling or running wart, "touch wart" or
-# "touch ckcpro.c". Compiling ckudia.c (no -DNODIAL!) might fail. :-(
-# Give c68 250000 bytes of stack+heap; make sure make(1) has at least
-# 100000 chmemory. On a 1MB Atari ST this means that the recursive
-# call of make fails due to memory shortage. Try "make -n minixc68 >makeit",
-# followed by ". makeit". Otherwise, as above.
-minixc68:
- @echo 'Making C-Kermit $(CKVER) for MINIX 68k with c68...
- $(MAKE) wermit "CC= cc -c68" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE -DNOLEARN \
- -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
- -DNOSCRIPT -DNOCSETS -DNOSPL $(KFLAGS) \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V"
-
-#MINIX - 68k version with c68 compiler.
-#A variation on the above that was recently (Sep 95) reported to work.
-minixc68a:
- @echo 'Making C-Kermit $(CKVER) for MINIX 68k with c68...
- $(MAKE) wermit "CC= cc -c68" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE \
- -DCK_ANSIC -DNODEBUG -DNOTLOG -DMINIDIAL -DEXTEN -DMYCURSES \
- -DNOSCRIPT -DNOCSETS -DNOSPL -DNOJC -DDIRENT -DNOLEARN \
- -DNOSETKEY -DNOESCSEQ $(KFLAGS) \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V"
-
-#MIPS Computer Systems with UMIPS RISC/OS 4.52 = AT&T UNIX System V R3.0.
-#Remove -DNOJC if job control can be safely used.
-mips:
- @echo 'Making C-Kermit $(CKVER) for MIPS RISC/OS...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DMIPS -DDIRENT -DCK_POLL -DNOJC -DNOLEARN -DPID_T=int \
- -DGID_T=gid_t -DUID_T=uid_t -i -O1500 $(KFLAGS)"
-
-#As above, but with TCP/IP and fullscreen support.
-mipstcpc:
- @echo 'Making C-Kermit $(CKVER) for MIPS RISC/OS...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DMIPS -DDIRENT -DCK_POLL -DNOJC \
- -DTCPSOCKET -DCK_CURSES -I/usr/include/bsd \
- -DPID_T=int -DGID_T=gid_t -DUID_T=uid_t -i -O1500 $(KFLAGS)" \
- "LIBS = -lcurses -lbsd"
-
-#Motorola Delta System V/68 R3, signal() is void rather than int.
-#Uses dirent.h and Honey DanBer uucp. Supports TCP/IP.
-#After building, use "mcs -d" to reduce size of the executable program.
-sv68r3:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DSV68 -DDIRENT -DHDBUUCP -DNO_DNS_SRV -DTCPSOCKET \
- -DNOUNICODE -DNOLEARN -DUSE_MEMCPY $(KFLAGS) -O" "LNKFLAGS ="
-
-#Motorola Delta System V/68 R3V5, signal() is void rather than int.
-#Uses dirent.h and Honey DanBer UUCP. Supports TCP/IP.
-#After building, use "mcs -d" to reduce size of the executable program.
-sv68r3v5:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V5'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DSV68 -DDIRENT -DHDBUUCP -DNO_DNS_SRV -DUSE_MEMCPY \
- -DTCPSOCKET -DINADDRX -DNOUNICODE -DFNFLOAT -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS =" "LIBS = -linet -lm"
-
-#Motorola MVME147 System V/68 R3 V5.1. Requires gcc 2.1 to compile.
-#After building, use "mcs -d" to reduce size of the executable program.
-sv68r3v51:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V5.1'
- $(MAKE) wermit "CC=gcc-delta" "CC2=gcc-delta" \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNODEBUG -DNO_DNS_SRV -DNOLEARN \
- -DNOUNICODE -DFNFLOAT -DSV68 -DUSE_MEMCPY $(KFLAGS) \
- -O2 -v -ftraditional" \
- "LNKFLAGS = -s -v" "LIBS = -lm881 -lm"
-
-#Motorola MVME147 System V/68 R3V6. derived from Motorola Delta System R3V5.
-#Checked on larger Motorola System V/68 R3V6 (with NSE Network Services Ext.)
-#After building, use "strip" to reduce size of the executable program.
-# "LIBS = -lnsl" removed in C-Kermit 6.1 - put back if needed.
-# "LIBS = lm" added in 7.1/8.0 for floating-point math.
-# ckuusr.c clobbers the optimizer.
-sv68r3v6:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V6'
- $(MAKE) ckuusr.$(EXT) KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSV68R3V6 -DDIRENT -DHDBUUCP -DNOLOGIN -DNOINITGROUPS \
- -DNOSYMLINK -DNOREDIRECT -DNOGFTIMER -DTCPSOCKET -DDCLGETCWD -DSV68 \
- -DNO_DNS_SRV -DNOUNICODE -DFNFLOAT -DSELECT -DUSE_MEMCPY $(KFLAGS)"
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSV68R3V6 -DDIRENT -DHDBUUCP -DNOLOGIN -DNOINITGROUPS \
- -DNOSYMLINK -DNOREDIRECT -DNOGFTIMER -DTCPSOCKET -DDCLGETCWD -DSV68 \
- -DNO_DNS_SRV -DNOUNICODE -DFNFLOAT -DSELECT -DUSE_MEMCPY $(KFLAGS)" \
- "LNKFLAGS =" "LIBS = -lm"
-
-#Motorola Delta System V/88 R32, signal() is void rather than int.
-#Uses dirent.h and Honey DanBer uucp. Needs <sys/utime.h> for setting
-#file dates. Supports TCP/IP.
-#After building, use "mcs -d" to reduce size of the executable program.
-sv88r32:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/88 R32...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSV88R32 -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DSYSUTIMEH -DCK_CURSES -DNOGETUSERSHELL -DGTODONEARG $(KFLAGS) -O" \
- "LIBS= -lcurses -lresolv" "LNKFLAGS = -s"
-
-#Motorola Delta System V/88 R40. Has <sys/termiox.h>, regular Berkeley
-#sockets library, i.e. in.h and inet.h are not misplaced in sys (rather than
-#netinet and arpa, respectively). Uses ANSI C constructs, advisory file
-#locking on devices, etc. curses support added. Reportedly, the
-#/usr/include/sys/vnode.h file has a bug which must be fixed before this
-#makefile entry can work correctly. The "if DEBUG" directive at about line
-#320 must be changed to "ifdef DEBUG" (Reportedly, this was fixed in
-#in System V/88 R4.3).
