5 /* C K U U S 2 -- User interface strings & help text module for C-Kermit */
9 Frank da Cruz <fdc@columbia.edu>,
10 The Kermit Project, Columbia University, New York City
11 Jeffrey E Altman <jaltman@secure-endpoints.com>
12 Secure Endpoints Inc., New York City
14 Copyright (C) 1985, 2004,
15 Trustees of Columbia University in the City of New York.
16 All rights reserved. See the C-Kermit COPYING.TXT file or the
17 copyright text in the ckcmai.c module for disclaimer and permissions.
19 This module contains HELP command and other long text strings.
21 IMPORTANT: Character string constants longer than about 250 are not portable.
22 Longer strings should be broken up into arrays of strings and accessed with
23 hmsga() rather than hmsg().
41 #define INCL_DOSDEVICES
42 #include <os2.h> /* This pulls in a whole load of stuff */
50 extern xx_strp xxstring;
51 extern char * ccntab[];
53 hlptok contains the string for which the user requested help. This is
54 useful for distinguishing synonyms, in case different help text is needed
55 depending on which synonym was given.
67 extern char *cmdbuf, *atmbuf;
69 extern char cmdbuf[], atmbuf[];
74 extern int nrmt, nprm, dfloc, local, parity, escape;
75 extern int turn, flow;
76 extern int binary, quiet, keep;
77 extern int success, xaskmore;
79 extern int tt_rows[], tt_cols[];
81 extern int tt_rows, tt_cols;
83 extern int cmd_rows, cmd_cols;
86 extern char *dftty, *versio, *ckxsys;
88 extern char *helpfile;
90 extern struct keytab prmtab[];
92 extern struct keytab remcmd[];
97 /* Interactive help strings */
99 /* Top-level HELP text. IMPORTANT: Also see tophlpi[] for IKSD. */
101 static char *tophlp[] = {
102 "Trustees of Columbia University in the City of New York.\n",
105 " Type EXIT to exit.",
107 " Type INTRO for a brief introduction to the Kermit Command screen.",
108 " Type LICENSE to see the Kermit 95 license.",
110 " Type INTRO for a brief introduction to C-Kermit.",
111 " Type LICENSE to see the C-Kermit license.",
113 " Type HELP followed by a command name for help about a specific command.",
116 " Type MANUAL to access the C-Kermit manual page.",
119 " Type MANUAL to access the C-Kermit help topic.",
122 " Type MANUAL to access the K95 manual.",
124 " Type MANUAL to access the C-Kermit manual.",
129 " Type NEWS for news about new features.",
130 " Type SUPPORT to learn how to get technical support.",
131 " Press ? (question mark) at the prompt, or anywhere within a command,",
132 " for a menu (context-sensitive help, menu on demand).",
134 "Press ? for a list of commands; see documentation for detailed descriptions.",
140 " Type HELP OPTIONS for help with command-line options.",
146 "Documentation for Command Window: \"Using C-Kermit\" by Frank da Cruz and",
147 "Christine M. Gianone, Digital Press, 1997, ISBN: 1-55558-164-1. To order,",
148 "call +1 212 854-3703 or +1 800 366-2665.",
150 "DOCUMENTATION: \"Using C-Kermit\" by Frank da Cruz and Christine M. Gianone,",
151 "2nd Edition, Digital Press / Butterworth-Heinemann 1997, ISBN 1-55558-164-1,",
152 "plus supplements at http://www.columbia.edu/kermit/ckermit.html.",
157 "Also see the Mac Kermit Doc and Bwr files on the Mac Kermit diskette.\n",
161 "See the files in /usr/share/lib/kermit/ for additional information.",
168 static char *tophlpi[] = { /* Top-level help for IKSD */
170 "Trustees of Columbia University in the City of New York.\n",
173 " Type INTRO for a brief introduction to Kermit commands.",
174 " Type VERSION for version and copyright information.",
175 " Type HELP followed by a command name for help about a specific command.",
176 " Type SUPPORT to learn how to get technical support.",
177 " Type LOGOUT (or EXIT) to log out.",
178 " Press ? (question mark) at the prompt, or anywhere within a command,",
179 " for a menu (context-sensitive help, menu on demand).",
181 "Press ? for a list of commands; see documentation for detailed descriptions.",
184 "DOCUMENTATION: \"Using C-Kermit\" by Frank da Cruz and Christine M. Gianone,",
185 "2nd Edition, Digital Press / Butterworth-Heinemann 1997, ISBN 1-55558-164-1.",
186 "To order: +1 212 854-3703 or +1 800 366-2665. More info at the Kermit",
188 "Project website, http://www.columbia.edu/kermit/.",
196 "Welcome to Kermit 95 2.1.3. Major new features include:",
198 "Welcome to C-Kermit 8.0.206. Major new features include:",
202 " . Runs in GUI window",
204 " . GUI version available",
208 " . New built-in SSH v1 and v2 clients",
209 #endif /* SSHBUILTIN */
211 " . A new built-in FTP client",
214 " . A new HTTP 1.1 client",
217 " . Telnet Com Port Option for dialing from Telnet modem servers",
218 #endif /* TN_COMPORT */
219 " . File scanning for automatic text/binary determination",
222 " . Learned scripts",
227 " . LISP-like S-Expressions and natural floating-point arithmetic",
229 " . Lots of script programming improvements",
231 " . Performance improvements and bug fixes",
234 " 1. \"Using C-Kermit\", second edition (1997), current with C-Kermit 6.0.",
235 " 2. http://www.columbia.edu/kermit/ckermit70.html",
236 " which documents the new features of C-Kermit 7.0.",
237 " 3. http://www.columbia.edu/kermit/ckermit80.html",
238 " which documents the new features of C-Kermit 8.0.",
240 "If the release date shown by the VERSION command is long past, be sure to",
241 "check with the Kermit Project to see if there have been updates.",
249 "Welcome to K-95, Kermit communications software for:",
253 "Welcome to HP-UX C-Kermit communications software for:",
255 "Welcome to UNIX C-Kermit communications software for:",
259 "Welcome to VMS C-Kermit communications software for:",
262 "Welcome to VOS C-Kermit communications software for:",
265 "Welcome to Mac Kermit communications software for:",
267 "Welcome to C-Kermit communications software for:",
274 " . Error-free and efficient file transfer",
278 " . VT320/220/102/100/52, ANSI, Wyse, Linux, Televideo, and other emulations",
281 " . VT220 terminal emulation",
283 " . Terminal connection",
288 " . Script programming",
291 " . International character set conversion",
295 " . Numeric and alphanumeric paging",
302 " . Serial connections, direct or dialed.",
304 " . Automatic modem dialing",
307 " . TCP/IP network connections:",
309 " - Telnet sessions",
312 " - SSH v1 and v2 connections",
315 " - SSH connections via external agent",
317 #endif /* SSHBUILTIN */
319 " - Rlogin sessions",
320 #endif /* RLOGCODE */
325 " - HTTP 1.1 sessions",
328 " - Internet Kermit Service",
330 #endif /* TCPSOCKET */
332 " . X.25 network connections",
336 " . DECnet/PATHWORKS LAT Ethernet connections",
339 " . Meridian Technologies' SuperLAT connections",
340 #endif /* SUPERLAT */
342 " . Named-pipe connections",
345 " . NETBIOS connections",
346 #endif /* CK_NETBIOS */
351 "While typing commands, you may use the following special characters:",
352 " . DEL, RUBOUT, BACKSPACE, CTRL-H: Delete the most recent character typed.",
353 " . CTRL-W: Delete the most recent word typed.",
354 " . CTRL-U: Delete the current line.",
355 " . CTRL-R: Redisplay the current line.",
359 " . Uparrow: Command recall - go backwards in command recall buffer.",
360 " . Downarrow: Command recall - go forward in command recall buffer.",
362 " (Note: Arrow keys can be used only on the PC's physical keyboard.)",
365 " . CTRL-P: Command recall - go backwards in command recall buffer.",
366 " . CTRL-B: Command recall - same as Ctrl-P.",
367 " . CTRL-N: Command recall - go forward in command recall buffer.",
368 #endif /* CK_RECALL */
370 " . ? (question mark) Display a menu for the current command field."
372 " . ESC (or TAB) Attempt to complete the current field.",
373 " . \\ (backslash) include the following character literally",
375 " or introduce a backslash code, variable, or function.",
377 " or introduce a numeric backslash code.",
381 "IMPORTANT: Since backslash (\\) is Kermit's command-line escape character,",
382 "you must enter DOS, Windows, or OS/2 pathnames using either forward slash (/)"
384 "or double backslash (\\\\) as the directory separator in most contexts.",
385 "Examples: C:/TMP/README.TXT, C:\\\\TMP\\\\README.TXT.",
388 "Command words other than filenames can be abbreviated in most contexts.",
392 " EXIT Exit from Kermit",
393 " HELP Request general help",
394 " HELP command Request help about the given command",
395 " TAKE Execute commands from a file",
396 " TYPE Display a file on your screen",
397 " ORIENTATION Explains directory structure",
401 "Commands for file transfer:",
403 " RECEIVE Receive files",
404 " GET Get files from a Kermit server",
406 " RESEND Recover an interrupted send",
407 " REGET Recover an interrupted get from a server",
408 #endif /* CK_RESEND */
410 " SERVER Be a Kermit server",
411 #endif /* NOSERVER */
413 "File-transfer speed selection:",
414 " FAST Use fast settings -- THIS IS THE DEFAULT",
415 " CAUTIOUS Use slower, more cautious settings",
416 " ROBUST Use extremely slow and cautious settings",
418 "File-transfer performance fine tuning:",
419 " SET RECEIVE PACKET-LENGTH Kermit packet size",
420 " SET WINDOW Number of sliding window slots",
421 " SET PREFIXING Amount of control-character prefixing",
426 "To make a direct serial connection:",
430 " SET PORT TAPI Select TAPI communication device",
432 " SET PORT Select serial communication device",
434 " SET PORT Select serial communication port or server",
437 " SET LINE Select serial communication device",
439 " SET SPEED Select communication speed",
440 " SET PARITY Communications parity (if necessary)",
442 " SET FLOW Communications flow control, such as RTS/CTS",
444 " SET FLOW Communications flow control, such as XON/XOFF",
445 #endif /* CK_RTSCTS */
446 " CONNECT Begin terminal connection",
450 "To dial out with a modem:",
451 " SET DIAL DIRECTORY Specify dialing directory file (optional)",
452 " SET DIAL COUNTRY-CODE Country you are dialing from (*)",
453 " SET DIAL AREA-CODE Area-code you are dialing from (*)",
454 " LOOKUP Lookup entries in your dialing directory (*)",
455 " SET MODEM TYPE Select modem type",
459 " SET PORT TAPI Select TAPI communication device",
461 " SET PORT Select serial communication device",
463 " SET PORT Select serial communication port or server",
466 " SET LINE Select serial communication device",
468 " SET SPEED Select communication speed",
469 " SET PARITY Communications parity (if necessary)",
470 " DIAL Dial the phone number",
471 " CONNECT Begin terminal connection",
474 "Further info: HELP DIAL, HELP SET MODEM, HELP SET PORT, HELP SET DIAL",
476 "Further info: HELP DIAL, HELP SET MODEM, HELP SET LINE, HELP SET DIAL",
478 "(*) (For use with optional dialing directory)",
483 "To make a network connection:",
485 " SET NETWORK DIRECTORY Specify a network services directory (optional)",
486 " LOOKUP Lookup entries in your network directory",
488 " SET NETWORK TYPE Select network type (if more than one available)",
489 " SET HOST Make a network connection but stay in command mode",
490 " CONNECT Begin terminal connection",
492 " TELNET Select a Telnet host and CONNECT to it",
495 " RLOGIN Select an Rlogin host and CONNECT to it",
496 #endif /* RLOGCODE */
498 " SSH [ OPEN ] Select an SSH host and CONNECT to it",
501 " FTP [ OPEN ] Make an FTP connection",
504 " HTTP OPEN Make an HTTP connection",
510 "To return from the terminal window to the K-95> prompt:",
514 "To return from the terminal window to the K/2> prompt:",
517 "To return from a terminal connection to the C-Kermit prompt:",
522 Press the key or key-combination shown after \"Command:\" in the status line",
523 " (such as Alt-x) or type your escape character followed by the letter C.",
525 " Type your escape character followed by the letter C.",
528 "To display your escape character:",
531 "To display other settings:",
532 " SHOW COMMUNICATIONS, SHOW TERMINAL, SHOW FILE, SHOW PROTOCOL, etc.",
535 "To display settings:",
536 " SHOW COMMUNICATIONS, SHOW FILE, SHOW PROTOCOL, etc.",
540 "For a Kermit 95 tutorial, visit:",
541 " http://www.columbia.edu/kermit/k95tutor.html",
544 "For a C-Kermit tutorial, visit:",
545 " http://www.columbia.edu/kermit/ckututor.html",
547 "To learn about script programming and automation:",
548 " Read the manual, \"Using C-Kermit\". For a brief tutorial, visit:",
549 " http://www.columbia.edu/kermit/ckscripts.html",
551 "For further information about a particular command, type HELP xxx,",
552 "where xxx is the name of the command. For documentation, news of new",
553 "releases, and information about other Kermit software, contact:",
555 " The Kermit Project E-mail: kermit@columbia.edu",
556 " Columbia University Web: http://www.columbia.edu/kermit/",
557 " 612 West 115th Street Voice: +1 (212) 854-3703",
558 " New York NY 10025-7799 Fax: +1 (212) 662-6442",
563 static char * hmxymatch[] = {
564 "SET MATCH { DOTFILE, FIFO } { ON, OFF }",
565 " Tells whether wildcards should match dotfiles (files whose names begin",
566 " with period) or UNIX FIFO special files. MATCH FIFO default is OFF.",
567 " MATCH DOTFILE default is OFF in UNIX, ON elsewhere.",
573 static char * hmxygui[] = {
574 "SET GUI DIALOGS { ON, OFF }",
575 " ON means that popups, alerts, use GUI dialogs; OFF means to use",
576 " text-mode popups or prompts. ON by default.",
578 "SET GUI FONT name size",
579 " Chooses the font and size. Type \"set gui font ?\" to see the list of",
580 " choices. The size can be a whole number or can contain a decimal point",
581 " and a fraction (which is rounded to the nearest half point).",
583 "SET GUI RGBCOLOR colorname redvalue greenvalue bluevalue",
584 " Specifies the red-green-blue mixture to be used to render the given",
585 " color name. Type \"set gui rgbcolor\" to see a list of colornames.",
586 " the RGB values are whole numbers from 0 to 255.",
588 "SET GUI WINDOW POSITION x y",
589 " Moves the K95 window to the given X,Y coordinates, pixels from top left.",
590 " (Not yet implemented -- use command-line options to do this.)",
592 "SET GUI WINDOW RESIZE-MODE { CHANGE-DIMENSIONS, SCALE-FONT }",
593 " Default is CHANGE-DIMENSIONS.",
595 "SET GUI WINDOW RUN-MODE { MAXIMIZE, MINIMIZE, RESTORE }",
596 " Changes the run mode state of the GUI window.",
603 static char * hmxxssh[] = {
605 "Syntax: SSH { ADD, AGENT, CLEAR, KEY, [ OPEN ], V2 } operands...",
606 " Performs an SSH-related action, depending on the keyword that follows:",
608 "SSH ADD LOCAL-PORT-FORWARD local-port host port",
609 " Adds a port forwarding triplet to the local port forwarding list.",
610 " The triplet specifies a local port to be forwarded and the hostname /",
611 " ip-address and port number to which the port should be forwarded from",
612 " the remote host. Port forwarding is activated at connection",
613 " establishment and continues until the connection is terminated.",
615 "SSH ADD REMOTE-PORT-FORWARD remote-port host port",
616 " Adds a port forwarding triplet to the remote port forwarding list.",
617 " The triplet specifies a remote port to be forwarded and the",
618 " hostname/ip-address and port number to which the port should be",
619 " forwarded from the local machine. Port forwarding is activated at",
620 " connection establishment and continues until the connection is",
623 "SSH AGENT ADD [ identity-file ]",
624 " Adds the contents of the identity-file (if any) to the SSH AGENT",
625 " private key cache. If no identity-file is specified, all files",
626 " specified with SET SSH IDENTITY-FILE are added to the cache.",
628 "SSH AGENT DELETE [ identity-file ]",
629 " Deletes the contents of the identity-file (if any) from the SSH AGENT",
630 " private key cache. If no identity-file is specified, all files",
631 " specified with SET SSH IDENTITY-FILE are deleted from the cache.",
633 "SSH AGENT LIST [ /FINGERPRINT ]",
634 " Lists the contents of the SSH AGENT private key cache. If /FINGERPRINT",
635 " is specified, the fingerprint of the private keys are displayed instead",
638 "SSH CLEAR LOCAL-PORT-FORWARD",
639 " Clears the local port forwarding list.",
641 "SSH CLEAR REMOTE-PORT-FORWARD",
642 " Clears the remote port forwarding list.",
645 " The SSH KEY commands create and manage public and private key pairs",
646 " (identities). There are three forms of SSH keys. Each key pair is",
647 " stored in its own set of files:",
649 " Key Type Private Key File Public Key File",
650 " v1 RSA keys \\v(appdata)ssh/identity \\v(appdata)ssh/identity.pub",
651 " v2 RSA keys \\v(appdata)ssh/id_rsa \\v(appdata)ssh/id_rsa.pub",
652 " v2 DSA keys \\v(appdata)ssh/id_dsa \\v(appdata)ssh/id_dsa.pub",
654 " Keys are stored using the OpenSSH keyfile format. The private key",
655 " files can be (optionally) protected by specifying a passphrase. A",
656 " passphrase is a longer version of a password. English text provides",
657 " no more than 2 bits of key data per character. 56-bit keys can be",
658 " broken by a brute force attack in approximately 24 hours. When used,",
659 " private key files should therefore be protected by a passphrase of at",
660 " least 40 characters (about 80 bits).",
662 " To install a public key file on the host, you must transfer the file",
663 " to the host and append it to your \"authorized_keys\" file. The file",
664 " permissions must be 600 (or equivalent).",
666 "SSH KEY CHANGE-PASSPHRASE [ /NEW-PASSPHRASE:passphrase",
667 " /OLD-PASSPHRASE:passphrase ] filename",
668 " This re-encrypts the specified private key file with a new passphrase.",
669 " The old passphrase is required. If the passphrases (and filename) are",
670 " not provided Kermit prompts your for them.",
672 "SSH KEY CREATE [ /BITS:bits /PASSPHRASE:passphrase",
673 " /TYPE:{ V1-RSA, V2-DSA, V2-RSA } /V1-RSA-COMMENT:comment ] filename",
674 " This command creates a new private/public key pair. The defaults are:",
675 " BITS:1024 and TYPE:V2-RSA. The filename is the name of the private",
676 " key file. The public key is created with the same name with .pub",
677 " appended to it. If a filename is not specified Kermit prompts you for",
678 " it. V1 RSA key files may have an optional comment, which is ignored",
679 " for other key types.",
681 "SSH KEY DISPLAY [ /FORMAT:{FINGERPRINT,IETF,OPENSSH,SSH.COM} ] filename",
682 " This command displays the contents of a public or private key file.",
683 " The default format is OPENSSH.",
685 "SSH KEY V1 SET-COMMENT filename comment",
686 " This command replaces the comment associated with a V1 RSA key file.",
688 "SSH [ OPEN ] host [ port ] [ /COMMAND:command /USER:username",
689 " /PASSWORD:pwd /VERSION:{ 1, 2 } /X11-FORWARDING:{ ON, OFF } ]",
690 " This command establishes a new connection using SSH version 1 or",
691 " version 2 protocol. The connection is made to the specified host on",
692 " the SSH port (you can override the port by including a port name or",
693 " number after the host name). Once the connection is established the",
694 " authentication negotiations begin. If the authentication is accepted,",
695 " the local and remote port forwarding lists are used to establish the",
696 " desired connections. If X11 Forwarding is active, this results in a",
697 " remote port forwarding between the X11 clients on the remote host and",
698 " X11 Server on the local machine. If a /COMMAND is provided, the",
699 " command is executed on the remote host in place of your default shell.",
701 " An example of a /COMMAND to execute C-Kermit in SERVER mode is:",
702 " SSH OPEN hostname /COMMAND:{kermit -x -l 0}",
705 " Requests that an existing SSH V2 connection generate new session keys.",
706 #else /* SSHBUILTIN */
707 "Syntax: SSH [ options ] <hostname> [ command ]",
708 " Makes an SSH connection using the external ssh program via the SET SSH",
709 " COMMAND string, which is \"ssh -e none\" by default. Options for the",
710 " external ssh program may be included. If the hostname is followed by a",
711 " command, the command is executed on the host instead of an interactive",
713 #endif /* SSHBUILTIN */
717 static char *hmxyssh[] = {
719 "SET SSH AGENT-FORWARDING { ON, OFF }",
720 " If an authentication agent is in use, setting this value to ON",
721 " results in the connection to the agent being forwarded to the remote",
722 " computer. The default is OFF.",
724 "SET SSH CHECK-HOST-IP { ON, OFF }",
725 " Specifies whether the remote host's ip-address should be checked",
726 " against the matching host key in the known_hosts file. This can be",
727 " used to determine if the host key changed as a result of DNS spoofing.",
728 " The default is ON.",
730 "SET SSH COMPRESSION { ON, OFF }",
731 " Specifies whether compression will be used. The default is ON.",
733 "SET SSH DYNAMIC-FORWARDING { ON, OFF }",
734 " Specifies whether Kermit is to act as a SOCKS4 service on port 1080",
735 " when connected to a remote host via SSH. When Kermit acts as a SOCKS4",
736 " service, it accepts connection requests and forwards the connections",
737 " through the remote host. The default is OFF.",
739 "SET SSH GATEWAY-PORTS { ON, OFF }",
740 " Specifies whether Kermit should act as a gateway for forwarded",
741 " connections received from the remote host. The default is OFF.",
743 "SET SSH GSSAPI DELEGATE-CREDENTIALS { ON, OFF }",
744 " Specifies whether Kermit should delegate GSSAPI credentials to ",
745 " the remote host after authentication. Delegating credentials allows",
746 " the credentials to be used from the remote host. The default is OFF.",
748 "SET SSH HEARTBEAT-INTERVAL <seconds>",
749 " Specifies a number of seconds of idle time after which an IGNORE",
750 " message will be sent to the server. This pulse is useful for",
751 " maintaining connections through HTTP Proxy servers and Network",
752 " Address Translators. The default is OFF (0 seconds).",
754 "SET SSH IDENTITY-FILE filename [ filename [ ... ] ]",
755 " Specifies one or more files from which the user's authorization",
756 " identities (private keys) are to be read when using public key",
757 " authorization. These are files used in addition to the default files:",
759 " \\v(appdata)ssh/identity V1 RSA",
760 " \\v(appdata)ssh/id_rsa V2 RSA",
761 " \\v(appdata)ssh/id_dsa V2 DSA",
763 "SET SSH KERBEROS4 TGT-PASSING { ON, OFF }",
764 " Specifies whether Kermit should forward Kerberos 4 TGTs to the host.",
765 " The default is OFF.",
767 "SET SSH KERBEROS5 TGT-PASSING { ON, OFF }",
768 " Specifies whether Kermit should forward Kerberos 5 TGTs to to the",
769 " host. The default is OFF.",
771 "SET SSH PRIVILEGED-PORT { ON, OFF }",
772 " Specifies whether a privileged port (less than 1024) should be used",
773 " when connecting to the host. Privileged ports are not required except",
774 " when using SSH V1 with Rhosts or RhostsRSA authorization. The default",
777 "SET SSH QUIET { ON, OFF }",
778 " Specifies whether all messages generated in conjunction with SSH",
779 " protocols should be suppressed. The default is OFF.",
781 "SET SSH STRICT-HOST-KEY-CHECK { ASK, ON, OFF }",
782 " Specifies how Kermit should behave if the the host key check fails.",
783 " When strict host key checking is OFF, the new host key is added to the",
784 " protocol-version-specific user-known-hosts-file. When strict host key",
785 " checking is ON, the new host key is refused and the connection is",
786 " dropped. When set to ASK, Kermit prompt you to say whether the new",
787 " host key should be accepted. The default is ASK.",
789 " Strict host key checking protects you against Trojan horse attacks.",
790 " It depends on you to maintain the contents of the known-hosts-file",
791 " with current and trusted host keys.",
793 "SET SSH USE-OPENSSH-CONFIG { ON, OFF }",
794 " Specifies whether Kermit should parse an OpenSSH configuration file",
795 " after applying Kermit's SET SSH commands. The configuration file",
796 " would be located at \\v(home)ssh/ssh_config. The default is OFF.",
798 "SET SSH V1 CIPHER { 3DES, BLOWFISH, DES }",
799 " Specifies which cipher should be used to protect SSH version 1",
800 " connections. The default is 3DES.",
802 "SET SSH V1 GLOBAL-KNOWN-HOSTS-FILE filename",
803 " Specifies the location of the system-wide known-hosts file. The",
806 " \v(common)ssh_known_hosts",
808 "SET SSH V1 USER-KNOWN-HOSTS-FILE filename",
809 " Specifies the location of the user-known-hosts-file. The default",
812 " \\v(appdata)ssh/known_hosts",
814 "SET SSH V2 AUTHENTICATION { EXTERNAL-KEYX, GSSAPI, HOSTBASED, ",
815 " KEYBOARD-INTERACTIVE, PASSWORD, PUBKEY, SRP-GEX-SHA1 } [ ... ]",
816 " Specifies an ordered list of SSH version 2 authentication methods to",
817 " be used when connecting to the remote host. The default list is:",
819 " external-keyx gssapi hostbased publickey srp-gex-sha1 publickey",
820 " keyboard-interactive password none",
822 "SET SSH V2 AUTO-REKEY { ON, OFF }",
823 " Specifies whether Kermit automatically issues rekeying requests",
824 " once an hour when SSH version 2 in in use. The default is ON.",
826 "SET SSH V2 CIPHERS { 3DES-CBC, AES128-CBC AES192-CBC AES256-CBC",
827 " ARCFOUR BLOWFISH-CBC CAST128-CBC RIJNDAEL128-CBC RIJNDAEL192-CBC",
828 " RIJNDAEL256-CBC }",
829 " Specifies an ordered list of SSH version ciphers to be used to encrypt",
830 " the established connection. The default list is:",
832 " aes128-cbc 3des-cbc blowfish-cbc cast128-cbc arcfour aes192-cbc",
835 " \"rijndael\" is an alias for \"aes\".",
837 "SET SSH V2 GLOBAL-KNOWN-HOSTS-FILE filename",
838 " Specifies the location of the system-wide known-hosts file. The default",
841 " \\v(common)ssh/known_hosts2",
843 "SET SSH V2 HOSTKEY-ALGORITHMS { SSH-DSS, SSH-RSA }",
844 " Specifies an ordered list of hostkey algorithms to be used to verify",
845 " the identity of the host. The default list is",
849 "SET SSH V2 MACS { HMAC-MD5 HMAC-MD5-96 HMAC-RIPEMD160 HMAC-SHA1",
851 " Specifies an ordered list of Message Authentication Code algorithms to",
852 " be used for integrity protection of the established connection. The",
855 " hmac-md5 hmac-sha1 hmac-ripemd160 hmac-sha1-96 hmac-md5-96",
857 "SET SSH V2 USER-KNOWN-HOSTS-FILE filename",
858 " Specifies the location of the user-known-hosts file. The default",
861 " \\v(appdata)ssh/known_hosts2",
863 "SET SSH VERBOSE level",
864 " Specifies how many messages should be generated by the OpenSSH engine.",
865 " The level can range from 0 to 7. The default value is 2.",
867 "SET SSH VERSION { 1, 2, AUTOMATIC }",
868 " Specifies which SSH version should be negotiated. The default is",
869 " AUTOMATIC which means use version 2 if supported; otherwise to fall",
870 " back to version 1.",
872 "SET SSH X11-FORWARDING { ON, OFF }",
873 " Specifies whether X Windows System Data is to be forwarded across the",
874 " established SSH connection. The default is OFF. When ON, the DISPLAY",
875 " value is either set using the SET TELNET ENV DISPLAY command or read",
876 " from the DISPLAY environment variable.",
878 "SET SSH XAUTH-LOCATION filename",
879 " Specifies the location of the xauth executable (if provided with the",
880 " X11 Server software.)",
881 #else /* SSHBUILTIN */
882 "Syntax: SET SSH COMMAND command",
883 " Specifies the external command to be used to make an SSH connection.",
884 " By default it is \"ssh -e none\" (ssh with no escape character).",
885 #endif /* SSHBUILTIN */
891 static char *hmxygpr[] = {
892 "Syntax: SET GET-PUT-REMOTE { AUTO, FTP, KERMIT}",
893 " Tells Kermit whether GET, PUT, and REMOTE commands should be directed",
894 " at a Kermit server or an FTP server. The default is AUTO, meaning that",
895 " if you have only one active connection, the appropriate action is taken",
896 " when you give a GET, PUT, or REMOTE command. SET GET-PUT-REMOTE FTP forces"
898 " Kermit to treat GET, PUT, and REMOTE as FTP client commands; setting this",
899 " to KERMIT forces these commands to be treated as Kermit client commands.",
900 " NOTE: PUT includes SEND, MPUT, MSEND, and all other similar commands.",
901 " Also see HELP REMOTE, HELP SET LOCUS, HELP FTP.",
907 static char *hmxylocus[] = {
909 "Syntax: SET LOCUS { ASK, AUTO, LOCAL, REMOTE }",
911 "Syntax: SET LOCUS { AUTO, LOCAL, REMOTE }",
913 " Specifies whether unprefixed file management commands should operate",
914 " locally or (when there is a connection to a remote FTP or Kermit",
915 " server) sent to the server. The affected commands are: CD (CWD), PWD,",
916 " CDUP, DIRECTORY, DELETE, RENAME, MKDIR, and RMDIR. To force any of",
917 " these commands to be executed locally, give it an L-prefix: LCD, LDIR,",
918 " etc. To force remote execution, use the R-prefix: RCD, RDIR, and so",
919 " on. SHOW COMMAND shows the current Locus.",
921 " By default, the Locus for file management commands is switched",
922 " automatically whenever you make or close a connection: if you make an",
923 " FTP connection, the Locus becomes REMOTE; if you close an FTP connection",
924 " or make any other kind of connection, the Locus becomes LOCAL.",
927 " There are two kinds of automatic switching: ASK (the default) which",
928 " asks you if it's OK to switch, and AUTO, which switches without asking.",
931 " If you give a SET LOCUS LOCAL or SET LOCUS REMOTE command, this sets",
932 " the locus as indicated and disables automatic switching.",
934 " SET LOCUS AUTO or SET LOCUS ASK restores automatic switching.",
935 " You can also change Locus switching and behavior in the Actions menu.",
937 " SET LOCUS AUTO restores automatic switching.",
943 static char *hmxxtak[] = {
944 "Syntax: TAKE filename [ arguments ]",
945 " Tells Kermit to execute commands from the named file. Optional argument",
946 " words, are automatically assigned to the macro argument variables \\%1",
947 " through \\%9. Kermit command files may themselves contain TAKE commands,",
948 " up to any reasonable depth of nesting.",
953 static char *hmxxfirew[] = {
955 "Firewall Traversal in Kermit 95",
957 "Firewall Traversal in C-Kermit",
968 "This version of Kermit was built with no support for firewall traversal",
969 "protocols. Kermit can be built with support for HTTP Proxy Servers,",
970 "SOCKS authorized firewall traversal, and FTP Passive connection modes.",
972 #else /* NOFIREWALL */
974 "The simplist form of firewall traversal is the HTTP CONNECT command. The",
975 "CONNECT command was implemented to allow a public web server which usually",
976 "resides on the boundary between the public and private networks to forward",
977 "HTTP requests from clients on the private network to public web sites. To",
978 "allow secure web connections, the HTTP CONNECT command authenticates the",
979 "client with a username/password and then establishes a tunnel to the",
984 "Web servers that support the CONNECT command can be configured to allow",
985 "outbound connections for authenticated users to any TCP/IP hostname-port",
986 "combination accessible to the Web server. HTTP CONNECT can be used only",
987 "with TCP-based protocols. Protocols such as Kerberos authentication that",
988 "use UDP/IP cannot be tunneled using HTTP CONNECT.",
992 "SET TCP HTTP-PROXY [switches] [<hostname or ip-address>[:<port>]]",
993 " If a hostname or ip-address is specified, Kermit uses the given",
994 " proxy server when attempting outgoing TCP connections. If no hostnamer",
995 " or ip-address is specified, any previously specified Proxy server is",
996 " removed. If no port number is specified, the \"http\" service is used.",
997 " [switches] can be one or more of:",
998 " /AGENT:<agent> /USER:<user> /PASSWORD:<password>",
999 " Switch parameters are used when connecting to the proxy server and",
1000 " override any other values associated with the connection.",
1006 "In the early 1990s as firewalls were becoming prevalent, David Koblas",
1007 "developed the SOCKS protocol for TCP/IP firewall traversal. Two versions",
1008 "of SOCKS are currently in use: Version 4.2 lets TCP/IP client applications",
1009 "traverse firewalls, similar to HTTP CONNECT, except that the SOCKS client",
1010 "is aware of the public source IP address and port, which can be used within",
1011 "the application protocol to assist in securing the connection (e.g. FTP",
1012 "sessions secured with GSSAPI Kerberos 5).",
1016 "In 1995 the IETF issued SOCKS Protocol Version 5 (RFC 1928), which is",
1017 "significantly more general than version 4. Besides supporting client-",
1018 "to-server TCP/IP connections, it also includes:",
1021 " . Authenticated firewall traversal of UDP/IP packets.",
1022 " . Authenticated binding of incoming public ports on the firewall.",
1025 "This lets a service on the private network offer public services. It also",
1026 "lets client applications like FTP establish a temporary public presence",
1027 "that can be used by the FTP server to create a data channel. By allowing",
1028 "the client to bind to a public port on the firewall and be aware of the",
1029 "public address, SOCKS 5 lets the application protocol communicate this",
1030 "information to the server.",
1036 "Kermit 95 supports SOCKS 4.2. The SOCKS Server is specified with:",
1038 " SET TCP SOCKS-SERVER hostname/ip-address",
1040 "The SOCKS.CONF file is found by examining the ETC environment variable;",
1041 "searching in \\WINDOWS on Windows 95/98/ME; or the",
1042 "\\WINDOWS\\SYSTEM\\DRIVERS\\ETC directory on NT\\2000\\XP systems.",
1046 "Kermit/2 provides support for SOCKS 4.2 servers when using IBM TCP/IP 2.0,",
1047 "IBM OS/2 WARP, or a compatible protocol stack. SOCKS is one popular means",
1048 "of implementing a firewall between a private network and the Internet.",
1050 "Kermit/2 shares the same SOCKS environment variables as IBM Gopher. It also",
1051 "supports the use of local SOCKS configuration files.",
1053 "To specify the default SOCKS Server, add SET SOCKS_SERVER= to your",
1056 "If you must use a SOCKS Distributed Name Server, add SET SOCKS_NS= to your",
1060 "If you must use a specific with your SOCKS server, be sure to add SET USER=",
1061 "to your CONFIG.SYS file. Otherwise, \"os2user\" is used by default.",
1065 "The SOCKS configuration file must be placed in the directory pointed to by",
1066 "the ETC environment variable as declared in your CONFIG.SYS file. The name",
1067 "should be SOCKS.CONF. On a FAT file system, use SOCKS.CNF.",
1070 "The format of the lines in the SOCKS configuration file are as follows:",
1073 " . deny [*=userlist] dst_addr dst_mask [op port]",
1074 " . direct [*=userlist] dst_addr dst_mask [op port]",
1075 " . sockd [@=serverlist] [*=userlist] dst_addr dst_mask [op port]",
1078 "op must be one of 'eq', 'neq', 'lt', 'gt', 'le', or 'ge'. dst_addr,",
1079 "dst_mask, and port may be either numeric or name equivalents.",
1083 "Kermit/2 ignores the [*=userlist] and [@=serverlist] fields. Matches are",
1084 "determined on a first match not a best match basis. Addresses for which no",
1085 "match is found default to \"sockd\".",
1089 "For completeness: Fields in square brackets are optional. The optional",
1090 "@=serverlist field with a 'sockd' line specifies the list of SOCKS servers",
1091 "the client should try (in the given order) instead of the default SOCKS",
1092 "server. If the @=serverlist part is omitted, then the default SOCKS server",
1093 "is used. Commas are used in the userlist and serverlist as separators, no",
1094 "white spaces are allowed.",
1102 "This version of C-Kermit supports SOCKS version 5.",
1103 #else /* CK_SOCKS5 */
1104 "This version of C-Kermit supports SOCKS version 4.",
1105 #endif /* CK_SOCKS5 */
1107 "See the man page (or other system documentation) for information on",
1108 "configuring the SOCKS library via the /etc/socks.conf file.",
1112 #endif /* CK_SOCKS */
1116 "FTP is one of the few well-known Internet services that requires",
1117 "multiple connections. As described above, FTP originally required the",
1118 "server to establish the data connection to the client using a destination",
1119 "address and port provided by the client. This doesn't work with port",
1120 "filtering firewalls.",
1124 "Later, FTP protocol added a \"passive\" mode, in which connections for",
1125 "the data channels are created in the reverse direction. Instead of the",
1126 "server establishing a connection to the client, the client makes a second",
1127 "connection with the server as the destination. This works just fine as",
1128 "long as the client is behind the firewall and the server is in public",
1129 "address space. If the server is behind a firewall then the traditional",
1130 "active mode must be used. If both the client and server are behind their",
1131 "own port filtering firewalls then data channels cannot be established.",
1135 "In Kermit's FTP client, passive mode is controlled with the command:",
1138 " SET FTP PASSIVE-MODE { ON, OFF }",
1141 "The default is ON, meaning to use passive mode.",
1144 #endif /* NOFIREWALL */
1148 #endif /* TCPSOCKET */
1150 static char *hmxxsave[] = {
1151 "Syntax: SAVE item filename { NEW, APPEND }",
1152 " Saves the requested material in the given file. A new file is created",
1153 " by default; include APPEND at the end of the command to append to an",
1154 " existing file. Items:",
1156 " KEYMAP Saves the current key settings.",
1157 #endif /* NOSETKEY */
1159 " COMMAND HISTORY Saves the current command recall (history) buffer",
1160 #endif /* CK_RECALL */
1162 " COMMAND SCROLLBACK Saves the current command-screen scrollback buffer",
1163 " TERMINAL SCROLLBACK Saves the current terminal-screen scrollback buffer",
1169 static char *hmxxchroot[] = {
1170 "Syntax: SET ROOT directoryname",
1171 " Sets the root for file access to the given directory and disables access",
1172 " to system and shell commands and external programs. Once this command",
1173 " is given, no files or directories outside the tree rooted by the given",
1174 " directory can be opened, read, listed, deleted, renamed, or accessed in",
1175 " any other way. This command can not be undone by a subsequent SET ROOT",
1176 " command. Primarily for use with server mode, to restrict access of",
1177 " clients to a particular directory tree. Synonym: CHROOT.",
1182 static char *hmxxscrn[] = {
1183 "Syntax: SCREEN { CLEAR, CLEOL, MOVE row column }",
1185 " Performs screen-formatting actions.",
1187 " Performs screen-formatting actions. Correct operation of these commands",
1188 " depends on proper terminal setup on both ends of the connection -- mainly",
1189 " that the host terminal type is set to agree with the kind of terminal or",
1190 " the emulation you are viewing C-Kermit through.",
1194 " Moves the cursor to home position and clears the entire screen.",
1196 " Synonyms: CLS, CLEAR SCREEN, CLEAR COMMAND-SCREEN ALL",
1198 " Synonyms: CLS, CLEAR SCREEN.",
1202 " Clears from the current cursor position to the end of the line.",
1204 " Synonym: CLEAR COMMAND-SCREEN EOL",
1207 "SCREEN MOVE row column",
1208 " Moves the cursor to the indicated row and column. The row and column",
1209 " numbers are 1-based so on a 24x80 screen, the home position is 1 1 and",
1210 " the lower right corner is 24 80. If a row or column number is given that",
1211 " too large for what Kermit or the operating system thinks is your screen",
1212 " size, the appropriate number is substituted.",
1216 " HELP FUNCTION SCRNCURX, HELP FUNCTION SCRNCURY, HELP FUNCTION SCRSTR,",
1218 " SHOW VARIABLE TERMINAL, SHOW VARIABLE COLS, SHOW VAR ROWS, SHOW COMMAND.",
1223 static char *hmfword[] = {
1224 "\\fword(s1,n1,s2,s3,n2,n3) - Extract word from string.",
1225 " s1 = source string",
1226 " n1 = word number (1-based)",
1227 " s2 = optional break set.",
1228 " s3 = optional include set.",
1229 " n2 = optional grouping mask.",
1230 " n3 = optional separator flag:",
1231 " 0 = collapse adjacent separators",
1232 " 1 = don't collapse adjacent separators.",
1234 " Default break set is all characters except ASCII letters and digits.",
1235 " ASCII (C0) control characters are always treated as break characters.",
1236 " Default include set is null.",
1238 " If grouping mask given and nonzero, words can be grouped by quotes or",
1239 " brackets selected by the sum of the following:",
1241 " 1 = doublequotes: \"a b c\"",
1242 " 2 = braces: {a b c}",
1243 " 4 = apostrophes: 'a b c'",
1244 " 8 = parentheses: (a b c)",
1245 " 16 = square brackets: [a b c]",
1246 " 32 = angle brackets: <a b c>",
1248 " Nesting is possible with {}()[]<> but not with quotes or apostrophes.",
1251 " Word number n, if there is one, otherwise an empty string.",
1255 static char *hmxxprompt[] = {
1256 "Syntax: PROMPT [ text ]",
1257 " Enters interactive command level from within a script in such a way that",
1258 " the script can be continued with an END or RETURN command. STOP, EXIT,",
1259 " SHOW STACK, TRACE, and Ctrl-C all have their normal effects. The PROMPT",
1260 " command allows variables to be examined or changed, or any other commands",
1261 " to be given, in any number, prior to returning to the script, allowing",
1262 " Kermit to serve as its own debugger; adding the PROMPT command to a script",
1263 " is like setting a breakpoint. If the optional text is included, it is",
1264 " used as the new prompt for this level, e.g. \"prompt Breakpoint_1>\".",
1268 static char *hxxinp[] = {
1269 "Syntax: INPUT [ /NOMATCH ] { number-of-seconds, time-of-day } [ text ]",
1270 "Example: INPUT 5 Login: or INPUT 23:59:59 RING",
1271 " Waits up to the given number of seconds, or until the given time of day,",
1272 " for the given text to arrive on the connection. If no text is given,",
1273 " INPUT waits for any character. If the /NOMATCH switch is included, INPUT",
1274 " does not attempt to match any characters, but continues reading from the",
1275 " communication connection until the timeout interval expires. If the",
1276 " timeout interval is 0, the INPUT command does not wait; i.e. the given",
1277 " text must already be available for reading for the INPUT command to",
1278 " succeed. If the interval is negative, the INPUT command waits forever.",
1279 " For use in script programs with IF FAILURE and IF SUCCESS. Also see",
1280 " MINPUT, REINPUT, SET INPUT. See HELP PAUSE for details on time-of-day",
1281 " format. The text, if given, can be a \\pattern() invocation, in which",
1282 " case it is treated as a pattern rather than a literal string (HELP",
1283 " PATTERNS for details).",
1286 static char *hxxout[] = {
1287 "Syntax: OUTPUT text",
1288 " Sends the text out the communications connection, as if you had typed it",
1289 " during CONNECT mode. The text may contain backslash codes, variables,",
1290 " etc, plus the following special codes:",
1292 " \\N - Send a NUL (ASCII 0) character (you can't use \\0 for this).",
1293 " \\B - Send a BREAK signal.",
1294 " \\L - Send a Long BREAK signal.",
1296 "Also see SET OUTPUT.",
1300 static char *hxypari[] = {
1302 " Chooses 8 data bits and no parity.",
1304 "SET PARITY { EVEN, ODD, MARK, SPACE }",
1305 " Chooses 7 data bits plus the indicated kind of parity.",
1306 " Forces 8th-bit prefixing during file transfer.",
1309 "SET PARITY HARDWARE { EVEN, ODD }",
1310 " Chooses 8 data bits plus the indicated kind of parity.",
1312 "Also see SET TERMINAL BYTESIZE, SET SERIAL, and SET STOP-BITS.",
1314 "Also see SET TERMINAL BYTESIZE and SET SERIAL.",
1315 #endif /* HWPARITY */
1319 static char *hxyesc[] = {
1321 "Syntax: SET ESCAPE number",
1322 " Decimal ASCII value for escape character during CONNECT, normally 29",
1323 " (Control-]). Type the escape character followed by C to get back to the",
1324 " C-Kermit prompt or followed by ? to see other options, or use the \\Kexit",
1325 " keyboard verb, normally assigned to Alt-x.",
1328 "Syntax: SET ESCAPE number",
1329 " Decimal ASCII value for escape character during CONNECT, normally 29",
1330 " (Control-]). Type the escape character followed by C to get back to the",
1331 " C-Kermit prompt or followed by ? to see other options.",
1333 "Syntax: SET ESCAPE number",
1334 " Decimal ASCII value for escape character during CONNECT, normally 28",
1335 " (Control-\\). Type the escape character followed by C to get back to the",
1336 " C-Kermit prompt or followed by ? to see other options.",
1340 "You may also enter the escape character as ^X (circumflex followed by a",
1341 "letter or one of: @, ^, _, [, \\, or ], to indicate a control character;",
1342 "for example, SET ESC ^_ sets your escape character to Ctrl-Underscore.",
1344 "You can also specify an 8-bit character (128-255) as your escape character,",
1345 "either by typing it literally or by entering its numeric code.",
1347 #endif /* NOLOCAL */
1350 static char *hxyout[] = {
1351 "SET OUTPUT PACING <number>",
1352 " How many milliseconds to pause after sending each OUTPUT character,",
1355 "SET OUTPUT SPECIAL-ESCAPES { ON, OFF }",
1356 " Whether to process the special OUTPUT-only escapes \\B, \\L, and \\N.",
1357 " Normally ON (they are processed).",
1360 static char *hxyinp[] = {
1361 "Syntax: SET INPUT parameter value",
1364 "SET INPUT AUTODOWNLOAD { ON, OFF }",
1365 " Controls whether autodownloads are allowed during INPUT command execution.",
1367 #endif /* CK_AUTODL */
1368 "SET INPUT BUFFER-LENGTH number-of-bytes",
1369 " Removes the old INPUT buffer and creates a new one with the given length.",
1371 "SET INPUT CANCELLATION { ON, OFF }",
1372 " Whether an INPUT in progress can be can interrupted from the keyboard.",
1374 "SET INPUT CASE { IGNORE, OBSERVE }",
1375 " Tells whether alphabetic case is to be significant in string comparisons.",
1376 " This setting is local to the current macro or command file, and is",
1377 " inherited by subordinate macros and take files.",
1379 "SET INPUT ECHO { ON, OFF }",
1380 " Tells whether to display arriving characters read by INPUT on the screen.",
1383 "SET INPUT SCALE-FACTOR <number>",
1384 " A number to multiply all INPUT timeouts by, which may include a fractional",
1385 " part, e.g. 2.5. All INPUT commands that specify a timeout in seconds",
1386 " (as opposed to a specific time of day) have their time limit adjusted",
1387 " automatically by this factor, which is also available in the built-in",
1388 " read-only variable \\v(inscale). The default value is 1.0.",
1391 #endif /* CKFLOAT */
1393 "SET INPUT SILENCE <number>",
1394 " The maximum number to seconds of silence (no input at all) before the",
1395 " INPUT command times out, 0 for no maximum.",
1398 "SET INPUT TERMINAL { ON, OFF }",
1399 " Determines whether the data received during an INPUT command is displayed",
1400 " in the terminal window. Default is ON.",
1403 "SET INPUT TIMEOUT-ACTION { PROCEED, QUIT }",
1404 " Tells whether to proceed or quit from a script program if an INPUT command",
1405 " fails. PROCEED (default) allows use of IF SUCCESS / IF FAILURE commands.",
1406 " This setting is local to the current macro or command file, and is",
1407 " inherited by subordinate macros and take files.",
1410 static char *hxyfunc[] = {
1411 "SET FUNCTION DIAGNOSTICS { ON, OFF }",
1412 " Whether to issue diagnostic messages for illegal function calls and",
1413 " references to nonexistent built-in variables. ON by default.",
1415 "SET FUNCTION ERROR { ON, OFF }",
1416 " Whether an illegal function call or reference to a nonexistent built-in",
1417 " variable should cause a command to fail. OFF by default.",
1421 static char *hxyxyz[] = {
1425 /* This is for built-in protocols */
1427 "Syntax: SET PROTOCOL { KERMIT, XMODEM, YMODEM, ZMODEM } [ s1 s2 [ s3 ] ]",
1428 " Selects protocol to use for transferring files. String s1 is a command to",
1429 " send to the remote host prior to SENDing files with this protocol in",
1430 " binary mode; string s2 is the same thing but for text mode. Use \"%\" in",
1431 " any of these strings to represent the filename(s). If the protocol is",
1432 " KERMIT, you may also specify a string s3, the command to start a Kermit",
1433 " server on the remote host when you give a GET, REGET, REMOTE, or other",
1434 " client command. Use { braces } if any command contains spaces. Examples:",
1436 " set proto xmodem {rx %s} {rx -a %s}",
1437 " set proto kermit {kermit -YQir} {kermit -YQTr} {kermit -YQx}",
1439 #else /* This is for when non-Kermit protocols are external */
1442 SET PROTOCOL { KERMIT, XMODEM, YMODEM, ZMODEM } [ s1 s2 s3 s4 s5 s6 ]",
1443 " Selects protocol to use for transferring files. s1 and s2 are commands to",
1444 " output prior to SENDing with this protocol, to automatically start the",
1445 " RECEIVE process on the other end in binary or text mode, respectively.",
1446 " If the protocol is KERMIT, s3 is the command to start a Kermit server on",
1447 " the remote computer, and there are no s4-s6 commands. Otherwise, s3 and",
1448 " s4 are commands used on this computer for sending files with this protocol",
1449 " in binary or text mode, respectively; s5 and s6 are the commands for",
1450 " receiving files with this protocol. Use \"%s\" in any of these strings",
1451 " to represent the filename(s). Use { braces } if any command contains",
1452 " spaces. Examples:",
1454 " set proto kermit {kermit -YQir} {kermit -YQTr} {kermit -YQx}",
1455 " set proto ymodem rb {rb -a} {sb %s} {sb -a %s} rb rb",
1457 "External protocols require REDIRECT and external file transfer programs that",
1458 "use redirectable standard input/output.",
1459 #endif /* XYZ_INTERNAL */
1462 SET PROTOCOL KERMIT [ s1 [ s2 [ s3 ] ] ]",
1463 " Lets you specify the autoupload binary, autoupload text, and autoserver",
1464 " command strings to be sent to the remote system in advance of any SEND",
1465 " or GET commands. By default these are \"kermit -ir\", \"kermit -r\", and",
1466 " \"kermit -x\". Use { braces } around any command that contains spaces.",
1469 " set proto kermit {kermit -Yir} {kermit -YTr} {kermit -Yx}",
1472 " SHOW PROTOCOL displays the current settings.",
1475 static char *hmxxbye = "Syntax: BYE\n\
1476 Shut down and log out a remote Kermit server";
1480 static char *hmxxchmod[] = {
1481 "Syntax: CHMOD [ switches ] code filespec",
1482 " UNIX only. Changes permissions of the given file(s) to the given code,",
1483 " which must be an octal number such as 664 or 775. Optional switches:",
1485 " /FILES Only change permissions of regular files.",
1486 " /DIRECTORIES Only change permissions of directory files.",
1487 " /TYPE:BINARY Only change permissions of binary files.",
1488 " /TYPE:TEXT Only change permissions of text files.",
1489 " /DOTFILES Include files whose names begin with dot (.).",
1490 " /RECURSIVE Change permissions in subdirectories too.",
1491 " /LIST List each file (synonym: /VERBOSE).",
1492 " /NOLIST Operate silently (synonym: /QUIET).",
1493 " /PAGE When listing, pause at end of each screen (implies /LIST).",
1494 " /NOPAGE When listing, don't pause at end of each screen.",
1495 " /SIMULATE Show what would be done but don't actually do it.",
1499 #endif /* CK_PERMS */
1503 static char *hmxxsexp[] = {
1504 "Syntax: (operation operand [ operand [ ... ] ])",
1506 " C-Kermit includes a simple LISP-like S-Expression parser operating on",
1507 " numbers only. An S-Expression is always enclosed in parentheses. The",
1508 " parentheses can contain (a) a number, (b) a variable, (c) a function that",
1509 " returns a number, or (d) an operator followed by one or more operands.",
1510 " Operands can be any of (a) through (c) or an S-Expression. Numbers can be",
1511 " integers or floating-point. Any operand that is not a number and does not",
1512 " start with backslash (\\) is treated as a Kermit macro name. Operators:",
1514 " Operator Action Example Value",
1515 " EVAL (.) Returns the contained value (6) 6",
1516 " QUOTE (') Inhibits evaluation of following value (quote a) a",
1517 " SETQ Assigns a value to a global variable (setq a 2) 2",
1518 " LET Assigns a value to a local variable (let b -1.3) -1.3",
1519 " + Adds all operands (1 or more) (+ a b) 0.7",
1520 " - Subtracts all operands (1 or more) (- 9 5 2 1) 1",
1521 " * Multiplies all operands (1 or more) (* a (+ b 1) 3) -1.8",
1522 " / Divides all operands (1 or more) (/ b a 2) -0.325",
1523 " ^ Raise given number to given power (^ 3 2) 9",
1524 " ++ Increments a variable (++ a 1.2) 3.2",
1525 " -- Decrements a variable (-- a) 1",
1526 " ABS Absolute value of 1 operand (abs (* a b 3)) 7.8",
1527 " MAX Maximum of all operands (1 or more) (max 1 2 3 4) 4",
1528 " MIN Minimum of all operands (1 or more) (min 1 2 3 4) 1",
1529 " MOD Modulus of all operands (1 or more) (mod 7 4 2) 1",
1530 " TRUNCATE Integer part of floating-point operand (truncate 1.333) 1",
1531 " CEILING Ceiling of floating-point operand (ceiling 1.25) 2",
1532 " FLOOR Floor of floating-point operand (floor 1.25) 1",
1533 " ROUND Operand rounded to nearest integer (round 1.75) 2",
1534 " SQRT Square root of 1 operand (sqrt 2) 1.414..",
1535 " EXP e (2.71828..) to the given power (exp -1) 0.367..",
1536 " SIN Sine of angle expressed in radians (sin (/ pi 2)) 1.0",
1537 " COS Cosine of given number (cos pi) -1.0",
1538 " TAN Tangent of given number (tan pi) 0.0",
1539 " LOG Natural log (base e) of given number (log 2.7183) 1.000..",
1540 " LOG10 Log base 10 of given number (log10 1000) 3.0",
1542 "Predicate operators return 0 if false, 1 if true, and if it is the outermost",
1543 "operator, sets SUCCESS or FAILURE accordingly:",
1545 " < Operands in strictly descending order (< 6 5 4 3 2 1) 1",
1546 " <= Operands in descending order (<= 6 6 5 4 3 2) 1",
1547 " != Operands are not equal (!= 1 1 1.0) 0",
1548 " = (==) All operands are equal (= 3 3 3 3) 1",
1549 " > Operands in strictly ascending order (> 1 2 3 4 5 6) 1",
1550 " >= Operands in ascending order (> 1 1 2 3 4 5) 1",
1551 " AND (&&) Operands are all true (and 1 1 1 1 0) 0",
1552 " OR (||) At least one operand is true (or 1 1 1 1 0) 1",
1553 " XOR Logical Exclusive OR (xor 3 1) 0",
1554 " NOT (!) Reverses truth value of operand (not 3) 0",
1556 "Bit-oriented operators:",
1558 " & Bitwise AND (& 7 2) 2",
1559 " | Bitwise OR (| 1 2 3 4) 7",
1560 " # Bitwise Exclusive OR (# 3 1) 2",
1561 " ~ Reverses all bits (~ 3) -4",
1563 "Operators that work on truth values:",
1565 " IF Conditional evaluation (if (1) 2 3) 2",
1567 "Operators can also be names of Kermit macros that return either numeric",
1568 "values or no value at all.",
1570 "Built-in constants are:",
1573 " nil False (empty)",
1574 " pi The value of Pi (3.1415926...)",
1576 "If SET SEXPRESSION ECHO-RESULT is AUTO (the default), the value of the",
1577 "S-Expression is printed if the S-Expression is given at top level; if ON,",
1578 "it is printed at any level; if OFF it is not printed. At all levels, the",
1579 "variable \\v(sexpression) is set to the most recent S-Expression, and",
1580 "\\v(svalue) is set to its value. You can use the \\fsexpresssion() function",
1581 "to evaluate an S-Expression anywhere in a Kermit command.",
1587 static char *hmxxgrep[] = {
1589 "Syntax: GREP [ options ] pattern filespec",
1591 "Syntax: FIND [ options ] pattern filespec",
1592 #endif /* UNIXOROSK */
1593 " Searches through the given file or files for the given character string",
1594 " or pattern. In the normal case, all lines containing any text that matches"
1596 " the pattern are printed. Pattern syntax is as described in HELP PATTERNS",
1597 " except that '*' is implied at the beginning unless the pattern starts with",
1598 " '^' and also at the end unless the pattern ends with '$'. Therefore,",
1599 " \"grep something *.txt\" lists all lines in all *.txt files that contain",
1600 " the word \"something\", but \"grep ^something *.txt\" lists only the lines",
1601 " that START with \"something\". The command succeeds if any of the given",
1602 " files contained any lines that match the pattern, otherwise it fails.",
1607 #endif /* UNIXOROSK */
1609 "File selection options:",
1611 " Excludes backup files (like oofa.txt.~3~) from the search.",
1613 " Includes files whose names start with dot (.) in the search.",
1615 " Excludes files whose names start with dot (.) from the search.",
1618 " Searches through files in subdirectories too.",
1619 #endif /* RECURSIVE */
1621 " Search only text files (requires FILE SCAN ON).",
1623 " Search only binary files (requires FILE SCAN ON).",
1625 "Pattern-matching options:",
1627 " Ignores case of letters (ASCII only) when comparing.",
1629 " Searches for lines that do NOT match the pattern.",
1632 " /COUNT:variable-name",
1633 " For each file, prints only the filename and a count of matching lines",
1634 " and assigns the total match count to the variable, if one is given.",
1636 " Prints the name of each file that contains at least one matching line,",
1637 " one name per line, rather than showing each matching line.",
1639 " Doesn't print anything (but sets SUCCESS or FAILURE appropriately).",
1641 " Precedes each file line by its line number within the file.",
1643 " Pauses after each screenful.",
1645 " Doesn't pause after each screenful.",
1647 " Sends results to the given file. If this switch is omitted, the",
1648 " results appear on your screen. This switch overrides any express or",
1649 " implied /PAGE switch.",
1652 static char *hmxxdir[] = {
1654 "Syntax: DIRECTORY [ switches ] [ filespec [ filespec [ ... ] ] ]",
1656 " If LOCUS is REMOTE or LOCUS is AUTO and you have an FTP connection,",
1657 " this command is equivalent to REMOTE DIRECTORY (RDIR). Otherwise:",
1660 " Lists local files. The filespec may be a filename, possibly containing",
1661 " wildcard characters, or a directory name. If no filespec is given, all",
1662 " files in the current directory are listed. If a directory name is given,",
1663 " all the files in it are listed. Multiple filespecs can be given.",
1664 " Optional switches:",
1666 " /BRIEF List filenames only.",
1668 " /VERBOSE + Also list permissions, size, and date.",
1670 " /VERBOSE + Also list date and size.",
1671 #endif /* CK_PERMS */
1672 " /FILES Show files but not directories.",
1673 " /DIRECTORIES Show directories but not files.",
1674 " /ALL + Show both files and directories.",
1675 " /ARRAY:&a Store file list in specified array (e.g. \\%a[]).",
1676 " /PAGE Pause after each screenful.",
1677 " /NOPAGE Don't pause after each screenful.",
1679 " /DOTFILES Include files whose names start with dot (period).",
1680 " /NODOTFILES + Don't include files whose names start with dot.",
1681 " /FOLLOWLINKS Follow symbolic links.",
1682 " /NOFOLLOWLINKS + Don't follow symbolic links.",
1683 " /BACKUP + Include backup files (names end with .~n~).",
1684 " /NOBACKUPFILES Don't include backup files.",
1685 #endif /* UNIXOROSK */
1686 " /OUTPUT:file Store directory listing in the given file.",
1687 " /HEADING Include heading and summary.",
1688 " /NOHEADING + Don't include heading or summary.",
1689 " /SUMMARY Print only count and total size of matching files.",
1690 " /XFERMODE Show pattern-based transfer mode (T=Text, B=Binary).",
1691 " /TYPE: Show only files of the specified type (text or binary).",
1692 " /MESSAGE:text Add brief message to each listing line.",
1693 " /NOMESSAGE + Don't add message to each listing line.",
1694 " /NOXFERMODE + Don't show pattern-based transfer mode",
1695 " /ISODATE + In verbose listings, show date in ISO 8061 format.",
1696 " /ENGLISHDATE In verbose listings, show date in \"English\" format.",
1698 " /RECURSIVE Descend through subdirectories.",
1699 " /NORECURSIVE + Don't descend through subdirectories.",
