# makefile / Makefile / ckuker.mak / CKUKER.MAK
#
-# Thu Jun 16 17:36:23 2011
-# Note: sources haven't changed since 20110615, only this file.
-BUILDID=20110615
+# Tue Jun 21 13:04:45 2011
+BUILDID=20110621
CKVER= "9.0.299"
-TESTID= "Beta.01"
+TESTID= "Beta.02"
#
# -- Makefile to build C-Kermit for UNIX and UNIX-like platforms --
#
#
# Author: Frank da Cruz, Columbia University
# 612 West 115th Street, New York NY 10025-7799, USA
-# E-mail: fdc@columbia.edu
-# Web: http://www.columbia.edu/kermit/
-# FTP: ftp://kermit.columbia.edu/kermit/
+# Email: fdc@columbia.edu
+# Web: http://kermit.columbia.edu/
+# FTP: ftp://kermit.columbia.edu/kermit/
#
# Note: Author is no longer at Columbia University or at the 115th Street
# address effective 1 July 2011. The email address should still work,
-# and the website and FTP addresses, for the foreseeable future.
+# as well as the website and FTP addresses, for the foreseeable future.
#
# Contributions from many others. Special thanks to Jeff Altman for the
# secure-build targets, Peter Eichhorn, assyst GmbH, for the consolidated
# separated by whitespace. Some versions of "make" understand these as
# directives. Uppercase letters remove the danger, e.g. "# If you have..."
#
-# WARNING: This is a huge makefile and it contains nested makes. Although
+# WARNING: This is a huge makefile. Although
# this is less likely since the turn of the century, some "make" programs
# might run out of memory. If this happens to you, edit away the parts that
# do not apply to your platform and try again.
#
+# WARNING 2: In many cases this file invokes itself recursively, sometimes
+# several levels deep (as in the Linux targets); i.e. some targets are used
+# as 'subroutines' of other targets, with parameters passed by setting
+# environment variables. For that reason, don't use 'make -e'.
+#
# Certain UNIX variations have their own separate makefiles:
-# . For 2.10 or 2.11 BSD on DEC PDP-11s, use ckubs2.mak.
+# . For 2.10 or 2.11 BSD on the DEC PDP-11, use ckubs2.mak.
# . For Plan 9, use ckpker.mk.
#
# Separate build procedures are provided non-UNIX platforms: VMS, VOS,
#
# Other targets:
# 'make install' is an installation script (read accompanying comments!).
+# 'make uninstall' undoes 'make install' (read accompanying comments!).
# 'make clean' removes intermediate and object files.
+# 'make show' tells the default include and lib paths for secure builds.
#
# IMPORTANT:
# For more detailed installation instructions, read the files ckuins.txt
#
# TARGETS FOR DIFFERENT UNIX PLATFORMS AND VERSIONS:
#
-# + Marks those that have been built successfully for C-Kermit 8.0 or later.
+# + Marks those that have been built successfully for C-Kermit 9.0 or later.
# - Those that once built OK but no longer do (e.g. too big).
# ? Those that worked in a previous version but have not been tested recently.
# --------------------------
# ? for Data General MV systems with DG/UX, ???
# ? for Data General MV systems with MV/UX, use AOS/VS C-Kermit (CKDKER.MAK)
# ? for Data General MV systems with AOS/VS, use CKDKER.MAK (last = C-K 7.0)
-# for DEC PDP-11 with Berkeley UNIX 2.x, see Berkeley UNIX 2.x.
+# ? for DEC PDP-11 with Berkeley UNIX 2.x, see Berkeley UNIX 2.x.