-#After building, use "mcs -d" to reduce size of the executable program.
-sv88r40:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/88 R40...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DMOTSV88R4 -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL -DGTODONEARG -DFNFLOAT \
- $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -lresolv -lm" "LNKFLAGS = -s"
-
-#As above but without the floating-point math library.
-sv88r40nm:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/88 R40...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DMOTSV88R4 -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL -DGTODONEARG $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -lresolv" "LNKFLAGS = -s"
-
-#As above but with floating-point math library support \ffp...() functions
-#and S-Expressions.
-
-#Olivetti X/OS R2.3, 3.x.
-#NOTES:
-# . If you build the executable on 2.x X/OS, it will also run on 3.x.
-# . If you build it on 3.x X/OS, it will NOT run on 2.x.
-# . Kermit can run with no privileges unless the uucp lines are protected,
-# in which case kermit must be owned by uucp with suid bit set:
-# chown uucp kermit ; chmod 4111 kermit.
-xos23:
- @echo 'Making C-Kermit $(CKVER) for Olivetti X/OS...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- 'CFLAGS=-OLM -DOXOS -DTCPSOCKET -DHDBUUCP $(KFLAGS)' \
- "LIBS=" "LNKFLAGS="
-
-#As above, but with curses.
-xos23c:
- @echo 'Making C-Kermit $(CKVER) for Olivetti X/OS with curses...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- 'CFLAGS=-OLM -DOXOS -DTCPSOCKET -DHDBUUCP -DCK_CURSES $(KFLAGS)' \
- "LIBS=-lcurses" "LNKFLAGS="
-
-ckuuid:
- @echo 'building C-Kermit $(CKVER) set-UID/set-GID test programs'
- $(CC) -DANYBSD -DSAVEDUID -o ckuuid1 ckuuid.c
- $(CC) -DANYBSD -o ckuuid2 ckuuid.c
- $(CC) -DANYBSD -DNOSETREU -o ckuuid3 ckuuid.c
- $(CC) -DANYBSD -DSETEUID -DNOSETREU -o ckuuid4 ckuuid.c
- $(CC) -o ckuuid5 ckuuid.c
- @echo 'Read the top of ckuuid.c for directions...for testing'
- @echo 'you must make these programs setuid and setgid'
-
-############################################################################
-# A N T I Q U I T I E S
-#
-# The following are antique targets from C-Kermit 5A or earlier. They have
-# not been updated or tested in years. Most of them will need recent features
-# disabled, usually with some combination of -DNOUNICODE, -DNOIKSD, -DNOANSI,
-# -DNOCKGHNLHOST, -DNO_DNS_SRV, -DNOREDIRECT, -DNOREALPATH, -DNOCURSES, etc.
-# They are also missing the KTARGET=$${KTARGET:-$(@)} business.
-# For details see ckuins.txt and ckccfg.txt.
-#
-############################################################################
-
-#Berkeley Unix 2.8, 2.9 for PDP-11s with I&D space, maybe also Ultrix-11???
-#C-Kermit(5A) is simply too large (even turning off almost every feature
-#available) to run without both I&D space plus overlays. The old comment
-#suggested running 'pcc' but that won't help. Changing 'cc' to 'ckustr.sed'
-#will cause a string extraction to be done, saving D space by moving strings
-#to a file.
-bsd29:
- @echo Making C-Kermit $(CKVER) for 2.8 or 2.9BSD.
- @echo Read the makefile if you have trouble with this...
- $(MAKE) ovwermit \
- "CFLAGS= -DBSD29 -DNODEBUG -DNOTLOG -DNOCSETS -DNOHELP \
- -DNOSCRIPT -DNOSPL -DNOXMIT -DNODIAL $(KFLAGS)" \
- "LNKFLAGS= -i -lndir" "CC= cc " "CC2= cc"
-
-bsd210:
- @echo Please use ckubs2.mak to build C-Kermit $(CKVER) for 2.10BSD.
-
-bsd211:
- @echo Please use ckubs2.mak to build C-Kermit $(CKVER) for 2.11BSD.
-
-#Charles River Data Systems Universe with UNOS Version 9.2
-crds:
- @echo 'Making C-Kermit $(CKVER) for Charles River Data Systems...'
- make xermit \
- "CFLAGS = -DATTSV -DNOANSI -DDIRENT -DLONGFN -DTCPSOCKET \
- -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DNOSETREU \
- -Dsuspend=ksuspend $(KFLAGS) -O" "LNKFLAGS ="
-
-#Microport SV/AT for IBM PC/AT 286 and clones, System V R2.
-#The -O flag may fail on some modules (like ckuus2.c), in which case you
-#should compile them by hand, omitting the -O. If you get "hash table
-#overflow", try adding -DNODEBUG.
-#Also, reportedly this compiles better with gcc than with cc.
-mpsysv:
- @echo 'Making C-Kermit $(CKVER) for Microport SV/AT 286...'
- $(MAKE) wermit \
- "CFLAGS= -DATTSV -DNOLEARN $(KFLAGS) -O -Ml" "LNKFLAGS = -Ml"
-
-#Microsoft "Xenix/286" e.g. for IBM PC/AT
-xenix:
- @echo 'Making C-Kermit $(CKVER) for Xenix/286'
- $(MAKE) wermit \
- "CFLAGS= -DXENIX -DNOFILEH -DNOLEARN $(KFLAGS) -Dunix -F 3000 -i" \
- "LNKFLAGS = -F 3000 -i"
-
-#PC/IX, Interactive Corp System III for IBM PC/XT
-pcix:
- @echo 'Making C-Kermit $(CKVER) for PC/IX...'
- $(MAKE) wermit \
- "CFLAGS= -DPCIX -DISIII -DNOLEARN $(KFLAGS) \
- -Dsdata=sdatax -O -i" "LNKFLAGS = -i"
-
-#Integrated Solutions Inc V8S VME 68020
-isi:
- @echo Making C-Kermit $(CKVER) for 4.2BSD on ISI...