1700 #endif /* RECURSIVE */
1701 " /SORT:key Sort by key, NAME, DATE, or SIZE; default key is NAME.",
1702 " /NOSORT + Don't sort.",
1703 " /ASCENDING + If sorting, sort in ascending order.",
1704 " /REVERSE If sorting, sort in reverse order.",
1706 "Factory defaults are marked with +. Default for paging depends on SET",
1707 "COMMAND MORE-PROMPTING. Use SET OPTIONS DIRECTORY [ switches ] to change",
1708 "defaults; use SHOW OPTIONS to display customized defaults.",
1710 "Syntax: DIRECTORY [ filespec ]",
1711 " Lists the specified file or files. If no filespec is given, all files",
1712 " in the current directory are listed.",
1713 #endif /* DOMYDIR */
1718 static char *hmxxkcd[] = {
1719 "Syntax: KCD symbolic-directory-name",
1720 " Kermit Change Directory: Like CD (q.v.) but (a) always acts locally, and",
1721 " (b) takes a symbolic directory name rather than an actual directory name.",
1722 " The symbolic names correspond to Kermit's directory-valued built-in",
1723 " variables, such as \\v(download), \\v(exedir), and so on. Here's the list:"
1727 " appdata Your personal Kermit 95 application data directory",
1728 " common Kermit 95's application data directory for all users",
1729 " desktop Your Windows desktop",
1731 " download Your download directory (if any)",
1733 " exedir The directory where the Kermit executable resides",
1734 #endif /* OS2ORUNIX */
1735 " home Your home, login, or default directory",
1736 " inidir The directory where Kermit's initialization was found",
1738 " lockdir The UNIX UUCP lockfile directory on this computer",
1741 " personal Your \"My Documents\" directory",
1743 " startup Your current directory at the time Kermit started",
1744 " textdir The directory where Kermit text files reside, if any",
1745 " tmpdir Your temporary directory",
1747 " Also see CD, SET FILE DOWNLOAD, SET TEMP-DIRECTORY.",
1752 static char *hmxxcwd[] = {
1754 " If LOCUS is REMOTE or LOCUS is AUTO and you have an FTP connection,",
1755 " this command is equivalent to REMOTE CD (RCD). Otherwise:",
1759 "Syntax: CD [ directory or device:directory ]",
1760 " Change Working Directory. Equivalent to VMS SET DEFAULT command.",
1763 "Change Working Directory, equivalent to AOS/VS 'dir' command.",
1766 "Syntax: CD [ disk or directory name ]",
1767 " Change Disk or Directory. If a disk or directory name is not specified,",
1768 " your current directory becomes the one specified by HOME environment",
1769 " variable, if any. A disk letter must be followed by a colon.",
1771 "Syntax: CD [ directory name ]",
1772 " Change Directory. Changes your current, working, default directory to the",
1773 " one given, so that future non-absolute filename references are relative to",
1774 " this directory. If the directory name is omitted, your home (login)",
1775 " directory is supplied.",
1777 #endif /* datageneral */
1779 " C-Kermit's default prompt shows your current directory.",
1780 " Synonyms: LCD, CWD.",
1782 " Also see: SET LOCUS, PWD, CDUP, BACK, REMOTE CD (RCD), SET CD, SET PROMPT.",
1784 " Also see: PWD, CDUP, BACK, REMOTE CD (RCD), SET CD, SET PROMPT.",
1787 " And see: HELP KCD.",
1789 " Relevant environment variables: CDPATH, HOME.",
1792 static char *hmxxdel[] = {
1793 "Syntax: DELETE [ switches... ] filespec",
1795 " If LOCUS is REMOTE or LOCUS is AUTO and you have an FTP connection,",
1796 " this command is equivalent to REMOTE DELETE (RDELETE). Otherwise:",
1799 " Deletes a file or files on the computer where C-Kermit is running.",
1800 " The filespec may denote a single file or can include wildcard characters",
1801 " to match multiple files. RM is a synonym for DELETE. Switches include:",
1805 " Specifies that only those files created after the given date-time are",
1807 " Specifies that only those files modified after the given date-time are",
1809 " to be deleted. HELP DATE for info about date-time formats.",
1811 "/BEFORE:date-time",
1813 " Specifies that only those files modified before the given date-time",
1815 " Specifies that only those files modified before the given date-time",
1817 " are to be deleted.",
1819 "/NOT-AFTER:date-time",
1821 " Specifies that only those files modified at or before the given date-time",
1823 " Specifies that only those files modified at or before the given date-time",
1825 " are to be deleted.",
1827 "/NOT-BEFORE:date-time",
1829 " Specifies that only those files modified at or after the given date-time",
1831 " Specifies that only those files modified at or after the given date-time",
1833 " are to be deleted.",
1835 "/LARGER-THAN:number",
1836 " Specifies that only those files longer than the given number of bytes are",
1839 "/SMALLER-THAN:number",
1840 " Specifies that only those files smaller than the given number of bytes are",
1844 " Specifies that any files whose names match the pattern, which can be a",
1845 " regular filename or may contain wildcards, are not to be deleted. To",
1846 " specify multiple patterns (up to 8), use outer braces around the group",
1847 " and inner braces around each pattern:",
1849 " /EXCEPT:{{pattern1}{pattern2}...}",
1853 " Include (delete) files whose names begin with \".\".",
1856 " Skip (don't delete) files whose names begin with \".\".",
1858 #endif /* UNIXOROSK */
1860 " Delete only regular text files (requires FILE SCAN ON)",
1863 " Delete only regular binary files (requires FILE SCAN ON)",
1866 " Include directories. If this switch is not given, only regular files",
1867 " are deleted. If it is given, Kermit attempts to delete any directories",
1868 " that match the given file specification, which succeeds only if the",
1869 " directory is empty.",
1873 " The DELETE command applies to the entire directory tree rooted in the",
1874 " current or specified directory. When the /DIRECTORIES switch is also",
1875 " given, Kermit deletes all the (matching) files in each directory before",
1876 " attempting to delete the directory itself.",
1878 #endif /* RECURSIVE */
1882 " This is a shortcut for /RECURSIVE /DIRECTORIES /DOTFILES.",
1885 " This is a shortcut for /DIRECTORIES /DOTFILES.",
1886 #endif /* RECURSIVE */
1890 " This is a shortcut for /RECURSIVE /DIRECTORIES.",
1893 " This is a synonym for /DIRECTORIES.",
1894 #endif /* RECURSIVE */
1898 " List each file and tell whether it was deleted. Synonyms: /LOG, /VERBOSE.",
1901 " Don't list files while deleting. Synonyms: /NOLOG, /QUIET.",
1904 " Print heading and summary information.",
1907 " Don't print heading and summary information.",
1910 " Like /HEADING /NOLIST, but only prints the summary line.",
1913 " If listing, pause after each screenful.",
1916 " Don't pause after each screenful.",
1919 " Interactively ask permission to delete each file. Reply Yes or OK to",
1920 " delete it, No not to delete it, Quit to cancel the DELETE command, and",
1921 " Go to go ahead and delete all the rest of the files without asking.",
1924 " Delete files without asking permission.",
1927 " Preview files selected for deletion without actually deleting them.",
1930 "Use SET OPTIONS DELETE to make selected switches effective for every DELETE",
1932 unless you override them; use SHOW OPTIONS to see selections currently",
1934 "in effect. Also see HELP SET LOCUS, HELP PURGE, HELP WILDCARD.",
1936 "in effect. Also see HELP PURGE, HELP WILDCARD.",
1941 static char *hmxxhttp[] = {
1944 "HTTP [ <switches> ] OPEN [{ /SSL, /TLS }] <hostname> <service/port>",
1946 "HTTP [ <switches> ] OPEN <hostname> <service/port>",
1948 " Instructs Kermit to open a new connection for HTTP communication with",
1949 " the specified host on the specified port. The default port is \"http\".",
1951 " If /SSL or /TLS are specified or if the service is \"https\" or port 443,",
1952 " a secure connection will be established using the current authentication",
1953 " settings. See HELP SET AUTH for details.",
1955 " If <switches> are specified, they are applied to all subsequent HTTP",
1956 " actions (GET, PUT, ...) until an HTTP CLOSE command is executed.",
1957 " A URL can be included in place of the hostname and service or port.",
1960 " Instructs Kermit to close any open HTTP connection and clear any saved",
1963 "HTTP [ <switches> ] CONNECT <host>[:<port>]",
1964 " Instructs the server to establish a connection with the specified host",
1965 " and to redirect all data transmitted between Kermit and the host for the",
1966 " life of the connection.",
1968 "HTTP [ <switches> ] GET <remote-filename> [ <local-filename> ]",
1969 " Retrieves the named file on the currently open HTTP connection. The",
1970 " default local filename is the same as the remote filename, but with any",
1971 " path stripped. If you want the file to be displayed on the screen instead",
1972 " of stored on disk, include the /TOSCREEN switch and omit the local",
1973 " filename. If you give a URL instead of a remote filename, this commands",
1974 " opens the connection, GETs the file, and closes the connection; the same",
1975 " is true for the remaining HTTP commands for which you can specify a",
1976 " remote filename, directory name, or path.",
1978 "HTTP [ <switches> ] HEAD <remote-filename> [ <local-filename> ]",
1979 " Like GET except without actually getting the file; instead it gets only",
1980 " the headers, storing them into the given file (if a local filename is",
1981 " specified), one line per header item as shown in the /ARRAY: switch",
1984 "HTTP [ <switches> ] INDEX <remote-directory> [ <local-filename> ]",
1985 " Retrieves the file listing for the given server directory.",
1986 " NOTE: This command is not supported by most Web servers, and even when",
1987 " the server understand it, there is no stardard response format.",
1989 "HTTP [ <switches> ] POST [ /MIME-TYPE:<type> ] <local-file> <remote-path>",
1991 " Used to send a response as if it were sent from a form. The data to be",
1992 " posted must be read from a file.",
1994 "HTTP [ <switches> ] PUT [ /MIME-TYPE:<type> ] <local-file> <remote-file>",
1996 " Uploads the given local file to server file. If the remote filename is",
1997 " omitted, the local name is used, but with any path stripped.",
1999 "HTTP [ <switches> ] DELETE <remote-filename>",
2000 " Instructs the server to delete the specified filename.",
2002 "where <switches> are:",
2003 "/AGENT:<user-agent>",
2004 " Identifies the client to the server; \"C-Kermit\" or \"Kermit-95\"",
2007 "/HEADER:<header-line>",
2008 " Used for specifying any optional headers. A list of headers is provided",
2009 " using braces for grouping:",
2011 " /HEADER:{{<tag>:<value>}{<tag>:<value>}...}",
2013 " For a listing of valid <tag> value and <value> formats see RFC 1945:",
2014 " \"Hypertext Transfer Protocol -- HTTP/1.0\". A maximum of eight headers",
2015 " may be specified.",
2018 " Display server responses on the screen.",
2021 " In case a page requires a username for access.",
2023 "/PASSWORD:<password>",
2024 " In case a page requires a password for access.",
2026 "/ARRAY:<arrayname>",
2027 " Tells Kermit to store the response headers in the given array, one line",
2028 " per element. The array need not be declared in advance. Example:",
2030 " http /array:c get kermit/index.html",
2033 " 1. Date: Fri, 26 Nov 1999 23:12:22 GMT",
2034 " 2. Server: Apache/1.3.4 (Unix)",
2035 " 3. Last-Modified: Mon, 06 Sep 1999 22:35:58 GMT",
2036 " 4. ETag: \"bc049-f72-37d441ce\"",
2037 " 5. Accept-Ranges: bytes",
2038 " 6. Content-Length: 3954",
2039 " 7. Connection: close ",
2040 " 8. Content-Type: text/html",
2042 "As you can see, the header lines are like MIME e-mail header lines:",
2043 "identifier, colon, value. The /ARRAY switch is the only method available",
2044 "to a script to process the server responses for a POST or PUT command.",
2051 static char *hmxxauth[] = {
2053 "AUTHENTICATE { KERBEROS4, KERBEROS5 [ switches ] } <action> [ switches ]",
2054 " Obtains or destroys Kerberos tickets and lists information about them.",
2055 " Actions are INITIALIZE, DESTROY, and LIST-CREDENTIALS. KERBEROS4 can be",
2056 " abbreviated K4 or KRB4; KERBEROS5 can be abbreviated K5 or KRB5. Use ? to",
2057 " see which keywords, switches, or other quantities are valid at each point",
2060 " The actions are INITIALIZE, DESTROY, and LIST-CREDENTIALS:",
2062 " AUTH { K4, K5 } { INITIALIZE [switches], DESTROY,",
2063 " LIST-CREDENTIALS [switches] }",
2065 " The INITIALIZE action is the most complex, and its format is different",
2066 " for Kerberos 4 and Kerberos 5. The format for Kerberos 4 is:",
2068 " AUTH K4 INITIALIZE [ /INSTANCE:<name> /LIFETIME:<minutes> -",
2069 " /PASSWORD:<password> /PREAUTH /REALM:<name> <principal> ]",
2071 " All switches are optional. Kerberos 4 INITIALIZE switches are:",
2073 " /INSTANCE:<name>",
2074 " Allows an Instance (such as a hostname) to be specified.",
2076 " /LIFETIME:<number>",
2077 " Specifies the requested lifetime in minutes for the ticket. If no",
2078 " lifetime is specified, 600 minutes is used. If the lifetime is greater",
2079 " than the maximum supported by the ticket granting service, the resulting",
2080 " lifetime is shortened accordingly.",
2083 " Instructs Kermit to send a ticket getting ticket (TGT) request to the",
2084 " KDC without any preauthentication data.",
2086 " /PASSWORD:<string>",
2087 " Allows a password to be included on the command line or in a script",
2088 " file. If no /PASSWORD switch is included, you are prompted on a separate"
2090 " line. The password switch is provided on a use-at-your-own-risk basis",
2091 " for use in automated scripts. WARNING: Passwords should not be stored in"
2096 " Instructs Kermit to send a preauthenticated Ticket-Getting Ticket (TGT)",
2097 " request to the KDC instead of a plaintext request. The default when",
2098 " supported by the Kerberos libraries.",
2101 " Allows a realm to be specified (overriding the default realm).",
2104 " Your identity in the given or default Kerberos realm, of the form:",
2105 " userid[.instance[.instance]]@[realm] ",
2106 " Can be omitted if it is the same as your username or SET LOGIN USERID",
2107 " value on the client system.",
2109 " The format for Kerberos 5 is as follows:",
2111 " AUTH K5 [ /CACHE:<filename> ] { INITIALIZE [ switches ], DESTROY,",
2112 " LIST-CREDENTIALS ...}",
2114 "The INITIALIZE command for Kerberos 5 can include a number of switches;",
2115 "all are optional:",
2117 "AUTH K5 [ /CACHE:<filename> ] INITITIALIZE [ /ADDRESSES:<addr-list>",
2118 " /FORWARDABLE /KERBEROS4 /LIFETIME:<minutes> /PASSWORD:<password>",
2119 " /POSTDATE:<date-time> /PROXIABLE /REALM:<name> /RENEW /RENEWABLE:<minutes>",
2120 " /SERVICE:<name> /VALIDATE <principal> ]",
2122 " All Kerberos 5 INITIALIZE switches are optional:",
2124 " /ADDRESSES:{list of ip-addresses}",
2125 " Specifies a list of IP addresses that should be placed in the Ticket",
2126 " Getting Ticket in addition to the local machine addresses.",
2129 " Requests forwardable tickets.",
2131 " /INSTANCE:<name>",
2132 " Allows an Instance (such as a hostname) to be specified.",
2135 " Instructs Kermit to get Kerberos 4 tickets in addition to Kerberos 5",
2136 " tickets. If Kerberos 5 tickets are not supported by the server, a",
2137 " mild warning is printed and Kerberos 4 tickets are requested.",
2139 " /LIFETIME:<number>",
2140 " Specifies the requested lifetime in minutes for the ticket. If no",
2141 " lifetime is specified, 600 minutes is used. If the lifetime is greater",
2142 " than the maximum supported by the ticket granting service, the resulting",
2143 " lifetime is shortened.",
2146 " Instructs Kermit to not attempt to retrieve Kerberos 4 credentials.",
2148 " /NOT-FORWARDABLE",
2149 " Requests non-forwardable tickets.",
2152 " Requests non-proxiable tickets.",
2154 " /PASSWORD:<string>",
2155 " Allows a password to be included on the command line or in a script",
2156 " file. If no /PASSWORD switch is included, you are prompted on a separate"
2158 " line. The password switch is provided on a use-at-your-own-risk basis",
2159 " for use in automated scripts. WARNING: Passwords should not be stored in"
2163 " /POSTDATE:<date-time>",
2164 " Requests a postdated ticket, valid starting at <date-time>. Postdated",
2165 " tickets are issued with the invalid flag set, and need to be fed back to",
2166 " the KDC before use with the /VALIDATE switch. Type HELP DATE for info",
2167 " on date-time formats.",
2170 " Requests proxiable tickets.",
2173 " Allows an alternative realm to be specified.",
2176 " Requests renewal of a renewable Ticket-Granting Ticket. Note that ",
2177 " an expired ticket cannot be renewed even if it is within its renewable ",
2180 " /RENEWABLE:<number>",
2181 " Requests renewable tickets, with a total lifetime of <number> minutes.",
2183 " /SERVICE:<string>",
2184 " Allows a service other than the ticket granting service to be specified.",
2187 " Requests that the Ticket Granting Ticket in the cache (with the invalid",
2188 " flag set) be passed to the KDC for validation. If the ticket is within",
2189 " its requested time range, the cache is replaced with the validated",
2193 " Your identity in the given or default Kerberos realm, of the form:",
2194 " userid[/instance][@realm] ",
2195 " Can be omitted if it is the same as your username or SET LOGIN USERID",
2196 " value on the client system.",
2198 " Note: Kerberos 5 always attempts to retrieve a Ticket-Getting Ticket (TGT)",
2199 " using the preauthenticated TGT request.",
2201 " AUTHORIZE K5 LIST-CREDENTIALS [ /ADDRESSES /FLAGS /ENCRYPTION ]",
2203 " Shows start time, expiration time, service or principal name, plus",
2204 " the following additional information depending the switches:",
2206 " /ADDRESSES displays the hostnames and/or IP addresses embedded within",
2209 " /FLAGS provides the following information (if applicable) for each ticket:",
2210 " F - Ticket is Forwardable",
2211 " f - Ticket was Forwarded",
2212 " P - Ticket is Proxiable",
2213 " p - Ticket is a Proxy",
2214 " D - Ticket may be Postdated",
2215 " d - Ticket has been Postdated",
2216 " i - Ticket is Invalid",
2217 " R - Ticket is Renewable",
2218 " I - Ticket is the Initial Ticket",
2219 " H - Ticket has been authenticated by Hardware",
2220 " A - Ticket has been Pre-authenticated",
2222 " /ENCRYPTION displays the encryption used by each ticket (if applicable):",
2229 #endif /* CK_KERBEROS */
2232 static char *hmxxassoc[] = {
2233 "ASSOCIATE FILE-CHARACTER-SET <file-character-set> <transfer-character-set>",
2234 " Tells C-Kermit that whenever the given file-character set is selected, and",
2235 " SEND CHARACTER-SET (q.v.) is AUTOMATIC, the given transfer character-set",
2236 " is selected automatically.",
2238 "ASSOCIATE XFER-CHARACTER-SET <xfer-character-set> <file-character-set>",
2239 " Tells C-Kermit that whenever the given transfer-character set is selected,",
2240 " either by command or by an announcer attached to an incoming text file,",
2241 " and SEND CHARACTER-SET is AUTOMATIC, the specified file character-set is",
2242 " to be selected automatically. Synonym: ASSOCIATE TRANSFER-CHARACTER-SET.",
2244 "Use SHOW ASSOCIATIONS to list the current character-set associations, and",
2245 "SHOW CHARACTER-SETS to list the current settings.",
2248 #endif /* NOCSETS */
2250 static char *hmxxpat[] = {
2251 "A \"pattern\" is notation used in a search string when searching through",
2252 "text. C-Kermit uses three kinds of patterns: floating patterns, anchored",
2253 "patterns, and wildcards. Wildcards are anchored patterns that are used to",
2254 "match file names; type HELP WILDCARD to learn about them.",
2256 "In a pattern, certain characters are special:",
2258 "* Matches any sequence of zero or more characters. For example, \"k*t\"",
2259 " matches all strings that start with \"k\" and end with \"t\" including",
2260 " \"kt\", \"kit\", \"knight\", or \"kermit\".",
2263 "% Matches any single character. For example, \"k%%%%t\" matches all strings",
2265 "? Matches any single character. For example, \"k????t\" matches all strings",
2267 " that are exactly 6 characters long and start with \"k\" and end with",
2271 " with \"t\". When typing commands at the prompt, you must precede any",
2272 " question mark to be used for matching by a backslash (\\) to override the",
2273 " normal function of question mark, which is providing menus and file lists.",
2279 " Square brackets enclosing a list of characters matches any character in",
2280 " the list. Example: h[aou]t matches hat, hot, and hut.",
2283 " Square brackets enclosing a range of characters matches any character in",
2284 " the range; a hyphen (-) separates the low and high elements of the range.",
2285 " For example, [a-z] matches any character from a to z.",
2288 " Lists and ranges may be combined. This example matches a, c, d, or any",
2289 " letter from m through z.",
2291 "{string1,string2,...}",
2292 " Braces enclose a list of strings to be matched. For example:",
2293 " ker{mit,nel,beros} matches kermit, kernel, and kerberos. The strings",
2294 " may themselves contain *, ?, [abc], [a-z], or other lists of strings.",
2295 #endif /* CKREGEX */
2296 #endif /* OS2ORUNIX */
2299 "To force a special pattern character to be taken literally, precede it with",
2300 "a backslash, e.g. [a\\-z] matches a, hyphen, and z rather than a through z.",
2302 "A floating pattern can also include the following special characters:",
2304 "^ (First character of pattern) Anchors the pattern at the beginning.",
2305 "$ (Last character of pattern) Anchors the pattern at the end.",
2307 "If a floating pattern does not start with \"^\", the pattern can match",
2308 "anywhere in the string instead of only at the beginning; in other words, a",
2309 "leading \"*\" is assumed. Similarly, if the pattern doesn't end with \"$\",",
2310 "a trailing \"*\" is assumed.",
2312 "The following commands and functions use floating patterns:",
2313 " GREP [ <switches> ] <pattern> <filespec>",
2314 " TYPE /MATCH:<pattern> <file>",
2315 " \\farraylook(<pattern>,<arrayname>)",
2316 " \\fsearch(<pattern>,<string>[,<offset>])",
2317 " \\frsearch(<pattern>,<string>[,<offset>])",
2318 " The /EXCEPT: clause in SEND, GET, DELETE, etc.",
2321 " \\fsearch(abc,xxabcxxx) succeeds because xxabcxx contains abc.",
2322 " \\fsearch(^abc,xxabcxx) fails because xxabcxx does not start with abc.",
2324 "All other commands and functions that use patterns use anchored patterns,",
2325 "meaning that ^ and $ are not treated specially, and * is not assumed at the",
2326 "beginning or end of the pattern. This is true mainly of filename patterns",
2327 "(wildcards), since you would not want a command like \"delete x\" to delete",
2328 "all files whose names contained \"x\"!",
2330 "You can use anchored patterns not only in filenames, but also in SWITCH",
2331 "case labels, in the INPUT and MINPUT commands, and in file binary- and",
2332 "text-patterns for filenames. The IF MATCH pattern is also anchored.",
2336 static char *hmxxwild[] = {
2338 "A \"wildcard\" is a notation used in a filename to match multiple files.",
2339 "For example, in \"send *.txt\" the asterisk is a wildcard. Kermit commands",
2340 "that accept filenames also accepts wildcards, except commands that are",
2341 "allowed to operate on only one file, such as TRANSMIT.",
2342 "This version of Kermit accepts the following wildcards:",
2344 "* Matches any sequence of zero or more characters. For example, \"ck*.c\"",
2345 " matches all files whose names start with \"ck\" and end with \".c\"",
2346 " including \"ck.c\".",
2349 "% Matches any single character. For example, \"ck%.c\" matches all files",
2351 "? Matches any single character. For example, \"ck?.c\" matches all files",
2353 " whose names are exactly 5 characters long and start with \"ck\" and end",
2357 " with \".c\". When typing commands at the prompt, you must precede any",
2358 " question mark to be used for matching by a backslash (\\) to override the",
2359 " normal function of question mark, which is providing menus and file lists.",
2365 " Square brackets enclosing a list of characters matches any character in",
2366 " the list. Example: ckuusr.[ch] matches ckuusr.c and ckuusr.h.",
2369 " Square brackets enclosing a range of characters matches any character in",
2370 " the range; a hyphen (-) separates the low and high elements of the range.",
2371 " For example, [a-z] matches any character from a to z.",
2374 " Lists and ranges may be combined. This example matches a, c, d, or any",
2375 " letter from m through z.",
2377 "{string1,string2,...}",
2378 " Braces enclose a list of strings to be matched. For example:",
2379 " ck{ufio,vcon,cmai}.c matches ckufio.c, ckvcon.c, or ckcmai.c. The strings",
2380 " may themselves contain *, ?, [abc], [a-z], or other lists of strings.",
2381 #endif /* CKREGEX */
2382 #endif /* OS2ORUNIX */
2384 "To force a special pattern character to be taken literally, precede it with",
2385 "a backslash, e.g. [a\\-z] matches a, hyphen, and z rather than a through z.",
2388 "Similar notation can be used in general-purpose string matching. Type HELP",
2389 "PATTERNS for details. Also see HELP SET MATCH.",
2394 static char *hmxxfast[] = {
2395 "FAST, CAUTIOUS, and ROBUST are predefined macros that set several",
2396 "file-transfer parameters at once to achieve the desired file-transfer goal.",
2397 "FAST chooses a large packet size, a large window size, and a fair amount of",
2398 "control-character unprefixing at the risk of possible failure on some",
2399 "connections. FAST is the default tuning in C-Kermit 7.0 and later. In case",
2400 "FAST file transfers fail for you on a particular connection, try CAUTIOUS.",
2401 "If that fails too, try ROBUST. You can also change the definitions of each",
2402 "macro with the DEFINE command. To see the current definitions, type",
2403 "\"show macro fast\", \"show macro cautious\", or \"show macro robust\".",
2409 static char * hmxxpurge[] = {
2410 "Syntax: PURGE [ switches ] [ filespec ]",
2411 " Runs the DCL PURGE command. Switches and filespec are not parsed or",
2412 " verified by Kermit, but passed directly to DCL.",
2417 static char * hmxxpurge[] = {
2418 "Syntax: PURGE [ switches ] [ filespec ]",
2419 " Deletes backup files; that is, files whose names end in \".~n~\", where",
2420 " n is a number. PURGE by itself deletes all backup files in the current",
2421 " directory. Switches:",
2426 " Specifies that only those files created after the given date-time are",
2428 " Specifies that only those files modified after the given date-time are",
2430 " to be purged. HELP DATE for info about date-time formats.",
2432 "/BEFORE:date-time",
2434 " Specifies that only those files modified before the given date-time",
2436 " Specifies that only those files modified before the given date-time",
2438 " are to be purged.",
2440 "/NOT-AFTER:date-time",
2442 " Specifies that only those files modified at or before the given date-time",
2444 " Specifies that only those files modified at or before the given date-time",
2446 " are to be purged.",
2448 "/NOT-BEFORE:date-time",
2450 " Specifies that only those files modified at or after the given date-time",
2452 " Specifies that only those files modified at or after the given date-time",
2454 " are to be purged.",
2456 "/LARGER-THAN:number",
2457 " Specifies that only those files longer than the given number of bytes are",
2460 "/SMALLER-THAN:number",
2461 " Specifies that only those files smaller than the given number of bytes are",
2465 " Specifies that any files whose names match the pattern, which can be a",
2466 " regular filename or may contain wildcards, are not to be purged. To",
2467 " specify multiple patterns (up to 8), use outer braces around the group",
2468 " and inner braces around each pattern:",
2470 " /EXCEPT:{{pattern1}{pattern2}...}",
2474 " Include (purge) files whose names begin with \".\".",
2477 " Skip (don't purge) files whose names begin with \".\".",
2479 #endif /* UNIXOROSK */
2482 " Descends through the current or specified directory tree.",
2484 #endif /* RECURSIVE */
2486 " Retain the 'n' most recent (highest-numbered) backup files for each file.",
2487 " By default, none are kept. If /KEEP is given without a number, 1 is used.",
2490 " Display each file as it is processed and say whether it is purged or kept.",
2491 " Synonyms: /LOG, /VERBOSE.",
2494 " The PURGE command should operate silently (default).",
2495 " Synonyms: /NOLOG, /QUIET.",
2498 " Print heading and summary information.",
2501 " Don't print heading and summary information.",
2504 " When /LIST is in effect, pause at the end of each screenful, even if",
2505 " COMMAND MORE-PROMPTING is OFF.",
2508 " Don't pause, even if COMMAND MORE-PROMPTING is ON.",
2511 " Interactively ask permission to delete each backup file.",
2514 " Purge backup files without asking permission.",
2517 " Inhibits the actual deletion of files; use to preview which files would",
2518 " actually be deleted. Implies /LIST.",
2520 "Use SET OPTIONS PURGE [ switches ] to change defaults; use SHOW OPTIONS to",
2521 "display customized defaults. Also see HELP DELETE, HELP WILDCARD.",
2524 #endif /* CKPURGE */
2527 static char *hmxxclo[] = {
2528 "Syntax: CLOSE [ item ]",
2529 " Close the indicated item. The default item is CONNECTION, which is the",
2530 " current SET LINE or SET HOST connection. The other items are:",
2533 " CX-LOG (connection log, opened with LOG CX)",
2534 #endif /* CKLOGDIAL */
2536 " SESSION-LOG (opened with LOG SESSION)",
2537 #endif /* NOLOCAL */
2539 " TRANSACTION-LOG (opened with LOG TRANSACTIONS)",
2541 " PACKET-LOG (opened with LOG PACKETS)",
2543 " DEBUG-LOG (opened with LOG DEBUG)",
2546 " READ-FILE (opened with OPEN READ)",
2547 " WRITE-FILE (opened with OPEN WRITE or OPEN APPEND)",
2550 "Type HELP LOG and HELP OPEN for further info.",
2555 static char * hmxxlearn[] = {
2556 "Syntax: LEARN [ /ON /OFF /CLOSE ] [ filename ]",
2557 " Records a login script. If you give a filename, the file is opened for",
2558 " subsequent recording. If you don't give any switches, /ON is assumed.",
2559 " /ON enables recording to the current file (if any); /OFF disables",
2560 " recording. /CLOSE closes the current file (if any). After LEARN /CLOSE",
2561 " or exit from Kermit, your script is available for execution by the TAKE",
2565 #endif /* CKLEARN */
2568 static char *hmxxminp[] = {
2569 "Syntax: MINPUT n [ string1 [ string2 [ ... ] ] ]",
2570 "Example: MINPUT 5 Login: {Username: } {NO CARRIER} BUSY RING",
2571 " For use in script programs. Waits up to n seconds for any one of the",
2572 " strings to arrive on the communication device. If no strings are given,",
2573 " the command waits for any character at all to arrive. Strings are",
2574 " separated by spaces; use { braces } for grouping. If any of the strings",
2575 " is encountered within the timeout interval, the command succeeds and the",
2576 " \\v(minput) variable is set to the number of the string that was matched:",
2577 " 1, 2, 3, etc. If none of the strings arrives, the command times out,",
2578 " fails, and \\v(minput) is set to 0. If the timeout interval is 0 the",
2579 " MINPUT command does not wait; i.e. the given text must already be",
2580 " available for reading for the MINPUT command to succeed. If the interval",
2581 " is negative, the MINPUT command waits forever.",
2583 "Also see: INPUT, REINPUT, SET INPUT.",
2585 #endif /* CK_MINPUT */
2588 static char *hmxxcon[] = {
2589 "Syntax: CONNECT (or C, or CQ) [ switches ]",
2590 " Connect to a remote computer via the serial communications device given in",
2592 " the most recent SET PORT command, or to the network host named in the most",
2594 " the most recent SET LINE command, or to the network host named in the most",
2596 " recent SET HOST command. Type the escape character followed by C to get",
2597 " back to the C-Kermit prompt, or followed by ? for a list of CONNECT-mode",
2599 " escape commands. You can also assign the \\Kexit verb to the key or",
2600 " key-combination of your choice; by default it is assigned to Alt-x.",
2602 " escape commands.",
2604 "Include the /QUIETLY switch to suppress the informational message that",
2605 "tells you how to escape back, etc. CQ is a synonym for CONNECT /QUIETLY.",
2608 "Other switches include:",
2612 " One or more strings to look for that will cause automatic return to",
2613 " command mode. To specify one string, just put it right after the",
2614 " colon, e.g. \"/TRIGGER:Goodbye\". If the string contains any spaces, you",
2615 " must enclose it in braces, e.g. \"/TRIGGER:{READY TO SEND...}\". To",
2616 " specify more than one trigger, use the following format:",
2618 " /TRIGGER:{{string1}{string2}...{stringn}}",
2620 " Upon return from CONNECT mode, the variable \\v(trigger) is set to the",
2621 " trigger string, if any, that was actually encountered. This value, like",
2622 " all other CONNECT switches applies only to the CONNECT command with which",
2623 " it is given, and overrides (temporarily) any global SET TERMINAL TRIGGER",
2624 " string that might be in effect.",
2625 #endif /* CK_TRIGGER */
2628 "/IDLE-LIMIT:number",
2629 " The number of seconds of idle time, after which Kermit returns",
2630 " automatically to command mode; default 0 (no limit).",
2632 "/IDLE-INTERVAL:number",
2633 " The number of seconds of idle time, after which Kermit automatically",
2634 " transmits the idle string.",
2636 "/IDLE-STRING:string",
2637 " The string to transmit whenever the idle interval has passed.",
2639 "/TIME-LIMIT:number",
2640 " The maximum number of seconds for which the CONNECT session may last.",
2641 " The default is 0 (no limit). If a nonzero number is given, Kermit returns",
2642 " automatically to command mode after this many seconds.",
2645 #endif /* NOLOCAL */
2647 static char *hmxxmget[] = {
2648 "Syntax: MGET [ switches... ] remote-filespec [ remote-filespec ... ]",
2650 "Just like GET (q.v.) except allows a list of remote file specifications,",
2651 "separated by spaces.",
2655 static char *hmxxget[] = {
2656 "Syntax: GET [ switches... ] remote-filespec [ as-name ]",
2657 " Tells the other Kermit, which must be in (or support autoswitching into)",
2658 " server mode, to send the named file or files. If the remote-filespec or",
2659 " the as-name contain spaces, they must be enclosed in braces. If as-name",
2660 " is the name of an existing local directory, incoming files are placed in",
2661 " that directory; if it is the name of directory that does not exist, Kermit",
2662 " tries to create it. Optional switches include:",
2665 " Specifies \"text\" as the name to store the incoming file under, or",
2666 " directory to store it in. You can also specify the as-name as the second",
2667 " filename on the GET command line.",
2670 " Performs this transfer in binary mode without affecting the global",
2674 " Receives the file into the standard input of a command, rather than saving",
2675 " it on disk. The /AS-NAME or the second \"filename\" on the GET command",
2676 " line is interpreted as the name of a command.",
2679 " Asks the other Kermit to delete the file (or each file in the group)",
2680 " after it has been transferred successfully.",
2683 " Specifies that any files whose names match the pattern, which can be a",
2684 " regular filename, or may contain \"*\" and/or \"?\" metacharacters,",
2685 " are to be refused. To specify multiple patterns (up to 8), use outer",
2686 " braces around the group, and inner braces around each pattern:",
2688 " /EXCEPT:{{pattern1}{pattern2}...}",
2690 "/FILENAMES:{CONVERTED,LITERAL}",
2691 " Overrides the global SET FILE NAMES setting for this transfer only.",
2694 " Causes the incoming file to passed through the given command (standard",
2695 " input/output filter) before being written to disk.",
2699 " Transfer in image mode.",
2704 " VMS and OS/2 only: Specifies labeled transfer mode.",
2706 #endif /* CK_LABELED */
2708 "/MOVE-TO:directory-name",
2709 " Specifies that each file that arrives should be moved to the specified",
2710 " directory after, and only if, it has been received successfully.",
2712 "/PATHNAMES:{OFF,ABSOLUTE,RELATIVE,AUTO}",
2713 " Overrides the global SET RECEIVE PATHNAMES setting for this transfer.",
2716 " Overrides the TRANSFER PIPES setting for this command only. ON allows",
2717 " reception of files with names like \"!tar xf -\" to be automatically",
2718 " directed to a pipeline.",
2721 " When sending in local mode, this suppresses the file-transfer display.",
2724 " Used to recover from a previously interrupted transfer; GET /RECOVER",
2725 " is equivalent REGET. Works only in binary mode.",
2728 " Tells the server to descend through the directory tree when locating",
2729 " the files to be sent.",
2731 "/RENAME-TO:string",
2732 " Specifies that each file that arrives should be renamed as specified",
2733 " after, and only if, it has been received successfully. The string should",
2734 " normally contain variables like \\v(filename) or \\v(filenum).",
2737 " Performs this transfer in text mode without affecting the global",
2741 " Inhibits character-set translation of incoming text files for the duration",
2742 " of the GET command without affecting subsequent commands.",
2744 "Also see HELP MGET, HELP SEND, HELP RECEIVE, HELP SERVER, HELP REMOTE.",
2747 static char *hmxxlg[] = {
2748 "Syntax: LOG (or L) log-type [ filename [ { NEW, APPEND } ] ]",
2750 "Record information in a log file:",
2754 " Connections made with SET LINE, SET PORT, SET HOST, DIAL, TELNET, etc.",
2755 " The default filename is CX.LOG in your home directory and APPEND is the",
2756 " default mode for opening.",
2758 #endif /* CKLOGDIAL */
2761 " Debugging information, to help track down bugs in the C-Kermit program.",
2762 " The default log name is debug.log in current directory.",
2766 " Kermit packets, to help with protocol problems. The default filename is",
2767 " packet.log in current directory.",
2771 " Records your CONNECT session (default: session.log in current directory).",
2773 #endif /* NOLOCAL */
2776 " Names and statistics about files transferred (default: transact.log in",
2777 " current directory; see HELP SET TRANSACTION-LOG for transaction-log format",
2781 "If you include the APPEND keyword after the filename, the existing log file,",
2782 "if any, is appended to; otherwise a new file is created (except APPEND is",
2783 "the default for the connection log). Use CLOSE <keyword> to stop logging.",
2786 "Note: The filename can also be a pipe, e.g.:",
2788 " log transactions |lpr",
2789 " log debug {| grep \"^TELNET\" > debug.log}",
2791 "Braces are required if the pipeline or filename contains spaces.",
2792 #endif /* OS2ORUNIX */
2796 static char *hmxxlogi[] = { "\
2797 Syntax: SCRIPT text",
2798 " A limited and cryptic \"login assistant\", carried over from old C-Kermit",
2799 " releases for comptability, but not recommended for use. Instead, please",
2800 " use the full script programming language described in chapters 17-19 of",
2801 " \"Using C-Kermit\".",
2803 " Login to a remote system using the text provided. The login script",
2804 " is intended to operate similarly to UNIX uucp \"L.sys\" entries.",
2805 " A login script is a sequence of the form:",
2807 " expect send [expect send] . . .",
2809 " where 'expect' is a prompt or message to be issued by the remote site, and",
2810 " 'send' is the names, numbers, etc, to return. The send may also be the",
2811 " keyword EOT to send Control-D, or BREAK (or \\\\b) to send a break signal.",
2812 " Letters in send may be prefixed by ~ to send special characters:",
2814 " ~b backspace, ~s space, ~q '?', ~n linefeed, ~r return, ~c don\'t",
2815 " append a return, and ~o[o[o]] for octal of a character. As with some",
2816 " UUCP systems, sent strings are followed by ~r unless they end with ~c.",
2818 " Only the last 7 characters in each expect are matched. A null expect,",
2819 " e.g. ~0 or two adjacent dashes, causes a short delay. If you expect",
2820 " that a sequence might not arrive, as with uucp, conditional sequences",
2821 " may be expressed in the form:",
2823 " -send-expect[-send-expect[...]]",
2825 " where dashed sequences are followed as long as previous expects fail.",
2827 #endif /* NOSCRIPT */
2830 static char * hmxxtyp[] = {
2831 "Syntax: TYPE [ switches... ] file",
2832 " Displays a file on the screen. Pauses automatically at end of each",
2833 " screenful if COMMAND MORE-PROMPTING is ON. Optional switches:",
2836 " Pause at the end of each screenful even if COMMAND MORE-PROMPTING OFF.",
2839 " Don't pause at the end of each screen even if COMMAND MORE-PROMPTING ON."
2842 " Only type the first 'n' lines of the file.",
2844 " Only type the last 'n' lines of the file.",
2846 " Only type lines that match the given pattern. HELP WILDCARDS for info",
2847 " info about patterns. /HEAD and /TAIL apply after /MATCH.",
2849 " Print the given string at the beginning of each line.",
2851 " Add line numbers (conflicts with /PREFIX)",
2853 " Truncate each line at the given column number before printing.",
2855 " Or when combined with /GUI specifies the width of the dialog box.",
2857 " When combined with /GUI specifies the height of the dialog box.",
2859 " Specifies the title to use for the dialog box.",
2862 " Count lines (and matches) and print the count(s) but not the lines.",
2864 " /CHARACTER-SET:name",
2865 " Translates from the named character set.",
2867 " /TRANSLATE-TO:name",
2868 " Translates to the named character set (default = current file charset).",
2871 " Inhibits character-set translation.",
2872 #endif /* UNICODE */
2874 " Sends results to the given file. If this switch is omitted, the",
2875 " results appear on your screen. This switch overrides any express or",
2876 " implied /PAGE switch.",
2878 "You can use SET OPTIONS TYPE to set the defaults for /PAGE or /NOPAGE and",
2879 "/WIDTH. Use SHOW OPTIONS to see current TYPE options.",
2883 static char * hmxxcle[] = {
2884 "Syntax: CLEAR [ item-name ]",
2886 "Clears the named item. If no item is named, DEVICE-AND-INPUT is assumed.",
2888 " ALARM Clears any pending alarm (see SET ALARM).",
2890 " APC-STATUS Clears Application Program Command status.",
2893 " BINARY-PATTERNS Clears the file binary-patterns list.",
2894 #endif /* PATTERNS */
2896 " COMMAND-SCREEN Clears the current command screen.",
2898 " DEVICE Clears the current port or network input buffer.",
2899 " DEVICE-AND-INPUT Clears both the device and the INPUT buffer.",
2900 " DIAL-STATUS Clears the \\v(dialstatus) variable.",
2902 INPUT Clears the INPUT-command buffer and the \\v(input) variable.",
2903 " KEYBOARD-BUFFER Clears the command terminal keyboard input buffer.",
2906 SCROLLBACK empties the scrollback buffer including the current screen.",
2908 " SEND-LIST Clears the current SEND list (see ADD).",
2911 TERMINAL-SCREEN Clears the current screen a places it into the scrollback.",
2915 " TEXT-PATTERNS Clears the file text-patterns list.",
2916 #endif /* PATTERNS */
2918 #endif /* NOFRILLS */
2920 static char * hmxxdate[] = {
2921 "Syntax: DATE [ date-time [ timezone ] ] [ delta-time ]",
2922 " Prints a date-time in standard format: yyyymmdd_hh:mm:ss.",
2923 " Various date-time formats are accepted:",
2925 " . The date, if given, must precede the time.",
2926 " . The year must be four digits or else a 2-digit format dd mmm yy,",
2927 " in which case if (yy < 50) yyyy = yy + 2000; else yyyy = yy + 1900.",
2928 " . If the year comes first, the second field is the month.",
2929 " . The day, month, and year may be separated by spaces, /, -, or underscore."
2930 ," . The date and time may be separated by spaces or underscore.",
2931 " . The month may be numeric (1 = January) or spelled out or abbreviated in",
2933 " . The time may be in 24-hour format or 12-hour format.",
2934 " . If the hour is 12 or less, AM is assumed unless AM or PM is included.",
2935 " . If the date is omitted but a time is given, the current date is supplied."
2937 " . If the time is given but date omitted, 00:00:00 is supplied.",
2938 " . If both the date and time are omitted, the current date and time are",
2941 " The following shortcuts can also be used in place of dates:",
2944 " Today's date, optionally followed by a time; 00:00:00 if no time given.",
2947 " Yesterday's date, optionally followed by a time (default 00:00:00).",
2950 " Tomorrows's date, optionally followed by a time (default 00:00:00).",
2952 " Timezone specifications are similar to those used in e-mail and HTTP",
2953 " headers, either a USA timezone name, e.g. EST or a signed four-digit",
2954 " timezone offset, {+,-}hhmm, e.g., -0500; it is used to convert date-time,"
2956 " a local time in that timezone, to GMT which is then converted to the",
2957 " local time at the host. If no timezone is given, the date-time is local."
2960 " Delta times are given as {+,-}[number date-units][hh[:mm[:ss]]]",
2961 " A date in the future/past relative to the date-time; date-units may be",
2962 " DAYS, WEEKS, MONTHS, YEARS: +3days, -7weeks, +3:00, +1month 8:00.",
2964 "All the formats shown above are acceptable as arguments to date-time switches"
2966 "such as /AFTER: or /BEFORE:, and to functions such as \\fcvtdate(),",
2967 "\\fdiffdate(), and \\futcdate(), that take date-time strings as arguments.",
2973 static char * hmxxsen[] = {
2974 "Syntax: SEND (or S) [ switches...] [ filespec [ as-name ] ]",
2975 " Sends the file or files specified by filespec. If the filespec is omitted",
2976 " the SEND-LIST is used (HELP ADD for more info). The filespec may contain",
2977 " wildcard characters. An 'as-name' may be given to specify the name(s)",
2978 " the files(s) are sent under; if the as-name is omitted, each file is",
2979 " sent under its own name. Also see HELP MSEND, HELP WILDCARD.",
2980 " Optional switches include:",
2983 "/ARRAY:<arrayname>",
2984 " Specifies that the data to be sent comes from the given array, such as",
2985 " \\&a[]. A range may be specified, e.g. SEND /ARRAY:&a[100:199]. Leave",
2986 " the brackets empty or omit them altogether to send the whole 1-based array."
2988 " Include /TEXT to have Kermit supply a line terminator at the end of each",
2989 " array element (and translate character sets if character-set translations",
2990 " are set up), or /BINARY to treat the array as one long string of characters"
2992 " to be sent as-is. If an as-name is not specified, the array is sent with",
2993 " the name _ARRAY_X_, where \"X\" is replaced by actual array letter.",
2998 " Specifies <text> as the name to send the file under instead of its real",
2999 " name. This is equivalent to giving an as-name after the filespec.",
3002 " Performs this transfer in binary mode without affecting the global",
3006 " Performs this transfer in text mode without affecting the global",
3010 " Inhibits character-set translation for text files for the duration of",
3011 " the SEND command without affecting subsequent commands.",
3014 " Skip (don't send) Kermit or EMACS backup files (files with names that",
3015 " end with .~n~, where n is a number).",
3019 " Include (send) files whose names begin with \".\".",
3022 " Don't send files whose names begin with \".\".",
3025 " Send files that are pointed to by symbolic links.",
3028 " Skip over symbolic links (default).",
3030 #endif /* UNIXOROSK */
3034 " Performs this transfer in image mode without affecting the global",
3040 " Performs this transfer in labeled mode without affecting the global",
3043 #endif /* CK_LABELED */
3045 " Sends the output from a command, rather than the contents of a file.",
3046 " The first \"filename\" on the SEND command line is interpreted as the name",
3047 " of a command; the second (if any) is the as-name.",
3049 "/FILENAMES:{CONVERTED,LITERAL}",
3050 " Overrides the global SET FILE NAMES setting for this transfer only.",
3052 "/PATHNAMES:{OFF,ABSOLUTE,RELATIVE}",
3053 " Overrides the global SET SEND PATHNAMES setting for this transfer.",
3056 " Specifies a command \
3057 (standard input/output filter) to pass the file through",
3058 " before sending it.",
3061 " Deletes the file (or each file in the group) after it has been sent",
3062 " successfully (applies only to real files).",
3065 " When sending in local mode, this suppresses the file-transfer display.",
3068 " Used to recover from a previously interrupted transfer; SEND /RECOVER",
3069 " is equivalent RESEND (use in binary mode only).",
3072 " Tells C-Kermit to look not only in the given or current directory for",
3073 " files that match the filespec, but also in all its subdirectories, and",
3074 " all their subdirectories, etc.",
3077 " Tells C-Kermit to rename each source file that is sent successfully to",
3078 " the given name (usually you should include \\v(filename) in the new name,",
3079 " which is replaced by the original filename.",
3081 "/MOVE-TO:directory",
3082 " Tells C-Kermit to move each source file that is sent successfully to",
3083 " the given directory.",
3086 " Starts sending the file from the given byte position.",
3087 " SEND /STARTING:n filename is equivalent to PSEND filename n.",
3090 " Specifies the subject of an email message, to be used with /MAIL. If the",
3091 " text contains spaces, it must be enclosed in braces.",
3094 " Sends the file as e-mail to the given address; use with /SUBJECT:.",
3097 " Sends the file to be printed, with optional options for the printer.",
3101 " Uses the given protocol to send the file (Kermit, Zmodem, etc) for this",
3102 " transfer without changing global protocol.",
3107 " Specifies that only those files created after the given date-time are",
3109 " Specifies that only those files modified after the given date-time are",
3111 " to be sent. HELP DATE for info about date-time formats.",
3113 "/BEFORE:date-time",
3115 " Specifies that only those files modified before the given date-time",
3117 " Specifies that only those files modified before the given date-time",
3121 "/NOT-AFTER:date-time",
3123 " Specifies that only those files modified at or before the given date-time",
3125 " Specifies that only those files modified at or before the given date-time",
3129 "/NOT-BEFORE:date-time",
3131 " Specifies that only those files modified at or after the given date-time",
3133 " Specifies that only those files modified at or after the given date-time",
3137 "/LARGER-THAN:number",
3138 " Specifies that only those files longer than the given number of bytes are",
3141 "/SMALLER-THAN:number",
3142 " Specifies that only those files smaller than the given number of bytes are",
3146 " Specifies that any files whose names match the pattern, which can be a",
3147 " regular filename, or may contain \"*\" and/or \"?\" metacharacters,",
3148 " are not to be sent. To specify multiple patterns (up to 8), use outer",
3149 " braces around the group, and inner braces around each pattern:",
3151 " /EXCEPT:{{pattern1}{pattern2}...}",
3153 "/TYPE:{ALL,TEXT,BINARY}",
3154 " Send only files of the given type (see SET FILE SCAN).",
3156 "/LISTFILE:filename",
3157 " Specifies the name of a file that contains the list of names of files",
3158 " that are to be sent. The filenames should be listed one name per line",
3159 " in this file (but a name can contain wildcards).",
3161 "Also see HELP RECEIVE, HELP GET, HELP SERVER, HELP REMOTE.",
3164 static char *hmxxrc[] = {
3165 "Syntax: RECEIVE (or R) [ switches... ] [ as-name ]",
3166 " Wait for a file to arrive from the other Kermit, which must be given a",
3167 " SEND command. If the optional as-name is given, the incoming file or",
3168 " files are stored under that name, otherwise it will be stored under",
3170 " the name it arrives with.",
3173 " the name it arrives with. If the filespec denotes a disk and/or",
3174 " directory, the incoming file or files will be stored there.",
3176 " the name it arrives with. If the filespec denotes a directory, the",
3177 " incoming file or files will be placed in that directory.",
3179 #endif /* CK_TMPDIR */
3181 "Optional switches include:",
3184 " Specifies \"text\" as the name to store the incoming file under.",
3185 " You can also specify the as-name as a filename on the command line.",
3188 " Skips text-mode conversions unless the incoming file arrives with binary",
3192 " Receives the file into the standard input of a command, rather than saving",
3193 " it on disk. The /AS-NAME or the \"filename\" on the RECEIVE command line",
3194 " is interpreted as the name of a command.",
3197 " Specifies that any files whose names match the pattern, which can be a",
3198 " regular filename, or may contain \"*\" and/or \"?\" metacharacters,",
3199 " are to be refused. To specify multiple patterns (up to 8), use outer",
3200 " braces around the group, and inner braces around each pattern:",
3202 " /EXCEPT:{{pattern1}{pattern2}...}",
3204 "/FILENAMES:{CONVERTED,LITERAL}",
3205 " Overrides the global SET FILE NAMES setting for this transfer only.",
3208 " Causes the incoming file to passed through the given command (standard",
3209 " input/output filter) before being written to disk.",
3213 " Receives the file in image mode.",
3218 " Specifies labeled transfer mode.",
3220 #endif /* CK_LABELED */
3222 "/MOVE-TO:directory-name",
3223 " Specifies that each file that arrives should be moved to the specified",
3224 " directory after, and only if, it has been received successfully.",
3226 "/PATHNAMES:{OFF,ABSOLUTE,RELATIVE,AUTO}",
3227 " Overrides the global SET RECEIVE PATHNAMES setting for this transfer.",
3230 " Overrides the TRANSFER PIPES setting for this command only. ON allows",
3231 " reception of files with names like \"!tar xf -\" to be automatically",
3232 " directed to a pipeline.",
3235 " Use the given protocol to receive the incoming file(s).",
3238 " When sending in local mode, this suppresses the file-transfer display.",
3241 " Equivalent to /PATHNAMES:RELATIVE.",
3243 "/RENAME-TO:string",
3244 " Specifies that each file that arrives should be renamed as specified",
3245 " after, and only if, it has been received successfully. The string should",
3246 " normally contain variables like \\v(filename) or \\v(filenum).",
3249 " Forces text-mode conversions unless the incoming file has the binary",
3253 " Inhibits character-set translation of incoming text files for the duration",
3254 " of the RECEIVE command without affecting subsequent commands.",
3256 "Also see HELP SEND, HELP GET, HELP SERVER, HELP REMOTE.",
3260 static char *hmxxrsen = "\
3261 Syntax: RESEND filespec [name]\n\n\
3262 Resend the file or files, whose previous transfer was interrupted.\n\
3263 Picks up from where previous transfer left off, IF the receiver was told\n\
3264 to SET FILE INCOMPLETE KEEP. Only works for binary-mode transfers.\n\
3265 Requires the other Kermit to have RESEND capability.";
3267 static char *hmxxrget = "\
3268 Syntax: REGET filespec\n\n\
3269 Ask a server to RESEND a file to C-Kermit.";
3271 static char *hmxxpsen = "\
3272 Syntax: PSEND filespec position [name]\n\n\
3273 Just like SEND, except sends the file starting at the given byte position.";
3274 #endif /* NORESEND */
3277 static char *hmxxmse[] = {
3278 "Syntax: MSEND [ switches... ] filespec [ filespec [ ... ] ]",
3279 " Sends the files specified by the filespecs. One or more filespecs may be",
3280 " listed, separated by spaces. Any or all filespecs may contain wildcards",
3281 " and they may be in different directories. Alternative names cannot be",
3282 " given. Switches include /BINARY /DELETE /MAIL /PROTOCOL /QUIET /RECOVER",
3283 " /TEXT /TYPE; see HELP SEND for descriptions.",
3286 #endif /* NOMSEND */
3288 static char *hmxxadd[] = {
3290 "ADD SEND-LIST filespec [ <mode> [ <as-name> ] ]",
3291 " Adds the specified file or files to the current SEND list. Use SHOW",
3292 " SEND-LIST and CLEAR SEND-LIST to display and clear the list; use SEND",
3293 " by itself to send the files from it.",
3295 #endif /* NOMSEND */
3297 "ADD BINARY-PATTERNS [ <pattern> [ <pattern> ... ] ]",
3298 " Adds the pattern(s), if any, to the SET FILE BINARY-PATTERNS list.",
3300 "ADD TEXT-PATTERNS [ <pattern> [ <pattern> ... ] ]",
3301 " Adds the pattern(s), if any, to the SET FILE TEXT-PATTERNS list.",
3302 " Use SHOW PATTERNS to see the lists. See HELP SET FILE for further info.",
3303 #endif /* PATTERNS */
3306 static char *hmxxremv[] = {
3308 "REMOVE BINARY-PATTERNS [ <pattern> [ <pattern> ... ] ]",
3309 " Removes the pattern(s), if any, from the SET FILE BINARY-PATTERNS list",
3311 "REMOVE TEXT-PATTERNS [ <pattern> [ <pattern> ... ] ]",
3312 " Removes the given patterns from the SET FILE TEXT-PATTERNS list.",
3313 " Use SHOW PATTERNS to see the lists. See HELP SET FILE for further info.",
3314 #endif /* PATTERNS */
3319 static char *hmxxser = "Syntax: SERVER\n\
3320 Enter server mode on the current connection. All further commands\n\
3321 are taken in packet form from the other Kermit program. Use FINISH,\n\
3322 BYE, or REMOTE EXIT to get C-Kermit out of server mode.";
3323 #endif /* NOSERVER */
3325 static char *hmhset[] = {
3326 " The SET command establishes communication, file, scripting, or other",
3327 " parameters. The SHOW command can be used to display the values of",
3328 " SET parameters. Help is available for each individual parameter;",
3329 " type HELP SET ? to see what's available.",
3333 static char *hmhskey[] = {
3334 "Syntax: SET KEY k text",
3335 "Or: SET KEY CLEAR",
3336 " Configure the key whose \"scan code\" is k to send the given text when",
3337 " pressed during CONNECT mode. SET KEY CLEAR restores all the default",
3338 " key mappings. If there is no text, the default key binding is restored",
3340 " for the key k. SET KEY mappings take place before terminal character-set",
3344 #endif /* NOCSETS */
3347 " The text may contain \"\\Kverbs\" to denote actions, to stand for DEC",
3348 " keypad, function, or editing keys, etc. For a list of available keyboard",
3349 " verbs, type SHOW KVERBS.",
3352 " To find out the scan code and mapping for a particular key, use the",
3353 " SHOW KEY command.",
3355 #endif /* NOSETKEY */
3357 static char *hmxychkt[] = { "Syntax: SET BLOCK-CHECK type",
3359 " Type of packet block check to be used for error detection, 1, 2, 3, or",
3360 " BLANK-FREE-2. Type 1 is standard, and catches most errors. Types 2 and 3",
3361 " specify more rigorous checking at the cost of higher overhead. The",
3362 " BLANK-FREE-2 type is the same as Type 2, but is guaranteed to contain no",
3366 static char * hmxydeb[] = {
3367 "Syntax: SET DEBUG { SESSION, ON, OFF, TIMESTAMP }",
3371 " Opens a debug log file named debug.log in the current directory.",
3372 " Use LOG DEBUG if you want specify a different log file name or path.",
3374 " (Has no effect in this version of Kermit.)",
3378 " Stops debug logging and session debugging.",
3380 "SET DEBUG SESSION",
3382 " Displays control and 8-bit characters symbolically during CONNECT mode.",
3383 " Equivalent to SET TERMINAL DEBUG ON.",
3385 " (Has no effect in this version of Kermit.)",
3386 #endif /* NOLOCAL */
3388 "SET DEBUG TIMESTAMP { ON, OFF }",
3389 " Enables/Disables timestamps on debug log entries.",
3393 static char *hmxyqctl[] = {
3394 "Syntax: SET CONTROL-CHARACTER { PREFIXED, UNPREFIXED } { <code>..., ALL }",
3396 " <code> is the numeric ASCII code for a control character 1-31,127-159,255."