# ? for DEC PDP-11 with Mini-UNIX (Bell 6th Edition for PDP-11 with no MMU),
# probably no way to fit C-Kermit without I&D space.
# ? for DEC PDP-11 with Ultrix-11 3.x, ??? (probably needs overlays)
# ? for DEC Alpha with Digital UNIX 3.2, "make du32"
# ? for DEC Alpha with Digital UNIX 4.0-4.0D, "make du40" or "make du40gcc"
# ? for DEC Alpha with Digital UNIX 4.0E or higher, see Tru64.
+# + for DEC Alpha with any version of DU or OSF/1, "make dec-osf1"
# - for DEC Pro-350 with Pro/Venix V1.x, "make provx1" (version 5A is too big)
# ? for DEC Pro-380 with Pro/Venix V2.0 (Sys V), "make sys3" or "make sys3nid"
# ? for DEC Pro-380 with 2.9, 2.10, or 2.11 BSD, "make bsd29" or "make bsd210"
# ? for FreeBSD 3.x, "make freebsd3" (ncurses) or "make freebsd3c" (curses)
# ? for FreeBSD 4.0, "make freebsd40"
# ? for FreeBSD 4.1 or later, "make freebsd"
+# + NOTE: Just use "make freebsd" for any reasonably recent FreeBSD version.
# ? for Harris HCX-2900, "make sys5r3"
# ? for Harris Night Hawk 88K or 68K with CX/UX pre-6.1, "make sys5r3"
# ? for Harris Night Hawk 88K or 68K with CX/UX 6.1 or later, "make cx_ux"
# ? for Heurikon, "make sys3"
# ? for HP-3000, MPE/ix, "make posix"?
# ? for HP-9000 Series 300 with 4.4BSD, "make bsd44"
+
+# NOTE: Most of the HP-UX targets were tested successfully in 2010.
+# Verification needed for C-Kermit 9.0 Beta.01...
+
# ? for HP-9000 Series 500, HP-UX 5.21 and no networking "make hpux0500"
# ? for HP-9000 Series 500, HP-UX 5.21 with WIN/TCP 1.2 "make hpux0500wintcp"
# ? for HP-9000 Series, HP-UX 6.5, without long filenames,
# or if you have GNU CC, "make minix386gcc"
# ? for IBM PC family, 386-based, with MINIX 2.0, "make minix20"
# ? for IBM PC family, 386-based, with MINIX 3.0, "make minix3"
+# + for IBM PC family, 386-based, with MINIX 3.0, "make minix315"
# ? for IBM PS/2 with PS/2 AIX 1.0, 1.1, or 1.2, "make ps2aix" or ps2aixnetc.
# ? for IBM PS/2 with PS/2 AIX 1.3, "make ps2aix3"
# ? for IBM RISC System/6000 with AIX 3.0, "make aix30"
# ln /usr/include/sys/termiox.h /usr/include/termiox.h
# ? for NCR System 3000, NCR UNIX 02.02.01, same as above.
# ? for NCR MP-RAS System V R4 V2.03 or 3.02, "make mpras" or "make mprastcpc"
-# ? for NetBSD any version on any architecture, "make netbsd"
-# ? for NetBSD with SSL/TLS, SRP, and ZLIB, "make netbsd+ssl+srp+zlib"
+# + for NetBSD any version on any architecture, "make netbsd"
+# + for NetBSD with OpenSSL, "make netbsd+ssl"
# ? for NetBSD with ncurses specified instead of curses, "make netbsdn"
# ? for NetBSD with all curses support omitted, "make netbsdnc"
# ? for NeXT with NeXTSTEP 1.0 through 3.2, "make next" (on a NeXT)
# ? for Sequent Symmetry S81 with DYNIX 3.0.xx, "make dynix3"
# ? for Sequent DYNIX 3.1.xx, "make dynix31" or "make dynix31c"
# ? for Siemens/Nixdorf SINIX-L Intel V5.41, "make sinix541i"
-# ? for Siemens/Nixdorf SINIX-N MIPS V5.42, "make sinix542"
+# + for Siemens/Nixdorf SINIX-N MIPS V5.42, "make sinix542"