- $(MAKE) wermit "CC = cc" \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DINADDRX -DDCLPOPEN -DDEBUG -DNOSETREU \
- -DCK_CURSES -DNOLEARN $(KFLAGS)" "LIBS = -lcurses -ltermcap"
-
-#Interactive Corp version of AT&T System III
-#is3: (very old, probably not sufficient for 5A or later)
-# @echo 'Making C-Kermit $(CKVER) for Interactive System III...'
-# make wermit "CFLAGS = -DISIII -Ddata=datax -O -i" "LNKFLAGS = -i"
-#The following should work, use it if you don't have gcc.
-#Use is3gcc if you have gcc.
-is3:
- @echo 'Making C-Kermit $(CKVER) for Interactive System III...'
- $(MAKE) wermit \
- "CFLAGS= -DISIII $(KFLAGS) -Ddata=datax -DNAP -DHDBUUCP
- -DLOCK_DIR=\"/usr/spool/uucp\" -DSIGTYP=void -O -i" "LNKFLAGS = -i"
-
-#Interactive UNIX System V R3, no network support. Uses <dirent.h> and Honey
-#DanBer UUCP. If this entry does not compile correctly, try any or all of the
-#following. These suggestions also apply more or less to the other is5r3xxx
-#entries that follow this one.
-# . Remove the UID_T and GID_T definitions, or change them as required.
-# . Change -DDIRENT to -DSDIRENT.
-# . Add -DSIGTYP=void.
-# . Remove -g from LNKFLAGS.
-# . Add -DNOANSI to remove compiler complaints about ANSI C constructions
-# . Add other -DNOxxx's to save space (e.g. -DNOCSETS)
-# See the next few makefile entries for related examples.
-# Also see sys5r32is for making a portable i386 SVR3 binary.
-is5r3:
- @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix or later...'
- @echo 'If this does not work please read the makefile entry.'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -g -DNOCSETS -DNOREALPATH \
- -DUID_T=ushort -DGID_T=ushort -DI386IX $(KFLAGS)" \
- "LNKFLAGS = -g"
-
-#Interactive Corp System System V R3 with gcc
-is3gcc:
- @echo 'Making C-Kermit $(CKVER) for Interactive System V R3 / gcc...'
- $(MAKE) wermit CC=gcc CC2=gcc \
- 'CFLAGS = -D_SYSV3 -DISIII -Ddata=datax -DNAP -DHDBUUCP -DNOREALPATH \
- -DLOCK_DIR=\"/usr/spool/uucp\" -DSIGTYP=void -O' "LNKFLAGS ="
-
-#Interactive UNIX System V R3, POSIX variant. Untested.
-#Uses dirent.h and Honey DanBer uucp. Read comments in is5r3 entry.
-is5r3p:
- @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix or later...'
- $(MAKE) wermit \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -g -DNOCSETS -DNOREALPATH \
- -DI386IX -DPOSIX $(KFLAGS)" "LNKFLAGS=" "LIBS=-lcposix"
-
-#Interactive UNIX SVR3 2.2.1, job control, curses, no net, gcc.
-is5r3gcc:
- $(MAKE) wermit CC=gcc CC2=gcc \
- "CFLAGS=-g -posix -DSVR3 -DDIRENT -DNOREALPATH \
- -DHDBUUCP -O -DNOCSETS -DI386IX -DSVR3JC -DCK_CURSES \
- $(KFLAGS)" LNKFLAGS="-posix" LIBS="-lcurses -lc_s"
-
-#Interactive UNIX System V R3 with TCP/IP network support.
-#Needs -linet for net functions. signal() is void rather than int.
-#Uses dirent.h and Honey DanBer uucp. Read comments in is5r3 entry.
-#Also see is5r3net2 if you have trouble with this entry.
-is5r3net:
- @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix...'
- @echo 'If this does not work please read the makefile entry.'
- $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET -DNOREALPATH \
- -DI386IX $(KFLAGS) -O" "LIBS = -linet"
-
-is5r3netgcc:
- $(MAKE) is5r3net CC=gcc CC2=gcc
-
-#Interactive UNIX System V R3, no job control, signal() void rather than int.
-#Uses dirent.h and Honey DanBer uucp. Needs -linet for net functions.
-#Read comments in is5r3 entry. Use this entry if is5r3net fails.
-#Saves some space by stripping (-s) and using shared library (-lc_s).
-is5r3net2:
- @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix...'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET -DNOJC -DNOREALPATH \
- -DSIGTYP=void -DNOANSI -DI386IX $(KFLAGS) -O" \
- "LNKFLAGS= -s" "LIBS = -linet -lc_s"
-
-#Interactive UNIX System V R3 (version 2.2 or later) with job control & curses.
-#Uses dirent.h and Honey DanBer UUCP.
-is5r3jc:
- @echo 'Making C-Kermit $(CKVER) for Interactive Unix 2.2 or later...'
- $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \
- -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES \
- -DPOSIX_JC -DCK_REDIR -DCK_POLL -DDCLGETCWD \
- $(KFLAGS)" "LIBS=-lcurses -lc_s -linet"
-
-is5r3jcgcc:
- $(MAKE) is5r3jc CC="gcc -DCK_ANSILIBS -DDCGPWNAM -O4" CC2=gcc \
- KFLAGS="$(KFLAGS)" LNKFLAGS="$(LNKFLAGS)"
-
-#Sunsoft/Interactive UNIX System V R3 (version 2.2 or later)
-#with job control, curses, and TCP/IP networking.
-#Uses dirent.h and Honey DanBer UUCP.
-is5r3netjc:
- @echo 'Making C-Kermit $(CKVER) for Interactive Unix 2.2 or later...'
- $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \
- -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES \
- -DPOSIX_JC -DCK_REDIR -DTCPSOCKET -DSELECT \
- $(KFLAGS)" "LIBS=-linet -lcurses -lc_s"
-
-is5r3netjcgcc:
- $(MAKE) is5r3netjc CC="gcc -DCK_ANSILIBS -DDCGPWNAM -O4" CC2=gcc \
- KFLAGS="$(KFLAGS)" LNKFLAGS="$(LNKFLAGS)"
-
-#Masscomp System III
-rtu:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU System III...'
- $(MAKE) wermit \
- "CFLAGS= -UFIONREAD -DATTSV $(KFLAGS) -O" "LNKFLAGS =" "LIBS= -ljobs"
-
-#Masscomp/Concurrent RTU 4.0 or later, Berkeley environment.