3398 " The word \"ALL\" means all characters in this range.",
3400 " PREFIXED <code> means the given control character must be converted to a",
3401 " printable character and prefixed, the default for all control characters.",
3403 " UNPREFIXED <code> means you think it is safe to send the given control",
3404 " character as-is, without a prefix. USE THIS OPTION AT YOUR OWN RISK!",
3406 " SHOW CONTROL to see current settings. SET CONTROL PREFIXED ALL is",
3407 " recommended for safety. You can include multiple <code> values in one",
3408 " command, separated by spaces.",
3410 #endif /* CK_SPEED */
3413 static char *hxymodm[] = {
3414 "Syntax: SET MODEM <parameter> <value> ...",
3416 "Note: Many of the SET MODEM parameters are configured automatically when",
3417 "you SET MODEM TYPE, according to the modem's capabilities. SHOW MODEM to",
3418 "see them. Also see HELP DIAL and HELP SET DIAL.",
3420 "SET MODEM TYPE <name>",
3422 " Tells Kermit which kind of modem you have, so it can issue the",
3423 " appropriate modem-specific commands for configuration, dialing, and",
3424 " hanging up. For a list of the modem types known to Kermit, type \"set",
3425 " modem type ?\". The default modem type is GENERIC, which should work",
3426 " with any AT command-set modem that is configured for error correction,",
3427 " data compression, and hardware flow control. Use SET MODEM TYPE NONE",
3428 " for direct serial, connections. Use SET MODEM TYPE USER-DEFINED to use",
3429 " a type of modem that is not built in to Kermit, and then use SET MODEM",
3430 " CAPABILITIES, SET MODEM, DIAL-COMMAND, and SET MODEM COMMAND to tell",
3431 " Kermit how to configure and control it.",
3435 "SET MODEM CAPABILITIES <list>",
3436 " Use this command for changing Kermit's idea of your modem's capabilities,",
3437 " for example, if your modem is supposed to have built-in error correction",
3438 " but in fact does not. Also use this command to define the capabilities",
3439 " of a USER-DEFINED modem. Capabilities are:",
3442 " DC data-compression",
3443 " EC error-correction",
3444 " HWFC hardware-flow",
3445 " ITU v25bis-commands",
3446 " SWFC software-flow",
3448 " SB speed-buffering",
3451 "SET MODEM CARRIER-WATCH { AUTO, ON, OFF }",
3452 " Synonym for SET CARRIER-WATCH (q.v.)",
3454 "SET MODEM COMPRESSION { ON, OFF }",
3455 " Enables/disables the modem's data compression feature, if any.",
3457 "SET MODEM DIAL-COMMAND <text>",
3458 " The text replaces Kermit's built-in modem dialing command. It must",
3459 " include '%s' (percent s) as a place-holder for the telephone numbers",
3460 " given in your DIAL commands.",
3462 "SET MODEM ERROR-CORRECTION { ON, OFF }",
3463 " Enables/disables the modem's error-correction feature, if any.",
3465 "SET MODEM ESCAPE-CHARACTER number",
3466 " Numeric ASCII value of modem's escape character, e.g. 43 for '+'.",
3467 " For Hayes-compatible modems, Kermit uses three copies, e.g. \"+++\".",
3469 "SET MODEM FLOW-CONTROL {AUTO, NONE, RTS/CTS, XON/XOFF}",
3470 " Selects the type of local flow control to be used by the modem.",
3472 "SET MODEM HANGUP-METHOD { MODEM-COMMAND, RS232-SIGNAL, DTR }",
3473 " How hangup operations should be done. MODEM-COMMAND means try to",
3474 " escape back to the modem's command processor and give a modem-specific",
3475 " hangup command. RS232-SIGNAL means turn off the DTR signal. DTR is a",
3476 " synonym for RS232-SIGNAL.",
3478 "SET MODEM KERMIT-SPOOF {ON, OFF}",
3479 " If the selected modem type supports the Kermit protocol directly,",
3480 " use this command to turn its Kermit protocol function on or off.",
3482 "SET MODEM MAXIMUM-SPEED <number>",
3483 " Specify the maximum interface speed for the modem.",
3485 "SET MODEM NAME <text>",
3486 " Descriptive name for a USER-DEFINED modem.",
3488 "SET MODEM SPEAKER {ON, OFF}",
3489 " Turns the modem's speaker on or off during dialing.",
3491 "SET MODEM SPEED-MATCHING {ON, OFF}",
3492 " ON means that C-Kermit changes its serial interface speed to agree with",
3493 " the speed reported by the modem's CONNECT message, if any. OFF means",
3494 " Kermit should not change its interface speed.",
3496 "SET MODEM VOLUME {LOW, MEDIUM, HIGH}",
3497 " Selects the desired modem speaker volume for when the speaker is ON.",
3499 "SET MODEM COMMAND commands are used to override built-in modem commands for",
3500 "each modem type, or to fill in commands for the USER-DEFINED modem type.",
3501 "Omitting the optional [ text ] restores the built-in modem-specific command,",
3504 "SET MODEM COMMAND AUTOANSWER {ON, OFF} [ text ]",
3505 " Modem commands to turn autoanswer on and off.",
3507 "SET MODEM COMMAND COMPRESSION {ON, OFF} [ text ]",
3508 " Modem commands to turn data compression on and off.",
3510 "SET MODEM COMMAND ERROR-CORRECTION {ON, OFF} [ text ]",
3511 " Modem commands to turn error correction on and off.",
3513 "SET MODEM COMMAND HANGUP [ text ]",
3514 " Command that tells the modem to hang up the connection.",
3516 "SET MODEM COMMAND IGNORE-DIALTONE [ text ]",
3517 " Command that tells the modem not to wait for dialtone before dialing.",
3519 "SET MODEM COMMAND INIT-STRING [ text ]",
3520 " The 'text' is a replacement for C-Kermit's built-in initialization command",
3523 "SET MODEM COMMAND PREDIAL-INIT [ text ]",
3524 " A second INIT-STRING that is to be sent to the modem just prior to \
3527 "SET MODEM COMMAND HARDWARE-FLOW [ text ]",
3528 " Modem command to enable hardware flow control (RTS/CTS) in the modem.",
3530 "SET MODEM COMMAND SOFTWARE-FLOW [ text ]",
3531 " Modem command to enable local software flow control (Xon/Xoff) in modem.",
3533 "SET MODEM COMMAND SPEAKER { ON, OFF } [ text ]",
3534 " Modem command to turn the modem's speaker on or off.",
3536 "SET MODEM COMMAND NO-FLOW-CONTROL [ text ]",
3537 " Modem command to disable local flow control in the modem.",
3539 "SET MODEM COMMAND PULSE [ text ]",
3540 " Modem command to select pulse dialing.",
3542 "SET MODEM COMMAND TONE [ text ]",
3543 " Modem command to select tone dialing.",
3545 "SET MODEM COMMAND VOLUME { LOW, MEDIUM, HIGH } [ text ]",
3546 " Modem command to set the modem's speaker volume.",
3549 static char *hmxydial[] = {
3550 "The SET DIAL command establishes or changes all parameters related to",
3551 "dialing the telephone. Also see HELP DIAL and HELP SET MODEM. Use SHOW",
3552 "DIAL to display all of the SET DIAL values.",
3554 "SET DIAL COUNTRY-CODE <number>",
3555 " Tells Kermit the telephonic country-code of the country you are dialing",
3556 " from, so it can tell whether a portable-format phone number from your",
3557 " dialing directory will result in a national or an international call.",
3558 " Examples: 1 for USA, Canada, Puerto Rico, etc; 7 for Russia, 39 for Italy,",
3559 " 351 for Portugal, 47 for Norway, 44 for the UK, 972 for Israel, 81 for",
3562 " If you have not already set your DIAL INTL-PREFIX and LD-PREFIX, then this",
3563 " command sets default values for them: 011 and 1, respectively, for country",
3564 " code 1; 00 and 0, respectively, for all other country codes. If these are",
3565 " not your true international and long-distance dialing prefixes, then you",
3566 " should follow this command by DIAL INTL-PREFIX and LD-PREFIX to let Kermit",
3567 " know what they really are.",
3569 "SET DIAL AREA-CODE [ <number> ]",
3570 " Tells Kermit the area or city code that you are dialing from, so it can",
3571 " tell whether a portable-format phone number from the dialing directory is",
3572 " local or long distance. Be careful not to include your long-distance",
3573 " dialing prefix as part of your area code; for example, the area code for",
3574 " central London is 171, not 0171.",
3576 "SET DIAL CONFIRMATION {ON, OFF}",
3577 " Kermit does various transformations on a telephone number retrieved from",
3578 " the dialing directory prior to dialing (use LOOKUP <name> to see them).",
3579 " In case the result might be wrong, you can use SET DIAL CONFIRM ON to have",
3580 " Kermit ask you if it is OK to dial the number, and if not, to let you type",
3581 " in a replacement.",
3583 "SET DIAL CONNECT { AUTO, ON, OFF }",
3584 " Whether to CONNECT (enter terminal mode) automatically after successfully",
3585 " dialing. ON means to do this; OFF means not to. AUTO (the default) means",
3586 " do it if the DIAL command was given interactively, but don't do it if the",
3587 " DIAL command was issued from a macro or command file. If you specify ON",
3588 " or AUTO, you may follow this by one of the keywords VERBOSE or QUIET, to",
3589 " indicate whether the verbose 4-line 'Connecting...' message is to be",
3590 " displayed if DIAL succeeds and Kermit goes into CONNECT mode.",
3592 "SET DIAL CONVERT-DIRECTORY {ASK, ON, OFF}",
3593 " The format of Kermit's dialing directory changed in version 5A(192). This",
3594 " command tells Kermit what to do when it encounters an old-style directory:",
3595 " ASK you whether to convert it, or convert it automatically (ON), or leave",
3596 " it alone (OFF). Old-style directories can still be used without",
3597 " conversion, but the parity and speed fields are ignored.",
3599 "SET DIAL DIRECTORY [ filename [ filename [ filename [ ... ] ] ] ]",
3600 " The name(s) of your dialing directory file(s). If you do not supply any",
3601 " filenames, the dialing directory feature is disabled and all numbers are",
3602 " dialed literally as given in the DIAL command. If you supply more than",
3603 " one directory, all of them are searched.",
3605 "SET DIAL SORT {ON, OFF}",
3606 " When multiple entries are obtained from your dialing directory, they are",
3607 " sorted in \"cheapest-first\" order. If this does not produce the desired",
3608 " effect, SET DIAL SORT OFF to disable sorting, and the numbers will be",
3609 " dialed in the order in which they were found.",
3611 "SET DIAL DISPLAY {ON, OFF}",
3612 " Whether to display dialing progress on the screen; default is OFF.",
3614 "SET DIAL HANGUP {ON, OFF}",
3615 " Whether to hang up the phone prior to dialing; default is ON.",
3617 "SET DIAL IGNORE-DIALTONE {ON, OFF}",
3618 " Whether to ignore dialtone when dialing; default is OFF.",
3621 "SET DIAL MACRO [ name ]",
3622 " Specify the name of a macro to execute on every phone number dialed, just",
3623 " prior to dialing it, in order to perform any last-minute alterations.",
3626 "SET DIAL METHOD {AUTO, DEFAULT, TONE, PULSE}",
3627 " Whether to use the modem's DEFAULT dialing method, or to force TONE or",
3628 " PULSE dialing. AUTO (the default) means to choose tone or pulse dialing",
3629 " based on the country code. (Also see SET DIAL TONE-COUNTRIES and SET DIAL",
3630 " PULSE-COUNTRIES.)",
3632 "SET DIAL PACING number",
3633 " How many milliseconds to pause between sending each character to the modem",
3634 " dialer. The default is -1, meaning to use the number from the built-in",
3637 "SET DIAL PULSE-COUNTRIES [ cc [ cc [ ... ] ] ]",
3638 " Sets the list of countries in which pulse dialing is required. Each cc",
3639 " is a country code.",
3641 "SET DIAL TEST { ON, OFF }",
3642 " OFF for normal dialing. Set to ON to test dialing procedures without",
3643 " actually dialing.",
3645 "SET DIAL TONE-COUNTRIES [ cc [ cc [ ... ] ] ]",
3646 " Sets the list of countries in which tone dialing is available. Each cc",
3647 " is a country code.",
3649 "SET DIAL TIMEOUT number",
3650 " How many seconds to wait for a dialed call to complete. Use this command",
3651 " to override the DIAL command's automatic timeout calculation. A value",
3652 " of 0 turns off this feature and returns to Kermit's automatic dial",
3653 " timeout calculation.",
3655 "SET DIAL RESTRICT { INTERNATIONAL, LOCAL, LONG-DISTANCE, NONE }",
3656 " Prevents placing calls of the type indicated, or greater. For example",
3657 " SET DIAL RESTRICT LONG prevents placing of long-distance and international",
3658 " calls. If this command is not given, there are no restrictions. Useful",
3659 " when dialing a list of numbers fetched from a dialing directory.",
3661 "SET DIAL RETRIES <number>",
3662 " How many times to redial each number if the dialing result is busy or no",
3663 " no answer, until the call is succesfully answered. The default is 0",
3664 " because automatic redialing is illegal in some countries.",
3666 "SET DIAL INTERVAL <number>",
3667 " How many seconds to pause between automatic redial attempts; default 10.",
3669 "The following commands apply to all phone numbers, whether given literally",
3670 "or found in the dialing directory:",
3672 "SET DIAL PREFIX [ text ]",
3673 " Establish a prefix to be applied to all phone numbers that are dialed,",
3674 " for example to disable call waiting.",
3676 "SET DIAL SUFFIX [ text ]",
3677 " Establish a suffix to be added after all phone numbers that are dialed.",
3679 "The following commands apply only to portable-format numbers obtained from",
3680 "the dialing directory; i.e. numbers that start with a \"+\" sign and",
3681 "country code, followed by area code in parentheses, followed by the phone",
3684 "SET DIAL LC-AREA-CODES [ <list> ]",
3685 " Species a list of area codes to which dialing is local, i.e. does not",
3686 " require the LD-PREFIX. Up to 32 area codes may be listed, separated by",
3687 " spaces. Any area codes in this list will be included in the final dial",
3688 " string so do not include your own area code if it should not be dialed.",
3690 "SET DIAL LC-PREFIX [ <text> ]",
3691 " Specifies a prefix to be applied to local calls made from portable dialing",
3692 " directory entries. Normally no prefix is used for local calls.",
3694 "SET DIAL LC-SUFFIX [ <text> ]",
3695 " Specifies a suffix to be applied to local calls made from portable dialing",
3696 " directory entries. Normally no suffix is used for local calls.",
3698 "SET DIAL LD-PREFIX [ <text> ]",
3699 " Your long-distance dialing prefix, to be used with portable dialing",
3700 " directory entries that result in long-distance calls.",
3702 "SET DIAL LD-SUFFIX [ <text> ]",
3703 " Long-distance dialing suffix, if any, to be used with portable dialing",
3704 " directory entries that result in long-distance calls. This would normally",
3705 " be used for appending a calling-card number to the phone number.",
3707 "SET DIAL FORCE-LONG-DISTANCE { ON, OFF }",
3708 " Whether to force long-distance dialing for calls that normally would be",
3709 " local. For use (e.g.) in France.",
3711 "SET DIAL TOLL-FREE-AREA-CODE [ <number> [ <number> [ ... ] ] ]",
3712 " Tells Kermit the toll-free area code(s) in your country.",
3714 "SET DIAL TOLL-FREE-PREFIX [ <text> ]",
3715 " You toll-free dialing prefix, in case it is different from your long-",
3716 " distance dialing prefix.",
3718 "SET DIAL INTL-PREFIX <text>",
3719 " Your international dialing prefix, to be used with portable dialing",
3720 " directory entries that result in international calls.",
3722 "SET DIAL INTL-SUFFIX <text>",
3723 " International dialing suffix, if any, to be used with portable dialing",
3724 " directory entries that result in international calls.",
3726 "SET DIAL PBX-OUTSIDE-PREFIX <text>",
3727 " Use this to tell Kermit how to get an outside line when dialing from a",
3728 " Private Branch Exchange (PBX).",
3730 "SET DIAL PBX-EXCHANGE <text> [ <text> [ ... ] ]",
3731 " If PBX-OUTSIDE-PREFIX is set, then you can use this command to tell Kermit",
3732 " the leading digits of one or more local phone numbers that identify it as",
3733 " being on your PBX, so it can make an internal call by deleting those digits"
3735 " from the phone number.",
3737 "SET DIAL PBX-INTERNAL-PREFIX <text>",
3738 " If PBX-EXCHANGE is set, and Kermit determines from it that a call is",
3739 " internal, then this prefix, if any, is added to the number prior to",
3741 dialing. Use this if internal calls from your PBX require a special prefix.",
3745 static char *hmxyflo[] = { "Syntax: SET FLOW [ switch ] value",
3748 " Selects the type of flow control to use during file transfer, terminal",
3749 " connection, and script execution.",
3751 " Selects the type of flow control to use during file transfer.",
3752 #endif /* NOLOCAL */
3754 " Switches let you associate a particular kind of flow control with each",
3755 " kind of connection: /REMOTE, /MODEM, /DIRECT-SERIAL, /TCPIP, etc; type",
3756 " \"set flow ?\" for a list of available switches. Then whenever you make",
3757 " a connection, the associated flow-control is chosen automatically.",
3758 " The flow-control values are NONE, KEEP, XON/XOFF, and possibly RTS/CTS",
3759 " and some others; again, type \"set flow ?\" for a list. KEEP tells Kermit",
3760 " not to try to change the current flow-control method for the connection.",
3762 " If you omit the switch and simply supply a value, this value becomes the",
3763 " current flow control type, overriding any default value that might have",
3764 " been chosen in your most recent SET LINE, SET PORT, or SET HOST, or other",
3765 " connection-establishment command.",
3767 " Type SHOW FLOW-CONTROL to see the current defaults for each connection type"
3769 " as well as the current connection type and flow-control setting. SHOW",
3770 " COMMUNICATIONS also shows the current flow-control setting.",
3773 static char *hmxyf[] = {
3774 "Syntax: SET FILE parameter value",
3776 "Sets file-related parameters. Use SHOW FILE to view them. Also see SET",
3777 "(and SHOW) TRANSFER and PROTOCOL.",
3780 "SET FILE TYPE { TEXT, BINARY, IMAGE, LABELED }",
3783 "SET FILE TYPE { TEXT, BINARY, LABELED }",
3786 "SET FILE TYPE { TEXT, BINARY, MACBINARY }",
3788 "SET FILE TYPE { TEXT, BINARY }",
3789 #endif /* STRATUS */
3792 " How file contents are to be treated during file transfer in the absence",
3793 " of any other indication. TYPE can be TEXT for conversion of record format",
3794 " and character set, which is usually needed when transferring text files",
3795 " between unlike platforms (such as UNIX and Windows), or BINARY for no",
3796 " conversion if TRANSFER MODE is MANUAL, which is not the default. Use",
3797 " BINARY with TRANSFER MODE MANUAL for executable programs or binary data or",
3798 " whenever you wish to duplicate the original contents of the file, byte for"
3800 " byte. In most modern Kermit programs, the file sender informs the receiver"
3802 " of the file type automatically. However, when sending files from C-Kermit",
3803 " to an ancient or non-Columbia Kermit implementation, you might need to set",
3804 " the corresponding file type at the receiver as well.",
3807 " FILE TYPE settings of TEXT and BINARY have no effect when sending files,",
3808 " since VMS C-Kermit determines each file's type automatically from its",
3809 " record format: binary for fixed, text for others. For incoming files,",
3810 " these settings are effective only in the absence of a file-type indication",
3811 " from the sender.",
3813 " You may include an optional record-format after the word BINARY. This may",
3814 " be FIXED (the default) or UNDEFINED. UNDEFINED is used when you need to",
3815 " receive binary files in binary mode and have them stored with UNDEFINED",
3816 " record format, which is required by certain VMS applications.",
3818 " Two additional VMS file types are also supported: IMAGE and LABELED.",
3819 " IMAGE means raw block i/o, no interference from RMS, applies to file",
3820 " transmission only, and overrides the normal automatica file type",
3821 " determination. LABELED means to send or interpret RMS attributes",
3825 " When TRANSFER MODE is AUTOMATIC (as it is by default), various automatic",
3826 " methods (depending on the platform) are used to determine whether a file",
3827 " is transferred in text or binary mode; these methods (which might include",
3828 " content scan (see SET FILE SCAN below), filename pattern matching (SET FILE"
3830 " PATTERNS), client/server \"kindred-spirit\" recognition, or source file",
3831 " record format) supersede the FILE TYPE setting but can, themselves, be",
3832 " superseded by including a /BINARY or /TEXT switch in the SEND, GET, or",
3833 " RECEIVE command.",
3835 " When TRANSFER MODE is MANUAL, the automatic methods are skipped for sending"
3837 " files; the FILE TYPE setting is used instead, which can be superseded on",
3838 " a per-command basis with a /TEXT or /BINARY switch.",
3844 "SET FILE BYTESIZE { 7, 8 }",
3845 " Normally 8. If 7, Kermit truncates the 8th bit of all file bytes.",
3848 "SET FILE CHARACTER-SET name",
3849 " Tells the encoding of the local file, ASCII by default.",
3850 " The names ITALIAN, PORTUGUESE, NORWEGIAN, etc, refer to 7-bit ISO-646",
3851 " national character sets. LATIN1 is the 8-bit ISO 8859-1 Latin Alphabet 1",
3852 " for Western European languages.",
3853 " NEXT is the 8-bit character set of the NeXT workstation.",
3854 " The CPnnn sets are for PCs. MACINTOSH-LATIN is for the Macintosh.",
3856 " LATIN2 is ISO 8859-2 for Eastern European languages that are written with",
3857 " Roman letters. Mazovia is a PC code page used in Poland.",
3858 #endif /* NOLATIN2 */
3860 " KOI-CYRILLIC, CYRILLIC-ISO, and CP866 are 8-bit Cyrillic character sets.",
3861 " SHORT-KOI is a 7-bit ASCII coding for Cyrillic. BULGARIA-PC is a PC code",
3862 " page used in Bulgaria",
3863 #endif /* CYRILLIC */
3865 " HEBREW-ISO is ISO 8859-8 Latin/Hebrew. CP862 is the Hebrew PC code page.",
3866 " HEBREW-7 is like ASCII with the lowercase letters replaced by Hebrew.",
3869 " GREEK-ISO is ISO 8859-7 Latin/Greek. CP869 is the Greek PC code page.",
3870 " ELOT-927 is like ASCII with the lowercase letters replaced by Greek.",
3873 " JAPANESE-EUC, JIS7-KANJI, DEC-KANJI, and SHIFT-JIS-KANJI are Japanese",
3874 " Kanji character sets.",
3877 " UCS-2 is the 2-byte form of the Universal Character Set.",
3878 " UTF-8 is the serialized form of the Universal Character Set.",
3879 #endif /* UNICODE */
3880 " Type SET FILE CHAR ? for a complete list of file character sets.",
3882 "SET FILE DEFAULT 7BIT-CHARACTER-SET",
3883 " When automatically switching among different kinds of files while sending",
3884 " this tells the character set to be used for 7-bit text files.",
3886 "SET FILE DEFAULT 8BIT-CHARACTER-SET",
3887 " This tells the character set to be used for 8-bit text files when",
3888 " switching automatically among different kinds of files.",
3890 #endif /* NOCSETS */
3892 "SET FILE COLLISION option",
3893 " Tells what to do when a file arrives that has the same name as",
3894 " an existing file. The options are:",
3895 " BACKUP (default) - Rename the old file to a new, unique name and store",
3896 " the incoming file under the name it was sent with.",
3897 " OVERWRITE - Overwrite (replace) the existing file.",
3898 " APPEND - Append the incoming file to the end of the existing file.",
3899 " DISCARD - Refuse and/or discard the incoming file.",
3900 " RENAME - Give the incoming file a unique name.",
3901 " UPDATE - Accept the incoming file only if newer than the existing file.",
3904 "SET FILE DESTINATION { DISK, PRINTER, SCREEN, NOWHERE }",
3905 " DISK (default): Store incoming files on disk.",
3906 " PRINTER: Send incoming files to SET PRINTER device.",
3907 " SCREEN: Display incoming files on screen (local mode only).",
3908 " NOWHERE: Do not put incoming files anywhere (use for calibration).",
3910 "SET FILE DISPLAY option",
3911 " Selects the format of the file transfer display for local-mode file",
3912 " transfer. The choices are:",
3914 " BRIEF A line per file, showing size, mode, status, and throughput.",
3915 " SERIAL One dot is printed for every K bytes transferred.",
3916 " CRT Numbers are continuously updated on a single screen line.",
3917 " This format can be used on any video display terminal.",
3919 " FULLSCREEN A fully formatted 24x80 screen showing lots of information.",
3920 " This requires a terminal or terminal emulator.",
3921 #endif /* CK_CURSES */
3922 " NONE No file transfer display at all.",
3925 "SET FILE DOWNLOAD-DIRECTORY [ <directory-name> ]",
3926 " The directory into which all received files should be placed. By default,",
3927 " received files go into your current directory.",
3932 "SET FILE EOF { CTRL-Z, LENGTH }",
3933 " End-Of-File detection method, normally LENGTH. Applies only to text-mode",
3934 " transfers. When set to CTRL-Z, this makes the file sender treat the first",
3935 " Ctrl-Z in the input file as the end of file (EOF), and it makes the file",
3936 " receiver tack a Ctrl-Z onto the end of the output file if it does not",
3937 " already end with Ctrl-Z.",
3939 #endif /* CK_CTRLZ */
3941 "SET FILE END-OF-LINE { CR, CRLF, LF }",
3942 " Use this command to specify nonstandard line terminators for text files.",
3946 "SET FILE INCOMPLETE { AUTO, KEEP, DISCARD }",
3947 " What to do with an incompletely received file: KEEP, DISCARD, or AUTO.",
3948 " AUTO (the default) means DISCARD if transfer is in text mode, KEEP if it",
3949 " is in binary mode.",
3952 "SET FILE LABEL { ACL, BACKUP-DATE, NAME, OWNER, PATH } { ON, OFF }",
3953 " Tells which items to include (ON) or exclude (OFF) in labeled file",
3958 "SET FILE LABEL { ARCHIVE, READ-ONLY, HIDDEN, SYSTEM, EXTENDED } { ON, OFF }",
3959 " Tells which items to include (ON) or exclude (OFF) in labeled file",
3967 "SET FILE LISTSIZE number",
3968 " Changes the size of the internal wildcard expansion list. Use SHOW FILE",
3969 " to see the current size. Use this command to increase the size if you get",
3970 " a \"?Too many files\" error. Also see SET FILE STRINGSPACE.",
3972 #endif /* DYNAMIC */
3975 "SET FILE NAMES { CONVERTED, LITERAL }",
3976 " File names are normally CONVERTED to \"common form\" during transmission",
3977 " (e.g. lowercase to uppercase, extra periods changed to underscore, etc).",
3978 " LITERAL means use filenames literally (useful between like systems). Also",
3979 " see SET SEND PATHNAMES and SET RECEIVE PATHNAMES.",
3983 "SET FILE OUTPUT { { BUFFERED, UNBUFFERED } [ size ], BLOCKING, NONBLOCKING }",
3984 " Lets you control the disk output buffer for incoming files. Buffered",
3985 " blocking writes are normal. Nonblocking writes might be faster on some",
3986 " systems but might also be risky, depending on the underlying file service.",
3987 " Unbuffered writes might be useful in critical applications to ensure that",
3988 " cached disk writes are not lost in a crash, but will probably also be",
3989 " slower. The optional size parameter after BUFFERED or UNBUFFERED lets you",
3990 " change the disk output buffer size; this might make a difference in",
3996 "SET FILE PATTERNS { ON, OFF, AUTO }",
3997 " ON means to use filename pattern lists to determine whether to send a file",
3998 " in text or binary mode. OFF means to send all files in the prevailing",
3999 " mode. AUTO (the default) is like ON if the other Kermit accepts Attribute",
4000 " packets and like OFF otherwise. FILE PATTERNS are used only if FILE SCAN",
4001 " is OFF (see SET FILE SCAN).",
4003 "SET FILE BINARY-PATTERNS [ <pattern> [ <pattern> ... ] ]",
4004 " Zero or more filename patterns which, if matched, cause a file to be sent",
4005 " in binary mode when FILE PATTERNS are ON. HELP WILDCARDS for a description"
4007 " of pattern syntax. SHOW PATTERNS to see the current file pattern lists.",
4009 "SET FILE TEXT-PATTERNS [ <pattern> [ <pattern> ... ] ]",
4010 " Zero or more filename patterns which, if matched, cause a file to be sent",
4011 " in text mode when FILE PATTERNS is ON; if a file does not match a text or",
4012 " binary pattern, the prevailing SET FILE TYPE is used.",
4014 #endif /* PATTERNS */
4017 "SET FILE RECORD-LENGTH number",
4018 " Sets the record length for received files of type BINARY. Use this to",
4019 " receive VMS BACKUP savesets or other fixed-format files that do not use",
4020 " the default record length of 512.",
4024 "SET FILE SCAN { ON [ size ], OFF }",
4025 " If TRANSFER MODE is AUTOMATIC and FILE SCAN is ON (as it is by default)",
4026 " Kermit peeks at the file's contents to see if it's text or binary. Use",
4027 " SET FILE SCAN OFF to disable file peeking, while still keeping TRANSFER",
4028 " MODE automatic to allow name patterns and other methods. The optional",
4029 " size is the number of file bytes to scan, 49152 by default. -1 means to",
4030 " scan the whole file. Also see SET FILE PATTERNS.",
4035 "SET FILE STRINGSPACE number",
4036 " Changes the size (in bytes) of the internal buffer that holds lists of",
4037 " filenames such as wildcard expansion lists. Use SHOW FILE to see the",
4038 " current size. Use this command to increase the size if you get a",
4039 " \"?String space exhausted\" error. Also see SET FILE LISTSIZE.",
4041 #endif /* DYNAMIC */
4045 "SET FILE UCS BOM { ON, OFF }",
4046 " Whether to write a Byte Order Mark when creating a UCS-2 file.",
4048 "SET FILE UCS BYTE-ORDER { BIG-ENDIAN, LITTLE-ENDIAN }",
4049 " Byte order to use when creating UCS-2 files, and to use when reading UCS-2",
4050 " files that do not start with a Byte Order Mark.",
4052 #endif /* UNICODE */
4054 "SET FILE WARNING { ON, OFF }",
4055 " SET FILE WARNING is superseded by the newer command, SET FILE",
4056 " COLLISION. SET FILE WARNING ON is equivalent to SET FILE COLLISION RENAME",
4057 " and SET FILE WARNING OFF is equivalent to SET FILE COLLISION OVERWRITE.",
4061 static char *hmxyhsh[] = {
4062 "Syntax: SET HANDSHAKE { NONE, XON, LF, BELL, ESC, CODE number }",
4063 " Character to use for half duplex line turnaround handshake during file",
4064 " transfer. C-Kermit waits for this character from the other computer",
4065 " before sending its next packet. Default is NONE; you can give one of the",
4066 " other names like BELL or ESC, or use SET HANDSHAKE CODE to specify the",
4067 " numeric code value of the handshake character. Type SET HANDSH ? for a",
4068 " complete list of possibilities.",
4072 static char *hsetsrv[] = {
4073 "SET SERVER CD-MESSAGE {ON,OFF}",
4074 " Tells whether the server, after successfully executing a REMOTE CD",
4075 " command, should send the contents of the new directory's READ.ME",
4076 " (or similar) file to your screen.",
4078 "SET SERVER CD-MESSAGE FILE name",
4079 " Tells the name of the file to be displayed as a CD-MESSAGE, such as",
4080 " READ.ME (SHOW SERVER tells the current CD-MESSAGE FILE name).",
4081 " To specify more than one filename to look for, use {{name1}{name2}..}.",
4082 " Synonym: SET CD MESSAGE FILE <list>.",
4084 "SET SERVER DISPLAY {ON,OFF}",
4085 " Tells whether local-mode C-Kermit during server operation should put a",
4086 " file transfer display on the screen. Default is OFF.",
4088 "SET SERVER GET-PATH [ directory [ directory [ ... ] ] ]",
4089 " Tells the C-Kermit server where to look for files whose names it receives",
4090 " from client GET commands when the names are not fully specified pathnames.",
4091 " Default is no GET-PATH, so C-Kermit looks only in its current directory.",
4093 "SET SERVER IDLE-TIMEOUT seconds",
4094 " Idle time limit while in server mode, 0 for no limit.",
4096 " NOTE: SERVER IDLE-TIMEOUT and SERVER TIMEOUT are mutually exclusive.",
4099 "SET SERVER KEEPALIVE {ON,OFF}",
4100 " Tells whether C-Kermit should send \"keepalive\" packets while executing",
4101 " REMOTE HOST commands, which is useful in case the command takes a long",
4102 " time to produce any output and therefore might cause the operation to time",
4103 " out. ON by default; turn it OFF if it causes trouble with the client or",
4104 " slows down the server too much.",
4106 "SET SERVER LOGIN [ username [ password [ account ] ] ]",
4107 " Sets up a username and optional password which must be supplied before",
4108 " the server will respond to any commands other than REMOTE LOGIN. The",
4109 " account is ignored. If you enter SET SERVER LOGIN by itself, then login",
4110 " is no longer required. Only one SET SERVER LOGIN command can be in effect",
4111 " at a time; C-Kermit does not support multiple user/password pairs.",
4113 "SET SERVER TIMEOUT n",
4114 " Server command wait timeout interval, how often the C-Kermit server issues",
4115 " a NAK while waiting for a command packet. Specify 0 for no NAKs at all.",
4119 #endif /* NOSERVER */
4121 static char *hmhrmt[] = {
4123 "The REMOTE command sends file management instructions or other commands",
4124 "to a Kermit or FTP server. If you have a single connection, the command is",
4125 "directed to the server you are connected to; if you have multiple connections"
4127 "the command is directed according to your GET-PUT-REMOTE setting.",
4129 "The REMOTE command sends file management instructions or other commands",
4130 "to a Kermit server. There should already be a Kermit running in server",
4131 "mode on the other end of the connection.",
4133 "Type REMOTE ? to see a list of available remote commands. Type HELP REMOTE",
4134 "xxx to get further information about a particular remote command xxx.",
4136 "All REMOTE commands except LOGIN and LOGOUT have R-command shortcuts;",
4137 "for example, RDIR for REMOTE DIR, RCD for REMOTE CD, etc.",
4141 "Also see: HELP SET LOCUS, HELP FTP, HELP SET GET-PUT-REMOTE.",
4143 "Also see: HELP FTP, HELP SET GET-PUT-REMOTE.",
4147 "Also see: HELP SET LOCUS.",
4153 static char *ifhlp[] = { "Syntax: IF [NOT] condition commandlist",
4155 "If the condition is (is not) true, do the commandlist. The commandlist",
4156 "can be a single command, or a list of commands separated by commas and",
4157 "enclosed in braces. The condition can be a single condition or a group of",
4158 "conditions separated by AND (&&) or OR (||) and enclosed in parentheses.",
4159 "If parentheses are used they must be surrounded by spaces. Examples:",
4161 " IF EXIST oofa.txt <command>",
4162 " IF ( EXIST oofa.txt || = \\v(nday) 3 ) <command>",
4163 " IF ( EXIST oofa.txt || = \\v(nday) 3 ) { <command>, <command>, ... }",
4165 "The conditions are:",
4167 " SUCCESS - The previous command succeeded",
4168 " OK - Synonym for SUCCESS",
4169 " FAILURE - The previous command failed",
4170 " ERROR - Synonym for FAILURE",
4171 " FLAG - Succeeds if SET FLAG ON, fails if SET FLAG OFF",
4172 " BACKGROUND - C-Kermit is running in the background",
4174 " FOREGROUND - C-Kermit is running in the foreground",
4175 " REMOTE-ONLY - C-Kermit was started with the -R command-line option",
4177 " FOREGROUND - C-Kermit is running in the foreground",
4178 #endif /* CK_IFRO */
4179 " KERBANG - A Kerbang script is running",
4180 " ALARM - SET ALARM time has passed",
4181 " ASKTIMEOUT - The most recent ASK, ASKQ, GETC, or GETOK timed out",
4182 " EMULATION - Succeeds if executed while in CONNECT mode",
4184 " TAPI - Current connection is via a Microsoft TAPI device",
4187 " MS-KERMIT - Program is MS-DOS Kermit",
4188 " C-KERMIT - Program is C-Kermit",
4189 " K-95 - Program is Kermit 95",
4190 " GUI - Program runs in a GUI window",
4192 " AVAILABLE CRYPTO - Encryption is available",
4193 " AVAILABLE KERBEROS4 - Kerberos 4 authentication is available",
4194 " AVAILABLE KERBEROS5 - Kerberos 5 authentication is available",
4195 " AVAILABLE NTLM - NTLM authentication is available",
4196 " AVAILABLE SRP - SRP authentication is available",
4197 " AVAILABLE SSL - SSL/TLS authentication is available",
4198 " MATCH string pattern - Succeeds if string matches pattern",
4200 " FLOAT number - Succeeds if floating-point number",
4201 #endif /* CKFLOAT */
4202 " COMMAND word - Succeeds if word is built-in command",
4203 " DEFINED variablename or macroname - The named variable or macro is defined",
4204 " DECLARED arrayname - The named array is declared",
4205 " NUMERIC variable or constant - The variable or constant is numeric",
4206 " EXIST filename - The named file exists",
4207 " ABSOLUTE filename - The filename is absolute, not relative",
4209 " DIRECTORY string - The string is the name of a directory",
4210 #endif /* CK_TMPDIR */
4211 " READABLE filename - Succeeds if the file is readable",
4212 " WRITEABLE filename - Succeeds if the file is writeable",
4214 " NEWER file1 file2 - The 1st file is newer than the 2nd one",
4216 " OPEN { READ-FILE,SESSION-LOG,...} - The given file or log is open",
4218 " OPEN CONNECTION - A connection is open",
4219 #endif /* NOLOCAL */
4220 " KBHIT - A key has been pressed",
4222 " VERSION - equivalent to \"if >= \\v(version) ...\"",
4223 " COUNT - subtract one from COUNT, execute the command if the result is",
4224 " greater than zero (see SET COUNT)",
4226 " EQUAL s1 s2 - s1 and s2 (character strings or variables) are equal",
4227 " LLT s1 s2 - s1 is lexically (alphabetically) less than s2",
4228 " LGT s1 s1 - s1 is lexically (alphabetically) greater than s2",
4230 " = n1 n2 - n1 and n2 (numbers or variables containing numbers) are equal",
4231 " < n1 n2 - n1 is arithmetically less than n2",
4232 " <= n1 n2 - n1 is arithmetically less than or equal to n2",
4233 " > n1 n2 - n1 is arithmetically greater than n2",
4234 " >= n1 n2 - n1 is arithmetically greater than or equal to n2",
4236 " (number by itself) - fails if the number is 0, succeeds otherwise",
4238 " TRUE - always succeeds",
4239 " FALSE - always fails",
4241 "The IF command may be followed on the next line by an ELSE command. Example:",
4243 " IF < \\%x 10 ECHO It's less",
4244 " ELSE echo It's not less",
4246 "It can also include an ELSE part on the same line if braces are used:",
4248 " IF < \\%x 10 { ECHO It's less } ELSE { ECHO It's not less }",
4250 "Also see HELP WILDCARD (for IF MATCH pattern syntax).",
4253 static char *hmxxeval[] = { "Syntax: EVALUATE variable expression",
4254 " Evaluates the expression and assigns its value to the given variable.",
4255 " The expression can contain numbers and/or numeric-valued variables or",
4256 " functions, combined with mathematical operators and parentheses in",
4257 " traditional notation. Operators include +-/*(), etc. Example:",
4258 " EVALUATE \\%n (1+1) * (\\%a / 3).",
4260 " NOTE: Prior to C-Kermit 7.0, the syntax was \"EVALUATE expression\"",
4261 " (no variable), and the result was printed. Use SET EVAL { OLD, NEW }",
4262 " to choose the old or new behavior, which is NEW by default.",
4264 "Alse see: HELP FUNCTION EVAL.",
4268 static char *hmxxexit[] = {
4269 "Syntax: EXIT (or QUIT) [ number [ text ] ]",
4270 " Exits from the Kermit program, closing all open files and devices.",
4271 " If a number is given it becomes Kermit's exit status code. If text is",
4272 " included, it is printed. Also see SET EXIT.",
4276 static char *ifxhlp[] = { "\
4277 Syntax: XIF condition { commandlist } [ ELSE { commandlist } ]",
4278 " Obsolete. Same as IF (see HELP IF).",
4281 static char *forhlp[] = { "\
4282 Syntax: FOR variablename initial-value final-value increment { commandlist }",
4283 " FOR loop. Execute the comma-separated commands in the commandlist the",
4284 " number of times given by the initial value, final value and increment.",
4285 " Example: FOR \\%i 10 1 -1 { pause 1, echo \\%i }", "" };
4287 static char *whihlp[] = { "\
4288 Syntax: WHILE condition { commandlist }",
4289 " WHILE loop. Execute the comma-separated commands in the bracketed",
4290 " commandlist while the condition is true. Conditions are the same as for",
4294 static char *swihlp[] = {
4295 "Syntax: SWITCH <variable> { case-list }",
4296 " Selects from a group of commands based on the value of a variable.",
4297 " The case-list is a series of lines like these:",
4299 " :x, command, command, ..., break",
4301 " where \"x\" is a possible value for the variable. At the end of the",
4302 " case-list, you can put a \"default\" label to catch when the variable does",
4303 " not match any of the labels:",
4305 " :default, command, command, ...",
4307 "The case label \"x\" can be a character, a string, a variable, a function",
4308 "invocation, a pattern, or any combination of these. See HELP WILDCARDS",
4309 "for information about patterns.",
4312 static char *openhlp[] = {
4313 "Syntax: OPEN mode filename",
4314 " For use with READ and WRITE commands. Open the local file in the",
4315 " specified mode: READ, WRITE, or APPEND. !READ and !WRITE mean to read",
4316 " from or write to a system command rather than a file. Examples:",
4318 " OPEN READ oofa.txt",
4319 " OPEN !READ sort foo.bar",
4322 static char *hxxask[] = {
4323 "Syntax: ASK [ switches ] variablename [ prompt ]",
4324 "Example: ASK \\%n { What is your name\\? }",
4325 " Issues the prompt and defines the variable to be whatever is typed in",
4326 " response, up to the terminating carriage return. Use braces to preserve",
4327 " leading and/or trailing spaces in the prompt.",
4329 "Syntax: ASKQ [ switches ] variablename [ prompt ]",
4330 "Example: ASKQ \\%p { Password:}",
4331 " Like ASK except the response does not echo on the screen.",
4335 " Text to supply if the user enters a blank response or the /TIMEOUT",
4336 " limit expired with no response.",
4340 " The prompt and response dialog takes place in a text-mode popup.",
4341 " K95 only; in C-Kermit this switch is ignored.",
4345 " The prompt and response dialog takes place in a GUI popup.",
4346 " K95 GUI version only; in C-Kermit and the K95 console version,",
4347 " this switch is ignored.",
4352 " If the response is not entered within the given number of seconds, the",
4353 " command fails. This is equivalent to setting ASK-TIMER to a positive",
4354 " number, except it applies only to this command. Also see SET ASK-TIMER.",
4355 " NOTE: If a /DEFAULT: value was also given, it is supplied automatically",
4356 " upon timeout and the command does NOT fail.",
4360 " Suppresses \"?Timed out\" message when /TIMEOUT is given and user doesn't",
4361 " respond within the time limit.",
4363 static char *hxxgetc[] = {
4364 "Syntax: GETC variablename [ prompt ]",
4365 "Example: GETC \\%c { Type any character to continue...}",
4366 " Issues the prompt and sets the variable to the first character you type.",
4367 " Use braces to preserve leading and/or trailing spaces in the prompt.",
4369 "Also see SET ASK-TIMER.",
4372 static char *hmxytimer[] = {
4373 "Syntax: SET ASK-TIMER number",
4374 " For use with ASK, ASKQ, GETOK, and GETC. If ASK-TIMER is set to a number",
4375 " greater than 0, these commands will time out after the given number of",
4376 " seconds with no response. This command is \"sticky\", so to revert to",
4378 untimed ASKs after a timed one, use SET ASK-TIMER 0. Also see IF ASKTIMEOUT.",
4381 static char *hxxdot[] = {
4382 "Syntax: .<variable-name> <assignment-operator> <value>",
4383 " Assigns the value to the variable in the manner indicated by the",
4384 " assignment operator:",
4385 " = Copies without evaluation (like DEFINE).",
4386 " := Copies with evaluation (like ASSIGN).",
4387 " ::= Copies with arithmetic evaluation (like EVALUATE).",
4390 static char *hxxdef[] = {
4391 "Syntax: DEFINE name [ definition ]",
4392 " Defines a macro or variable. Its value is the definition, taken",
4393 " literally. No expansion or evaluation of the definition is done. Thus",
4394 " if the definition includes any variable or function references, their",
4395 " names are included, rather than their values (compare with ASSIGN). If",
4396 " the definition is omitted, then the named variable or macro is undefined.",
4398 "A typical macro definition looks like this:",
4400 " DEFINE name command, command, command, ...",
4404 " DEFINE vax set parity even, set duplex full, set flow xon/xoff",
4406 "which defines a Kermit command macro called 'vax'. The definition is a",
4407 "comma-separated list of Kermit commands. Use the DO command to execute",
4408 "the macro, or just type its name, followed optionally by arguments.",
4410 "The definition of a variable can be anything at all, for example:",
4412 " DEFINE \\%a Monday",
4415 "These variables can be used almost anywhere, for example:",
4417 " ECHO Today is \\%a",
4418 " SET BLOCK-CHECK \\%b",
4421 static char *hxxass[] = {
4422 "Syntax: ASSIGN variablename string.",
4423 "Example: ASSIGN \\%a My name is \\%b.",
4424 " Assigns the current value of the string to the variable (or macro).",
4425 " The definition string is fully evaluated before it is assigned, so that",
4426 " the values of any variables that are contained are used, rather than their",
4427 " names. Compare with DEFINE. To illustrate the difference, try this:",
4429 " DEFINE \\%a hello",
4430 " DEFINE \\%x \\%a",
4431 " ASSIGN \\%y \\%a",
4432 " DEFINE \\%a goodbye",
4435 " This prints 'goodbye hello'.", "" };
4437 static char *hxxdec[] = {
4438 "Syntax: DECREMENT variablename [ number ]",
4439 " Decrement (subtract one from) the value of a variable if the current value",
4440 " is numeric. If the number argument is given, subtract that number",
4443 "Examples: DECR \\%a, DECR \\%a 7, DECR \\%a \\%n", "" };
4445 static char *hxxinc[] = {
4446 "Syntax: INCREMENT variablename [ number ]",
4447 " Increment (add one to) the value of a variable if the current value is",
4448 " numeric. If the number argument is given, add that number instead.",
4450 "Examples: INCR \\%a, INCR \\%a 7, INCR \\%a \\%n", "" };
4455 static char *hxxpad[] = {
4456 "Syntax: PAD command",
4457 "X.25 PAD commands:",
4459 " PAD CLEAR - Clear the virtual call",
4460 " PAD STATUS - Return the status of virtual call",
4461 " PAD RESET - Send a reset packet",
4462 " PAD INTERRUPT - Send an interrupt packet",
4466 static char *hxyx25[] = {
4467 "Syntax: SET X.25 option { ON [ data ], OFF }",
4469 "X.25 call options:",
4470 " CLOSED-USER-GROUP { ON index, OFF }",
4471 " Enable or disable closed user group call, where index is the group",
4473 " REVERSE-CHARGE { ON, OFF }",
4474 " Tell whether you want to reverse the charges for the call.",
4475 " CALL-USER-DATA { ON string, OFF }",
4476 " Specify call user-data for the X.25 call.",
4480 static char *hxyprtr[] = {
4482 "Syntax: SET PRINTER [ switches ] [ name ]",
4484 " Specifies the printer to be used for transparent-print, autoprint, and",
4485 " screen-dump material during terminal emulation, as well as for the PRINT",
4486 " command, plus various options governing print behavior.",
4488 "Switches for specifying the printer by type:",
4491 " Include this switch to specify that all printer actions should simply be",
4492 " skipped. Use this, for example, if you have no printer.",
4494 "/DOS-DEVICE[:name]",
4495 " Include this to declare a DOS printer and to specify its name, such as",
4499 "/WINDOWS-QUEUE[:[queue-name]]",
4500 " Include this to declare a Windows printer and specify its queue name.",
4501 " Type question mark (?) after the colon (:) to see a list of known queue",
4502 " names. If the colon is absent, the switch indicates the currently",
4503 " selected printer is a Windows Print Queue. If the colon is provided",
4504 " and the name is absent, the Windows Print Queue chosen as the Default",
4505 " Printer is selected.",
4509 " Specifies that all printer material is to be appended to the named file,",
4510 " rather than being sent to a printer. If the file does not exist, it is",
4511 " created the first time any material is to be printed.",
4514 " Specifies that all printer material is to be sent as standard input to",
4515 " the program or command whose name is given. Example:",
4517 " SET PRINTER /PIPE:{textps > lpt1}",
4519 "If you give a printer name without specifying any of these switches, then it",
4520 "is assumed to be a DOS printer device or filename unless the name given",
4521 "(after removing enclosing braces, if any) starts with \"|\", \
4523 "is a pipe. Examples:",
4525 " SET PRINTER LPT1 <-- DOS device",
4526 " SET PRINTER {| textps > lpt1} <-- Pipe",
4528 "The next group of switches tells whether the printer is one-way or",
4529 "bidirectional (two-way):",
4532 " Include this to declare the printer capable only of receiving material to",
4533 " be printed, but not sending anything back. This is the normal kind of",
4534 " printer, Kermit's default kind, and the opposite of /BIDIRECTIONAL.",
4537 " Include this to declare the printer bidirectional. This is the opposite ",
4538 " of /OUTPUT-ONLY. You can also use this option with serial printers, even",
4539 " if they aren't bidirectional, in case you need to specify speed, flow",
4540 " control, or parity.",
4542 "The next group applies only to bidirectional and/or serial printers:",
4544 "/FLOW-CONTROL:{NONE,XON/XOFF,RTS/CTS,KEEP}",
4545 " Flow control to use with a serial bidirectional printer, default KEEP;",
4547 " i.e. use whatever the Windows driver for the port normally uses.",
4549 " i.e. use whatever the OS/2 driver for the port normally uses.",
4552 "/PARITY:{NONE,EVEN,ODD,SPACE,MARK}",
4553 " Parity to use with a serial printer, default NONE; i.e. use 8 data bits",
4554 " and no parity. If you omit the colon and the keyword, NONE is selected.",
4557 " Interface speed, in bits per second, to use with a serial printer, such as",
4558 " 2400, 9600, 19200, etc. Type SET PRINTER /SPEED:? for a list of possible",
4561 "The next group deals with print jobs -- how to identify them, how to start",
4562 "them, how to terminate them:",
4564 "/TIMEOUT[:number]",
4565 " Used with host-directed transparent or auto printing, this is the number",
4566 " of seconds to wait after the host closes the printer before terminating",
4567 " the print job if the printer is not opened again during the specified",
4570 "/JOB-HEADER-FILE[:filename]",
4571 " The name of a file to be sent to the printer at the beginning of each",
4572 " print job, as a burst page, or to configure the printer. Normally no file",
4575 "/END-OF-JOB-STRING[:string]",
4576 " String of characters to be sent to the printer at the end of the print",
4577 " job, usually used to force the last or only page out of the printer. When",
4578 " such a string is needed, it usually consists of a single formfeed: \"set",
4579 " printer /end-of-job:{\\12}\". No end-of-job string is sent unless you",
4580 " specify one with this option. If the string contains any spaces or",
4581 " control characters (even in backslash notation, as above), enclose it in",
4584 "The next group is for use with printers that print only PostScript:",
4586 "/POSTSCRIPT or /PS",
4587 " Indicates that K95 should convert all text to PostScript before sending",
4588 " it to the printer. The fixed-pitch Courier-11 font is used.",
4591 " Specifies the width of the page in characters. If this switch is not",
4592 " given, 80 is used.",
4595 " Specifies the height of the page in lines. If this switch is not given",
4598 "/NOPOSTSCRIPT or /NOPS",
4599 " Indicates that K95 should not convert all text to PostScript before",
4600 " sending it to the printer.",
4602 "The final switch is for use with AutoPrint mode and Screen Dumps",
4604 "/CHARACTER-SET:<character-set>",
4605 " Specifies the character set used by the printer which may be different",
4606 " from both the character set used by the host and by the local computer.",
4607 " The default value is CP437.",
4609 "SHOW PRINTER displays your current printer settings.",
4612 "Syntax: SET PRINTER [ { |command, filename } ]",
4613 " Specifies the command (such as \"|lpr\") or filename to be used by the",
4614 " PRINT command. If a filename is given, each PRINT command appends to the",
4615 " given file. If the SET PRINTER argument contains spaces, it must be",
4616 " enclosed in braces, e.g. \"set printer {| lpr -Plaser}\". If the argument",
4617 " is omitted the default value is restored. SHOW PRINTER lists the current",
4618 " printer. See HELP PRINT for further info.",
4620 "Sorry, SET PRINTER not available yet.",
4622 #endif /* PRINTSWI */
4627 static char *hxybprtr[] = {
4628 "Syntax: SET BPRINTER [ portname speed [ parity [ flow-control ] ] ]",
4629 " (Obsolete, replaced by SET PRINTER /BIDIRECTIONAL.)",
4634 static char *hxyexit[] = {
4635 "Syntax: SET EXIT HANGUP { ON, OFF }",
4636 " When ON (which is the default), C-Kermit executes an implicit HANGUP and",
4637 " CLOSE command on the communications device or connection when it exits.",
4638 " When OFF, Kermit skips this sequence.",
4640 "Syntax: SET EXIT ON-DISCONNECT { ON, OFF }",
4641 " When ON, C-Kermit EXITs automatically when a network connection",
4642 " is terminated either by the host or by issuing a HANGUP command.",
4644 "Syntax: SET EXIT STATUS number",
4646 " Set C-Kermit's program return code to the given number.",
4648 " Set C-Kermit's program return code to the given number, which can be a",
4649 " constant, variable, function result, or arithmetic expression.",
4652 "Syntax: SET EXIT WARNING { ON, OFF, ALWAYS }",
4653 " When EXIT WARNING is ON, issue a warning message and ask for confirmation",
4654 " before EXITing if a connection to another computer might still be open.",
4655 " When EXIT WARNING is ALWAYS, confirmation is always requested. When OFF",
4656 " it is never requested. The default is ON.",
4660 static char *hxxpau[] = {
4661 "Syntax: PAUSE [ { number-of-seconds, hh:mm:ss } ]",
4662 "Example: PAUSE 3 or PAUSE 14:52:30",
4663 " Do nothing for the specified number of seconds or until the given time of",
4664 " day in 24-hour hh:mm:ss notation. If the time of day is earlier than the",
4665 " current time, it is assumed to be tomorrow. If no argument given, one",
4666 " second is used. The pause can be interrupted by typing any character on",
4667 " the keyboard unless SLEEP CANCELLATION is OFF. If interrupted, PAUSE",
4668 " fails, otherwise it succeeds. Synonym: SLEEP.",
4671 static char *hxxmsl[] = {
4672 "Syntax: MSLEEP [ number ]",
4673 "Example: MSLEEP 500",
4674 " Do nothing for the specified number of milliseconds; if no number given,",
4675 " 100 milliseconds.","" };
4680 static char *hxxshe[] = {
4681 "Syntax: !, @, RUN, PUSH, or SPAWN, optionally followed by a command.",
4682 " Gives the command to the local operating system's command processor, and",
4683 " displays the results on the screen. If the command is omitted, enters the",
4684 " system's command line interpreter or shell; exit from it (the command for",
4685 " this is usually EXIT or QUIT or LOGOUT) to return to Kermit.",
4691 static char *hxxxmit[] = {
4692 "Syntax: TRANSMIT [ switches ] filename",
4693 " Sends the contents of a file, without any error checking or correction,",
4694 " to the computer on the other end of your SET LINE or SET HOST connection",
4695 " (or if C-Kermit is in remote mode, displays it on the screen). The",
4696 " filename is the name of a single file (no wildcards) to be sent or, if",
4697 " the /PIPE switch is included, the name of a command whose output is to be",
4700 " The file is sent according to your current FILE TYPE setting (BINARY or",
4701 " TEXT), which you can override with a /BINARY or /TEXT switch without",
4702 " changing the global setting. In text mode, it is sent a line at a time,",
4703 " with carriage return at the end of each line (as if you were typing it at",
4704 " your keyboard), and C-Kermit waits for a linefeed to echo before sending",
4705 " the next line; use /NOWAIT to eliminate the feedback requirement. In",
4706 " binary mode, it is sent a character at a time, with no feedback required.",
4708 " Normally the transmitted material is echoed to your screen. Use SET",
4709 " TRANSMIT ECHO OFF or the /NOECHO switch to suppress echoing. Note that",
4710 " TRANSMIT /NOECHO /NOWAIT /BINARY is a special case, that more or less",
4711 " blasts the file out at full speed.",
4714 " Character sets are translated according to your current FILE and TERMINAL",
4715 " CHARACTER-SET settings when TRANSMIT is in text mode. Include /TRANSPARENT"
4717 " to disable character-set translation in text mode (/TRANSPARENT implies",
4720 #endif /* NOCSETS */
4721 " There can be no guarantee that the other computer will receive the file",
4722 " correctly and completely. Before you start the TRANSMIT command, you",
4723 " must put the other computer in data collection mode, for example by",
4724 " starting a text editor. TRANSMIT may be interrupted by Ctrl-C. Synonym:",
4725 " XMIT. See HELP SET TRANSMIT for further information.",
4730 static char *hxxxla[] = {
4731 "Syntax: TRANSLATE file1 cs1 cs2 [ file2 ]",
4732 " Translates file1 from the character set cs1 into the character set cs2",
4733 " and stores the result in file2. The character sets can be any of",
4734 " C-Kermit's file character sets. If file2 is omitted, the translation",
4735 " is displayed on the screen. An appropriate intermediate character-set",
4736 " is chosen automatically, if necessary. Synonym: XLATE. Example:",
4738 " TRANSLATE lasagna.lat latin1 italian lasagna.nrc",
4740 " Multiple files can be translated if file2 is a directory or device name,",
4741 " rather than a filename, or if file2 is omitted.",
4743 #endif /* NOCSETS */
4746 static char *hxxwai[] = {
4747 "Syntax: WAIT { number-of-seconds, hh:mm:ss } [ <what> ]",
4751 " wait 23:59:59 cd",
4753 " Waits up to the given number of seconds or the given time of day for the",
4754 " specified item or event, which can be FILE, the name(s) of one or more",
4755 " modem signals, or nothing. If nothing is specified, WAIT acts like SLEEP.",
4756 " If one or more modem signal names are given, Kermit waits for the specified"
4758 " modem signals to appear on the serial communication device.",
4759 " Sets FAILURE if the signals do not appear in the given time or interrupted",
4760 " from the keyboard during the waiting period.",
4763 " cd = Carrier Detect;",
4764 " dsr = Dataset Ready;",
4765 " cts = Clear To Send;",
4766 " ri = Ring Indicate.",
4768 "If you want Kermit to wait for a file event, then the syntax is:",
4770 " WAIT <time> FILE { CREATION, DELETION, MODIFICATION } <filename>",
4772 "where <time> is as above, and <filename> is the name of a single file.",
4773 "Kermit waits up to the given amount of time for the specified event to occur",
4774 "with the specified file, succeeds if it does, fails if it doesn't.",
4778 static char *hxxwri[] = {
4779 "Syntax: WRITE name text",
4780 " Writes the given text to the named log or file. The text text may include",
4781 " backslash codes, and is not terminated by a newline unless you include the",
4782 " appropriate code. The name parameter can be any of the following:",
4785 " ERROR (standard error)",
4787 " FILE (the OPEN WRITE, OPEN !WRITE, or OPEN APPEND file, see HELP OPEN)",
4790 " SCREEN (compare with ECHO)",
4793 #endif /* NOLOCAL */
4794 " TRANSACTION-LOG", "" };
4797 static char *hxxlook[] = { "Syntax: LOOKUP name",
4798 " Looks up the given name in the dialing directory or directories, if any,",
4799 " specified in the most recent SET DIAL DIRECTORY command. Each matching",
4800 " entry is shown, along with any transformations that would be applied to",
4801 " portable-format entries based on your locale. HELP DIAL, HELP SET DIAL",
4802 " for further info.",
4806 static char *hxxansw[] = { "Syntax: ANSWER [ <seconds> ]",
4808 " Waits for a modem call to come in. Prior SET MODEM TYPE and SET PORT",
4810 " Waits for a modem call to come in. Prior SET MODEM TYPE and SET LINE",
4812 " required. If <seconds> is 0 or not specified, Kermit waits forever or",
4813 " until interrupted, otherwise Kermit waits the given number of seconds.",
4814 " The ANSWER command puts the modem in autoanswer mode. Subsequent DIAL",
4815 " commands will automatically put it (back) in originate mode. SHOW MODEM,",
4816 " HELP SET MODEM for more info.",
4820 static char *hxxdial[] = { "Syntax: DIAL phonenumber",
4821 "Example: DIAL 7654321",
4823 Dials a number using an autodial modem. First you must SET MODEM TYPE, then",
4825 " SET PORT (or in Windows only, SET PORT TAPI instead of SET MODEM TYPE and",
4826 " SET LINE), then SET SPEED. Then give the DIAL command, including the phone",
4828 " SET LINE, then SET SPEED. Then give the DIAL command, including the phone",
4830 " number, for example:",
4835 " If the modem is on a network modem server, SET HOST first, then SET MODEM",
4836 " TYPE, then DIAL.",
4837 #endif /* NETCONN */
4839 "If you give the DIAL command interactively at the Kermit prompt, and the",
4840 "call is placed successfully, Kermit automatically enters CONNECT mode.",
4841 "If the DIAL command is given from a macro or command file, Kermit remains",
4842 "in command mode after the call is placed, successfully or not. You can",
4843 "change this behavior with the SET DIAL CONNECT command.",
4845 "If the phonenumber starts with a letter, and if you have used the SET DIAL",
4846 "DIRECTORY command to specify one or more dialing-directory files, Kermit",
4847 "looks it up in the given file(s); if it is found, the name is replaced by",
4848 "the number or numbers associated with the name. If it is not found, the",
4849 "name is sent to the modem literally.",
4851 "If the phonenumber starts with an equals sign (\"=\"), this forces the part",
4852 "after the = to be sent literally to the modem, even if it starts with a",
4853 "letter, without any directory lookup.",
4855 "You can also give a list of phone numbers enclosed in braces, e.g:",
4857 " dial {{7654321}{8765432}{+1 (212 555-1212}}",
4859 "(Each number is enclosed in braces and the entire list is also enclosed in",
4860 "braces.) In this case, each number is tried until there is an answer. The",
4861 "phone numbers in this kind of list can not be names of dialing directory",
4864 "A dialing directory is a plain text file, one entry per line:",
4866 " name phonenumber ; comments",
4870 " work 9876543 ; This is a comment",
4871 " e-mail +1 (212) 555 4321 ; My electronic mailbox",
4872 " germany +49 (511) 555 1234 ; Our branch in Hanover",
4874 "If a phone number starts with +, then it must include country code and",
4875 "area code, and C-Kermit will try to handle these appropriately based on",
4876 "the current locale (HELP SET DIAL for further info); these are called",
4877 "PORTABLE entries. If it does not start with +, it is dialed literally.",
4879 "If more than one entry is found with the same name, Kermit dials all of",
4880 "them until the call is completed; if the entries are in portable format,",
4881 "Kermit dials them in cheap-to-expensive order: internal, then local, then",
4882 "long-distance, then international, based on its knowledge of your local",
4883 "country code and area code (see HELP SET DIAL).",
4885 "Specify your dialing directory file(s) with the SET DIAL DIRECTORY command.",
4888 "See also SET DIAL, SET MODEM, SET LINE, SET HOST, SET SPEED, REDIAL, and",
4891 "See also SET DIAL, SET MODEM, SET LINE, SET SPEED, PDIAL, and REDIAL.",
4892 #endif /* NETCONN */
4896 static char *hxxtapi[] = {
4897 "TAPI CONFIGURE-LINE <tapi-line>",
4898 " Displays the TAPI Configure Line Dialog box and allows you to",
4899 " alter the default configuration for the specified <tapi-line>.",
4901 "TAPI DIALING-PROPERTIES",
4902 " Displays the TAPI Dialing Properties (locations) Dialog box. The",
4903 " Dialing rules may be changed and locations created and deleted.",
4904 " When the dialog box is closed, K-95 imports the current Dialing",
4905 " Properties' Location into the Kermit DIAL command settings.",
4908 static char *hxytapi[] = {
4909 "SET TAPI LINE <tapi-line>",
4910 " Opens a TAPI device for use by Kermit.",
4912 "SET TAPI MODEM-DIALING {ON, [OFF]}",
4913 " If TAPI MODEM-DIALING is OFF when SET TAPI LINE is issued, Kermit opens",
4914 " the TAPI device directly as a \"raw port\". The device is unavailable to",
4915 " other applications and Kermit performs dialing functions using its",
4916 " built-in dialing and modem databases. If TAPI MODEM-DIALING is ON, TAPI",
4917 " handles all dialing functions and the port may be shared with other",
4918 " applications when a call in not active. When TAPI MODEM-DIALING is OFF,",
4919 " SET MODEM TYPE TAPI Kermit uses the TAPI modem commands imported from the",
4920 " Windows Registry during the previous SET TAPI LINE call.",
4922 "SET TAPI LOCATION <tapi-location>",
4923 " Specifies the TAPI location to make current for the entire system. The",
4924 " <tapi-location>'s dialing properties are imported into Kermit's SET DIAL",
4925 " command database.",
4927 "SET TAPI PHONE-NUMBER-CONVERSIONS {ON, OFF, [AUTO]}",
4928 " Controls whether the phone number conversions are performed by TAPI (ON)",
4929 " or by Kermit (OFF), or according the type of port that was selected",
4930 " (AUTO); AUTO is the default, and is equivalent to ON if the current",
4931 " LINE/PORT is a TAPI device and TAPI MODEM-DIALING is ON, OFF otherwise.",
4933 "SET TAPI MODEM-LIGHTS {[ON], OFF}",
4934 " Displays a modem lights indicator on the Windows 95 Taskbar. Does nothing",
4935 " in Windows NT 4.0.",
4937 "SET TAPI MANUAL-DIALING {ON, [OFF]}",
4938 " Displays a dialog box during dialing requesting that you manually dial the",
4939 " phone before continuing. Applies only when TAPI MODEM-DIALING is ON.",
4941 "SET TAPI WAIT-FOR-CREDIT-CARD-TONE <seconds>",
4942 " Some modems don't support the '$' (BONG) symbol during dialing, which",
4943 " means \"wait for credit card tone before continuing.\" If TAPI recognizes",
4944 " the modem as one that does not support BONG, it replaces the '$' with",
4945 " <seconds> worth of pauses. The default is 8 seconds. This command",
4946 " applies only when TAPI MODEM-DIALING is ON",
4948 "SET TAPI PRE-DIAL-TERMINAL {ON, [OFF]}",
4949 "SET TAPI POST-DIAL-TERMINAL {ON, [OFF]}",
4950 " Displays a small terminal window that may be used to communicate with the",
4951 " modem or the host prior to or immediately after dialing; applies only when",
4952 " TAPI MODEM-DIALING is ON",
4954 "SET TAPI INACTIVITY-TIMEOUT <minutes>",
4955 " Specifies the number of minutes of inactivity that may go by before TAPI",
4956 " disconnects the line. The default is 0 which means disable this function.",
4957 " Applies only when TAPI MODEM-DIALING is ON.",
4959 "SET TAPI USE-WINDOWS-CONFIGURATION {ON, [OFF]}",
4960 " Specifies whether the TAPI modem values for speed, parity, stop bits, flow",
4961 " control, etc. are used in preference to the current values specified",
4962 " within Kermit-95.",
4965 #endif /* CK_TAPI */
4970 static char *hmxxiks[] = {
4971 "Syntax: IKS [ switches ] [ host [ service ] ]",
4972 " Establishes a new connection to an Internet Kermit Service daemon.",
4973 " Equivalent to SET NETWORK TYPE TCP/IP, SET HOST host KERMIT /TELNET,",
4974 " IF SUCCESS CONNECT. If host is omitted, the previous connection (if any)",
4975 " is resumed. Depending on how Kermit has been built switches may be",
4976 " available to require a secure authentication method and bidirectional",
4977 " encryption. See HELP SET TELNET for more info.",
4979 #ifdef CK_AUTHENTICATION
4980 " /AUTH:<type> is equivalent to SET TELNET AUTH TYPE <type> and",
4981 " SET TELOPT AUTH REQUIRED with the following exceptions. If the type",
4982 " is AUTO, then SET TELOPT AUTH REQUESTED is executed and if the type",
4983 " is NONE, then SET TELOPT AUTH REFUSED is executed.",
4985 #endif /* CK_AUTHENTICATION */
4986 #ifdef CK_ENCRYPTION
4987 " /ENCRYPT:<type> is equivalent to SET TELNET ENCRYPT TYPE <type>",
4988 " and SET TELOPT ENCRYPT REQUIRED REQUIRED with the following exceptions.",
4989 " If the type is AUTO then SET TELOPT AUTH REQUESTED REQUESTED is executed",
4990 " and if the type is NONE then SET TELOPT ENCRYPT REFUSED REFUSED is",
4993 #endif /* CK_ENCRYPTION */
4994 " /USERID:[<name>]",
4995 " This switch is equivalent to SET LOGIN USERID <name> or SET TELNET",
4996 " ENVIRONMENT USER <name>. If a string is given, it sent to host during",
4997 " Telnet negotiations; if this switch is given but the string is omitted,",
4998 " no user ID is sent to the host. If this switch is not given, your",
4999 " current USERID value, \\v(userid), is sent. When a userid is sent to the",
5000 " host it is a request to login as the specified user.",
5002 #ifdef CK_AUTHENTICATION
5003 " /PASSWORD:[<string>]",
5004 " This switch is equivalent to SET LOGIN PASSWORD. If a string is given,",
5005 " it is treated as the password to be used (if required) by any Telnet",
5006 " Authentication protocol (Kerberos Ticket retrieval, Secure Remote",
5007 " Password, or X.509 certificate private key decryption.) If no password",
5008 " switch is specified a prompt is issued to request the password if one",
5009 " is required for the negotiated authentication method.",
5010 #endif /* CK_AUTHENTICATION */
5013 static char *hmxxtel[] = {
5014 "Syntax: TELNET [ switches ] [ host [ service ] ]",
5015 " Equivalent to SET NETWORK TYPE TCP/IP, SET HOST host [ service ] /TELNET,",
5016 " IF SUCCESS CONNECT. If host is omitted, the previous connection (if any)",
5017 " is resumed. Depending on how Kermit has been built switches may be",
5018 " available to require a secure authentication method and bidirectional",
5019 " encryption. See HELP SET TELNET for more info.",
5021 #ifdef CK_AUTHENTICATION
5022 " /AUTH:<type> is equivalent to SET TELNET AUTH TYPE <type> and",
5023 " SET TELOPT AUTH REQUIRED with the following exceptions. If the type",
5024 " is AUTO, then SET TELOPT AUTH REQUESTED is executed and if the type",
5025 " is NONE, then SET TELOPT AUTH REFUSED is executed.",
5027 #endif /* CK_AUTHENTICATION */
5028 #ifdef CK_ENCRYPTION
5029 " /ENCRYPT:<type> is equivalent to SET TELNET ENCRYPT TYPE <type>",
5030 " and SET TELOPT ENCRYPT REQUIRED REQUIRED with the following exceptions.",
5031 " If the type is AUTO then SET TELOPT AUTH REQUESTED REQUESTED is executed",
5032 " and if the type is NONE then SET TELOPT ENCRYPT REFUSED REFUSED is",
5035 #endif /* CK_ENCRYPTION */
5036 " /USERID:[<name>]",
5037 " This switch is equivalent to SET LOGIN USERID <name> or SET TELNET",
5038 " ENVIRONMENT USER <name>. If a string is given, it sent to host during",
5039 " Telnet negotiations; if this switch is given but the string is omitted,",
5040 " no user ID is sent to the host. If this switch is not given, your",
5041 " current USERID value, \\v(userid), is sent. When a userid is sent to the",
5042 " host it is a request to login as the specified user.",
5044 #ifdef CK_AUTHENTICATION
5045 " /PASSWORD:[<string>]",
5046 " This switch is equivalent to SET LOGIN PASSWORD. If a string is given,",
5047 " it is treated as the password to be used (if required) by any Telnet",
5048 " Authentication protocol (Kerberos Ticket retrieval, Secure Remote",
5049 " Password, or X.509 certificate private key decryption.) If no password",
5050 " switch is specified a prompt is issued to request the password if one",
5051 " is required for the negotiated authentication method.",
5052 #endif /* CK_AUTHENTICATION */
5055 static char *hxtopt[] = {
5056 "TELOPT { AO, AYT, BREAK, CANCEL, EC, EL, EOF, EOR, GA, IP, DMARK, NOP, SE,",
5057 " SUSP, SB [ option ], DO [ option ], DONT [ option ],",
5058 " WILL [ option ], WONT [option] }",
5059 " This command lets you send all the Telnet protocol commands. Note that",
5060 " certain commands do not require a response, and therefore can be used as",
5061 " nondestructive \"probes\" to see if the Telnet session is still open;",
5064 " set host xyzcorp.com",
5068 " if fail stop 1 Connection lost",
5070 " TELOPT NOP is sent twice because the failure of the connection will not",
5071 " be detected until the second send is attempted. This command is meant",
5072 " primarily as a debugging tool for the expert user.",
5078 /* D O H L P -- Give a help message */
5080 _PROTOTYP( int dohset, (int) );
5082 _PROTOTYP( int dohopts, (void) );
5085 _PROTOTYP( int dohfunc, (int) );
5086 extern struct keytab fnctab[];
5091 _PROTOTYP( int dohkverb, (int) );
5092 extern struct keytab kverbs[];
5094 #endif /* NOKVERBS */
5098 static char * hxxdcl[] = {
5099 "Syntax: ARRAY verb operands...",
5101 "Declares arrays and performs various operations on them. Arrays have",
5102 "the following syntax:",
5106 "where \"a\" is a letter and n is a number or a variable with a numeric value",
5107 "or an arithmetic expression. The value of an array element can be anything",
5108 "at all -- a number, a character, a string, a filename, etc.",
5110 "The following ARRAY verbs are available:",
5112 "[ ARRAY ] DECLARE arrayname[n] [ = initializers... ]",
5113 " Declares an array of the given size, n. The resulting array has n+1",
5114 " elements, 0 through n. Array elements can be used just like any other",
5115 " variables. Initial values can be given for elements 1, 2, ... by",
5116 " including = followed by one or more values separated by spaces. If you",
5117 " omit the size, the array is sized according to the number of initializers;",
5118 " if none are given the array is destroyed and undeclared if it already",
5119 " existed. The ARRAY keyword is optional. Synonym: [ ARRAY ] DCL.",
5121 "[ ARRAY ] UNDECLARE arrayname",
5122 " Destroys and undeclares the given array. Synonym: ARRAY DESTROY.",
5124 "ARRAY SHOW [ arrayname ]",
5125 " Displays the contents of the given array. A range specifier can be",
5126 " included to display a segment of the array, e.g. \"array show \\&a[1:24].\""
5128 " If the arrayname is omitted, all declared arrays are listed, but their",
5129 " contents is not shown. Synonym: SHOW ARRAY.",
5131 "ARRAY CLEAR arrayname",
5132 " Clears all elements of the array, i.e. sets them to empty values.",
5133 " You may include a range specifier to clear a segment of the array rather",
5134 " than the whole array, e.g. \"array clear \\%a[22:38]\"",
5136 "ARRAY SET arrayname value",
5137 " Sets all elements of the array to the given value. You may specify a",
5138 " range to set a segment of the array, e.g. \"array set \\%a[2:9] 0\"",
5140 "ARRAY RESIZE arrayname number",
5141 " Changes the size of the given array, which must already exist, to the",
5142 " number given. If the number is smaller than the current size, the extra",
5143 " elements are discarded; if it is larger, new empty elements are added.",
5145 "ARRAY COPY array1 array2",
5146 " Copys array1 to array2. If array2 has not been declared, it is created",
5147 " automatically. Range specifiers may be given on one or both arrays.",
5149 "ARRAY LINK array1 arra2",
5150 " Makes array1 a link to array2.",
5152 "[ ARRAY ] SORT [ switches ] array-name [ array2 ]",
5153 " Sorts the given array lexically according to the switches. Element 0 of",
5154 " the array is excluded from sorting by default. The ARRAY keyword is",
5155 " optional. If a second array name is given, that array is sorted according",
5156 " to the first one. Switches:",
5159 " If ON, alphabetic case matters; if OFF it is ignored. If this switch is",
5160 " omitted, the current SET CASE setting applies.",
5164 Position (1-based column number) at which comparisons begin, 1 by default.",
5167 " Specifies a numeric rather than lexical sort.",
5169 " /RANGE:low[:high]",
5170 " The range of elements, low through high, to be sorted. If this switch",
5171 " is not given, elements 1 through the dimensioned size are sorted. If",
5172 " :high is omitted, the dimensioned size is used. To include element 0 in",
5173 " a sort, use /RANGE:0 (to sort the whole array) or /RANGE:0:n (to sort",
5174 " elements 0 through n). You can use a range specifier in the array name",
5175 " instead of the /RANGE switch.",
5178 " Sort in reverse order. If this switch is not given, the array is sorted",
5179 " in ascending order.",
5181 "Various functions are available for array operations; see HELP FUNCTION for",
5182 "details. These include \\fdimension(), \\farraylook(), \\ffiles(), \
5189 static char * hmxxcpy[] = {
5190 "Syntax: COPY [ switches ] file1 file2",
5191 " Copies the source file (file1) to the destination file (file2). If file2",
5192 " is a directory, file1 can contain wildcards to denote a group of files to",
5193 " be copied to the given directory. Switches:",
5196 " Print the filenames and status while copying. Synonyms: /LOG, /VERBOSE",
5199 " Copy silently (default). Synonyms: /NOLOG, /QUIET",
5202 " Swap bytes while copying.",
5206 " Convert from Base64 encoding while copying.",
5209 " Convert to Base64 encoding while copying.",
5216 static char * hmxxren[] = {
5218 " If LOCUS is REMOTE or LOCUS is AUTO and you have an FTP connection,",
5219 " this command is equivalent to REMOTE RENAME (RREN). Otherwise:",
5222 "Syntax: RENAME [ switches ] name1 name2",
5223 " Renames the source file (name1) to the target name2. If name2 is a",
5224 " directory, name1 is allowed to contain wildcards, and the file(s) matching",
5225 " name1 are moved to directory name2, subject to rules of the underlying",
5226 " operating system regarding renaming across disk boundaries, etc. If name2",
5227 " is not a directory, name1 may not include wildcards, and the file whose",
5228 " name is name1 is renamed to name2. Switches:",
5231 " Print the filenames and status while renaming. Synonyms: /LOG, /VERBOSE",
5234 " Rename silently (default). Synonyms: /NOLOG, /QUIET",
5237 #endif /* NOFRILLS */
5241 "Command-line options are given after the program name in the system",
5242 "command that you use to start Kermit. Example:",
5244 " kermit -i -s oofa.exe",
5246 "tells Kermit to send (-s) the file oofa.exe in binary (-i) mode.",
5248 "Command-line options are case-sensitive; \"-s\" is different from \"-S\".",
5250 "In VMS, uppercase options must be enclosed in doublequotes: ",
5252 " $ kermit \"-Y\" \"-S\" -s oofa.txt ",
5255 "If any \"action options\" are included on the command line, Kermit exits",
5256 "after executing its command-line options. If -S is included, or no action",
5257 "options were given, Kermit enters its interactive command parser and",
5258 "issues its prompt.",
5260 "Command-line options are single characters preceded by dash (-). Some",
5261 "require an \"argument,\" others do not. If an argument contains spaces, it",
5262 "must be enclosed in doublequotes:",
5264 " kermit -s \"filename with spaces\"",
5267 An option that does not require an argument can be bundled with other options:"
5270 " kermit -Qis oofa.exe",
5272 "Exceptions to the rules:",
5274 " . If the first command-line option is a filename, Kermit executes commands",
5275 " from the file. Additional command-line options can follow the filename.",
5277 " . The special option \"=\" (equal sign) or \"--\" (double hyphen) means to",
5278 " treat the rest of the command line as data, rather than commands; this",
5279 " data is placed in the argument vector array, \\&@[], along with the other",
5280 " items on the command line, and also in the top-level \\%1..\\%9 variables."