# ? for Siemens/Nixdorf SINIX-P MIPS V5.42 with gcc, "make sinix542g"
# ? for Siemens/Nixdorf SINIX-Z Intel V5.42, "make sinix542i"
# ? for Siemens/Nixdorf Reliant UNIX V5.43, "make sni543"
# or (for models without hardware flow control), "make uteknohwfc"
# ? for Tektronix XD88 series with UTekV OS, "make utekvr3"
# ? for Tri Star Flash Cache with Esix SVR3.2, "make sys5r3"
-# + for Tru64 UNIX 4.0E, "make tru64-40e"
-# + for Tru64 UNIX 4.0F, "make tru64-40f"
-# + for Tru64 UNIX 4.0G, "make tru64-40g"
-# + for Tru64 UNIX 5.0A, "make tru64-50a"
-# + for Tru64 UNIX 5.1A, "make tru64-51a"
-# + for Tru64 UNIX 5.1B, "make tru64-51b"
+# NOTE: The Tru64 builds have been failing since 2010, but "make dec-osf" is OK
+# ? for Tru64 UNIX 4.0E, "make tru64-40e"
+# ? for Tru64 UNIX 4.0F, "make tru64-40f"
+# ? for Tru64 UNIX 4.0G, "make tru64-40g"
+# ? for Tru64 UNIX 5.0A, "make tru64-50a"
+# ? for Tru64 UNIX 5.1A, "make tru64-51a"
+# ? for Tru64 UNIX 5.1B, "make tru64-51b"
# ? for Unistar, "make sys5"
# ? for Unisys S/4040 68040 CTIX SVR3.2 6.4.1, "make ctix" or "make sys5r3"
# ? for Unisys U5000 UNIX SVR3 6.x, "make sys5r3" or "make sys5r3c"
@echo SRPINC=$(SRPINC)
@echo SSLLIB=$(SSLLIB)
@echo SSLINC=$(SSLINC)
-
+ @exit
+
# Install C-Kermit after building -- IMPORTANT: Read the instructions above
# (SAMPLE INSTALLATION SCRIPT). For SSL/TLS versions, ca_certs.pem file
# should be installed in the appropriate place for your OpenSSL library, e.g.:
#FreeBSD 4.1 and above
#Like FreeBSD 4.0 but without the NONOSETBUF hack and with CK_NEWTERM.
-#OK 2009/11/17 FreeBSD 7.2-RELEASE
+#OK 2011/06/15 FreeBSD 3.3, 4,4, 4.7, and 8.2
freebsd freebsd41 freebsd72:
@echo 'Making C-Kermit $(CKVER) for FreeBSD 4.1 or later...'
$(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
"LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
#FreeBSD 5.0 or later with OpenSSL 0.9.7 or later.
-#OK 2009/11/17 FreeBSD 7.2-RELEASE
+#OK 2011/06/15 FreeBSD 4.7 and 8.2
freebsd+ssl freebsd+openssl freebsd50+openssl:
@echo 'Making C-Kermit $(CKVER) for FreeBSD 5.0, ncurses, openssl'
$(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
#then go to work/srp-x.y.z/libsrp and "bmake install". As of 2005Q3, the
#pkgsrc install only installed the statically linked client applications. You
#need to manually install the libraries to build your own applications.
+#NOT TESTED RECENTLY - probably needs work.
netbsd+ssl+srp+zlib:
@echo Making C-Kermit $(CKVER) for NetBSD with curses...
$(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
-DCK_DTRCD -DCK_DTRCTS -DTPUTSARGTYPE=int -DFNFLOAT $(KFLAGS) -O" \
"LIBS= -L/usr/pkg/lib -lncurses -lcrypt -lm -lutil $(LIBS)"
-#OpenBSD - All versions.
+#OpenBSD before 2.3.
#Uses ncurses as its curses so use -ltermlib, not -ltermcap
#But it doesn't use uu_lock() which was introduced in OpenBSD 2.3.
#For that use the next entry.
# Note: Mac OS X 10.5 and earlier are 32-bit; 10.6 and later 64-bit.
# Note 2: As of C-Kermit 9.0 -NOUUCP is included by default because
# Mac OS X doesn't support UUCP. To undo this, use KFLAGS=-UNOUUCP.
-#OK: 2009/11/16 (for 10.3.9, 10.4.11, 10.5.8, 10.6.1)
+#OK: 2011/06/14 (for 10.4.11, 10.5.8, 10.6.7)
macosx macosx10 macosx10.3.9 macosx10.4 macosx10.5 macosx10.6:
@MACOSNAME=`/usr/bin/sw_vers -productName`; \
MACOSV=`/usr/bin/sw_vers -productVersion`; \
# automatically based on the Mac OS X version number.
# See note about UUCP in previous target.
#OK: 2009/11/16 (for 10.3.9, 10.4.11, 10.5.8, 10.6.1)
+#OK: 2011/06/14 (for 10.4.11, 10.5.8, 10.6.7)
macosx+krb5+ssl macosx10.5+krb5+ssl macosx10.6+krb5+ssl \
macosx+krb5+openssl macosx10.5+krb5+openssl macosx10.6+krb5+openssl:
@MACOSNAME=`/usr/bin/sw_vers -productName`; \
# This one should work for any AIX 4.2 or later: "make aix".
# Other tags are for compatibility with old makefile targets.
-#OK: 2009/11/16
+#OK: 2011/06/11
aix aix42 aix43 aix44 aix45 aix50 aix51 aix52 aix53 aix54 aix61:
@echo Making C-Kermit $(CKVER) for IBM AIX...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
#
# To build with gcc use "make aix CC=gcc CC2=gcc", or "make aixg"
#
-#OK: 2009/11/16
+#OK: 2011/06/15
aix+ssl aix51+openssl aix52+openssl aix53+openssl:
@echo "Making C-Kermit $(CKVER) for IBM AIX with OpenSSL..."
@echo "SSLINC=$(SSLINC) SSLLIB=$(SSLLIB)"
#Solaris 9, 10, or 11 with SunPro CC
#Uses streams PTYs rather than BSD ptys as in C-Kermit 8.0 and earlier.
#This target is chained to by the secure targets below.
+#OK: 2011/06/15
solaris9 solaris10 solaris11:
@echo 'Making C-Kermit $(CKVER) for Solaris 9 or later with Sun CC'
@case `uname -r` in \
# chains to the solaris{9,10,11}g target but for some reason it doesn't work if
# you add the -DFORWARD_X option, thus the solaris9g+openssl+forward_x target.
#
-#OK: 2009/09/25 (but not tested on Solaris 11)
+#OK: 2020/06/15
solaris9g+ssl solaris10g+ssl solaris11g+ssl \
solaris9g+openssl solaris10g+openssl solaris11g+openssl:
@echo 'Making C-Kermit $(CKVER) for Solaris 9/10/11 with OpenSSL: gcc'
#other files) increase the '...' value in '-Wc,-Ns...'! The default maximum
#symbol table size (-Ns) is 2000 table entries. ckuus4.c from Mar 12 2010
#needs 2031 table entries (C-Kermit Version "9.0.299").
-#OK: 2020/03/24
+#OK: 2010/03/24
hpux0700sftcpc:
@$(MAKE) hpux-header
@echo 'supporting: NO long filenames, \c'
#On 64-bit platforms, it does no harm.
#As of 3 March 2009 we detect automatically if we have curses, ncurses,
#or no curses at all.
-#OK: 2009/11/16
#Added HAVE_LOCKDEV as openSuSE >= 11.3 uses ttylock directly instead of
#baudboy 2010/08/23
+#OK: 2011/06/18
linux:
@if test \
`grep grantpt /usr/include/*.h /usr/include/sys/*.h | wc -l` -gt 0; \
"LIBS=$(LIBS) $$HAVE_LIBCURSES \
`if test -n '$$HAVE_OPENPTY'; then echo -lutil; fi` \
`if test -f /usr/lib64/libresolv.a || test -f /usr/lib64/libresolv.so \
- || test -f /usr/lib/libresolv.a || test -f /usr/lib/libresolv.so; \
+ || test -f /usr/lib/libresolv.a || test -f /usr/lib/libresolv.so \
+ || ls /lib/x86_64-linux-gnu/libresolv.* > /dev/null 2> /dev/null; \
then echo -lresolv; fi` \
`if test -f /usr/lib64/libcrypt.a || test -f /usr/lib64/libcrypt.so \
- || test -f /usr/lib/libcrypt.a || test -f /usr/lib/libcrypt.so; \
+ || test -f /usr/lib/libcrypt.a || test -f /usr/lib/libcrypt.so \
+ || ls /lib/x86_64-linux-gnu/libcrypt.* > /dev/null 2> /dev/null; \
then echo -lcrypt; fi` \
`if test -f /usr/lib64/liblockdev.a || \
test -f /usr/lib64/liblockdev.so || \
then echo -llockdev; fi`" \
linuxa
+# Linux + Shadow passwords + PAM
+# OK 2011/06/18
+linux+shadow+pam:
+ @echo 'Making C-Kermit $(CKVER) for Linux+Shadow+PAM...'