-#Includes <ndir.h> = /usr/include/ndir.h
-#Note "LIBS = -lndir" might not be necessary because of "ucb make".
-rtubsd:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.1A...'
- ucb make wermit \
- "CFLAGS= -DBSD4 -DRTU -DNDIR -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
- "LIBS = -lndir"
-
-#Masscomp/Concurrent RTU 4.0 or later, same as above,
-#Includes "usr/lib/ndir.h"
-#Note "LIBS = -lndir" might not be necessary because of "ucb make".
-rtubsd2:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.1A...'
- ucb make wermit \
- "CFLAGS= -DBSD4 -DRTU -DXNDIR -DHDBUUCP $(KFLAGS)" \
- "LIBS = -lndir"
-
-#Masscomp/Concurrent RTU 4.0 or later, same as above,
-#Includes <sys/ndir.h>
-#Note "LIBS = -lndir" might not be necessary because of "ucb make".
-rtubsd3:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.x BSD...'
- ucb make wermit "CFLAGS= -DBSD4 -DRTU -DHDBUUCP $(KFLAGS)" \
- "LIBS = -lndir"
-
-#Masscomp/Concurrent RTU 4.0 or later, System V R2, using <dirent.h>.
-#In case of problems, add back the -DRTU switch.
-#In case -DTCPSOCKET gives trouble, remove it.
-rtus5:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.x...'
- $(MAKE) wermit \
- "CFLAGS= -DATTSV -DHDBUUCP -DDIRENT -DTCPSOCKET $(KFLAGS)"
-
-#Masscomp/Concurrent RTU 4.x, System V R3, using <dirent.h>.
-#Use this one if rtus5 gives warnings about pointer type mismatches.
-#In case of problems, add back the -DRTU switch.
-rtus5r3:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU Sys V R3...'
- $(MAKE) wermit "CFLAGS= -DSVR3 -DHDBUUCP -DDIRENT $(KFLAGS)"
-
-#DEC Pro-3xx with Pro/Venix V1.0 or V1.1
-# Requires code-mapping on non-I&D-space 11/23 processor, plus some
-# fiddling to get interrupt targets into resident code section.
-# This almost certainly doesn't work any more.
-provx1:
- @echo 'Making C-Kermit $(CKVER) for DEC Pro-3xx, Pro/Venix 1.x...'
- $(MAKE) wart "CFLAGS= -DPROVX1 $(KFLAGS)" "LNKFLAGS= "
- $(MAKE) wermit "CFLAGS = -DPROVX1 -DNOFILEH -md780" \
- "LNKFLAGS= -u _sleep -lc -md780"
-
-#Nixdorf Targon/31.
-#AT&T UNIX System V R3, signal() is void rather than int.
-#Uses dirent.h without Honey DanBer uucp.
-t31tos40x:
- @echo 'Making C-Kermit $(CKVER) for Targon/31 with TOS 4.0.xx...'
- $(MAKE) wermit \
- "CFLAGS= -DSVR3 -DDIRENT $(KFLAGS) -O" \
- "LNKFLAGS="
-
-#NCR Tower 1632, OS 1.02
-tower1:
- @echo 'Making C-Kermit $(CKVER) for NCR Tower 1632, OS 1.02...'
- $(MAKE) wermit "CFLAGS= -DTOWER1 $(KFLAGS)"
-
-#NCR Tower 32, OS Release 1.xx.xx
-tower32-1:
- @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 Rel 1 System V R2...'
- @echo 'Add KFLAGS=-DISDIRBUG if you get errors about S_ISREG/S_ISDIR.'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV $(KFLAGS) -O" "LNKFLAGS = -n"
-
-#NCR Tower 32, OS Release 2.xx.xx
-tower32-2:
- @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 Rel 2 System V R2...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -O2" \
- "LNKFLAGS = -n"
-
-#NCR Tower 32, OS Releases based on System V R3
-#Don't add -DNAP (doesn't work right) or -DRDCHK (not available in libc).
-tower32:
- @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 System V R3...'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNOSYSIOCTLH $(KFLAGS) \
- -DUID_T=ushort -DGID_T=ushort -O1"
-
-#NCR Tower 32, OS Releases based on System V R3
-tower32g:
- @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 System V R3, gcc...'
- $(MAKE) wermit "CC = gcc" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNOSYSIOCTLH $(KFLAGS) \
- DUID_T=ushort -DGID_T=ushort -O -fstrength-reduce -fomit-frame-pointer"
-
-#Fortune 32:16, For:Pro 1.8 (mostly like 4.1bsd)
-ft18:
- @echo 'Making C-Kermit $(CKVER) for Fortune 32:16 For:Pro 1.8...'
- $(MAKE) wermit \
- "CFLAGS= -DNODEBUG -DBSD4 -DFT18 -DNOFILEH $(KFLAGS) \
- -DPID_T=short"
-
-#Fortune 32:16, For:Pro 2.1 (mostly like 4.1bsd).
-#The modules that break the optimizer are compiled separately.
-ft21:
- @echo 'Making C-Kermit $(CKVER) for Fortune 32:16 For:Pro 2.1...'
- $(MAKE) ckuusx.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \
- -SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \
- "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
- $(MAKE) ckuxla.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \
- -SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \
- "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
- $(MAKE) ckudia.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \
- -SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \
- "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
- $(MAKE) wermit \
- "CFLAGS= -O -DNODEBUG -DBSD4 -DFT21 -DNOFILEH -SYM 800 \
- -DCK_CURSES $(KFLAGS) -DPID_T=short" \
- "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
-
-#Valid Scaldstar
-#Berkeleyish, but need to change some variable names.
-valid:
- @echo 'Making C-Kermit $(CKVER) for Valid Scaldstar...'
- $(MAKE) wermit \
- "CFLAGS= -DBSD4 -DNODEBUG -DNOTLOG -Dcc=ccx -DFREAD=1 $(KFLAGS)"
-
-#IBM IX/370 on IBM 370 Series mainframes
-#Mostly like sys3, but should buffer packets.
-ix370:
- @echo 'Making C-Kermit $(CKVER) for IBM IX/370...'