5284 " . A similar option \"+\" (plus sign) means: the name of a Kermit script",
5285 " file follows. This file is to be executed, and its name assigned to \\%0",
5286 " and \\&_[0]. All subsequent command-line arguments are to be ignored by",
5287 " Kermit but made available to the script as \\%1, \\%2, ..., as well as",
5288 " in the argument-vector arrays. The initialization file is not executed",
5289 " automatically in this case.",
5291 #endif /* KERBANG */
5292 " . The -s option can accept multiple filenames, separated by spaces.",
5294 " . the -j and -J options allow an optional second argument, the TCP port",
5297 "Type \"help options all\" to list all the command-line options.",
5298 "Type \"help option x\" to see the help message for option x.",
5300 "Kermit also offers a selection of \"extended command-line\" options.",
5301 "These begin with two dashes, followed by a keyword, and then, if the option",
5302 "has arguments, a colon (:) or equal sign (=) followed by the argument.",
5303 "Unlike single-letter options, extended option keywords aren't case sensitive",
5304 "and they can be abbreviated to any length that still distinguishes them from",
5305 "other extended-option keywords. Example:",
5307 " kermit --banner:oofa.txt",
5309 "which designates the file oofa.txt to be printed upon startup, rather than",
5310 "the built-in banner (greeting) text. To obtain a list of available",
5311 "extended options, type \"help extended-options ?\". To get help about all",
5312 "extended options, type \"help extended-options\". To get help about a",
5313 "particular extended option, type \"help extended-option xxx\", where \"xxx\"",
5314 "is the option keyword.",
5318 "At present, most of the extended options apply only to the Internet Kermit",
5319 "Service Daemon (IKSD). Type \"help iksd\" for details.",
5321 #endif /* COMMENT */
5329 extern char * xopthlp[], * xarghlp[];
5330 extern struct keytab xargtab[];
5337 /* Check whether window size changed */
5338 if (ttgwsiz() > 0) {
5339 if (tt_rows > 0 && tt_cols > 0) {
5345 #endif /* CK_TTGWSIZ */
5348 "Extended argument without the \"--\" prefix",
5354 if ((x = cmcfm()) < 0)
5356 for (i = 0; i <= XA_MAX; i++) {
5358 printf("%s\n",xopthlp[i]);
5359 printf(" %s\n",xarghlp[i]);
5362 if (n > (cmd_rows - 6)) {
5373 if ((x = cmcfm()) < 0)
5375 printf("\n%s\n",xopthlp[y]);
5376 printf(" %s\n\n",xarghlp[y]);
5382 int i, n, x, y, z, all = 0, msg = 0;
5384 extern char *opthlp[], *arghlp[];
5385 extern char * xopthlp[], * xarghlp[];
5386 extern int optact[];
5387 if ((x = cmtxt("A command-line option character,\n\
5388 or the word ALL, or carriage return for an overview",
5389 "", &s, xxstring)) < 0)
5393 else if (!strcmp(s,"all") || (!strcmp(s,"ALL")))
5395 else if (*s == '-') /* Be tolerant of leading hyphen */
5397 if (!all && (int)strlen(s) > 1) {
5398 printf("?A single character, please, or carriage to list them all.\n");
5406 z = (y == 0) ? 127 : y;
5413 /* Check whether window size changed */
5414 if (ttgwsiz() > 0) {
5415 if (tt_rows > 0 && tt_cols > 0) {
5421 #endif /* CK_TTGWSIZ */
5423 for (i = 0, n = 1; msg != 0 && *cmdlhlp[i]; i++) {
5424 printf("%s\n",cmdlhlp[i]);
5425 if (++n > (cmd_rows - 3)) {
5433 printf("The following command-line options are available:\n\n");
5436 for (i = y; msg == 0 && i <= z; i++) {
5439 if (arghlp[i]) { /* Option with arg */
5440 printf(" -%c <arg>%s\n",(char)i,(optact[i]?" (action option)":""));
5442 printf(" %s\n",opthlp[i]);
5443 printf(" Argument: %s\n\n",arghlp[i]);
5445 } else { /* Option without arg */
5446 printf(" -%c %s%s\n",
5448 (optact[i]?" (action option)":"")
5450 printf(" Argument: (none)\n\n");
5454 if (n > (cmd_rows - x - 1)) {
5461 if (all) { /* Jeff, Jan 2003 */
5463 if (++n >= cmd_rows) {
5469 printf("The following extended options are available:\n");
5470 if (++n >= cmd_rows) {
5477 if (++n >= cmd_rows) {
5483 for (i = 0; i <= XA_MAX; i++) {
5485 printf("%s\n",xopthlp[i]);
5486 printf(" %s\n",xarghlp[i]);
5489 if (n > (cmd_rows - 4)) {
5504 static char * hxxfile[] = {
5505 "Syntax: FILE <subcommand> [ switches ] <channel> [ <data> ]",
5506 " Opens, closes, reads, writes, and manages local files.",
5508 "The FILE commands are:",
5510 " FILE OPEN (or FOPEN) -- Open a local file.",
5511 " FILE CLOSE (or FCLOSE) -- Close an open file.",
5512 " FILE READ (or FREAD) -- Read data from an open file.",
5513 " FILE WRITE (or FWRITE) -- Write data to an open file.",
5514 " FILE LIST (or FLIST) -- List open files.",
5515 " FILE STATUS (or FSTATUS) -- Show status of a channel.",
5516 " FILE REWIND (or FREWIND) -- Rewind an open file",
5517 " FILE COUNT (or FCOUNT) -- Count lines or bytes in an open file",
5518 " FILE SEEK (or FSEEK) -- Seek to specified spot in an open file.",
5519 " FILE FLUSH (or FFLUSH) -- Flush output buffers for an open file.",
5521 "Type HELP FILE OPEN or HELP FOPEN for details about FILE OPEN;",
5522 "type HELP FILE CLOSE or HELP FCLOSE for details about FILE CLOSE, and so on.",
5524 "The following variables are related to the FILE command:",
5526 " \\v(f_max) -- Maximum number of files that can be open at once",
5527 " \\v(f_error) -- Completion code of most recent FILE command or function",
5528 " \\v(f_count) -- Result of most recent FILE COUNT command",
5530 "The following functions are related to the FILE command:",
5532 " \\F_eof() -- Check if channel is at EOF",
5533 " \\F_pos() -- Get channel read/write position (byte number)",
5534 " \\F_line() -- Get channel read/write position (line number)",
5535 " \\F_handle() -- Get file handle",
5536 " \\F_status() -- Get channel status",
5537 " \\F_getchar() -- Read character",
5538 " \\F_getline() -- Read line",
5539 " \\F_getblock() -- Read block",
5540 " \\F_putchar() -- Write character",
5541 " \\F_putline() -- Write line",
5542 " \\F_putblock() -- Write block",
5543 " \\F_errmsg() -- Error message from most recent FILE command or function",
5545 "Type HELP <function-name> for information about each one.",
5549 static char * hxxf_op[] = {
5550 "Syntax: FILE OPEN [ switches ] <variable> <filename>",
5551 " Opens the file indicated by <filename> in the mode indicated by the",
5552 " switches, if any, or if no switches are included, in read-only mode, and",
5553 " assigns a channel number for the file to the given variable.",
5554 " Synonym: FOPEN. Switches:",
5557 " Open the file for reading.",
5560 " Open the file for writing. If /READ was not also specified, this creates",
5561 " a new file. If /READ was specifed, the existing file is preserved, but",
5562 " writing is allowed. In both cases, the read/write pointer is initially",
5563 " at the beginning of the file.",
5566 " If the file does not exist, create a new file and open it for writing.",
5567 " If the file exists, open it for writing, but with the write pointer",
5568 " positioned at the end.",
5572 " Opens the file in binary mode to inhibit end-of-line conversions.",
5575 " Opens the file in binary mode to inhibit end-of-line conversions.",
5578 " This option is ignored in UNIX.",
5580 " This option is ignored on this platform.",
5585 "Switches can be combined in an way that makes sense and is supported by the",
5586 "underlying operating system.",
5590 static char * hxxf_cl[] = {
5591 "Syntax: FILE CLOSE <channel>",
5592 " Closes the file on the given channel if it was open.",
5593 " Also see HELP FILE OPEN. Synonym: FCLOSE.",
5597 static char * hxxf_fl[] = {
5598 "Syntax: FILE FLUSH <channel>",
5599 " Flushes output buffers on the given channel if it was open, forcing",
5600 " all material previously written to be committed to disk. Synonym: FFLUSH.",
5601 " Also available as \\F_flush().",
5605 static char * hxxf_li[] = {
5606 "Syntax: FILE LIST",
5607 " Lists the channel number, name, modes, and position of each file opened",
5608 " with FILE OPEN. Synonym: FLIST.",
5612 static char * hxxf_re[] = {
5613 "Syntax: FILE READ [ switches ] <channel> [ <variable> ]",
5614 " Reads data from the file on the given channel number into the <variable>,",
5615 " if one was given; if no variable was given, the result is printed on",
5616 " the screen. The variable should be a macro name rather than a \\%x",
5617 " variable or array element if you want backslash characters in the file to",
5618 " be taken literally. Synonym: FREAD. Switches:",
5621 " Specifies that a line of text is to be read. A line is defined according",
5622 " to the underlying operating system's text-file format. For example, in",
5623 " UNIX a line is a sequence of characters up to and including a linefeed.",
5624 " The line terminator (if any) is removed before assigning the text to the",
5625 " variable. If no switches are included with the FILE READ command, /LINE",
5629 " Specifies that the given number of bytes (characters) is to be read.",
5630 " This gives a semblance of \"record i/o\" for files that do not necessarily",
5631 " contain lines. The resulting block of characters is assigned to the",
5632 " variable without any editing.",
5635 " Equivalent to /SIZE:1. If FILE READ /CHAR succeeds but the <variable> is",
5636 " empty, this indicates a NUL byte was read.",
5639 " Tells Kermit to trim trailing whitespace when used with /LINE. Ignored",
5640 " if used with /CHAR or /SIZE.",
5643 " Tells Kermit to convert tabs to spaces (assuming tabs set every 8 spaces)",
5644 " when used with /LINE. Ignored if used with /CHAR or /SIZE.",
5647 "Also available as \\F_getchar(), \\F_getline(), \\F_getblock().",
5651 static char * hxxf_rw[] = {
5652 "Syntax: FILE REWIND <channel>",
5653 " If the channel is open, moves the read/write pointer to the beginning of",
5654 " the file. Equivalent to FILE SEEK <channel> 0. Synonym: FREWIND.",
5655 " Also available as \\F_rewind().",
5659 static char * hxxf_se[] = {
5660 "Syntax: FILE SEEK [ switches ] <channel> { [{+,-}]<number>, EOF }",
5661 " Switches are /BYTE, /LINE, /RELATIVE, ABSOLUTE.",
5662 " Moves the file pointer for this file to the given position in the",
5663 " file. Subsequent FILE READs or WRITEs will take place at that position.",
5664 " If neither the /RELATIVE nor /ABSOLUTE switch is given, an unsigned",
5665 " <number> is absolute; a signed number is relative. EOF means to move to",
5666 " the end of the file. Synonym: FSEEK. Also available as \\F_seek().",
5670 static char * hxxf_st[] = {
5671 "Syntax: FILE STATUS <channel>",
5672 " If the channel is open, this command shows the name of the file, the",
5673 " switches it was opened with, and the current read/write position.",
5674 " Synonym: FSTATUS",
5678 static char * hxxf_co[] = {
5679 "Syntax: FILE COUNT [ { /BYTES, /LINES, /LIST, /NOLIST } ] <channel>",
5680 " If the channel is open, this command prints the nubmer of bytes (default)",
5681 " or lines in the file if at top level or if /LIST is included; if /NOLIST",
5682 " is given, the result is not printed. In all cases the result is assigned",
5683 " to \\v(f_count). Synonym: FCOUNT",
5687 static char * hxxf_wr[] = {
5688 "FILE WRITE [ switches ] <channel> <text>",
5689 " Writes the given text to the file on the given channel number. The <text>",
5690 " can be literal text or a variable, or any combination. If the text might",
5691 " contain leading or trailing spaces, it must be enclosed in braces if you",
5692 " want to preserve them. Synonym: FWRITE. Switches:",
5695 " Specifies that an appropriate line terminator is to be added to the",
5696 " end of the <text>. If no switches are included, /LINE is assumed.",
5699 " Specifies that the given number of bytes (characters) is to be written.",
5700 " If the given <text> is longer than the requested size, it is truncated;",
5701 " if is shorter, it is padded according /LPAD and /RPAD switches. Synonym:",
5705 " If /SIZE was given, but the <text> is shorter than the requested size,",
5706 " the text is padded on the left with sufficient copies of the character",
5707 " whose ASCII value is given to write the given length. If no value is",
5708 " specified, 32 (the code for Space) is used. The value can also be 0 to",
5709 " write the indicated number of NUL bytes. If /SIZE was not given, this",
5710 " switch is ignored.",
5713 " Like LPAD, but pads on the right.",
5716 " Specifies that the <text> is to be written as-is, with no terminator added."
5720 " Specifies that one character should be written. If the <text> is empty or",
5721 " not given, a NUL character is written; otherwise the first character of",
5722 " <text> is given.",
5725 "Also available as \\F_putchar(), \\F_putline(), \\F_putblock().",
5730 dohfile(cx) int cx; {
5731 extern struct keytab fctab[];
5734 if (cx == XXFILE) { /* FILE command was given */
5735 /* Get subcommand */
5736 if ((cx = cmkey(fctab,nfctab,"Operation","",xxstring)) < 0) {
5738 if ((x = cmcfm()) < 0)
5744 if ((x = cmcfm()) < 0)
5747 case FIL_CLS: cx = XXF_CL; break;
5748 case FIL_FLU: cx = XXF_FL; break;
5749 case FIL_LIS: cx = XXF_LI; break;
5750 case FIL_OPN: cx = XXF_OP; break;
5751 case FIL_REA: cx = XXF_RE; break;
5752 case FIL_REW: cx = XXF_RW; break;
5753 case FIL_SEE: cx = XXF_SE; break;
5754 case FIL_STA: cx = XXF_ST; break;
5755 case FIL_WRI: cx = XXF_WR; break;
5756 case FIL_COU: cx = XXF_CO; break;
5760 case XXFILE: return(hmsga(hxxfile));
5761 case XXF_CL: return(hmsga(hxxf_cl));
5762 case XXF_FL: return(hmsga(hxxf_fl));
5763 case XXF_LI: return(hmsga(hxxf_li));
5764 case XXF_OP: return(hmsga(hxxf_op));
5765 case XXF_RE: return(hmsga(hxxf_re));
5766 case XXF_RW: return(hmsga(hxxf_rw));
5767 case XXF_SE: return(hmsga(hxxf_se));
5768 case XXF_ST: return(hmsga(hxxf_st));
5769 case XXF_WR: return(hmsga(hxxf_wr));
5770 case XXF_CO: return(hmsga(hxxf_co));
5775 #endif /* CKCHANNELIO */
5781 debug(F101,"DOHELP xx","",xx);
5782 if (xx < 0) return(xx);
5785 if ((x = cmcfm()) < 0)
5787 printf("\n%s, Copyright (C) 1985, 2004,",versio);
5790 return(hmsga(tophlpi));
5793 return(hmsga(tophlp));
5795 #else /* help is available */
5798 return(dotype(helpfile,xaskmore,0,0,NULL,0,NULL,0,0,NULL,0));
5802 return(dohfile(xx));
5803 else if (xx == XXF_RE || xx == XXF_WR || xx == XXF_OP ||
5804 xx == XXF_CL || xx == XXF_SE || xx == XXF_RW ||
5805 xx == XXF_FL || xx == XXF_LI || xx == XXF_ST || xx == XXF_CO)
5806 return(dohfile(xx));
5807 #endif /* CKCHANNELIO */
5812 case XXASS: /* ASSIGN */
5813 return(hmsga(hxxass));
5815 case XXASK: /* ASK */
5816 case XXASKQ: /* ASKQ */
5817 return(hmsga(hxxask));
5820 return(hmsg("Syntax: APC text\n\
5821 Echoes the text within a VT220/320/420 Application Program Command."));
5826 return(hmsg("Describes how to get technical support."));
5827 #endif /* NOFRILLS */
5832 return(hmsg("Syntax: BEEP [ { ERROR, INFORMATION, WARNING } ]\n\
5833 Generates a bell according to the current settings. If SET BELL is set to\n\
5834 \"system-sounds\" then the appropriate System Sound will be generated.\n\
5835 Default is INFORMATION."));
5837 return(hmsg("Syntax: BEEP\n\
5838 Sends a BEL character to your terminal."));
5842 case XXBYE: /* BYE */
5843 return(hmsg(hmxxbye));
5845 case XXCHK: /* check */
5847 Syntax: CHECK name\n\
5849 to see if the named feature is included in this version of Kermit.\n\
5850 To list the features you can check, type \"check ?\"."));
5853 case XXCLE: /* clear */
5854 return(hmsga(hmxxcle));
5855 #endif /* NOFRILLS */
5857 case XXCLO: /* close */
5858 return(hmsga(hmxxclo));
5860 case XXCOM: /* comment */
5861 #ifndef STRATUS /* Can't use # for comments in Stratus VOS */
5863 Syntax: COMMENT text\n\
5864 Example: COMMENT - this is a comment.\n\
5865 Introduces a comment. Beginning of command line only. Commands may also\n\
5866 have trailing comments, introduced by ; or #."));
5869 Syntax: COMMENT text\n\
5870 Example: COMMENT - this is a comment.\n\
5871 Introduces a comment. Beginning of command line only. Commands may also\n\
5872 have trailing comments, introduced by ; (semicolon)."));
5873 #endif /* STRATUS */
5876 case XXCON: /* CONNECT */
5877 case XXCQ: /* CQ == CONNECT /QUIETLY */
5879 printf("Your escape character is Ctrl-%c (ASCII %d, %s)\r\n",
5880 ctl(escape), escape, (escape == 127 ? "DEL" : ccntab[escape]));
5882 #endif /* NOLOCAL */
5886 return(hmsga(hmxxcpy));
5892 " LINK source destination\n\
5893 creates a hard link to the file specified by source to the filename\n\
5894 specified by destination. Hard links are only supported on NTFS.\n\
5895 destination can either be a filename or a directory. source may\n\
5896 contain wildcards if destination is a directory."));
5900 case XXLREN: /* LRENAME */
5902 " LRENAME is an alias for the RENAME command forcing it to execute\n\
5903 on the local computer. Also see: RENAME, RRENAME, SET LOCUS."));
5906 return(hmsga(hmxxren));
5907 #endif /* NOFRILLS */
5909 case XXCDUP: /* CDUP */
5912 "Change working directory to the one just above the current one."));
5916 " LCD (LCWD) is an alias for the CD (CWD) command forcing it to execute\n\
5917 on the local computer. Also see: CD, CDUP, RCD, SET LOCUS."));
5919 case XXCWD: /* CD / CWD */
5920 return(hmsga(hmxxcwd));
5924 return(hmsga(hmxxkcd));
5927 case XXDCL: /* DECLARE */
5929 return(hmsga(hxxdcl));
5931 case XXDEF: /* DEFINE */
5933 if (hlptok) /* What they actually typed... */
5934 if (hlptok[0] == '.')
5935 return(hmsga(hxxdot));
5937 return(hmsga(hxxdef));
5939 case XXUNDEF: /* UNDEFINE */
5940 return(hmsg("Syntax: UNDEFINE variable-name\n\
5941 Undefines a macro or variable."));
5947 " LDELETE is an alias for the DELETE command forcing it to execute\n\
5948 on the local computer. Also see: DELETE, RDELETE, SET LOCUS."));
5950 case XXDEL: /* delete */
5951 return(hmsga(hmxxdel));
5952 #endif /* NOFRILLS */
5955 case XXDIAL: /* DIAL, etc... */
5956 return(hmsga(hxxdial));
5958 case XXPDIA: /* PDIAL */
5959 return(hmsg("Syntax: PDIAL phonenumber\n\
5960 Partially dials a phone number. Like DIAL but does not wait for carrier\n\
5961 or CONNECT message."));
5964 return(hmsg("Redial the number given in the most recent DIAL commnd."));
5966 case XXANSW: /* ANSWER */
5967 return(hmsga(hxxansw));
5969 case XXLOOK: /* LOOKUP number in directory */
5970 return(hmsga(hxxlook));
5973 case XXLDIR: /* LDIRECTORY */
5975 " LDIRIRECTORY is an alias for the DIRECTORY command forcing it to execute\n\
5976 on the local computer. Also see: DIRECTORY, SET LOCUS, RDIRECTORY."));
5978 case XXDIR: /* DIRECTORY */
5979 return(hmsga(hmxxdir));
5981 case XXLMKD: /* LMKDIR */
5983 " LMKDIR is an alias for the MKDIR command forcing it to execute\n\
5984 on the local computer. Also see: MKDIR, RMKDIR, SET LOCUS."));
5986 case XXMKDIR: /* MKDIR */
5987 return(hmsg("Creates a directory. Also see LRMDIR, RRMDIR, SET LOCUS."));
5989 case XXLRMD: /* LRMDIR */
5991 " LRMDIR is an alias for the RMDIR command forcing it to execute\n\
5992 on the local computer. Also see: RMDIR, RRMDIR, SET LOCUS."));
5994 case XXRMDIR: /* RMDIR */
5995 return(hmsg("Removes a directory. Also see LRMDIR, RRMDIR, SET LOCUS."));
5999 return(hmsg("Syntax: LS [ args ]\n\
6000 Runs \"ls\" with the given arguments."));
6002 return(hmsga(hmxxdir));
6003 #endif /* UNIXOROSK */
6008 return(hmsg("Syntax: DISABLE command\n\
6009 Security for the Kermit server. Prevents the client Kermit program from\n\
6010 executing the named REMOTE command, such as CD, DELETE, RECEIVE, etc."));
6011 #endif /* NOFRILLS */
6012 #endif /* NOSERVER */
6016 return(hmsg("Syntax: [ DO ] macroname [ arguments ]\n\
6017 Executes a macro that was defined with the DEFINE command. The word DO\n\
6018 can be omitted. Trailing argument words, if any, are automatically\n\
6019 assigned to the macro argument variables \\%1 through \\%9."));
6024 return(hmsga(hxxdec));
6027 case XXECH: /* echo */
6028 return(hmsg("Syntax: ECHO text\n\
6029 Displays the text on the screen, followed by a line terminator. The ECHO\n\
6030 text may contain backslash codes. Example: ECHO \\7Wake up!\\7. Also see\n\
6031 XECHO and WRITE SCREEN."));
6033 case XXXECH: /* xecho */
6034 return(hmsg("Syntax: XECHO text\n\
6035 Just like ECHO but does not add a line terminator to the text. See ECHO."));
6038 return(hmsg("Syntax: VOID text\n\
6039 Like ECHO but doesn't print anything; can be used to invoke functions\n\
6040 when you don't need to display or use their results."));
6045 return(hmsg("Syntax: ENABLE capability\n\
6046 For use with server mode. Allows the client Kermit program access to the\n\
6047 named capability, such as CD, DELETE, RECEIVE, etc. Opposite of DISABLE."));
6048 #endif /* NOFRILLS */
6049 #endif /* NOSERVER */
6052 case XXEND: /* end */
6053 return(hmsg("Syntax: END [ number [ message ] ]\n\
6054 Exits from the current macro or TAKE file, back to wherever invoked from.\n\
6055 Number is return code. Message, if given, is printed."));
6057 case XXEVAL: /* evaluate */
6058 return(hmsga(hmxxeval));
6062 case XXERR: /* e-packet */
6063 return(hmsg("Syntax: E-PACKET\n\
6064 Sends an Error packet to the other Kermit."));
6065 #endif /* NOFRILLS */
6067 case XXEXI: /* exit */
6069 return(hmsga(hmxxexit));
6072 return(hmsg("Syntax: FINISH\n\
6073 Tells the remote Kermit server to shut down without logging out."));
6077 return(hmsga(forhlp));
6081 return(hmsga(hmxxget));
6083 return(hmsga(hmxxmget));
6088 return(hmsg("Syntax: GETOK [ switches ] prompt\n\
6089 Prints the prompt, makes user type 'yes', 'no', or 'ok', and sets SUCCESS\n\
6090 or FAILURE accordingly. The optional switches are the same as for ASK."));
6091 #endif /* NOFRILLS */
6096 return(hmsg("Syntax: GOTO label\n\
6097 In a TAKE file or macro, go to the given label. A label is a word on the\n\
6098 left margin that starts with a colon (:). Example:\n\n\
6105 return(hmsg("Syntax: HANGUP\n\
6106 Hang up the phone or network connection."));
6110 We get confirmation here, even though we do it again in hmsga(), to prevent
6111 the Copyright message from being printed prematurely. This doesn't do any
6112 harm, because the first call to cmcfm() sets cmflgs to 1, making the second
6113 call return immediately.
6115 if ((x = cmcfm()) < 0)
6119 printf("\n%s, Copyright (C) 1985, 2004,\n\
6120 Trustees of Columbia University in the City of New York.\n\n",versio);
6121 return(dotype(helpfile,xaskmore,3,0,NULL,0,NULL,0,0,NULL,0));
6123 printf("\n%s, Copyright (C) 1985, 2004,",versio);
6124 return(hmsga(tophlp));
6129 return(hmsg("Give a brief introduction to C-Kermit."));
6131 return(hmsg("Give a brief introduction to Kermit 95."));
6136 return(hmsga(ifhlp));
6139 return(hmsga(hxxinc));
6142 return(hmsga(hxxinp));
6147 return(hmsga(hmxxminp));
6148 #endif /* CK_MINPUT */
6152 return(hmsg("Syntax: REINPUT n string\n\
6153 Looks for the string in the text that has recently been INPUT, set SUCCESS\n\
6154 or FAILURE accordingly. Timeout, n, must be specified but is ignored."));
6160 Introduces a label, like :loop, for use with GOTO in TAKE files or macros.\n\
6165 return(hmsga(hmxxlg));
6169 return(hmsga(hmxxlogi));
6174 return(hmsg("Syntax: MAIL filename address\n\
6175 Equivalent to SEND /MAIL:address filename."));
6176 #endif /* NOFRILLS */
6180 return(hmsga(hmxxmse));
6183 return(hmsga(hmxxadd));
6186 return(hmsg("MMOVE is exactly like MSEND, except each file that is\n\
6187 sent successfully is deleted after it is sent."));
6188 #endif /* NOMSEND */
6192 return(hmsga(openhlp));
6197 " Prints news of new features since publication of \"Using C-Kermit\"."));
6201 " New features are described in the online Kermit 95 manual,\n\
6202 accessible via the MANUAL command."));
6206 return(hmsga(hxxout));
6212 return(hmsga(hxxpad));
6218 return(hmsga(hxxpau));
6221 return(hmsga(hxxmsl));
6226 return(hmsg("Syntax: PING [ IP-hostname-or-number ]\n\
6227 Checks if the given IP network host is reachable. Default host is from\n\
6228 most recent SET HOST or TELNET command. Runs system PING program, if any.")
6233 return(hmsg("Syntax: FTP [ IP-hostname-or-number ]\n\
6234 Makes an FTP connection to the given IP host or, if no host specified, to\n\
6235 the current host. Uses the system's FTP program, if any."));
6241 #endif /* TCPSOCKET */
6246 return(hmsg("Syntax: PRINT file [ options ]\n\
6247 Prints the local file on a local printer with the given options. Also see\n\
6248 HELP SET PRINTER."));
6251 return(hmsg("Syntax: PRINT file [ options ]\n\
6252 Prints the local file on a local printer with the given options. Also see\n\
6253 HELP SET PRINTER."));
6255 return(hmsg("Syntax: PRINT file\n\
6256 Prints the local file on a local printer. Also see HELP SET PRINTER."));
6259 #endif /* NOFRILLS */
6263 return(hmsg("Syntax: PWD\n\
6264 Print the name of the current working directory."));
6268 return(hmsg("Syntax: READ variablename\n\
6269 Reads a line from the currently open READ or !READ file into the variable\n\
6275 return(hmsga(hmxxrc));
6278 y = cmkey(remcmd,nrmt,"Remote command","",xxstring);
6284 return(hmsg("Syntax: RETURN [ value ]\n\
6285 Return from a macro. An optional return value can be given for use with\n\
6286 \\fexecute(macro), which allows macros to be used like functions."));
6291 return(hmsga(hmxxsen));
6293 return(hmsg("MOVE is exactly like SEND, except each file that is\n\
6294 sent successfully is deleted after it is sent."));
6297 return(hmsg(hmxxrsen));
6299 return(hmsg(hmxxrget));
6301 return(hmsg(hmxxpsen));
6302 #endif /* NORESEND */
6306 return(hmsg(hmxxser));
6307 #endif /* NOSERVER */
6312 return(hmsg("Syntax: SUSPEND or Z\n\
6313 Suspends Kermit. Continue Kermit with the appropriate system command,\n\
6318 y = cmkey(prmtab,nprm,"Parameter","",xxstring);
6319 debug(F101,"HELP SET y","",y);
6325 if ((x = cmcfm()) < 0) return(x);
6326 printf("Sorry, help not available for \"%s\"\n",cmdbuf);
6329 return(hmsga(hxxshe));
6332 return(hmsg("Syntax: REDIRECT command\n\
6333 Runs the given local command with its standard input and output redirected\n\
6334 to the current SET LINE or SET HOST communications path.\n\
6335 Synonym: < (Left angle bracket)."));
6336 #endif /* CK_REDIR */
6340 return(hmsg("Syntax: REXX text\n\
6341 The text is a Rexx command to be executed. The \\v(rexx) variable is set\n\
6342 to the Rexx command's return value.\n\
6343 To execute a rexx program file, use: REXX call <filename>\n\
6344 Rexx programs may call Kermit functions by placing the Kermit command\n\
6345 in single quotes. For instance: 'set parity none'."));
6346 #endif /* CK_REXX */
6352 Display current values of various items (SET parameters, variables, etc).\n\
6353 Type SHOW ? for a list of categories."));
6359 Display disk usage in current device, directory,\n\
6360 or return space for a specified device, directory."));
6362 return(hmsg("Syntax: SPACE\n\
6363 Display disk usage in current device and/or directory"));
6367 return(hmsg("Syntax: STATISTICS [/BRIEF]\n\
6368 Display statistics about most recent file transfer"));
6372 return(hmsg("Syntax: STOP [ number [ message ] ]\n\
6373 Stop executing the current macro or TAKE file and return immediately to\n\
6374 the Kermit prompt. Number is a return code. Message printed if given."));
6378 return(hmsga(hmxxtak));
6383 return(hmsga(hmxxiks));
6386 return(hmsga(hmxxtel));
6389 return(hmsga(hxtopt));
6394 return(hmsg("Syntax: RLOGIN [ switches ] [ host [ username ] ]\n\
6395 Equivalent to SET NETWORK TYPE TCP/IP, SET HOST host [ service ] /RLOGIN,\n\
6396 IF SUCCESS CONNECT. If host is omitted, the previous connection (if any)\n\
6397 is resumed. Depending on how Kermit has been built switches may be\n\
6398 available to require Kerberos authentication and DES encryption."));
6399 #endif /* RLOGCODE */
6400 #endif /* TCPSOCKET */
6404 return(hmsga(hxxxmit));
6409 return(hmsga(hmxxtyp));
6411 return(hmsg("Syntax: MORE [ switches ] filename\n\
6412 Equivalent to TYPE /PAGE filename; see HELP TYPE."));
6414 return(hmsg("Syntax: MORE [ switches ] filename\n\
6415 Equivalent to TYPE /NOPAGE filename; see HELP TYPE."));
6417 return(hmsg("Syntax: HEAD [ switches ] filename\n\
6418 Equivalent to TYPE /HEAD filename; see HELP TYPE."));
6420 return(hmsg("Syntax: TAIL [ switches ] filename\n\
6421 Equivalent to TYPE /TAIL filename; see HELP TYPE."));
6422 #endif /* NOFRILLS */
6426 return(hmsga(whihlp));
6429 return(hmsga(swihlp));
6434 return(hmsga(hxxxla));
6435 #endif /* NOCSETS */
6438 return(hmsg("Syntax: VERSION\nDisplays the program version number."));
6442 return(hmsga(hxxwai));
6447 return(hmsg("Syntax: WHO [ user ]\nDisplays info about the user."));
6450 return(hmsga(hxxwri));
6454 "WRITE-LINE (WRITELN) is just like WRITE, but includes a line terminator\n\
6455 at the end of text. See WRITE."));
6456 #endif /* NOFRILLS */
6460 return(hmsga(ifxhlp));
6462 case XXGETC: /* GETC */
6463 return(hmsga(hxxgetc));
6465 case XXFWD: /* FORWARD */
6467 "Like GOTO, but searches only forward for the label. See GOTO."));
6469 case XXLOCAL: /* LOCAL */
6471 "Declares a variable to be local to the current macro or command file."));
6476 "View the terminal emulation screen even when there is no connection."));
6479 return(hmsg("Synonym for SET FILE TYPE TEXT."));
6482 return(hmsg("Synonym for SET FILE TYPE BINARY."));
6485 return(hmsga(hmxxdate));
6489 "Just like GET but asks the server to delete each file that has been\n\
6490 sent successfully."));
6494 "Equivalent to SET PARITY NONE, SET COMMAND BYTE 8, SET TERMINAL BYTE 8."));
6497 return(hmsga(hmxxsave));
6502 return(hmsg("Syntax: EDIT [ <file> ]\n\
6503 Starts your preferred editor on the given file, or if none given, the most\n\
6504 recently edited file, if any. Also see SET EDITOR."));
6506 #endif /* NOFRILLS */
6510 return(hmsg("Syntax: BROWSE [ <url> ]\n\
6511 Starts your preferred Web browser on the given URL, or if none given, the\n\
6512 most recently visited URL, if any. Also see SET BROWSER."));
6513 #endif /* BROWSER */
6517 return(hmsga(hxxtapi));
6518 #endif /* CK_TAPI */
6522 return(hmsg("Syntax: CSEND [ switches ] <command> [ <as-name> ]\n\
6523 Sends from the given <command> rather than from a file. Equivalent to\n\
6524 SEND /COMMAND; see HELP SEND for details."));
6527 return(hmsg("Syntax: CRECEIVE [ switches ] <command>\n\
6528 Receives to the given <command> rather than to a file. Equivalent to\n\
6529 RECEIVE /COMMAND; see HELP RECEIVE for details."));
6532 return(hmsg("Syntax: CGET <remote-file-or-command> <local-command>\n\
6533 Equivalent to GET /COMMAND; see HELP GET for details."));
6534 #endif /* PIPESEND */
6539 Tricky parsing. We want to let them type the function name in any format
6540 at all: \fblah(), \fblah, \\fblah(), fblah, blah, blah(), etc, but of course
6541 only one of these is recognized by cmkey(). So we call cmkeyx() (the "no
6542 complaints" version of cmkey()), and if it fails, we try the other formats
6543 silently, and still allow for <no-name-given>, editing and reparse, etc.