+ $(MAKE) linux KTARGET=$${KTARGET:-$(@)} \
+ KFLAGS="-DCK_SHADOW -DCK_PAM $(KFLAGS)" \
+ "LNKFLAGS = $(LNKFLAGS)" \
+ "LIBS = -lpam"
+
+# Linux systems that have no <sys/select.h>.
+# (not tested in recent years, perhaps no longer needed)
+linuxns:
+ $(MAKE) linux KTARGET=$${KTARGET:-$(@)} KFLAGS=-DNO_SYS_SELECT_H
+
+# Linux-script-only:
+# A minimum-size version for Linux that does only scripting and
+# serial communication -- no networks, no file transfer, no security.
+# OK 2011/06/18
+linuxso:
+ $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
+ "CFLAGS = -O -DLINUX -pipe -funsigned-char -DPOSIX -DCK_POSIX_SIG \
+ -DLINUXFSSTND -DNOCOTFMC -DNOXFER -DNODEBUG -DNOCSETS -DNOHELP \
+ -DNONET -DMINIDIAL -DNOSCRIPT -DNOIKSD -DNOPUSH $(KFLAGS)" \
+ "LNKFLAGS = $(LNKFLAGS)" "LIBS = "
+
# Secure targets for Linux. These work on RHAS4, RHEL4, and RHEL5,
# unlike some of the older targets that follow. They hook into the main Linux
# target so we pick up all the other new stuff - large files, baudboy.h, the
# appropriate pty interface, etc.
-# Linux with Kerberos 5 (but not 4) and OpenSSL.
-# Note: -DOPENSSL_097 is necessary. Without it we use the wrong names
-# for the DES routines and the link step fails.
-# Note 2: In recent Red Hat releases libpam might be in /lib instead of in
-# /usr/lib. There should be symlinks in place but if not add them yourself.
-#OK: 2010/04/01
-
# Linux with Kerberos 5.
# Use "make linux+krb5 KFLAGS=-DNO_KRB5_INIT_ETS" if necessary.
-#OK 2011/06/14 on Fedora 14:
+#OK 2011/06/16 on Fedora 14 with:
# make linux+krb5 "LIBS=$LIBS /lib/libk5crypto.so.3 /lib/libcom_err.so.2"
# On RHEL5: make linux+krb5 -UCK_DES
linux+krb5:
else echo "NO DES"; \
fi; \
K5CRYPTO=''; \
- if ls /lib/libk5crypto* > /dev/null 2> /dev/null; then \
- K5CRYPTO='-lk5crypto'; \
- fi; \
+ if ls /lib/libk5crypto* > /dev/null 2> /dev/null; then \
+ K5CRYPTO='-lk5crypto'; \
+ else if ls /usr/lib64/libk5crypto* > /dev/null 2> /dev/null; then \
+ K5CRYPTO='-lk5crypto'; \
+ fi; fi; \
COM_ERR=''; \
if ls /lib/libcom_err* > /dev/null 2> /dev/null; then \
COM_ERR='-lcom_err'; \
fi; \
GSSAPILIB='-lgssapi'; \
- K5DIR=`echo $(K5LIB) | sed 's|-L||'`; \
- if ls $$K5DIR/libgssapi_krb5* > /dev/null 2> /dev/null; then \
+ if ls /lib/libgssapi_krb5* > /dev/null 2> /dev/null; then \
GSSAPILIB='-lgssapi_krb5'; \
- fi; \
+ else if ls /usr/lib/libgssapi_krb5* > /dev/null 2> /dev/null; then \
+ GSSAPILIB='-lgssapi_krb5'; \
+ else K5DIR=`echo $(K5LIB) | sed 's|-L||'`; \
+ if ls $$K5DIR/libgssapi_krb5* > /dev/null 2> /dev/null; then \
+ GSSAPILIB='-lgssapi_krb5'; \
+ fi; fi; fi; \
$(MAKE) linux KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"KFLAGS= -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 $$OPENSSLOPTION \
-DCK_ENCRYPTION $$HAVE_DES $(K5INC) $(K5INC)/krb5 \
-I/usr/include/et $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = $(K5LIB) $$DES_LIB -lcrypto $$GSSAPILIB -lkrb5 \
- $$K5CRYPTO $$COM_ERR $(LIBS)"
+ $$K5CRYPTO $$COM_ERR $(LIBS)" ; \
+ if [ ! -f ./wermit ] || [ ./ckcmai.o -nt ./wermit ] ; then \
+ echo ""; \
+ echo "If build failed try:"; \
+ echo ""; \
+ echo " make clean ; make $${KTARGET:-$(@)} KFLAGS=-UCK_DES"; \
+ echo ""; \
+ fi
+
+# Linux with Kerberos 5 and Kerberos 4.
