; File CKERMOD.INI, Sample C-Kermit 7.0 customization file.
;
-; This file, which is ONLY A SAMPLE, should be called:
-;
-; .mykermrc (UNIX, OS-9, Aegis, BeBox, Plan 9)
-; CKERMOD.INI (VMS, OpenVMS, AOS/VS, OS/2, Amiga, Atari ST)
-; ckermod.ini (Stratus VOS)
-;
-; This file is executed automatically by the standard C-Kermit initialization
-; file, CKERMIT.INI (or .kermrc). This file is not executed by C-Kermit itself
-; unless the initialization file is not found.
-;
-; MODify this file to suit your needs and preferences, and install it in your
-; home directory. Or replace it entirely with a new file.
-;
-; The design of this sample customization file lets you fill in a section for
-; each different operating system where you run C-Kermit.
-;
-; In UNIX, if you give this file execute permission and make sure the top
-; line indicates the full path of the C-Kermit 7.0-or-later executable, you
-; can execute this file directly, as if it was a shell script, except it is
-; interpreted by Kermit rather than the shell. This lets you have as many
-; different startup files as you like, each suited to a particular purpose.
-;
-; Authors: Christine Gianone, Frank da Cruz, Jeffrey Altman,
-; The Kermit Project, Columbia University.
-; Creation: 23 November 1992 for C-Kermit 5A(188).
-; Modified: 30 June 1993 for edit 189.
-; 04 October 1994 for edit 190.
-; 17 April 1995 for edit 191.
-; 6 September 1996 for version 6.0, edit 192.
-; 1 January 2000 for version 7.0, edit 196.
-; 14 October 2001 for version 8.0, edit 200.
-
-ECHO
-ECHO Executing SAMPLE C-Kermit customization file \v(cmdfile) for \v(system)...
-ECHO { Please edit this file to reflect your needs and preferences.}
-ECHO
-;
-; ... and then remove the ECHO commands above.
-
-COMMENT - Settings that apply to all the systems I use:
-;
-set delay 1 ; I escape back quickly
-set dial display on ; I like to watch C-Kermit dial
-
-; Dialing locale and method
-;
-; SET DIAL COUNTRY-CODE 1 ; Uncomment and replace with yours
-; SET DIAL AREA-CODE 000 ; Uncomment and replace with yours
-; SET DIAL LD-PREFIX 1 ; Uncomment and replace with yours
-; SET DIAL INTL-PREFIX 011 ; Uncomment and replace with yours
-; SET DIAL METHOD TONE ; Uncomment and replace with PULSE if necessary
-; SET DIAL DIRECTORY ... ... ; List dialing directory files here
-
-if < \v(version) 600192 -
- stop 1 \v(cmdfile): C-Kermit 6.0.192 or later required.
-
-set take error on ; Make errors fatal temporarily
-check if ; Do we have an IF command?
-set take error off ; Yes we do, back to normal
-
-; The ON_EXIT macro is executed automatically when C-Kermit exits.
-; Define as desired.
-;
-define ON_EXIT echo Returning you to \v(system) now.
-
-; System-independent quick dialing macro. Depends on having the
-; macros MYMODEM, MYPORT, and (optionally) MYSPEED defined in the
-; system-dependent sections below.
-;
-define MYDIAL {
- if not defined MYMODEM end 1 {\%0: Modem type not defined.}
- set modem type \m(MYMODEM)
- if fail end 1 {\%0: \m(MYMODEM): Unsupported modem type.}
- if not defined MYPORT end 1 {\%0: Communication port not defined.}
- set port \m(MYPORT)
- if fail end 1 {\%0: SET PORT \m(MYPORT) failed.}
- if defined MYFLOW set flow \m(MYFLOW)
- if fail end 1 {\%0: SET FLOW \m(MYFLOW) failed.}
- if defined MYSPEED set speed \m(MYSPEED)
- if fail end 1 {\%0: SET SPEED \m(MYSPEED) failed.}
- dial \%1\%2\%3\%4\%5\%6\%7\%8\%9
- end \v(status)
-}
-
-forward \v(system) ; Go execute system-dependent commands
-
-:UNIX ; UNIX, all versions...
-define MYPORT /dev/cua ; My dialing environment
-define MYMODEM usr ; Replace these by what you actually have
-define MYSPEED 57600
-;
-; If you want all your downloads to go to the same directory, no matter
-; what your current directory is, uncomment and edit the following command:
-;
-; set file download-directory ~/download ; Download directory for UNIX
-
-; Put other UNIX-specific commands here...
-end ; End of UNIX section
-
-:VMS ; VMS and OpenVMS
-define MYPORT TXA0: ; My dialing environment
-define MYMODEM usr ; Replace these by what you actually have
-define MYSPEED 57600
-; set file download-directory [\$(USER).DOWNLOAD] ; Download directory for VMS
-; Put other VMS-specific commands here...
-end ; End of VMS section
-
-:WIN32 ; Windows and OS/2 customizations...
-:OS/2
-define MYPORT COM1 ; My dialing environment
-define MYMODEM usr ; Replace these by what you actually have
-define MYSPEED 57600
-set command byte 8 ; Use 8 bits between Kermit and console
-set xfer char latin1 ; Use Latin-1 for text file transfer
-set term char latin1 ; And use Latin-1 during CONNECT mode
-; set file download-directory C:\DOWNLOADS
-end
-
-:OS9/68K ; OS-9/68000
-define MYPORT /t3 ; My dialing environment
-define MYMODEM usr ; Replace these by what you actually have
-define MYSPEED 9600
-; set file download-directory ~/downloads
-end ; End of OS-9 section
-
-:AOS/VS ; Data General AOS/VS
-define MYPORT @con3 ; My dialing environment
-define MYMODEM usr ; Replace these by what you actually have
-define MYSPEED 9600
-; set file download-directory \v(home)DOWNLOADS
-end
-
-; And so on, you get the idea...
-; Fill in the sections that apply to you.
-
-:Stratus_VOS ; Stratus VOS
-:Amiga ; Commodore Amiga
-:Atari_ST ; Atari ST
-:Macintosh ; Apple Macintosh
-:unknown ; Others
-
-; (End of CKERMOD.INI)
+echo
+echo The very long standard initialization file that was distributed
+echo with C-Kermit 6, 7, and 8 is no longer recommended as "standard",
+echo since its features were little used. It is still available in
+echo the C-Kermit distribution as ockermod.ini.
+echo
projects / ckermit.git / blobdiff