6545 y = cmkeyx(fnctab,nfuncs,"Name of function","",NULL);
6546 if (y == -1) { /* Reparse needed */
6548 } else if (y == -3) {
6549 if ((x = cmcfm()) < 0) /* For recall buffer... */
6551 return(dohfunc(y)); /* -3 gives general message */
6553 if (y < 0) { /* Something given but didn't match */
6556 for (p = atmbuf; *p; p++) { /* Chop off trailing parens if any */
6562 /* Chop off leading "\\f" or "\f" or "f" */
6564 if (*p == CMDQ) /* Allow for \\f... */
6566 if (*p == CMDQ && (*(p+1) == 'f' || *(p+1) == 'F')) { /* or \f */
6568 } else if (*p == 'f' || *p == 'F') { /* or just f */
6571 y = lookup(fnctab,p,nfuncs,&dummy); /* Look up the result */
6574 printf("?No such function - \"%s\"\n",atmbuf);
6577 x = cmgbrk(); /* Find out how user terminated */
6578 if (x == LF || x == CR) /* if with CR or LF */
6579 cmflgs = 1; /* restore cmflgs to say so */
6580 if ((x = cmcfm()) < 0) /* And THEN confirm so command will */
6581 return(x); /* get into recall buffer. */
6586 case XXOPTS: /* Command-line options */
6589 case XXXOPTS: /* Extended command-line options */
6596 y = cmkeyx(kverbs,nkverbs,"Name of keyboard verb without \\k","",NULL);
6597 if (y == -1) { /* Reparse needed */
6599 } else if (y == -3) {
6600 if ((x = cmcfm()) < 0) /* For recall buffer... */
6602 return(dohkverb(y)); /* -3 gives general message */
6604 if (y < 0) { /* Something given but didn't match */
6607 for (p = atmbuf; *p; p++) { /* Chop off trailing parens if any */
6613 /* Chop off leading "\\k" or "\k" or "k" */
6615 if (*p == CMDQ) /* Allow for \\k... */
6617 if (*p == CMDQ && (*(p+1) == 'k' || *(p+1) == 'K')) { /* or \k */
6619 } else if (*p == 'k' || *p == 'K') { /* or just k */
6622 y = lookup(kverbs,p,nkverbs,&dummy); /* Look up the result */
6625 printf("?No such function - \"%s\"\n",atmbuf);
6628 x = cmgbrk(); /* Find out how user terminated */
6629 if (x == LF || x == CR) /* if with CR or LF */
6630 cmflgs = 1; /* restore cmflgs to say so */
6631 if ((x = cmcfm()) < 0) /* And THEN confirm so command will */
6632 return(x); /* get into recall buffer. */
6633 return(dohkverb(y));
6635 #endif /* NOKVERBS */
6639 return(hmsg("Syntax: KERMIT [command-line-options]\n\
6640 Lets you give command-line options at the prompt or in a script.\n\
6641 HELP OPTIONS for more info."));
6644 return(hmsg("Syntax: BACK\n Returns to your previous directory."));
6647 return(hmsg("Syntax: WHERE\n Tells where your transferred files went."));
6651 return(hmsga(hmxxremv));
6656 return(hmsga(hmxxauth));
6657 #endif /* CK_KERBEROS */
6661 return(hmsga(hmxxhttp));
6666 return(hmsg("Syntax: PIPE [ command ]\n\
6667 Makes a connection through the program whose command line is given. Example:\n\
6668 \n pipe rlogin xyzcorp.com"));
6673 "STATUS is the same as SHOW STATUS; prints SUCCESS or FAILURE for the\n\
6674 previous command."));
6678 return(hmsg("Syntax: ASSERT <condition>\n\
6679 Succeeds or fails depending on <condition>; see HELP IF for <condition>s."));
6682 return(hmsg("Always fails."));
6685 return(hmsg("Always succeeds."));
6691 "If you haved logged in to Kermit as an Internet Kermit server, the LOGOUT\n\
6692 command, given at the prompt, logs you out and closes your session."));
6693 #endif /* CK_LOGIN */
6696 return(hmsg("Closes all open files and logs."));
6700 return(hmsga(hmxxassoc));
6701 #endif /* NOCSETS */
6705 return(hmsg("Syntax: SHIFT [ n ]\n\
6706 Shifts \\%1..9 variables n places to the left; default n = 1."));
6712 return(hmsg("Syntax: MANUAL [ topic ]\n\
6713 Runs the \"man\" command on the given topic (default \"kermit\")."));
6716 return(hmsg("Syntax: MANUAL\n\
6717 Accesses the Kermit 95 HTML manual using the current browser."));
6719 return(hmsg("Syntax: MANUAL [ topic ]\n\
6720 Runs the \"help\" command on the given topic (default \"kermit\")."));
6726 return(hmsga(hmxxwild));
6729 return(hmsga(hmxxpat));
6735 return(hmsga(hmxxfast));
6740 return(hmsga(hmxxpurge));
6744 return(hmsga(hmxxpurge));
6746 #endif /* CKPURGE */
6750 return(hmsg(" RASG and RASSIGN are short forms of REMOTE ASSIGN."));
6752 return(hmsg(" RCD and RCWD are short forms of REMOTE CD."));
6754 return(hmsg(" RCOPY is a short form of REMOTE COPY."));
6756 return(hmsg(" RDELETE is a short form of REMOTE RELETE."));
6758 return(hmsg(" RDIRECTORY is a short form of REMOTE DIRECTORY."));
6760 return(hmsg(" REXIT is a short form of REMOTE EXIT."));
6762 return(hmsg(" RHELP is a short form of REMOTE HELP."));
6764 return(hmsg(" RHOST is a short form of REMOTE HOST."));
6766 return(hmsg(" RKERMIT is a short form of REMOTE KERMIT."));
6768 return(hmsg(" RMKDIR is a short form of REMOTE MKDIR."));
6770 return(hmsg(" RPRINT is a short form of REMOTE PRINT."));
6772 return(hmsg(" RPWD is a short form of REMOTE PWD."));
6774 return(hmsg(" QUERY and RQUERY are short forms of REMOTE QUERY."));
6776 return(hmsg(" RRENAME is a short form of REMOTE RENAME."));
6778 return(hmsg(" RRMDIR is a short form of REMOTE RMDIR."));
6780 return(hmsg(" RSET is a short form of REMOTE SET."));
6782 return(hmsg(" RSPACE is a short form of REMOTE SPACE."));
6784 return(hmsg(" RTYPE is a short form of REMOTE TYPE."));
6786 return(hmsg(" RWHO is a short form of REMOTE WHO."));
6790 return(hmsga(hmxxscrn));
6794 return(hmsg("Syntax: EXEC <command> [ <arg1> [ <arg2> [ ... ] ]\n\
6795 C-Kermit overlays itself with the given system command and starts it with\n\
6796 the given arguments. Upon any error, control returns to C-Kermit."));
6802 "Syntax: TRACE { /ON, /OFF } { ASSIGNMENTS, COMMAND-LEVEL, ALL }\n\
6803 Turns tracing of the given object on or off."));
6809 return(hmsga(hmxxchmod));
6811 #endif /* CK_PERMS */
6815 return(hmsga(hmxxchroot));
6820 return(hmsga(hmxxprompt));
6824 return(hmsga(hmxxgrep));
6829 return(hmsga(hmxxsexp));
6835 return(hmsga(hmxxlearn));
6836 #endif /* CKLEARN */
6840 return(hmsga(hmxxssh));
6845 return(hmsga(hmxxfirew));
6846 #endif /* TCPSOCKET */
6850 return(hmsg(" Equivalent to FTP USER."));
6852 return(hmsg(" Equivalent to FTP ACCOUNT."));
6856 return(hmsg(" Shows the directories important to Kermit."));
6859 return(hmsg(" In a FOR or WHILE loop: continue the loop.\n\
6860 At the prompt: continue a script that has \"shelled out\" to the prompt."));
6863 return(hmsg(" This command is not configured in this version of Kermit."));
6867 if ((x = cmcfm()) < 0) return(x);
6868 s = cmdbuf + (int)strlen(cmdbuf) -1;
6869 while (s >= cmdbuf && *s == SP)
6871 while (s >= cmdbuf && *s != SP)
6873 while (*s == SP) s++;
6874 printf("Sorry, help not available for \"%s\"\n",s);
6880 return(success = 0);
6883 /* H M S G -- Get confirmation, then print the given message */
6888 if ((x = cmcfm()) < 0) return(x);
6889 printf("\n%s\n\n",s);
6895 int /* Print an array of lines, */
6896 hmsga(s) char *s[]; { /* cheap version. */
6898 if ((i = cmcfm()) < 0) return(i);
6899 printf("\n"); /* Start off with a blank line */
6900 for (i = 0; *s[i]; i++) { /* Print each line. */
6901 printf("%s\n",s[i]);
6907 #else /* NOHELP not defined... */
6909 int /* Print an array of lines, */
6910 hmsga(s) char *s[]; { /* pausing at end of each screen. */
6911 extern int hmtopline; /* (This should be a parameter...) */
6912 int x, y, i, j, k, n;
6913 if ((x = cmcfm()) < 0) return(x);
6919 /* Check whether window size changed */
6920 if (ttgwsiz() > 0) {
6921 if (tt_rows > 0 && tt_cols > 0) {
6927 #endif /* CK_TTGWSIZ */
6929 printf("\n"); /* Start off with a blank line */
6930 n = (hmtopline > 0) ? hmtopline : 1; /* Line counter */
6931 for (i = 0; *s[i]; i++) {
6932 printf("%s\n",s[i]); /* Print a line. */
6933 y = (int)strlen(s[i]);
6935 for (j = 0; j < y; j++) /* See how many newlines were */
6936 if (s[i][j] == '\n') k++; /* in the string... */
6938 if (n > (cmd_rows - 3) && *s[i+1]) /* After a screenful, give them */
6939 if (!askmore()) return(0); /* a "more?" prompt. */
6947 static char *hsetxmit[] = {
6948 "Syntax: SET TRANSMIT parameter value",
6950 "Controls the behavior of the TRANSMIT command (see HELP TRANSMIT):",
6952 "SET TRANSMIT ECHO { ON, OFF }",
6953 " Whether to echo text to your screen as it is being transmitted.",
6955 "SET TRANSMIT EOF text",
6956 " Text to send after end of file is reached, e.g. \\4 for Ctrl-D",
6958 "SET TRANSMIT FILL number",
6959 " ASCII value of a character to insert into blank lines, 0 for none.",
6960 " Applies only to text mode. 0 by default.",
6962 "SET TRANSMIT LINEFEED { ON, OFF }",
6963 " Transmit Linefeed as well as Carriage Return (CR) at the end of each line.",
6964 " Normally, only CR is sent.",
6966 "SET TRANSMIT LOCKING-SHIFT { ON, OFF }",
6967 " Whether to use SO/SI for transmitting 8-bit data when PARITY is not NONE.",
6969 "SET TRANSMIT PAUSE number",
6970 " How many milliseconds to pause after transmitting each line (text mode),",
6971 " or each character (binary mode).",
6973 "SET TRANSMIT PROMPT number",
6974 " ASCII value of character to look for from host before sending next line",
6975 " when TRANSMITting in text mode; normally 10 (Linefeed). 0 means none;",
6976 " don't wait for a prompt.",
6978 "SET TRANSMIT TIMEOUT number",
6979 " Number of seconds to wait for each character to echo when TRANSMIT ECHO",
6980 " is ON or TRANSMIT PROMPT is not 0. If 0 is specified, this means wait",
6981 " indefinitely for each echo.",
6983 "Synonym: SET XMIT. SHOW TRANSMIT displays current settings.",
6987 static char *hsetbkg[] = {
6988 "Syntax: SET BACKGROUND { OFF, ON }",
6990 " SET BACKGROUND OFF forces prompts and messages to appear on your screen",
6991 " even though Kermit thinks it is running in the background.",
6995 static char *hsetbuf[] = {
6996 "Syntax: SET BUFFERS n1 [ n2 ]",
6998 " Changes the overall amount of memory allocated for SEND and RECEIVE packet",
6999 " buffers, respectively. Bigger numbers let you have longer packets and",
7000 " more window slots. If n2 is omitted, the same value as n1 is used.",
7003 " NOTE: This command is not needed in this version of Kermit, which is",
7004 " already configured for maximum-size packet buffers.",
7005 #endif /* BIGBUFOK */
7007 #endif /* DYNAMIC */
7009 static char *hsetcmd[] = {
7010 "Syntax: SET COMMAND parameter value",
7014 "SET COMMAND AUTODOWNLOAD { ON, OFF }",
7015 " Enables/Disables automatic recognition of Kermit packets while in",
7016 " command mode. ON by default.",
7018 #endif /* CK_AUTODL */
7020 "SET COMMAND BYTESIZE { 7, 8 }",
7021 " Informs Kermit of the bytesize of the communication path between itself",
7022 " and your keyboard and screen. 8 is assumed. SET COMMAND BYTE 7 only if",
7023 " 8-bit characters cannot pass.",
7027 "SET COMMAND COLOR <foreground-color> <background-color>",
7028 " Lets you choose colors for Command screen. Use ? in the color fields to",
7029 " to get lists of available colors.",
7031 "SET COMMAND CURSOR-POSITION <row> <column>",
7032 " Moves the command-screen cursor to the given position (1-based). This",
7033 " command should be used in scripts instead of relying on ANSI.SYS escape",
7040 "SET COMMAND HEIGHT <number>",
7041 " Changes the number of rows (lines) in your command screen, not",
7042 " counting the status line. Recommended values are 24, 42, and 49 (or 25,",
7043 " 43, and 50 if SET COMMAND STATUSLINE is OFF.)",
7045 "SET COMMAND HEIGHT <number>"
7046 " Changes the number of rows (lines) in your command screen, not",
7047 " counting the status line. Windowed sessions can use any value from 8 to",
7048 " 101. Fullscreen sessions are limited to 24, 42, 49, or 59. Not all"
7049 " heights are supported by all video adapters.",
7052 "SET COMMAND HEIGHT <number>",
7053 " Informs Kermit of the number of rows in your command screen for the",
7054 " purposes of More?-prompting.",
7057 "SET COMMAND WIDTH <number>",
7058 " Informs Kermit of the number of characters across your screen for",
7059 " purposes of screen formatting.",
7061 "SET COMMAND MORE-PROMPTING { ON, OFF }",
7062 " ON (the default) enables More?-prompting when Kermit needs to display",
7063 " text that does not fit vertically on your screen. OFF allows the text to",
7064 " scroll by without intervention. If your command window has scroll bars,",
7065 " you might prefer OFF.",
7069 "SET COMMAND RECALL-BUFFER-SIZE number",
7070 " How big you want Kermit's command recall buffer to be. By default, it",
7071 " holds 10 commands. You can make it any size you like, subject to memory",
7072 " constraints of the computer. A size of 0 disables command recall.",
7073 " Whenever you give this command, previous command history is lost.",
7075 #endif /* CK_RECALL */
7077 "SET COMMAND QUOTING { ON, OFF }",
7078 " Whether to treat backslash and question mark as special characters (ON),",
7079 " or as ordinary data characters (OFF) in commands. ON by default.",
7081 #ifdef DOUBLEQUOTING
7082 "SET COMMAND DOUBLEQUOTING { ON, OFF }",
7083 " Whether to allow doublequotes (\") to be used to enclose fields,",
7084 " filenames, directory names, and macro arguments that might contain",
7085 " spaces. ON by default; use OFF to force compatibility with older",
7088 #endif /* DOUBLEQUOTING */
7091 "SET COMMAND RETRY { ON, OFF }",
7092 " Whether to reprompt you with the correct but incomplete portion of a",
7093 " syntactically incorrect command. ON by default.",
7095 #endif /* CK_RECALL */
7098 "SET COMMAND SCROLLBACK <lines>",
7099 " Sets size of virtual Command screen buffer to the given number of lines,",
7100 " which includes the active Command screen. The minimum is 256. The max",
7101 " is 2 million. The default is 512.",
7103 "SET COMMAND STATUSLINE { ON, OFF }",
7104 " ON (default) enables the Kermit status line in the command screen.",
7105 " OFF removes it, making the line available for use by the host.",
7109 "Use SHOW COMMAND to display these settings.",
7113 static char *hsetcar[] = {
7114 "Syntax: SET CARRIER-WATCH { AUTO, OFF, ON }",
7116 " Attempts to control treatment of carrier (the Data Carrier Detect signal)",
7117 " on serial communication (SET LINE or SET PORT) devices. ON means that",
7118 " carrier is required at all times. OFF means carrier is never required.",
7119 " AUTO (the default) means carrier is required at all times except during",
7120 " the DIAL command. Correct operation of carrier-watch depends on the",
7121 " capabilities of the underlying OS, drivers, devices, and cables. If you",
7122 " need to CONNECT to a serial device that is not asserting carrier, and",
7123 " Kermit won't let you, use SET CARRIER-WATCH OFF. Use SHOW COMMUNICATIONS",
7124 " to display the CARRIER-WATCH setting.",
7126 #endif /* NOLOCAL */
7128 static char *hsetat[] = {
7129 "Syntax: SET ATTRIBUTES name ON or OFF",
7131 " Use this command to enable (ON) or disable (OFF) the transmission of",
7132 " selected file attributes along with each file, and to handle or ignore",
7133 " selected incoming file attributes, including:",
7136 " CHARACTER-SET: The transfer character set for text files",
7137 #endif /* NOCSETS */
7138 " DATE: The file's creation date",
7139 " DISPOSITION: Unusual things to do with the file, like MAIL or PRINT",
7140 " LENGTH: The file's length",
7141 " PROTECTION: The file's protection (permissions)",
7142 " SYSTEM-ID: Machine/Operating system of origin",
7143 " TYPE: The file's type (text or binary)",
7145 "You can also specify ALL to select all of them. Examples:",
7147 " SET ATTR DATE OFF",
7148 " SET ATTR LENGTH ON",
7149 " SET ATTR ALL OFF",
7151 "Also see HELP SET SEND and HELP SET RECEIVE.",
7155 static char *hxytak[] = {
7156 "Syntax: SET TAKE parameter value",
7158 " Controls behavior of TAKE command:",
7160 "SET TAKE ECHO { ON, OFF }",
7161 " Tells whether commands read from a TAKE file should be displayed on the",
7162 " screen (if so, each command is shown at the time it is read, and labeled",
7163 " with a line number).",
7165 "SET TAKE ERROR { ON, OFF }",
7166 " Tells whether a TAKE command file should be automatically terminated when",
7167 " a command fails. This setting is local to the current command file, and",
7168 " inherited by subordinate command files.",
7173 static char *hxymouse[] = {
7174 "Syntax: SET MOUSE ACTIVATE { ON, OFF }",
7175 " Enables or disables the mouse in Connect mode. Default is ON",
7177 "Syntax: SET MOUSE BUTTON <number> <key-modifier> <action> [ <text> ]",
7179 " <number> is the mouse button number, 1, 2, or 3;",
7180 " <key-modifier> denotes modifier keys held down during the mouse event:",
7181 " ALT, ALT-SHIFT, CTRL, CTRL-ALT CTRL-ALT-SHIFT, CTRL-SHIFT, SHIFT, NONE;",
7182 " <action> is the mouse action, CLICK, DRAG, or DOUBLE-CLICK.",
7184 " The <text> has exactly the same properties as the <text> from the SET KEY",
7185 " command -- it can be a character, a string, one or more Kverbs, a macro",
7186 " invoked as a Kverb, or any combination of these. Thus, anything that can",
7187 " be assigned to a key can also be assigned to the mouse -- and vice versa.",
7188 " If the <text> is omitted, the action will be ignored. Examples:",
7190 " SET MOUSE BUTTON 1 NONE DOUBLE \\KmouseCurPos",
7191 " SET MOU B 2 SHIFT CLICK help\\13",
7193 " DRAG operations perform a \"mark mode\" selection of Text. You should",
7194 " assign only the following actions to drag operations:",
7196 " \\Kdump - copy marked text to printer (or file)",
7197 " \\Kmarkcopyclip - copy marked text to PM Clipboard",
7198 " \\Kmarkcopyhost - copy marked text direct to Host",
7199 " \\Kmousemark - mark text, no copy operation performed",
7201 " The following Kverb is only for use with the mouse:",
7205 " which represents the mouse-directed terminal cursor feature.",
7207 "Syntax: SET MOUSE CLEAR",
7208 " Restores all mouse events to their default definitions",
7209 " Button 1 Ctrl-Click = Kverb: \\Kmouseurl",
7210 " Button 1 Double-Click = Kverb: \\Kmousecurpos",
7211 " Button 1 Drag = Kverb: \\Kmarkcopyclip",
7212 " Button 1 Alt-Drag = Kverb: \\Kmarkcopyclip_noeol",
7213 " Button 1 Ctrl-Drag = Kverb: \\Kmarkcopyhost",
7214 " Button 1 Ctrl-Alt-Drag = Kverb: \\Kmarkcopyhost_noeol",
7215 " Button 1 Ctrl-Shift-Drag = Kverb: \\Kdump",
7216 " Button 2 Double-Click = Kverb: \\Kpaste",
7217 " Button 2 Drag = Kverb: \\Kmarkcopyhost",
7218 " Button 2 Alt-Drag = Kverb: \\Kmarkcopyhost_noeol ",
7219 " Button 3 Double-Click = Kverb: \\Kpaste",
7221 #endif /* OS2MOUSE */
7223 static char *hxyterm[] = {
7224 "Syntax: SET TERMINAL parameter value",
7227 "SET TERMINAL TYPE { ANSI, VT52, VT100, VT102, VT220, VT320, ... }",
7228 " Selects type type of terminal to emulate. Type SET TERMINAL TYPE ? to",
7229 " see a complete list.",
7231 "SET TERMINAL ANSWERBACK { OFF, ON }",
7232 " Disables/enables the ENQ/Answerback sequence (\"K-95 version term-type\").",
7234 "SET TERMINAL ANSWERBACK MESSAGE <extension>",
7235 " Allows you to specify an extension to the default answerback message.",
7238 "SET TERMINAL TYPE ...",
7239 " This command is not available because this version of Kermit does not",
7240 " include a terminal emulator. Instead, it is a \"semitransparent pipe\"",
7241 " (or a totally transparent one, if you configure it that way) to the",
7242 " computer or service you have made a connection to. Your console,",
7243 " workstation window, or the terminal emulator or terminal from which you",
7244 " are running Kermit provides the emulation.",
7249 "SET TERMINAL APC { ON, OFF, NO-INPUT, NO-INPUT-UNCHECKED, UNCHECKED }",
7251 " Controls execution of Application Program Commands sent by the host while",
7252 " K-95 is either in CONNECT mode or processing INPUT commands. ON allows",
7253 " execution of \"safe\" commands and disallows potentially dangerous ones",
7254 " such as DELETE, RENAME, OUTPUT, and RUN. OFF prevents execution of APCs.",
7255 " UNCHECKED allows execution of all APCs. OFF is the default.",
7257 " Controls execution of Application Program Commands sent by the host while",
7258 " C-Kermit is in CONNECT mode. ON allows execution of \"safe\" commands and",
7259 " disallows potentially dangerous commands such as DELETE, RENAME, OUTPUT,",
7260 " and RUN. OFF prevents execution of APCs. UNCHECKED allows execution of",
7261 " all APCs. OFF is the default.",
7267 "SET TERMINAL ARROW-KEYS { APPLICATION, CURSOR }",
7268 " Sets the mode for the arrow keys during VT terminal emulation.",
7270 "SET TERMINAL ATTRIBUTE { BLINK, DIM, PROTECTED, REVERSE, UNDERLINE }",
7271 " Determines how attributes are displayed by Kermit-95.",
7273 "SET TERMINAL ATTRIBUTE { BLINK, DIM, REVERSE, UNDERLINE } { ON, OFF }",
7274 " Determines whether real Blinking, Dim, Reverse, and Underline are used in",
7275 " the terminal display. When BLINK is turned OFF, reverse background",
7276 " intensity is used. When DIM is turned OFF, dim characters appear BOLD.",
7277 " When REVERSE and UNDERLINE are OFF, the colors selected with SET",
7278 " TERMINAL COLOR { REVERSE,UNDERLINE } are used instead. This command",
7279 " affects the entire current screen and terminal scrollback buffer.",
7281 "SET TERMINAL ATTRIBUTE PROTECTED [ -",
7282 " { BOLD, DIM, INVISIBLE, NORMAL, REVERSE, UNDERLINED } ]",
7283 " Sets the attributes used to represent Protected text in Wyse and Televideo",
7284 " terminal emulations. Any combination of attributes may be used. The",
7285 " default is DIM.)",
7291 "SET TERMINAL AUTODOWNLOAD { ON, OFF, ERROR { STOP, CONTINUE } }",
7292 " enables/disables automatic switching into file-transfer mode when a Kermit",
7293 " or ZMODEM file transfer has been detected during CONNECT mode or while",
7294 " an INPUT command is active. Default is OFF.",
7296 "SET TERMINAL AUTODOWNLOAD { ON, OFF, ERROR { STOP, CONTINUE } }",
7297 " enables/disables automatic switching into file-transfer mode when a Kermit",
7298 " file transfer has been detected during CONNECT mode or while an INPUT",
7299 " command is active. Default is OFF.",
7303 " When TERMINAL AUTODOWNLOAD is ON, the TERMINAL AUTODOWNLOAD ERROR setting",
7304 " tells what to do if an error occurs during a file transfer or other",
7305 " protocol operation initiated by the terminal emulator: STOP (the default)",
7306 " means to remain in command mode so you can see what happened; CONTINUE",
7307 " means to resume the CONNECT session (e.g. so a far-end script can continue",
7312 "SET TERM... AUTO... { KERMIT, ZMODEM } C0-CONFLICTS { IGNORED, PROCESSED }",
7313 " Determines whether the active terminal emulator should process or ignore",
7314 " C0 control characters which are also used for the specified file transfer",
7315 " protocol. Kermit by default uses ^A (SOH) and Zmodem uses ^X (CAN).",
7316 " Default is PROCESSED.",
7318 "SET TERM... AUTO... { KERMIT, ZMODEM } DETECTION-METHOD { PACKET, STRING }",
7319 " Determines whether the specified file transfer protocol should be detected",
7320 " by looking for valid packets or by identifying a specified text string.",
7321 " Default is PACKET.",
7323 "SET TERM... AUTO... { KERMIT, ZMODEM } STRING <text>",
7324 " Lets you assign an autodownload detection string for use with the",
7325 " specified file transfer protocol.",
7326 " Default for Kermit is \"READY TO SEND...\", for Zmodem is \"rz\\{13}\".",
7329 "SET TERM... AUTO... KERMIT C0-CONFLICTS { IGNORED, PROCESSED }",
7330 " Determines whether the active terminal emulator should process or ignore",
7331 " C0 control characters which are also used for the specified file transfer",
7332 " protocol. Kermit by default uses ^A <SOH>. Default is PROCESSED.",
7334 "SET TERM... AUTO... KERMIT DETECTION-METHOD { PACKET, STRING }",
7335 " Determines whether the specified file transfer protocol should be detected",
7336 " by looking for valid packets or by identifying a specified text string.",
7337 " Default is PACKET.",
7339 "SET TERM... AUTO... KERMIT STRING <text>",
7340 " Lets you assign an autodownload detection string for use with the",
7341 " specified file transfer protocol. Default is \"READY TO SEND...\".",
7344 "SET TERMINAL AUTOPAGE { ON, OFF }",
7346 "SET TERMINAL AUTOSCROLL { ON, OFF }",
7349 "SET TERMINAL AUTODOWNLOAD { ON, OFF, ERROR { STOP, CONTINUE } }",
7350 " Enables/disables automatic switching into file-transfer mode when a valid",
7352 " Kermit or ZMODEM packet of the appropriate type is received during CONNECT",
7353 " mode. Default is OFF.",
7355 " Kermit packet of the appropriate type is received during CONNECT mode.",
7360 " When TERMINAL AUTODOWNLOAD is ON, the TERMINAL AUTODOWNLOAD ERROR setting",
7361 " tells what to do if an error occurs during a file transfer or other",
7362 " protocol operation initiated by the terminal emulator: STOP (the default)",
7363 " means to remain in command mode so you can see what happened; CONTINUE",
7364 " means to resume the CONNECT session (e.g. so a far-end script can continue",
7371 "SET TERMINAL BELL { AUDIBLE, VISIBLE, NONE }",
7372 " Specifies how Control-G (bell) characters are handled. AUDIBLE means",
7373 " a beep is sounded; VISIBLE means the screen is flashed momentarily.",
7375 " (This command has been superseded by SET BELL.)",
7379 "SET TERMINAL BYTESIZE { 7, 8 }",
7380 " Use 7- or 8-bit characters between Kermit and the remote computer during",
7381 " terminal sessions. The default is 8.",
7386 "SET TERMINAL CHARACTER-SET <remote-cs>",
7387 " Specifies the character set used by the remote host, <remote-cs>.",
7388 " Equivalent to SET TERM REMOTE-CHARACTER-SET <remote-cs> ALL. For more",
7389 " control over the details, use SET TERM REMOTE-CHARACTER-SET and (in",
7390 " non-GUI K95 versions) SET TERM LOCAL-CHARACTER-SET; these are explained",
7391 " below. The default TERMINAL CHARACTER-SET is LATIN1 (ISO 8859-1).",
7393 "SET TERMINAL CHARACTER-SET <remote-cs> [ <local-cs> ]",
7394 " Specifies the character set used by the remote host, <remote-cs>, and the",
7395 " character set used by C-Kermit locally, <local-cs>. If you don't specify",
7396 " the local character set, the current FILE CHARACTER-SET is used. When",
7397 " you specify two different character sets, C-Kermit translates between them",
7398 " during CONNECT. By default, both character sets are TRANSPARENT, and",
7399 " no translation is done.",
7402 #endif /* NOCSETS */
7406 "SET TERMINAL CODE-PAGE <number>",
7407 " Lets you change the PC code page. Only works for code pages that are",
7408 " successfully prepared in CONFIG.SYS. Use SHOW TERMINAL to list the",
7409 " current code page and the available code pages.",
7412 " Also see SET TERMINAL FONT if the desired code page in not available in",
7413 " your version of OS/2.",
7414 #endif /* OS2ONLY */
7418 "SET TERMINAL COLOR BORDER <foreground>",
7420 "SET TERMINAL COLOR <screenpart> <foreground> <background>",
7421 " Sets the colors of the terminal emulation screen.",
7422 " <screenpart> may be any of the following:",
7423 " DEBUG, HELP-TEXT, REVERSE, SELECTION, STATUS-LINE, TERMINAL-SCREEN, or",
7424 " UNDERLINED-TEXT.",
7425 " <foreground> and <background> may be any of:",
7426 " BLACK, BLUE, GREEN, CYAN, RED, MAGENTA, BROWN, LGRAY, DGRAY, LBLUE,",
7427 " LGREEN, LCYAN, LRED, LMAGENTA, YELLOW or WHITE.",
7428 " The L prefix for the color names means Light.",
7431 "SET TERMINAL COLOR ERASE { CURRENT-COLOR, DEFAULT-COLOR }",
7432 " Determines whether the current color as set by the host or the default",
7433 " color as set by the user (SET TERMINAL COLOR TERMINAL) is used to clear",
7434 " the screen when erase commands are received from the host.",
7437 "SET TERMINAL COLOR RESET-ON-ESC[0m { CURRENT-COLOR, DEFAULT-COLOR }",
7438 " Determines whether the current color or the default color is used after",
7439 " <ESC>[0m (\"reset attributes\") command sequence is received from the",
7443 "SET TERMINAL CONTROLS { 7, 8 }",
7444 " Determines whether VT220/320 or Wyse 370 function keys, arrow keys, etc,",
7445 " that generate ANSI-format escape sequences should send 8-bit control",
7446 " characters or 7-bit escape sequences.",
7450 "SET TERMINAL CR-DISPLAY { CRLF, NORMAL }",
7451 " Specifies how incoming carriage return characters are to be displayed",
7457 "SET TERMINAL CURSOR { FULL, HALF, UNDERLINE } {ON, OFF, NOBLINK}",
7458 " Selects the cursor style and visibility for the terminal screen.",
7460 "SET TERMINAL CURSOR { FULL, HALF, UNDERLINE } {ON, OFF}",
7461 " Selects the cursor style and visibility for the terminal screen.",
7464 "SET TERMINAL DG-UNIX-MODE { ON, OFF }",
7465 " Specifies whether the Data General emulations should accept control",
7466 " sequences in Unix compatible format or in native DG format. The",
7467 " default is OFF, DG format.",
7471 "SET TERMINAL DEBUG { ON, OFF }",
7472 " Turns terminal session debugging on and off. When ON, incoming control",
7473 " characters are displayed symbolically, rather than be taken as formatting",
7474 " commands. SET TERMINAL DEBUG ON implies SET TELNET DEBUG ON.",
7477 "SET TERMINAL DG-UNIX-MODE { ON, OFF }",
7481 "SET TERMINAL ECHO { LOCAL, REMOTE }",
7482 " Specifies which side does the echoing during terminal connection.",
7485 "SET TERMINAL ESCAPE-CHARACTER { ENABLED, DISABLED }",
7486 " Turns on/off the ability to escape back from CONNECT mode using the SET",
7488 " ESCAPE character. If you disable it you can still get back using Alt-key",
7489 " combinations as shown in the status line. Also see HELP SET ESCAPE.",
7491 " ESCAPE character. If you disable it, Kermit returns to its prompt only",
7492 " when the connection is closed by the other end. USE WITH EXTREME CAUTION.",
7493 " Also see HELP SET ESCAPE.",
7499 "SET TERMINAL FONT <facename> <height>",
7500 " Specifies the font to be used in the Kermit 95 window. The font is",
7501 " determined by the choice of a facename and a height measured in Points.",
7502 " The available facenames are those installed in the Font Control Panel.",
7506 "SET TERMINAL FONT { CP437, CP850, CP852, CP862, CP866, DEFAULT }",
7507 " CP437 - Original PC code page",
7508 " CP850 - \"Multilingual\" (West Europe) code page",
7509 " CP852 - East Europe Roman Alphabet code page (for Czech, Polish, etc)",
7510 " CP862 - Hebrew code page",
7511 " CP866 - Cyrillic (Russian, Belorussian, and Ukrainian) code page",
7513 " Loads a soft into the video adapter for use during terminal emulation.",
7514 " Use this command when your OS/2 system does not have the desired code.",
7515 " page. Can be used only in full-screen sessions. Also see SET TERMINAL",
7516 " CODE-PAGE and SET TERMINAL REMOTE-CHARACTER-SET.",
7518 #endif /* OS2ONLY */
7522 "SET TERMINAL HEIGHT <number>",
7523 " Changes the number of rows (lines) to use during terminal emulation, not",
7524 " counting the status line. Recommended values are 24, 42, and 49 (or 25,",
7525 " 43, and 50 if SET TERMINAL STATUSLINE is OFF.)",
7527 "SET TERMINAL HEIGHT <number>"
7528 " Changes the number of rows (lines) to use during terminal emulation, not",
7529 " counting the status line. Windowed sessions can use any value from 8 to",
7530 " 101. Fullscreen sessions are limited to 24, 42, 49, or 59. Not all"
7531 " heights are supported by all video adapters.",
7534 "SET TERMINAL HEIGHT <number>",
7535 " Tells C-Kermit how many rows (lines) are on your CONNECT-mode screen.",
7540 "SET TERMINAL IDLE-TIMEOUT <number>",
7541 " Sets the limit on idle time in CONNECT mode to the given number of",
7542 " seconds. 0 (the default) means no limit.",
7544 "SET TERMINAL IDLE-ACTION { EXIT, HANGUP, OUTPUT [ text ], RETURN }",
7545 " Specifies the action to be taken when a CONNECT session is idle for the",
7546 " number of seconds given by SET TERMINAL IDLE-TIMEOUT. The default action",
7547 " is to RETURN to command mode. EXIT exits from Kermit; HANGUP hangs up the",
7548 " connection, and OUTPUT sends the given text to the host without leaving",
7549 " CONNECT mode; if no text is given a NUL (0) character is sent.",
7552 "And for Telnet connections:",
7554 "SET TERMINAL IDLE-ACTION { TELNET-NOP, TELNET-AYT }",
7555 " Sends the indicated Telnet protocol message: No Operation (NOP) or",
7556 " \"Are You There?\" (AYT).",
7559 #endif /* CKTIDLE */
7563 "SET TERMINAL KDB-FOLLOWS-GL/GR { ON, OFF }",
7564 " Specifies whether or not the keyboard character set should follow the",
7565 " active GL and GR character sets. This feature is OFF by default and",
7566 " should not be used unless it is specificly required by the host",
7570 "SET TERMINAL KEY <mode> /LITERAL <keycode> <text>",
7571 "SET TERMINAL KEY <mode> DEFAULT",
7572 "SET TERMINAL KEY <mode> CLEAR",
7573 " Configures the key whose <keycode> is given to send the given text when",
7574 " pressed while <mode> is active. <mode> may be any of the valid terminal",
7575 " types or the special modes \"EMACS\", \"HEBREW\" or \"RUSSIAN\". DEFAULT",
7576 " restores all default key mappings for the specified mode. CLEAR erases",
7577 " all the key mappings. If there is no text, the default key binding is",
7579 " restored for the key k. SET TERMINAL KEY mappings take place before",
7580 " terminal character-set translation. SET KEY mappings take precedence over",
7581 " SET TERMINAL KEY <terminal type> settings.",
7583 " restored for the key. SET KEY mappings take precedence over SET TERMINAL",
7584 " KEY <terminal type> settings.",
7585 #endif /* NOCSETS */
7586 " The /LITERAL switch may be used to instruct Kermit to ignore character-set",
7587 " translations when sending this definition to the host.",
7589 " The text may contain \"\\Kverbs\" to denote actions, to stand for DEC",
7590 " keypad, function, or editing keys, etc. For a list of available keyboard",
7591 " verbs, type SHOW KVERBS.",
7593 " To find out the keycode and mapping for a particular key, use the SHOW",
7594 " KEY command. Use the SAVE KEYS command to save all settings to a file.",
7596 "SET TERMINAL KEYBOARD-MODE { NORMAL, EMACS, RUSSIAN, HEBREW }",
7597 " Select a special keyboard mode for use in the terminal screen.",
7600 "SET TERMINAL KEYPAD-MODE { APPLICATION, NUMERIC }",
7601 " Specifies the \"mode\" of the numeric keypad for VT terminal emulation.",
7602 " Use this command in case the host or application wants the keypad to be",
7603 " in a different mode than it's in, but did not send the escape sequence",
7604 " to put it in the needed mode.",
7607 "SET TERMINAL LINE-SPACING <float>",
7608 " Specifies the line spacing used when displaying text. The default is 1.0.",
7609 " Valid values range from 1.0 to 3.0 inclusive.",
7616 "SET TERMINAL LOCAL-CHARACTER-SET <local-cs>",
7617 " Specifies the character set used by K-95 locally. If you don't specify",
7619 " the local character-set, the current TERMINAL FONT is used if you have",
7620 " given a SET TERMINAL FONT command; otherwise the current codepage is used.",
7622 " the local character-set, the current code page is used.",
7623 #endif /* OS2ONLY */
7625 " When the local and remote character sets differ, Kermit translates between",
7626 " them during CONNECT. By default, the remote character set is Latin1 and",
7627 " the local one is your current code page.",
7630 " In Windows NT, Unicode is used as the local character-set regardless of",
7634 "See also SET TERMINAL REMOTE-CHARACTER-SET",
7637 #endif /* NOCSETS */
7640 "SET TERMINAL LOCKING-SHIFT { OFF, ON }",
7641 " Tells whether to send Shift-In/Shift-Out (Ctrl-O and Ctrl-N) to switch",
7642 " between 7-bit and 8-bit characters sent during terminal emulation over",
7643 " 7-bit connections. OFF by default.",
7645 "SET TERMINAL LOCKING-SHIFT { OFF, ON }",
7646 " Tells Kermit whether to use Shift-In/Shift-Out (Ctrl-O and Ctrl-N) to",
7647 " switch between 7-bit and 8-bit characters during CONNECT. OFF by default.",
7652 "SET TERMINAL MARGIN-BELL { ON [column], OFF }",
7653 " Determines whether the margin-bell is activated and what column it should",
7654 " ring at. OFF by default.",
7658 "SET TERMINAL NEWLINE-MODE { OFF, ON }",
7659 " Tells whether to send CRLF (Carriage Return and Line Feed) when you type",
7660 " CR (press the Return or Enter key) in CONNECT mode.",
7664 "SET TERMINAL OUTPUT-PACING <milliseconds>",
7665 " Tells how long to pause between sending each character to the host during",
7666 " CONNECT mode. Normally not needed but sometimes required to work around",
7667 " TRANSMISSION BLOCKED conditions when pasting into the terminal window.",
7671 "SET TERMINAL PCTERM { ON, OFF }",
7672 " Activates or deactivates the PCTERM terminal emulation keyboard mode.",
7673 " When PCTERM is ON all keystrokes in the terminal screen are sent to the",
7674 " host as make/break (down/up) codes instead of as characters from the",
7675 " REMOTE-CHARACTER-SET, and all keyboard mappings, including Kverbs and the",
7676 " escape character are disabled. To turn off PCTERM keyboard mode while in",
7677 " CONNECT mode press Control-CapsLock. PCTERM is OFF by default.",
7683 "SET TERMINAL PRINT { AUTO, COPY, OFF, USER }",
7684 " Allows selective control of various types of printing from the Terminal",
7685 " session. AUTO prints a line of text from the terminal screen whenever",
7686 " the cursor is moved off the line. COPY prints every byte received as",
7687 " it is received without interpretation. USER prints every byte after",
7688 " interpretation by the terminal emulator translates character-sets and",
7689 " construct escape sequences, ... The default is OFF.",
7693 "SET TERMINAL PRINT { ON, OFF }",
7694 " Enables and disables host-initiated transparent printing in CONNECT mode.",
7701 "SET TERMINAL REMOTE-CHARACTER-SET <remote-cs> [ { G0,G1,G2,G3 }... ]",
7702 " Specifies the character set used by the remote host, <remote-cs>.",
7703 " When the local and remote character sets differ, Kermit translates",
7704 " between them during CONNECT. By default, the remote character set is",
7705 " Latin1 and the local one is your current code page. Optionally, you can",
7706 " also designate the character set to the G0..G3 graphic tables.",
7708 #endif /* NOCSETS */
7712 "SET TERMINAL ROLL-MODE { INSERT, OVERWRITE, KEYSTROKES [ option ] }",
7713 " Tells whether new data when received from the host is entered into the",
7714 " scrollback buffer at the current rollback position (OVERWRITE) or at the",
7715 " end of the buffer (INSERT). The default is INSERT. Typing is allowed",
7716 " during rollbacks in either mode, according to SET TERM ROLL KEYSTROKES:",
7717 " SEND (the default) means to process keystrokes normally; IGNORE means to",
7718 " ignore them when the screen is scrolled back; RESTORE-AND-SEND is like",
7719 " SEND but restores the screen to its active position first.",
7722 "SET TERMINAL SCREEN-MODE { NORMAL, REVERSE }",
7723 " When set to REVERSE the foreground and background colors are swapped as",
7724 " well as the application of the foreground and background intensity bits.",
7725 " The default is NORMAL.",
7728 "SET TERMINAL SCREEN-OPTIMIZE { ON, OFF }",
7729 " When set to ON, the default, Kermit only paints the screen with characters",
7730 " that have changed since the last screen paint. When OFF, the screen is",
7731 " completely repainted each time there is a change.",
7734 "SET TERMINAL SCREEN-UPDATE { FAST, SMOOTH } [ <milliseconds> ]",
7735 " Chooses the mechanism used for screen updating and the update frequency.",
7736 " Defaults are FAST scrolling with updates every 100 milliseconds.",
7739 "SET TERMINAL SCROLLBACK <lines>",
7740 " Sets size of CONNECT virtual screen buffer. <lines> includes the active",
7741 " terminal screen. The minimum is 256. The maximum is 2 million. The",
7742 " default is 2000.",
7745 "SET TERMINAL SEND-DATA { ON, OFF }",
7746 " Determines whether ASCII emulations such as WYSE 30,50,60 or TVI 910+,925,",
7747 " 950 may send their screen contents to the host upon request. Allowing the",
7748 " screen to be read by the host is a significant security risk. The default",
7749 " is OFF and should only be changed after a security evaluation of host",
7753 "SET TERMINAL SEND-END-OF-BLOCK { CRLF_ETX, US_CR }",
7754 " Determines which set of characters should be used as end of line and end",
7755 " of transmission indicators when sending screen data to the host",
7758 "SET TERMINAL SGR-COLORS { ON, OFF }",
7759 " ON (default) means allow host control of colors; OFF means ignore host",
7760 " escape sequences to set color.",
7763 "SET TERMINAL SNI-CH.CODE { ON, OFF }",
7764 " This command controls the state of the CH.CODE key. It is the equivalent",
7765 " to the SNI_CH_CODE Keyboard verb. The SNI terminal uses CH.CODE to",
7766 " easily switch between the National Language character set and U.S. ASCII.",
7767 " The default is ON which means to display characters as U.S. ASCII. When",
7768 " OFF the lanuage specified by SET TERMINAL SNI-LANUAGE is used to display",
7769 " characters when 7-bit character sets are in use."
7771 "SET TERMINAL SNI-FIRMWARE-VERSIONS <kbd-version> <terminal-version>",
7772 " Specifies the Firmware Version number that should be reported to the host",
7773 " when the terminal is queried. The default is 920031 for the keyboard",
7774 " and 830851 for the terminal.",
7776 "SET TERMINAL SNI-LANGUAGE <national-language>",
7777 " An alias for SET TERMINAL VT-LANUAGE, this command specifies the national",
7778 " language character-set that should be used when the NRC mode is activated",
7779 " for VT emulations or when CH.CODE is OFF for SNI emulations. The default",
7780 " language for SET TERMINAL TYPE SNI-97801 is \"German\".",
7782 "SET TERMINAL SNI-PAGEMODE { ON, OFF }",
7783 " Determines whether or not page mode is active. OFF by default.",
7785 "SET TERMINAL SNI-SCROLLMODE { ON, OFF }",
7786 " Determines whether or not scroll mode is active. OFF by default.",
7788 "SET TERMINAL STATUSLINE { ON, OFF }",
7789 " ON (default) enables the Kermit status line in the terminal screen.",
7790 " OFF removes it, making the line available for use by the host.",
7793 "SET TERMINAL TRANSMIT-TIMEOUT <seconds>",
7794 " Specifies the maximum amount of time K-95 waits before returning to the",
7795 " prompt if your keystrokes can't be transmitted for some reason, such as a",
7796 " flow-control deadlock.",
7801 "SET TERMINAL TRIGGER <string>",
7802 " Specifies a string that, when detected during any subsequent CONNECT",
7803 " session, is to cause automatic return to command mode. Give this command",
7804 " without a string to cancel the current trigger. See HELP CONNECT for",
7805 " additional information.",
7807 #endif /* CK_TRIGGER */
7810 "SET TERMINAL URL-HIGHLIGHT { ON <attribute>, OFF }",
7811 " Specifies whether K-95 should highlight URLs and which screen attribute",
7812 " should be used. The screen attributes can be one of NORMAL, BLINK, BOLD,",
7813 " DIM, INVISIBLE, REVERSE, or UNDERLINE. The default is ON using the",
7814 " BOLD screen attribute.",
7816 "SET TERMINAL VIDEO-CHANGE { DISABLED, ENABLED }",
7817 " Specifies whether K-95 should change video modes automatically in response",
7819 " to escape sequences from the other computer. ENABLED by default (except",
7822 " to escape sequences from the other computer. ENABLED by default.",
7826 "SET TERMINAL VT-LANGUAGE <language>",
7827 " Specifies the National Replacement Character Set (NRC) to be used when",
7828 " NRC mode is activated. The default is \"North American\".",
7830 "SET TERMINAL VT-NRC-MODE { ON, OFF }",
7831 " OFF (default) chooses VT multinational Character Set mode. OFF chooses",
7832 " VT National Replacement Character-set mode. The NRC is selected with",
7833 " SET TERMINAL VT-LANGUAGE",
7837 "SET TERMINAL WIDTH <cols>",
7838 " Tells the number of columns in the terminal screen.",
7840 " The default is 80. You can also use 132. Other widths can be chosen but",
7841 " are usually not supported by host software.",
7844 "SET TERMINAL WIDTH <cols>",
7845 " Tells how many columns define the terminal size.",
7847 "Default is 80. In Windowed OS/2 2.x sessions, this value may not be changed",
7848 "In Windowed OS/2 WARP 3.x sessions, this value may range from 20 to 255.",
7849 "In Full screen sessions, values of 40, 80, and 132 are valid. Not all",
7850 "combinations of height and width are supported on all adapters.",
7853 "SET TERMINAL WRAP { OFF, ON }",
7854 " Tells whether the terminal emulator should automatically wrap long lines",
7859 "SET TERMINAL WIDTH <number>",
7861 Tells Kermit how many columns (characters) are on your CONNECT-mode screen.",
7864 "Type SHOW TERMINAL to see current terminal settings.",
7866 #endif /* NOLOCAL */
7869 static char *hxyhost[] = {
7870 "SET HOST [ switches ] hostname-or-address [ service ] [ protocol-switch ]",
7871 " Establishes a connection to the specified network host on the currently",
7872 " selected network type. For TCP/IP connections, the default service is",
7873 " TELNET; specify a different TCP port number or service name to choose a",
7874 " different service. The first set of switches can be:",
7876 " /NETWORK-TYPE:name",
7877 " Makes the connection on the given type of network. Equivalent to SET",
7878 " NETWORK TYPE name prior to SET HOST, except that the selected network",
7879 " type is used only for this connection. Type \"set host /net:?\" to see",
7881 " a list. /NETWORK-TYPE:COMMAND means to make the connection through the",
7882 " given system command, such as \"rlogin\" or \"cu\".",
7889 Enter CONNECT (terminal) mode automatically if the connection is successful.",
7892 " Enter server mode automatically if the connection is successful.",
7894 " /USERID:[<name>]",
7895 " This switch is equivalent to SET LOGIN USERID <name> or SET TELNET",
7896 " ENVIRONMENT USER <name>. If a string is given, it sent to host during",
7897 " Telnet negotiations; if this switch is given but the string is omitted,",
7898 " no user ID is sent to the host. If this switch is not given, your",
7899 " current USERID value, \\v(userid), is sent. When a userid is sent to the",
7900 " host it is a request to login as the specified user.",
7902 #ifdef CK_AUTHENTICATION
7903 " /PASSWORD:[<string>]",
7904 " This switch is equivalent to SET LOGIN PASSWORD. If a string is given,",
7905 " it is treated as the password to be used (if required) by any Telnet",
7906 " Authentication protocol (Kerberos Ticket retrieval, Secure Remote",
7907 " Password, or X.509 certificate private key decryption.) If no password",
7908 " switch is specified a prompt is issued to request the password if one",
7909 " is required for the negotiated authentication method.",
7911 #endif /* CK_AUTHENTICATION */
7912 "The protocol-switches can be:",
7915 " Do not send initial Telnet negotiations even if this is a Telnet port.",
7918 " This is a connection to a raw TCP socket.",
7922 " Use Rlogin protocol even if this is not an Rlogin port.",
7924 #endif /* RLOGCODE */
7926 " Send initial Telnet negotiations even if this is not a Telnet port.",
7932 " Use Kerberos IV klogin protocol even if this is not a klogin port.",
7934 #ifdef CK_ENCRYPTION
7936 " Use Kerberos IV Encrypted login protocol even if this is not an eklogin",
7939 #endif /* CK_ENCRYPTION */
7943 " Use Kerberos V klogin protocol even if this is not a klogin port.",
7945 #ifdef CK_ENCRYPTION
7947 " Use Kerberos V Encrypted login protocol even if this is not an eklogin",
7950 #endif /* CK_ENCRYPTION */
7952 #endif /* RLOGCODE */
7953 #endif /* CK_KERBEROS */
7956 " Perform SSL negotiations.",
7959 " Perform SSL negotiations and if successful start Telnet negotiations.",
7962 " Perform TLS negotiations.",
7965 " Perform TLS negotiations and if successful start Telnet negotiations.",
7969 " SET HOST kermit.columbia.edu",
7970 " SET HOST /CONNECT kermit.columbia.edu",
7972 " SET HOST /SERVER * 1649",
7973 " SET HOST 128.59.39.2",
7974 " SET HOST madlab.sprl.umich.edu 3000",
7975 " SET HOST xyzcorp.com 2000 /RAW-SOCKET",
7977 " SET HOST /NET:SSH kermit.columbia.edu /x11-forwarding:on",
7978 #endif /* SSHBUILTIN */
7980 " SET HOST /CONNECT /COMMAND rlogin xyzcorp.com",
7986 " . The TELNET command is equivalent to SET NETWORK TYPE TCP/IP,",
7987 " SET HOST name [ port ] /TELNET, IF SUCCESS CONNECT",
7989 " . For SUPERLAT connections, the hostname-or-address may be either a service",
7990 " name, or a node/port combination, as required by your LAT host.",
7992 "The TELNET command is equivalent to SET NETWORK TYPE TCP/IP,",
7993 "SET HOST name [ port ] /TELNET, IF SUCCESS CONNECT",
7994 #endif /* SUPERLAT */
7996 "Also see SET NETWORK, TELNET, SET TELNET.",
7999 static char *hmxyauth[] = {
8000 "Synatx: SET AUTHENTICATION <auth_type> <parameter> <value>",
8001 " Sets defaults for the AUTHENTICATE command:",
8004 "SET AUTHENTICATION KERBEROS5 ADDRESSES {list of ip-addresses}",
8005 " Specifies a list of IP addresses that should be placed in the Ticket",
8006 " Getting Ticket in addition to the local machine addresses.",
8008 "SET AUTHENTICATION { KERBEROS4, KERBEROS5 } AUTODESTROY",
8009 " { ON-CLOSE, ON-EXIT, NEVER }",
8010 " When ON, Kermit will destroy all credentials in the default",
8011 " credentials cache upon Kermit termination. Default is NEVER.",
8013 "SET AUTHENTICATION { KERBEROS4, KERBEROS5 } AUTOGET { ON, OFF }",
8014 " When ON, if the host offers Kerberos 4 or Kerberos 5 authentication",
8015 " and Kermit is configured to use that authentication method and there",
8016 " is no TGT, Kermit will automatically attempt to retrieve one by",
8017 " prompting for the password (and principal if needed.) Default is ON.",
8019 "SET AUTHENTICATION KERBEROS5 CREDENTIALS-CACHE <filename>",
8020 " Allows an alternative credentials cache to be specified. This is useful",
8021 " when you need to maintain two or more sets of credentials for different",
8022 " realms or roles. The default is specified by the environment variable",
8023 " KRB5CCNAME or as reported by the Kerberos 5 library.",
8025 "SET AUTHENTICATION KERBEROS5 FORWARDABLE { ON, OFF }",
8026 " When ON, specifies that Kerberos 5 credentials should be forwardable to",
8027 " the host. If SET TELNET AUTHENTICATION FORWARDING is ON, forwardable",
8028 " credentials are sent to the host. The default is OFF.",
8030 "SET AUTHENTICATION KERBEROS5 GET-K4-TGT { ON, OFF }",
8031 " When ON, specifies that Kerberos 4 credentials should be requested each",
8032 " time Kerberos 5 credentials are requested with AUTH KERBEROS5 INIT.",
8035 "SET AUTHENTICATION KERBEROS4 INSTANCE <instance>",
8036 " Allows a Kerberos 4 instance to be specified as a default (if needed).",
8038 "SET AUTHENTICATION { KERBEROS4, KERBEROS5 } KEYTAB <filename>",
8039 " Specifies the location of the keytab file used to authenticate incoming",
8040 " connections. The default is none, which means to use the default value",
8041 " configured in the Kerberos installation.",
8043 "SET AUTHENTICATION { KERBEROS4, KERBEROS5 } LIFETIME <minutes>",
8044 " Specifies the lifetime of the TGTs requested from the KDC. The default",
8045 " is 600 minutes (10 hours).",
8047 "SET AUTHENTICATION KERBEROS5 NO-ADDRESSES { ON, OFF }",
8048 " Specifies whether or not IP addresses will be inserted into the TGT."
8051 "SET AUTHENTICATION KERBEROS4 PREAUTH { ON, OFF }",
8052 " Allows Kerberos 4 preauthenticated TGT requests to be turned off. The",
8053 " default is ON. Only use if absolutely necessary. We recommend that",
8054 " preauthenticated requests be required for all tickets returned by a KDC",
8057 "SET AUTHENTICATION { KERBEROS4, KERBEROS5 } PRINCIPAL <name>",
8058 " When Kermit starts, it attempts to set the principal name to that stored",
8059 " in the current credentials cache. If no credential cache exists, the",
8060 " current SET LOGIN USERID value is used. SET LOGIN USERID is set to the",
8061 " operating system's current username when Kermit is started. To force",
8062 " Kermit to prompt the user for the principal name when requesting TGTs,",
8065 " SET AUTH K4 PRINCIPAL {}",
8066 " SET AUTH K5 PRINCIPAL {}",
8068 " in the Kermit initialization file or connection script.",
8070 "SET AUTHENTICATION { KERBEROS4, KERBEROS5 } PROMPT PASSWORD <prompt>",
8071 " Specifies a custom prompt to be used when prompting for a password.",
8072 " The Kerberos prompt strings may contain two %s replacement fields.",
8073 " The first %s is replaced by the principal name; the second by the realm.",
8075 "SET AUTHENTICATION { KERBEROS4, KERBEROS5 } PROMPT PRINCIPAL <prompt>",
8076 " Specifies a custom prompt to be used when prompting for the Kerberos",
8077 " principal name. No %s replacement fields may be used. Kermit prompts",
8078 " for a principal name when retrieving a TGT if the command:",
8080 " SET AUTHENTICATION { KERBEROS4, KERBEROS5 } PRINCIPAL {}",
8082 " has been issued.",
8084 "SET AUTHENTICATION KERBEROS5 PROXIABLE { ON, OFF }",
8085 " When ON, specifies that Kerberos 5 credentials should be proxiable.",
8088 "SET AUTHENTICATION KERBEROS5 RENEWABLE <minutes>",
8089 " When <minutes> is greater than the ticket lifetime a TGT may be renewed",
8090 " with AUTH K5 INIT /RENEW instead of getting a new ticket as long as the",
8091 " ticket is not expired and its within the renewable lifetime. Default is",
8092 " 0 (zero) minutes.",
8094 "SET AUTHENTICATION { KERBEROS4, KERBEROS5 } REALM <name>",
8095 " If no default is set, the default realm configured for the Kerberos",
8096 " libraries is used. Abbreviations accepted.",
8098 "SET AUTHENTICATION { KERBEROS4, KERBEROS5 } SERVICE-NAME <name>",
8099 " This command specifies the service ticket name used to authenticate",
8100 " to the host when Kermit is used as a client; or the service ticket",
8101 " name accepted by Kermit when it is acting as the host.",
8102 " If no default is set, the default service name for Kerberos 4 is",
8103 " \"rcmd\" and for Kerberos 5 is \"host\".",
8105 #endif /* CK_KERBEROS */
8107 "SET AUTHENTICATION SRP PROMPT PASSWORD <prompt>",
8108 " Specifies a custom prompt to be used when prompting for a password.",
8109 " The SRP prompt string may contain one %s replacement fields which is",
8110 " replaced by the login userid.",
8114 "In all of the following commands \"SSL\" and \"TLS\" are aliases.",
8116 "SET AUTHENTICATION { SSL, TLS } CIPHER-LIST <list of ciphers>",
8117 "Applies to both SSL and TLS. A colon separated list of any of the following",
8118 "(case sensitive) options depending on the options chosen when OpenSSL was ",
8121 " Key Exchange Algorithms:",
8122 " \"kRSA\" RSA key exchange",
8123 " \"kDHr\" Diffie-Hellman key exchange (key from RSA cert)",
8124 " \"kDHd\" Diffie-Hellman key exchange (key from DSA cert)",
8125 " \"kEDH\" Ephemeral Diffie-Hellman key exchange (temporary key)",
8126 " \"kKRB5\" Kerberos 5",
8128 " Authentication Algorithm:",
8129 " \"aNULL\" No authentication",
8130 " \"aRSA\" RSA authentication",
8131 " \"aDSS\" DSS authentication",
8132 " \"aDH\" Diffie-Hellman authentication",
8133 " \"aKRB5\" Kerberos 5",
8135 " Cipher Encoding Algorithm:",
8136 " \"eNULL\" No encodiing",
8137 " \"DES\" DES encoding",
8138 " \"3DES\" Triple DES encoding",
8139 " \"RC4\" RC4 encoding",
8140 " \"RC2\" RC2 encoding",
8141 " \"IDEA\" IDEA encoding",
8143 " MAC Digest Algorithm:",
8144 " \"MD5\" MD5 hash function",
8145 " \"SHA1\" SHA1 hash function",
8146 " \"SHA\" SHA hash function (should not be used)",
8149 " \"SSLv2\" all SSL version 2.0 ciphers (should not be used)",
8150 " \"SSLv3\" all SSL version 3.0 ciphers",
8151 " \"EXP\" all export ciphers (40-bit)",
8152 " \"EXPORT56\" all export ciphers (56-bit)",
8153 " \"LOW\" all low strength ciphers (no export)",
8154 " \"MEDIUM\" all ciphers with 128-bit encryption",
8155 " \"HIGH\" all ciphers using greater than 128-bit encryption",
8156 " \"RSA\" all ciphers using RSA key exchange",
8157 " \"DH\" all ciphers using Diffie-Hellman key exchange",
8158 " \"EDH\" all ciphers using Ephemeral Diffie-Hellman key exchange",
8159 " \"ADH\" all ciphers using Anonymous Diffie-Hellman key exchange",
8160 " \"DSS\" all ciphers using DSS authentication",
8161 " \"KRB5\" all ciphers using Kerberos 5 authentication",
8162 " \"NULL\" all ciphers using no encryption",
8164 "Each item in the list may include a prefix modifier:",
8166 " \"+\" move cipher(s) to the current location in the list",
8167 " \"-\" remove cipher(s) from the list (may be added again by",
8168 " a subsequent list entry)",
8169 " \"!\" kill cipher from the list (it may not be added again",
8170 " by a subsequent list entry)",
8172 "If no modifier is specified the entry is added to the list at the current ",
8173 "position. \"+\" may also be used to combine tags to specify entries such as "
8175 "\"RSA+RC4\" describes all ciphers that use both RSA and RC4.",
8177 "For example, all available ciphers not including ADH key exchange:",
8179 " ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP",
8181 "All algorithms including ADH and export but excluding patented algorithms: ",
8183 " HIGH:MEDIUM:LOW:EXPORT56:EXP:ADH:!kRSA:!aRSA:!RC4:!RC2:!IDEA",
8185 "The OpenSSL command ",
8187 " openssl.exe ciphers -v <list of ciphers> ",
8189 "may be used to list all of the ciphers and the order described by a specific",
8190 "<list of ciphers>.",
8192 "SET AUTHENTICATION { SSL, TLS } CRL-DIR <directory>",
8193 "specifies a directory that contains certificate revocation files where each",
8194 "file is named by the hash of the certificate that has been revoked.",
8196 " OpenSSL expects the hash symlinks to be made like this:",
8198 " ln -s crl.pem `openssl crl -hash -noout -in crl.pem`.r0",
8200 " Since not all file systems have symlinks you can use the following command",
8201 " in Kermit to copy the crl.pem file to the hash file name.",
8203 " copy crl.pem {\\fcommand(openssl.exe crl -hash -noout -in crl.pem).r0}",
8205 " This produces a hash based on the issuer field in the CRL such ",
8206 " that the issuer field of a Cert may be quickly mapped to the ",
8209 "SET AUTHENTICATION { SSL, TLS } CRL-FILE <filename>",
8210 "specifies a file that contains a list of certificate revocations.",
8212 "SET AUTHENTICATION { SSL, TLS } DEBUG { ON, OFF }",
8213 "specifies whether debug information should be displayed about the SSL/TLS",
8214 "connection. When DEBUG is ON, the VERIFY command does not terminate",
8215 "connections when set to FAIL-IF-NO-PEER-CERT when a certificate is",
8216 "presented that cannot be successfully verified. Instead each error",
8217 "is displayed but the connection automatically continues.",
8219 "SET AUTHENTICATION { SSL, TLS } DH-PARAM-FILE <filename>",
8220 " Specifies a file containing DH parameters which are used to generate",
8221 " temporary DH keys. If a DH parameter file is not provided Kermit uses a",
8222 " fixed set of parameters depending on the negotiated key length. Kermit",
8223 " provides DH parameters for key lengths of 512, 768, 1024, 1536, and 2048",
8226 "SET AUTHENTICATION { SSL, TLS } DSA-CERT-CHAIN-FILE <filename>",
8227 " Specifies a file containing a DSA certificate chain to be sent along with",
8228 " the DSA-CERT to the peer. This file must only be specified if Kermit is",
8229 " being used as a server and the DSA certificate was signed by an",
8230 " intermediary certificate authority.",
8232 "SET AUTHENTICATION { SSL, TLS } DSA-CERT-FILE <filename>",
8233 " Specifies a file containing a DSA certificate to be sent to the peer to ",
8234 " authenticate the host or end user. The file may contain the matching DH ",
8235 " private key instead of using the DSA-KEY-FILE command.",
8237 "SET AUTHENTICATION { SSL, TLS } DSA-KEY-FILE <filename>",
8238 "Specifies a file containing the private DH key that matches the DSA ",
8239 "certificate specified with DSA-CERT-FILE. This command is only necessary if",
8240 "the private key is not appended to the certificate in the file specified by",
8243 " Note: When executing a script in the background or when it is",
8244 " running as an Internet Kermit Service Daemon, Kermit cannot support ",
8245 " encrypted private keys. When attempting to load a private key that is",
8246 " encrypted, a prompt will be generated requesting the passphrase necessary",
8247 " to decrypt the keyfile. To automate access to the private key you must",
8248 " decrypt the encrypted keyfile and create an unencrypted keyfile for use",
8249 " by Kermit. This can be accomplished by using the following command and",
8252 " openssl dsa -in <encrypted-key-file> -out <unencrypted-key-file>",
8254 "SET AUTHENTICATION { SSL, TLS } RANDOM-FILE <filename>",
8255 " Specifies a file containing random data to be used as seed for the",
8256 " Pseudo Random Number Generator. The contents of the file are",
8257 " overwritten with new random data on each use.",
8259 "SET AUTHENTICATION { SSL, TLS } RSA-CERT-CHAIN-FILE <filename>",
8260 " Specifies a file containing a RSA certificate chain to be sent along with",
8261 " the RSA-CERT to the peer. This file must only be specified if Kermit is",
8262 " being used as a server and the RSA certificate was signed by an",
8263 " intermediary certificate authority.",
8265 "SET AUTHENTICATION { SSL, TLS } RSA-CERT-FILE <filename>",
8266 " Specifies a file containing a RSA certificate to be sent to the peer to ",
8267 " authenticate the host or end user. The file may contain the matching RSA ",
8268 " private key instead of using the RSA-KEY-FILE command.",
8270 "SET AUTHENTICATION { SSL, TLS } RSA-KEY-FILE <filename>",
8271 " Specifies a file containing the private RSA key that matches the RSA",
8272 " certificate specified with RSA-CERT-FILE. This command is only necessary",
8273 " if the private key is not appended to the certificate in the file specified"
8275 " by RSA-CERT-FILE. ",
8277 " Note: When executing a script in the background or when it is",
8278 " running as an Internet Kermit Service Daemon, Kermit cannot support ",
8279 " encrypted private keys. When attempting to load a private key that is",
8280 " encrypted, a prompt will be generated requesting the passphrase necessary",
8281 " to decrypt the keyfile. To automate access to the private key you must",
8282 " decrypt the encrypted keyfile and create an unencrypted keyfile for use",
8283 " by Kermit. This can be accomplished by using the following command and",
8286 " openssl rsa -in <encrypted-key-file> -out <unencrypted-key-file>",
8288 "SET AUTHENTICATION { SSL, TLS } VERBOSE { ON, OFF }",
8289 " Specifies whether information about the authentication (ie, the",
8290 " certificate chain) should be displayed upon making a connection.",
8292 "SET AUTHENTICATION { SSL, TLS } VERIFY { NO,PEER-CERT,FAIL-IF-NO-PEER-CERT }",
8293 " Specifies whether certificates should be requested from the peer verified;",
8294 " whether they should be verified when they are presented; and whether they",
8295 " should be required. When set to NO (the default for IKSD), Kermit does",
8296 " not request that the peer send a certificate; if one is presented it is",
8297 " ignored. When set to PEER-CERT (the default when not IKSD), Kermit",
8298 " requests a certificate be sent by the peer. If presented, the certificate",
8299 " is verified. Any errors during the verification process result in",
8300 " queries to the end user. When set to FAIL-IF-NO-PEER-CERT, Kermit",
8301 " requests a certificate be sent by the peer. If the certificate is not",
8302 " presented or fails to verify, the connection is terminated without",
8303 " querying the user.",
8305 " If an anonymous cipher (i.e., ADH) is desired, the NO setting must be",
8306 " used. Otherwise, the receipt of the peer certificate request is",
8307 " interpreted as a protocol error and the negotiation fails.",
8309 " If you wish to allow the peer to authenticate using either an X509",
8310 " certificate to userid mapping function or via use of a ~/.tlslogin file",
8311 " you must use either PEER-CERT or FAIL-IF-NO-PEER-CERT. Otherwise, any",
8312 " certificates that are presented is ignored. In other words, use NO if you",
8313 " want to disable the ability to use certificates to authenticate a peer.",
8315 "SET AUTHENTICATION { SSL, TLS } VERIFY-DIR <directory>",
8316 " Specifies a directory that contains root CA certificate files used to",
8317 " verify the certificate chains presented by the peer. Each file is named",
8318 " by a hash of the certificate.",
8320 " OpenSSL expects the hash symlinks to be made like this:",
8322 " ln -s cert.pem `openssl x509 -hash -noout -in cert.pem`.0",
8324 " Since not all file systems have symlinks you can use the following command",
8325 " in Kermit to copy the cert.pem file to the hash file name.",
8327 " copy cert.pem {\\fcommand(openssl.exe x509 -hash -noout -in cert.pem).0}",
8329 " This produces a hash based on the subject field in the cert such that the",
8330 " certificate may be quickly found.",
8332 "SET AUTHENTICATION { SSL, TLS } VERIFY-FILE <file>",
8333 " Specifies a file that contains root CA certificates to be used for",
8334 " verifying certificate chains.",
8340 static char *hxynet[] = {
8341 "Syntax: SET NETWORK { TYPE network-type, DIRECTORY [ file(s)... ] }",
8343 "Select the type of network to be used with SET HOST connections:",
8346 " SET NETWORK TYPE COMMAND ; Make a connection through an external command",
8349 " SET NETWORK TYPE TCP/IP ; Internet: Telnet, Rlogin, etc.",
8350 #endif /* TCPSOCKET */
8352 " SET NETWORK TYPE X.25 ; X.25 peer-to-peer connections.",
8355 " SET NETWORK TYPE PATHWORKS { LAT, CTERM } ; DEC LAT or CTERM connections.",
8358 " SET NETWORK TYPE NAMED-PIPE <pipename> ; OS/2 Named Pipe connections.",
8361 " SET NETWORK TYPE NETBIOS ; NETBIOS peer-to-peer connections",
8362 #endif /* CK_NETBIOS */
8364 " SET NETWORK TYPE SUPERLAT ; LAT connections (Meridian Technology SuperLAT)",
8365 #endif /* SUPERLAT */
8367 "If only one network type is listed above, that is the default network for",
8369 "SET HOST commands. Also see SET HOST, TELNET, RLOGIN.",
8372 "SET HOST commands. Also see SET HOST, TELNET.",
8374 "SET HOST commands. Also see SET HOST.",
8376 #endif /* RLOGCODE */
8378 "SET NETWORK DIRECTORY [ file [ file [ ... ] ] ]",
8379 " Specifies the name(s) of zero or more network directory files, similar to",
8380 " dialing directories (HELP DIAL for details). The general format of a",
8381 " network directory entry is:",
8383 " name network-type address [ network-specific-info ] [ ; comment ]",
8385 " For TCP/IP, the format is:",
8387 " name tcp/ip ip-hostname-or-address [ socket ] [ ; comment ]",
8389 "You can have multiple network directories and you can have multiple entries",
8390 "with the same name. SET HOST <name> and TELNET <name> commands look up the",
8391 "given <name> in the directory and, if found, fill in the additional items",
8392 "from the entry, and then try all matching entries until one succeeds.",
8396 static char *hxytcp[] = {
8398 "SET TCP ADDRESS <ip-address>",
8399 " This allows a specific IP Address on a multihomed host to be used",
8400 " instead of allowing the TCP/IP stack to choose. This may be necessary",
8401 " when using authentication or listening for an incoming connection.",
8402 " Specify no <ip-address> to remove the preference.",
8404 "SET TCP KEEPALIVE { ON, OFF }",
8405 " Setting this ON might help to detect broken connections more quickly.",
8406 " (default is ON.)",
8408 "SET TCP LINGER { ON [timeout], OFF }",
8409 " Setting this ON ensures that a connection doesn't close before all",
8410 " outstanding data has been transferred and acknowledged. The timeout is",
8411 " measured in 10ths of milliseconds. The default is ON with a timeout of 0.",
8413 "SET TCP NODELAY { ON, OFF }",
8414 " ON means send short TCP packets immediately rather than waiting",
8415 " to accumulate a bunch of them before transmitting (Nagle Algorithm).",
8416 " (default is OFF.)",
8418 "SET TCP RECVBUF <number>",
8419 "SET TCP SENDBUF <number>",
8420 " TCP receive and send buffer sizes. (default is -1, use system defaults.)",
8422 "These items let you tune TCP networking performance on a per-connection",
8423 "basis by adjusting parameters you normally would not have access to. You",
8424 "should use these commands only if you feel that the TCP/IP protocol stack",
8425 "that Kermit is using is giving you inadequate performance, and then only if",
8426 "you understand the concepts (see, for example, the Comer TCP/IP books), and",
8427 "then at your own risk. These settings are displayed by SHOW NETWORK. Not",
8428 "all options are necessarily available in all Kermit versions; it depends on",
8429 "the underlying TCP/IP services.",
8431 "The following TCP and/or IP parameter(s) may also be changed:",
8433 #endif /* SOL_SOCKET */
8434 "SET TCP REVERSE-DNS-LOOKUP { AUTO, ON, OFF }",
8435 " Tells Kermit whether to perform reverse DNS lookup on TCP/IP connections",
8436 " so Kermit can determine the actual hostname of the host it is connected",
8437 " to, which is useful for connections to host pools, and is required for",
8438 " Kerberos connections to host pools and for incoming connections. If the",
8439 " other host does not have a DNS entry, the reverse lookup could take a long",
8440 " time (minutes) to fail, but the connection will still be made. Turn this",
8441 " option OFF for speedier connections if you do not need to know exactly",
8442 " which host you are connected to and you are not using Kerberos. AUTO, the",
8443 " default, means the lookup is done on hostnames, but not on numeric IP",
8444 " addresses unless Kerberos support is installed.",
8447 "SET TCP DNS-SERVICE-RECORDS {ON, OFF}",
8448 " Tells Kermit whether to try to use DNS SRV records to determine the",
8449 " host and port number upon which to find an advertised service. For",
8450 " example, if a host wants regular Telnet connections redirected to some",
8451 " port other than 23, this feature allows Kermit to ask the host which",
8452 " port it should use. Since not all domain servers are set up to answer",
8453 " such requests, this feature is OFF by default.",
8454 #endif /* CK_DNS_SRV */
8458 "SET TCP SOCKS-SERVER [<hostname or ip-address>]",
8459 " If a hostname or ip-address is specified, Kermit will use the SOCKS",
8460 " server when attempting outgoing connections. If no hostname or",
8461 " ip-address is specified, any previously specified SOCKS server will",
8463 #endif /* CK_SOCKS */
8467 "SET TCP HTTP-PROXY [<hostname or ip-address>[:<port>]]",
8468 " If a hostname or ip-address is specified, Kermit will use the Proxy",
8469 " server when attempting outgoing connections. If no hostname or",
8470 " ip-address is specified, any previously specified Proxy server will",
8471 " be removed. If no port number is specified, the \"http\" service",
8475 #endif /* NOTCPOPTS */
8476 #endif /* NETCONN */
8479 static char *hxytopt[] = {
8480 "SET TELOPT [ { /CLIENT, /SERVER } ] <option> -",
8481 " { ACCEPTED, REFUSED, REQUESTED, REQUIRED } -",
8482 " [ { ACCEPTED, REFUSED, REQUESTED, REQUIRED } ]",
8483 " SET TELOPT lets you specify policy requirements for Kermit's handling of",
8484 " Telnet option negotiations. Setting an option REQUIRED causes Kermit",
8485 " to offer the option to the peer and disconnect if the option is refused.",
8486 " REQUESTED causes Kermit to offer an option to the peer. ACCEPTED results",
8487 " in no offer but Kermit will attempt to negotiate the option if it is",
8488 " requested. REFUSED instructs Kermit to refuse the option if it is",
8489 " requested by the peer.",
8491 " Some options are negotiated in two directions and accept separate policies",
8492 " for each direction; the first keyword applies to Kermit itself, the second",
8493 " applies to Kermit's Telnet partner; if the second keyword is omitted, an",
8494 " appropriate (option-specific) default is applied. You can also include a",
8495 " /CLIENT or /SERVER switch to indicate whether the given policies apply",
8496 " when Kermit is the Telnet client or the Telnet server; if no switch is",
8497 " given, the command applies to the client.",
8499 " Note that some of Kermit's Telnet partners fail to refuse options that",
8500 " they do not recognize and instead do not respond at all. In this case it",
8501 " is possible to use SET TELOPT to instruct Kermit to REFUSE the option",
8502 " before connecting to the problem host, thus skipping the problematic",
8505 " Use SHOW TELOPT to view current Telnet Option negotiation settings.",
8506 " SHOW TELNET displays current Telnet settings.",
8509 static char *hxytel[] = {
8510 "Syntax: SET TELNET parameter value",
8512 "For TCP/IP TELNET connections, which are in NVT (ASCII) mode by default:",
8514 #ifdef CK_AUTHENTICATION
8516 "SET TELNET AUTHENICATION { ACCEPTED, REFUSED, REQUESTED, REQUIRED }",
8517 " ACCEPT or REFUSE authentication bids, or actively REQUEST authentication.",
8518 " REQUIRED refuses the connection if authentication is not successfully",
8519 " negotiated. ACCEPTED by default.",
8521 #endif /* COMMENT */
8522 "SET TELNET AUTHENTICATION TYPE { AUTOMATIC, KERBEROS_IV, KERBEROS_V, ...",
8524 " ..., NTLM, SSL, SRP, NONE } [...]",
8526 " ..., SSL, SRP, NONE } [...]",
8528 " AUTOMATIC is the default. Available options can vary depending on the",
8529 " features Kermit was built to support and the operating system",
8530 " configuration; type SET TELNET AUTHENTICATION TYPE ? for a list.",
8532 " When Kermit is the Telnet client:",
8533 " AUTOMATIC allows the host to choose the preferred type of authentication."