+# Use "make linux+krb5 KFLAGS=-DNO_KRB5_INIT_ETS" if necessary.
+# Add "KFLAGS=-UCK_DES" if failure messages look DES-related.
+# UNTESTED (because I can't find a box with Krb4 and Krb5 installed)
+linux+krb5+krb4:
+ @echo 'Making C-Kermit for Linux with Kerberos 4 and Kerberos 5'
+ $(MAKE) linux+krb5 KTARGET=$${KTARGET:-$(@)} \
+ "KFLAGS=-DKRB4 -DKRB524 $(KFLAGS)" "LIBS=$(LIBS) -lkrb4"
# Linux with OpenSSL
# In Linux, SSL libs are often in /lib or /usr/lib and so found by default.
# There's a new warning at the end that should come out if this happens,
# and that should not come out if it didn't.
#
-linux+ssl linux+openssl:
+linux+ssl linux+openssl linux+openssl+zlib+shadow+pam linux+openssl+shadow:
@echo 'Making C-Kermit $(CKVER) for Linux+OpenSSL SSLLIB=$(SSLLIB)'
@case `openssl version` in \
*0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \
DES_LIB='-ldes425'; \
HAVE_DES='-DCK_DES -DLIBDES'; \
- echo "HAVE DES"; \
- else echo "NO DES"; \
+ echo "HAVE DES"; \
+ else echo "NO DES"; \
fi; \
$(MAKE) linux KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"KFLAGS= -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_CAST $$HAVE_DES \
-DCK_SSL -DCK_PAM -DZLIB -DCK_SHADOW $$OPENSSLOPTION $(SSLINC) \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SSLLIBS) -lssl $$DES_LIB -lcrypto -lpam -ldl -lz $(LIBS)"; \
- if [ ! -f ./wermit ] || [ ckcmai.o -nt ./wermit ]; then \
- echo ""; \
- echo "If build failed try:"; \
- echo ""; \
- echo " make clean ; make linux+ssl KFLAGS=-UCK_DES"; \
- echo ""; fi
+ "LIBS = $(SSLLIB) -lssl $$DES_LIB -lcrypto -lpam -ldl -lz $(LIBS)" ; \
+ if [ ! -f ./wermit ] || [ ./ckcmai.o -nt ./wermit ] ; then \
+ echo ""; \
+ echo "If build failed try:"; \
+ echo ""; \
+ echo " make clean ; make $${KTARGET:-$(@)} KFLAGS=-UCK_DES"; \
+ echo ""; \
+ fi
# Linux with Kerberos 5 and OpenSSL
# OK 2011/05/16
else echo "NO DES"; \
fi; \
K5CRYPTO=''; \
- if ls /lib/libk5crypto* > /dev/null 2> /dev/null; then \
- K5CRYPTO='-lk5crypto'; \
- fi; \
+ if ls /lib/libk5crypto* > /dev/null 2> /dev/null; then \
+ K5CRYPTO='-lk5crypto'; \
+ else if ls /usr/lib64/libk5crypto* > /dev/null 2> /dev/null; then \
+ K5CRYPTO='-lk5crypto'; \
+ fi; fi; \
COM_ERR=''; \
if ls /lib/libcom_err* > /dev/null 2> /dev/null; then \
COM_ERR='-lcom_err'; \
fi; \
GSSAPILIB='-lgssapi'; \
- K5DIR=`echo $(K5LIB) | sed 's|-L||'`; \
- echo K5DIR=$$K5DIR; \
- if ls $$K5DIR/libgssapi_krb5* > /dev/null 2> /dev/null; then \
+ if ls /lib/libgssapi_krb5* > /dev/null 2> /dev/null; then \
GSSAPILIB='-lgssapi_krb5'; \
- fi; \
+ else if ls /usr/lib/libgssapi_krb5* > /dev/null 2> /dev/null; then \