- $(MAKE) wermit "CFLAGS = -DIX370 -DATTSV $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
-
-#Amdahl UTS 2.4 on IBM 370 series compatible mainframes.
-#Mostly like V7, but can't do initrawq() buffer peeking.
-uts24:
- @echo 'Making C-Kermit $(CKVER) for Amdahl UTS 2.4...'
- $(MAKE) wermit "CFLAGS=-DV7 -DPROCNAME=\\\"$(PROC)\\\" \
- -DUTS24 -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
- -DNPTYPE=$(NPTYPE) $(DIRECT) $(KFLAGS)"
-
-#Amdahl UTSV UNIX System V = System V R2 or earlier.
-utsv:
- @echo 'Making C-Kermit $(CKVER) for Amdahl UTSV...'
- $(MAKE) wermit \
- "CFLAGS = -DUTSV $(KFLAGS) -i -O" "LNKFLAGS = -i"
-
-#Amdahl UTSV UNIX System V = System V R2 or earlier, with TCP sockets library.
-utsvtcp:
- @echo 'Making C-Kermit $(CKVER) for Amdahl UTSV w/tcp...'
- $(MAKE) wermit "CFLAGS = \
- -DTCPSOCKET -DUTSV $(KFLAGS) -i -O" "LNKFLAGS = -i" \
- "LIBS = -lsocket"
-
-#BBN C/70 with IOS 2.0
-#Mostly Berkeley-like, but with some ATTisms
-c70:
- @echo 'Making C-Kermit $(CKVER) for BBN C/70 IOS 2.0...'
- $(MAKE) wermit "CFLAGS= -DBSD4 -DC70 $(KFLAGS)"
-
-#Zilog ZEUS 3.21
-zilog:
- @echo 'Making C-Kermit $(CKVER) for Zilog Zeus 3.21...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DZILOG -DNODEBUG $(KFLAGS) -i -O" \
- "LNKFLAGS = -i -lpw"
-
-#Whitechapel MG-1 Genix 1.3
-white:
- @echo 'Making C-Kermit $(CKVER) for Whitechapel MG-1 Genix 1.3...'
- @touch ckcpro.c
- $(MAKE) wermit "CFLAGS= -DBSD4 -Dzkself()=0 $(KFLAGS)"
-
-#Pixel 1000
-pixel:
- @echo 'Making C-Kermit $(CKVER) for Pixel 1000...'
- $(MAKE) wermit "CFLAGS= -DBSD4 -Dzkself()=0 $(KFLAGS)"
-
-ptx:
- $(MAKE) "MAKE=$(MAKE)" dynixptx12
-
-#CDC VX/VE 5.2.1
-vxve:
- @echo 'Making C-Kermit $(CKVER) for CDC VX/VE 5.2.1...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DVXVE -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
-
-#DIAB DS90 or LUXOR ABC-9000 with pre-5.2 DNIX. Sys V with nap() and rdchk().
-# nd = no opendir(), readdir(), closedir(), etc.
-# Some of the modules fail to compile with -O.
-dnixnd:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with very old DNIX 5.2.'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DNAP -DRDCHK -DDCLPOPEN \
- -U__STDC__ $(KFLAGS)"
-
-#DIAB DS90 with DNIX 5.2. Sys V with nap() and rdchk().
-# This one has opendir(), readdir(), closedir(), etc.
-# Some of the modules fail to compile with -O.
-dnix:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with old DNIX 5.2...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DNAP -DRDCHK -DDIRENT \
- -U__STDC__ $(KFLAGS)"
-
-#DIAB DS90 with DNIX 5.2. Sys V with nap() and rdchk().
-# As above, but with curses and TCP/IP.
-# You might get complaints about redefinition of O_RDONLY, etc, because
-# of bugs in the DNIX header files, which can be fixed by adding #ifndef...
-# around the offending definitions in the header files.
-dnixnetc:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with old DNIX 5.2...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DNAP -DRDCHK -DDIRENT \
- -DTCPSOCKET -DCK_CURSES -I/usr/include/bsd -U__STDC__ $(KFLAGS)" \
- "LIBS = -ln -lcurses"
-
-#DIAB DS90 with DNIX 5.3 or later, with HDB UUCP, nap() and rdchk().
-dnix5r3:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
- @echo 'with Honey DanBer UUCP'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
- -DCK_CURSES -DRENAME $(KFLAGS) -O" "LIBS= -lcurses"
-
-#DIAB DS90 with DNIX 5.3 or later, with HDB UUCP, nap() and rdchk() + TCP/IP
-dnix5r3net:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
- @echo 'with Honey DanBer UUCP and TCP/IP'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
- -DTCPSOCKET -DCK_CURSES -DRENAME $(KFLAGS) -O \
- -I/usr/include/bsd" "LIBS = -ln -lcurses"
-
-#DIAB DS90 with DNIX 5.3 2.2 or later, with HDB UUCP, nap() and rdchk(),
-#ANSI C compilation and libraries.
-#Note that for DNIX 5.3 2.2 you have to correct a bug in /usr/include/stdlib.h:
-#change "extern void free(char *str);"
-#to "extern void free(void *str);"
-#NOTE: This bug is reportedly fixed in DNIX 5.3 2.2.1.
-#Should you get fatal errors caused by harmless pointer-type mismatches,
-#like between signed and unsigned char, just remove -X7.
-dnix5r3ansi:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
- @echo 'with ANSI C Honey DanBer UUCP'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DDIAB -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
- -DCK_ANSILIBS -DCK_CURSES -DRENAME -O -X7 -X9 $(KFLAGS)" \
- "LIBS= -lcurses"
-
-#DIAB DS90 with DNIX 5.3 2.2 or later, with HDB UUCP, nap() and rdchk(),
-# + TCP/IP, ANSI C compilation and libraries.
-#Should you get fatal errors caused by harmless pointer-type mismatches,
-#like between signed and unsigned char, just remove -X7.
-dnix5r3ansinet:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
- @echo 'with ANSI C Honey DanBer UUCP'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DDIAB -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
- -DTCPSOCKET -DCK_ANSILIBS -DCK_CURSES -DRENAME -O -X7 -X9 $(KFLAGS) \
- -I/usr/include/bsd" "LIBS= -ln -lcurses"
-
-# QNX 4.21 and above, 32-bit version, Watcom C32 10.6, fully configured,
-# except no job control because QNX 4.x does not support it. New NCURSES
-# library used instead of CURSES.