8535 " NONE instructs Kermit to refuse all authentication methods when the",
8536 " authentication option is negotiated. A list of one or more other values",
8537 " allow a specific subset of the supported authentication methods to be",
8540 " When Kermit is the Telnet server:",
8541 " AUTOMATIC results in available authentication methods being offered",
8542 " to the telnet client in the following order:",
8545 " KERBEROS_V, KERBEROS_IV, SRP, SSL, NTLM",
8547 " KERBEROS_V, KERBEROS_IV, SRP, SSL, NTLM",
8550 " NONE results in no authentication methods being offered to the Telnet",
8551 " server when the authentication option is negotiated. The preferred",
8552 " method of disabling authentication is:",
8554 " SET TELOPT /SERVER AUTHENTICATION REFUSE",
8556 " A list of one or more authentication methods specifies the order those",
8557 " methods are to be offered to the telnet client.",
8560 " If you wish to allow NTLM authentication to be used with the Microsoft",
8561 " Windows 2000 or Services for Unix Telnet client you must specify a list",
8562 " with NTLM as the first item in the list. By default, NTLM is the last",
8563 " item in the list because it does not provide any form of data encryption.",
8567 "SET TELNET AUTHENTICATION FORWARDING { ON, OFF }",
8568 " Set this to ON to forward Kerberos V ticket-granting-tickets to the host",
8569 " after authentication is complete. OFF by default.",
8571 #endif /* CK_KERBEROS */
8572 "SET TELNET AUTHENTICATION ENCRYPT-FLAG { ANY, NONE, TELOPT }",
8573 " Use this command to specify which AUTH telopt encryption flags may be",
8574 " accepted in client mode or offered in server mode. The default is ANY.",
8576 "SET TELNET AUTHENTICATION HOW-FLAG { ANY, ONE-WAY, MUTUAL }",
8577 " Use this command to specify which AUTH telopt how flags may be",
8578 " accepted in client mode or offered in server mode. The default is ANY.",
8580 #endif /* CK_AUTHENTICATION */
8582 "SET TELNET BINARY-MODE { ACCEPTED, REFUSED, REQUESTED, REQUIRED }",
8583 " ACCEPT or REFUSE binary-mode bids, or actively REQUEST binary mode.",
8584 " REQUIRED refuses the connection if binary mode is not successfully",
8585 " negotiated in both directions. ACCEPTED by default.",
8587 #endif /* COMMENT */
8588 "SET TELNET BINARY-TRANSFER-MODE { ON, OFF }",
8589 " When ON (OFF by default) and BINARY negotiations are not REFUSED Kermit",
8590 " will attempt to negotiate BINARY mode in each direction before the start",
8591 " of each file transfer. After the transfer is complete BINARY mode will",
8592 " be restored to the pre-transfer state.",
8594 "SET TELNET BINARY-TRANSFER-MODE { ON, OFF }",
8595 " Set this command to ON if you want to force Kermit to negotiate",
8596 " Telnet Binary in both directions when performing file transfers.",
8597 " Default is OFF. Alias SET TELNET BINARY-XFER-MODE.",
8599 "SET TELNET BUG AUTH-KRB5-DES { ON, OFF }",
8600 " Default is ON. Disable this bug to enable the use of encryption types",
8601 " other than DES such as 3DES or CAST-128 when the Kerberos 5 session key",
8602 " is longer than 8 bytes.",
8604 "SET TELNET BUG BINARY-ME-MEANS-U-TOO { ON, OFF }",
8605 " Set this to ON to try to overcome TELNET binary-mode misnegotiations by",
8606 " Kermit's TELNET partner.",
8608 "SET TELNET BUG BINARY-U-MEANS-ME-TOO { ON, OFF }",
8609 " Set this to ON to try to overcome TELNET binary-mode misnegotiations by",
8610 " Kermit's TELNET partner.",
8612 "SET TELNET BUG INFINITE-LOOP-CHECK { ON, OFF }",
8613 " Set this to ON to prevent Kermit from responding to a telnet negotiation",
8614 " sequence that enters an infinite loop. The default is OFF because this",
8615 " should never occur.",
8617 "SET TELNET BUG SB-IMPLIES-WILL-DO { ON, OFF }",
8618 " Set this to ON to allow Kermit to respond to telnet sub-negotiations if",
8619 " the peer forgets to respond to WILL with DO or to DO with WILL.",
8621 "SET TELNET DEBUG { ON, OFF }",
8622 " Set this to ON to display telnet negotiations as they are sent and",
8625 "SET TELNET DELAY-SB { ON, OFF }",
8626 " When ON, telnet subnegotiation responses are delayed until after all",
8627 " authentication and encryption options are either successfully negotiated",
8628 " or refused. This ensures that private data is protected. When OFF, telnet",
8629 " subnegotiation responses are sent immediately. The default is ON.",
8631 "SET TELNET ECHO { LOCAL, REMOTE }",
8632 " Kermit's initial echoing state for TELNET connections, LOCAL by default.",
8633 " After the connection is made, TELNET negotiations determine the echoing.",
8635 #ifdef CK_ENCRYPTION
8637 "SET TELNET ENCRYPTION { ACCEPTED, REFUSED, REQUESTED, REQUIRED }",
8638 " ACCEPT or REFUSE encryption bids, or actively REQUEST encryption in both.",
8639 " directions. REQUIRED refuses the connection if encryption is not",
8640 " successfully negotiated in both directions. ACCEPTED by default.",
8642 #endif /* COMMENT */
8643 "SET TELNET ENCRYPTION TYPE { AUTOMATIC, CAST128_CFB64, CAST128_OFB64, ",
8644 " CAST5_40_CFB64, CAST5_40_OFB64, DES_CFB64, DES_OFB64, NONE }",
8645 " AUTOMATIC allows the host to choose the preferred type of encryption.",
8646 " Other values allow a specific encryption method to be specified.",
8647 " AUTOMATIC is the default. The list of options will vary depending",
8648 " on the encryption types selected at compilation time.",
8650 #endif /* CK_ENCRYPTION */
8651 #ifdef CK_ENVIRONMENT
8653 "SET TELNET ENVIRONMENT { ON, OFF, variable-name [ value ] }",
8654 " This feature lets Kermit send the values of certain environment variables",
8655 " to the other computer if it asks for them. The variable-name can be any",
8656 " of the \"well-known\" variables \"USER\", \"JOB\", \"ACCT\", \"PRINTER\",",
8657 " \"SYSTEMTYPE\", or \"DISPLAY\". Some Telnet servers, if given a USER",
8658 " value in this way, will accept it and therefore not prompt you for user",
8659 " name when you log in. The default values are taken from your environment;",
8660 " use this command to change or remove them. See RFC1572 for details. You",
8661 " may also specify OFF to disable this feature, and ON to re-enable it.",
8664 "SET TELNET ENVIRONMENT { variable-name [ value ] }",
8665 " This feature lets Kermit send the values of certain environment variables",
8666 " to the other computer if it asks for them. The variable-name can be any",
8667 " of the \"well-known\" variables \"USER\", \"JOB\", \"ACCT\", \"PRINTER\",",
8668 " \"SYSTEMTYPE\", or \"DISPLAY\". Some Telnet servers, if given a USER",
8669 " value in this way, will accept it and therefore not prompt you for user",
8670 " name when you log in. The default values are taken from your environment;",
8671 " use this command to change or remove them. See RFC1572 for details.",
8673 #endif /* COMMENT */
8674 #endif /* CK_ENVIRONMENT */
8676 "SET TELNET FORWARD-X XAUTHORITY-FILE <file>",
8677 " If your X Server requires X authentication and the location of the",
8678 " .Xauthority file is not defined by the XAUTHORITY environment variable,",
8679 " use this command to specify the location of the .Xauthority file."
8681 #endif /* CK_FORWARD_X */
8683 "SET TELNET LOCATION [ text ]",
8684 " Location string to send to the Telnet server if it asks. By default this",
8685 " is picked up from the LOCATION environment variable. Give this command",
8686 " with no text to disable this feature.",
8688 #endif /* CK_SNDLOC */
8689 "SET TELNET NEWLINE-MODE { NVT, BINARY-MODE } { OFF, ON, RAW }",
8691 " Determines how carriage returns are handled on TELNET connections. There",
8692 " are separate settings for NVT (ASCII) mode and binary mode. ON (default",
8693 " for NVT mode) means CRLF represents CR. OFF means CR followed by NUL",
8694 " represents CR. RAW (default for BINARY mode) means CR stands for itself.",
8697 "SET TELNET PROMPT-FOR-USERID <prompt>",
8698 " Specifies a custom prompt to be used when prompting for a userid. Kermit",
8699 " prompts for a userid if the command:",
8701 " SET LOGIN USERID {}",
8703 " has been issued prior to a Telnet authentication negotiation for an",
8704 " authentication type that requires the transmission of a name, such as",
8705 " Secure Remote Password.",
8707 #endif /* TCPSOCKET */
8708 "SET TELNET REMOTE-ECHO { ON, OFF }",
8709 " Applies only to incoming connections created with:",
8710 " SET HOST * <port> /TELNET",
8711 " This command determines whether Kermit will actually echo characters",
8712 " received from the remote when it has negotiated to do so. The default",
8713 " is ON. Remote echoing may be turned off when it is necessary to read",
8714 " a password with the INPUT command.",
8716 "SET TELNET TERMINAL-TYPE name",
8717 " The terminal type to send to the remote TELNET host. If none is given,",
8719 " your current SET TERMINAL TYPE value is sent, e.g. VT220.",
8722 " your local terminal type is sent.",
8725 "SET TELNET WAIT-FOR-NEGOTIATIONS { ON, OFF }",
8726 " Each Telnet option must be fully negotiated either On or Off before the",
8727 " session can continue. This is especially true with options that require",
8728 " subnegotiations such as Authentication, Encryption, and Kermit; for",
8729 " proper support of these options Kermit must wait for the negotiations to",
8730 " complete. Of course, Kermit has no way of knowing whether a reply is",
8731 " delayed or not coming at all, and so will wait a minute or more for",
8732 " required replies before continuing the session. If you know that Kermit's",
8733 " Telnet partner will not be sending the required replies, you can set this",
8734 " option of OFF to avoid the long timeouts. Or you can instruct Kermit to",
8735 " REFUSE specific options with the SET TELOPT command.",
8737 "Type SHOW TELNET to see the current values of these parameters.",
8742 static char *hxymacr[] = {
8743 "Syntax: SET MACRO parameter value",
8744 " Controls the behavior of macros.",
8746 "SET MACRO ECHO { ON, OFF }",
8747 " Tells whether commands executed from a macro definition should be",
8748 " displayed on the screen. OFF by default; use ON for debugging.",
8750 "SET MACRO ERROR { ON, OFF }",
8751 " Tells whether a macro should be automatically terminated upon a command",
8752 " error. This setting is local to the current macro, and inherited by",
8753 " subordinate macros.",
8757 static char *hmxyprm[] = {
8758 "Syntax: SET PROMPT [ text ]",
8761 "Prompt text for this program, normally 'K-95>'. May contain backslash",
8764 "Prompt text for this program, normally 'Mac-Kermit>'. May contain backslash",
8766 "Prompt text for this program, normally 'C-Kermit>'. May contain backslash",
8769 "codes for special effects. Surround by { } to preserve leading or trailing",
8771 "spaces. If text omitted, prompt reverts to K-95>. Prompt can include",
8774 "spaces. If text omitted, prompt reverts to Mac-Kermit>. Prompt can include",
8776 "spaces. If text omitted, prompt reverts to C-Kermit>. Prompt can include",
8779 "variables like \\v(dir) or \\v(time) to show current directory or time.",
8783 static char *hxywild[] = {
8784 "Syntax: SET WILDCARD-EXPANSION { KERMIT [ switch ], SHELL }",
8785 " KERMIT (the default) means C-Kermit expands filename wildcards in SEND and",
8786 " similar commands itself, and in incoming GET commands. Optional switches",
8787 " are /NO-MATCH-DOT-FILES (\"*\" and \"?\" should not match in initial",
8788 " period in a filename; this is the default) and /MATCH-DOT-FILES if you",
8789 " want files whose names begin with \".\" included. SET WILDCARD SHELL",
8790 " means that Kermit asks your preferred shell to expand wildcards (this",
8791 " should not be necessary in C-Kermit 7.0 and later). HELP WILDCARD for",
8792 " further information.",
8797 static char *hxywind[] = {
8798 "Syntax: SET WINDOW-SIZE number",
8799 " Specifies number of slots for sliding windows, i.e. the number of packets",
8800 " that can be transmitted before waiting for acknowledgement. The default",
8802 " for Kermit protocol is one, the maximum is 32; for ZMODEM, the default",
8803 " is no windowing (0). For ZMODEM, the window size is really the packet",
8804 " length, and is used only when non-windowed (streaming) transfers fail; the",
8805 " ZMODEM window size should be a largish number, like 1024, and it should be",
8806 " a multiple of 64.",
8808 " is one, the maximum is 32. Increased window size might result in reduced",
8809 " maximum packet length. Use sliding windows for improved efficiency on",
8810 " connections with long delays. A full duplex connection is required, as",
8811 " well as a cooperating Kermit on the other end.",
8812 #endif /* XYZ_INTERNAL */
8815 static char *hxyrpt[] = {
8816 "Syntax: SET REPEAT { COUNTS { ON, OFF }, PREFIX <code> }",
8817 " SET REPEAT COUNTS turns the repeat-count compression mechanism ON and OFF.",
8818 " The default is ON. SET REPEAT PREFIX <code> sets the repeat-count prefix",
8819 " character to the given code. The default is 126 (tilde).",
8822 static char *hxyrcv[] = {
8823 "Syntax: SET RECEIVE parameter value",
8824 " Specifies parameters for inbound packets:",
8827 "SET RECEIVE CHARACTER-SET { AUTOMATIC, MANUAL }",
8828 " Whether to automatically switch to an appropriate file-character set based",
8829 " on the transfer character-set announcer, if any, of an incoming text file.",
8830 " AUTOMATIC by default. Also see HELP ASSOCIATE.",
8832 #endif /* NOCSETS */
8833 "SET RECEIVE CONTROL-PREFIX number",
8834 " ASCII value of prefix character used for quoting control characters in",
8835 " packets that Kermit receives, normally 35 (number sign). Don't change",
8836 " this unless something is wrong with the other Kermit program.",
8838 "SET RECEIVE END-OF-PACKET number",
8839 " ASCII value of control character that terminates incoming packets,",
8840 " normally 13 (carriage return).",
8843 "SET RECEIVE IGNORE-CHARACTER number",
8844 " ASCII value of character to be discarded when receiving packets, such as",
8845 " line folding characters.",
8847 #endif /* CKXXCHAR */
8848 "SET RECEIVE MOVE-TO [ directory ]",
8849 " If a directory name is specified, then every file that is received",
8850 " successfully is moved to the given directory immediately after reception",
8851 " is complete. Omit the directory name to remove any previously set move-to",
8854 "SET RECEIVE PACKET-LENGTH number",
8855 " Maximum length packet the other Kermit should send.",
8857 "SET RECEIVE PADDING number",
8858 " Number of prepacket padding characters to ask for (normally 0).",
8860 "SET RECEIVE PAD-CHARACTER number",
8861 " ASCII value of control character to use for padding (normally 0).",
8863 "SET RECEIVE PATHNAMES {OFF, ABSOLUTE, RELATIVE, AUTO}",
8864 " If a recognizable path (directory, device) specification appears in an",
8865 " incoming filename, strip it OFF before trying to create the output file.",
8867 " Otherwise, then if any of the directories in the path don't exist, Kermit",
8868 " tries to create them, relative to your current or download directory, or",
8869 " absolutely, as specified. RELATIVE means force all incoming names, even",
8870 " if they are absolute, to be relative to your current or download directory."
8872 " AUTO, which is the default, means RELATIVE if the file sender indicates in",
8873 " advance that this is a recursive transfer, otherwise OFF.",
8874 #endif /* CK_MKDIR */
8876 "SET RECEIVE PAUSE number",
8877 " Milliseconds to pause between packets, normally 0.",
8881 "SET RECEIVE PERMISSIONS { ON, OFF }",
8882 " Whether to copy file permissions from inbound Attribute packets.",
8884 #endif /* CK_PERMS */
8886 "SET RECEIVE RENAME-TO [ template ]",
8887 " If a template is specified, then every file that is received successfully",
8889 is renamed according to the given template immediately after it is received.",
8891 The template should include variables like \\v(filename) or \\v(filenumber).",
8892 " Omit the template to remove any template previously set.",
8894 "SET RECEIVE START-OF-PACKET number",
8895 " ASCII value of character that marks start of inbound packet.",
8897 "SET RECEIVE TIMEOUT number",
8898 " Number of seconds the other Kermit should wait for a packet before sending",
8899 " a NAK or retransmitting.",
8902 "SET RECEIVE VERSION-NUMBERS { ON, OFF }",
8903 " If ON, and in incoming filename includes a VMS version number, use it when",
8904 " creating the file. If OFF (which is the default), strip any VMS version",
8905 " number from incoming filenames before attempting to create the file, \
8907 " the new file to receive the next highest version number.",
8911 static char *hxysnd[] = {
8912 "Syntax: SET SEND parameter value",
8913 " Specifies parameters for outbound files or packets.",
8915 "SET SEND BACKUP { ON, OFF }",
8916 " Tells whether to include backup files when sending file groups. Backup",
8917 " files are those created by Kermit, EMACS, etc, when creating a new file",
8918 " that has the same name as an existing file. A backup file has a version",
8919 " appended to its name, e.g. oofa.txt.~23~. ON is the default, meaning",
8920 " don't exclude backup files. Use OFF to exclude backup files from group",
8924 "SET SEND CHARACTER-SET { AUTOMATIC, MANUAL }",
8925 " Whether to automatically switch to an appropriate file-character when a",
8926 " SET TRANSFER CHARACTER-SET command is given, or vice versa. AUTOMATIC by",
8927 " default. Also see HELP ASSOCIATE.",
8929 #endif /* NOCSETS */
8931 "SET SEND CONTROL-PREFIX number",
8932 " ASCII value of prefix character used for quoting control characters in",
8933 " packets that Kermit sends, normally 35 (number sign).",
8936 "SET SEND DOUBLE-CHARACTER number",
8937 " ASCII value of character to be doubled when sending packets, such as an",
8938 " X.25 PAD escape character.",
8940 #endif /* CKXXCHAR */
8941 "SET SEND END-OF-PACKET number",
8942 " ASCII value of control character to terminate an outbound packet,",
8943 " normally 13 (carriage return).",
8945 "SET SEND MOVE-TO [ directory ]",
8947 If a directory name is specified, then every file that is sent successfully",
8948 " is moved to the given directory immediately after it is sent.",
8949 " Omit the directory name to remove any previously set move-to directory.",
8951 "SET SEND PACKET-LENGTH number",
8952 " Maximum length packet to send, even if other Kermit asks for longer ones.",
8953 " This command can not be used to force packets to be sent that are longer",
8954 " than the length requested by the receiver. Use this command only to",
8955 " force shorter ones.",
8957 "SET SEND PADDING number",
8958 " Number of prepacket padding characters to send.",
8960 "SET SEND PAD-CHARACTER number",
8961 " ASCII value of control character to use for padding.",
8963 "SET SEND PATHNAMES {OFF, ABSOLUTE, RELATIVE}",
8964 " Include the path (device, directory) portion with the file name when",
8965 " sending it as specified; ABSOLUTE means to send the whole pathname,",
8966 " RELATIVE means to include the pathname relative to the current directory.",
8967 " Applies to the actual filename, not to the \"as-name\". The default is",
8970 "SET SEND PAUSE number",
8971 " Milliseconds to pause between packets, normally 0.",
8975 "SET SEND PERMISSIONS { ON, OFF }",
8976 " Whether to include file permissions in outbound Attribute packets.",
8978 #endif /* CK_PERMS */
8980 "SET SEND RENAME-TO [ template ]",
8981 " If a template is specified, then every file that is sent successfully",
8982 " is renamed according to the given template immediately after it is sent.",
8984 The template should include variables like \\v(filename) or \\v(filenumber).",
8985 " Omit the template to remove any template previously set.",
8987 "SET SEND START-OF-PACKET number",
8988 " ASCII value of character to mark start of outbound packet.",
8991 "SET SEND TIMEOUT number [ { DYNAMIC [ min max ] ], FIXED } ]",
8993 "SET SEND TIMEOUT number",
8994 #endif /* CK_TIMERS */
8996 " Number of seconds to wait for a packet before sending NAK or",
8998 " retransmitting. Include the word DYNAMIC after the number in the",
8999 " SET SEND TIMEOUT command to have Kermit compute the timeouts dynamically",
9000 " throughout the transfer based on the packet rate. Include the word FIXED",
9001 " to use the \"number\" given throughout the transfer. DYNAMIC is the",
9002 " default. After DYNAMIC you may include minimum and maximum values.",
9005 #endif /* CK_TIMERS */
9008 "SET SEND VERSION-NUMBERS { ON, OFF }",
9009 " If ON, include VMS version numbers in outbound filenames. If OFF (which",
9010 " is the default), strip version numbers.",
9014 static char *hxyxfer[] = {
9015 "Syntax: SET TRANSFER (or XFER) paramater value",
9019 "SET TRANSFER BELL { OFF, ON }",
9020 " Whether to ring the terminal bell at the end of a file transfer.",
9023 "SET TRANSFER CANCELLATION { OFF, ON [ <code> [ <number> ] ] }",
9024 " OFF disables remote-mode packet-mode cancellation from the keyboard.",
9025 " ON enables it. The optional <code> is the control character to use for",
9026 " cancellation; the optional <number> is how many consecutive occurrences",
9027 " of the given control character are required for cancellation.",
9030 "SET TRANSFER INTERRUPTION { ON, OFF }",
9031 " TRANSFER INTERRUPTION is normally ON, allowing for interruption of a file",
9032 " transfer in progress by typing certain characters while the file-transfer",
9033 " display is active. SET TRANSFER INTERRUPTION OFF disables interruption",
9034 " of file transfer from the keyboard in local mode.",
9037 "SET TRANSFER CRC-CALCULATION { OFF, ON }",
9038 " Tells whether Kermit should accumulate a Cyclic Redundancy Check for ",
9039 " each file transfer. Normally ON, in which case the CRC value is available",
9040 " in the \\v(crc16) variable after the transfer. Adds some overhead. Use",
9041 " SET TRANSFER CRC OFF to disable.",
9045 "SET TRANSFER CHARACTER-SET name",
9046 " Selects the character set used to represent textual data in Kermit",
9047 " packets. Text characters are translated to/from the FILE CHARACTER-SET.",
9050 " TRANSPARENT (no translation, the default)",
9052 " LATIN1 (ISO 8859-1 Latin Alphabet 1)",
9054 " LATIN2 (ISO 8859-2 Latin Alphabet 2)",
9055 #endif /* NOLATIN2 */
9056 " LATIN9 (ISO 8859-15 Latin Alphabet 9)",
9058 " CYRILLIC-ISO (ISO 8859-5 Latin/Cyrillic)",
9059 #endif /* CYRILLIC */
9061 " GREEK-ISO (ISO 8859-7 Latin/Greek)",
9064 " HEBREW-ISO (ISO 8859-8 Latin/Hebrew)",
9067 " JAPANESE-EUC (JIS X 0208 Kanji + Roman and Katakana)",
9070 " UCS-2 (ISO 10646 / Unicode 2-byte form)",
9071 " UTF-8 (ISO 10646 / Unicode 8-bit serialized transformation format)",
9072 #endif /* UNICODE */
9074 "SET TRANSFER TRANSLATION { ON, OFF }",
9075 " Enables and disables file-transfer character-set translation. It's",
9076 " enabled by default.",
9077 #endif /* NOCSETS */
9080 "SET TRANSFER DISPLAY { BRIEF, CRT, FULLSCREEN, NONE, SERIAL }",
9082 "SET TRANSFER DISPLAY { BRIEF, CRT, NONE, SERIAL }",
9083 #endif /* CK_CURSES */
9084 " Choose the desired format for the progress report to be displayed on",
9085 " your screen during file transfers when Kermit is in local mode.",
9087 " FULLSCREEN requires your terminal type be set correctly; the others",
9088 " are independent of terminal type.",
9091 #endif /* CK_CURSES */
9093 "SET TRANSFER LOCKING-SHIFT { OFF, ON, FORCED }",
9094 " Tell whether locking-shift protocol should be used during file transfer",
9095 " to achieve 8-bit transparency on a 7-bit connection. ON means to request",
9096 " its use if PARITY is not NONE and to use it if the other Kermit agrees,",
9097 " OFF means not to use it, FORCED means to use it even if the other Kermit",
9100 "SET TRANSFER MODE { AUTOMATIC, MANUAL }",
9101 " Automatic (the default) means Kermit should automatically go into binary",
9102 " file-transfer mode and use literal filenames if the other Kermit says it",
9103 " has a compatible file system, e.g. UNIX-to-UNIX, but not UNIX-to-DOS.",
9105 " Also, when sending files, Kermit should switch between binary and text",
9106 " mode automatically per file based on the SET FILE BINARY-PATTERNS and SET",
9107 " FILE TEXT-PATTERNS.",
9108 #endif /* PATTERNS */
9111 "SET TRANSFER PIPES { ON, OFF }",
9112 " Enables/Disables automatic sending from / reception to command pipes when",
9113 " the incoming filename starts with '!'. Also see CSEND, CRECEIVE.",
9115 #endif /* PIPESEND */
9117 "SET TRANSFER PROTOCOL { KERMIT, XMODEM, ... }",
9118 " Synonym for SET PROTOCOL (q.v.).",
9121 "SET TRANSFER REPORT { ON, OFF }",
9122 " Enables/Disables the automatic post-transfer message telling what files",
9123 " went where from C-Kermit when it is in remote mode. ON by default.",
9125 "SET TRANSFER SLOW-START { OFF, ON }",
9126 " ON (the default) tells Kermit, when sending files, to gradually build up",
9127 " the packet length to the maximum negotiated length. OFF means start",
9128 " sending the maximum length right away.",
9130 "Synonym: SET XFER. Use SHOW TRANSFER (XFER) to see SET TRANSFER values.",
9135 static char *hxywin95[] = {
9136 "SET WIN95 8.3-FILENAMES { ON, OFF }",
9137 " Instructs K-95 to report all filenames using 8.3 notation instead of the",
9138 " normal long filenames. Default is OFF",
9140 "SET WIN95 ALT-GR { ON, OFF }",
9141 " Instructs K-95, when used on MS Windows 95, to interpret the Right Alt key",
9142 " as the Alt-Gr key. This is necessary to work around the failure of",
9143 " Windows 95 to properly translate non-US keyboards. Default is OFF.",
9145 "SET WIN95 KEYBOARD-TRANSLATION <character-set>",
9146 " Specifies the character-set that Windows 95 is using to send keystrokes",
9147 " to Kermit-95 via the keyboard input functions. Default is Latin1-ISO.",
9149 "SET WIN95 OVERLAPPED-IO { ON <requests>, OFF }",
9150 " Determines whether or not K-95 uses Overlapped-I/O methods for reading",
9151 " from and writing to serial and TAPI communication devices. <requests>",
9152 " specifies the maximum number of simultaneous write requests that may be",
9153 " overlapped, from 1 to 30. Default is ON.",
9155 "SET WIN95 POPUPS { ON, OFF }",
9156 " Determines whether or not Kermit 95 uses Popups to query the user for",
9157 " necessary information such as user IDs or passwords. Default is ON.",
9159 "SET WIN95 SELECT-BUG { ON, OFF }"
9160 " Some TCP/IP (Winsock) implementations for Windows have a defective",
9161 " select() function. Use this command to avoid the use of select() if",
9162 " K95 appears to be unable to send data over TCP/IP. Default is OFF.",
9166 static char *hmxybel[] = {
9168 "Syntax: SET BELL { AUDIBLE [ { BEEP, SYSTEM-SOUNDS } ], VISIBLE, NONE }",
9169 " Specifies how incoming Ctrl-G (bell) characters are handled in CONNECT",
9170 " mode and how command warnings are presented in command mode. AUDIBLE",
9171 " means either a beep or a system-sound is generated; VISIBLE means the",
9172 " screen is flashed momentarily.",
9174 "Syntax: SET BELL { OFF, ON }",
9175 " ON (the default) enables ringing of the terminal bell (beep) except where",
9176 " it is disabled in certain circumstances, e.g. by SET TRANSFER BELL. OFF",
9177 " disables ringing of the bell in all circumstances, overriding any specific",
9178 " SET xxx BELL selections.",
9182 static char *hmxycd[] = {
9183 "Syntax: SET CD { HOME <path>, PATH <path>, MESSAGE { ON, OFF, FILE <list> } }"
9186 "SET CD HOME <path>",
9187 " Specified which directory to change to if CD or KCD is given without a",
9188 " pathname. If this command is not given, your login or HOME directory is",
9191 "SET CD PATH <path>",
9192 " Overrides normal CDPATH environment variable, which tells the CD command",
9193 " where to look for directories to CD to if you don't specify them fully.",
9197 " set cd path :directory:directory:...",
9199 " in other words, a list of directories separated by colons, with a colon",
9200 " at the beginning, e.g.:",
9202 " set cd path :/usr/olga:/usr/ivan/public:/tmp",
9205 " set cd path disk:directory;disk:directory;...",
9207 " just like the DOS PATH; in other words, a list of disk:directory names",
9208 " separated by semicolons, e.g.:",
9210 " SET CD PATH C:\\K95;C:\\HOME;C:\\LOCAL;C:\\",
9213 " set cd path directory,directory,...",
9215 " in other words, a list of directory specifications or logical names that",
9216 " represent them, e.g.:",
9218 " SET CD PATH SYS$LOGIN:,$DISK1:[OLGA],$DISK2[SCRATCH.IVAN].",
9220 " (unknown for this platform)",
9223 #endif /* UNIXOROSK */
9225 "SET CD MESSAGE { ON, OFF }",
9226 " Default is OFF. When ON, this tells Kermit to look for a file with a",
9227 " certain name in any directory that you CD to, and if it finds one, to",
9228 " display it on your screen when you give the CD command. The filename,",
9229 " or list of names, is given in the SET CD MESSAGE FILE command.",
9231 "SET CD MESSAGE FILE name",
9233 "SET CD MESSAGE FILE {{name1}{name2}...{name8}}",
9234 " Specify up to 8 filenames to look for when when CDing to a new directory",
9235 " and CD MESSAGE is ON. The first one found, if any, in the new directory",
9239 " is displayed. The default list is:",
9242 " {{./.readme}{README.TXT}{READ.ME}}",
9244 " {{README.TXT}{READ.ME}}",
9245 #endif /* UNIXOROSK */
9247 #endif /* DFCDMSG */
9249 "Synonym: SET SERVER CD-MESSAGE FILE.",
9250 #endif /* NOSERVER */
9252 "Type SHOW CD to view current CD settings. Also see HELP SET SERVER.",
9257 static char * hsetiks[] = {
9259 "SET IKS ANONYMOUS ACCOUNT <username>",
9260 " On Windows NT/2000 this is the account that will be used to allow",
9261 " anonymous access to the system. This account MUST have no password",
9262 " and its privileges should be restricted to only allow those operations",
9263 " which should be permitted to unknown users. In practice this means",
9264 " List Directories and Read-Execute privileges only. If a directory",
9265 " is configured for Write privileges then Read privileges should be",
9266 " denied for that directory. Otherwise, your system will become used",
9267 " by software pirates. If this command is not specified in the IKSD.KSC",
9268 " file the username \"GUEST\" is used by default. This command has no",
9269 " effect on Windows 95/98.",
9272 "SET IKS ANONYMOUS INITFILE filename",
9274 " The initialization file to be executed for anonymous logins. By default",
9275 " it is K95.INI in the home directory associated with the ANNONYMOUS account."
9277 " Any filename that you specify here must be readable by the ANONYMOUS",
9278 " account and if a SET IKS ANONYMOUS ROOT command was given, exist within",
9279 " the restricted directory tree. This option is independent of the SET IKS",
9280 " INITFILE command which applies only to real users.",
9282 " The initialization file to be executed for anonymous logins. By default",
9283 " it is .kermrc in the anonymous root directory. This option is independent",
9284 " of the SET IKS INITFILE command which applies only to real users.",
9287 "SET IKS ANONYMOUS LOGIN { ON, OFF }",
9289 " Whether anonymous logins are allowed. By default they are NOT allowed,",
9290 " so this option need be included only to allow them (or for clarity, to",
9291 " emphasize that they are not allowed). Anonymous login occurs when the",
9292 " username \"anonymous\" is specified with any password (as with ftpd).",
9293 " In order for anonymous logins to succeed on Windows NT/2000, the",
9294 " ANONYMOUS account must be enabled.",
9296 " On Windows NT and 2000, anonymous users have the same access rights as",
9297 " the ANONYMOUS account. In Windows 95/98, anonymous users, just like any",
9298 " other users, have full access rights to your entire PC, since Windows 95",
9299 " and 98 include no security features. For this reason, if you are allowing",
9300 " anonymous logins, be sure to also SET an IKS ANONYMOUS ROOT directory to",
9301 " restrict anonymous users' file access.",
9303 " Anonymous user permissions may be restricted via the specification of ",
9304 " DISABLE commands in the ANONYMOUS initfile. Anonymous users are not ",
9305 " permitted to execute an ENABLE command. Anonymous users are also prevented"
9307 " from SHOWing sensitive data about the operating system or the IKS",
9310 " Whether anonymous logins are allowed. By default they are allowed, so this",
9311 " option need be included only to disallow them (or for clarity, to emphasize"
9313 " they are allowed). Anonymous login occurs when the username \"anonymous\"",
9314 " or \"ftp\" is given, with any password (as with ftpd).",
9317 "SET IKS ANONYMOUS ROOT <directory>",
9318 " Specifies a directory tree to which anonymous users are restricted after",
9321 "SET IKS BANNERFILE <filename>",
9322 " The name of a file containing a message to be printed after the user logs",
9323 " in, in place of the normal message (copyright notice, \"Type HELP or ? for",
9326 "SET IKS CDFILE <filelist>",
9327 " When cdmessage is on, this is the name of the \"read me\" file to be shown."
9329 " Normally you would specify a relative (not absolute) name, since the file",
9330 " is opened using the literal name you specified, after changing to the new",
9331 " directory. Example:",
9333 " SET IKS CDFILE READ.ME",
9335 " You can also give a list of up to 8 filenames by (a) enclosing each",
9336 " filename in braces, and (b) enclosing the entire list in braces. Example:",
9338 " SET IKS CDFILE {{READ.ME}{aareadme.txt}{README}{read-this-first}}",
9340 " When a list is given, it is searched from left to right and the first",
9341 " file found is displayed.",
9343 "SET IKS CDMESSAGE {ON, OFF, 0, 1, 2}",
9344 " For use in the Server-Side Server configuration; whenever the client",
9345 " tells the server to change directory, the server sends the contents of a",
9346 " \"read me\" file to the client's screen. This feature is ON by default,",
9347 " and operates in client/server mode only when ON or 1. If set to 2 or",
9348 " higher, it also operates when the CD command is given at the IKSD> prompt.",
9349 " Synonym: SET IKS CDMSG.",
9351 "SET IKS DATABASE { ON, OFF }",
9352 " This command determines whether entries are inserted into the SET IKS",
9353 " DBFILE (IKSD active sessions database).",
9355 "SET IKS DBFILE <filename>",
9356 " Specifies the file which should be used for storing runtime status",
9358 " information about active connections. The default is a file called",
9359 " \"iksd.db\" in the WINDOWS directory.",
9362 " information about active connections. The default is a file called",
9363 " \"iksd.db\" in the /var/log directory.",
9365 " information about active connections.",
9370 "SET IKS DEFAULT-DOMAIN <domain-name>",
9371 " A userid on Windows is of the form DOMAIN\\\\userid. This command",
9372 " determines which domain will be searched for the userid if a domain",
9373 " is not specified by the user. On Windows 95/98 when User-level",
9374 " access is activated in the Network Control Panel, the default ",
9375 " domain will be automatically set. If the default domain is not",
9376 " specified, accounts on the local machine will take precedence over",
9377 " accounts in Domains to which the local machine belongs.",
9380 "SET IKS HELPFILE <filename>",
9381 " Specifies the name of a file to be displayed if the user types HELP",
9382 " (not followed by a specific command or topic), in place of the built-in",
9383 " top-level help text. The file need not fit on one screen; more-prompting",
9384 " is used if the file is more than one screen long if COMMAND MORE-PROMPTING",
9385 " is ON, as it is by default.",
9387 "SET IKS INITFILE <filename>",
9388 " Execute <filename> rather than the normal initialization file for real",
9389 " users; this option does not apply to anonymous users.",
9391 "SET IKS NO-INITFILE { ON, OFF }",
9392 " Do not execute an initialization file, even if a real user is logging in.",
9394 "SET IKS SERVER-ONLY { ON, OFF }",
9395 " If this option is included on the IKSD command line, the Client Side Server"
9397 " configuration is disabled, and the user will not get a Username: or",
9398 " Password: prompt, and will not be able to access the IKSD command prompt.",
9399 " A FINISH command sent to the IKSD will log it out and close the",
9400 " connection, rather than returning it to its prompt.",
9402 "SET IKS TIMEOUT <number>",
9403 " This sets a limit (in seconds) on the amount of time the client has to log",
9404 " in once the connection is made. If successful login does not occur within",
9405 " the given number of seconds, the connection is closed. The default timeout"
9407 " is 300 seconds (5 minutes). A value of 0 or less indicates there is to be",
9410 "SET IKS USERFILE <filename>",
9412 " This file contains a list of local usernames that are to be denied access",
9413 " to Internet Kermit Service. The default is /etc/ftpusers. This can be the"
9415 " same file that is used by wuftpd, and the syntax is the same: one username",
9416 " per line; lines starting with \"#\" are ignored. Use this option to",
9417 " specify the name of a different forbidden-user file, or use",
9418 " \"set iks userfile /dev/null\" to disable this feature in case there is a",
9419 " /etc/ftpusers file but you don't want to use it.",
9421 " This file contains a list of local usernames that are to be denied access",
9422 " to Internet Kermit Service. The syntax is: one username per line; lines",
9423 " starting with \"#\" are ignored.",
9426 "SET IKS XFERLOG { ON, OFF }",
9428 " Whether a file-transfer log should be kept. Off by default. If \"on\",",
9429 " but no SET IKSD XFERFILE command is given, /var/log/iksd.log is used.",
9431 " Whether a file-transfer log should be kept. Off by default.",
9434 "SET IKS XFERFILE <filename>",
9435 " Use this option to specify an iksd log file name. If you include this",
9436 " option, it implies SET IKS XFERFILE ON.",
9441 /* D O H S E T -- Give help for SET command */
9444 dohset(xx) int xx; {
9447 if (xx == -3) return(hmsga(hmhset));
9448 if (xx < 0) return(xx);
9452 return(dosetftphlp());
9454 return(hmsga(hmxygpr));
9457 if ((x = cmcfm()) < 0) return(x);
9461 return(hmsga(hsetiks));
9465 return(hmsga(hsetat));
9468 return(hmsga(hsetbkg));
9471 return(hmsga(hmxybel));
9475 return(hmsg("SET PRIORITY { REGULAR, FOREGROUND-SERVER, TIME-CRITICAL }\n\
9476 Specifies at which priority level the communication and screen update\n\
9477 threads should operate. The default value is FOREGROUND-SERVER."));
9482 return(hmsga(hsetbuf));
9483 #endif /* DYNAMIC */
9487 return(hmsga(hsetcar));
9488 #endif /* NOLOCAL */
9492 return(hmsg("Syntax: SET CASE { ON, OFF }\n\
9493 Tells whether alphabetic case is significant in string comparisons\n\
9494 done by INPUT, IF, and other commands. This setting is local to the\n\
9495 current macro or command file, and inherited by subordinates."));
9500 return(hmsga(hsetcmd));
9503 return(hmsg("Syntax: SET INCOMPLETE { DISCARD, KEEP }\n\
9504 Whether to discard or keep incompletely received files, default is KEEP."));
9508 return(hmsga(hxyinp));
9512 return(hmsga(hmxychkt));
9516 return(hmsg("Syntax: SET COUNT number\n\
9517 Example: SET COUNT 5\n\
9518 Set up a loop counter, for use with IF COUNT. Local to current macro\n\
9519 or command file, inherited by subordinate macros and command files."));
9523 return(hmsga(hmxydeb));
9526 return(hmsg("Syntax: SET DEFAULT directory\n\
9527 Change directory. Equivalent to CD command."));
9530 return(hmsg("Syntax: SET DELAY number\n\
9531 Number of seconds to wait before sending first packet after SEND command."));
9535 return(hmsga(hmxydial));
9540 return(hmsg("Syntax: SET SUSPEND { OFF, ON }\n\
9541 Disables SUSPEND command, suspend signals, and <esc-char>Z during CONNECT.")
9547 return(hmsg("Syntax: SET SCRIPT ECHO { OFF, ON }\n\
9548 Disables/Enables echoing of SCRIPT command operation."));
9549 #endif /* NOSCRIPT */
9552 return(hmsga(hxytak));
9556 return(hmsga(hxyterm));
9559 return(hmsg("Syntax: SET DUPLEX { FULL, HALF }\n\
9560 During CONNECT: FULL means remote host echoes, HALF means Kermit\n\
9561 does its own echoing."));
9564 return(hmsg("Syntax: SET LOCAL-ECHO { OFF, ON }\n\
9565 During CONNECT: OFF means remote host echoes, ON means Kermit\n\
9566 does its own echoing. Synonym for SET DUPLEX { FULL, HALF }."));
9569 return(hmsga(hxyesc)); /* SET ESCAPE */
9570 #endif /* NOLOCAL */
9572 case XYPRTR: /* SET PRINTER */
9573 return(hmsga(hxyprtr));
9577 case XYBDCP: /* SET BPRINTER */
9578 return(hmsga(hxybprtr));
9583 return(hmsga(hxyexit));
9586 return(hmsga(hmxyf));
9589 return(hmsga(hmxyflo));
9592 return(hmsga(hmxyhsh));
9597 return(hmsga(hxyhost));
9600 return(hmsga(hxynet));
9605 return(hmsga(hxytcp));
9606 #endif /* SOL_SOCKET */
9607 #endif /* NOTCPOPTS */
9611 return(hmsga(hxyx25));
9615 return(hmsg("Syntax: SET PAD name value\n\
9616 Set a PAD X.3 parameter with a desired value."));
9619 #endif /* NETCONN */
9623 return(hmsga(hxyout));
9627 case XYKEY: /* SET KEY */
9628 return(hmsga(hmhskey));
9629 #endif /* NOSETKEY */
9633 return(hmsg("Syntax: SET LANGUAGE name\n\
9634 Selects language-specific translation rules for text-mode file transfers.\n\
9635 Used with SET FILE CHARACTER-SET and SET TRANSFER CHARACTER-SET when one\n\
9636 of these is ASCII."));
9637 #endif /* NOCSETS */
9640 printf("\nSyntax: SET LINE (or SET PORT) [ switches ] [ devicename ]\n\
9641 Selects a serial-port device to use for making connections.\n");
9646 " You may access communication ports by the traditional \"DOS\" port name\n");
9648 " (e.g. SET PORT COM1) or by the Microsoft Telephony modem name from the\n");
9650 " Modems folder of the Control Panel (e.g. SET PORT TAPI). If one method\n");
9651 printf(" doesn't work, try the other.\n\n");
9654 printf(" Typical device name for this platform: %s.\n",ttgtpn());
9655 printf(" The default device name is %s (i.e. none).\n",dftty);
9658 " If you do not give a SET LINE command or if you give a SET LINE command\n");
9660 " with no device name, or if you specify %s as the device name,\n",dftty);
9662 " Kermit will be in \"remote mode\", suitable for use on the far end of a\n");
9664 " connection, e.g. as the file-transfer partner of your desktop communication\
9667 " software. If you SET LINE to a specific device other than %s,\n", dftty);
9669 " Kermit is in \"local mode\", suitable for making a connection to another\n"
9672 " computer. SET LINE alone resets Kermit to remote mode.\n");
9676 " To use a modem to dial out, first SET MODEM TYPE (e.g., to USR), then\n");
9679 " SET PORT COMx (or SET PORT TAPI), SET SPEED, then give a DIAL command.\n");
9681 " SET LINE xxx, then SET SPEED, then give a DIAL command.\n");
9685 " For direct null-modem connections use SET MODEM TYPE NONE, SET PORT COMx,\n"
9687 " For direct null-modem connections, use SET MODEM TYPE NONE, SET LINE xxx,\n"
9691 " then SET FLOW, SET SPEED, and CONNECT.\n");
9693 "\nOptional switches:\n\
9694 /CONNECT - Enter CONNECT mode automatically if SET LINE succeeds.\n");
9696 " /SERVER - Enter server mode automatically if SET LINE succeeds.\n");
9699 " /SHARE - Open the device in shared mode.\n");
9701 " /NOSHARE - Open the device in exclusive mode.\n");
9705 "Also see HELP SET MODEM, HELP SET DIAL, HELP SET SPEED, HELP SET FLOW.\n");
9710 return(hmsga(hxymacr));
9715 return(hmsga(hxymodm));
9719 return(hmsga(hxypari));
9722 return(hmsga(hmxyprm));
9725 return(hmsg("Syntax: SET QUIET {ON, OFF}\n\
9726 Normally OFF. ON disables most information messages during interactive\n\
9731 return(hmsga(hmxyqctl));
9732 #endif /* CK_SPEED */
9735 return(hmsg("Syntax: SET RETRY number\n\
9736 In Kermit protocol file transfers: How many times to retransmit a\n\
9737 particular packet before giving up; 0 = no limit."));
9743 "Syntax: SET SESSION-LOG { BINARY, DEBUG, TEXT, TIMESTAMPED-TEXT }\n\
9744 If BINARY, record all CONNECT characters in session log. If TEXT, strip\n\
9745 out CR, NUL, and XON/XOFF characters. DEBUG is the same as BINARY but\n\
9746 also includes Telnet negotiations on TCP/IP connections."));
9750 "Syntax: SET SESSION-LOG { BINARY, DEBUG, TEXT, TIMESTAMPED-TEXT }\n\
9751 If BINARY, record all CONNECT characters in session log. If TEXT, strip\n\
9752 out CR, NUL, and XON/XOFF characters. DEBUG is the same as BINARY but\n\
9753 also includes Telnet negotiations on TCP/IP connections."));
9757 "Syntax: SET SESSION-LOG { BINARY, DEBUG, TEXT, TIMESTAMPED-TEXT }\n\
9758 If BINARY, record all CONNECT characters in session log. If TEXT, strip\n\
9759 out CR, NUL, and XON/XOFF characters. DEBUG is the same as BINARY but\n\
9760 also includes Telnet negotiations on TCP/IP connections."));
9764 "Syntax: SET SESSION-LOG { BINARY, DEBUG, TEXT, TIMESTAMPED-TEXT }\n\
9765 If BINARY, record all CONNECT characters in session log. If TEXT, strip\n\
9766 out CR, NUL, and XON/XOFF characters. DEBUG is the same as BINARY but\n\
9767 also includes Telnet negotiations on TCP/IP connections."));
9771 "Syntax: SET SESSION-LOG { BINARY, DEBUG, TEXT, TIMESTAMPED-TEXT }\n\
9772 If BINARY, record all CONNECT characters in session log. If TEXT, strip\n\
9773 out CR, NUL, and XON/XOFF characters. DEBUG is the same as BINARY but\n\
9774 also includes Telnet negotiations on TCP/IP connections."));
9778 "Syntax: SET SESSION-LOG { BINARY, DEBUG, TEXT, TIMESTAMPED-TEXT }\n\
9779 If BINARY, record all CONNECT characters in session log. If TEXT, strip\n\
9780 out NUL and XON/XOFF characters. DEBUG is the same as BINARY but\n\
9781 also includes Telnet negotiations on TCP/IP connections."));
9785 "Syntax: SET SESSION-LOG { BINARY, DEBUG, TEXT, TIMESTAMPED-TEXT }\n\
9786 If BINARY, record all CONNECT characters in session log. If TEXT, strip\n\
9787 out CR, NUL, and XON/XOFF characters. DEBUG is the same as BINARY but\n\
9788 also includes Telnet negotiations on TCP/IP connections."));
9792 "Syntax: SET SESSION-LOG { BINARY, DEBUG, TEXT, TIMESTAMPED-TEXT }\n\
9793 If BINARY, record all CONNECT characters in session log. If TEXT, strip\n\
9794 out LF, NUL and XON/XOFF characters."));
9798 "Syntax: SET SESSION-LOG { BINARY, DEBUG, TEXT, TIMESTAMPED-TEXT }\n\
9799 If BINARY, record all CONNECT characters in session log. If TEXT, strip\n\
9800 out LF, NUL and XON/XOFF characters."));
9807 #endif /* STRATUS */
9808 #endif /* datageneral */
9809 #endif /* OS2ORUNIX */
9814 return(hmsg("Syntax: SET SPEED number\n\
9815 Speed for serial-port communication device specified in most recent\n\
9816 SET PORT command, in bits per second. Type SET SPEED ? for a list of\n\
9817 possible speeds."));
9819 return(hmsg("Syntax: SET SPEED number\n\
9820 Speed for serial-port communication device specified in most recent\n\
9821 SET LINE command, in bits per second. Type SET SPEED ? for a list of\n\
9822 possible speeds. Has no effect on job's controlling terminal."));
9824 #endif /* NOLOCAL */
9828 return(hmsga(hxyrcv));
9830 return(hmsga(hxysnd));
9832 return(hmsga(hxyrpt));
9837 return(hmsga(hsetsrv));
9838 #endif /* NOSERVER */
9842 return(hmsga(hxytel));
9845 return(hmsga(hxytopt));
9850 return(hmsga(hsetxmit));
9855 return(hmsg("Syntax: SET UNKNOWN-CHAR-SET action\n\
9856 DISCARD (default) means reject any arriving files encoded in unknown\n\
9857 character sets. KEEP means to accept them anyway."));
9858 #endif /* NOCSETS */
9862 return(hmsga(hxywild));
9867 return(hmsga(hxywind));
9869 return(hmsga(hxyxfer));
9875 return(hmsga(hxymouse));
9876 #endif /* OS2MOUSE */
9877 #endif /* NOLOCAL */
9880 return(hmsg("Syntax: SET ALARM [ { seconds, hh:mm:ss } ]\n\
9881 Number of seconds from now, or time of day, after which IF ALARM\n\
9882 will succeed. 0, or no time at all, means no alarm."));
9885 return(hmsga(hxyxyz));