+ GSSAPILIB='-lgssapi_krb5'; \
+ else K5DIR=`echo $(K5LIB) | sed 's|-L||'`; \
+ if ls $$K5DIR/libgssapi_krb5* > /dev/null 2> /dev/null; then \
+ GSSAPILIB='-lgssapi_krb5'; \
+ fi; fi; fi; \
$(MAKE) linux KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"KFLAGS= -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 \
-DCK_SSL -DCK_PAM -DZLIB -DCK_SHADOW $$OPENSSLOPTION $(SSLINC) \
-DCK_ENCRYPTION $$HAVE_DES $(K5INC) $(K5INC)/krb5 \
-I/usr/include/et $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIBS) -lssl $$DES_LIB -lpam -lz \
- -lcrypto $$GSSAPILIB_krb5 -lkrb5 $$K5CRYPTO $$COM_ERR $(LIBS)" \
- if [ ! -f ./wermit ] || [ ckcmai.o -nt ./wermit ]; then \
- echo ""; \
- echo "If build failed try:"; \
- echo ""; \
- echo " make clean ; make linux+ssl KFLAGS=-UCK_DES"; \
- echo ""; fi
-
-#Linux configured for SSL/TLS, ZLIB, PAM and Shadow Passwords
-#OK: 2009/11/17
-linux+openssl+zlib+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SSL/TLS...'
- $(MAKE) linux KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "KFLAGS = -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DZLIB -DOPENSSL_097 \
- -DCK_SHADOW $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS= $(SSLLIB) -lssl -lcrypto -lz -lpam -ldl $(LIBS)"
-
-# As above but for Linux systems that have no <sys/select.h>.
-linuxns:
- $(MAKE) linux KTARGET=$${KTARGET:-$(@)} KFLAGS=-DNO_SYS_SELECT_H
+ "LIBS = $(K5LIB) $(SSLLIB) -lssl $$DES_LIB -lpam -lz \
+ -lcrypto $$GSSAPILIB -lkrb5 $$K5CRYPTO $$COM_ERR $(LIBS)" ; \
+ if [ ! -f ./wermit ] || [ ./ckcmai.o -nt ./wermit ] ; then \
+ echo ""; \
+ echo "If build failed try:"; \
+ echo ""; \
+ echo " make clean ; make $${KTARGET:-$(@)} KFLAGS=-UCK_DES"; \
+ echo ""; \
+ fi
-# A minimum-size version for Linux that does only scripting and
-# serial communication -- no networks, no file transfer.
-linuxso:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -DLINUX -pipe -funsigned-char -DPOSIX -DCK_POSIX_SIG \
- -DLINUXFSSTND -DNOCOTFMC -DNOXFER -DNODEBUG -DNOCSETS -DNOHELP \
- -DNONET -DMINIDIAL -DNOSCRIPT -DNOIKSD -DNOPUSH $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" "LIBS = "
+# ::BEGIN_OLD_LINUX_TARGETS::
-# The remaining Linux entries are for special or customized builds. They
-# have not been generalized like the ones above. Ideally, we should allow
-# for every combination of libc vs glibc, gcc vs egcs, curses vs ncurses,
-# Kerberos IV vs Kerberos V vs SRP (in any combination), and so on. The
-# best way to do this is simply to set KFLAGS and LIBS values and then
-# chain to the main "linux" target, as in the examples just above.