-#
-# -Oatx optimizes to favor speed over size: loop optimization, inline fn's.
-# -Os favors size over speed. Saves 30-40K out of about 1.75M.
-# -3r = generate 386 code with register-based arg passing.
-# -3s = generate 386 code with stack-based arg passing.
-# -ms = separate code & data 4GB segments (32-bit builds only).
-# -mf = flat memory model code+data in one 4GB segment (ditto).
-# -zc = place literal strings in code segment.
-# -N4M = Big stack (increase the digit upon SIGSEGVs at runtime).
-# chars are unsigned by default (-j makes them signed by default).
-# -NOUUCP is included because QNX doesn't use it.
-# Add these to the end if you like but they dump core on my QNX 4.25 system:
-#
-# @wermit -h >use.qnx
-# @usemsg wermit use.qnx
-# @rm use.qnx
-#
-# If you get warnings about HEADER or C_IN add -DNO_DNS_SRV.
-qnx32:
- @echo 'Making C-Kermit $(CKVER) for QNX 4.2x, 32-bit...'
- $(MAKE) xermit \
- "LNKFLAGS = -N4M -3r" \
- "CFLAGS = -ms -3r -DQNX -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL \
- -DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS -DNOJC \
- -DNOINITGROUPS -DNOUUCP -DCK_ANSIC -DPID_T=pid_t -Oatx -zc $(KFLAGS)" \
- "LIBS= -lsocket -lncurses -ltermcap"
-
-# As above but no networking since some QNX systems do not have TCP/IP
-# installed, or the TCP/IP developers kit, which includes all the needed
-# header files. This entry has not been tested on a QNX system that, in
-# fact, does not have TCP/IP installed; some adjustments might be necessary,
-# in particular regarding the use of select(): is -lsocket needed, can we
-# get the needed definitions from non-TCP/IP header files (FD_SET, etc)?
-qnx32nonet:
- @echo 'Making C-Kermit $(CKVER) for QNX 4.2x, 32-bit, no net...'
- $(MAKE) xermit \
- "LNKFLAGS = -N4M -3r" \
- "CFLAGS = -3r -ms -DQNX -DNONET -DNOIKSD -DCK_CURSES \
- -DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS -DNOJC \
- -DNOUUCP -DCK_ANSIC -DPID_T=pid_t -Oatx -zc $(KFLAGS)" \
- "LIBS= -lsocket -lncurses -ltermcap"
- @wermit -h >use.qnx
- @usemsg wermit use.qnx
- @rm use.qnx
-
-# Synonym for qnx32.
-qnx:
- $(MAKE) qnx32 "KFLAGS=$(KFLAGS)"
-
-# QNX 4.21 and above, 16-bit version, Watcom C 8.5 - and higher on i286 PCs
-# and above.
-#
-# IMPORTANT: Do not use Watcom C 10.6!!!
-# If you have it installed, add "-v9.52 to CFLAGS"
-#
-# NOTE: QNX 4.23 onward does not work on 286's anyway.
-# Stacksize 26000, objects larger than 100 bytes in their own segments,
-# string constants to the codesegment, etc. Fully configured except job ctrl.
-# This entry works for building a 16-bit executable on a 32-bit system, but
-# has not been tested on a 16-bit system. Uses large memory model, links
-# explicitly with large-model sockets library. Correct-model curses library
-# is chosen automatically. See comment in qnx32 entry about -DNOUUCP.
-#
-# WARNING:
-#
-# Watcom C prior to 10.6 never had released curses library. To link against it,
-# you must obtain ported free curses source from ftp://ftp.qnx.com/usr/free,
-# then compile and build library (cursesl.lib) and place it in /usr/lib. You
-# must also copy curses.h to /usr/include. Be aware that if you have Watcom
-# 10.6 installed, you should already have curses.h, which is the new ncurses
-# library. You must back it up and use free curses.h instead, since ncurses is
-# only for 32-bit applications and some definitions in these files are
-# different (e.g., clearok()). For safety, curses is not defined in build.
-#
-# In 7.0 -DNOHELP added to keep ckuus2.c from blowing up; NOCSETS and NOSPL
-# added because ckuus4 was blowing up, and NOFLOAT just because it seemed
-# dangerous (remove -DNOFLOAT if you want to try it), The result works OK
-# except for some mysterious beeps upon termination of the top-level keyword.
-#
-# Things to try next time we get in trouble:
-# . Change -zt100 to something smaller like -zt25
-# . Change -Oatx to -Omilerat (enable stack checking)
-# . Maybe get rid of -v9.52 -- it's only there because we were warned.
-#
-qnx16:
- @echo 'Making C-Kermit $(CKVER) for QNX 4.21, 16-bit...'
- $(MAKE) xermit \
- "LNKFLAGS = -2 -ml -N 26000" \
- "CFLAGS = -2 -Oatx -zc -zt100 -ml -DQNX -DQNX16 -DNOUUCP -DNOHELP \
- -DCK_REDIR -DSELECT -DSELECT_H -DNOJC -DNOGETUSERSHELL -DNOCSETS \
- -v9.52 -DTCPSOCKET -DCK_RTSCTS -DCK_ANSIC -DNOINITGROUPS -DNOKVERBS \
- -DNORANDOM -DNOCSETS -DNOSPL -DNOFLOAT -DPID_T=pid_t $(KFLAGS)"
-
-# QNX 4.1, 16-bit version, with Watcom C 8.5 on i286 PCs and above.
-# stacksize 26000, objects larger than 100 bytes in their own segments,
-# string constants to the codesegment, etc. Add -DNOUUCP if desired.
-qnx16_41:
- @echo 'Making C-Kermit $(CKVER) for QNX 4.1, 16-bit...'
- $(MAKE) xermit \
- "LNKFLAGS = -mh -N 26000" "CFLAGS = -Wc,-fpc -Wc,-j -DNOGETUSERSHELL \
- -Wc,-Ols -Wc,-zdf -Wc,-zc -Wc,-zt100 -mh -DPOSIX -DQNX -DDIRENT \
- -DNOCYRIL -DNODEBUG -DNOMSEND -DMINIDIAL -DNOXMIT -DNOSCRIPT -DNOSPL \
- -DNOSETKEY -DNOINITGROUPS -DQNX16 -DPID_T=pid_t $(KFLAGS)"
-
-# QNX Neutrino 2 (pwaechtler@qnx.de) crosscompiled on QNX 4.25.