9889 return(hmsg("Syntax: SET PREFIXING { ALL, CAUTIOUS, MINIMAL }\n\
9891 Selects the degree of control-character prefixing. Also see HELP SET CONTROL."
9893 #endif /* CK_SPEED */
9897 return(hmsg("Syntax: SET LOGIN { USERID, PASSWORD, PROMPT } <text>\n\
9898 Provides access information for use by login scripts."));
9903 return(hmsg("Syntax: SET TEMP-DIRECTORY [ <directory-name> ]\n\
9904 Overrides automatic assignment of \\v(tmpdir) variable."));
9909 return(hmsg("Syntax: SET TITLE <text>\n\
9910 Sets window title to text instead of using current host/port name."));
9916 return(hmsg("Syntax: SET EDITOR pathname [ options ]\n\
9917 Specifies the name of your preferred editor, plus any command-line\n\
9918 options. SHOW EDITOR displays it."));
9919 #endif /* NOFRILLS */
9925 return(hmsg("Syntax: SET BROWSER [ pathname [ options ] ]\n\
9926 Specifies the name of your preferred browser plus any command-line\n\
9927 options. SHOW BROWSER displays it. Omit pathname and options to use\n\
9930 return(hmsg("Syntax: SET BROWSER [ pathname [ options ] ]\n\
9931 Specifies the name of your preferred browser plus any command-line\n\
9932 options. SHOW BROWSER displays it."));
9934 #endif /* BROWSER */
9938 return(hmsga(hxytapi));
9939 #endif /* CK_TAPI */
9943 return(hmsga(hxywin95));
9948 return(hmsga(hxyfunc));
9951 #ifdef CK_AUTHENTICATION
9953 return(hmsga(hmxyauth));
9954 #else /* CK_AUTHENTICATION */
9957 return(hmsga(hmxyauth));
9959 #endif /* CK_AUTHENTICATION */
9963 return(hmsg("Syntax: SET FTP [ pathname [ options ] ]\n\
9964 Specifies the name of your ftp client, plus any command-line options.\n\
9965 SHOW FTP displays it."));
9966 #endif /* BROWSER */
9969 return(hmsg("Syntax: SET SLEEP CANCELLATION { ON, OFF }\n\
9970 Tells whether SLEEP (PAUSE) or WAIT commands can be interrupted from the\n\
9971 keyboard; ON by default."));
9974 return(hmsga(hmxycd));
9977 return(hmsg("Syntax: SET SERIAL dps\n\
9978 d is data length in bits, 7 or 8; p is first letter of parity; s is stop\n\
9979 bits, 1 or 2. Examples: \"set serial 7e1\", \"set serial 8n1\"."));
9983 return(hmsg("Syntax: SET STOP-BITS { 1, 2 }\n\
9984 Number of stop bits to use on SET LINE connections, normally 1."));
9985 #endif /* HWPARITY */
9989 return(hmsg("Syntax: SET DISCONNECT { ON, OFF }\n\
9990 Whether to close and release a SET LINE device automatically upon\n\
9991 disconnection; OFF = keep device open (default); ON = close and release."));
9992 #endif /* NOLOCAL */
9996 return(hmsg("Syntax: SET STREAMING { ON, OFF, AUTO }\n\
9997 Tells Kermit whether streaming protocol can be used during Kermit file\n\
9998 transfers. Default is AUTO, meaning use it if connection is reliable."));
9999 #endif /* STREAMING */
10002 return(hmsg("Syntax: SET RELIABLE { ON, OFF, AUTO }\n\
10003 Tells Kermit whether its connection is reliable. Default is AUTO,\n\
10004 meaning Kermit should figure it out for itself."));
10007 return(hmsg("Syntax: SET CLEAR-CHANNEL { ON, OFF, AUTO }\n\
10008 Tells Kermit whether its connection is transparent to all 8-bit bytes.\n\
10009 Default is AUTO, meaning Kermit figures it out from the connection type.\n\
10010 When both sender and receiver agree channel is clear, SET PREFIXING NONE\n\
10011 is used automatically."));
10015 return(hmsg("Syntax: SET TRANSACTION-LOG { BRIEF, FTP, VERBOSE }\n\
10016 Selects the transaction-log format; BRIEF and FTP have one line per file;\n\
10017 FTP is compatible with FTP log. VERBOSE (the default) has more info."));
10021 return(hmsg("Syntax: SET OPTIONS command [ switches... ]\n\
10022 For use with commands that have switches; sets the default switches for\n\
10023 the given command. Type SET OPTIONS ? for a list of amenable commands."));
10027 return(hmsga(hmxytimer));
10032 return(hmsga(hmxxchroot));
10033 #endif /* XYROOT */
10037 return(hmsga(hmxyssh));
10038 #endif /* ANYCMD */
10042 return(hmsga(hmxylocus));
10048 return(hmsga(hmxygui));
10053 return(hmsga(hmxymatch));
10056 printf("Not available - \"%s\"\n",cmdbuf);
10062 /* D O H F U N C -- Give help for a function */
10065 dohfunc(xx) int xx; {
10068 printf("\n Type SHOW FUNCTIONS to see a list of available functions.\n"
10071 " Type HELP FUNCTION <name> for help on a particular function.\n");
10073 " For function settings use HELP SET FUNCTION and SHOW SCRIPTS.\n\n");
10076 if (xx == FN_WORD) /* Long help message */
10077 return(hmsga(hmfword));
10081 case FN_IND: /* Index (of string 1 in string 2) */
10082 case FN_RIX: /* Rindex (index from right) */
10083 printf("\\f%sindex(s1,s2,n1)\n\
10084 s1 = string to look for.\n\
10085 s2 = string to look in.\n\
10086 n1 = optional 1-based starting position, default = 1.\n",
10087 xx == FN_RIX ? "r" : ""
10089 printf("Returns integer:\n\
10090 1-based position of %smost occurrence of s1 in s2, ignoring the %smost\n\
10091 (n1-1) characters in s2; returns 0 if s1 not found in s2.\n",
10092 xx == FN_IND ? "left" : "right",
10093 xx == FN_IND ? "left" : "right"
10096 case FN_SEARCH: /* Search for pattern */
10097 case FN_RSEARCH: /* Search for pattern from right */
10098 printf("\\f%ssearch(s1,s2,n1)\n\
10099 s1 = pattern to look for.\n\
10100 s2 = string to look in.\n\
10101 n1 = optional 1-based offset, default = 1.\n",
10102 xx == FN_RSEARCH ? "r" : ""
10104 printf("Returns integer:\n\
10105 1-based position of %smost match for s1 in s2, ignoring the %smost\n\
10106 (n1-1) characters in s2; returns 0 if no match.\n",
10107 xx == FN_SEARCH ? "left" : "right",
10108 xx == FN_SEARCH ? "left" : "right"
10110 printf(" See HELP WILDCARDS for info about patterns.\n");
10112 case FN_LEN: /* Length (of string) */
10113 printf("\\flength(s1)\n\
10115 printf("Returns integer:\n\
10116 Length of string s1.\n");
10118 case FN_LIT: /* Literal (don't expand the string) */
10119 printf("\\fliteral(s1)\n\
10121 printf("Returns string:\n\
10122 s1 literally without evaluation.\n");
10124 case FN_LOW: /* Lower (convert to lowercase) */
10125 printf("\\flower(s1)\n\
10127 printf("Returns string:\n\
10128 s1 with uppercase letters converted to lowercase.\n");
10130 case FN_MAX: /* Max (maximum) */
10131 printf("\\fmaximum(n1,n2)\n\
10134 printf("Returns integer:\n\
10135 The greater of n1 and n2.\n");
10137 case FN_MIN: /* Min (minimum) */
10138 printf("\\fminimum(n1,n2)\n\
10141 printf("Returns integer:\n\
10142 The lesser of n1 and n2.\n");
10144 case FN_MOD: /* Mod (modulus) */
10145 printf("\\fmodulus(n1,n2)\n\
10148 printf("Returns integer:\n\
10149 The remainder after dividing n1 by n2.\n");
10151 case FN_EVA: /* Eval (evaluate arith expression) */
10152 printf("\\fevaluate(e)\n\
10153 e = arithmetic expression.\n");
10154 printf("Returns integer:\n\
10155 The result of evaluating the expression.\n");
10157 case FN_SUB: /* Substr (substring) */
10158 printf("\\fsubstring(s1,n1,n2)\n\
10160 n1 = integer, 1-based starting position, default = 1.\n\
10161 n2 = integer, length, default = length(s1) - n1 + 1.\n");
10162 printf("Returns string:\n\
10163 Substring of s1 starting at n1, length n2.\n");
10165 case FN_UPP: /* Upper (convert to uppercase) */
10166 printf("\\fupper(s1)\n\
10168 printf("Returns string:\n\
10169 s1 with lowercase letters converted to uppercase.\n");
10171 case FN_REV: /* Reverse (a string) */
10172 printf("\\freverse(s1)\n\
10174 printf("Returns string:\n\
10175 s1 with its characters in reverse order.\n");
10177 case FN_REP: /* Repeat (a string) */
10178 printf("\\frepeat(s1,n1)\n\
10181 printf("Returns string:\n\
10182 s1 repeated n1 times.\n");
10184 case FN_EXE: /* Execute (a macro) */
10185 printf("\\fexecute(m1,a1,a2,a3,...)\n\
10186 m1 = macro name.\n\
10187 a1 = argument 1.\n\
10188 a2 = argument 2, etc\n");
10189 printf("Returns string:\n\
10190 The return value of the macro (HELP RETURN for further info).\n");
10192 case FN_LPA: /* LPAD (left pad) */
10193 case FN_RPA: /* RPAD (right pad) */
10194 printf("\\f%cpad(s1,n1,c1)\n\
10197 c1 = character, default = space.\n",
10198 xx == FN_LPA ? 'l' : 'r');
10199 printf("Returns string:\n\
10200 s1 %s-padded with character c1 to length n1.\n",
10201 xx == FN_LPA ? "left" : "right");
10203 case FN_DEF: /* Definition of a macro, unexpanded */
10204 printf("\\fdefinition(m1)\n\
10205 m1 = macro name.\n");
10206 printf("Returns string:\n\
10207 Literal definition of macro m1.\n");
10209 case FN_CON: /* Contents of a variable, ditto */
10210 printf("\\fcontents(v1)\n\
10211 v1 = variable name such as \\%%a.\n");
10212 printf("Returns string:\n\
10213 Literal definition of variable v1, evaluated one level only.\n");
10215 case FN_FIL: /* Next file */
10216 printf("\\fnextfile()\n");
10217 printf("Returns string:\n\
10218 Name of next file from list created by most recent \\f[r]files() or\n\
10219 \\f[r]dir()invocation, or an empty string if there are no more files in\n\
10222 case FN_FC: /* File count */
10223 printf("\\ffiles(f1[,&a]) - File list.\n\
10224 f1 = file specification, possibly containing wildcards.\n\
10225 &a = optional name of array to assign file list to.\n");
10226 printf("Returns integer:\n\
10227 The number of regular files that match f1. Use with \\fnextfile().\n");
10229 case FN_CHR: /* Character (like BASIC CHR$()) */
10230 printf("\\fcharacter(n1)\n\
10232 printf("Returns character:\n\
10233 The character whose numeric code is n1.\n");
10235 case FN_RIG: /* Right (like BASIC RIGHT$()) */
10236 printf("\\fright(s1,n1)\n\
10238 n1 = integer, default = length(s1).\n");
10239 printf("Returns string:\n\
10240 The rightmost n1 characters of string s1.\n");
10242 case FN_LEF: /* Left (like BASIC LEFT$()) */
10243 printf("\\fleft(s1,n1)\n\
10245 n1 = integer, default = length(s1).\n");
10246 printf("Returns string:\n\
10247 The leftmost n1 characters of string s1.\n");
10249 case FN_COD: /* Code value of character */
10250 printf("\\fcode(s1)\n\
10251 c1 = character.\n");
10252 printf("Returns integer:\n\
10253 The numeric code of the first character in string s1, or 0 if s1 empty.\n");
10255 case FN_RPL: /* Replace */
10256 printf("\\freplace(s1,s2,s3[,n1])\n\
10257 s1 = original string.\n\
10258 s2 = match string.\n\
10259 s3 = replacement string.\n\
10260 n1 = occurrence.\n");
10261 printf("Returns string:\n\
10262 s1 with occurrence number n1 of s2 replaced by s3.\n\
10263 If n1 = 0 or omitted, all occurrences are replaced.\n\
10264 If n1 < 0, occurrences are counted from the right.\n");
10267 case FN_FD: /* File date */
10268 printf("\\fdate(f1)\n\
10269 f1 = filename.\n");
10271 printf("Returns string:\n\
10272 Creation date of file f1, format: yyyymmdd hh:mm:ss.\n");
10274 printf("Returns string:\n\
10275 Modification date of file f1, format: yyyymmdd hh:mm:ss.\n");
10278 case FN_FS: /* File size */
10279 printf("\\fsize(f1)\n\
10280 f1 = filename.\n");
10281 printf("Returns integer:\n\
10282 Size of file f1.\n");
10284 case FN_VER: /* Verify */
10285 printf("\\fverify(s1,s2,n1)\n\
10286 s1 = string of characters to look for.\n\
10287 s2 = string to look in.\n\
10288 n1 = starting position in s2.\n");
10289 printf("Returns integer:\n\
10290 1-based position of first character in s2 that is not also in s1,\n\
10291 or -1 if s1 is empty, or 0 if all characters in s2 are also in s1.\n");
10293 case FN_IPA: /* Find and return IP address */
10294 printf("\\fipaddress(s1,n1)\n\
10296 n1 = 1-based integer starting position, default = 1.\n");
10297 printf("Returns string:\n\
10298 First IP address in s1, scanning from left starting at position n1.\n");
10300 case FN_HEX: /* Hexify */
10301 printf("\\fhexify(s1)\n\
10303 printf("Returns string:\n\
10304 The hexadecimal representation of s1. Also see \\fn2hex().\n");
10306 case FN_UNH: /* Unhexify */
10307 printf("\\funhexify(h1)\n\
10308 h1 = Hexadecimal string.\n");
10309 printf("Returns string:\n\
10310 The result of unhexifying s1, or nothing if s1 is not a hex string.\n");
10312 case FN_UNTAB: /* Untabify */
10313 printf("\\funtabify(s1)\n\
10315 printf("Returns string:\n\
10316 The result of converting tabs in s1 to spaces assuming tab stops every\n\
10319 case FN_BRK: /* Break */
10320 case FN_SPN: /* Span */
10321 printf("\\f%s(s1,s2,n1)\n\
10322 s1 = string to look in.\n\
10323 s2 = string of characters to look for.\n\
10324 n1 = 1-based integer starting position, default = 1.\n",
10325 xx == FN_BRK ? "break" : "span"
10327 printf("Returns string:\n\
10328 s1 up to the first occurrence of any character%salso in s2,\n\
10329 scanning from the left starting at position n1.\n",
10330 xx == FN_SPN ? " not " : " ");
10332 case FN_TRM: /* Trim */
10333 case FN_LTR: /* Left-Trim */
10334 printf("\\f%s(s1,s2)\n\
10335 s1 = string to look in.\n\
10336 s2 = string of characters to look for, default = blanks and tabs.\n",
10337 xx == FN_TRM ? "trim" : "ltrim");
10338 printf("Returns string:\n\
10339 s1 with all characters that are also in s2 trimmed from the %s.\n.",
10340 xx == FN_TRM ? "right" : "left");
10342 case FN_CAP: /* Capitalize */
10343 printf("\\fcapitalize(s1)\n\
10345 printf("Returns string:\n\
10346 s1 with its first letter converted to uppercase and the remaining\n\
10347 letters to lowercase.\n");
10348 printf("Synonym: \\fcaps(s1)\n");
10350 case FN_TOD: /* Time-of-day-to-secs-since-midnite */
10351 printf("\\ftod2secs(s1)\n\
10352 s1 = time-of-day string, hh:mm:ss, 24-hour format.\n");
10353 printf("Returns number:\n\
10354 Seconds since midnight.\n");
10356 case FN_FFN: /* Full file name */
10357 printf("\\fpathname(f1)\n\
10358 f1 = filename, possibly wild.\n");
10359 printf("Returns string:\n\
10360 Full pathname of f1.\n");
10362 case FN_CHK: /* Checksum of text */
10363 printf("\\fchecksum(s1)\n\
10365 printf("Returns integer:\n\
10366 16-bit checksum of string s1.\n");
10368 case FN_CRC: /* CRC-16 of text */
10369 printf("\\fcrc16(s1)\n\
10371 printf("Returns integer:\n\
10372 16-bit cyclic redundancy check of string s1.\n");
10374 case FN_BSN: /* Basename of file */
10375 printf("\\fbasename(f1)\n\
10376 f1 = filename, possibly wild.\n");
10377 printf("Returns string:\n\
10378 Filename f1 stripped of all device and directory information.\n");
10380 case FN_CMD: /* Output of a command (cooked) */
10381 printf("\\fcommand(s1)\n\
10383 printf("Returns string:\n\
10384 Output of system command s1, if any, with final line terminator stripped.\n"
10387 case FN_RAW: /* Output of a command (raw) */
10388 printf("\\frawcommand(s1)\n\
10390 printf("Returns string:\n\
10391 Output of system command s1, if any.\n");
10393 case FN_STX: /* Strip from right */
10394 printf("\\fstripx(s1,c1)\n\
10395 s1 = string to look in.\n\
10396 c1 = character to look for, default = \".\".\n");
10397 printf("Returns string:\n\
10398 s1 up to the rightmost occurrence of character c1.\n"
10402 case FN_STL: /* Strip from left */
10403 printf("\\flop(s1,c1)\n\
10404 s1 = string to look in.\n\
10405 c1 = character to look for, default = \".\".\n");
10406 printf("Returns string:\n\
10407 The part of s1 after the leftmost occurrence of character c1.\n"
10411 case FN_STN: /* Strip n chars */
10412 printf("\\fstripn(s1,n1)\n\
10413 s1 = string to look in.\n\
10414 n1 = integer, default = 0.\n");
10415 printf("Returns string:\n\
10416 s1 with n1 characters removed from the right.\n"
10420 case FN_STB: /* Strip enclosing brackets */
10421 printf("\\fstripb(s1[,c1[,c2]])\n\
10422 s1 = original string.\n\
10423 c1 = optional first character\n");
10425 c2 = optional final character.\n");
10426 printf("Returns string:\n\
10427 s1 with the indicated enclosing characters removed. If c1 and c2 not\n\
10428 specified, any matching brackets, braces, parentheses, or quotes are\n");
10430 assumed. If c1 is given but not c2, the appropriate c2 is assumed.\n\
10431 if both c1 and c2 are given, they are used as-is.\n"
10434 "Alternative format:\n\
10435 Include a grouping mask number in place of c1 and omit c2 to specify more\n\
10436 than one possibility at once; see \\fword() for details.\n"
10441 case FN_SCRN_CX: /* Screen Cursor X Pos */
10442 printf("\\fscrncurx()\n");
10443 printf("Returns integer:\n\
10444 The 0-based X coordinate (column) of the Terminal screen cursor.\n");
10446 case FN_SCRN_CY: /* Screen Cursor Y Pos */
10447 printf("\\fscrncury()\n");
10448 printf("Returns integer:\n\
10449 The 0-based Y coordinate (row) of the Terminal screen cursor.\n");
10451 case FN_SCRN_STR: /* Screen String */
10452 printf("\\fscrnstr(ny,nx,n1)\n\
10456 printf("Returns string:\n\
10457 The string at Terminal-screen coordinates (nx,ny), length n1,\n\
10458 blanks included. Coordinates start at 0. Default values are\n\
10459 0 for ny and nx, and line width for n1.\n");
10463 case FN_2HEX: /* Num to hex */
10464 printf("\\fn2hex(n1) - Number to hex\n n1 = integer.\n");
10465 printf("Returns string:\n The hexadecimal representation of n1.\n");
10468 case FN_2OCT: /* Num to hex */
10469 printf("\\fn2octal(n1) - Number to octal\n n1 = integer.\n");
10470 printf("Returns string:\n The octal representation of n1.\n");
10474 case FN_DIR: /* Recursive directory count */
10475 printf("\\fdirectories(f1) - Directory list.\n\
10476 f1 = directory specification, possibly containing wildcards.\n\
10477 &a = optional name of array to assign directory list to.\n");
10478 printf("Returns integer:\n\
10479 The number of directories that match f1; use with \\fnextfile().\n");
10482 case FN_RFIL: /* Recursive file count */
10483 printf("\\frfiles(f1[,&a]) - Recursive file list.\n\
10484 f1 = file specification, possibly containing wildcards.\n\
10485 &a = optional name of array to assign file list to.\n");
10486 printf("Returns integer:\n\
10487 The number of files whose names match f1 in the current or given\n\
10488 directory tree; use with \\fnextfile().\n");
10491 case FN_RDIR: /* Recursive directory count */
10492 printf("\\frdirectories(f1) - Recursive directory list.\n\
10493 f1 = directory specification, possibly containing wildcards.\n\
10494 &a = optional name of array to assign directory list to.\n");
10495 printf("Returns integer:\n\
10496 The number of directories that match f1 in the current or given directory\n\
10497 tree. Use with \\fnextfile().\n");
10499 #endif /* RECURSIVE */
10501 case FN_DNAM: /* Directory part of a filename */
10502 printf("\\fdirname(f) - Directory part of a filename.\n\
10503 f = a file specification.\n");
10504 printf("Returns directory name:\n\
10505 The full name of the directory that the file is in, or if the file is a\n\
10506 directory, its full name.\n");
10510 case FN_RAND: /* Random number */
10511 printf("\\frandom(n) - Random number.\n\
10512 n = a positive integer.\n");
10513 printf("Returns integer:\n\
10514 A random number between 0 and n-1.\n");
10516 #endif /* NORANDOM */
10518 case FN_SPLIT: /* Split */
10519 printf("\\fsplit(s1,&a,s2,s3,n2,n3) - \
10520 Assign string words to an array.\n\
10521 s1 = source string\n &a = array designator\n s2 = optional break set.\n");
10522 printf(" s3 = optional include set.\n");
10523 printf(" n2 = optional grouping mask.\n");
10524 printf(" n3 = optional separator flag.\n");
10525 printf(" s2, s3, n2, n3 are as in \\fword().\n");
10527 " All arguments are optional; if \\&a[] already exists, it is recycled;\n\
10528 if array not specified, the count is returned but no array is created.\n");
10529 printf("Returns integer:\n\
10530 Number of words in source string.\n");
10533 case FN_DTIM: /* CVTDATE */
10534 printf("\\fcvtdate([date-time][,n1]) - Date/time conversion.\n");
10535 printf(" Converts date and/or time to standard format.\n");
10536 printf(" If no date/time given, returns current date/time.\n");
10537 printf(" [date-time], if given, is free-format date and/or time.\n");
10538 printf(" HELP DATE for info about date-time formats.\n");
10539 printf("Returns string:\n\
10540 Standard-format date and time: yyyymmdd hh:mm:ss (numeric)\n");
10541 printf(" If n1 is given:\n\
10542 n1 = 1: yyyy-mmm-dd hh:mm:ss (mmm = English 3-letter month abbreviation)\n\
10543 n1 = 2: dd-mmm-yyyy hh:mm:ss (ditto)\n\
10544 n1 = 3: yyyymmddhhmmss (all numeric)\n");
10547 case FN_JDATE: /* DOY */
10548 printf("\\fdoy([date-time]) - Day of Year.\n");
10549 printf(" Converts date and/or time to day-of-year (DOY) format.\n");
10550 printf(" If no date/time given, returns current date.\n");
10551 printf(" [date-time], if given, is free-format date and/or time.\n");
10552 printf(" HELP DATE for info about date-time formats.\n");
10553 printf("Returns numeric string:\n\
10554 DOY: yyyyddd, where ddd is 1-based day number in year.\n");
10558 printf("\\fdialconvert(phone-number) - Convert phone number.\n");
10559 printf(" Converts the given phone number for dialing according\n");
10561 " to the prevailing dialing rules -- country code, area code, etc.\n");
10562 printf("Returns string:\n\
10563 The dial string that would be used if the same phone number had been\n\
10564 given to the DIAL command.\n"
10568 case FN_DATEJ: /* DOY2DATE */
10569 printf("\\fdoy2date([doy[ time]]) - Day of Year to Date.\n");
10570 printf(" Converts yyyymmm to yyyymmdd\n");
10571 printf(" If time included, it is converted to 24-hour format.");
10573 "Returns standard date or date-time string yyyymmdd hh:mm:ss\n");
10577 printf("\\fmjd([[date][ time]]) - Modified Julian Date (MJD).\n");
10579 " Converts date and/or time to MJD, the number of days since 17 Nov 1858.\n");
10580 printf(" HELP DATE for info about date-time formats.\n");
10581 printf("Returns: integer.\n");
10585 printf("\\fmjd2date(mjd) - Modified Julian Date (MJD) to Date.\n");
10586 printf(" Converts MJD to standard-format date.\n");
10587 printf("Returns: yyyymmdd.\n");
10591 printf("\\fday([[date][ time]]) - Day of Week.\n");
10592 printf("Returns day of week of given date as Mon, Tue, etc.\n");
10593 printf("HELP DATE for info about date-time formats.\n");
10597 printf("\\fnday([[date][ time]]) - Numeric Day of Week.\n");
10599 "Returns numeric day of week of given date, 0=Sun, 1=Mon, ..., 6=Sat.\n");
10600 printf("HELP DATE for info about date-time formats.\n");
10604 printf("\\ftime([[date][ time]]) - Time.\n");
10606 "Returns time portion of given date and/or time in hh:mm:ss format.\n");
10607 printf("If no argument given, returns current time.\n");
10608 printf("HELP DATE for info about date-time formats.\n");
10612 printf("\\fntime([[date][ time]]) - Numeric Time.\n");
10614 "Returns time portion of given date and/or time as seconds since midnight.\n");
10615 printf("If no argument given, returns current time.\n");
10616 printf("HELP DATE for info about date-time formats.\n");
10620 printf("\\fn2time(seconds) - Numeric Time to Time.\n");
10622 "Returns the given number of seconds in hh:mm:ss format.\n");
10626 printf("\\fpermissions(file) - Permissions of File.\n");
10629 "Returns permissions of given file as they would be shown by \"ls -l\".\n"
10632 "Returns permissions of given file as they would be shown by \"dir /prot\".\n"
10634 "Returns the permissions of the given file.\n"
10641 printf("\\farraylook(pattern,&a) - Lookup pattern in array.\n\
10642 pattern = String or pattern\n");
10643 printf(" &a = array designator, can include range specifier.\n");
10645 "Returns number:\n\
10646 The index of the first matching array element or -1 if none.\n");
10647 printf("More info:\n\
10648 HELP PATTERN for pattern syntax.\n HELP ARRAY for arrays.\n");
10653 "\\ftablelook(keyword,&a,[c]) - Lookup keyword in keyword table.\n\
10654 pattern = String\n");
10655 printf(" keyword = keyword to look up (can be abbreviated).\n");
10656 printf(" &a = array designator, can include range specifier.\n");
10657 printf(" This array must be in alphabetical order.\n");
10658 printf(" c = Optional field delimiter, colon(:) by default.\n");
10660 "Returns number:\n\
10661 1 or greater, index of array element that uniquely matches given keyword;\n"
10664 "or -2 if keyword was ambiguous, or -1 if keyword empty or not found.\n"
10666 printf("Also see:\n\
10667 HELP FUNC ARRAYLOOK for a similar function.\n HELP ARRAY for arrays.\n");
10670 case FN_ABS: /* Absolute */
10671 printf("\\fabsolute(n1)\n\
10673 printf("Returns integer:\n\
10674 The absolute (unsigned) value of n1.\n");
10679 printf("\\ffpabsolute(f1,d)\n\
10680 f1 = floating-point number or integer.\n\
10682 printf("Returns floating-point number:\n\
10683 The absolute (unsigned) value of f1 to d decimal places.\n");
10687 printf("\\ffpadd(f1,f2,d)\n\
10688 f1,f2 = floating-point numbers or integers.\n\
10690 printf("Returns floating-point number:\n\
10691 The sum of f1 and f2 to d decimal places.\n");
10695 printf("\\ffpsubtract(f1,f2,d)\n\
10696 f1,f2 = floating-point numbers or integers.\n\
10698 printf("Returns floating-point number:\n\
10699 f1 minus f2 to d decimal places.\n");
10703 printf("\\ffpmultiply(f1,f2,d)\n\
10704 f1,f2 = floating-point numbers or integers.\n\
10706 printf("Returns floating-point number:\n\
10707 The product of f1 and f2 to d decimal places.\n");
10711 printf("\\ffpdivide(f1,f2,d)\n\
10712 f1,f2 = floating-point numbers or integers.\n\
10714 printf("Returns floating-point number:\n\
10715 f1 divided by f2 to d decimal places.\n");
10719 printf("\\ffpmaximum(f1,f2,d)\n\
10720 f1,f2 = floating-point numbers or integers.\n\
10722 printf("Returns floating-point number:\n\
10723 The maximum of f1 and f2 to d decimal places.\n");
10727 printf("\\ffpminimum(f1,f2,d)\n\
10728 f1,f2 = floating-point numbers or integers.\n\
10730 printf("Returns floating-point number:\n\
10731 The minimum of f1 and f2 to d decimal places.\n");
10735 printf("\\ffpmodulus(f1,f2,d)\n\
10736 f1,f2 = floating-point numbers or integers.\n\
10738 printf("Returns floating-point number:\n\
10739 The modulus of f1 and f2 to d decimal places.\n");
10743 printf("\\ffpraise(f1,f2,d)\n\
10744 f1,f2 = floating-point numbers or integers.\n\
10746 printf("Returns floating-point number:\n\
10747 f1 raised to the power f2, to d decimal places.\n");
10751 printf("\\ffpcosine(f1,d)\n\
10752 f1 = floating-point number or integer.\n\
10754 printf("Returns floating-point number:\n\
10755 The cosine of angle f1 (in radians) to d decimal places.\n");
10759 printf("\\ffpsine(f1,d)\n\
10760 f1 = floating-point number or integer.\n\
10762 printf("Returns floating-point number:\n\
10763 The sine of angle f1 (in radians) to d decimal places.\n");
10767 printf("\\ffptangent(f1,d)\n\
10768 f1 = floating-point number or integer.\n\
10770 printf("Returns floating-point number:\n\
10771 The tangent of angle f1 (in radians) to d decimal places.\n");
10775 printf("\\ffpexp(f1,d)\n\
10776 f1 = floating-point number or integer.\n\
10778 printf("Returns floating-point number:\n\
10779 e (the base of natural logarithms) raised to the f1 power,\n\
10780 to d decimal places.\n");
10784 printf("\\ffpint(f1)\n\
10785 f1 = floating-point number or integer.\n");
10786 printf("Returns integer:\n\
10787 The integer part of f1.\n");
10791 printf("\\ffplog10(f1,d)\n\
10792 f1 = floating-point number or integer.\n\
10794 printf("Returns floating-point number:\n\
10795 The logarithm, base 10, of f1 to d decimal places.\n");
10799 printf("\\ffplogn(f1,d)\n\
10800 f1 = floating-point number or integer.\n\
10802 printf("Returns floating-point number:\n\
10803 The natural logarithm of f1 to d decimal places.\n");
10807 printf("\\ffpround(f1,d)\n\
10808 f1 = floating-point number or integer.\n\
10810 printf("Returns floating-point number:\n\
10811 f1 rounded to d decimal places.\n");
10815 printf("\\ffpsqrt(f1,d)\n\
10816 f1 = floating-point number or integer.\n\
10818 printf("Returns floating-point number:\n\
10819 The square root of f1 to d decimal places.\n");
10821 #endif /* FNFLOAT */
10825 printf("\\f_eof(n1)\n\
10826 n1 = channel number.\n");
10827 printf("Returns number:\n\
10828 1 if channel n1 at end of file, 0 otherwise.\n");
10831 printf("\\f_pos(n1)\n\
10832 n1 = channel number.\n");
10833 printf("Returns number:\n\
10834 Read/write pointer of channel n1 as byte number.\n");
10837 printf("\\f_line(n1)\n\
10838 n1 = channel number.\n");
10839 printf("Returns number:\n\
10840 Read/write pointer of channel n1 as line number.\n");
10843 printf("\\f_handle(n1)\n\
10844 n1 = channel number.\n");
10845 printf("Returns number:\n\
10846 File %s of open file on channel n1.\n",
10855 printf("\\f_status(n1)\n\
10856 n1 = channel number.\n");
10857 printf("Returns number:\n\
10858 Sum of open modes of channel n1: 1 = read; 2 = write; 4 = append, or:\n\
10859 0 if not open.\n");
10862 printf("\\f_getchar(n1)\n\
10863 n1 = channel number.\n");
10864 printf(" Reads a character from channel n1 and returns it.\n");
10867 printf("\\f_getline(n1)\n\
10868 n1 = channel number.\n");
10869 printf(" Reads a line from channel n1 and returns it.\n");
10872 printf("\\f_getblock(n1,n2)\n\
10873 n1 = channel number, n2 = size\n");
10875 " Reads a block of n2 characters from channel n1 and returns it.\n");
10878 printf("\\f_putchar(n1,c)\n\
10879 n1 = channel number, c = character\n");
10880 printf(" Writes a character to channel n1.\n\
10882 1 if successful, otherwise a negative error code.\n");
10885 printf("\\f_putline(n1,s1)\n\
10886 n1 = channel number, s1 = string\n");
10888 " Writes the string s1 to channel n1 and adds a line terminator.\n\
10889 Returns number:\n");
10890 printf(" How many characters written if successful;\n\
10891 Otherwise a negative error code.\n"
10895 printf("\\f_putblock(n1,s1)\n\
10896 n1 = channel number, s1 = string\n");
10898 " Writes the string s1 to channel n1.\n\
10899 Returns number:\n");
10900 printf(" How many characters written if successful;\n\
10901 Otherwise a negative error code.\n"
10905 printf("\\f_errmsg([n1])\n\
10906 n1 = numeric error code, \\v(f_error) by default.\n");
10907 printf(" Returns the associated error message string.\n");
10909 #endif /* CKCHANNELIO */
10912 printf("\\faaconvert(name,&a[,&b])\n\
10913 name = name of associative array, &a and &b = names of regular arrays.\n");
10915 " Converts the given associative array into two regular arrays, &a and &b,\n\
10916 containing the indices and values, respectively:\n");
10917 printf("Returns number:\n\
10918 How many elements were converted.\n");
10923 printf("\\fkrbtickets(n)\n\
10924 n = Kerberos version number (4 or 5).\n\
10926 The number of active Kerberos 4 or 5 tickets.\n\
10927 Resets the ticket list used by \\fkrbnextticket(n).\n");
10931 printf("\\fkrbnextticket(n)\n\
10932 n = Kerberos version number (4 or 5).\n\
10934 The next ticket in the Kerberos 4 or 5 ticket list that was set up by\n\
10935 the most recent invocation of \\fkrbtickets(n).\n");
10939 printf("\\fkrbisvalid(n,name)\n\
10940 n = Kerberos version number (4 or 5).\n\
10941 name = a ticket name as returned by \\fkrbnextticket(n).\n\
10943 1 if the ticket is valid, 0 if not valid.\n\
10944 A ticket is valid if all the following conditions are true:\n\n");
10946 (i) it exists in the current cache file;\n\
10947 (ii) it is not expired;\n\
10948 (iii) it is not marked invalid (K5 only);\n\
10949 (iv) it was issued from the current IP address\n");
10950 printf("\n This value can be used in an IF statement, e.g.:\n\n");
10951 printf(" if \\fkrbisvalid(4,krbtgt.FOO.BAR.EDU@FOO.BAR.EDU) ...\n");
10955 printf("\\fkrbtimeleft(n,name)\n\
10956 n = Kerberos version number (4 or 5).\n\
10957 name = a ticket name as returned by \\fkrbnextticket(n).\n\
10959 The number of seconds remaining in the ticket's lifetime.\n");
10963 printf("\\fkrbflags(n,name)\n\
10964 n = Kerberos version number (4 or 5).\n\
10965 name = a ticket name as returned by \\fkrbnextticket(n).\n\
10966 Returns string:\n");
10968 " The flags string as reported with AUTH K5 LIST /FLAGS. This string can\n\
10969 be searched for a particular flag using the \\findex() function when\n\
10970 SET CASE is ON (for case sensitive searches). Flag strings are only\n\
10971 available for K5 tickets.\n");
10973 #endif /* CK_KERBEROS */
10976 printf("\\fpattern(s)\n\
10978 Returns string: s with any variables, etc, evaluated in the normal manner.\n"
10981 For use with INPUT, MINPUT, and REINPUT to declare that a search target is\n\
10982 a pattern rather than a literal string.\n");
10986 printf("\\fhex2n(s)\n\
10987 s = hexadecimal number\n\
10988 Returns decimal equivalent.\n");
10992 printf("\\fhex2ip(s)\n\
10993 s = 8-digit hexadecimal number\n\
10994 Returns the equivalent decimal dotted IP address.\n");
10998 printf("\\fip2hex(s)\n\
10999 s = decimal dotted IP address\n\
11000 Returns the equivalent 8-digit hexadecimal number.\n");
11004 printf("\\foct2n(s)\n\
11005 s = octal number\n\
11006 Returns decimal equivalent.\n");
11010 printf("\\fradix(s,n1,n2)\n\
11011 s = number in radix n1\n\
11012 Returns the number's representation in radix n2.\n");
11016 printf("\\fjoin(&a[,s[,n1[,n2]]])\n\
11017 &a = array designator, can include range specifier.\n\
11018 s = optional separator.\n");
11020 n1 = nonzero to put grouping around elements that contain spaces;\n\
11021 see \\fword() grouping mask for values of n.\n");
11023 n2 = 0 or omitted to put spaces between elements; nonzero to omit them.\n");
11025 Returns the (selected) elements of the array joined to together,\n\
11026 separated by the separator.\n");
11030 printf("\\fsubstitute(s1,s2,s3)\n\
11031 s1 = Source string.\n\
11032 s2 = List of characters to be translated.\n\
11033 s3 = List of characters to translate them to.\n");
11035 " Returns: s1, with each character that is in s2 translated to the\n\
11036 corresponding character in s3. s2 and s3 can contain ASCII ranges,\n\
11037 like [a-z]. Any characters in s2 that don't have corresponding\n\
11038 characters in s3 (after range expansion) are removed from the result.\n");
11043 printf("\\fsexpression(s1)\n\
11044 s1 = S-Expression.\n");
11045 printf(" Returns: The result of evaluating s1.\n");
11048 #endif /* NOSEXP */
11051 printf("\\fcmdstack(n1,n2)\n\
11052 n1 = Command-stack level, 0 to \\v(cmdlevel), default \\v(cmdlevel).\n\
11053 n2 = Function code, 0 or 1.\n");
11054 printf("Returns:\n");
11055 printf(" n2 = 0: name of object at stack level n1\n\
11056 n2 = 1: type of object at stack level n1:\n\
11057 0 = interactive prompt\n\
11058 1 = command file\n\
11065 printf("\\fdiffdates(d1,d2)\n\
11066 d1 = free-format date and/or time (default = NOW).\n\
11068 printf("Returns:\n");
11069 printf(" Difference expressed as delta time:\n");
11070 printf(" Negative if d2 is later than d1, otherwise positive.\n");
11072 #endif /* CKFLOAT */
11075 printf("\\fcmpdates(d1,d2)\n\
11076 d1 = free-format date and/or time (default = NOW).\n\
11078 printf("Returns:\n");
11079 printf(" 0 if d1 is equal to d2;\n\
11080 1 if d1 is later than d2;\n\
11081 -1 if d1 is earlier than d2.\n");
11085 printf("\\futcdate(d1)\n\
11086 d1 = free-format date and/or time (default = NOW).\n");
11087 printf("Returns:\n");
11088 printf(" Date-time converted to UTC (GMT) yyyymmdd hh:mm:ss.\n");
11093 printf("\\faddr2name(s)\n\
11094 s = numeric IP address.\n");
11095 printf("Returns:\n");
11096 printf(" Corresponding IP hostname if found, otherwise null.\n");
11099 printf("\\fname2addr(s)\n\
11100 s = IP host name.\n");
11101 printf("Returns:\n");
11102 printf(" Corresponding numeric IP address if found, else null.\n");
11104 #endif /* TCPSOCKET */
11107 printf("\\fdelta2secs(dt)\n\
11108 dt = Delta time, e.g. +3d14:27:52.\n");
11109 printf("Returns:\n");
11110 printf(" The corresponding number of seconds.\n");
11114 printf("\\fdos2unixpath(p)\n\
11115 p = string, DOS pathname.\n");
11116 printf("Returns:\n");
11117 printf(" The argument converted to a Unix pathname.\n");
11121 printf("\\funix2dospath(p)\n\
11122 p = string, Unix pathname.\n");
11123 printf("Returns:\n");
11124 printf(" The argument converted to a DOS pathname.\n");
11129 printf("\\ferrstring(n)\n\
11130 n = platform-dependent numeric error code.\n");
11131 printf("Returns:\n");
11132 printf(" The corresponding error string.\n");
11134 #endif /* FN_ERRMSG */
11137 printf("\\fkeywordvalue(s1,c1)\n\
11138 s1 = string of the form \"name=value\"\n\
11139 c1 = separator character (default separator is \"=\")\n");
11140 printf(" Assigns the value, if any, to the named macro.\n");
11141 printf(" If s1 contains no separator, nothing happens.\n");
11143 " If s1 contains a separator but no value, the macro is undefined.\n");
11144 printf("Returns:\n");
11145 printf(" 0 on failure\n");
11146 printf(" 1 on success\n");
11151 printf("\\fsleep(n)\n\
11152 n = number of seconds\n");
11153 printf(" Pauses for the given number of seconds.\n");
11154 printf("Returns: the empty string.\n");
11158 printf("\\fmsleep(n)\n\
11159 n = number of milliseconds\n");
11160 printf(" Pauses for the given number of milliseconds.\n");
11161 printf("Returns: the empty string.\n");
11163 #endif /* COMMENT */
11167 printf("\\fshortpathname(s)\n\
11168 s = file or directory name string\n");
11169 printf(" Returns the short path form of the given input.\n");
11173 printf("\\flongpathname(s)\n\
11174 s = file or directory name string\n");
11175 printf(" Returns the long path form of the given input.\n");
11179 printf("\\fshortpathname(s)\n\
11180 Synonym for \fpathname()\n");
11184 printf("\\flongpathname(s)\n\
11185 Synonym for \fpathname()\n");
11190 printf("Sorry, help not available for \"%s\"\n",cmdbuf);
11200 /* D O H K V E R B -- Give help for a Kverb */
11203 dohkverb(xx) int xx; {
11204 int x,i,found,button,event;
11207 printf("\n Type SHOW KVERBS to see a list of available Kverbs.\n"
11210 " Type HELP KVERB <name> to see the current definition of a given Kverb.\n\n"
11214 if (xx < 0) return(xx);
11215 if ((x = cmcfm()) < 0) return(x);
11217 /* DEC VT keyboard key definitions */
11219 case K_COMPOSE : /* Compose key */
11220 printf("\\Kcompose Compose an accented character\n");
11222 case K_C_UNI16 : /* UCS2 key */
11223 printf("\\Kucs2 Enter a Unicode character\n");
11226 /* DEC arrow keys */
11228 case K_UPARR : /* DEC Up Arrow key */
11229 printf("\\Kuparr Transmit Terminal Up Arrow sequence\n");
11231 case K_DNARR : /* DEC Down Arrow key */
11232 printf("\\Kdnarr Transmit Terminal Down Arrow sequence\n");
11234 case K_RTARR : /* DEC Right Arrow key */
11235 printf("\\Krtarr Transmit Terminal Right Arrow sequence\n");
11237 case K_LFARR : /* DEC Left Arrow key */
11238 printf("\\Klfarr Transmit Terminal Left Arrow sequence\n");
11241 case K_PF1 : /* DEC PF1 key */
11242 printf("\\Kpf1,\\Kgold Transmit DEC PF1 sequence\n");
11244 case K_PF2 : /* DEC PF2 key */
11245 printf("\\Kpf2 Transmit DEC PF2 sequence\n");
11247 case K_PF3 : /* DEC PF3 key */
11248 printf("\\Kpf3 Transmit DEC PF3 sequence\n");
11250 case K_PF4 : /* DEC PF4 key */
11251 printf("\\Kpf4 Transmit DEC PF4 sequence\n");
11254 case K_KP0 : /* DEC Keypad 0 */
11255 printf("\\Kkp0 Transmit DEC Keypad-0 sequence\n");
11257 case K_KP1 : /* DEC Keypad 1 */
11258 printf("\\Kkp1 Transmit DEC Keypad-1 sequence\n");
11260 case K_KP2 : /* etc ... through 9 */
11261 printf("\\Kkp2 Transmit DEC Keypad-2 sequence\n");
11264 printf("\\Kkp3 Transmit DEC Keypad-3 sequence\n");
11267 printf("\\Kkp4 Transmit DEC Keypad-4 sequence\n");
11270 printf("\\Kkp5 Transmit DEC Keypad-5 sequence\n");
11273 printf("\\Kkp6 Transmit DEC Keypad-6 sequence\n");
11276 printf("\\Kkp7 Transmit DEC Keypad-7 sequence\n");
11279 printf("\\Kkp8 Transmit DEC Keypad-8 sequence\n");
11282 printf("\\Kkp9 Transmit DEC Keypad-9 sequence\n");
11284 case K_KPCOMA : /* DEC keypad comma */
11285 printf("\\Kkpcoma Transmit DEC Keypad-Comma sequence\n");
11287 case K_KPMINUS : /* DEC keypad minus */
11288 printf("\\Kkpminus Transmit DEC Keypad-Minus sequence\n");
11290 case K_KPDOT : /* DEC keypad period */
11291 printf("\\Kkpdot Transmit DEC Keypad-Period sequence\n");
11293 case K_KPENTER : /* DEC keypad enter */
11294 printf("\\Kkpenter Transmit DEC Keypad-Enter sequence\n");
11297 /* DEC Top-Rank F keys */
11299 case K_DECF1 : /* DEC F1 key */
11300 printf("\\Kdecf1 Transmit DEC F1 sequence for PC keyboard\n");
11302 case K_DECF2 : /* DEC F2 key */
11303 printf("\\Kdecf2 Transmit DEC F2 sequence for PC keyboard\n");
11305 case K_DECF3 : /* DEC F3 key */
11306 printf("\\Kdecf3 Transmit DEC F3 sequence for PC keyboard\n");
11308 case K_DECF4 : /* DEC F4 key */
11309 printf("\\Kdecf4 Transmit DEC F4 sequence for PC keyboard\n");
11311 case K_DECF5 : /* DEC F5 key */
11312 printf("\\Kdecf5 Transmit DEC F5 sequence for PC keyboard\n");
11314 case K_DECHOME: /* DEC HOME key */
11315 printf("\\Kdechome Transmit DEC HOME sequence for PC keyboard\n");
11318 case K_DECF6 : /* DEC F6 key */
11319 printf("\\Kdecf6 Transmit DEC F6 sequence\n");
11321 case K_DECF7 : /* etc, through F20 */
11322 printf("\\Kdecf7 Transmit DEC F7 sequence\n");
11325 printf("\\Kdecf8 Transmit DEC F8 sequence\n");
11328 printf("\\Kdecf9 Transmit DEC F9 sequence\n");
11331 printf("\\Kdecf10 Transmit DEC F10 sequence\n");
11334 printf("\\Kdecf11 Transmit DEC F11 sequence\n");
11337 printf("\\Kdecf12 Transmit DEC F12 sequence\n");
11340 printf("\\Kdecf13 Transmit DEC F13 sequence\n");
11343 printf("\\Kdecf14 Transmit DEC F14 sequence\n");
11345 case K_DECHELP : /* DEC Help key */
11346 printf("\\Kdecf15,\\Kdechelp Transmit DEC HELP sequence\n");
11348 case K_DECDO : /* DEC Do key */
11349 printf("\\Kdecf16,\\Kdecdo Transmit DEC DO sequence\n");
11352 printf("\\Kdecf17 Transmit DEC F17 sequence\n");
11355 printf("\\Kdecf18 Transmit DEC F18 sequence\n");
11358 printf("\\Kdecf19 Transmit DEC F19 sequence\n");
11361 printf("\\Kdecf20 Transmit DEC F20 sequence\n");
11364 /* DEC editing keys */
11366 case K_DECFIND : /* DEC Find key */
11367 printf("\\Kdecfind Transmit DEC FIND sequence\n");
11369 case K_DECINSERT : /* DEC Insert key */
11370 printf("\\Kdecinsert Transmit DEC INSERT HERE sequence\n");
11372 case K_DECREMOVE : /* DEC Remove key */
11373 printf("\\Kdecremove Transmit DEC REMOVE sequence\n");
11375 case K_DECSELECT : /* DEC Select key */
11376 printf("\\Kdecfselect Transmit DEC SELECT sequence\n");
11378 case K_DECPREV : /* DEC Previous Screen key */
11379 printf("\\Kdecprev Transmit DEC PREV SCREEN sequence\n");
11381 case K_DECNEXT : /* DEC Next Screen key */
11382 printf("\\Kdecnext Transmit DEC NEXT SCREEN sequence\n");
11385 /* DEC User-Defined Keys */
11387 case K_UDKF1 : /* F1 - F5 are XTERM extensions */
11388 printf("\\Kudkf1 Transmit XTERM F1 User Defined Key sequence\n");
11391 printf("\\Kudkf2 Transmit XTERM F2 User Defined Key sequence\n");
11394 printf("\\Kudkf3 Transmit XTERM F3 User Defined Key sequence\n");
11397 printf("\\Kudkf4 Transmit XTERM F4 User Defined Key sequence\n");
11400 printf("\\Kudkf5 Transmit XTERM F5 User Defined Key sequence\n");
11402 case K_UDKF6 : /* DEC User Defined Key F6 */
11403 printf("\\Kudkf6 Transmit DEC F6 User Defined Key sequence\n");
11405 case K_UDKF7 : /* DEC User Defined Key F7 */
11406 printf("\\Kudkf7 Transmit DEC F7 User Defined Key sequence\n");
11408 case K_UDKF8 : /* etc ... through F20 */
11409 printf("\\Kudkf8 Transmit DEC F8 User Defined Key sequence\n");
11412 printf("\\Kudkf9 Transmit DEC F9 User Defined Key sequence\n");
11415 printf("\\Kudkf10 Transmit DEC F10 User Defined Key sequence\n");
11418 printf("\\Kudkf11 Transmit DEC F11 User Defined Key sequence\n");
11421 printf("\\Kudkf12 Transmit DEC F12 User Defined Key sequence\n");
11424 printf("\\Kudkf13 Transmit DEC F13 User Defined Key sequence\n");
11427 printf("\\Kudkf14 Transmit DEC F14 User Defined Key sequence\n");
11431 "\\Kudkhelp,\\Kudkf15 Transmit DEC HELP User Defined Key sequence\n");
11435 "\\Kudkdo,\\Kudkf16 Transmit DEC DO User Defined Key sequence\n");
11438 printf("\\Kudkf17 Transmit DEC F17 User Defined Key sequence\n");
11441 printf("\\Kudkf18 Transmit DEC F18 User Defined Key sequence\n");
11444 printf("\\Kudkf19 Transmit DEC F19 User Defined Key sequence\n");
11447 printf("\\Kudkf20 Transmit DEC F20 User Defined Key sequence\n");
11453 "\\Kemacs_overwrite Transmit EMACS Overwrite toggle command sequence\n");
11456 /* Kermit screen-scrolling keys */
11458 case K_DNONE : /* Screen rollback: down one line */
11459 printf("\\Kdnone Screen rollback: down one line\n");
11461 case K_DNSCN : /* Screen rollback: down one screen */
11462 printf("\\Kdnscn Screen rollback: down one screen\n");
11464 case K_UPONE : /* Screen rollback: Up one line */
11465 printf("\\Kupone Screen rollback: up one line\n");
11467 case K_UPSCN : /* Screen rollback: Up one screen */
11468 printf("\\Kupscn Screen rollback: up one screen\n");
11470 case K_ENDSCN : /* Screen rollback: latest screen */
11471 printf("\\Kendscn Screen rollback: latest screen\n");
11473 case K_HOMSCN : /* Screen rollback: oldest screen */
11474 printf("\\Khomscn Screen rollback: oldest screen\n");
11476 case K_GO_BOOK : /* Scroll to bookmark */
11477 printf("\\Kgobook Screen rollback: go to bookmark\n");
11479 case K_GOTO : /* Scroll to line number */
11480 printf("\\Kgoto Screen rollback: go to line number\n");
11483 case K_LFONE : /* Horizontal Scroll: Left one cell */
11484 printf("\\Klfone Horizontal Scroll: Left one column\n");
11486 case K_LFPAGE : /* Horizontal Scroll: Left one page */
11487 printf("\\Klfpage Horizontal Scroll: Left eight columns\n");
11490 printf("\\Klfall Horizontal Scroll: Left to margin\n");
11492 case K_RTONE : /* Horizontal Scroll: Right one cell */
11493 printf("\\Krtone Horizontal Scroll: Right one column\n");
11495 case K_RTPAGE : /* Horizontal Scroll: Right one page */
11496 printf("\\Krtpage Horizontal Scroll: Right eight columns\n");
11499 printf("\\Krtall Horizontal Scroll: Right to margin\n");
11502 /* Keyboard language switching verbs */
11504 case K_KB_ENG : /* English keyboard mode */
11505 printf("\\Kkbenglish Switch to Normal (English) keyboard mode\n");
11507 case K_KB_HEB : /* Hebrew keyboard mode */
11508 printf("\\Kkbhebrew Switch to Hebrew keyboard mode\n");
11510 case K_KB_RUS : /* Russian keyboard mode */
11511 printf("\\Kkbrussian Switch to Russian keyboard mode\n");
11513 case K_KB_EMA : /* Emacs keyboard mode */
11514 printf("\\Kkbemacs Switch to EMACS keyboard mode\n");
11516 case K_KB_WP : /* Word Perfect 5.1 mode */
11517 printf("\\Kkbwp Switch to Word Perfect 5.1 keyboard mode\n");
11520 /* Mark Mode actions */
11522 case K_MARK_START : /* Enter Mark Mode/Start marking */
11523 printf("\\Kmarkstart Mark Mode: Enter mode or Start marking\n");
11525 case K_MARK_CANCEL : /* Exit Mark Mode - Do Nothing */
11526 printf("\\Kmarkcancel Mark Mode: Cancel mode\n");
11528 case K_MARK_COPYCLIP: /* Exit Mark Mode - Copy data to clipboard */
11529 printf("\\Kmarkcopyclip Mark Mode: Copy marked text to clipboard\n");
11531 case K_MARK_COPYHOST: /* Exit Mark Mode - Copy data to host */
11532 printf("\\Kmarkcopyhost Mark Mode: Copy marked text to host\n");
11534 case K_MARK_SELECT : /* Exit Mark Mode - Select */
11536 "\\Kmarkselect Mark Mode: Place marked text into \\v(select)\n");
11538 case K_BACKSRCH : /* Search Backwards for text */
11539 printf("\\Kbacksearch Search: Begin backward search for text\n");
11541 case K_FWDSRCH : /* Search Forwards for text */
11542 printf("\\Kfwdsearch Search: Begin forward search for text\n");
11544 case K_BACKNEXT : /* Search Backwards for next instance of text */
11546 "\\Kbacknext Search: Find next instance of text backwards\n");
11548 case K_FWDNEXT : /* Search Forwards for next instance of text */
11549 printf("\\Kfwdnext Search: Find next instance of text forwards\n");
11552 /* Miscellaneous Kermit actions */
11554 case K_EXIT : /* Return to command parser */
11555 printf("\\Kexit Toggle between COMMAND and CONNECT modes\n");
11557 case K_BREAK : /* Send a BREAK */
11558 printf("\\Kbreak Transmit BREAK signal to host\n");
11560 case K_RESET : /* Reset emulator */
11561 printf("\\Kreset Reset Terminal Emulator to user defaults\n");
11563 case K_DOS : /* Push to DOS (i.e. OS/2) */
11564 printf("\\Kdos,\\Kos2 Push to Command Shell\n");
11566 case K_HANGUP : /* Hang up the connection */
11567 printf("\\Khangup Hangup the active connection\n");
11569 case K_DUMP : /* Dump/Print current screen */
11571 "\\Kdump Dump/copy current screen to SET PRINTER device/file\n");
11573 case K_LBREAK : /* Send a Long BREAK */
11574 printf("\\Klbreak Transmit LONG BREAK signal to host\n");
11576 case K_NULL : /* Send a NUL */
11577 printf("\\Knull Transmit NULL ('\0') character to host\n");
11579 case K_HELP : /* Pop-up help */
11580 printf("\\Khelp Raise Pop-Up help display\n");
11582 case K_HOLDSCRN : /* Hold screen */
11583 printf("\\Kholdscrn Pause data input during CONNECT mode\n");
11585 case K_IGNORE : /* Ignore this key, don't even beep */
11586 printf("\\Kignore Ignore key\n");
11589 case K_LOGOFF : /* Turn off session logging */
11590 printf("\\Klogoff Turn off session logging (see \\Ksession)\n");
11592 case K_LOGON : /* Turn on session logging */
11593 printf("\\Klogon Turn on session logging (see \\Ksession)\n");
11597 "\\Ksession Toggle on/off session logging to 'session.log'\n");
11600 printf("\\Kautodown Toggle on/off terminal autodownload.\n");
11604 "\\Kbytesize Toggle terminal bytesize between 7 and 8 bits.\n");
11609 case K_NETHOLD : /* Put network connection on hold */
11610 case K_NEXTSESS : /* Toggle to next network session */
11611 #endif /* COMMENT */
11615 "\\Kurl Treat text under cursor position as a URL\n");
11617 case K_STATUS : /* Show status */
11619 "\\Kstatus Toggle statusline (None, Indicator, Host Writeable)\n");
11621 case K_TERMTYPE : /* Toggle term type: text/graphics */
11622 printf("\\Ktermtype Toggle Terminal Type\n");
11624 case K_PRTCTRL : /* Print Controller mode */
11625 printf("\\Kprtctrl Toggle Ctrl-Print (transparent) mode\n");
11627 case K_PRINTFF : /* Print formfeed */
11628 printf("\\Kprintff Output Form Feed to SET PRINTER device\n");
11630 case K_FLIPSCN : /* Flip screen */