+# The remaining Linux entries are for special or customized builds. They have
+# not been generalized ("subroutinized") like the ones above. Ideally, we
+# should allow for every combination of libc vs glibc, gcc vs egcs, curses vs
+# ncurses, Kerberos IV vs Kerberos V vs SRP (in any combination), and so on.
+# The best way to do this is to set KFLAGS and LIBS values and then chain to
+# the main "linux" target, as in the examples just above. To skip past all of
+# these old targets (and there are many) search for ::END_OLD_LINUX_TARGETS::
+# (after this line).
#Sharp Zaurus SL-5500 - Linux based
zsl5500:
"LIBS = $(K5LIB) -lncurses -ltermcap -ldes425 -lkrb5 \
-lcom_err -lk5crypto -lgssapi_krb5 -lcrypt -lresolv"
-#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.1 with K4 compatibility.
-#
-# Requires the Kerberos 1.2.1 be compiled with KRB4 compatibility.
-linux+krb5+krb4:
- @echo 'Making C-Kermit $(CKVER) for Linux on Intel with Kerberos...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_DES -DCK_CURSES -DCK_POSIX_SIG \
- -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H $(K5INC) $(K5INC)/krb5 \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) -lncurses -ltermcap -lkrb4 -ldes425 -lkrb5 \
- -lcom_err -lk5crypto -lcrypt -lgssapi_krb5 -lresolv"
-
# Linux on Intel PC with SRP 1.7.4 using GNU MP, Krypto, and Eric Young's
# DES library. Remove the -DCK_DES, -DLIBDES and -ldes if you do not have
# Eric Young's# libdes.a installed.
"LIBS = $(SRPLIB) $(SSLLIB) -lncurses -ltermcap -lsrp -lkrypto \
-lcrypto -lcrypt -lpam -ldl -lm -lresolv"
-linux+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with Shadow+PAM...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_SHADOW -DCK_PAM -DFNFLOAT \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = -lncurses -ltermcap -lcrypt -lpam -ldl -lm -lresolv"
-
-#Linux configured for SSL/TLS.
-#Remove -ltermcap if it causes trouble e.g. in Debian 2.2.
-#If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-oldlinux+openssl:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SSL/TLS...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SSL \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DFNFLOAT $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS= $(SSLLIB) \
- -lncurses -ltermcap -lssl -lcrypto -lm -lresolv -lcrypt"
-
-#Linux configured for SSL/TLS and Shadow Passwords
-#Remove -ltermcap if it causes trouble e.g. in Debian 2.2.
-#If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
-linux+openssl+shadow:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SSL/TLS...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SSL \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DFNFLOAT -DCK_SHADOW $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS= $(SSLLIB) \
- -lncurses -ltermcap -lssl -lcrypto -lm -lresolv -lcrypt"
-
#Linux on Intel PC with SRP and SSL/TLS.
#
# libsrp.a should be build with OpenSSL
"CFLAGS = -O -DLINUX -DPOSIX -DCK_CURSES -DCK_POSIX_SIG -DNOLEARN \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap"
+# ::END_OLD_LINUX_TARGETS::
+
# LynxOS 2.2 with GCC compiler, TCP/IP and fullscreen display.
# Probably also works with Lynx 2.1, and maybe even Lynx 2.0.
# -X means use termios serial drivers rather than BSD4.3-style sgtty drivers.
#Use -M3 to generate 32-bit i386 code instead of 16-bit segmented i286 code.
#Use -Me to enable MS nonstandard keywords in system headers.
#Use -W2 or W3 to increase the warning level.
+#OK: 2011/06/15
sco234:
@echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
-b elf -DPOSIX $(KFLAGS)"
#SCO OpenServer 6 (new target 30 Jan 2006)
-sco_osr600:
+sco_osr600 sco600:
@echo Making C-Kermit $(CKVER) for SCO OpenServer 6.0.0...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
# @rm use.qnx
#
# If you get warnings about HEADER or C_IN add -DNO_DNS_SRV.
+# OK 2011/06/14
qnx32:
@echo 'Making C-Kermit $(CKVER) for QNX 4.2x, 32-bit...'
$(MAKE) xermit \
projects / ckermit.git / blobdiff