-# Gets lots of compiler warnings.
-qnx_nto2+:
- @echo 'Making C-Kermit $(CKVER) for QNX Neutrino 2+ '
- cc -o wart ckwart.c
- $(MAKE) xermit \
- "CC = qcc -Vgcc_ntox86" \
- "CC2 = qcc -Vgcc_ntox86" \
- "LNKFLAGS = " \
- "CFLAGS = -DNEUTRINO -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL \
- -DNOUUCP -DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS \
- -DNOJC -DNOINITGROUPS -DCK_ANSIC -DPID_T=pid_t -DUNIX -DDIRENT \
- -DMYREAD -DBSD44ORPOSIX -DSVORPOSIX -DNDGPWNAM $(KFLAGS)" \
- "LIBS= -lsocket -lncurses "
-
-# QNX 6 (= Neutrino 2.xx) native build (kirussel@cisco.com).
-qnx6:
- @echo 'Making C-Kermit $(CKVER) for QNX6'
- $(MAKE) xermit KTARGET=QNX6 \
- "CFLAGS = -DPOSIX -DCK_POSIX_SIG -DNETPTY -DNOARROWKEYS \
- -DUSE_TIOCSDTR -DBIGBUFOK -DCKMAXOPEN=100 -DRLOGCODE -DNOREALPATH \
- -DMAXNAMLEN=48 -DQNX6 -DUSE_TERMIO -DINIT_SPTY \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DDYNAMIC \
- -DTCPSOCKET -DNOGETUSERSHELL -DCK_REDIR -DSELECT -DSELECT_H \
- -DCK_RTSCTS -DNOJC -DSVORPOSIX -DBSD44ORPOSIX -DNOUUCP -DCK_ANSIC \
- $(KFLAGS) -O" \
- "LIBS= -lsocket -lncurses"
-
-#Ridge 32 with ROS 3.2
-ridge32:
- @echo 'Making C-Kermit $(CKVER) Ridge 32 ROS 3.2'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DNOFILEH -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
-
-#Altos 486, 586, or 986 with Xenix 3.0
-altos:
- @echo 'Making C-Kermit $(CKVER) for Altos x86 with Xenix 3.0...'
- $(MAKE) wermit \
- "CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \
- "LNKFLAGS= -i"
-
-#Altos 986 with Xenix 3.0, as above, but command-line only, minimal size.
-#For systems with small memories. It might also be necessary to chop certain
-#modules up into smaller pieces, e.g. ckuus3-6, because of symbol table
-#overflow. If this makefile is too big or complex for the Altos, compile
-#and link by hand or write shell scripts.
-altosc:
- @echo 'Making C-Kermit $(CKVER) for Altos x86 Xenix 3.0, remote...'
- $(MAKE) wermit \
- "CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG -DNOSCRIPT -DNODIAL \
- -DNOCSETS -DNOANSI -DNOMSEND -DNOSPL -DNOICP $(KFLAGS) -Mm -O" \
- "LNKFLAGS= -Mm -s"
-
-#Altos 986 with Xenix 3.0, as above, but interactive only, minimal size.
-altosi:
- @echo 'Making C-Kermit $(CKVER) for Altos x86 Xenix 3.0, local...'
- $(MAKE) wermit \
- "CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG -DNOSCRIPT -DNODIAL \
- -DNOCSETS -DNOANSI -DNOMSEND -DNOSPL -DNOCMDL -DNOFRILLS -DNOHELP \
- -DNOSETKEY $(KFLAGS) -Mm -O" "LNKFLAGS= -Mm -s"
-
-# Altos ACS68000 68000 System, UNIX System 3 Release 2, 512k memory.
-# also needs getcwd() external function; see ckuins.txt file.
-# also, sys/types.h needed modifying:
-# #ifdef __SYS_TYPES_H__, #define ..., #endif
-# also, ckuus2.c MUST be compiled NOOPT else symbol table is destroyed!
-# Submission by Robert Weiner/Programming Plus, rweiner@progplus.com.
-#
-altos3:
- @echo 'Making C-Kermit $(CKVER) for Altos ACS68k UNIX System III'
- $(MAKE) ckuus2.$(EXT) "CFLAGS = -DATTSV -DNOCSETS -DNOSETKEY -DNOJC \
- -DNODIAL -DDCLPOPEN -DNOSCRIPT -DNOHELP $(KFLAGS) -i"
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DNOCSETS -DNOSETKEY -DNOJC \
- -DNODIAL -DDCLPOPEN -DNOSCRIPT -DNOHELP $(KFLAGS) -i -O" \
- "LNKFLAGS = -i" "LIBS = getcwd.$(EXT)"
-
-#MINIX - Original PC version with 64K+64K limit.
-# Reportedly, the linker (asld) can run out of space while linking. The only
-# way around this is to make a copy of libc.a from which all modules that are
-# not used by Kermit are removed. If you have trouble compiling or running
-# wart, "touch wart". If that doesn't help, "touch ckcpro.c".
-# The version configured below has no interactive command parser.
-# If you can build this version successfully, maybe there will be room for
-# a minimal interactive command parser too; try replacing -DNOICP with
-# -DNOSPL, plus every other -DNOxxx flag there is, except for -DNOICP
-# (see ckccfg.txt).
-minix:
- @echo 'Making C-Kermit $(CKVER) for MINIX, no command parser...
- @echo 'TOTALLY UNTESTED!'
- $(MAKE) wermit EXT=s \
- "CFLAGS= -DV7 -DMINIX -i -D_MINIX -D_POSIX_SOURCE \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V \
- -DNOXMIT -DNOMSEND -DNOFRILLS -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
- -DNOSCRIPT -DNOCSETS -DNOICP -DNOSETKEY $(KFLAGS)" \
- "LNKFLAGS= -i -T"
-
-#MINIX - PC version with 64K+64K limit, new (as yet unreleased) ACK 2.0 beta C
-#compiler, which outputs .o object files, rather than .s. But 'make' still
-#expects .s files, so must be patched to use .o. Tested on Minix 1.5.10.