11631 printf("\\Kflipscn Reverse foreground and background colors\n");
11633 case K_DEBUG : /* Toggle debugging */
11634 printf("\\Kdebug Toggle Terminal Debug mode\n");
11636 case K_TN_SAK : /* TELNET Secure Access Key */
11637 printf("\\Ktn_sak TELNET: IBM Secure Access Key\n");
11638 printf(" Used to request a Trusted Shell with AIX\n");
11640 case K_TN_AO : /* TELNET Cancel Output */
11641 printf("\\Ktn_ao TELNET: Transmit Cancel-Output request\n");
11643 case K_TN_AYT : /* TELNET Are You There */
11644 printf("\\Ktnayt TELNET: Transmit Are You There? request\n");
11646 case K_TN_EC : /* TELNET Erase Character */
11647 printf("\\Ktn_ec TELNET: Transmit Erase Character request\n");
11649 case K_TN_EL : /* TELNET Erase Line */
11650 printf("\\Ktn_el TELNET: Transmit Erase Line request\n");
11652 case K_TN_GA : /* TELNET Go Ahead */
11653 printf("\\Ktn_ga TELNET: Transmit Go Ahead request\n");
11655 case K_TN_IP : /* TELNET Interrupt Process */
11656 printf("\\Ktn_ip TELNET: Transmit Interrupt Process request\n");
11658 case K_TN_LOGOUT : /* TELNET Logout */
11659 printf("\\Ktn_logout TELNET: Transmit Do Logout Option\n");
11661 case K_TN_NAWS : /* TELNET NAWS */
11663 "\\Ktn_naws TELNET: Transmit Window Size if NAWS is active\n");
11665 case K_PASTE : /* Paste data from clipboard */
11666 printf("\\Kpaste Paste data from clipboard to host\n");
11668 case K_CLRSCRN : /* Clear Terminal Screen */
11669 printf("\\Kclearscreen Clear the Terminal screen\n");
11671 case K_PRTAUTO : /* Print Auto mode */
11672 printf("\\Kprtauto Toggle Auto-Print mode\n");
11674 case K_PRTCOPY : /* Print Copy mode */
11675 printf("\\Kprtcopy Toggle Copy-Print mode\n");
11677 case K_ANSWERBACK : /* Transmit Answerback String */
11678 printf("\\Kanswerback Transmit answerback string to host\n");
11680 case K_SET_BOOK : /* Set Bookmark */
11681 printf("\\Ksetbook Set bookmark\n");
11683 case K_QUIT : /* Quit Kermit */
11684 printf("\\Kquit Hangup connection and quit kermit\n");
11686 case K_KEYCLICK : /* Toggle Keyclick */
11687 printf("\\Kkeyclick Toggle Keyclick mode\n");
11689 case K_LOGDEBUG : /* Toggle Debug Log File */
11690 printf("\\Klogdebug Toggle Debug Logging to File\n");
11692 case K_FNKEYS : /* Show Function Key Labels */
11693 printf("\\Kfnkeys Display Function Key Labels\n");
11697 /* Mouse only Kverbs */
11699 case K_MOUSE_CURPOS :
11700 printf("\\Kmousecurpos Mouse: Move host cursor to position\n");
11702 case K_MOUSE_MARK :
11704 "\\Kmousemark Mouse: Mark text for selection (drag event only)\n");
11707 printf("\\Kmouseurl Mouse: Start browser with selected URL\n");
11709 #endif /* OS2MOUSE */
11711 /* ANSI Function Key definitions */
11713 printf("\\Kansif01 Transmit SCOANSI/AT386: F1 \n");
11716 printf("\\Kansif02 Transmit SCOANSI/AT386: F2 \n");
11719 printf("\\Kansif03 Transmit SCOANSI/AT386: F3 \n");
11722 printf("\\Kansif04 Transmit SCOANSI/AT386: F4 \n");
11725 printf("\\Kansif05 Transmit SCOANSI/AT386: F5 \n");
11728 printf("\\Kansif06 Transmit SCOANSI/AT386: F6 \n");
11731 printf("\\Kansif07 Transmit SCOANSI/AT386: F7 \n");
11734 printf("\\Kansif08 Transmit SCOANSI/AT386: F8 \n");
11737 printf("\\Kansif09 Transmit SCOANSI/AT386: F9 \n");
11740 printf("\\Kansif10 Transmit SCOANSI/AT386: F10\n");
11743 printf("\\Kansif11 Transmit SCOANSI/AT386: F11\n");
11746 printf("\\Kansif12 Transmit SCOANSI/AT386: F12\n");
11749 printf("\\Kansif13 Transmit SCOANSI/AT386: Shift-F1 \n");
11752 printf("\\Kansif14 Transmit SCOANSI/AT386: Shift-F2 \n");
11755 printf("\\Kansif15 Transmit SCOANSI/AT386: Shift-F3 \n");
11758 printf("\\Kansif16 Transmit SCOANSI/AT386: Shift-F4 \n");
11761 printf("\\Kansif17 Transmit SCOANSI/AT386: Shift-F5 \n");
11764 printf("\\Kansif18 Transmit SCOANSI/AT386: Shift-F6 \n");
11767 printf("\\Kansif19 Transmit SCOANSI/AT386: Shift-F7 \n");
11770 printf("\\Kansif20 Transmit SCOANSI/AT386: Shift-F8 \n");
11773 printf("\\Kansif21 Transmit SCOANSI/AT386: Shift-F9 \n");
11776 printf("\\Kansif22 Transmit SCOANSI/AT386: Shift-F10\n");
11779 printf("\\Kansif23 Transmit SCOANSI/AT386: Shift-F11\n");
11782 printf("\\Kansif24 Transmit SCOANSI/AT386: Shift-F12\n");
11785 printf("\\Kansif25 Transmit SCOANSI/AT386: Ctrl-F1 \n");
11788 printf("\\Kansif26 Transmit SCOANSI/AT386: Ctrl-F2 \n");
11791 printf("\\Kansif27 Transmit SCOANSI/AT386: Ctrl-F3 \n");
11794 printf("\\Kansif28 Transmit SCOANSI/AT386: Ctrl-F4 \n");
11797 printf("\\Kansif29 Transmit SCOANSI/AT386: Ctrl-F5 \n");
11800 printf("\\Kansif30 Transmit SCOANSI/AT386: Ctrl-F6 \n");
11803 printf("\\Kansif31 Transmit SCOANSI/AT386: Ctrl-F7 \n");
11806 printf("\\Kansif32 Transmit SCOANSI/AT386: Ctrl-F8 \n");
11809 printf("\\Kansif33 Transmit SCOANSI/AT386: Ctrl-F9 \n");
11812 printf("\\Kansif34 Transmit SCOANSI/AT386: Ctrl-F10\n");
11815 printf("\\Kansif35 Transmit SCOANSI/AT386: Ctrl-F11\n");
11818 printf("\\Kansif36 Transmit SCOANSI/AT386: Ctrl-F12\n");
11821 printf("\\Kansif37 Transmit SCOANSI/AT386: Ctrl-Shift-F1 \n");
11824 printf("\\Kansif38 Transmit SCOANSI/AT386: Ctrl-Shift-F2 \n");
11827 printf("\\Kansif39 Transmit SCOANSI/AT386: Ctrl-Shift-F3 \n");
11830 printf("\\Kansif40 Transmit SCOANSI/AT386: Ctrl-Shift-F4 \n");
11833 printf("\\Kansif41 Transmit SCOANSI/AT386: Ctrl-Shift-F5 \n");
11836 printf("\\Kansif42 Transmit SCOANSI/AT386: Ctrl-Shift-F6 \n");
11839 printf("\\Kansif43 Transmit SCOANSI/AT386: Ctrl-Shift-F7 \n");
11842 printf("\\Kansif44 Transmit SCOANSI/AT386: Ctrl-Shift-F8 \n");
11845 printf("\\Kansif45 Transmit SCOANSI/AT386: Ctrl-Shift-F9 \n");
11848 printf("\\Kansif46 Transmit SCOANSI/AT386: Ctrl-Shift-F10\n");
11851 printf("\\Kansif47 Transmit SCOANSI/AT386: Ctrl-Shift-F11\n");
11854 printf("\\Kansif48 Transmit SCOANSI/AT386: Ctrl-Shift-F12\n");
11857 printf("\\Kansif49 Transmit SCOANSI/AT386: Home\n");
11860 printf("\\Kansif50 Transmit SCOANSI/AT386: Up Arrow\n");
11863 printf("\\Kansif51 Transmit SCOANSI/AT386: PgUp\n");
11866 printf("\\Kansif52 Transmit SCOANSI/AT386: Ctrl-Shift-Subtract\n");
11869 printf("\\Kansif53 Transmit SCOANSI/AT386: Left Arrow\n");
11872 printf("\\Kansif54 Transmit SCOANSI/AT386: Clear\n");
11875 printf("\\Kansif55 Transmit SCOANSI/AT386: Right Arrow\n");
11878 printf("\\Kansif56 Transmit SCOANSI/AT386: Shift-Add\n");
11881 printf("\\Kansif57 Transmit SCOANSI/AT386: End\n");
11884 printf("\\Kansif58 Transmit SCOANSI/AT386: Down Arrow\n");
11887 printf("\\Kansif59 Transmit SCOANSI/AT386: PgDn\n");
11890 printf("\\Kansif60 Transmit SCOANSI/AT386: Insert\n");
11893 printf("\\Kansif61 Transmit SCOANSI/AT386: (not named)\n");
11896 /* WYSE Function Keys (unshifted) */
11898 printf("\\Kwyf01 Transmit WYSE 30/50/60/160: F1\n");
11901 printf("\\Kwyf02 Transmit WYSE 30/50/60/160: F2\n");
11904 printf("\\Kwyf03 Transmit WYSE 30/50/60/160: F3\n");
11907 printf("\\Kwyf04 Transmit WYSE 30/50/60/160: F4\n");
11910 printf("\\Kwyf05 Transmit WYSE 30/50/60/160: F5\n");
11913 printf("\\Kwyf06 Transmit WYSE 30/50/60/160: F6\n");
11916 printf("\\Kwyf07 Transmit WYSE 30/50/60/160: F7\n");
11919 printf("\\Kwyf08 Transmit WYSE 30/50/60/160: F8\n");
11922 printf("\\Kwyf09 Transmit WYSE 30/50/60/160: F9\n");
11925 printf("\\Kwyf10 Transmit WYSE 30/50/60/160: F10\n");
11928 printf("\\Kwyf11 Transmit WYSE 30/50/60/160: F11\n");
11931 printf("\\Kwyf12 Transmit WYSE 30/50/60/160: F12\n");
11934 printf("\\Kwyf13 Transmit WYSE 30/50/60/160: F13\n");
11937 printf("\\Kwyf14 Transmit WYSE 30/50/60/160: F14\n");
11940 printf("\\Kwyf15 Transmit WYSE 30/50/60/160: F15\n");
11943 printf("\\Kwyf16 Transmit WYSE 30/50/60/160: F16\n");
11946 printf("\\Kwyf17 Transmit WYSE 30/50/60/160: F17\n");
11949 printf("\\Kwyf18 Transmit WYSE 30/50/60/160: F18\n");
11952 printf("\\Kwyf19 Transmit WYSE 30/50/60/160: F19\n");
11955 printf("\\Kwyf20 Transmit WYSE 30/50/60/160: F20\n");
11958 /* WYSE Function Keys (shifted) */
11960 printf("\\Kwysf01 Transmit WYSE 30/50/60/160: Shift-F1\n");
11963 printf("\\Kwysf02 Transmit WYSE 30/50/60/160: Shift-F2\n");
11966 printf("\\Kwysf03 Transmit WYSE 30/50/60/160: Shift-F3\n");
11969 printf("\\Kwysf04 Transmit WYSE 30/50/60/160: Shift-F4\n");
11972 printf("\\Kwysf05 Transmit WYSE 30/50/60/160: Shift-F5\n");
11975 printf("\\Kwysf06 Transmit WYSE 30/50/60/160: Shift-F6\n");
11978 printf("\\Kwysf07 Transmit WYSE 30/50/60/160: Shift-F7\n");
11981 printf("\\Kwysf08 Transmit WYSE 30/50/60/160: Shift-F8\n");
11984 printf("\\Kwysf09 Transmit WYSE 30/50/60/160: Shift-F9\n");
11987 printf("\\Kwysf10 Transmit WYSE 30/50/60/160: Shift-F10\n");
11990 printf("\\Kwysf11 Transmit WYSE 30/50/60/160: Shift-F11\n");
11993 printf("\\Kwysf12 Transmit WYSE 30/50/60/160: Shift-F12\n");
11996 printf("\\Kwysf13 Transmit WYSE 30/50/60/160: Shift-F13\n");
11999 printf("\\Kwysf14 Transmit WYSE 30/50/60/160: Shift-F14\n");
12002 printf("\\Kwysf15 Transmit WYSE 30/50/60/160: Shift-F15\n");
12005 printf("\\Kwysf16 Transmit WYSE 30/50/60/160: Shift-F16\n");
12008 printf("\\Kwysf17 Transmit WYSE 30/50/60/160: Shift-F17\n");
12011 printf("\\Kwysf18 Transmit WYSE 30/50/60/160: Shift-F18\n");
12014 printf("\\Kwysf19 Transmit WYSE 30/50/60/160: Shift-F19\n");
12017 printf("\\Kwysf20 Transmit WYSE 30/50/60/160: Shift-F20\n");
12020 /* WYSE Edit and Special Keys */
12022 printf("\\Kwybs Transmit WYSE 30/50/60/160: Backspace\n");
12025 printf("\\Kwyclrln Transmit WYSE 30/50/60/160: Clear Line\n");
12028 printf("\\Kwysclrln Transmit WYSE 30/50/60/160: Shift-Clear Line\n");
12031 printf("\\Kwyclrpg Transmit WYSE 30/50/60/160: Clear Page\n");
12034 printf("\\Kwysclrpg Transmit WYSE 30/50/60/160: Shift-Clear Page\n");
12037 printf("\\Kwydelchar Transmit WYSE 30/50/60/160: Delete Char\n");
12040 printf("\\Kwydelln Transmit WYSE 30/50/60/160: Delete Line\n");
12043 printf("\\Kwyenter Transmit WYSE 30/50/60/160: Enter\n");
12046 printf("\\Kwyesc Transmit WYSE 30/50/60/160: Esc\n");
12049 printf("\\Kwyhome Transmit WYSE 30/50/60/160: Home\n");
12052 printf("\\Kwyshome Transmit WYSE 30/50/60/160: Shift-Home\n");
12055 printf("\\Kwyinsert Transmit WYSE 30/50/60/160: Insert\n");
12058 printf("\\Kwyinschar Transmit WYSE 30/50/60/160: Insert Char\n");
12061 printf("\\Kwyinsln Transmit WYSE 30/50/60/160: Insert Line\n");
12064 printf("\\Kwypgnext Transmit WYSE 30/50/60/160: Page Next\n");
12067 printf("\\Kwypgprev Transmit WYSE 30/50/60/160: Page Previous\n");
12070 printf("\\Kwyreplace Transmit WYSE 30/50/60/160: Replace \n");
12073 printf("\\Kwyreturn Transmit WYSE 30/50/60/160: Return \n");
12076 printf("\\Kwytab Transmit WYSE 30/50/60/160: Tab \n");
12079 printf("\\Kwystab Transmit WYSE 30/50/60/160: Shift-Tab \n");
12082 printf("\\Kwyprtscn Transmit WYSE 30/50/60/160: Print Screen \n");
12085 printf("\\Kwysesc Transmit WYSE 30/50/60/160: Shift-Esc \n");
12088 printf("\\Kwysbs Transmit WYSE 30/50/60/160: Shift-Backspace\n");
12091 printf("\\Kwysenter Transmit WYSE 30/50/60/160: Shift-Enter\n");
12094 printf("\\Kwysreturn Transmit WYSE 30/50/60/160: Shift-Return\n");
12097 printf("\\Kwyuparr Transmit WYSE 30/50/60/160: Up Arrow\n");
12100 printf("\\Kwydnarr Transmit WYSE 30/50/60/160: Down Arrow\n");
12103 printf("\\Kwylfarr Transmit WYSE 30/50/60/160: Left Arrow\n");
12106 printf("\\Kwyrtarr Transmit WYSE 30/50/60/160: Right Arrow\n");
12109 printf("\\Kwysuparr Transmit WYSE 30/50/60/160: Shift-Up Arrow\n");
12112 printf("\\Kwysdnarr Transmit WYSE 30/50/60/160: Shift-Down Arrow\n");
12115 printf("\\Kwyslfarr Transmit WYSE 30/50/60/160: Shift-Left Arrow\n");
12118 printf("\\Kwysrtarr Transmit WYSE 30/50/60/160: Shift-Right Arrow\n");
12121 printf("\\Kwysend Transmit WYSE 30/50/60/160: Send\n");
12124 printf("\\Kwyssend Transmit WYSE 30/50/60/160: Shift-Send\n");
12127 /* Data General Function Keys (unshifted) */
12129 printf("\\Kdgf01 Transmit Data General: F1 \n");
12132 printf("\\Kdgf01 Transmit Data General: F2 \n");
12135 printf("\\Kdgf01 Transmit Data General: F3 \n");
12138 printf("\\Kdgf01 Transmit Data General: F4 \n");
12141 printf("\\Kdgf01 Transmit Data General: F5 \n");
12144 printf("\\Kdgf01 Transmit Data General: F6 \n");
12147 printf("\\Kdgf01 Transmit Data General: F7 \n");
12150 printf("\\Kdgf01 Transmit Data General: F8 \n");
12153 printf("\\Kdgf01 Transmit Data General: F9 \n");
12156 printf("\\Kdgf01 Transmit Data General: F10 \n");
12159 printf("\\Kdgf01 Transmit Data General: F11 \n");
12162 printf("\\Kdgf01 Transmit Data General: F12 \n");
12165 printf("\\Kdgf01 Transmit Data General: F13 \n");
12168 printf("\\Kdgf01 Transmit Data General: F14 \n");
12171 printf("\\Kdgf01 Transmit Data General: F15 \n");
12174 /* Data General Function Keys (shifted) */
12177 "\\Kdgsf01 Transmit Data General: Shift-F1 \n");
12181 "\\Kdgsf02 Transmit Data General: Shift-F2 \n");
12185 "\\Kdgsf03 Transmit Data General: Shift-F3 \n");
12189 "\\Kdgsf04 Transmit Data General: Shift-F4 \n");
12193 "\\Kdgsf05 Transmit Data General: Shift-F5 \n");
12197 "\\Kdgsf06 Transmit Data General: Shift-F6 \n");
12201 "\\Kdgsf07 Transmit Data General: Shift-F7 \n");
12205 "\\Kdgsf08 Transmit Data General: Shift-F8 \n");
12209 "\\Kdgsf09 Transmit Data General: Shift-F9 \n");
12213 "\\Kdgsf10 Transmit Data General: Shift-F10 \n");
12217 "\\Kdgsf11 Transmit Data General: Shift-F11 \n");
12221 "\\Kdgsf12 Transmit Data General: Shift-F12 \n");
12225 "\\Kdgsf13 Transmit Data General: Shift-F13 \n");
12229 "\\Kdgsf14 Transmit Data General: Shift-F14 \n");
12233 "\\Kdgsf15 Transmit Data General: Shift-F15 \n");
12236 /* Data General Function Keys (control) */
12239 "\\Kdgcf01 Transmit Data General: Ctrl-F1 \n");
12243 "\\Kdgcf02 Transmit Data General: Ctrl-F2 \n");
12247 "\\Kdgcf03 Transmit Data General: Ctrl-F3 \n");
12251 "\\Kdgcf04 Transmit Data General: Ctrl-F4 \n");
12255 "\\Kdgcf05 Transmit Data General: Ctrl-F5 \n");
12259 "\\Kdgcf06 Transmit Data General: Ctrl-F6 \n");
12263 "\\Kdgcf07 Transmit Data General: Ctrl-F7 \n");
12267 "\\Kdgcf08 Transmit Data General: Ctrl-F8 \n");
12271 "\\Kdgcf09 Transmit Data General: Ctrl-F9 \n");
12275 "\\Kdgcf10 Transmit Data General: Ctrl-F10 \n");
12279 "\\Kdgcf11 Transmit Data General: Ctrl-F11 \n");
12283 "\\Kdgcf12 Transmit Data General: Ctrl-F12 \n");
12287 "\\Kdgcf13 Transmit Data General: Ctrl-F13 \n");
12291 "\\Kdgcf14 Transmit Data General: Ctrl-F14 \n");
12295 "\\Kdgcf15 Transmit Data General: Ctrl-F15 \n");
12298 /* Data General Function Keys (control shifted) */
12301 "\\Kdgcsf01 Transmit Data General: Ctrl-Shift-F1 \n");
12305 "\\Kdgcsf02 Transmit Data General: Ctrl-Shift-F2 \n");
12309 "\\Kdgcsf03 Transmit Data General: Ctrl-Shift-F3 \n");
12313 "\\Kdgcsf04 Transmit Data General: Ctrl-Shift-F4 \n");
12317 "\\Kdgcsf05 Transmit Data General: Ctrl-Shift-F5 \n");
12321 "\\Kdgcsf06 Transmit Data General: Ctrl-Shift-F6 \n");
12325 "\\Kdgcsf07 Transmit Data General: Ctrl-Shift-F7 \n");
12329 "\\Kdgcsf08 Transmit Data General: Ctrl-Shift-F8 \n");
12333 "\\Kdgcsf09 Transmit Data General: Ctrl-Shift-F9 \n");
12337 "\\Kdgcsf10 Transmit Data General: Ctrl-Shift-F10 \n");
12341 "\\Kdgcsf11 Transmit Data General: Ctrl-Shift-F11 \n");
12345 "\\Kdgcsf12 Transmit Data General: Ctrl-Shift-F12 \n");
12349 "\\Kdgcsf13 Transmit Data General: Ctrl-Shift-F13 \n");
12353 "\\Kdgcsf14 Transmit Data General: Ctrl-Shift-F14 \n");
12357 "\\Kdgcsf15 Transmit Data General: Ctrl-Shift-F15 \n");
12361 printf("\\Kdguparr Transmit Data General: Up Arrow \n");
12364 printf("\\Kdgdnarr Transmit Data General: Down Arrow \n");
12367 printf("\\Kdglfarr Transmit Data General: Left Arrow \n");
12370 printf("\\Kdgrtarr Transmit Data General: Right Arrow \n");
12373 printf("\\Kdgsuparr Transmit Data General: Shift-Up Arrow \n");
12376 printf("\\Kdgsdnarr Transmit Data General: Shift-Down Arrow \n");
12379 printf("\\Kdgslfarr Transmit Data General: Shift-Left Arrow \n");
12382 printf("\\Kdgsrtarr Transmit Data General: Shift-Right Arrow \n");
12385 case K_DGERASEPAGE :
12386 printf("\\Kdgerasepage Transmit Data General: Erase Page \n");
12389 printf("\\Kdgc1 Transmit Data General: C1 \n");
12392 printf("\\Kdgc2 Transmit Data General: C2 \n");
12394 case K_DGERASEEOL :
12395 printf("\\Kdgeraseeol Transmit Data General: Erase EOL \n");
12398 printf("\\Kdgc3 Transmit Data General: C3 \n");
12401 printf("\\Kdgc4 Transmit Data General: C4 \n");
12403 case K_DGCMDPRINT :
12404 printf("\\Kdgcmdprint Transmit Data General: Command Print \n");
12407 printf("\\Kdghome Transmit Data General: Home \n");
12409 case K_DGSERASEPAGE :
12410 printf("\\Kdgserasepage Transmit Data General: Erase Page \n");
12413 printf("\\Kdgsc1 Transmit Data General: Shift-C1 \n");
12416 printf("\\Kdgsc2 Transmit Data General: Shift-C2 \n");
12418 case K_DGSERASEEOL :
12419 printf("\\Kdgseraseeol Transmit Data General: Shift-Erase EOL \n");
12422 printf("\\Kdgsc3 Transmit Data General: Shift-C3 \n");
12425 printf("\\Kdgsc4 Transmit Data General: Shift-C4 \n");
12427 case K_DGSCMDPRINT :
12428 printf("\\Kdgscmdprint Transmit Data General: Shift-Command Print\n");
12431 printf("\\Kdgbs Transmit Data General: Backspace \n");
12434 printf("\\Kdshome Transmit Data General: Shift-Home \n");
12438 /* Televideo Function Keys (unshifted) */
12440 printf("\\Ktvif01 Transmit Televideo: F1 \n");
12443 printf("\\Ktvif02 Transmit Televideo: F2 \n");
12446 printf("\\Ktvif03 Transmit Televideo: F3 \n");
12449 printf("\\Ktvif04 Transmit Televideo: F4 \n");
12452 printf("\\Ktvif05 Transmit Televideo: F5 \n");
12455 printf("\\Ktvif06 Transmit Televideo: F6 \n");
12458 printf("\\Ktvif07 Transmit Televideo: F7 \n");
12461 printf("\\Ktvif08 Transmit Televideo: F8 \n");
12464 printf("\\Ktvif09 Transmit Televideo: F9 \n");
12467 printf("\\Ktvif10 Transmit Televideo: F10 \n");
12470 printf("\\Ktvif11 Transmit Televideo: F11 \n");
12473 printf("\\Ktvif12 Transmit Televideo: F12 \n");
12476 printf("\\Ktvif13 Transmit Televideo: F13 \n");
12479 printf("\\Ktvif14 Transmit Televideo: F14 \n");
12482 printf("\\Ktvif15 Transmit Televideo: F15 \n");
12485 printf("\\Ktvif16 Transmit Televideo: F16 \n");
12488 /* Televideo Function Keys (shifted) */
12490 printf("\\Ktvisf01 Transmit Televideo: Shift-F1 \n");
12493 printf("\\Ktvisf02 Transmit Televideo: Shift-F2 \n");
12496 printf("\\Ktvisf03 Transmit Televideo: Shift-F3 \n");
12499 printf("\\Ktvisf04 Transmit Televideo: Shift-F4 \n");
12502 printf("\\Ktvisf05 Transmit Televideo: Shift-F5 \n");
12505 printf("\\Ktvisf06 Transmit Televideo: Shift-F6 \n");
12508 printf("\\Ktvisf07 Transmit Televideo: Shift-F7 \n");
12511 printf("\\Ktvisf08 Transmit Televideo: Shift-F8 \n");
12514 printf("\\Ktvisf09 Transmit Televideo: Shift-F9 \n");
12517 printf("\\Ktvisf10 Transmit Televideo: Shift-F10\n");
12520 printf("\\Ktvisf11 Transmit Televideo: Shift-F11\n");
12523 printf("\\Ktvisf12 Transmit Televideo: Shift-F12\n");
12526 printf("\\Ktvisf13 Transmit Televideo: Shift-F13\n");
12529 printf("\\Ktvisf14 Transmit Televideo: Shift-F14\n");
12532 printf("\\Ktvisf15 Transmit Televideo: Shift-F15\n");
12535 printf("\\Ktvisf16 Transmit Televideo: Shift-F16\n");
12538 /* Televideo Edit and Special Keys */
12540 printf("\\Ktvibs Transmit Televideo: Backspace \n");
12543 printf("\\Ktviclrln Transmit Televideo: Clear Line \n");
12546 printf("\\Ktvisclrln Transmit Televideo: Shift-Clear Line\n");
12549 printf("\\Ktviclrpg Transmit Televideo: Clear Page \n");
12552 printf("\\Ktvisclrpg Transmit Televideo: Shift-Clear Page\n");
12554 case K_TVIDELCHAR :
12555 printf("\\Ktvidelchar Transmit Televideo: Delete Char \n");
12558 printf("\\Ktvidelln Transmit Televideo: Delete Line \n");
12561 printf("\\Ktvienter Transmit Televideo: Enter \n");
12564 printf("\\Ktviesc Transmit Televideo: Esc \n");
12567 printf("\\Ktvihome Transmit Televideo: Home \n");
12570 printf("\\Ktvishome Transmit Televideo: Shift-Home \n");
12573 printf("\\Ktviinsert Transmit Televideo: Insert \n");
12575 case K_TVIINSCHAR :
12576 printf("\\Ktviinschar Transmit Televideo: Insert Char \n");
12579 printf("\\Ktviinsln Transmit Televideo: Insert Line \n");
12582 printf("\\Ktvipgnext Transmit Televideo: Page Next \n");
12585 printf("\\Ktvipgprev Transmit Televideo: Page Previous \n");
12587 case K_TVIREPLACE :
12588 printf("\\Ktvireplace Transmit Televideo: Replace \n");
12591 printf("\\Ktvireturn Transmit Televideo: Return \n");
12594 printf("\\Ktvitab Transmit Televideo: Tab \n");
12597 printf("\\Ktvistab Transmit Televideo: Shift-Tab \n");
12600 printf("\\Ktviprtscn Transmit Televideo: Print Screen \n");
12603 printf("\\Ktvisesc Transmit Televideo: Shift-Esc \n");
12606 printf("\\Ktvisbs Transmit Televideo: Shift-Backspace \n");
12609 printf("\\Ktvisenter Transmit Televideo: Shift-Enter \n");
12611 case K_TVISRETURN :
12612 printf("\\Ktvisreturn Transmit Televideo: Shift-Return \n");
12615 printf("\\Ktviuparr Transmit Televideo: Up Arrow \n");
12618 printf("\\Ktvidnarr Transmit Televideo: Down Arrow \n");
12621 printf("\\Ktvilfarr Transmit Televideo: Left Arrow \n");
12624 printf("\\Ktvirtarr Transmit Televideo: Right Arrow \n");
12627 printf("\\Ktvisuparr Transmit Televideo: Shift-Up Arrow \n");
12630 printf("\\Ktvisdnarr Transmit Televideo: Shift-Down Arrow\n");
12633 printf("\\Ktvislfarr Transmit Televideo: Shift-Left Arrow\n");
12636 printf("\\Ktvisrtarr Transmit Televideo: Shift-Right Arrow\n");
12639 printf("\\Ktvisend Transmit Televideo: Send\n");
12642 printf("\\Ktvissend Transmit Televideo: Shift-Send\n");
12645 /* HP Function and Edit keys */
12647 printf("\\Khpf01 Transmit Hewlett-Packard: F1 \n");
12650 printf("\\Khpf02 Transmit Hewlett-Packard: F2 \n");
12653 printf("\\Khpf03 Transmit Hewlett-Packard: F3 \n");
12656 printf("\\Khpf04 Transmit Hewlett-Packard: F4 \n");
12659 printf("\\Khpf05 Transmit Hewlett-Packard: F5 \n");
12662 printf("\\Khpf06 Transmit Hewlett-Packard: F6 \n");
12665 printf("\\Khpf07 Transmit Hewlett-Packard: F7 \n");
12668 printf("\\Khpf08 Transmit Hewlett-Packard: F8 \n");
12671 printf("\\Khpf09 Transmit Hewlett-Packard: F9 \n");
12674 printf("\\Khpf10 Transmit Hewlett-Packard: F10 \n");
12677 printf("\\Khpf11 Transmit Hewlett-Packard: F11 \n");
12680 printf("\\Khpf12 Transmit Hewlett-Packard: F12 \n");
12683 printf("\\Khpf13 Transmit Hewlett-Packard: F13 \n");
12686 printf("\\Khpf14 Transmit Hewlett-Packard: F14 \n");
12689 printf("\\Khpf15 Transmit Hewlett-Packard: F15 \n");
12692 printf("\\Khpf16 Transmit Hewlett-Packard: F16 \n");
12695 printf("\\Khpreturn Transmit Hewlett-Packard: Return\n");
12698 printf("\\Khpenter Transmit Hewlett-Packard: Enter (keypad)\n");
12701 printf("\\Khpbacktab Transmit Hewlett-Packard: Back Tab\n");
12703 /* Siemens Nixdorf International 97801-5xx kverbs */
12704 case K_SNI_DOUBLE_0 :
12705 printf("\\Ksni_00 Transmit SNI-97801-5xx: Double-Zero\n");
12707 case K_SNI_C_DOUBLE_0 :
12709 "\\Ksni_c_00 Transmit SNI-97801-5xx: Ctrl-Double-Zero\n");
12712 printf("\\Ksni_c_ce Transmit SNI-97801-5xx: Ctrl-CE\n");
12714 case K_SNI_C_COMPOSE :
12715 printf("\\Ksni_c_compose Transmit SNI-97801-5xx: Ctrl-Compose\n");
12717 case K_SNI_C_DELETE_CHAR :
12719 "\\Ksni_c_del_char Transmit SNI-97801-5xx: Ctrl-Delete Char\n");
12721 case K_SNI_C_DELETE_LINE :
12723 "\\Ksni_c_del_line Transmit SNI-97801-5xx: Ctrl-Delete Line\n");
12725 case K_SNI_C_DELETE_WORD :
12727 "\\Ksni_c_del_word Transmit SNI-97801-5xx: Ctrl-Delete Word\n");
12729 case K_SNI_C_CURSOR_DOWN :
12731 "\\Ksni_c_dnarr Transmit SNI-97801-5xx: Ctrl-Cursor Down\n");
12733 case K_SNI_C_ENDMARKE :
12734 printf("\\Ksni_c_endmarke Transmit SNI-97801-5xx: Ctrl-End Marke\n");
12737 printf("\\Ksni_c_f01 Transmit SNI-97801-5xx: Ctrl-F1\n");
12740 printf("\\Ksni_c_f02 Transmit SNI-97801-5xx: Ctrl-F2\n");
12743 printf("\\Ksni_c_f03 Transmit SNI-97801-5xx: Ctrl-F3\n");
12746 printf("\\Ksni_c_f04 Transmit SNI-97801-5xx: Ctrl-F4\n");
12749 printf("\\Ksni_c_f05 Transmit SNI-97801-5xx: Ctrl-F5\n");
12752 printf("\\Ksni_c_f06 Transmit SNI-97801-5xx: Ctrl-F6\n");
12755 printf("\\Ksni_c_f07 Transmit SNI-97801-5xx: Ctrl-F7\n");
12758 printf("\\Ksni_c_f08 Transmit SNI-97801-5xx: Ctrl-F8\n");
12761 printf("\\Ksni_c_f09 Transmit SNI-97801-5xx: Ctrl-F9\n");
12764 printf("\\Ksni_c_f10 Transmit SNI-97801-5xx: Ctrl-F10\n");
12767 printf("\\Ksni_c_f11 Transmit SNI-97801-5xx: Ctrl-F11\n");
12770 printf("\\Ksni_c_f12 Transmit SNI-97801-5xx: Ctrl-F12\n");
12773 printf("\\Ksni_c_f13 Transmit SNI-97801-5xx: Ctrl-F13\n");
12776 printf("\\Ksni_c_f14 Transmit SNI-97801-5xx: Ctrl-F14\n");
12779 printf("\\Ksni_c_f15 Transmit SNI-97801-5xx: Ctrl-F15\n");
12782 printf("\\Ksni_c_f16 Transmit SNI-97801-5xx: Ctrl-F16\n");
12785 printf("\\Ksni_c_f17 Transmit SNI-97801-5xx: Ctrl-F17\n");
12788 printf("\\Ksni_c_f18 Transmit SNI-97801-5xx: Ctrl-F18\n");
12790 case K_SNI_C_USER1 :
12792 "\\Ksni_c_user1 Transmit SNI-97801-5xx: Ctrl-Key below F18\n");
12795 printf("\\Ksni_c_f19 Transmit SNI-97801-5xx: Ctrl-F19\n");
12797 case K_SNI_C_USER2 :
12799 "\\Ksni_c_user2 Transmit SNI-97801-5xx: Ctrl-Key below F19\n");
12802 printf("\\Ksni_c_f20 Transmit SNI-97801-5xx: Ctrl-F20\n");
12804 case K_SNI_C_USER3 :
12806 "\\Ksni_c_user3 Transmit SNI-97801-5xx: Ctrl-Key below F20\n");
12809 printf("\\Ksni_c_f21 Transmit SNI-97801-5xx: Ctrl-F21\n");
12811 case K_SNI_C_USER4 :
12813 "\\Ksni_c_user4 Transmit SNI-97801-5xx: Ctrl-Key below F21\n");
12816 printf("\\Ksni_c_f22 Transmit SNI-97801-5xx: Ctrl-F22\n");
12818 case K_SNI_C_USER5 :
12820 "\\Ksni_c_user5 Transmit SNI-97801-5xx: Ctrl-Key below F22\n");
12822 case K_SNI_C_HELP :
12823 printf("\\Ksni_c_help Transmit SNI-97801-5xx: Ctrl-Help\n");
12825 case K_SNI_C_HOME :
12826 printf("\\Ksni_c_home Transmit SNI-97801-5xx: Ctrl-Home\n");
12828 case K_SNI_C_INSERT_CHAR :
12830 "\\Ksni_c_ins_char Transmit SNI-97801-5xx: Ctrl-Insert Char\n");
12832 case K_SNI_C_INSERT_LINE :
12834 "\\Ksni_c_ins_line Transmit SNI-97801-5xx: Ctrl-Insert Line\n");
12836 case K_SNI_C_INSERT_WORD :
12838 "\\Ksni_c_ins_word Transmit SNI-97801-5xx: Ctrl-Insert Word\n");
12840 case K_SNI_C_LEFT_TAB :
12841 printf("\\Ksni_c_left_tab Transmit SNI-97801-5xx: Ctrl-Left Tab\n");
12843 case K_SNI_C_CURSOR_LEFT :
12845 "\\Ksni_c_lfarr Transmit SNI-97801-5xx: Ctrl-Cursor Left\n");
12847 case K_SNI_C_MODE :
12848 printf("\\Ksni_c_mode Transmit SNI-97801-5xx: Ctrl-Mode\n");
12850 case K_SNI_C_PAGE :
12851 printf("\\Ksni_c_page Transmit SNI-97801-5xx: Ctrl-Page\n");
12853 case K_SNI_C_PRINT :
12854 printf("\\Ksni_c_print Transmit SNI-97801-5xx: Ctrl-Print\n");
12856 case K_SNI_C_CURSOR_RIGHT:
12858 "\\Ksni_c_rtarr Transmit SNI-97801-5xx: Ctrl-Cursor Right\n");
12860 case K_SNI_C_SCROLL_DOWN :
12862 "\\Ksni_c_scroll_dn Transmit SNI-97801-5xx: Ctrl-Scroll Down\n");
12864 case K_SNI_C_SCROLL_UP :
12865 printf("\\Ksni_c_scroll_up Transmit SNI-97801-5xx: Ctrl-Scroll Up\n");
12867 case K_SNI_C_START :
12868 printf("\\Ksni_c_start Transmit SNI-97801-5xx: Ctrl-Start\n");
12870 case K_SNI_C_CURSOR_UP :
12871 printf("\\Ksni_c_uparr Transmit SNI-97801-5xx: Ctrl-Cursor Up\n");
12874 printf("\\Ksni_c_tab Transmit SNI-97801-5xx: Ctrl-Tab\n");
12877 printf("\\Ksni_ce Transmit SNI-97801-5xx: CE\n");
12879 case K_SNI_CH_CODE:
12880 printf("\\Ksni_ch_code Toggle SNI-97801-5xx: CH.CODE function.\n");
12882 case K_SNI_COMPOSE :
12883 printf("\\Ksni_compose Transmit SNI-97801-5xx: Compose\n");
12885 case K_SNI_DELETE_CHAR :
12886 printf("\\Ksni_del_char Transmit SNI-97801-5xx: Delete Char\n");
12888 case K_SNI_DELETE_LINE :
12889 printf("\\Ksni_del_line Transmit SNI-97801-5xx: Delete Line\n");
12891 case K_SNI_DELETE_WORD :
12892 printf("\\Ksni_del_word Transmit SNI-97801-5xx: Delete Word\n");
12894 case K_SNI_CURSOR_DOWN :
12895 printf("\\Ksni_dnarr Transmit SNI-97801-5xx: Cursor Down\n");
12897 case K_SNI_ENDMARKE :
12898 printf("\\Ksni_endmarke Transmit SNI-97801-5xx: End Marke\n");
12901 printf("\\Ksni_f01 Transmit SNI-97801-5xx: F1\n");
12904 printf("\\Ksni_f02 Transmit SNI-97801-5xx: F2\n");
12907 printf("\\Ksni_f03 Transmit SNI-97801-5xx: F3\n");
12910 printf("\\Ksni_f04 Transmit SNI-97801-5xx: F4\n");
12913 printf("\\Ksni_f05 Transmit SNI-97801-5xx: F5\n");
12916 printf("\\Ksni_f06 Transmit SNI-97801-5xx: F6\n");
12919 printf("\\Ksni_f07 Transmit SNI-97801-5xx: F7\n");
12922 printf("\\Ksni_f08 Transmit SNI-97801-5xx: F8\n");
12925 printf("\\Ksni_f09 Transmit SNI-97801-5xx: F9\n");
12928 printf("\\Ksni_f10 Transmit SNI-97801-5xx: F10\n");
12931 printf("\\Ksni_f11 Transmit SNI-97801-5xx: F11\n");
12934 printf("\\Ksni_f12 Transmit SNI-97801-5xx: F12\n");
12937 printf("\\Ksni_f13 Transmit SNI-97801-5xx: F13\n");
12940 printf("\\Ksni_f14 Transmit SNI-97801-5xx: F14\n");
12943 printf("\\Ksni_f15 Transmit SNI-97801-5xx: F15\n");
12946 printf("\\Ksni_f16 Transmit SNI-97801-5xx: F16\n");
12949 printf("\\Ksni_f17 Transmit SNI-97801-5xx: F17\n");
12952 printf("\\Ksni_f18 Transmit SNI-97801-5xx: F18\n");
12955 printf("\\Ksni_user1 Transmit SNI-97801-5xx: Key below F18\n");
12958 printf("\\Ksni_f19 Transmit SNI-97801-5xx: F19\n");
12961 printf("\\Ksni_user2 Transmit SNI-97801-5xx: Key below F19\n");
12964 printf("\\Ksni_f20 Transmit SNI-97801-5xx: F20\n");
12967 printf("\\Ksni_user3 Transmit SNI-97801-5xx: Key below F20\n");
12970 printf("\\Ksni_f21 Transmit SNI-97801-5xx: F21\n");
12973 printf("\\Ksni_user4 Transmit SNI-97801-5xx: Key below F21\n");
12976 printf("\\Ksni_f22 Transmit SNI-97801-5xx: F22\n");
12979 printf("\\Ksni_user5 Transmit SNI-97801-5xx: Key below F22\n");
12982 printf("\\Ksni_help Transmit SNI-97801-5xx: Help\n");
12985 printf("\\Ksni_home Transmit SNI-97801-5xx: Home\n");
12987 case K_SNI_INSERT_CHAR :
12988 printf("\\Ksni_ins_char Transmit SNI-97801-5xx: Insert Char\n");
12990 case K_SNI_INSERT_LINE :
12991 printf("\\Ksni_ins_line Transmit SNI-97801-5xx: Insert Line\n");
12993 case K_SNI_INSERT_WORD :
12994 printf("\\Ksni_ins_word Transmit SNI-97801-5xx: Insert Word\n");
12996 case K_SNI_LEFT_TAB :
12997 printf("\\Ksni_left_tab Transmit SNI-97801-5xx: Left Tab\n");
12999 case K_SNI_CURSOR_LEFT :
13000 printf("\\Ksni_lfarr Transmit SNI-97801-5xx: Cursor Left\n");
13003 printf("\\Ksni_mode Transmit SNI-97801-5xx: Mode\n");
13006 printf("\\Ksni_page Transmit SNI-97801-5xx: Page\n");
13009 printf("\\Ksni_print Transmit SNI-97801-5xx: Print\n");
13011 case K_SNI_CURSOR_RIGHT :
13012 printf("\\Ksni_rtarr Transmit SNI-97801-5xx: Cursor Right\n");
13014 case K_SNI_S_DOUBLE_0 :
13016 "\\Ksni_s_00 Transmit SNI-97801-5xx: Shift-Double-Zero\n");
13019 printf("\\Ksni_s_ce Transmit SNI-97801-5xx: Shift-CE\n");
13021 case K_SNI_S_COMPOSE :
13022 printf("\\Ksni_s_compose Transmit SNI-97801-5xx: Shift-Compose\n");
13024 case K_SNI_S_DELETE_CHAR :
13026 "\\Ksni_s_del_char Transmit SNI-97801-5xx: Shift-Delete Char\n");
13028 case K_SNI_S_DELETE_LINE :
13030 "\\Ksni_s_del_line Transmit SNI-97801-5xx: Shift-Delete Line\n");
13032 case K_SNI_S_DELETE_WORD :
13034 "\\Ksni_s_del_word Transmit SNI-97801-5xx: Shift-Delete Word\n");
13036 case K_SNI_S_CURSOR_DOWN :
13038 "\\Ksni_s_dnarr Transmit SNI-97801-5xx: Shift-Cursor Down\n");
13040 case K_SNI_S_ENDMARKE :
13041 printf("\\Ksni_s_endmarke Transmit SNI-97801-5xx: Shift-End Marke\n");
13044 printf("\\Ksni_s_f01 Transmit SNI-97801-5xx: Shift-F1\n");
13047 printf("\\Ksni_s_f02 Transmit SNI-97801-5xx: Shift-F2\n");
13050 printf("\\Ksni_s_f03 Transmit SNI-97801-5xx: Shift-F3\n");
13053 printf("\\Ksni_s_f04 Transmit SNI-97801-5xx: Shift-F4\n");
13056 printf("\\Ksni_s_f05 Transmit SNI-97801-5xx: Shift-F5\n");
13059 printf("\\Ksni_s_f06 Transmit SNI-97801-5xx: Shift-F6\n");
13062 printf("\\Ksni_s_f07 Transmit SNI-97801-5xx: Shift-F7\n");
13065 printf("\\Ksni_s_f08 Transmit SNI-97801-5xx: Shift-F8\n");
13068 printf("\\Ksni_s_f09 Transmit SNI-97801-5xx: Shift-F9\n");
13071 printf("\\Ksni_s_f10 Transmit SNI-97801-5xx: Shift-F10\n");
13074 printf("\\Ksni_s_f11 Transmit SNI-97801-5xx: Shift-F11\n");
13077 printf("\\Ksni_s_f12 Transmit SNI-97801-5xx: Shift-F12\n");
13080 printf("\\Ksni_s_f13 Transmit SNI-97801-5xx: Shift-F13\n");
13083 printf("\\Ksni_s_f14 Transmit SNI-97801-5xx: Shift-F14\n");
13086 printf("\\Ksni_s_f15 Transmit SNI-97801-5xx: Shift-F15\n");
13089 printf("\\Ksni_s_f16 Transmit SNI-97801-5xx: Shift-F16\n");
13092 printf("\\Ksni_s_f17 Transmit SNI-97801-5xx: Shift-F17\n");
13095 printf("\\Ksni_s_f18 Transmit SNI-97801-5xx: Shift-F18\n");
13097 case K_SNI_S_USER1 :
13099 "\\Ksni_s_user1 Transmit SNI-97801-5xx: Shift-Key below F18\n");
13102 printf("\\Ksni_s_f19 Transmit SNI-97801-5xx: Shift-F19\n");
13104 case K_SNI_S_USER2 :
13106 "\\Ksni_s_user2 Transmit SNI-97801-5xx: Shift-Key below F19\n");
13109 printf("\\Ksni_s_f20 Transmit SNI-97801-5xx: Shift-F20\n");
13111 case K_SNI_S_USER3 :
13113 "\\Ksni_s_user3 Transmit SNI-97801-5xx: Shift-Key below F20\n");
13116 printf("\\Ksni_s_f21 Transmit SNI-97801-5xx: Shift-F21\n");
13118 case K_SNI_S_USER4 :
13120 "\\Ksni_s_user4 Transmit SNI-97801-5xx: Shift-Key below F21\n");
13123 printf("\\Ksni_s_f22 Transmit SNI-97801-5xx: Shift-F22\n");
13125 case K_SNI_S_USER5 :
13127 "\\Ksni_s_user5 Transmit SNI-97801-5xx: Shift-Key below F22\n");
13129 case K_SNI_S_HELP :
13130 printf("\\Ksni_s_help Transmit SNI-97801-5xx: Shift-Help\n");
13132 case K_SNI_S_HOME :
13133 printf("\\Ksni_s_home Transmit SNI-97801-5xx: Shift-Home\n");
13135 case K_SNI_S_INSERT_CHAR :
13137 "\\Ksni_s_ins_char Transmit SNI-97801-5xx: Shift-Insert Char\n");
13139 case K_SNI_S_INSERT_LINE :
13141 "\\Ksni_s_ins_line Transmit SNI-97801-5xx: Shift-Insert Line\n");
13143 case K_SNI_S_INSERT_WORD :
13145 "\\Ksni_s_ins_word Transmit SNI-97801-5xx: Shift-Insert Word\n");
13147 case K_SNI_S_LEFT_TAB :
13148 printf("\\Ksni_s_left_tab Transmit SNI-97801-5xx: Shift-Left Tab\n");
13150 case K_SNI_S_CURSOR_LEFT :
13152 "\\Ksni_s_lfarr Transmit SNI-97801-5xx: Shift-Cursor Left\n");
13154 case K_SNI_S_MODE :
13155 printf("\\Ksni_s_mode Transmit SNI-97801-5xx: Shift-Mode\n");
13157 case K_SNI_S_PAGE :
13158 printf("\\Ksni_s_page Transmit SNI-97801-5xx: Shift-Page\n");
13160 case K_SNI_S_PRINT :
13161 printf("\\Ksni_s_print Transmit SNI-97801-5xx: Shift-Print\n");
13163 case K_SNI_S_CURSOR_RIGHT:
13165 "\\Ksni_s_rtarr Transmit SNI-97801-5xx: Shift-Cursor Right\n");
13167 case K_SNI_S_SCROLL_DOWN :
13169 "\\Ksni_s_scroll_dn Transmit SNI-97801-5xx: Shift-Scroll Down\n");
13171 case K_SNI_S_SCROLL_UP :
13172 printf("\\Ksni_s_scroll_up Transmit SNI-97801-5xx: Shift-Scroll Up\n");
13174 case K_SNI_S_START :
13175 printf("\\Ksni_s_start Transmit SNI-97801-5xx: Shift-Start\n");
13177 case K_SNI_S_CURSOR_UP :
13178 printf("\\Ksni_s_uparr Transmit SNI-97801-5xx: Shift-Cursor Up\n");
13181 printf("\\Ksni_s_tab Transmit SNI-97801-5xx: Shift-Tab\n");
13183 case K_SNI_SCROLL_DOWN :
13184 printf("\\Ksni_scroll_dn Transmit SNI-97801-5xx: Scroll Down\n");
13186 case K_SNI_SCROLL_UP :
13187 printf("\\Ksni_scroll_up Transmit SNI-97801-5xx: Scroll Up\n");
13190 printf("\\Ksni_start Transmit SNI-97801-5xx: Start\n");
13193 printf("\\Ksni_tab Transmit SNI-97801-5xx: Tab\n");
13195 case K_SNI_CURSOR_UP :
13196 printf("\\Ksni_uparr Transmit SNI-97801-5xx: Cursor Up\n");
13200 printf("\\Kba80_attr Transmit BA80: Attr\n");
13203 printf("\\Kba80_c_key Transmit BA80: C\n");
13206 printf("\\Kba80_clear Transmit BA80: Clear\n");
13209 printf("\\Kba80_cmd Transmit BA80: Cmd\n");
13212 printf("\\Kba80_copy Transmit BA80: Copy\n");
13215 printf("\\Kba80_del Transmit BA80: Delete\n");
13218 printf("\\Kba80_del_b Transmit BA80: Delete B\n");
13221 printf("\\Kba80_do Transmit BA80: Do\n");
13224 printf("\\Kba80_end Transmit BA80: End\n");
13227 printf("\\Kba80_env Transmit BA80: Env\n");
13230 printf("\\Kba80_eop Transmit BA80: EOP\n");
13233 printf("\\Kba80_erase Transmit BA80: Erase\n");
13236 printf("\\Kba80_fmt Transmit BA80: Format\n");
13239 printf("\\Kba80_help Transmit BA80: Help\n");
13242 printf("\\Kba80_home Transmit BA80: Home\n");
13245 printf("\\Kba80_ins Transmit BA80: Insert\n");
13248 printf("\\Kba80_ins_b Transmit BA80: Insert B\n");
13251 printf("\\Kba80_mark Transmit BA80: Mark\n");
13254 printf("\\Kba80_move Transmit BA80: Move\n");
13257 printf("\\Kba80_pa01 Transmit BA80: PA1\n");
13260 printf("\\Kba80_pa02 Transmit BA80: PA2\n");
13263 printf("\\Kba80_pa03 Transmit BA80: PA3\n");
13266 printf("\\Kba80_pa04 Transmit BA80: PA4\n");
13269 printf("\\Kba80_pa05 Transmit BA80: PA5\n");
13272 printf("\\Kba80_pa06 Transmit BA80: PA6\n");
13275 printf("\\Kba80_pa07 Transmit BA80: PA7\n");
13278 printf("\\Kba80_pa08 Transmit BA80: PA8\n");
13281 printf("\\Kba80_pa09 Transmit BA80: PA9\n");
13284 printf("\\Kba80_pa10 Transmit BA80: PA10\n");
13287 printf("\\Kba80_pa11 Transmit BA80: PA11\n");
13290 printf("\\Kba80_pa12 Transmit BA80: PA12\n");
13293 printf("\\Kba80_pa13 Transmit BA80: PA13\n");
13296 printf("\\Kba80_pa14 Transmit BA80: PA14\n");
13299 printf("\\Kba80_pa15 Transmit BA80: PA15\n");
13302 printf("\\Kba80_pa16 Transmit BA80: PA16\n");
13305 printf("\\Kba80_pa17 Transmit BA80: PA17\n");
13308 printf("\\Kba80_pa18 Transmit BA80: PA18\n");
13311 printf("\\Kba80_pa19 Transmit BA80: PA19\n");
13314 printf("\\Kba80_pa20 Transmit BA80: PA20\n");
13317 printf("\\Kba80_pa21 Transmit BA80: PA21\n");
13320 printf("\\Kba80_pa22 Transmit BA80: PA22\n");
13323 printf("\\Kba80_pa23 Transmit BA80: PA23\n");
13326 printf("\\Kba80_pa24 Transmit BA80: PA24\n");
13329 printf("\\Kba80_pgdn Transmit BA80: Page Down\n");
13332 printf("\\Kba80_pgup Transmit BA80: Page Up\n");
13335 printf("\\Kba80_pick Transmit BA80: Pick\n");
13338 printf("\\Kba80_print Transmit BA80: Print\n");
13341 printf("\\Kba80_put Transmit BA80: Put\n");
13343 case K_BA80_REFRESH:
13344 printf("\\Kba80_refresh Transmit BA80: Refresh \n");
13347 printf("\\Kba80_reset Transmit BA80: Reset\n");
13349 case K_BA80_RUBOUT:
13350 printf("\\Kba80_rubout Transmit BA80: Rubout\n");
13353 printf("\\Kba80_save Transmit BA80: Save\n");
13355 case K_BA80_SOFTKEY1:
13356 printf("\\Kba80_softkey1 Transmit BA80: Softkey 1\n");
13358 case K_BA80_SOFTKEY2:
13359 printf("\\Kba80_softkey2 Transmit BA80: Softkey 2\n");
13361 case K_BA80_SOFTKEY3:
13362 printf("\\Kba80_softkey3 Transmit BA80: Softkey 3\n");
13364 case K_BA80_SOFTKEY4:
13365 printf("\\Kba80_softkey4 Transmit BA80: Softkey 4\n");
13367 case K_BA80_SOFTKEY5:
13368 printf("\\Kba80_softkey5 Transmit BA80: Softkey 5\n");
13370 case K_BA80_SOFTKEY6:
13371 printf("\\Kba80_softkey6 Transmit BA80: Softkey 6\n");
13373 case K_BA80_SOFTKEY7:
13374 printf("\\Kba80_softkey7 Transmit BA80: Softkey 7\n");
13376 case K_BA80_SOFTKEY8:
13377 printf("\\Kba80_softkey8 Transmit BA80: Softkey 8\n");
13379 case K_BA80_SOFTKEY9:
13380 printf("\\Kba80_softkey9 Transmit BA80: Softkey 9\n");
13383 printf("\\Kba80_undo Transmit BA80: Undo\n");
13387 printf("\\Ki31_f01 Transmit IBM 31xx: F1\n");
13390 printf("\\Ki31_f02 Transmit IBM 31xx: F2\n");
13393 printf("\\Ki31_f03 Transmit IBM 31xx: F3\n");
13396 printf("\\Ki31_f04 Transmit IBM 31xx: F4\n");
13399 printf("\\Ki31_f05 Transmit IBM 31xx: F5\n");
13402 printf("\\Ki31_f06 Transmit IBM 31xx: F6\n");
13405 printf("\\Ki31_f07 Transmit IBM 31xx: F7\n");
13408 printf("\\Ki31_f08 Transmit IBM 31xx: F8\n");
13411 printf("\\Ki31_f09 Transmit IBM 31xx: F9\n");
13414 printf("\\Ki31_f10 Transmit IBM 31xx: F10\n");
13417 printf("\\Ki31_f11 Transmit IBM 31xx: F11\n");
13420 printf("\\Ki31_f12 Transmit IBM 31xx: F12\n");
13423 printf("\\Ki31_f13 Transmit IBM 31xx: F13\n");
13426 printf("\\Ki31_f14 Transmit IBM 31xx: F14\n");
13429 printf("\\Ki31_f15 Transmit IBM 31xx: F15\n");
13432 printf("\\Ki31_f16 Transmit IBM 31xx: F16\n");
13435 printf("\\Ki31_f17 Transmit IBM 31xx: F17\n");
13438 printf("\\Ki31_f18 Transmit IBM 31xx: F18\n");
13441 printf("\\Ki31_f19 Transmit IBM 31xx: F19\n");
13444 printf("\\Ki31_f20 Transmit IBM 31xx: F20\n");
13447 printf("\\Ki31_f21 Transmit IBM 31xx: F21\n");
13450 printf("\\Ki31_f22 Transmit IBM 31xx: F22\n");
13453 printf("\\Ki31_f23 Transmit IBM 31xx: F23\n");
13456 printf("\\Ki31_f24 Transmit IBM 31xx: F24\n");
13459 printf("\\Ki31_f25 Transmit IBM 31xx: F25\n");
13462 printf("\\Ki31_f26 Transmit IBM 31xx: F26\n");
13465 printf("\\Ki31_f27 Transmit IBM 31xx: F27\n");
13468 printf("\\Ki31_f28 Transmit IBM 31xx: F28\n");
13471 printf("\\Ki31_f29 Transmit IBM 31xx: F29\n");
13474 printf("\\Ki31_f30 Transmit IBM 31xx: F30\n");
13477 printf("\\Ki31_f31 Transmit IBM 31xx: F31\n");
13480 printf("\\Ki31_f32 Transmit IBM 31xx: F32\n");
13483 printf("\\Ki31_f33 Transmit IBM 31xx: F33\n");
13486 printf("\\Ki31_f34 Transmit IBM 31xx: F34\n");
13489 printf("\\Ki31_f35 Transmit IBM 31xx: F35\n");
13492 printf("\\Ki31_f36 Transmit IBM 31xx: F36\n");
13495 printf("\\Ki31_pa1 Transmit IBM 31xx: PA1\n");
13498 printf("\\Ki31_pa2 Transmit IBM 31xx: PA2\n");
13501 printf("\\Ki31_pa3 Transmit IBM 31xx: PA3\n");
13504 printf("\\Ki31_reset Transmit IBM 31xx: Reset\n");
13507 printf("\\Ki31_jump Transmit IBM 31xx: Jump\n");
13510 printf("\\Ki31_clear Transmit IBM 31xx: Clear\n");
13512 case K_I31_ERASE_EOF:
13513 printf("\\Ki31_erase_eof Transmit IBM 31xx: Erase to End of Field\n");
13515 case K_I31_ERASE_EOP:
13516 printf("\\Ki31_eop Transmit IBM 31xx: Erase to End of Page\n");
13518 case K_I31_ERASE_INP:
13519 printf("\\Ki31_inp Transmit IBM 31xx: Erase Input Operation\n");
13521 case K_I31_INSERT_CHAR:
13522 printf("\\Ki31_ins_char Transmit IBM 31xx: Insert Character\n");
13524 case K_I31_INSERT_SPACE:
13525 printf("\\Ki31_ins_space Transmit IBM 31xx: Insert Space\n");
13528 printf("\\Ki31_delete Transmit IBM 31xx: Delete Character\n");
13531 printf("\\Ki31_ins_line Transmit IBM 31xx: Insert Line\n");
13534 printf("\\Ki31_del_ln Transmit IBM 31xx: Delete Line\n");
13536 case K_I31_PRINT_LINE:
13537 printf("\\Ki31_prt_line Transmit IBM 31xx: Print Line\n");
13539 case K_I31_PRINT_MSG:
13540 printf("\\Ki31_prt_msg Transmit IBM 31xx: Print Message\n");
13542 case K_I31_PRINT_SHIFT:
13543 printf("\\Ki31_prt_shift Transmit IBM 31xx: Print Shift\n");
13546 printf("\\Ki31_cancel Transmit IBM 31xx: Cancel\n");
13548 case K_I31_SEND_LINE:
13549 printf("\\Ki31_send_line Transmit IBM 31xx: Send Line\n");
13551 case K_I31_SEND_MSG:
13552 printf("\\Ki31_send_msg Transmit IBM 31xx: Send Message\n");
13554 case K_I31_SEND_PAGE:
13555 printf("\\Ki31_send_page Transmit IBM 31xx: Send Page\n");
13558 printf("\\Ki31_home Transmit IBM 31xx: Home\n");
13560 case K_I31_BACK_TAB:
13561 printf("\\Ki31_back_tab Transmit IBM 31xx: Back Tab\n");
13564 printf("\\Ksunstop Transmit SUN Console: Stop\n");
13567 printf("\\Ksunagain Transmit SUN Console: Again\n");
13570 printf("\\Ksunprops Transmit SUN Console: Props\n");
13573 printf("\\Ksunundo Transmit SUN Console: Undo\n");
13576 printf("\\Ksunfront Transmit SUN Console: Front\n");
13579 printf("\\Ksuncopy Transmit SUN Console: Copy\n");
13582 printf("\\Ksunopen Transmit SUN Console: Open\n");
13585 printf("\\Ksunpaste Transmit SUN Console: Paste\n");
13588 printf("\\Ksunfind Transmit SUN Console: Find\n");
13591 printf("\\Ksuncut Transmit SUN Console: Cut\n");
13594 printf("\\Ksunhelp Transmit SUN Console: Help\n");
13598 printf("No additional help available for this kverb\n");
13602 /* This is not the proper way to do it since it doesn't show */
13603 /* all emulations, nor does it show the special modes, but it */
13604 /* is better than nothing. */
13606 printf("Current bindings:\n");
13608 for (i = 256; i < KMSIZE ; i++) {
13609 con_event evt = mapkey(i);
13610 if (evt.type != kverb)
13612 if ((evt.kverb.id & ~F_KVERB) == xx) {
13614 printf(" \\%-4d - %s\n",i,keyname(i));
13618 for ( button = 0 ; button < MMBUTTONMAX ; button++ )
13619 for ( event = 0 ; event < MMEVENTSIZE ; event++ )
13620 if ( mousemap[button][event].type == kverb ) {
13621 if ( (mousemap[button][event].kverb.id & ~F_KVERB) == xx ) {
13623 printf(" Mouse - %s\n",mousename(button,event));
13626 #endif /* OS2MOUSE */
13629 printf(" (none)\n");
13633 #endif /* NOKVERBS */
13637 /* D O H R M T -- Give help about REMOTE command */
13639 static char *hrset[] = {
13640 "Syntax: REMOTE SET parameter value",
13641 "Example: REMOTE SET FILE TYPE BINARY",
13642 " Asks the Kermit server to set the named parameter to the given value.",
13643 " Equivalent to typing the corresponding SET command directly to the other",
13644 " Kermit if it were in interactive mode.", "" };
13647 dohrmt(xx) int xx; {
13649 if (xx == -3) return(hmsga(hmhrmt));
13650 if (xx < 0) return(xx);
13651 if ((x = cmcfm()) < 0) return(x);
13655 return(hmsg("Syntax: REMOTE COPY source destination\n\
13656 Asks the Kermit server to copy the source file to destination.\n\
13657 Synonym: RCOPY."));
13661 return(hmsg("Syntax: REMOTE CD [ name ]\n\
13662 Asks the Kermit or FTP server to change its working directory or device.\n\
13663 If the device or directory name is omitted, restore the default.\n\
13666 return(hmsg("Syntax: REMOTE CD [ name ]\n\
13667 Asks the Kermit server to change its working directory or device.\n\
13668 If the device or directory name is omitted, restore the default.\n\
13670 #endif /* NEWFTP */
13674 return(hmsg("Syntax: REMOTE DELETE filespec\n\
13675 Asks the Kermit or FTP server to delete the named file(s).\n\
13678 return(hmsg("Syntax: REMOTE DELETE filespec\n\
13679 Asks the Kermit server to delete the named file(s).\n\
13681 #endif /* NEWFTP */
13685 return(hmsg("Syntax: REMOTE MKDIR directory-name\n\
13686 Asks the Kermit or FTP server to create the named directory.\n\
13687 Synonym: RMKDIR."));
13689 return(hmsg("Syntax: REMOTE MKDIR directory-name\n\
13690 Asks the Kermit server to create the named directory.\n\
13691 Synonym: RMKDIR."));
13692 #endif /* NEWFTP */
13696 return(hmsg("Syntax: REMOTE RMDIR directory-name\n\
13697 Asks the Kermit or FTP server to remove the named directory.\n\
13698 Synonym: RRMDIR."));
13700 return(hmsg("Syntax: REMOTE RMDIR directory-name\n\
13701 Asks the Kermit server to remove the named directory.\n\
13702 Synonym: RRMDIR."));
13703 #endif /* NEWFTP */
13707 return(hmsg("Syntax: REMOTE DIRECTORY [ filespec ]\n\
13708 Asks the Kermit or FTP server to provide a directory listing of the named\n\
13709 file(s) or if no file specification is given, of all files in its current\n\
13710 directory. Synonym: RDIR."));
13712 return(hmsg("Syntax: REMOTE DIRECTORY [ filespec ]\n\
13713 Asks the Kermit server to provide a directory listing of the named\n\
13714 file(s) or if no file specification is given, of all files in its current\n\
13715 directory. Synonym: RDIR."));
13716 #endif /* NEWFTP */
13720 return(hmsg("Syntax: REMOTE HELP\n\
13721 Asks the Kermit or FTP server to list the services it provides.\n\
13722 Synonym: RHELP."));
13724 return(hmsg("Syntax: REMOTE HELP\n\
13725 Asks the Kermit server to list the services it provides.\n\
13726 Synonym: RHELP."));
13727 #endif /* NEWFTP */
13730 return(hmsg("Syntax: REMOTE HOST command\n\
13731 Sends a command to the other computer in its own command language\n\
13732 through the Kermit server that is running on that host. Synonym: RHOST."));
13736 return(hmsg("Syntax: REMOTE KERMIT command\n\
13737 Sends a command to the remote Kermit server in its own command language.\n\
13738 Synonym: RKERMIT."));
13741 return(hmsg("Syntax: REMOTE LOGIN user password [ account ]\n\
13742 Logs in to a remote Kermit server that requires you login. Note: RLOGIN\n\
13743 is NOT a synonym for REMOTE LOGIN."));
13746 return(hmsg("Syntax: REMOTE LOGOUT\n\
13747 Logs out from a remote Kermit server to which you have previously logged in."
13751 return(hmsg("Syntax: REMOTE PRINT filespec [ options ]\n\
13752 Sends the specified file(s) to the remote Kermit and ask it to have the\n\
13753 file printed on the remote system's printer, using any specified options.\n\
13754 Synonym: RPRINT."));
13755 #endif /* NOFRILLS */
13759 return(hmsg("Syntax: REMOTE RENAME filespec newname\n\
13760 Asks the Kermit or FTP server to rename the file. Synonym: RRENAME."));
13762 return(hmsg("Syntax: REMOTE RENAME filespec newname\n\
13763 Asks the Kermit server to rename the file. Synonym: RRENAME."));
13764 #endif /* NEWFTP */
13767 return(hmsga(hrset));
13770 return(hmsg("Syntax: REMOTE SPACE [ name ]\n\
13771 Asks the Kermit server to tell you about its disk space on the current\n\
13772 disk or directory, or in the one that you name. Synonym: RSPACE."));
13777 return(hmsg("Syntax: REMOTE TYPE file\n\
13778 Asks the Kermit or FTP server to send the named file to your screen.\n\
13779 Synonym: RTYPE."));
13781 return(hmsg("Syntax: REMOTE TYPE file\n\
13782 Asks the Kermit server to send the named file(s) to your screen.\n\
13783 Synonym: RTYPE."));
13784 #endif /* NEWFTP */
13788 return(hmsg("Syntax: REMOTE WHO [ name ]\n\
13789 Asks the Kermit server to list who's logged in, or to give information\n\
13790 about the named user. Synonym: RWHO."));
13791 #endif /* NOFRILLS */
13796 "Syntax: [ REMOTE ] QUERY { KERMIT, SYSTEM, USER } variable-name\n\
13797 Asks the Kermit server to send the value of the named variable of the\n\
13798 given type, and make it available in the \\v(query) variable. When the\n\
13799 type is KERMIT functions may also be specified as if they were variables."));
13803 "Syntax: REMOTE ASSIGN variable-name [ value ]\n\
13804 Assigns the given value to the named global variable on the server.\n\
13805 Synonyms: RASG, RASSIGN."));
13811 "Syntax: REMOTE PWD\n\
13812 Asks the Kermit server to display its current working directory.\n\
13815 "Syntax: REMOTE PWD\n\
13816 Asks the Kermit or FTP server to display its current working directory.\n\
13818 #endif /* NEWFTP */
13822 return(hmsg("Syntax: REMOTE EXIT\n\
13823 Asks the Kermit server to exit (without disconnecting), or closes an FTP\n\
13824 connection. Synonym: REXIT, and (for FTP only) BYE, FTP BYE."));
13826 return(hmsg("Syntax: REMOTE EXIT\n\
13827 Asks the Kermit server to exit. Synonym: REXIT."));
13828 #endif /* NEWFTP */
13831 if ((x = cmcfm()) < 0) return(x);
13832 printf("?Sorry, no help available - \"%s\"\n",cmdbuf);
13836 #endif /* NOXFER */
13837 #endif /* NOHELP */
projects / ckermit.git / blob