-minixnew:
- @echo 'Making C-Kermit $(CKVER) for MINIX (new ACK 2.0 compiler),'
- @echo 'no command parser... TOTALLY UNTESTED!'
- $(MAKE) wermit \
- "CFLAGS= -DV7 -DMINIX -i -D_MINIX -D_POSIX_SOURCE \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V -DNODIAL \
- -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS -DNOICP $(KFLAGS)" \
- "LNKFLAGS= -i -T"
-
-#PFU Compact A Series UNIX System V R3, SX/A TISP V10/L50 (Japan)
-#Maybe the -i link option should be removed?
-sxae50:
- @echo 'Making C-Kermit $(CKVER) for PFU SX/A V10/L50...'
- $(MAKE) xermit \
- "CFLAGS= -DSVR3 -DDIRENT -DsxaE50 -DTCPSOCKET $(KFLAGS) -i -O" \
- "LNKFLAGS= "
-
-#Tektronix 6130, 4319, 4301, etc, with UTek OS, /usr/spool/uucp/LCK./...
-#The models that support hardware flow control.
-utek:
- @echo 'Making C-Kermit $(CKVER) for 4.2BSD/UTek, hardware flow control'
- $(MAKE) wermit \
- "CFLAGS= -O -DLCKDIR -DBSD4 -DTCPSOCKET \
- -DUTEK -DDCLPOPEN -DLOCK_DIR=\\\"/usr/spool/uucp/LCK.\\\" \
- -DTRMBUFL=2048 -DCK_DTRCTS $(KFLAGS)"
-
-#Tektronix 4315, 4316, 4317 with UTek OS, /usr/spool/uucp/LCK./...
-#The models that do not fully support hardware flow control.
-uteknohwfc:
- @echo 'Making C-Kermit $(CKVER) for 4.2BSD/UTek, no h/w flow control'
- $(MAKE) wermit \
- "CFLAGS= -O -DLCKDIR -DBSD4 -DTCPSOCKET \
- -DUTEK -DDCLPOPEN -DLOCK_DIR=\\\"/usr/spool/uucp/LCK.\\\" \
- -DTRMBUFL=2048 $(KFLAGS)"
-
-#Tektronix XD88 with UTekV OS
-utekvr3:
- @echo 'Making C-Kermit $(CKVER) for Tektronix XD88 UTekV R3...'
- $(MAKE) wermit \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP \
- -DTCPSOCKET -DSYSUTIMEH -DCK_CURSES $(KFLAGS) -O" \
- "LIBS= -lcurses" "LNKFLAGS= -s"
-
-#Perkin-Elmer 3200 Xelos R02 or earlier
-ccop1:
- @echo 'Making C-Kermit $(CKVER) for Xelos & Public Domain Dirent calls'
- @echo 'or System V R2 or earlier...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -Dvoid=int -DDIRENT -DCK_CURSES \
- $(KFLAGS) -O" "LNKFLAGS =" "LIBS= -lcurses -ltermlib"
-
-#Encore, UMAX 4.3 (BSD) but without acucntrl program.
-encore:
- $(MAKE) "MAKE=$(MAKE)" umax43 "KFLAGS=$(KFLAGS)"
-
-#Encore, as above, but with curses file transfer display included.
-encorec:
- $(MAKE) "MAKE=$(MAKE)" umax43 "KFLAGS=-DCK_CURSES $(KFLAGS)" \
- "LIBS= -lcurses -ltermcap"
-
-#Encore, UMAX 4.3 (BSD) but without acucntrl program.
-umax43:
- @echo Making C-Kermit $(CKVER) for Encore UMAX 4.3...
- $(MAKE) "MAKE=$(MAKE)" PARALLEL=4 xermit \
- "CFLAGS= -DBSD43 -DENCORE -DTCPSOCKET $(KFLAGS) -O"
-
-#Encore, UMAX 4.2 (BSD)
-umax42:
- @echo Making C-Kermit $(CKVER) for Encore UMAX 4.2...
- $(MAKE) "MAKE=$(MAKE)" PARALLEL=4 xermit \
- "CFLAGS= -DBSD4 -DENCORE -DTCPSOCKET $(KFLAGS) -O"
-
-#Encore 88K UMAX 5.3 with TCP/IP support
-encore88k:
- @echo 'Making C-Kermit $(CKVER) for Encore 88K UMAX V, TCP/IP...'
- $(MAKE) xermit \
- "CFLAGS = -q ext=pcc -DSVR3 -DTCPSOCKET -DDIRENT \
- -DNOGETID_PROTOS -DHDBUUCP $(KFLAGS) -O" "LNKFLAGS ="
-
-#Encore 88K UMAX 5.3 with TCP/IP support
-encore88kgcc:
- @echo 'Making C-Kermit $(CKVER) for Encore 88K UMAX V, TCP/IP, gcc...'
- $(MAKE) xermit CC=gcc CC2=gcc \
- "CFLAGS = -DSVR3 -DTCPSOCKET -DDIRENT \
- -DNOGETID_PROTOS -DHDBUUCP $(KFLAGS) -O" "LNKFLAGS ="
-
-#SONY NEWS, NEWS-OS 4.01C
-sonynews:
- @echo Making C-Kermit $(CKVER) for SONY NEWS-OS 4.01C...
- $(MAKE) xermit "CFLAGS= -DBSD43 -DACUCNTRL -DTCPSOCKET -O"
-
-#Run Lint on this mess for selected versions.
-#These are pretty much obsolete since ANSI C / gcc.
-lintsun:
- @echo 'Running Lint on C-Kermit $(CKVER) sources for SunOS version...'
- lint -x -DSUNOS4 -DDIRENT -DTCPSOCKET -DSAVEDUID \
- ck[cu]*.c > ckuker.lint.sun
-
-lintbsd:
- @echo 'Running Lint on C-Kermit $(CKVER) sources for BSD 4.2 version..'
- lint -x -DBSD4 -DTCPSOCKET ck[cu]*.c > ckuker.lint.bsd42
-
-lints5:
- @echo 'Running Lint on C-Kermit $(CKVER) sources for Sys V version...'
- lint -x -DATTSV ck[cu]*.c > ckuker.lint.s5
-
-#Who remembers TECO?
-love:
- @echo 'Not war?'
projects / ckermit.git / commitdiff